/************************************************************************
*
*
* winerror.h -- error code definitions
for the Win32 API functions *
*
*
* Copyright (c) Microsoft Corp. All rights
reserved.
*
*
*
************************************************************************/
#ifndef
_WINERROR_
#define _WINERROR_
#if
defined (_MSC_VER) && (_MSC_VER >= 1020)
&& !defined(__midl)
#pragma once
#endif
#ifndef
FORCEINLINE
#if (_MSC_VER >= 1200)
#define FORCEINLINE __forceinline
#else
#define FORCEINLINE __inline
#endif
#endif
#include <specstrings.h>
//
// Note: There is a slightly modified layout for HRESULT
values below,
//
after the heading "COM Error Codes".
//
// Values are 32 bit values laid out as follows:
//
// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8
7 6 5 4 3 2 1 0
//
+---+-+-+-----------------------+-------------------------------+
//
|Sev|C|R|
Facility
|
Code
|
//
+---+-+-+-----------------------+-------------------------------+
//
// where
//
// Sev - is the
severity code
//
//
00 - Success
//
01 - Informational
//
10 - Warning
//
11 - Error
//
// C - is the
Customer code flag
//
// R - is a reserved
bit
//
// Facility - is the
facility code
//
// Code - is the
facility's status code
//
//
// Define the facility codes
//
#define
FACILITY_XPS
82
#define
FACILITY_WINRM
51
#define
FACILITY_WINDOWSUPDATE
36
#define
FACILITY_WINDOWS_DEFENDER
80
#define
FACILITY_WINDOWS_CE
24
#define
FACILITY_WINDOWS
8
#define
FACILITY_USERMODE_VOLMGR
56
#define FACILITY_USERMODE_VIRTUALIZATION 55
#define
FACILITY_USERMODE_VHD
58
#define
FACILITY_URT
19
#define
FACILITY_UMI
22
#define
FACILITY_UI
42
#define
FACILITY_TPM_SOFTWARE
41
#define
FACILITY_TPM_SERVICES
40
#define
FACILITY_SXS
23
#define
FACILITY_STORAGE
3
#define
FACILITY_STATE_MANAGEMENT
34
#define
FACILITY_SSPI
9
#define
FACILITY_SCARD
16
#define
FACILITY_SHELL
39
#define
FACILITY_SETUPAPI
15
#define
FACILITY_SECURITY
9
#define
FACILITY_SDIAG
60
#define
FACILITY_RPC
1
#define
FACILITY_RAS
83
#define
FACILITY_PLA
48
#define
FACILITY_OPC
81
#define
FACILITY_WIN32
7
#define
FACILITY_CONTROL
10
#define
FACILITY_WEBSERVICES
61
#define
FACILITY_NULL
0
#define
FACILITY_NDIS
52
#define
FACILITY_METADIRECTORY
35
#define
FACILITY_MSMQ
14
#define
FACILITY_MEDIASERVER
13
#define
FACILITY_MBN
84
#define
FACILITY_INTERNET
12
#define
FACILITY_ITF
4
#define
FACILITY_USERMODE_HYPERVISOR 53
#define
FACILITY_HTTP
25
#define
FACILITY_GRAPHICS
38
#define
FACILITY_FWP
50
#define
FACILITY_FVE
49
#define FACILITY_USERMODE_FILTER_MANAGER 31
#define
FACILITY_DPLAY
21
#define
FACILITY_DISPATCH
2
#define
FACILITY_DIRECTORYSERVICE
37
#define
FACILITY_CONFIGURATION
33
#define
FACILITY_COMPLUS
17
#define
FACILITY_USERMODE_COMMONLOG
26
#define
FACILITY_CMI
54
#define
FACILITY_CERT
11
#define
FACILITY_BCD
57
#define
FACILITY_BACKGROUNDCOPY
32
#define
FACILITY_ACS
20
#define
FACILITY_AAF
18
//
// Define the severity codes
//
//
// MessageId: ERROR_SUCCESS
//
// MessageText:
//
// The operation completed successfully.
//
#define
ERROR_SUCCESS
0L
#define
NO_ERROR
0L
// dderror
#define
SEC_E_OK
((HRESULT)0x00000000L)
//
// MessageId: ERROR_INVALID_FUNCTION
//
// MessageText:
//
// Incorrect function.
//
#define
ERROR_INVALID_FUNCTION
1L // dderror
//
// MessageId: ERROR_FILE_NOT_FOUND
//
// MessageText:
//
// The system cannot find the file specified.
//
#define
ERROR_FILE_NOT_FOUND
2L
//
// MessageId: ERROR_PATH_NOT_FOUND
//
// MessageText:
//
// The system cannot find the path specified.
//
#define
ERROR_PATH_NOT_FOUND
3L
//
// MessageId: ERROR_TOO_MANY_OPEN_FILES
//
// MessageText:
//
// The system cannot open the file.
//
#define
ERROR_TOO_MANY_OPEN_FILES
4L
//
// MessageId: ERROR_ACCESS_DENIED
//
// MessageText:
//
// Access is denied.
//
#define
ERROR_ACCESS_DENIED
5L
//
// MessageId: ERROR_INVALID_HANDLE
//
// MessageText:
//
// The handle is invalid.
//
#define
ERROR_INVALID_HANDLE
6L
//
// MessageId: ERROR_ARENA_TRASHED
//
// MessageText:
//
// The storage control blocks were destroyed.
//
#define
ERROR_ARENA_TRASHED
7L
//
// MessageId: ERROR_NOT_ENOUGH_MEMORY
//
// MessageText:
//
// Not enough storage is available to process this command.
//
#define
ERROR_NOT_ENOUGH_MEMORY
8L // dderror
//
// MessageId: ERROR_INVALID_BLOCK
//
// MessageText:
//
// The storage control block address is invalid.
//
#define
ERROR_INVALID_BLOCK
9L
//
// MessageId: ERROR_BAD_ENVIRONMENT
//
// MessageText:
//
// The environment is incorrect.
//
#define
ERROR_BAD_ENVIRONMENT
10L
//
// MessageId: ERROR_BAD_FORMAT
//
// MessageText:
//
// An attempt was made to load a program with an incorrect format.
//
#define
ERROR_BAD_FORMAT
11L
//
// MessageId: ERROR_INVALID_ACCESS
//
// MessageText:
//
// The access code is invalid.
//
#define
ERROR_INVALID_ACCESS
12L
//
// MessageId: ERROR_INVALID_DATA
//
// MessageText:
//
// The data is invalid.
//
#define
ERROR_INVALID_DATA
13L
//
// MessageId: ERROR_OUTOFMEMORY
//
// MessageText:
//
// Not enough storage is available to complete this operation.
//
#define
ERROR_OUTOFMEMORY
14L
//
// MessageId: ERROR_INVALID_DRIVE
//
// MessageText:
//
// The system cannot find the drive specified.
//
#define
ERROR_INVALID_DRIVE
15L
//
// MessageId: ERROR_CURRENT_DIRECTORY
//
// MessageText:
//
// The directory cannot be removed.
//
#define
ERROR_CURRENT_DIRECTORY
16L
//
// MessageId: ERROR_NOT_SAME_DEVICE
//
// MessageText:
//
// The system cannot move the file to a different disk drive.
//
#define
ERROR_NOT_SAME_DEVICE
17L
//
// MessageId: ERROR_NO_MORE_FILES
//
// MessageText:
//
// There are no more files.
//
#define
ERROR_NO_MORE_FILES
18L
//
// MessageId: ERROR_WRITE_PROTECT
//
// MessageText:
//
// The media is write protected.
//
#define
ERROR_WRITE_PROTECT
19L
//
// MessageId: ERROR_BAD_UNIT
//
// MessageText:
//
// The system cannot find the device specified.
//
#define
ERROR_BAD_UNIT
20L
//
// MessageId: ERROR_NOT_READY
//
// MessageText:
//
// The device is not ready.
//
#define
ERROR_NOT_READY
21L
//
// MessageId: ERROR_BAD_COMMAND
//
// MessageText:
//
// The device does not recognize the command.
//
#define
ERROR_BAD_COMMAND
22L
//
// MessageId: ERROR_CRC
//
// MessageText:
//
// Data error (cyclic redundancy check).
//
#define
ERROR_CRC
23L
//
// MessageId: ERROR_BAD_LENGTH
//
// MessageText:
//
// The program issued a command but the command length is incorrect.
//
#define
ERROR_BAD_LENGTH
24L
//
// MessageId: ERROR_SEEK
//
// MessageText:
//
// The drive cannot locate a specific area or track on the disk.
//
#define
ERROR_SEEK
25L
//
// MessageId: ERROR_NOT_DOS_DISK
//
// MessageText:
//
// The specified disk or diskette cannot be accessed.
//
#define
ERROR_NOT_DOS_DISK
26L
//
// MessageId: ERROR_SECTOR_NOT_FOUND
//
// MessageText:
//
// The drive cannot find the sector requested.
//
#define
ERROR_SECTOR_NOT_FOUND
27L
//
// MessageId: ERROR_OUT_OF_PAPER
//
// MessageText:
//
// The printer is out of paper.
//
#define
ERROR_OUT_OF_PAPER
28L
//
// MessageId: ERROR_WRITE_FAULT
//
// MessageText:
//
// The system cannot write to the specified device.
//
#define
ERROR_WRITE_FAULT
29L
//
// MessageId: ERROR_READ_FAULT
//
// MessageText:
//
// The system cannot read from the specified device.
//
#define
ERROR_READ_FAULT
30L
//
// MessageId: ERROR_GEN_FAILURE
//
// MessageText:
//
// A device attached to the system is not functioning.
//
#define
ERROR_GEN_FAILURE
31L
//
// MessageId: ERROR_SHARING_VIOLATION
//
// MessageText:
//
// The process cannot access the file because it is being used by
another process.
//
#define
ERROR_SHARING_VIOLATION
32L
//
// MessageId: ERROR_LOCK_VIOLATION
//
// MessageText:
//
// The process cannot access the file because another process has
locked a portion of the file.
//
#define
ERROR_LOCK_VIOLATION
33L
//
// MessageId: ERROR_WRONG_DISK
//
// MessageText:
//
// The wrong diskette is in the drive.
// Insert %2 (Volume Serial Number: %3) into drive %1.
//
#define
ERROR_WRONG_DISK
34L
//
// MessageId: ERROR_SHARING_BUFFER_EXCEEDED
//
// MessageText:
//
// Too many files opened for sharing.
//
#define ERROR_SHARING_BUFFER_EXCEEDED 36L
//
// MessageId: ERROR_HANDLE_EOF
//
// MessageText:
//
// Reached the end of the file.
//
#define
ERROR_HANDLE_EOF
38L
//
// MessageId: ERROR_HANDLE_DISK_FULL
//
// MessageText:
//
// The disk is full.
//
#define
ERROR_HANDLE_DISK_FULL
39L
//
// MessageId: ERROR_NOT_SUPPORTED
//
// MessageText:
//
// The request is not supported.
//
#define
ERROR_NOT_SUPPORTED
50L
//
// MessageId: ERROR_REM_NOT_LIST
//
// MessageText:
//
//
Windows cannot find the network path. Verify that the network path is
correct and the destination computer is not busy or turned off. If
Windows still cannot find the network path, contact your network
administrator.
//
#define
ERROR_REM_NOT_LIST
51L
//
// MessageId: ERROR_DUP_NAME
//
// MessageText:
//
//
You were not connected because a duplicate name exists on the network.
If joining a domain, go to System in Control Panel to change the
computer name and try again. If joining a workgroup, choose another
workgroup name.
//
#define
ERROR_DUP_NAME
52L
//
// MessageId: ERROR_BAD_NETPATH
//
// MessageText:
//
// The network path was not found.
//
#define
ERROR_BAD_NETPATH
53L
//
// MessageId: ERROR_NETWORK_BUSY
//
// MessageText:
//
// The network is busy.
//
#define
ERROR_NETWORK_BUSY
54L
//
// MessageId: ERROR_DEV_NOT_EXIST
//
// MessageText:
//
// The specified network resource or device is no longer available.
//
#define
ERROR_DEV_NOT_EXIST
55L // dderror
//
// MessageId: ERROR_TOO_MANY_CMDS
//
// MessageText:
//
// The network BIOS command limit has been reached.
//
#define
ERROR_TOO_MANY_CMDS
56L
//
// MessageId: ERROR_ADAP_HDW_ERR
//
// MessageText:
//
// A network adapter hardware error occurred.
//
#define
ERROR_ADAP_HDW_ERR
57L
//
// MessageId: ERROR_BAD_NET_RESP
//
// MessageText:
//
// The specified server cannot perform the requested operation.
//
#define
ERROR_BAD_NET_RESP
58L
//
// MessageId: ERROR_UNEXP_NET_ERR
//
// MessageText:
//
// An unexpected network error occurred.
//
#define
ERROR_UNEXP_NET_ERR
59L
//
// MessageId: ERROR_BAD_REM_ADAP
//
// MessageText:
//
// The remote adapter is not compatible.
//
#define
ERROR_BAD_REM_ADAP
60L
//
// MessageId: ERROR_PRINTQ_FULL
//
// MessageText:
//
// The printer queue is full.
//
#define
ERROR_PRINTQ_FULL
61L
//
// MessageId: ERROR_NO_SPOOL_SPACE
//
// MessageText:
//
// Space to store the file waiting to be printed is not available on
the server.
//
#define
ERROR_NO_SPOOL_SPACE
62L
//
// MessageId: ERROR_PRINT_CANCELLED
//
// MessageText:
//
// Your file waiting to be printed was deleted.
//
#define
ERROR_PRINT_CANCELLED
63L
//
// MessageId: ERROR_NETNAME_DELETED
//
// MessageText:
//
// The specified network name is no longer available.
//
#define
ERROR_NETNAME_DELETED
64L
//
// MessageId: ERROR_NETWORK_ACCESS_DENIED
//
// MessageText:
//
// Network access is denied.
//
#define
ERROR_NETWORK_ACCESS_DENIED
65L
//
// MessageId: ERROR_BAD_DEV_TYPE
//
// MessageText:
//
// The network resource type is not correct.
//
#define
ERROR_BAD_DEV_TYPE
66L
//
// MessageId: ERROR_BAD_NET_NAME
//
// MessageText:
//
// The network name cannot be found.
//
#define
ERROR_BAD_NET_NAME
67L
//
// MessageId: ERROR_TOO_MANY_NAMES
//
// MessageText:
//
// The name limit for the local computer network adapter card was
exceeded.
//
#define
ERROR_TOO_MANY_NAMES
68L
//
// MessageId: ERROR_TOO_MANY_SESS
//
// MessageText:
//
// The network BIOS session limit was exceeded.
//
#define
ERROR_TOO_MANY_SESS
69L
//
// MessageId: ERROR_SHARING_PAUSED
//
// MessageText:
//
// The remote server has been paused or is in the process of being
started.
//
#define
ERROR_SHARING_PAUSED
70L
//
// MessageId: ERROR_REQ_NOT_ACCEP
//
// MessageText:
//
//
No more connections can be made to this remote computer at this time
because there are already as many connections as the computer can
accept.
//
#define
ERROR_REQ_NOT_ACCEP
71L
//
// MessageId: ERROR_REDIR_PAUSED
//
// MessageText:
//
// The specified printer or disk device has been paused.
//
#define
ERROR_REDIR_PAUSED
72L
//
// MessageId: ERROR_FILE_EXISTS
//
// MessageText:
//
// The file exists.
//
#define
ERROR_FILE_EXISTS
80L
//
// MessageId: ERROR_CANNOT_MAKE
//
// MessageText:
//
// The directory or file cannot be created.
//
#define
ERROR_CANNOT_MAKE
82L
//
// MessageId: ERROR_FAIL_I24
//
// MessageText:
//
// Fail on INT 24.
//
#define
ERROR_FAIL_I24
83L
//
// MessageId: ERROR_OUT_OF_STRUCTURES
//
// MessageText:
//
// Storage to process this request is not available.
//
#define
ERROR_OUT_OF_STRUCTURES
84L
//
// MessageId: ERROR_ALREADY_ASSIGNED
//
// MessageText:
//
// The local device name is already in use.
//
#define
ERROR_ALREADY_ASSIGNED
85L
//
// MessageId: ERROR_INVALID_PASSWORD
//
// MessageText:
//
// The specified network password is not correct.
//
#define
ERROR_INVALID_PASSWORD
86L
//
// MessageId: ERROR_INVALID_PARAMETER
//
// MessageText:
//
// The parameter is incorrect.
//
#define
ERROR_INVALID_PARAMETER
87L // dderror
//
// MessageId: ERROR_NET_WRITE_FAULT
//
// MessageText:
//
// A write fault occurred on the network.
//
#define
ERROR_NET_WRITE_FAULT
88L
//
// MessageId: ERROR_NO_PROC_SLOTS
//
// MessageText:
//
// The system cannot start another process at this time.
//
#define
ERROR_NO_PROC_SLOTS
89L
//
// MessageId: ERROR_TOO_MANY_SEMAPHORES
//
// MessageText:
//
// Cannot create another system semaphore.
//
#define
ERROR_TOO_MANY_SEMAPHORES
100L
//
// MessageId: ERROR_EXCL_SEM_ALREADY_OWNED
//
// MessageText:
//
// The exclusive semaphore is owned by another process.
//
#define
ERROR_EXCL_SEM_ALREADY_OWNED
101L
//
// MessageId: ERROR_SEM_IS_SET
//
// MessageText:
//
// The semaphore is set and cannot be closed.
//
#define
ERROR_SEM_IS_SET
102L
//
// MessageId: ERROR_TOO_MANY_SEM_REQUESTS
//
// MessageText:
//
// The semaphore cannot be set again.
//
#define
ERROR_TOO_MANY_SEM_REQUESTS
103L
//
// MessageId: ERROR_INVALID_AT_INTERRUPT_TIME
//
// MessageText:
//
// Cannot request exclusive semaphores at interrupt time.
//
#define ERROR_INVALID_AT_INTERRUPT_TIME 104L
//
// MessageId: ERROR_SEM_OWNER_DIED
//
// MessageText:
//
// The previous ownership of this semaphore has ended.
//
#define
ERROR_SEM_OWNER_DIED
105L
//
// MessageId: ERROR_SEM_USER_LIMIT
//
// MessageText:
//
// Insert the diskette for drive %1.
//
#define
ERROR_SEM_USER_LIMIT
106L
//
// MessageId: ERROR_DISK_CHANGE
//
// MessageText:
//
// The program stopped because an alternate diskette was not inserted.
//
#define
ERROR_DISK_CHANGE
107L
//
// MessageId: ERROR_DRIVE_LOCKED
//
// MessageText:
//
// The disk is in use or locked by another process.
//
#define
ERROR_DRIVE_LOCKED
108L
//
// MessageId: ERROR_BROKEN_PIPE
//
// MessageText:
//
// The pipe has been ended.
//
#define
ERROR_BROKEN_PIPE
109L
//
// MessageId: ERROR_OPEN_FAILED
//
// MessageText:
//
// The system cannot open the device or file specified.
//
#define
ERROR_OPEN_FAILED
110L
//
// MessageId: ERROR_BUFFER_OVERFLOW
//
// MessageText:
//
// The file name is too long.
//
#define
ERROR_BUFFER_OVERFLOW
111L
//
// MessageId: ERROR_DISK_FULL
//
// MessageText:
//
// There is not enough space on the disk.
//
#define
ERROR_DISK_FULL
112L
//
// MessageId: ERROR_NO_MORE_SEARCH_HANDLES
//
// MessageText:
//
// No more internal file identifiers available.
//
#define
ERROR_NO_MORE_SEARCH_HANDLES
113L
//
// MessageId: ERROR_INVALID_TARGET_HANDLE
//
// MessageText:
//
// The target internal file identifier is incorrect.
//
#define
ERROR_INVALID_TARGET_HANDLE
114L
//
// MessageId: ERROR_INVALID_CATEGORY
//
// MessageText:
//
// The IOCTL call made by the application program is not correct.
//
#define
ERROR_INVALID_CATEGORY
117L
//
// MessageId: ERROR_INVALID_VERIFY_SWITCH
//
// MessageText:
//
// The verify-on-write switch parameter value is not correct.
//
#define
ERROR_INVALID_VERIFY_SWITCH
118L
//
// MessageId: ERROR_BAD_DRIVER_LEVEL
//
// MessageText:
//
// The system does not support the command requested.
//
#define
ERROR_BAD_DRIVER_LEVEL
119L
//
// MessageId: ERROR_CALL_NOT_IMPLEMENTED
//
// MessageText:
//
// This function is not supported on this system.
//
#define
ERROR_CALL_NOT_IMPLEMENTED
120L
//
// MessageId: ERROR_SEM_TIMEOUT
//
// MessageText:
//
// The semaphore timeout period has expired.
//
#define
ERROR_SEM_TIMEOUT
121L
//
// MessageId: ERROR_INSUFFICIENT_BUFFER
//
// MessageText:
//
// The data area passed to a system call is too small.
//
#define
ERROR_INSUFFICIENT_BUFFER
122L // dderror
//
// MessageId: ERROR_INVALID_NAME
//
// MessageText:
//
// The filename, directory name, or volume label syntax is incorrect.
//
#define
ERROR_INVALID_NAME
123L // dderror
//
// MessageId: ERROR_INVALID_LEVEL
//
// MessageText:
//
// The system call level is not correct.
//
#define
ERROR_INVALID_LEVEL
124L
//
// MessageId: ERROR_NO_VOLUME_LABEL
//
// MessageText:
//
// The disk has no volume label.
//
#define
ERROR_NO_VOLUME_LABEL
125L
//
// MessageId: ERROR_MOD_NOT_FOUND
//
// MessageText:
//
// The specified module could not be found.
//
#define
ERROR_MOD_NOT_FOUND
126L
//
// MessageId: ERROR_PROC_NOT_FOUND
//
// MessageText:
//
// The specified procedure could not be found.
//
#define
ERROR_PROC_NOT_FOUND
127L
//
// MessageId: ERROR_WAIT_NO_CHILDREN
//
// MessageText:
//
// There are no child processes to wait for.
//
#define
ERROR_WAIT_NO_CHILDREN
128L
//
// MessageId: ERROR_CHILD_NOT_COMPLETE
//
// MessageText:
//
// The %1 application cannot be run in Win32 mode.
//
#define
ERROR_CHILD_NOT_COMPLETE
129L
//
// MessageId: ERROR_DIRECT_ACCESS_HANDLE
//
// MessageText:
//
// Attempt to use a file handle to an open disk partition for an
operation other than raw disk I/O.
//
#define
ERROR_DIRECT_ACCESS_HANDLE
130L
//
// MessageId: ERROR_NEGATIVE_SEEK
//
// MessageText:
//
// An attempt was made to move the file pointer before the beginning of
the file.
//
#define
ERROR_NEGATIVE_SEEK
131L
//
// MessageId: ERROR_SEEK_ON_DEVICE
//
// MessageText:
//
// The file pointer cannot be set on the specified device or file.
//
#define
ERROR_SEEK_ON_DEVICE
132L
//
// MessageId: ERROR_IS_JOIN_TARGET
//
// MessageText:
//
// A JOIN or SUBST command cannot be used for a drive that contains
previously joined drives.
//
#define
ERROR_IS_JOIN_TARGET
133L
//
// MessageId: ERROR_IS_JOINED
//
// MessageText:
//
// An attempt was made to use a JOIN or SUBST command on a drive that
has already been joined.
//
#define
ERROR_IS_JOINED
134L
//
// MessageId: ERROR_IS_SUBSTED
//
// MessageText:
//
// An attempt was made to use a JOIN or SUBST command on a drive that
has already been substituted.
//
#define
ERROR_IS_SUBSTED
135L
//
// MessageId: ERROR_NOT_JOINED
//
// MessageText:
//
// The system tried to delete the JOIN of a drive that is not joined.
//
#define
ERROR_NOT_JOINED
136L
//
// MessageId: ERROR_NOT_SUBSTED
//
// MessageText:
//
// The system tried to delete the substitution of a drive that is not
substituted.
//
#define
ERROR_NOT_SUBSTED
137L
//
// MessageId: ERROR_JOIN_TO_JOIN
//
// MessageText:
//
// The system tried to join a drive to a directory on a joined drive.
//
#define
ERROR_JOIN_TO_JOIN
138L
//
// MessageId: ERROR_SUBST_TO_SUBST
//
// MessageText:
//
// The system tried to substitute a drive to a directory on a
substituted drive.
//
#define
ERROR_SUBST_TO_SUBST
139L
//
// MessageId: ERROR_JOIN_TO_SUBST
//
// MessageText:
//
// The system tried to join a drive to a directory on a substituted
drive.
//
#define
ERROR_JOIN_TO_SUBST
140L
//
// MessageId: ERROR_SUBST_TO_JOIN
//
// MessageText:
//
// The system tried to SUBST a drive to a directory on a joined drive.
//
#define
ERROR_SUBST_TO_JOIN
141L
//
// MessageId: ERROR_BUSY_DRIVE
//
// MessageText:
//
// The system cannot perform a JOIN or SUBST at this time.
//
#define
ERROR_BUSY_DRIVE
142L
//
// MessageId: ERROR_SAME_DRIVE
//
// MessageText:
//
// The system cannot join or substitute a drive to or for a directory
on the same drive.
//
#define
ERROR_SAME_DRIVE
143L
//
// MessageId: ERROR_DIR_NOT_ROOT
//
// MessageText:
//
// The directory is not a subdirectory of the root directory.
//
#define
ERROR_DIR_NOT_ROOT
144L
//
// MessageId: ERROR_DIR_NOT_EMPTY
//
// MessageText:
//
// The directory is not empty.
//
#define
ERROR_DIR_NOT_EMPTY
145L
//
// MessageId: ERROR_IS_SUBST_PATH
//
// MessageText:
//
// The path specified is being used in a substitute.
//
#define
ERROR_IS_SUBST_PATH
146L
//
// MessageId: ERROR_IS_JOIN_PATH
//
// MessageText:
//
// Not enough resources are available to process this command.
//
#define
ERROR_IS_JOIN_PATH
147L
//
// MessageId: ERROR_PATH_BUSY
//
// MessageText:
//
// The path specified cannot be used at this time.
//
#define
ERROR_PATH_BUSY
148L
//
// MessageId: ERROR_IS_SUBST_TARGET
//
// MessageText:
//
// An attempt was made to join or substitute a drive for which a
directory on the drive is the target of a previous substitute.
//
#define
ERROR_IS_SUBST_TARGET
149L
//
// MessageId: ERROR_SYSTEM_TRACE
//
// MessageText:
//
// System trace information was not specified in your CONFIG.SYS file,
or tracing is disallowed.
//
#define
ERROR_SYSTEM_TRACE
150L
//
// MessageId: ERROR_INVALID_EVENT_COUNT
//
// MessageText:
//
// The number of specified semaphore events for DosMuxSemWait is not
correct.
//
#define
ERROR_INVALID_EVENT_COUNT
151L
//
// MessageId: ERROR_TOO_MANY_MUXWAITERS
//
// MessageText:
//
// DosMuxSemWait did not execute; too many semaphores are already set.
//
#define
ERROR_TOO_MANY_MUXWAITERS
152L
//
// MessageId: ERROR_INVALID_LIST_FORMAT
//
// MessageText:
//
// The DosMuxSemWait list is not correct.
//
#define
ERROR_INVALID_LIST_FORMAT
153L
//
// MessageId: ERROR_LABEL_TOO_LONG
//
// MessageText:
//
// The volume label you entered exceeds the label character limit of
the target file system.
//
#define
ERROR_LABEL_TOO_LONG
154L
//
// MessageId: ERROR_TOO_MANY_TCBS
//
// MessageText:
//
// Cannot create another thread.
//
#define
ERROR_TOO_MANY_TCBS
155L
//
// MessageId: ERROR_SIGNAL_REFUSED
//
// MessageText:
//
// The recipient process has refused the signal.
//
#define
ERROR_SIGNAL_REFUSED
156L
//
// MessageId: ERROR_DISCARDED
//
// MessageText:
//
// The segment is already discarded and cannot be locked.
//
#define
ERROR_DISCARDED
157L
//
// MessageId: ERROR_NOT_LOCKED
//
// MessageText:
//
// The segment is already unlocked.
//
#define
ERROR_NOT_LOCKED
158L
//
// MessageId: ERROR_BAD_THREADID_ADDR
//
// MessageText:
//
// The address for the thread ID is not correct.
//
#define
ERROR_BAD_THREADID_ADDR
159L
//
// MessageId: ERROR_BAD_ARGUMENTS
//
// MessageText:
//
// One or more arguments are not correct.
//
#define
ERROR_BAD_ARGUMENTS
160L
//
// MessageId: ERROR_BAD_PATHNAME
//
// MessageText:
//
// The specified path is invalid.
//
#define
ERROR_BAD_PATHNAME
161L
//
// MessageId: ERROR_SIGNAL_PENDING
//
// MessageText:
//
// A signal is already pending.
//
#define
ERROR_SIGNAL_PENDING
162L
//
// MessageId: ERROR_MAX_THRDS_REACHED
//
// MessageText:
//
// No more threads can be created in the system.
//
#define
ERROR_MAX_THRDS_REACHED
164L
//
// MessageId: ERROR_LOCK_FAILED
//
// MessageText:
//
// Unable to lock a region of a file.
//
#define
ERROR_LOCK_FAILED
167L
//
// MessageId: ERROR_BUSY
//
// MessageText:
//
// The requested resource is in use.
//
#define
ERROR_BUSY
170L // dderror
//
// MessageId: ERROR_CANCEL_VIOLATION
//
// MessageText:
//
// A lock request was not outstanding for the supplied cancel region.
//
#define
ERROR_CANCEL_VIOLATION
173L
//
// MessageId: ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
//
// MessageText:
//
// The file system does not support atomic changes to the lock type.
//
#define ERROR_ATOMIC_LOCKS_NOT_SUPPORTED 174L
//
// MessageId: ERROR_INVALID_SEGMENT_NUMBER
//
// MessageText:
//
// The system detected a segment number that was not correct.
//
#define
ERROR_INVALID_SEGMENT_NUMBER
180L
//
// MessageId: ERROR_INVALID_ORDINAL
//
// MessageText:
//
// The operating system cannot run %1.
//
#define
ERROR_INVALID_ORDINAL
182L
//
// MessageId: ERROR_ALREADY_EXISTS
//
// MessageText:
//
// Cannot create a file when that file already exists.
//
#define
ERROR_ALREADY_EXISTS
183L
//
// MessageId: ERROR_INVALID_FLAG_NUMBER
//
// MessageText:
//
// The flag passed is not correct.
//
#define
ERROR_INVALID_FLAG_NUMBER
186L
//
// MessageId: ERROR_SEM_NOT_FOUND
//
// MessageText:
//
// The specified system semaphore name was not found.
//
#define
ERROR_SEM_NOT_FOUND
187L
//
// MessageId: ERROR_INVALID_STARTING_CODESEG
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_INVALID_STARTING_CODESEG 188L
//
// MessageId: ERROR_INVALID_STACKSEG
//
// MessageText:
//
// The operating system cannot run %1.
//
#define
ERROR_INVALID_STACKSEG
189L
//
// MessageId: ERROR_INVALID_MODULETYPE
//
// MessageText:
//
// The operating system cannot run %1.
//
#define
ERROR_INVALID_MODULETYPE
190L
//
// MessageId: ERROR_INVALID_EXE_SIGNATURE
//
// MessageText:
//
// Cannot run %1 in Win32 mode.
//
#define
ERROR_INVALID_EXE_SIGNATURE
191L
//
// MessageId: ERROR_EXE_MARKED_INVALID
//
// MessageText:
//
// The operating system cannot run %1.
//
#define
ERROR_EXE_MARKED_INVALID
192L
//
// MessageId: ERROR_BAD_EXE_FORMAT
//
// MessageText:
//
// %1 is not a valid Win32 application.
//
#define
ERROR_BAD_EXE_FORMAT
193L
//
// MessageId: ERROR_ITERATED_DATA_EXCEEDS_64k
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_ITERATED_DATA_EXCEEDS_64k 194L
//
// MessageId: ERROR_INVALID_MINALLOCSIZE
//
// MessageText:
//
// The operating system cannot run %1.
//
#define
ERROR_INVALID_MINALLOCSIZE
195L
//
// MessageId: ERROR_DYNLINK_FROM_INVALID_RING
//
// MessageText:
//
// The operating system cannot run this application program.
//
#define ERROR_DYNLINK_FROM_INVALID_RING 196L
//
// MessageId: ERROR_IOPL_NOT_ENABLED
//
// MessageText:
//
// The operating system is not presently configured to run this
application.
//
#define
ERROR_IOPL_NOT_ENABLED
197L
//
// MessageId: ERROR_INVALID_SEGDPL
//
// MessageText:
//
// The operating system cannot run %1.
//
#define
ERROR_INVALID_SEGDPL
198L
//
// MessageId: ERROR_AUTODATASEG_EXCEEDS_64k
//
// MessageText:
//
// The operating system cannot run this application program.
//
#define ERROR_AUTODATASEG_EXCEEDS_64k 199L
//
// MessageId: ERROR_RING2SEG_MUST_BE_MOVABLE
//
// MessageText:
//
// The code segment cannot be greater than or equal to 64K.
//
#define ERROR_RING2SEG_MUST_BE_MOVABLE 200L
//
// MessageId: ERROR_RELOC_CHAIN_XEEDS_SEGLIM
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_RELOC_CHAIN_XEEDS_SEGLIM 201L
//
// MessageId: ERROR_INFLOOP_IN_RELOC_CHAIN
//
// MessageText:
//
// The operating system cannot run %1.
//
#define
ERROR_INFLOOP_IN_RELOC_CHAIN
202L
//
// MessageId: ERROR_ENVVAR_NOT_FOUND
//
// MessageText:
//
// The system could not find the environment option that was entered.
//
#define
ERROR_ENVVAR_NOT_FOUND
203L
//
// MessageId: ERROR_NO_SIGNAL_SENT
//
// MessageText:
//
// No process in the command subtree has a signal handler.
//
#define
ERROR_NO_SIGNAL_SENT
205L
//
// MessageId: ERROR_FILENAME_EXCED_RANGE
//
// MessageText:
//
// The filename or extension is too long.
//
#define
ERROR_FILENAME_EXCED_RANGE
206L
//
// MessageId: ERROR_RING2_STACK_IN_USE
//
// MessageText:
//
// The ring 2 stack is in use.
//
#define
ERROR_RING2_STACK_IN_USE
207L
//
// MessageId: ERROR_META_EXPANSION_TOO_LONG
//
// MessageText:
//
// The global filename characters, * or ?, are entered incorrectly or
too many global filename characters are specified.
//
#define ERROR_META_EXPANSION_TOO_LONG 208L
//
// MessageId: ERROR_INVALID_SIGNAL_NUMBER
//
// MessageText:
//
// The signal being posted is not correct.
//
#define
ERROR_INVALID_SIGNAL_NUMBER
209L
//
// MessageId: ERROR_THREAD_1_INACTIVE
//
// MessageText:
//
// The signal handler cannot be set.
//
#define
ERROR_THREAD_1_INACTIVE
210L
//
// MessageId: ERROR_LOCKED
//
// MessageText:
//
// The segment is locked and cannot be reallocated.
//
#define
ERROR_LOCKED
212L
//
// MessageId: ERROR_TOO_MANY_MODULES
//
// MessageText:
//
// Too many dynamic-link modules are attached to this program or
dynamic-link module.
//
#define
ERROR_TOO_MANY_MODULES
214L
//
// MessageId: ERROR_NESTING_NOT_ALLOWED
//
// MessageText:
//
// Cannot nest calls to LoadModule.
//
#define
ERROR_NESTING_NOT_ALLOWED
215L
//
// MessageId: ERROR_EXE_MACHINE_TYPE_MISMATCH
//
// MessageText:
//
//
This version of %1 is not compatible with the version of Windows you're
running. Check your computer's system information to see whether you
need a x86 (32-bit) or x64 (64-bit) version of the program, and then
contact the software publisher.
//
#define ERROR_EXE_MACHINE_TYPE_MISMATCH 216L
//
// MessageId: ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY
//
// MessageText:
//
// The image file %1 is signed, unable to modify.
//
#define ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY 217L
//
// MessageId: ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY
//
// MessageText:
//
// The image file %1 is strong signed, unable to modify.
//
#define ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY 218L
//
// MessageId: ERROR_FILE_CHECKED_OUT
//
// MessageText:
//
// This file is checked out or locked for editing by another user.
//
#define
ERROR_FILE_CHECKED_OUT
220L
//
// MessageId: ERROR_CHECKOUT_REQUIRED
//
// MessageText:
//
// The file must be checked out before saving changes.
//
#define
ERROR_CHECKOUT_REQUIRED
221L
//
// MessageId: ERROR_BAD_FILE_TYPE
//
// MessageText:
//
// The file type being saved or retrieved has been blocked.
//
#define
ERROR_BAD_FILE_TYPE
222L
//
// MessageId: ERROR_FILE_TOO_LARGE
//
// MessageText:
//
// The file size exceeds the limit allowed and cannot be saved.
//
#define
ERROR_FILE_TOO_LARGE
223L
//
// MessageId: ERROR_FORMS_AUTH_REQUIRED
//
// MessageText:
//
//
Access Denied. Before opening files in this location, you must first
add the web site to your trusted sites list, browse to the web site,
and select the option to login automatically.
//
#define
ERROR_FORMS_AUTH_REQUIRED
224L
//
// MessageId: ERROR_VIRUS_INFECTED
//
// MessageText:
//
// Operation did not complete successfully because the file contains a
virus.
//
#define
ERROR_VIRUS_INFECTED
225L
//
// MessageId: ERROR_VIRUS_DELETED
//
// MessageText:
//
//
This file contains a virus and cannot be opened. Due to the nature of
this virus, the file has been removed from this location.
//
#define
ERROR_VIRUS_DELETED
226L
//
// MessageId: ERROR_PIPE_LOCAL
//
// MessageText:
//
// The pipe is local.
//
#define
ERROR_PIPE_LOCAL
229L
//
// MessageId: ERROR_BAD_PIPE
//
// MessageText:
//
// The pipe state is invalid.
//
#define
ERROR_BAD_PIPE
230L
//
// MessageId: ERROR_PIPE_BUSY
//
// MessageText:
//
// All pipe instances are busy.
//
#define
ERROR_PIPE_BUSY
231L
//
// MessageId: ERROR_NO_DATA
//
// MessageText:
//
// The pipe is being closed.
//
#define
ERROR_NO_DATA
232L
//
// MessageId: ERROR_PIPE_NOT_CONNECTED
//
// MessageText:
//
// No process is on the other end of the pipe.
//
#define
ERROR_PIPE_NOT_CONNECTED
233L
//
// MessageId: ERROR_MORE_DATA
//
// MessageText:
//
// More data is available.
//
#define
ERROR_MORE_DATA
234L // dderror
//
// MessageId: ERROR_VC_DISCONNECTED
//
// MessageText:
//
// The session was canceled.
//
#define
ERROR_VC_DISCONNECTED
240L
//
// MessageId: ERROR_INVALID_EA_NAME
//
// MessageText:
//
// The specified extended attribute name was invalid.
//
#define
ERROR_INVALID_EA_NAME
254L
//
// MessageId: ERROR_EA_LIST_INCONSISTENT
//
// MessageText:
//
// The extended attributes are inconsistent.
//
#define
ERROR_EA_LIST_INCONSISTENT
255L
//
// MessageId: WAIT_TIMEOUT
//
// MessageText:
//
// The wait operation timed out.
//
#define
WAIT_TIMEOUT
258L // dderror
//
// MessageId: ERROR_NO_MORE_ITEMS
//
// MessageText:
//
// No more data is available.
//
#define
ERROR_NO_MORE_ITEMS
259L
//
// MessageId: ERROR_CANNOT_COPY
//
// MessageText:
//
// The copy functions cannot be used.
//
#define
ERROR_CANNOT_COPY
266L
//
// MessageId: ERROR_DIRECTORY
//
// MessageText:
//
// The directory name is invalid.
//
#define
ERROR_DIRECTORY
267L
//
// MessageId: ERROR_EAS_DIDNT_FIT
//
// MessageText:
//
// The extended attributes did not fit in the buffer.
//
#define
ERROR_EAS_DIDNT_FIT
275L
//
// MessageId: ERROR_EA_FILE_CORRUPT
//
// MessageText:
//
// The extended attribute file on the mounted file system is corrupt.
//
#define
ERROR_EA_FILE_CORRUPT
276L
//
// MessageId: ERROR_EA_TABLE_FULL
//
// MessageText:
//
// The extended attribute table file is full.
//
#define
ERROR_EA_TABLE_FULL
277L
//
// MessageId: ERROR_INVALID_EA_HANDLE
//
// MessageText:
//
// The specified extended attribute handle is invalid.
//
#define
ERROR_INVALID_EA_HANDLE
278L
//
// MessageId: ERROR_EAS_NOT_SUPPORTED
//
// MessageText:
//
// The mounted file system does not support extended attributes.
//
#define
ERROR_EAS_NOT_SUPPORTED
282L
//
// MessageId: ERROR_NOT_OWNER
//
// MessageText:
//
// Attempt to release mutex not owned by caller.
//
#define
ERROR_NOT_OWNER
288L
//
// MessageId: ERROR_TOO_MANY_POSTS
//
// MessageText:
//
// Too many posts were made to a semaphore.
//
#define
ERROR_TOO_MANY_POSTS
298L
//
// MessageId: ERROR_PARTIAL_COPY
//
// MessageText:
//
// Only part of a ReadProcessMemory or WriteProcessMemory request was
completed.
//
#define
ERROR_PARTIAL_COPY
299L
//
// MessageId: ERROR_OPLOCK_NOT_GRANTED
//
// MessageText:
//
// The oplock request is denied.
//
#define
ERROR_OPLOCK_NOT_GRANTED
300L
//
// MessageId: ERROR_INVALID_OPLOCK_PROTOCOL
//
// MessageText:
//
// An invalid oplock acknowledgment was received by the system.
//
#define ERROR_INVALID_OPLOCK_PROTOCOL 301L
//
// MessageId: ERROR_DISK_TOO_FRAGMENTED
//
// MessageText:
//
// The volume is too fragmented to complete this operation.
//
#define
ERROR_DISK_TOO_FRAGMENTED
302L
//
// MessageId: ERROR_DELETE_PENDING
//
// MessageText:
//
// The file cannot be opened because it is in the process of being
deleted.
//
#define
ERROR_DELETE_PENDING
303L
//
// MessageId: ERROR_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING
//
// MessageText:
//
// Short name settings may not be changed on this volume due to the
global registry setting.
//
#define ERROR_INCOMPATIBLE_WITH_GLOBAL_SHORT_NAME_REGISTRY_SETTING 304L
//
// MessageId: ERROR_SHORT_NAMES_NOT_ENABLED_ON_VOLUME
//
// MessageText:
//
// Short names are not enabled on this volume.
//
#define ERROR_SHORT_NAMES_NOT_ENABLED_ON_VOLUME 305L
//
// MessageId: ERROR_SECURITY_STREAM_IS_INCONSISTENT
//
// MessageText:
//
// The security stream for the given volume is in an inconsistent state.
// Please run CHKDSK on the volume.
//
#define ERROR_SECURITY_STREAM_IS_INCONSISTENT 306L
//
// MessageId: ERROR_INVALID_LOCK_RANGE
//
// MessageText:
//
// A requested file lock operation cannot be processed due to an
invalid byte range.
//
#define
ERROR_INVALID_LOCK_RANGE
307L
//
// MessageId: ERROR_IMAGE_SUBSYSTEM_NOT_PRESENT
//
// MessageText:
//
// The subsystem needed to support the image type is not present.
//
#define ERROR_IMAGE_SUBSYSTEM_NOT_PRESENT 308L
//
// MessageId: ERROR_NOTIFICATION_GUID_ALREADY_DEFINED
//
// MessageText:
//
// The specified file already has a notification GUID associated with
it.
//
#define ERROR_NOTIFICATION_GUID_ALREADY_DEFINED 309L
//
// Available SYSTEM error code
//
//
// MessageId: ERROR_MR_MID_NOT_FOUND
//
// MessageText:
//
// The system cannot find message text for message number 0x%1 in the
message file for %2.
//
#define
ERROR_MR_MID_NOT_FOUND
317L
//
// MessageId: ERROR_SCOPE_NOT_FOUND
//
// MessageText:
//
// The scope specified was not found.
//
#define
ERROR_SCOPE_NOT_FOUND
318L
//
// MessageId: ERROR_FAIL_NOACTION_REBOOT
//
// MessageText:
//
// No action was taken as a system reboot is required.
//
#define
ERROR_FAIL_NOACTION_REBOOT
350L
//
// MessageId: ERROR_FAIL_SHUTDOWN
//
// MessageText:
//
// The shutdown operation failed.
//
#define
ERROR_FAIL_SHUTDOWN
351L
//
// MessageId: ERROR_FAIL_RESTART
//
// MessageText:
//
// The restart operation failed.
//
#define
ERROR_FAIL_RESTART
352L
//
// MessageId: ERROR_MAX_SESSIONS_REACHED
//
// MessageText:
//
// The maximum number of sessions has been reached.
//
#define
ERROR_MAX_SESSIONS_REACHED
353L
//
// MessageId: ERROR_THREAD_MODE_ALREADY_BACKGROUND
//
// MessageText:
//
// The thread is already in background processing mode.
//
#define ERROR_THREAD_MODE_ALREADY_BACKGROUND 400L
//
// MessageId: ERROR_THREAD_MODE_NOT_BACKGROUND
//
// MessageText:
//
// The thread is not in background processing mode.
//
#define ERROR_THREAD_MODE_NOT_BACKGROUND 401L
//
// MessageId: ERROR_PROCESS_MODE_ALREADY_BACKGROUND
//
// MessageText:
//
// The process is already in background processing mode.
//
#define ERROR_PROCESS_MODE_ALREADY_BACKGROUND 402L
//
// MessageId: ERROR_PROCESS_MODE_NOT_BACKGROUND
//
// MessageText:
//
// The process is not in background processing mode.
//
#define ERROR_PROCESS_MODE_NOT_BACKGROUND 403L
//
// MessageId: ERROR_INVALID_ADDRESS
//
// MessageText:
//
// Attempt to access invalid address.
//
#define
ERROR_INVALID_ADDRESS
487L
//
// MessageId: ERROR_USER_PROFILE_LOAD
//
// MessageText:
//
// User profile cannot be loaded.
//
#define
ERROR_USER_PROFILE_LOAD
500L
//
// MessageId: ERROR_ARITHMETIC_OVERFLOW
//
// MessageText:
//
// Arithmetic result exceeded 32 bits.
//
#define
ERROR_ARITHMETIC_OVERFLOW
534L
//
// MessageId: ERROR_PIPE_CONNECTED
//
// MessageText:
//
// There is a process on other end of the pipe.
//
#define
ERROR_PIPE_CONNECTED
535L
//
// MessageId: ERROR_PIPE_LISTENING
//
// MessageText:
//
// Waiting for a process to open the other end of the pipe.
//
#define
ERROR_PIPE_LISTENING
536L
//
// MessageId: ERROR_VERIFIER_STOP
//
// MessageText:
//
// Application verifier has found an error in the current process.
//
#define
ERROR_VERIFIER_STOP
537L
//
// MessageId: ERROR_ABIOS_ERROR
//
// MessageText:
//
// An error occurred in the ABIOS subsystem.
//
#define
ERROR_ABIOS_ERROR
538L
//
// MessageId: ERROR_WX86_WARNING
//
// MessageText:
//
// A warning occurred in the WX86 subsystem.
//
#define
ERROR_WX86_WARNING
539L
//
// MessageId: ERROR_WX86_ERROR
//
// MessageText:
//
// An error occurred in the WX86 subsystem.
//
#define
ERROR_WX86_ERROR
540L
//
// MessageId: ERROR_TIMER_NOT_CANCELED
//
// MessageText:
//
//
An attempt was made to cancel or set a timer that has an associated APC
and the subject thread is not the thread that originally set the timer
with an associated APC routine.
//
#define
ERROR_TIMER_NOT_CANCELED
541L
//
// MessageId: ERROR_UNWIND
//
// MessageText:
//
// Unwind exception code.
//
#define
ERROR_UNWIND
542L
//
// MessageId: ERROR_BAD_STACK
//
// MessageText:
//
// An invalid or unaligned stack was encountered during an unwind
operation.
//
#define
ERROR_BAD_STACK
543L
//
// MessageId: ERROR_INVALID_UNWIND_TARGET
//
// MessageText:
//
// An invalid unwind target was encountered during an unwind operation.
//
#define
ERROR_INVALID_UNWIND_TARGET
544L
//
// MessageId: ERROR_INVALID_PORT_ATTRIBUTES
//
// MessageText:
//
// Invalid Object Attributes specified to NtCreatePort or invalid Port
Attributes specified to NtConnectPort
//
#define ERROR_INVALID_PORT_ATTRIBUTES 545L
//
// MessageId: ERROR_PORT_MESSAGE_TOO_LONG
//
// MessageText:
//
// Length of message passed to NtRequestPort or NtRequestWaitReplyPort
was longer than the maximum message allowed by the port.
//
#define
ERROR_PORT_MESSAGE_TOO_LONG
546L
//
// MessageId: ERROR_INVALID_QUOTA_LOWER
//
// MessageText:
//
// An attempt was made to lower a quota limit below the current usage.
//
#define
ERROR_INVALID_QUOTA_LOWER
547L
//
// MessageId: ERROR_DEVICE_ALREADY_ATTACHED
//
// MessageText:
//
// An attempt was made to attach to a device that was already attached
to another device.
//
#define ERROR_DEVICE_ALREADY_ATTACHED 548L
//
// MessageId: ERROR_INSTRUCTION_MISALIGNMENT
//
// MessageText:
//
//
An attempt was made to execute an instruction at an unaligned address
and the host system does not support unaligned instruction references.
//
#define ERROR_INSTRUCTION_MISALIGNMENT 549L
//
// MessageId: ERROR_PROFILING_NOT_STARTED
//
// MessageText:
//
// Profiling not started.
//
#define
ERROR_PROFILING_NOT_STARTED
550L
//
// MessageId: ERROR_PROFILING_NOT_STOPPED
//
// MessageText:
//
// Profiling not stopped.
//
#define
ERROR_PROFILING_NOT_STOPPED
551L
//
// MessageId: ERROR_COULD_NOT_INTERPRET
//
// MessageText:
//
// The passed ACL did not contain the minimum required information.
//
#define
ERROR_COULD_NOT_INTERPRET
552L
//
// MessageId: ERROR_PROFILING_AT_LIMIT
//
// MessageText:
//
// The number of active profiling objects is at the maximum and no more
may be started.
//
#define
ERROR_PROFILING_AT_LIMIT
553L
//
// MessageId: ERROR_CANT_WAIT
//
// MessageText:
//
// Used to indicate that an operation cannot continue without blocking
for I/O.
//
#define
ERROR_CANT_WAIT
554L
//
// MessageId: ERROR_CANT_TERMINATE_SELF
//
// MessageText:
//
//
Indicates that a thread attempted to terminate itself by default
(called NtTerminateThread with NULL) and it was the last thread in the
current process.
//
#define
ERROR_CANT_TERMINATE_SELF
555L
//
// MessageId: ERROR_UNEXPECTED_MM_CREATE_ERR
//
// MessageText:
//
//
If an MM error is returned which is not defined in the standard FsRtl
filter, it is converted to one of the following errors which is
guaranteed to be in the filter.
// In this case information is lost, however, the filter correctly
handles the exception.
//
#define ERROR_UNEXPECTED_MM_CREATE_ERR 556L
//
// MessageId: ERROR_UNEXPECTED_MM_MAP_ERROR
//
// MessageText:
//
//
If an MM error is returned which is not defined in the standard FsRtl
filter, it is converted to one of the following errors which is
guaranteed to be in the filter.
// In this case information is lost, however, the filter correctly
handles the exception.
//
#define ERROR_UNEXPECTED_MM_MAP_ERROR 557L
//
// MessageId: ERROR_UNEXPECTED_MM_EXTEND_ERR
//
// MessageText:
//
//
If an MM error is returned which is not defined in the standard FsRtl
filter, it is converted to one of the following errors which is
guaranteed to be in the filter.
// In this case information is lost, however, the filter correctly
handles the exception.
//
#define ERROR_UNEXPECTED_MM_EXTEND_ERR 558L
//
// MessageId: ERROR_BAD_FUNCTION_TABLE
//
// MessageText:
//
// A malformed function table was encountered during an unwind
operation.
//
#define
ERROR_BAD_FUNCTION_TABLE
559L
//
// MessageId: ERROR_NO_GUID_TRANSLATION
//
// MessageText:
//
//
Indicates that an attempt was made to assign protection to a file
system file or directory and one of the SIDs in the security descriptor
could not be translated into a GUID that could be stored by the file
system.
// This causes the protection attempt to fail, which may cause a file
creation attempt to fail.
//
#define
ERROR_NO_GUID_TRANSLATION
560L
//
// MessageId: ERROR_INVALID_LDT_SIZE
//
// MessageText:
//
// Indicates that an attempt was made to grow an LDT by setting its
size, or that the size was not an even number of selectors.
//
#define
ERROR_INVALID_LDT_SIZE
561L
//
// MessageId: ERROR_INVALID_LDT_OFFSET
//
// MessageText:
//
// Indicates that the starting value for the LDT information was not an
integral multiple of the selector size.
//
#define
ERROR_INVALID_LDT_OFFSET
563L
//
// MessageId: ERROR_INVALID_LDT_DESCRIPTOR
//
// MessageText:
//
// Indicates that the user supplied an invalid descriptor when trying
to set up Ldt descriptors.
//
#define
ERROR_INVALID_LDT_DESCRIPTOR
564L
//
// MessageId: ERROR_TOO_MANY_THREADS
//
// MessageText:
//
//
Indicates a process has too many threads to perform the requested
action. For example, assignment of a primary token may only be
performed when a process has zero or one threads.
//
#define
ERROR_TOO_MANY_THREADS
565L
//
// MessageId: ERROR_THREAD_NOT_IN_PROCESS
//
// MessageText:
//
//
An attempt was made to operate on a thread within a specific process,
but the thread specified is not in the process specified.
//
#define
ERROR_THREAD_NOT_IN_PROCESS
566L
//
// MessageId: ERROR_PAGEFILE_QUOTA_EXCEEDED
//
// MessageText:
//
// Page file quota was exceeded.
//
#define ERROR_PAGEFILE_QUOTA_EXCEEDED 567L
//
// MessageId: ERROR_LOGON_SERVER_CONFLICT
//
// MessageText:
//
// The Netlogon service cannot start because another Netlogon service
running in the domain conflicts with the specified role.
//
#define
ERROR_LOGON_SERVER_CONFLICT
568L
//
// MessageId: ERROR_SYNCHRONIZATION_REQUIRED
//
// MessageText:
//
//
The SAM database on a Windows Server is significantly out of
synchronization with the copy on the Domain Controller. A complete
synchronization is required.
//
#define ERROR_SYNCHRONIZATION_REQUIRED 569L
//
// MessageId: ERROR_NET_OPEN_FAILED
//
// MessageText:
//
//
The NtCreateFile API failed. This error should never be returned to an
application, it is a place holder for the Windows Lan Manager
Redirector to use in its internal error mapping routines.
//
#define
ERROR_NET_OPEN_FAILED
570L
//
// MessageId: ERROR_IO_PRIVILEGE_FAILED
//
// MessageText:
//
// {Privilege Failed}
// The I/O permissions for the process could not be changed.
//
#define
ERROR_IO_PRIVILEGE_FAILED
571L
//
// MessageId: ERROR_CONTROL_C_EXIT
//
// MessageText:
//
// {Application Exit by CTRL+C}
// The application terminated as a result of a CTRL+C.
//
#define
ERROR_CONTROL_C_EXIT
572L // winnt
//
// MessageId: ERROR_MISSING_SYSTEMFILE
//
// MessageText:
//
// {Missing System File}
// The required system file %hs is bad or missing.
//
#define
ERROR_MISSING_SYSTEMFILE
573L
//
// MessageId: ERROR_UNHANDLED_EXCEPTION
//
// MessageText:
//
// {Application Error}
// The exception %s (0x%08lx) occurred in the application at location
0x%08lx.
//
#define
ERROR_UNHANDLED_EXCEPTION
574L
//
// MessageId: ERROR_APP_INIT_FAILURE
//
// MessageText:
//
// {Application Error}
// The application was unable to start correctly (0x%lx). Click OK to
close the application.
//
#define
ERROR_APP_INIT_FAILURE
575L
//
// MessageId: ERROR_PAGEFILE_CREATE_FAILED
//
// MessageText:
//
// {Unable to Create Paging File}
// The creation of the paging file %hs failed (%lx). The requested size
was %ld.
//
#define
ERROR_PAGEFILE_CREATE_FAILED
576L
//
// MessageId: ERROR_INVALID_IMAGE_HASH
//
// MessageText:
//
//
Windows cannot verify the digital signature for this file. A recent
hardware or software change might have installed a file that is signed
incorrectly or damaged, or that might be malicious software from an
unknown source.
//
#define
ERROR_INVALID_IMAGE_HASH
577L
//
// MessageId: ERROR_NO_PAGEFILE
//
// MessageText:
//
// {No Paging File Specified}
// No paging file was specified in the system configuration.
//
#define
ERROR_NO_PAGEFILE
578L
//
// MessageId: ERROR_ILLEGAL_FLOAT_CONTEXT
//
// MessageText:
//
// {EXCEPTION}
// A real-mode application issued a floating-point instruction and
floating-point hardware is not present.
//
#define
ERROR_ILLEGAL_FLOAT_CONTEXT
579L
//
// MessageId: ERROR_NO_EVENT_PAIR
//
// MessageText:
//
//
An event pair synchronization operation was performed using the thread
specific client/server event pair object, but no event pair object was
associated with the thread.
//
#define
ERROR_NO_EVENT_PAIR
580L
//
// MessageId: ERROR_DOMAIN_CTRLR_CONFIG_ERROR
//
// MessageText:
//
// A Windows Server has an incorrect configuration.
//
#define ERROR_DOMAIN_CTRLR_CONFIG_ERROR 581L
//
// MessageId: ERROR_ILLEGAL_CHARACTER
//
// MessageText:
//
//
An illegal character was encountered. For a multi-byte character set
this includes a lead byte without a succeeding trail byte. For the
Unicode character set this includes the characters 0xFFFF and 0xFFFE.
//
#define
ERROR_ILLEGAL_CHARACTER
582L
//
// MessageId: ERROR_UNDEFINED_CHARACTER
//
// MessageText:
//
// The Unicode character is not defined in the Unicode character set
installed on the system.
//
#define
ERROR_UNDEFINED_CHARACTER
583L
//
// MessageId: ERROR_FLOPPY_VOLUME
//
// MessageText:
//
// The paging file cannot be created on a floppy diskette.
//
#define
ERROR_FLOPPY_VOLUME
584L
//
// MessageId: ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT
//
// MessageText:
//
// The system BIOS failed to connect a system interrupt to the device
or bus for which the device is connected.
//
#define ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT 585L
//
// MessageId: ERROR_BACKUP_CONTROLLER
//
// MessageText:
//
// This operation is only allowed for the Primary Domain Controller of
the domain.
//
#define
ERROR_BACKUP_CONTROLLER
586L
//
// MessageId: ERROR_MUTANT_LIMIT_EXCEEDED
//
// MessageText:
//
// An attempt was made to acquire a mutant such that its maximum count
would have been exceeded.
//
#define
ERROR_MUTANT_LIMIT_EXCEEDED
587L
//
// MessageId: ERROR_FS_DRIVER_REQUIRED
//
// MessageText:
//
// A volume has been accessed for which a file system driver is
required that has not yet been loaded.
//
#define
ERROR_FS_DRIVER_REQUIRED
588L
//
// MessageId: ERROR_CANNOT_LOAD_REGISTRY_FILE
//
// MessageText:
//
// {Registry File Failure}
// The registry cannot load the hive (file):
// %hs
// or its log or alternate.
// It is corrupt, absent, or not writable.
//
#define ERROR_CANNOT_LOAD_REGISTRY_FILE 589L
//
// MessageId: ERROR_DEBUG_ATTACH_FAILED
//
// MessageText:
//
// {Unexpected Failure in DebugActiveProcess}
//
An unexpected failure occurred while processing a DebugActiveProcess
API request. You may choose OK to terminate the process, or Cancel to
ignore the error.
//
#define
ERROR_DEBUG_ATTACH_FAILED
590L
//
// MessageId: ERROR_SYSTEM_PROCESS_TERMINATED
//
// MessageText:
//
// {Fatal System Error}
// The %hs system process terminated unexpectedly with a status of
0x%08x (0x%08x 0x%08x).
// The system has been shut down.
//
#define ERROR_SYSTEM_PROCESS_TERMINATED 591L
//
// MessageId: ERROR_DATA_NOT_ACCEPTED
//
// MessageText:
//
// {Data Not Accepted}
// The TDI client could not handle the data received during an
indication.
//
#define
ERROR_DATA_NOT_ACCEPTED
592L
//
// MessageId: ERROR_VDM_HARD_ERROR
//
// MessageText:
//
// NTVDM encountered a hard error.
//
#define
ERROR_VDM_HARD_ERROR
593L
//
// MessageId: ERROR_DRIVER_CANCEL_TIMEOUT
//
// MessageText:
//
// {Cancel Timeout}
// The driver %hs failed to complete a cancelled I/O request in the
allotted time.
//
#define
ERROR_DRIVER_CANCEL_TIMEOUT
594L
//
// MessageId: ERROR_REPLY_MESSAGE_MISMATCH
//
// MessageText:
//
// {Reply Message Mismatch}
//
An attempt was made to reply to an LPC message, but the thread
specified by the client ID in the message was not waiting on that
message.
//
#define
ERROR_REPLY_MESSAGE_MISMATCH
595L
//
// MessageId: ERROR_LOST_WRITEBEHIND_DATA
//
// MessageText:
//
// {Delayed Write Failed}
// Windows was unable to save all the data for the file %hs. The data
has been lost.
//
This error may be caused by a failure of your computer hardware or
network connection. Please try to save this file elsewhere.
//
#define
ERROR_LOST_WRITEBEHIND_DATA
596L
//
// MessageId: ERROR_CLIENT_SERVER_PARAMETERS_INVALID
//
// MessageText:
//
//
The parameter(s) passed to the server in the client/server shared
memory window were invalid. Too much data may have been put in the
shared memory window.
//
#define ERROR_CLIENT_SERVER_PARAMETERS_INVALID 597L
//
// MessageId: ERROR_NOT_TINY_STREAM
//
// MessageText:
//
// The stream is not a tiny stream.
//
#define
ERROR_NOT_TINY_STREAM
598L
//
// MessageId: ERROR_STACK_OVERFLOW_READ
//
// MessageText:
//
// The request must be handled by the stack overflow code.
//
#define
ERROR_STACK_OVERFLOW_READ
599L
//
// MessageId: ERROR_CONVERT_TO_LARGE
//
// MessageText:
//
//
Internal OFS status codes indicating how an allocation operation is
handled. Either it is retried after the containing onode is moved or
the extent stream is converted to a large stream.
//
#define
ERROR_CONVERT_TO_LARGE
600L
//
// MessageId: ERROR_FOUND_OUT_OF_SCOPE
//
// MessageText:
//
//
The attempt to find the object found an object matching by ID on the
volume but it is out of the scope of the handle used for the operation.
//
#define
ERROR_FOUND_OUT_OF_SCOPE
601L
//
// MessageId: ERROR_ALLOCATE_BUCKET
//
// MessageText:
//
// The bucket array must be grown. Retry transaction after doing so.
//
#define
ERROR_ALLOCATE_BUCKET
602L
//
// MessageId: ERROR_MARSHALL_OVERFLOW
//
// MessageText:
//
// The user/kernel marshalling buffer has overflowed.
//
#define
ERROR_MARSHALL_OVERFLOW
603L
//
// MessageId: ERROR_INVALID_VARIANT
//
// MessageText:
//
// The supplied variant structure contains invalid data.
//
#define
ERROR_INVALID_VARIANT
604L
//
// MessageId: ERROR_BAD_COMPRESSION_BUFFER
//
// MessageText:
//
// The specified buffer contains ill-formed data.
//
#define
ERROR_BAD_COMPRESSION_BUFFER
605L
//
// MessageId: ERROR_AUDIT_FAILED
//
// MessageText:
//
// {Audit Failed}
// An attempt to generate a security audit failed.
//
#define
ERROR_AUDIT_FAILED
606L
//
// MessageId: ERROR_TIMER_RESOLUTION_NOT_SET
//
// MessageText:
//
// The timer resolution was not previously set by the current process.
//
#define ERROR_TIMER_RESOLUTION_NOT_SET 607L
//
// MessageId: ERROR_INSUFFICIENT_LOGON_INFO
//
// MessageText:
//
// There is insufficient account information to log you on.
//
#define ERROR_INSUFFICIENT_LOGON_INFO 608L
//
// MessageId: ERROR_BAD_DLL_ENTRYPOINT
//
// MessageText:
//
// {Invalid DLL Entrypoint}
// The dynamic link library %hs is not written correctly. The stack
pointer has been left in an inconsistent state.
//
The entrypoint should be declared as WINAPI or STDCALL. Select YES to
fail the DLL load. Select NO to continue execution. Selecting NO may
cause the application to operate incorrectly.
//
#define
ERROR_BAD_DLL_ENTRYPOINT
609L
//
// MessageId: ERROR_BAD_SERVICE_ENTRYPOINT
//
// MessageText:
//
// {Invalid Service Callback Entrypoint}
// The %hs service is not written correctly. The stack pointer has been
left in an inconsistent state.
//
The callback entrypoint should be declared as WINAPI or STDCALL.
Selecting OK will cause the service to continue operation. However, the
service process may operate incorrectly.
//
#define
ERROR_BAD_SERVICE_ENTRYPOINT
610L
//
// MessageId: ERROR_IP_ADDRESS_CONFLICT1
//
// MessageText:
//
// There is an IP address conflict with another system on the network
//
#define
ERROR_IP_ADDRESS_CONFLICT1
611L
//
// MessageId: ERROR_IP_ADDRESS_CONFLICT2
//
// MessageText:
//
// There is an IP address conflict with another system on the network
//
#define
ERROR_IP_ADDRESS_CONFLICT2
612L
//
// MessageId: ERROR_REGISTRY_QUOTA_LIMIT
//
// MessageText:
//
// {Low On Registry Space}
//
The system has reached the maximum size allowed for the system part of
the registry. Additional storage requests will be ignored.
//
#define
ERROR_REGISTRY_QUOTA_LIMIT
613L
//
// MessageId: ERROR_NO_CALLBACK_ACTIVE
//
// MessageText:
//
// A callback return system service cannot be executed when no callback
is active.
//
#define
ERROR_NO_CALLBACK_ACTIVE
614L
//
// MessageId: ERROR_PWD_TOO_SHORT
//
// MessageText:
//
// The password provided is too short to meet the policy of your user
account.
// Please choose a longer password.
//
#define
ERROR_PWD_TOO_SHORT
615L
//
// MessageId: ERROR_PWD_TOO_RECENT
//
// MessageText:
//
// The policy of your user account does not allow you to change
passwords too frequently.
// This is done to prevent users from changing back to a familiar, but
potentially discovered, password.
// If you feel your password has been compromised then please contact
your administrator immediately to have a new one assigned.
//
#define
ERROR_PWD_TOO_RECENT
616L
//
// MessageId: ERROR_PWD_HISTORY_CONFLICT
//
// MessageText:
//
// You have attempted to change your password to one that you have used
in the past.
// The policy of your user account does not allow this. Please select a
password that you have not previously used.
//
#define
ERROR_PWD_HISTORY_CONFLICT
617L
//
// MessageId: ERROR_UNSUPPORTED_COMPRESSION
//
// MessageText:
//
// The specified compression format is unsupported.
//
#define ERROR_UNSUPPORTED_COMPRESSION 618L
//
// MessageId: ERROR_INVALID_HW_PROFILE
//
// MessageText:
//
// The specified hardware profile configuration is invalid.
//
#define
ERROR_INVALID_HW_PROFILE
619L
//
// MessageId: ERROR_INVALID_PLUGPLAY_DEVICE_PATH
//
// MessageText:
//
// The specified Plug and Play registry device path is invalid.
//
#define ERROR_INVALID_PLUGPLAY_DEVICE_PATH 620L
//
// MessageId: ERROR_QUOTA_LIST_INCONSISTENT
//
// MessageText:
//
// The specified quota list is internally inconsistent with its
descriptor.
//
#define ERROR_QUOTA_LIST_INCONSISTENT 621L
//
// MessageId: ERROR_EVALUATION_EXPIRATION
//
// MessageText:
//
// {Windows Evaluation Notification}
//
The evaluation period for this installation of Windows has expired.
This system will shutdown in 1 hour. To restore access to this
installation of Windows, please upgrade this installation using a
licensed distribution of this product.
//
#define
ERROR_EVALUATION_EXPIRATION
622L
//
// MessageId: ERROR_ILLEGAL_DLL_RELOCATION
//
// MessageText:
//
// {Illegal System DLL Relocation}
// The system DLL %hs was relocated in memory. The application will not
run properly.
//
The relocation occurred because the DLL %hs occupied an address range
reserved for Windows system DLLs. The vendor supplying the DLL should
be contacted for a new DLL.
//
#define
ERROR_ILLEGAL_DLL_RELOCATION
623L
//
// MessageId: ERROR_DLL_INIT_FAILED_LOGOFF
//
// MessageText:
//
// {DLL Initialization Failed}
// The application failed to initialize because the window station is
shutting down.
//
#define
ERROR_DLL_INIT_FAILED_LOGOFF
624L
//
// MessageId: ERROR_VALIDATE_CONTINUE
//
// MessageText:
//
// The validation process needs to continue on to the next step.
//
#define
ERROR_VALIDATE_CONTINUE
625L
//
// MessageId: ERROR_NO_MORE_MATCHES
//
// MessageText:
//
// There are no more matches for the current index enumeration.
//
#define
ERROR_NO_MORE_MATCHES
626L
//
// MessageId: ERROR_RANGE_LIST_CONFLICT
//
// MessageText:
//
// The range could not be added to the range list because of a conflict.
//
#define
ERROR_RANGE_LIST_CONFLICT
627L
//
// MessageId: ERROR_SERVER_SID_MISMATCH
//
// MessageText:
//
// The server process is running under a SID different than that
required by client.
//
#define
ERROR_SERVER_SID_MISMATCH
628L
//
// MessageId: ERROR_CANT_ENABLE_DENY_ONLY
//
// MessageText:
//
// A group marked use for deny only cannot be enabled.
//
#define
ERROR_CANT_ENABLE_DENY_ONLY
629L
//
// MessageId: ERROR_FLOAT_MULTIPLE_FAULTS
//
// MessageText:
//
// {EXCEPTION}
// Multiple floating point faults.
//
#define
ERROR_FLOAT_MULTIPLE_FAULTS
630L // winnt
//
// MessageId: ERROR_FLOAT_MULTIPLE_TRAPS
//
// MessageText:
//
// {EXCEPTION}
// Multiple floating point traps.
//
#define
ERROR_FLOAT_MULTIPLE_TRAPS
631L // winnt
//
// MessageId: ERROR_NOINTERFACE
//
// MessageText:
//
// The requested interface is not supported.
//
#define
ERROR_NOINTERFACE
632L
//
// MessageId: ERROR_DRIVER_FAILED_SLEEP
//
// MessageText:
//
// {System Standby Failed}
// The driver %hs does not support standby mode. Updating this driver
may allow the system to go to standby mode.
//
#define
ERROR_DRIVER_FAILED_SLEEP
633L
//
// MessageId: ERROR_CORRUPT_SYSTEM_FILE
//
// MessageText:
//
// The system file %1 has become corrupt and has been replaced.
//
#define
ERROR_CORRUPT_SYSTEM_FILE
634L
//
// MessageId: ERROR_COMMITMENT_MINIMUM
//
// MessageText:
//
// {Virtual Memory Minimum Too Low}
// Your system is low on virtual memory. Windows is increasing the size
of your virtual memory paging file.
// During this process, memory requests for some applications may be
denied. For more information, see Help.
//
#define
ERROR_COMMITMENT_MINIMUM
635L
//
// MessageId: ERROR_PNP_RESTART_ENUMERATION
//
// MessageText:
//
// A device was removed so enumeration must be restarted.
//
#define ERROR_PNP_RESTART_ENUMERATION 636L
//
// MessageId: ERROR_SYSTEM_IMAGE_BAD_SIGNATURE
//
// MessageText:
//
// {Fatal System Error}
// The system image %s is not properly signed.
// The file has been replaced with the signed file.
// The system has been shut down.
//
#define ERROR_SYSTEM_IMAGE_BAD_SIGNATURE 637L
//
// MessageId: ERROR_PNP_REBOOT_REQUIRED
//
// MessageText:
//
// Device will not start without a reboot.
//
#define
ERROR_PNP_REBOOT_REQUIRED
638L
//
// MessageId: ERROR_INSUFFICIENT_POWER
//
// MessageText:
//
// There is not enough power to complete the requested operation.
//
#define
ERROR_INSUFFICIENT_POWER
639L
//
// MessageId: ERROR_MULTIPLE_FAULT_VIOLATION
//
// MessageText:
//
// ERROR_MULTIPLE_FAULT_VIOLATION
//
#define ERROR_MULTIPLE_FAULT_VIOLATION 640L
//
// MessageId: ERROR_SYSTEM_SHUTDOWN
//
// MessageText:
//
// The system is in the process of shutting down.
//
#define
ERROR_SYSTEM_SHUTDOWN
641L
//
// MessageId: ERROR_PORT_NOT_SET
//
// MessageText:
//
// An attempt to remove a processes DebugPort was made, but a port was
not already associated with the process.
//
#define
ERROR_PORT_NOT_SET
642L
//
// MessageId: ERROR_DS_VERSION_CHECK_FAILURE
//
// MessageText:
//
// This version of Windows is not compatible with the behavior version
of directory forest, domain or domain controller.
//
#define ERROR_DS_VERSION_CHECK_FAILURE 643L
//
// MessageId: ERROR_RANGE_NOT_FOUND
//
// MessageText:
//
// The specified range could not be found in the range list.
//
#define
ERROR_RANGE_NOT_FOUND
644L
//
// MessageId: ERROR_NOT_SAFE_MODE_DRIVER
//
// MessageText:
//
// The driver was not loaded because the system is booting into safe
mode.
//
#define
ERROR_NOT_SAFE_MODE_DRIVER
646L
//
// MessageId: ERROR_FAILED_DRIVER_ENTRY
//
// MessageText:
//
// The driver was not loaded because it failed it's initialization call.
//
#define
ERROR_FAILED_DRIVER_ENTRY
647L
//
// MessageId: ERROR_DEVICE_ENUMERATION_ERROR
//
// MessageText:
//
// The "%hs" encountered an error while applying power or reading the
device configuration.
// This may be caused by a failure of your hardware or by a poor
connection.
//
#define ERROR_DEVICE_ENUMERATION_ERROR 648L
//
// MessageId: ERROR_MOUNT_POINT_NOT_RESOLVED
//
// MessageText:
//
//
The create operation failed because the name contained at least one
mount point which resolves to a volume to which the specified device
object is not attached.
//
#define ERROR_MOUNT_POINT_NOT_RESOLVED 649L
//
// MessageId: ERROR_INVALID_DEVICE_OBJECT_PARAMETER
//
// MessageText:
//
// The device object parameter is either not a valid device object or
is not attached to the volume specified by the file name.
//
#define ERROR_INVALID_DEVICE_OBJECT_PARAMETER 650L
//
// MessageId: ERROR_MCA_OCCURED
//
// MessageText:
//
// A Machine Check Error has occurred. Please check the system eventlog
for additional information.
//
#define
ERROR_MCA_OCCURED
651L
//
// MessageId: ERROR_DRIVER_DATABASE_ERROR
//
// MessageText:
//
// There was error [%2] processing the driver database.
//
#define
ERROR_DRIVER_DATABASE_ERROR
652L
//
// MessageId: ERROR_SYSTEM_HIVE_TOO_LARGE
//
// MessageText:
//
// System hive size has exceeded its limit.
//
#define
ERROR_SYSTEM_HIVE_TOO_LARGE
653L
//
// MessageId: ERROR_DRIVER_FAILED_PRIOR_UNLOAD
//
// MessageText:
//
// The driver could not be loaded because a previous version of the
driver is still in memory.
//
#define ERROR_DRIVER_FAILED_PRIOR_UNLOAD 654L
//
// MessageId: ERROR_VOLSNAP_PREPARE_HIBERNATE
//
// MessageText:
//
// {Volume Shadow Copy Service}
// Please wait while the Volume Shadow Copy Service prepares volume %hs
for hibernation.
//
#define ERROR_VOLSNAP_PREPARE_HIBERNATE 655L
//
// MessageId: ERROR_HIBERNATION_FAILURE
//
// MessageText:
//
// The system has failed to hibernate (The error code is %hs).
Hibernation will be disabled until the system is restarted.
//
#define
ERROR_HIBERNATION_FAILURE
656L
//
// MessageId: ERROR_FILE_SYSTEM_LIMITATION
//
// MessageText:
//
// The requested operation could not be completed due to a file system
limitation
//
#define
ERROR_FILE_SYSTEM_LIMITATION
665L
//
// MessageId: ERROR_ASSERTION_FAILURE
//
// MessageText:
//
// An assertion failure has occurred.
//
#define
ERROR_ASSERTION_FAILURE
668L
//
// MessageId: ERROR_ACPI_ERROR
//
// MessageText:
//
// An error occurred in the ACPI subsystem.
//
#define
ERROR_ACPI_ERROR
669L
//
// MessageId: ERROR_WOW_ASSERTION
//
// MessageText:
//
// WOW Assertion Error.
//
#define
ERROR_WOW_ASSERTION
670L
//
// MessageId: ERROR_PNP_BAD_MPS_TABLE
//
// MessageText:
//
// A device is missing in the system BIOS MPS table. This device will
not be used.
// Please contact your system vendor for system BIOS update.
//
#define
ERROR_PNP_BAD_MPS_TABLE
671L
//
// MessageId: ERROR_PNP_TRANSLATION_FAILED
//
// MessageText:
//
// A translator failed to translate resources.
//
#define
ERROR_PNP_TRANSLATION_FAILED
672L
//
// MessageId: ERROR_PNP_IRQ_TRANSLATION_FAILED
//
// MessageText:
//
// A IRQ translator failed to translate resources.
//
#define ERROR_PNP_IRQ_TRANSLATION_FAILED 673L
//
// MessageId: ERROR_PNP_INVALID_ID
//
// MessageText:
//
// Driver %2 returned invalid ID for a child device (%3).
//
#define
ERROR_PNP_INVALID_ID
674L
//
// MessageId: ERROR_WAKE_SYSTEM_DEBUGGER
//
// MessageText:
//
// {Kernel Debugger Awakened}
// the system debugger was awakened by an interrupt.
//
#define
ERROR_WAKE_SYSTEM_DEBUGGER
675L
//
// MessageId: ERROR_HANDLES_CLOSED
//
// MessageText:
//
// {Handles Closed}
// Handles to objects have been automatically closed as a result of the
requested operation.
//
#define
ERROR_HANDLES_CLOSED
676L
//
// MessageId: ERROR_EXTRANEOUS_INFORMATION
//
// MessageText:
//
// {Too Much Information}
// The specified access control list (ACL) contained more information
than was expected.
//
#define
ERROR_EXTRANEOUS_INFORMATION
677L
//
// MessageId: ERROR_RXACT_COMMIT_NECESSARY
//
// MessageText:
//
//
This warning level status indicates that the transaction state already
exists for the registry sub-tree, but that a transaction commit was
previously aborted.
// The commit has NOT been completed, but has not been rolled back
either (so it may still be committed if desired).
//
#define
ERROR_RXACT_COMMIT_NECESSARY
678L
//
// MessageId: ERROR_MEDIA_CHECK
//
// MessageText:
//
// {Media Changed}
// The media may have changed.
//
#define
ERROR_MEDIA_CHECK
679L
//
// MessageId: ERROR_GUID_SUBSTITUTION_MADE
//
// MessageText:
//
// {GUID Substitution}
//
During the translation of a global identifier (GUID) to a Windows
security ID (SID), no administratively-defined GUID prefix was found.
//
A substitute prefix was used, which will not compromise system
security. However, this may provide a more restrictive access than
intended.
//
#define
ERROR_GUID_SUBSTITUTION_MADE
680L
//
// MessageId: ERROR_STOPPED_ON_SYMLINK
//
// MessageText:
//
// The create operation stopped after reaching a symbolic link
//
#define
ERROR_STOPPED_ON_SYMLINK
681L
//
// MessageId: ERROR_LONGJUMP
//
// MessageText:
//
// A long jump has been executed.
//
#define
ERROR_LONGJUMP
682L
//
// MessageId: ERROR_PLUGPLAY_QUERY_VETOED
//
// MessageText:
//
// The Plug and Play query operation was not successful.
//
#define
ERROR_PLUGPLAY_QUERY_VETOED
683L
//
// MessageId: ERROR_UNWIND_CONSOLIDATE
//
// MessageText:
//
// A frame consolidation has been executed.
//
#define
ERROR_UNWIND_CONSOLIDATE
684L
//
// MessageId: ERROR_REGISTRY_HIVE_RECOVERED
//
// MessageText:
//
// {Registry Hive Recovered}
// Registry hive (file):
// %hs
// was corrupted and it has been recovered. Some data might have been
lost.
//
#define ERROR_REGISTRY_HIVE_RECOVERED 685L
//
// MessageId: ERROR_DLL_MIGHT_BE_INSECURE
//
// MessageText:
//
//
The application is attempting to run executable code from the module
%hs. This may be insecure. An alternative, %hs, is available. Should
the application use the secure module %hs?
//
#define
ERROR_DLL_MIGHT_BE_INSECURE
686L
//
// MessageId: ERROR_DLL_MIGHT_BE_INCOMPATIBLE
//
// MessageText:
//
//
The application is loading executable code from the module %hs. This is
secure, but may be incompatible with previous releases of the operating
system. An alternative, %hs, is available. Should the application use
the secure module %hs?
//
#define ERROR_DLL_MIGHT_BE_INCOMPATIBLE 687L
//
// MessageId: ERROR_DBG_EXCEPTION_NOT_HANDLED
//
// MessageText:
//
// Debugger did not handle the exception.
//
#define ERROR_DBG_EXCEPTION_NOT_HANDLED
688L // winnt
//
// MessageId: ERROR_DBG_REPLY_LATER
//
// MessageText:
//
// Debugger will reply later.
//
#define
ERROR_DBG_REPLY_LATER
689L
//
// MessageId: ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE
//
// MessageText:
//
// Debugger cannot provide handle.
//
#define ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE 690L
//
// MessageId: ERROR_DBG_TERMINATE_THREAD
//
// MessageText:
//
// Debugger terminated thread.
//
#define
ERROR_DBG_TERMINATE_THREAD
691L // winnt
//
// MessageId: ERROR_DBG_TERMINATE_PROCESS
//
// MessageText:
//
// Debugger terminated process.
//
#define
ERROR_DBG_TERMINATE_PROCESS
692L // winnt
//
// MessageId: ERROR_DBG_CONTROL_C
//
// MessageText:
//
// Debugger got control C.
//
#define
ERROR_DBG_CONTROL_C
693L // winnt
//
// MessageId: ERROR_DBG_PRINTEXCEPTION_C
//
// MessageText:
//
// Debugger printed exception on control C.
//
#define
ERROR_DBG_PRINTEXCEPTION_C
694L
//
// MessageId: ERROR_DBG_RIPEXCEPTION
//
// MessageText:
//
// Debugger received RIP exception.
//
#define
ERROR_DBG_RIPEXCEPTION
695L
//
// MessageId: ERROR_DBG_CONTROL_BREAK
//
// MessageText:
//
// Debugger received control break.
//
#define
ERROR_DBG_CONTROL_BREAK
696L // winnt
//
// MessageId: ERROR_DBG_COMMAND_EXCEPTION
//
// MessageText:
//
// Debugger command communication exception.
//
#define
ERROR_DBG_COMMAND_EXCEPTION
697L // winnt
//
// MessageId: ERROR_OBJECT_NAME_EXISTS
//
// MessageText:
//
// {Object Exists}
// An attempt was made to create an object and the object name already
existed.
//
#define
ERROR_OBJECT_NAME_EXISTS
698L
//
// MessageId: ERROR_THREAD_WAS_SUSPENDED
//
// MessageText:
//
// {Thread Suspended}
// A thread termination occurred while the thread was suspended. The
thread was resumed, and termination proceeded.
//
#define
ERROR_THREAD_WAS_SUSPENDED
699L
//
// MessageId: ERROR_IMAGE_NOT_AT_BASE
//
// MessageText:
//
// {Image Relocated}
// An image file could not be mapped at the address specified in the
image file. Local fixups must be performed on this image.
//
#define
ERROR_IMAGE_NOT_AT_BASE
700L
//
// MessageId: ERROR_RXACT_STATE_CREATED
//
// MessageText:
//
//
This informational level status indicates that a specified registry
sub-tree transaction state did not yet exist and had to be created.
//
#define
ERROR_RXACT_STATE_CREATED
701L
//
// MessageId: ERROR_SEGMENT_NOTIFICATION
//
// MessageText:
//
// {Segment Load}
// A virtual DOS machine (VDM) is loading, unloading, or moving an
MS-DOS or Win16 program segment image.
// An exception is raised so a debugger can load, unload or track
symbols and breakpoints within these 16-bit segments.
//
#define
ERROR_SEGMENT_NOTIFICATION
702L // winnt
//
// MessageId: ERROR_BAD_CURRENT_DIRECTORY
//
// MessageText:
//
// {Invalid Current Directory}
// The process cannot switch to the startup current directory %hs.
// Select OK to set current directory to %hs, or select CANCEL to exit.
//
#define
ERROR_BAD_CURRENT_DIRECTORY
703L
//
// MessageId: ERROR_FT_READ_RECOVERY_FROM_BACKUP
//
// MessageText:
//
// {Redundant Read}
// To satisfy a read request, the NT fault-tolerant file system
successfully read the requested data from a redundant copy.
//
This was done because the file system encountered a failure on a member
of the fault-tolerant volume, but was unable to reassign the failing
area of the device.
//
#define ERROR_FT_READ_RECOVERY_FROM_BACKUP 704L
//
// MessageId: ERROR_FT_WRITE_RECOVERY
//
// MessageText:
//
// {Redundant Write}
// To satisfy a write request, the NT fault-tolerant file system
successfully wrote a redundant copy of the information.
//
This was done because the file system encountered a failure on a member
of the fault-tolerant volume, but was not able to reassign the failing
area of the device.
//
#define
ERROR_FT_WRITE_RECOVERY
705L
//
// MessageId: ERROR_IMAGE_MACHINE_TYPE_MISMATCH
//
// MessageText:
//
// {Machine Type Mismatch}
//
The image file %hs is valid, but is for a machine type other than the
current machine. Select OK to continue, or CANCEL to fail the DLL load.
//
#define ERROR_IMAGE_MACHINE_TYPE_MISMATCH 706L
//
// MessageId: ERROR_RECEIVE_PARTIAL
//
// MessageText:
//
// {Partial Data Received}
// The network transport returned partial data to its client. The
remaining data will be sent later.
//
#define
ERROR_RECEIVE_PARTIAL
707L
//
// MessageId: ERROR_RECEIVE_EXPEDITED
//
// MessageText:
//
// {Expedited Data Received}
// The network transport returned data to its client that was marked as
expedited by the remote system.
//
#define
ERROR_RECEIVE_EXPEDITED
708L
//
// MessageId: ERROR_RECEIVE_PARTIAL_EXPEDITED
//
// MessageText:
//
// {Partial Expedited Data Received}
//
The network transport returned partial data to its client and this data
was marked as expedited by the remote system. The remaining data will
be sent later.
//
#define ERROR_RECEIVE_PARTIAL_EXPEDITED 709L
//
// MessageId: ERROR_EVENT_DONE
//
// MessageText:
//
// {TDI Event Done}
// The TDI indication has completed successfully.
//
#define
ERROR_EVENT_DONE
710L
//
// MessageId: ERROR_EVENT_PENDING
//
// MessageText:
//
// {TDI Event Pending}
// The TDI indication has entered the pending state.
//
#define
ERROR_EVENT_PENDING
711L
//
// MessageId: ERROR_CHECKING_FILE_SYSTEM
//
// MessageText:
//
// Checking file system on %wZ
//
#define
ERROR_CHECKING_FILE_SYSTEM
712L
//
// MessageId: ERROR_FATAL_APP_EXIT
//
// MessageText:
//
// {Fatal Application Exit}
// %hs
//
#define
ERROR_FATAL_APP_EXIT
713L
//
// MessageId: ERROR_PREDEFINED_HANDLE
//
// MessageText:
//
// The specified registry key is referenced by a predefined handle.
//
#define
ERROR_PREDEFINED_HANDLE
714L
//
// MessageId: ERROR_WAS_UNLOCKED
//
// MessageText:
//
// {Page Unlocked}
// The page protection of a locked page was changed to 'No Access' and
the page was unlocked from memory and from the process.
//
#define
ERROR_WAS_UNLOCKED
715L
//
// MessageId: ERROR_SERVICE_NOTIFICATION
//
// MessageText:
//
// %hs
//
#define
ERROR_SERVICE_NOTIFICATION
716L
//
// MessageId: ERROR_WAS_LOCKED
//
// MessageText:
//
// {Page Locked}
// One of the pages to lock was already locked.
//
#define
ERROR_WAS_LOCKED
717L
//
// MessageId: ERROR_LOG_HARD_ERROR
//
// MessageText:
//
// Application popup: %1 : %2
//
#define
ERROR_LOG_HARD_ERROR
718L
//
// MessageId: ERROR_ALREADY_WIN32
//
// MessageText:
//
// ERROR_ALREADY_WIN32
//
#define
ERROR_ALREADY_WIN32
719L
//
// MessageId: ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE
//
// MessageText:
//
// {Machine Type Mismatch}
// The image file %hs is valid, but is for a machine type other than
the current machine.
//
#define ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE 720L
//
// MessageId: ERROR_NO_YIELD_PERFORMED
//
// MessageText:
//
// A yield execution was performed and no thread was available to run.
//
#define
ERROR_NO_YIELD_PERFORMED
721L
//
// MessageId: ERROR_TIMER_RESUME_IGNORED
//
// MessageText:
//
// The resumable flag to a timer API was ignored.
//
#define
ERROR_TIMER_RESUME_IGNORED
722L
//
// MessageId: ERROR_ARBITRATION_UNHANDLED
//
// MessageText:
//
// The arbiter has deferred arbitration of these resources to its parent
//
#define
ERROR_ARBITRATION_UNHANDLED
723L
//
// MessageId: ERROR_CARDBUS_NOT_SUPPORTED
//
// MessageText:
//
// The inserted CardBus device cannot be started because of a
configuration error on "%hs".
//
#define
ERROR_CARDBUS_NOT_SUPPORTED
724L
//
// MessageId: ERROR_MP_PROCESSOR_MISMATCH
//
// MessageText:
//
//
The CPUs in this multiprocessor system are not all the same revision
level. To use all processors the operating system restricts itself to
the features of the least capable processor in the system. Should
problems occur with this system, contact the CPU manufacturer to see if
this mix of processors is supported.
//
#define
ERROR_MP_PROCESSOR_MISMATCH
725L
//
// MessageId: ERROR_HIBERNATED
//
// MessageText:
//
// The system was put into hibernation.
//
#define
ERROR_HIBERNATED
726L
//
// MessageId: ERROR_RESUME_HIBERNATION
//
// MessageText:
//
// The system was resumed from hibernation.
//
#define
ERROR_RESUME_HIBERNATION
727L
//
// MessageId: ERROR_FIRMWARE_UPDATED
//
// MessageText:
//
// Windows has detected that the system firmware (BIOS) was updated
[previous firmware date = %2, current firmware date %3].
//
#define
ERROR_FIRMWARE_UPDATED
728L
//
// MessageId: ERROR_DRIVERS_LEAKING_LOCKED_PAGES
//
// MessageText:
//
//
A device driver is leaking locked I/O pages causing system degradation.
The system has automatically enabled tracking code in order to try and
catch the culprit.
//
#define ERROR_DRIVERS_LEAKING_LOCKED_PAGES 729L
//
// MessageId: ERROR_WAKE_SYSTEM
//
// MessageText:
//
// The system has awoken
//
#define
ERROR_WAKE_SYSTEM
730L
//
// MessageId: ERROR_WAIT_1
//
// MessageText:
//
// ERROR_WAIT_1
//
#define
ERROR_WAIT_1
731L
//
// MessageId: ERROR_WAIT_2
//
// MessageText:
//
// ERROR_WAIT_2
//
#define
ERROR_WAIT_2
732L
//
// MessageId: ERROR_WAIT_3
//
// MessageText:
//
// ERROR_WAIT_3
//
#define
ERROR_WAIT_3
733L
//
// MessageId: ERROR_WAIT_63
//
// MessageText:
//
// ERROR_WAIT_63
//
#define
ERROR_WAIT_63
734L
//
// MessageId: ERROR_ABANDONED_WAIT_0
//
// MessageText:
//
// ERROR_ABANDONED_WAIT_0
//
#define
ERROR_ABANDONED_WAIT_0
735L // winnt
//
// MessageId: ERROR_ABANDONED_WAIT_63
//
// MessageText:
//
// ERROR_ABANDONED_WAIT_63
//
#define
ERROR_ABANDONED_WAIT_63
736L
//
// MessageId: ERROR_USER_APC
//
// MessageText:
//
// ERROR_USER_APC
//
#define
ERROR_USER_APC
737L // winnt
//
// MessageId: ERROR_KERNEL_APC
//
// MessageText:
//
// ERROR_KERNEL_APC
//
#define
ERROR_KERNEL_APC
738L
//
// MessageId: ERROR_ALERTED
//
// MessageText:
//
// ERROR_ALERTED
//
#define
ERROR_ALERTED
739L
//
// MessageId: ERROR_ELEVATION_REQUIRED
//
// MessageText:
//
// The requested operation requires elevation.
//
#define
ERROR_ELEVATION_REQUIRED
740L
//
// MessageId: ERROR_REPARSE
//
// MessageText:
//
// A reparse should be performed by the Object Manager since the name
of the file resulted in a symbolic link.
//
#define
ERROR_REPARSE
741L
//
// MessageId: ERROR_OPLOCK_BREAK_IN_PROGRESS
//
// MessageText:
//
// An open/create operation completed while an oplock break is underway.
//
#define ERROR_OPLOCK_BREAK_IN_PROGRESS 742L
//
// MessageId: ERROR_VOLUME_MOUNTED
//
// MessageText:
//
// A new volume has been mounted by a file system.
//
#define
ERROR_VOLUME_MOUNTED
743L
//
// MessageId: ERROR_RXACT_COMMITTED
//
// MessageText:
//
//
This success level status indicates that the transaction state already
exists for the registry sub-tree, but that a transaction commit was
previously aborted.
// The commit has now been completed.
//
#define
ERROR_RXACT_COMMITTED
744L
//
// MessageId: ERROR_NOTIFY_CLEANUP
//
// MessageText:
//
//
This indicates that a notify change request has been completed due to
closing the handle which made the notify change request.
//
#define
ERROR_NOTIFY_CLEANUP
745L
//
// MessageId: ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED
//
// MessageText:
//
// {Connect Failure on Primary Transport}
// An attempt was made to connect to the remote server %hs on the
primary transport, but the connection failed.
// The computer WAS able to connect on a secondary transport.
//
#define ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED 746L
//
// MessageId: ERROR_PAGE_FAULT_TRANSITION
//
// MessageText:
//
// Page fault was a transition fault.
//
#define
ERROR_PAGE_FAULT_TRANSITION
747L
//
// MessageId: ERROR_PAGE_FAULT_DEMAND_ZERO
//
// MessageText:
//
// Page fault was a demand zero fault.
//
#define
ERROR_PAGE_FAULT_DEMAND_ZERO
748L
//
// MessageId: ERROR_PAGE_FAULT_COPY_ON_WRITE
//
// MessageText:
//
// Page fault was a demand zero fault.
//
#define ERROR_PAGE_FAULT_COPY_ON_WRITE 749L
//
// MessageId: ERROR_PAGE_FAULT_GUARD_PAGE
//
// MessageText:
//
// Page fault was a demand zero fault.
//
#define
ERROR_PAGE_FAULT_GUARD_PAGE
750L
//
// MessageId: ERROR_PAGE_FAULT_PAGING_FILE
//
// MessageText:
//
// Page fault was satisfied by reading from a secondary storage device.
//
#define
ERROR_PAGE_FAULT_PAGING_FILE
751L
//
// MessageId: ERROR_CACHE_PAGE_LOCKED
//
// MessageText:
//
// Cached page was locked during operation.
//
#define
ERROR_CACHE_PAGE_LOCKED
752L
//
// MessageId: ERROR_CRASH_DUMP
//
// MessageText:
//
// Crash dump exists in paging file.
//
#define
ERROR_CRASH_DUMP
753L
//
// MessageId: ERROR_BUFFER_ALL_ZEROS
//
// MessageText:
//
// Specified buffer contains all zeros.
//
#define
ERROR_BUFFER_ALL_ZEROS
754L
//
// MessageId: ERROR_REPARSE_OBJECT
//
// MessageText:
//
// A reparse should be performed by the Object Manager since the name
of the file resulted in a symbolic link.
//
#define
ERROR_REPARSE_OBJECT
755L
//
// MessageId: ERROR_RESOURCE_REQUIREMENTS_CHANGED
//
// MessageText:
//
// The device has succeeded a query-stop and its resource requirements
have changed.
//
#define ERROR_RESOURCE_REQUIREMENTS_CHANGED 756L
//
// MessageId: ERROR_TRANSLATION_COMPLETE
//
// MessageText:
//
// The translator has translated these resources into the global space
and no further translations should be performed.
//
#define
ERROR_TRANSLATION_COMPLETE
757L
//
// MessageId: ERROR_NOTHING_TO_TERMINATE
//
// MessageText:
//
// A process being terminated has no threads to terminate.
//
#define
ERROR_NOTHING_TO_TERMINATE
758L
//
// MessageId: ERROR_PROCESS_NOT_IN_JOB
//
// MessageText:
//
// The specified process is not part of a job.
//
#define
ERROR_PROCESS_NOT_IN_JOB
759L
//
// MessageId: ERROR_PROCESS_IN_JOB
//
// MessageText:
//
// The specified process is part of a job.
//
#define
ERROR_PROCESS_IN_JOB
760L
//
// MessageId: ERROR_VOLSNAP_HIBERNATE_READY
//
// MessageText:
//
// {Volume Shadow Copy Service}
// The system is now ready for hibernation.
//
#define ERROR_VOLSNAP_HIBERNATE_READY 761L
//
// MessageId: ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY
//
// MessageText:
//
// A file system or file system filter driver has successfully
completed an FsFilter operation.
//
#define ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY 762L
//
// MessageId: ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED
//
// MessageText:
//
// The specified interrupt vector was already connected.
//
#define ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED 763L
//
// MessageId: ERROR_INTERRUPT_STILL_CONNECTED
//
// MessageText:
//
// The specified interrupt vector is still connected.
//
#define ERROR_INTERRUPT_STILL_CONNECTED 764L
//
// MessageId: ERROR_WAIT_FOR_OPLOCK
//
// MessageText:
//
// An operation is blocked waiting for an oplock.
//
#define
ERROR_WAIT_FOR_OPLOCK
765L
//
// MessageId: ERROR_DBG_EXCEPTION_HANDLED
//
// MessageText:
//
// Debugger handled exception
//
#define
ERROR_DBG_EXCEPTION_HANDLED
766L // winnt
//
// MessageId: ERROR_DBG_CONTINUE
//
// MessageText:
//
// Debugger continued
//
#define
ERROR_DBG_CONTINUE
767L // winnt
//
// MessageId: ERROR_CALLBACK_POP_STACK
//
// MessageText:
//
// An exception occurred in a user mode callback and the kernel
callback frame should be removed.
//
#define
ERROR_CALLBACK_POP_STACK
768L
//
// MessageId: ERROR_COMPRESSION_DISABLED
//
// MessageText:
//
// Compression is disabled for this volume.
//
#define
ERROR_COMPRESSION_DISABLED
769L
//
// MessageId: ERROR_CANTFETCHBACKWARDS
//
// MessageText:
//
// The data provider cannot fetch backwards through a result set.
//
#define
ERROR_CANTFETCHBACKWARDS
770L
//
// MessageId: ERROR_CANTSCROLLBACKWARDS
//
// MessageText:
//
// The data provider cannot scroll backwards through a result set.
//
#define
ERROR_CANTSCROLLBACKWARDS
771L
//
// MessageId: ERROR_ROWSNOTRELEASED
//
// MessageText:
//
// The data provider requires that previously fetched data is released
before asking for more data.
//
#define
ERROR_ROWSNOTRELEASED
772L
//
// MessageId: ERROR_BAD_ACCESSOR_FLAGS
//
// MessageText:
//
// The data provider was not able to interpret the flags set for a
column binding in an accessor.
//
#define
ERROR_BAD_ACCESSOR_FLAGS
773L
//
// MessageId: ERROR_ERRORS_ENCOUNTERED
//
// MessageText:
//
// One or more errors occurred while processing the request.
//
#define
ERROR_ERRORS_ENCOUNTERED
774L
//
// MessageId: ERROR_NOT_CAPABLE
//
// MessageText:
//
// The implementation is not capable of performing the request.
//
#define
ERROR_NOT_CAPABLE
775L
//
// MessageId: ERROR_REQUEST_OUT_OF_SEQUENCE
//
// MessageText:
//
// The client of a component requested an operation which is not valid
given the state of the component instance.
//
#define ERROR_REQUEST_OUT_OF_SEQUENCE 776L
//
// MessageId: ERROR_VERSION_PARSE_ERROR
//
// MessageText:
//
// A version number could not be parsed.
//
#define
ERROR_VERSION_PARSE_ERROR
777L
//
// MessageId: ERROR_BADSTARTPOSITION
//
// MessageText:
//
// The iterator's start position is invalid.
//
#define
ERROR_BADSTARTPOSITION
778L
//
// MessageId: ERROR_MEMORY_HARDWARE
//
// MessageText:
//
// The hardware has reported an uncorrectable memory error.
//
#define
ERROR_MEMORY_HARDWARE
779L
//
// MessageId: ERROR_DISK_REPAIR_DISABLED
//
// MessageText:
//
// The attempted operation required self healing to be enabled.
//
#define
ERROR_DISK_REPAIR_DISABLED
780L
//
// MessageId:
ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE
//
// MessageText:
//
// The Desktop heap encountered an error while allocating session
memory. There is more information in the system event log.
//
#define ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE
781L
//
// MessageId: ERROR_SYSTEM_POWERSTATE_TRANSITION
//
// MessageText:
//
// The system power state is transitioning from %2 to %3.
//
#define ERROR_SYSTEM_POWERSTATE_TRANSITION 782L
//
// MessageId: ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION
//
// MessageText:
//
// The system power state is transitioning from %2 to %3 but could
enter %4.
//
#define ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION 783L
//
// MessageId: ERROR_MCA_EXCEPTION
//
// MessageText:
//
// A thread is getting dispatched with MCA EXCEPTION because of MCA.
//
#define
ERROR_MCA_EXCEPTION
784L
//
// MessageId: ERROR_ACCESS_AUDIT_BY_POLICY
//
// MessageText:
//
// Access to %1 is monitored by policy rule %2.
//
#define
ERROR_ACCESS_AUDIT_BY_POLICY
785L
//
// MessageId: ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY
//
// MessageText:
//
// Access to %1 has been restricted by your Administrator by policy
rule %2.
//
#define ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY 786L
//
// MessageId: ERROR_ABANDON_HIBERFILE
//
// MessageText:
//
// A valid hibernation file has been invalidated and should be
abandoned.
//
#define
ERROR_ABANDON_HIBERFILE
787L
//
// MessageId: ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED
//
// MessageText:
//
// {Delayed Write Failed}
// Windows was unable to save all the data for the file %hs; the data
has been lost.
// This error may be caused by network connectivity issues. Please try
to save this file elsewhere.
//
#define ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED 788L
//
// MessageId: ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR
//
// MessageText:
//
// {Delayed Write Failed}
// Windows was unable to save all the data for the file %hs; the data
has been lost.
// This error was returned by the server on which the file exists.
Please try to save this file elsewhere.
//
#define ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR 789L
//
// MessageId: ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR
//
// MessageText:
//
// {Delayed Write Failed}
// Windows was unable to save all the data for the file %hs; the data
has been lost.
// This error may be caused if the device has been removed or the media
is write-protected.
//
#define ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR 790L
//
// MessageId: ERROR_BAD_MCFG_TABLE
//
// MessageText:
//
// The resources required for this device conflict with the MCFG table.
//
#define
ERROR_BAD_MCFG_TABLE
791L
//
// MessageId: ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE
//
// MessageText:
//
// The oplock that was associated with this handle is now associated
with a different handle.
//
#define ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE 800L
//
// MessageId: ERROR_CANNOT_GRANT_REQUESTED_OPLOCK
//
// MessageText:
//
// An oplock of the requested level cannot be granted. An
oplock of a lower level may be available.
//
#define ERROR_CANNOT_GRANT_REQUESTED_OPLOCK 801L
//
// MessageId: ERROR_CANNOT_BREAK_OPLOCK
//
// MessageText:
//
//
The operation did not complete successfully because it would cause an
oplock to be broken. The caller has requested that existing oplocks not
be broken.
//
#define
ERROR_CANNOT_BREAK_OPLOCK
802L
//
// MessageId: ERROR_OPLOCK_HANDLE_CLOSED
//
// MessageText:
//
// The handle with which this oplock was associated has been
closed. The oplock is now broken.
//
#define
ERROR_OPLOCK_HANDLE_CLOSED
803L
//
// MessageId: ERROR_NO_ACE_CONDITION
//
// MessageText:
//
// The specified access control entry (ACE) does not contain a
condition.
//
#define
ERROR_NO_ACE_CONDITION
804L
//
// MessageId: ERROR_INVALID_ACE_CONDITION
//
// MessageText:
//
// The specified access control entry (ACE) contains an invalid
condition.
//
#define
ERROR_INVALID_ACE_CONDITION
805L
//
// MessageId: ERROR_EA_ACCESS_DENIED
//
// MessageText:
//
// Access to the extended attribute was denied.
//
#define
ERROR_EA_ACCESS_DENIED
994L
//
// MessageId: ERROR_OPERATION_ABORTED
//
// MessageText:
//
// The I/O operation has been aborted because of either a thread exit
or an application request.
//
#define
ERROR_OPERATION_ABORTED
995L
//
// MessageId: ERROR_IO_INCOMPLETE
//
// MessageText:
//
// Overlapped I/O event is not in a signaled state.
//
#define
ERROR_IO_INCOMPLETE
996L
//
// MessageId: ERROR_IO_PENDING
//
// MessageText:
//
// Overlapped I/O operation is in progress.
//
#define
ERROR_IO_PENDING
997L // dderror
//
// MessageId: ERROR_NOACCESS
//
// MessageText:
//
// Invalid access to memory location.
//
#define
ERROR_NOACCESS
998L
//
// MessageId: ERROR_SWAPERROR
//
// MessageText:
//
// Error performing inpage operation.
//
#define
ERROR_SWAPERROR
999L
//
// MessageId: ERROR_STACK_OVERFLOW
//
// MessageText:
//
// Recursion too deep; the stack overflowed.
//
#define
ERROR_STACK_OVERFLOW
1001L
//
// MessageId: ERROR_INVALID_MESSAGE
//
// MessageText:
//
// The window cannot act on the sent message.
//
#define
ERROR_INVALID_MESSAGE
1002L
//
// MessageId: ERROR_CAN_NOT_COMPLETE
//
// MessageText:
//
// Cannot complete this function.
//
#define
ERROR_CAN_NOT_COMPLETE
1003L
//
// MessageId: ERROR_INVALID_FLAGS
//
// MessageText:
//
// Invalid flags.
//
#define
ERROR_INVALID_FLAGS
1004L
//
// MessageId: ERROR_UNRECOGNIZED_VOLUME
//
// MessageText:
//
// The volume does not contain a recognized file system.
// Please make sure that all required file system drivers are loaded
and that the volume is not corrupted.
//
#define
ERROR_UNRECOGNIZED_VOLUME
1005L
//
// MessageId: ERROR_FILE_INVALID
//
// MessageText:
//
// The volume for a file has been externally altered so that the opened
file is no longer valid.
//
#define
ERROR_FILE_INVALID
1006L
//
// MessageId: ERROR_FULLSCREEN_MODE
//
// MessageText:
//
// The requested operation cannot be performed in full-screen mode.
//
#define
ERROR_FULLSCREEN_MODE
1007L
//
// MessageId: ERROR_NO_TOKEN
//
// MessageText:
//
// An attempt was made to reference a token that does not exist.
//
#define
ERROR_NO_TOKEN
1008L
//
// MessageId: ERROR_BADDB
//
// MessageText:
//
// The configuration registry database is corrupt.
//
#define
ERROR_BADDB
1009L
//
// MessageId: ERROR_BADKEY
//
// MessageText:
//
// The configuration registry key is invalid.
//
#define
ERROR_BADKEY
1010L
//
// MessageId: ERROR_CANTOPEN
//
// MessageText:
//
// The configuration registry key could not be opened.
//
#define
ERROR_CANTOPEN
1011L
//
// MessageId: ERROR_CANTREAD
//
// MessageText:
//
// The configuration registry key could not be read.
//
#define
ERROR_CANTREAD
1012L
//
// MessageId: ERROR_CANTWRITE
//
// MessageText:
//
// The configuration registry key could not be written.
//
#define
ERROR_CANTWRITE
1013L
//
// MessageId: ERROR_REGISTRY_RECOVERED
//
// MessageText:
//
// One of the files in the registry database had to be recovered by use
of a log or alternate copy. The recovery was successful.
//
#define
ERROR_REGISTRY_RECOVERED
1014L
//
// MessageId: ERROR_REGISTRY_CORRUPT
//
// MessageText:
//
//
The registry is corrupted. The structure of one of the files containing
registry data is corrupted, or the system's memory image of the file is
corrupted, or the file could not be recovered because the alternate
copy or log was absent or corrupted.
//
#define
ERROR_REGISTRY_CORRUPT
1015L
//
// MessageId: ERROR_REGISTRY_IO_FAILED
//
// MessageText:
//
//
An I/O operation initiated by the registry failed unrecoverably. The
registry could not read in, or write out, or flush, one of the files
that contain the system's image of the registry.
//
#define
ERROR_REGISTRY_IO_FAILED
1016L
//
// MessageId: ERROR_NOT_REGISTRY_FILE
//
// MessageText:
//
//
The system has attempted to load or restore a file into the registry,
but the specified file is not in a registry file format.
//
#define
ERROR_NOT_REGISTRY_FILE
1017L
//
// MessageId: ERROR_KEY_DELETED
//
// MessageText:
//
// Illegal operation attempted on a registry key that has been marked
for deletion.
//
#define
ERROR_KEY_DELETED
1018L
//
// MessageId: ERROR_NO_LOG_SPACE
//
// MessageText:
//
// System could not allocate the required space in a registry log.
//
#define
ERROR_NO_LOG_SPACE
1019L
//
// MessageId: ERROR_KEY_HAS_CHILDREN
//
// MessageText:
//
// Cannot create a symbolic link in a registry key that already has
subkeys or values.
//
#define
ERROR_KEY_HAS_CHILDREN
1020L
//
// MessageId: ERROR_CHILD_MUST_BE_VOLATILE
//
// MessageText:
//
// Cannot create a stable subkey under a volatile parent key.
//
#define
ERROR_CHILD_MUST_BE_VOLATILE
1021L
//
// MessageId: ERROR_NOTIFY_ENUM_DIR
//
// MessageText:
//
//
A notify change request is being completed and the information is not
being returned in the caller's buffer. The caller now needs to
enumerate the files to find the changes.
//
#define
ERROR_NOTIFY_ENUM_DIR
1022L
//
// MessageId: ERROR_DEPENDENT_SERVICES_RUNNING
//
// MessageText:
//
// A stop control has been sent to a service that other running
services are dependent on.
//
#define ERROR_DEPENDENT_SERVICES_RUNNING 1051L
//
// MessageId: ERROR_INVALID_SERVICE_CONTROL
//
// MessageText:
//
// The requested control is not valid for this service.
//
#define ERROR_INVALID_SERVICE_CONTROL
1052L
//
// MessageId: ERROR_SERVICE_REQUEST_TIMEOUT
//
// MessageText:
//
// The service did not respond to the start or control request in a
timely fashion.
//
#define ERROR_SERVICE_REQUEST_TIMEOUT
1053L
//
// MessageId: ERROR_SERVICE_NO_THREAD
//
// MessageText:
//
// A thread could not be created for the service.
//
#define
ERROR_SERVICE_NO_THREAD
1054L
//
// MessageId: ERROR_SERVICE_DATABASE_LOCKED
//
// MessageText:
//
// The service database is locked.
//
#define ERROR_SERVICE_DATABASE_LOCKED
1055L
//
// MessageId: ERROR_SERVICE_ALREADY_RUNNING
//
// MessageText:
//
// An instance of the service is already running.
//
#define ERROR_SERVICE_ALREADY_RUNNING
1056L
//
// MessageId: ERROR_INVALID_SERVICE_ACCOUNT
//
// MessageText:
//
// The account name is invalid or does not exist, or the password is
invalid for the account name specified.
//
#define ERROR_INVALID_SERVICE_ACCOUNT
1057L
//
// MessageId: ERROR_SERVICE_DISABLED
//
// MessageText:
//
// The service cannot be started, either because it is disabled or
because it has no enabled devices associated with it.
//
#define
ERROR_SERVICE_DISABLED
1058L
//
// MessageId: ERROR_CIRCULAR_DEPENDENCY
//
// MessageText:
//
// Circular service dependency was specified.
//
#define
ERROR_CIRCULAR_DEPENDENCY
1059L
//
// MessageId: ERROR_SERVICE_DOES_NOT_EXIST
//
// MessageText:
//
// The specified service does not exist as an installed service.
//
#define
ERROR_SERVICE_DOES_NOT_EXIST
1060L
//
// MessageId: ERROR_SERVICE_CANNOT_ACCEPT_CTRL
//
// MessageText:
//
// The service cannot accept control messages at this time.
//
#define ERROR_SERVICE_CANNOT_ACCEPT_CTRL 1061L
//
// MessageId: ERROR_SERVICE_NOT_ACTIVE
//
// MessageText:
//
// The service has not been started.
//
#define
ERROR_SERVICE_NOT_ACTIVE
1062L
//
// MessageId: ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
//
// MessageText:
//
// The service process could not connect to the service controller.
//
#define ERROR_FAILED_SERVICE_CONTROLLER_CONNECT 1063L
//
// MessageId: ERROR_EXCEPTION_IN_SERVICE
//
// MessageText:
//
// An exception occurred in the service when handling the control
request.
//
#define
ERROR_EXCEPTION_IN_SERVICE
1064L
//
// MessageId: ERROR_DATABASE_DOES_NOT_EXIST
//
// MessageText:
//
// The database specified does not exist.
//
#define ERROR_DATABASE_DOES_NOT_EXIST
1065L
//
// MessageId: ERROR_SERVICE_SPECIFIC_ERROR
//
// MessageText:
//
// The service has returned a service-specific error code.
//
#define
ERROR_SERVICE_SPECIFIC_ERROR
1066L
//
// MessageId: ERROR_PROCESS_ABORTED
//
// MessageText:
//
// The process terminated unexpectedly.
//
#define
ERROR_PROCESS_ABORTED
1067L
//
// MessageId: ERROR_SERVICE_DEPENDENCY_FAIL
//
// MessageText:
//
// The dependency service or group failed to start.
//
#define ERROR_SERVICE_DEPENDENCY_FAIL
1068L
//
// MessageId: ERROR_SERVICE_LOGON_FAILED
//
// MessageText:
//
// The service did not start due to a logon failure.
//
#define
ERROR_SERVICE_LOGON_FAILED
1069L
//
// MessageId: ERROR_SERVICE_START_HANG
//
// MessageText:
//
// After starting, the service hung in a start-pending state.
//
#define
ERROR_SERVICE_START_HANG
1070L
//
// MessageId: ERROR_INVALID_SERVICE_LOCK
//
// MessageText:
//
// The specified service database lock is invalid.
//
#define
ERROR_INVALID_SERVICE_LOCK
1071L
//
// MessageId: ERROR_SERVICE_MARKED_FOR_DELETE
//
// MessageText:
//
// The specified service has been marked for deletion.
//
#define ERROR_SERVICE_MARKED_FOR_DELETE 1072L
//
// MessageId: ERROR_SERVICE_EXISTS
//
// MessageText:
//
// The specified service already exists.
//
#define
ERROR_SERVICE_EXISTS
1073L
//
// MessageId: ERROR_ALREADY_RUNNING_LKG
//
// MessageText:
//
// The system is currently running with the last-known-good
configuration.
//
#define
ERROR_ALREADY_RUNNING_LKG
1074L
//
// MessageId: ERROR_SERVICE_DEPENDENCY_DELETED
//
// MessageText:
//
// The dependency service does not exist or has been marked for
deletion.
//
#define ERROR_SERVICE_DEPENDENCY_DELETED 1075L
//
// MessageId: ERROR_BOOT_ALREADY_ACCEPTED
//
// MessageText:
//
// The current boot has already been accepted for use as the
last-known-good control set.
//
#define
ERROR_BOOT_ALREADY_ACCEPTED
1076L
//
// MessageId: ERROR_SERVICE_NEVER_STARTED
//
// MessageText:
//
// No attempts to start the service have been made since the last boot.
//
#define
ERROR_SERVICE_NEVER_STARTED
1077L
//
// MessageId: ERROR_DUPLICATE_SERVICE_NAME
//
// MessageText:
//
// The name is already in use as either a service name or a service
display name.
//
#define
ERROR_DUPLICATE_SERVICE_NAME
1078L
//
// MessageId: ERROR_DIFFERENT_SERVICE_ACCOUNT
//
// MessageText:
//
//
The account specified for this service is different from the account
specified for other services running in the same process.
//
#define ERROR_DIFFERENT_SERVICE_ACCOUNT 1079L
//
// MessageId: ERROR_CANNOT_DETECT_DRIVER_FAILURE
//
// MessageText:
//
// Failure actions can only be set for Win32 services, not for drivers.
//
#define ERROR_CANNOT_DETECT_DRIVER_FAILURE 1080L
//
// MessageId: ERROR_CANNOT_DETECT_PROCESS_ABORT
//
// MessageText:
//
// This service runs in the same process as the service control manager.
// Therefore, the service control manager cannot take action if this
service's process terminates unexpectedly.
//
#define ERROR_CANNOT_DETECT_PROCESS_ABORT 1081L
//
// MessageId: ERROR_NO_RECOVERY_PROGRAM
//
// MessageText:
//
// No recovery program has been configured for this service.
//
#define
ERROR_NO_RECOVERY_PROGRAM
1082L
//
// MessageId: ERROR_SERVICE_NOT_IN_EXE
//
// MessageText:
//
// The executable program that this service is configured to run in
does not implement the service.
//
#define
ERROR_SERVICE_NOT_IN_EXE
1083L
//
// MessageId: ERROR_NOT_SAFEBOOT_SERVICE
//
// MessageText:
//
// This service cannot be started in Safe Mode
//
#define
ERROR_NOT_SAFEBOOT_SERVICE
1084L
//
// MessageId: ERROR_END_OF_MEDIA
//
// MessageText:
//
// The physical end of the tape has been reached.
//
#define
ERROR_END_OF_MEDIA
1100L
//
// MessageId: ERROR_FILEMARK_DETECTED
//
// MessageText:
//
// A tape access reached a filemark.
//
#define
ERROR_FILEMARK_DETECTED
1101L
//
// MessageId: ERROR_BEGINNING_OF_MEDIA
//
// MessageText:
//
// The beginning of the tape or a partition was encountered.
//
#define
ERROR_BEGINNING_OF_MEDIA
1102L
//
// MessageId: ERROR_SETMARK_DETECTED
//
// MessageText:
//
// A tape access reached the end of a set of files.
//
#define
ERROR_SETMARK_DETECTED
1103L
//
// MessageId: ERROR_NO_DATA_DETECTED
//
// MessageText:
//
// No more data is on the tape.
//
#define
ERROR_NO_DATA_DETECTED
1104L
//
// MessageId: ERROR_PARTITION_FAILURE
//
// MessageText:
//
// Tape could not be partitioned.
//
#define
ERROR_PARTITION_FAILURE
1105L
//
// MessageId: ERROR_INVALID_BLOCK_LENGTH
//
// MessageText:
//
// When accessing a new tape of a multivolume partition, the current
block size is incorrect.
//
#define
ERROR_INVALID_BLOCK_LENGTH
1106L
//
// MessageId: ERROR_DEVICE_NOT_PARTITIONED
//
// MessageText:
//
// Tape partition information could not be found when loading a tape.
//
#define
ERROR_DEVICE_NOT_PARTITIONED
1107L
//
// MessageId: ERROR_UNABLE_TO_LOCK_MEDIA
//
// MessageText:
//
// Unable to lock the media eject mechanism.
//
#define
ERROR_UNABLE_TO_LOCK_MEDIA
1108L
//
// MessageId: ERROR_UNABLE_TO_UNLOAD_MEDIA
//
// MessageText:
//
// Unable to unload the media.
//
#define
ERROR_UNABLE_TO_UNLOAD_MEDIA
1109L
//
// MessageId: ERROR_MEDIA_CHANGED
//
// MessageText:
//
// The media in the drive may have changed.
//
#define
ERROR_MEDIA_CHANGED
1110L
//
// MessageId: ERROR_BUS_RESET
//
// MessageText:
//
// The I/O bus was reset.
//
#define
ERROR_BUS_RESET
1111L
//
// MessageId: ERROR_NO_MEDIA_IN_DRIVE
//
// MessageText:
//
// No media in drive.
//
#define
ERROR_NO_MEDIA_IN_DRIVE
1112L
//
// MessageId: ERROR_NO_UNICODE_TRANSLATION
//
// MessageText:
//
// No mapping for the Unicode character exists in the target multi-byte
code page.
//
#define
ERROR_NO_UNICODE_TRANSLATION
1113L
//
// MessageId: ERROR_DLL_INIT_FAILED
//
// MessageText:
//
// A dynamic link library (DLL) initialization routine failed.
//
#define
ERROR_DLL_INIT_FAILED
1114L
//
// MessageId: ERROR_SHUTDOWN_IN_PROGRESS
//
// MessageText:
//
// A system shutdown is in progress.
//
#define
ERROR_SHUTDOWN_IN_PROGRESS
1115L
//
// MessageId: ERROR_NO_SHUTDOWN_IN_PROGRESS
//
// MessageText:
//
// Unable to abort the system shutdown because no shutdown was in
progress.
//
#define ERROR_NO_SHUTDOWN_IN_PROGRESS
1116L
//
// MessageId: ERROR_IO_DEVICE
//
// MessageText:
//
// The request could not be performed because of an I/O device error.
//
#define
ERROR_IO_DEVICE
1117L
//
// MessageId: ERROR_SERIAL_NO_DEVICE
//
// MessageText:
//
// No serial device was successfully initialized. The serial driver
will unload.
//
#define
ERROR_SERIAL_NO_DEVICE
1118L
//
// MessageId: ERROR_IRQ_BUSY
//
// MessageText:
//
//
Unable to open a device that was sharing an interrupt request (IRQ)
with other devices. At least one other device that uses that IRQ was
already opened.
//
#define
ERROR_IRQ_BUSY
1119L
//
// MessageId: ERROR_MORE_WRITES
//
// MessageText:
//
// A serial I/O operation was completed by another write to the serial
port.
// (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
//
#define
ERROR_MORE_WRITES
1120L
//
// MessageId: ERROR_COUNTER_TIMEOUT
//
// MessageText:
//
// A serial I/O operation completed because the timeout period expired.
// (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
//
#define
ERROR_COUNTER_TIMEOUT
1121L
//
// MessageId: ERROR_FLOPPY_ID_MARK_NOT_FOUND
//
// MessageText:
//
// No ID address mark was found on the floppy disk.
//
#define ERROR_FLOPPY_ID_MARK_NOT_FOUND 1122L
//
// MessageId: ERROR_FLOPPY_WRONG_CYLINDER
//
// MessageText:
//
// Mismatch between the floppy disk sector ID field and the floppy disk
controller track address.
//
#define
ERROR_FLOPPY_WRONG_CYLINDER
1123L
//
// MessageId: ERROR_FLOPPY_UNKNOWN_ERROR
//
// MessageText:
//
// The floppy disk controller reported an error that is not recognized
by the floppy disk driver.
//
#define
ERROR_FLOPPY_UNKNOWN_ERROR
1124L
//
// MessageId: ERROR_FLOPPY_BAD_REGISTERS
//
// MessageText:
//
// The floppy disk controller returned inconsistent results in its
registers.
//
#define
ERROR_FLOPPY_BAD_REGISTERS
1125L
//
// MessageId: ERROR_DISK_RECALIBRATE_FAILED
//
// MessageText:
//
// While accessing the hard disk, a recalibrate operation failed, even
after retries.
//
#define ERROR_DISK_RECALIBRATE_FAILED
1126L
//
// MessageId: ERROR_DISK_OPERATION_FAILED
//
// MessageText:
//
// While accessing the hard disk, a disk operation failed even after
retries.
//
#define
ERROR_DISK_OPERATION_FAILED
1127L
//
// MessageId: ERROR_DISK_RESET_FAILED
//
// MessageText:
//
// While accessing the hard disk, a disk controller reset was needed,
but even that failed.
//
#define
ERROR_DISK_RESET_FAILED
1128L
//
// MessageId: ERROR_EOM_OVERFLOW
//
// MessageText:
//
// Physical end of tape encountered.
//
#define
ERROR_EOM_OVERFLOW
1129L
//
// MessageId: ERROR_NOT_ENOUGH_SERVER_MEMORY
//
// MessageText:
//
// Not enough server storage is available to process this command.
//
#define ERROR_NOT_ENOUGH_SERVER_MEMORY 1130L
//
// MessageId: ERROR_POSSIBLE_DEADLOCK
//
// MessageText:
//
// A potential deadlock condition has been detected.
//
#define
ERROR_POSSIBLE_DEADLOCK
1131L
//
// MessageId: ERROR_MAPPED_ALIGNMENT
//
// MessageText:
//
// The base address or the file offset specified does not have the
proper alignment.
//
#define
ERROR_MAPPED_ALIGNMENT
1132L
//
// MessageId: ERROR_SET_POWER_STATE_VETOED
//
// MessageText:
//
// An attempt to change the system power state was vetoed by another
application or driver.
//
#define
ERROR_SET_POWER_STATE_VETOED
1140L
//
// MessageId: ERROR_SET_POWER_STATE_FAILED
//
// MessageText:
//
// The system BIOS failed an attempt to change the system power state.
//
#define
ERROR_SET_POWER_STATE_FAILED
1141L
//
// MessageId: ERROR_TOO_MANY_LINKS
//
// MessageText:
//
// An attempt was made to create more links on a file than the file
system supports.
//
#define
ERROR_TOO_MANY_LINKS
1142L
//
// MessageId: ERROR_OLD_WIN_VERSION
//
// MessageText:
//
// The specified program requires a newer version of Windows.
//
#define
ERROR_OLD_WIN_VERSION
1150L
//
// MessageId: ERROR_APP_WRONG_OS
//
// MessageText:
//
// The specified program is not a Windows or MS-DOS program.
//
#define
ERROR_APP_WRONG_OS
1151L
//
// MessageId: ERROR_SINGLE_INSTANCE_APP
//
// MessageText:
//
// Cannot start more than one instance of the specified program.
//
#define
ERROR_SINGLE_INSTANCE_APP
1152L
//
// MessageId: ERROR_RMODE_APP
//
// MessageText:
//
// The specified program was written for an earlier version of Windows.
//
#define
ERROR_RMODE_APP
1153L
//
// MessageId: ERROR_INVALID_DLL
//
// MessageText:
//
// One of the library files needed to run this application is damaged.
//
#define
ERROR_INVALID_DLL
1154L
//
// MessageId: ERROR_NO_ASSOCIATION
//
// MessageText:
//
// No application is associated with the specified file for this
operation.
//
#define
ERROR_NO_ASSOCIATION
1155L
//
// MessageId: ERROR_DDE_FAIL
//
// MessageText:
//
// An error occurred in sending the command to the application.
//
#define
ERROR_DDE_FAIL
1156L
//
// MessageId: ERROR_DLL_NOT_FOUND
//
// MessageText:
//
// One of the library files needed to run this application cannot be
found.
//
#define
ERROR_DLL_NOT_FOUND
1157L
//
// MessageId: ERROR_NO_MORE_USER_HANDLES
//
// MessageText:
//
// The current process has used all of its system allowance of handles
for Window Manager objects.
//
#define
ERROR_NO_MORE_USER_HANDLES
1158L
//
// MessageId: ERROR_MESSAGE_SYNC_ONLY
//
// MessageText:
//
// The message can be used only with synchronous operations.
//
#define
ERROR_MESSAGE_SYNC_ONLY
1159L
//
// MessageId: ERROR_SOURCE_ELEMENT_EMPTY
//
// MessageText:
//
// The indicated source element has no media.
//
#define
ERROR_SOURCE_ELEMENT_EMPTY
1160L
//
// MessageId: ERROR_DESTINATION_ELEMENT_FULL
//
// MessageText:
//
// The indicated destination element already contains media.
//
#define ERROR_DESTINATION_ELEMENT_FULL 1161L
//
// MessageId: ERROR_ILLEGAL_ELEMENT_ADDRESS
//
// MessageText:
//
// The indicated element does not exist.
//
#define ERROR_ILLEGAL_ELEMENT_ADDRESS
1162L
//
// MessageId: ERROR_MAGAZINE_NOT_PRESENT
//
// MessageText:
//
// The indicated element is part of a magazine that is not present.
//
#define
ERROR_MAGAZINE_NOT_PRESENT
1163L
//
// MessageId: ERROR_DEVICE_REINITIALIZATION_NEEDED
//
// MessageText:
//
// The indicated device requires reinitialization due to hardware
errors.
//
#define ERROR_DEVICE_REINITIALIZATION_NEEDED
1164L // dderror
//
// MessageId: ERROR_DEVICE_REQUIRES_CLEANING
//
// MessageText:
//
// The device has indicated that cleaning is required before further
operations are attempted.
//
#define ERROR_DEVICE_REQUIRES_CLEANING 1165L
//
// MessageId: ERROR_DEVICE_DOOR_OPEN
//
// MessageText:
//
// The device has indicated that its door is open.
//
#define
ERROR_DEVICE_DOOR_OPEN
1166L
//
// MessageId: ERROR_DEVICE_NOT_CONNECTED
//
// MessageText:
//
// The device is not connected.
//
#define
ERROR_DEVICE_NOT_CONNECTED
1167L
//
// MessageId: ERROR_NOT_FOUND
//
// MessageText:
//
// Element not found.
//
#define
ERROR_NOT_FOUND
1168L
//
// MessageId: ERROR_NO_MATCH
//
// MessageText:
//
// There was no match for the specified key in the index.
//
#define
ERROR_NO_MATCH
1169L
//
// MessageId: ERROR_SET_NOT_FOUND
//
// MessageText:
//
// The property set specified does not exist on the object.
//
#define
ERROR_SET_NOT_FOUND
1170L
//
// MessageId: ERROR_POINT_NOT_FOUND
//
// MessageText:
//
// The point passed to GetMouseMovePoints is not in the buffer.
//
#define
ERROR_POINT_NOT_FOUND
1171L
//
// MessageId: ERROR_NO_TRACKING_SERVICE
//
// MessageText:
//
// The tracking (workstation) service is not running.
//
#define
ERROR_NO_TRACKING_SERVICE
1172L
//
// MessageId: ERROR_NO_VOLUME_ID
//
// MessageText:
//
// The Volume ID could not be found.
//
#define
ERROR_NO_VOLUME_ID
1173L
//
// MessageId: ERROR_UNABLE_TO_REMOVE_REPLACED
//
// MessageText:
//
// Unable to remove the file to be replaced.
//
#define ERROR_UNABLE_TO_REMOVE_REPLACED 1175L
//
// MessageId: ERROR_UNABLE_TO_MOVE_REPLACEMENT
//
// MessageText:
//
// Unable to move the replacement file to the file to be replaced. The
file to be replaced has retained its original name.
//
#define ERROR_UNABLE_TO_MOVE_REPLACEMENT 1176L
//
// MessageId: ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
//
// MessageText:
//
//
Unable to move the replacement file to the file to be replaced. The
file to be replaced has been renamed using the backup name.
//
#define ERROR_UNABLE_TO_MOVE_REPLACEMENT_2 1177L
//
// MessageId: ERROR_JOURNAL_DELETE_IN_PROGRESS
//
// MessageText:
//
// The volume change journal is being deleted.
//
#define ERROR_JOURNAL_DELETE_IN_PROGRESS 1178L
//
// MessageId: ERROR_JOURNAL_NOT_ACTIVE
//
// MessageText:
//
// The volume change journal is not active.
//
#define
ERROR_JOURNAL_NOT_ACTIVE
1179L
//
// MessageId: ERROR_POTENTIAL_FILE_FOUND
//
// MessageText:
//
// A file was found, but it may not be the correct file.
//
#define
ERROR_POTENTIAL_FILE_FOUND
1180L
//
// MessageId: ERROR_JOURNAL_ENTRY_DELETED
//
// MessageText:
//
// The journal entry has been deleted from the journal.
//
#define
ERROR_JOURNAL_ENTRY_DELETED
1181L
//
// MessageId: ERROR_SHUTDOWN_IS_SCHEDULED
//
// MessageText:
//
// A system shutdown has already been scheduled.
//
#define
ERROR_SHUTDOWN_IS_SCHEDULED
1190L
//
// MessageId: ERROR_SHUTDOWN_USERS_LOGGED_ON
//
// MessageText:
//
// The system shutdown cannot be initiated because there are other
users logged on to the computer.
//
#define ERROR_SHUTDOWN_USERS_LOGGED_ON 1191L
//
// MessageId: ERROR_BAD_DEVICE
//
// MessageText:
//
// The specified device name is invalid.
//
#define
ERROR_BAD_DEVICE
1200L
//
// MessageId: ERROR_CONNECTION_UNAVAIL
//
// MessageText:
//
// The device is not currently connected but it is a remembered
connection.
//
#define
ERROR_CONNECTION_UNAVAIL
1201L
//
// MessageId: ERROR_DEVICE_ALREADY_REMEMBERED
//
// MessageText:
//
// The local device name has a remembered connection to another network
resource.
//
#define ERROR_DEVICE_ALREADY_REMEMBERED 1202L
//
// MessageId: ERROR_NO_NET_OR_BAD_PATH
//
// MessageText:
//
//
The network path was either typed incorrectly, does not exist, or the
network provider is not currently available. Please try retyping the
path or contact your network administrator.
//
#define
ERROR_NO_NET_OR_BAD_PATH
1203L
//
// MessageId: ERROR_BAD_PROVIDER
//
// MessageText:
//
// The specified network provider name is invalid.
//
#define
ERROR_BAD_PROVIDER
1204L
//
// MessageId: ERROR_CANNOT_OPEN_PROFILE
//
// MessageText:
//
// Unable to open the network connection profile.
//
#define
ERROR_CANNOT_OPEN_PROFILE
1205L
//
// MessageId: ERROR_BAD_PROFILE
//
// MessageText:
//
// The network connection profile is corrupted.
//
#define
ERROR_BAD_PROFILE
1206L
//
// MessageId: ERROR_NOT_CONTAINER
//
// MessageText:
//
// Cannot enumerate a noncontainer.
//
#define
ERROR_NOT_CONTAINER
1207L
//
// MessageId: ERROR_EXTENDED_ERROR
//
// MessageText:
//
// An extended error has occurred.
//
#define
ERROR_EXTENDED_ERROR
1208L
//
// MessageId: ERROR_INVALID_GROUPNAME
//
// MessageText:
//
// The format of the specified group name is invalid.
//
#define
ERROR_INVALID_GROUPNAME
1209L
//
// MessageId: ERROR_INVALID_COMPUTERNAME
//
// MessageText:
//
// The format of the specified computer name is invalid.
//
#define
ERROR_INVALID_COMPUTERNAME
1210L
//
// MessageId: ERROR_INVALID_EVENTNAME
//
// MessageText:
//
// The format of the specified event name is invalid.
//
#define
ERROR_INVALID_EVENTNAME
1211L
//
// MessageId: ERROR_INVALID_DOMAINNAME
//
// MessageText:
//
// The format of the specified domain name is invalid.
//
#define
ERROR_INVALID_DOMAINNAME
1212L
//
// MessageId: ERROR_INVALID_SERVICENAME
//
// MessageText:
//
// The format of the specified service name is invalid.
//
#define
ERROR_INVALID_SERVICENAME
1213L
//
// MessageId: ERROR_INVALID_NETNAME
//
// MessageText:
//
// The format of the specified network name is invalid.
//
#define
ERROR_INVALID_NETNAME
1214L
//
// MessageId: ERROR_INVALID_SHARENAME
//
// MessageText:
//
// The format of the specified share name is invalid.
//
#define
ERROR_INVALID_SHARENAME
1215L
//
// MessageId: ERROR_INVALID_PASSWORDNAME
//
// MessageText:
//
// The format of the specified password is invalid.
//
#define
ERROR_INVALID_PASSWORDNAME
1216L
//
// MessageId: ERROR_INVALID_MESSAGENAME
//
// MessageText:
//
// The format of the specified message name is invalid.
//
#define
ERROR_INVALID_MESSAGENAME
1217L
//
// MessageId: ERROR_INVALID_MESSAGEDEST
//
// MessageText:
//
// The format of the specified message destination is invalid.
//
#define
ERROR_INVALID_MESSAGEDEST
1218L
//
// MessageId: ERROR_SESSION_CREDENTIAL_CONFLICT
//
// MessageText:
//
//
Multiple connections to a server or shared resource by the same user,
using more than one user name, are not allowed. Disconnect all previous
connections to the server or shared resource and try again.
//
#define ERROR_SESSION_CREDENTIAL_CONFLICT 1219L
//
// MessageId: ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
//
// MessageText:
//
//
An attempt was made to establish a session to a network server, but
there are already too many sessions established to that server.
//
#define ERROR_REMOTE_SESSION_LIMIT_EXCEEDED 1220L
//
// MessageId: ERROR_DUP_DOMAINNAME
//
// MessageText:
//
// The workgroup or domain name is already in use by another computer
on the network.
//
#define
ERROR_DUP_DOMAINNAME
1221L
//
// MessageId: ERROR_NO_NETWORK
//
// MessageText:
//
// The network is not present or not started.
//
#define
ERROR_NO_NETWORK
1222L
//
// MessageId: ERROR_CANCELLED
//
// MessageText:
//
// The operation was canceled by the user.
//
#define
ERROR_CANCELLED
1223L
//
// MessageId: ERROR_USER_MAPPED_FILE
//
// MessageText:
//
// The requested operation cannot be performed on a file with a
user-mapped section open.
//
#define
ERROR_USER_MAPPED_FILE
1224L
//
// MessageId: ERROR_CONNECTION_REFUSED
//
// MessageText:
//
// The remote computer refused the network connection.
//
#define
ERROR_CONNECTION_REFUSED
1225L
//
// MessageId: ERROR_GRACEFUL_DISCONNECT
//
// MessageText:
//
// The network connection was gracefully closed.
//
#define
ERROR_GRACEFUL_DISCONNECT
1226L
//
// MessageId: ERROR_ADDRESS_ALREADY_ASSOCIATED
//
// MessageText:
//
// The network transport endpoint already has an address associated
with it.
//
#define ERROR_ADDRESS_ALREADY_ASSOCIATED 1227L
//
// MessageId: ERROR_ADDRESS_NOT_ASSOCIATED
//
// MessageText:
//
// An address has not yet been associated with the network endpoint.
//
#define
ERROR_ADDRESS_NOT_ASSOCIATED
1228L
//
// MessageId: ERROR_CONNECTION_INVALID
//
// MessageText:
//
// An operation was attempted on a nonexistent network connection.
//
#define
ERROR_CONNECTION_INVALID
1229L
//
// MessageId: ERROR_CONNECTION_ACTIVE
//
// MessageText:
//
// An invalid operation was attempted on an active network connection.
//
#define
ERROR_CONNECTION_ACTIVE
1230L
//
// MessageId: ERROR_NETWORK_UNREACHABLE
//
// MessageText:
//
// The network location cannot be reached. For information about
network troubleshooting, see Windows Help.
//
#define
ERROR_NETWORK_UNREACHABLE
1231L
//
// MessageId: ERROR_HOST_UNREACHABLE
//
// MessageText:
//
// The network location cannot be reached. For information about
network troubleshooting, see Windows Help.
//
#define
ERROR_HOST_UNREACHABLE
1232L
//
// MessageId: ERROR_PROTOCOL_UNREACHABLE
//
// MessageText:
//
// The network location cannot be reached. For information about
network troubleshooting, see Windows Help.
//
#define
ERROR_PROTOCOL_UNREACHABLE
1233L
//
// MessageId: ERROR_PORT_UNREACHABLE
//
// MessageText:
//
// No service is operating at the destination network endpoint on the
remote system.
//
#define
ERROR_PORT_UNREACHABLE
1234L
//
// MessageId: ERROR_REQUEST_ABORTED
//
// MessageText:
//
// The request was aborted.
//
#define
ERROR_REQUEST_ABORTED
1235L
//
// MessageId: ERROR_CONNECTION_ABORTED
//
// MessageText:
//
// The network connection was aborted by the local system.
//
#define
ERROR_CONNECTION_ABORTED
1236L
//
// MessageId: ERROR_RETRY
//
// MessageText:
//
// The operation could not be completed. A retry should be performed.
//
#define
ERROR_RETRY
1237L
//
// MessageId: ERROR_CONNECTION_COUNT_LIMIT
//
// MessageText:
//
//
A connection to the server could not be made because the limit on the
number of concurrent connections for this account has been reached.
//
#define
ERROR_CONNECTION_COUNT_LIMIT
1238L
//
// MessageId: ERROR_LOGIN_TIME_RESTRICTION
//
// MessageText:
//
// Attempting to log in during an unauthorized time of day for this
account.
//
#define
ERROR_LOGIN_TIME_RESTRICTION
1239L
//
// MessageId: ERROR_LOGIN_WKSTA_RESTRICTION
//
// MessageText:
//
// The account is not authorized to log in from this station.
//
#define ERROR_LOGIN_WKSTA_RESTRICTION
1240L
//
// MessageId: ERROR_INCORRECT_ADDRESS
//
// MessageText:
//
// The network address could not be used for the operation requested.
//
#define
ERROR_INCORRECT_ADDRESS
1241L
//
// MessageId: ERROR_ALREADY_REGISTERED
//
// MessageText:
//
// The service is already registered.
//
#define
ERROR_ALREADY_REGISTERED
1242L
//
// MessageId: ERROR_SERVICE_NOT_FOUND
//
// MessageText:
//
// The specified service does not exist.
//
#define
ERROR_SERVICE_NOT_FOUND
1243L
//
// MessageId: ERROR_NOT_AUTHENTICATED
//
// MessageText:
//
// The operation being requested was not performed because the user has
not been authenticated.
//
#define
ERROR_NOT_AUTHENTICATED
1244L
//
// MessageId: ERROR_NOT_LOGGED_ON
//
// MessageText:
//
//
The operation being requested was not performed because the user has
not logged on to the network. The specified service does not exist.
//
#define
ERROR_NOT_LOGGED_ON
1245L
//
// MessageId: ERROR_CONTINUE
//
// MessageText:
//
// Continue with work in progress.
//
#define
ERROR_CONTINUE
1246L // dderror
//
// MessageId: ERROR_ALREADY_INITIALIZED
//
// MessageText:
//
// An attempt was made to perform an initialization operation when
initialization has already been completed.
//
#define
ERROR_ALREADY_INITIALIZED
1247L
//
// MessageId: ERROR_NO_MORE_DEVICES
//
// MessageText:
//
// No more local devices.
//
#define
ERROR_NO_MORE_DEVICES
1248L // dderror
//
// MessageId: ERROR_NO_SUCH_SITE
//
// MessageText:
//
// The specified site does not exist.
//
#define
ERROR_NO_SUCH_SITE
1249L
//
// MessageId: ERROR_DOMAIN_CONTROLLER_EXISTS
//
// MessageText:
//
// A domain controller with the specified name already exists.
//
#define ERROR_DOMAIN_CONTROLLER_EXISTS 1250L
//
// MessageId: ERROR_ONLY_IF_CONNECTED
//
// MessageText:
//
// This operation is supported only when you are connected to the
server.
//
#define
ERROR_ONLY_IF_CONNECTED
1251L
//
// MessageId: ERROR_OVERRIDE_NOCHANGES
//
// MessageText:
//
// The group policy framework should call the extension even if there
are no changes.
//
#define
ERROR_OVERRIDE_NOCHANGES
1252L
//
// MessageId: ERROR_BAD_USER_PROFILE
//
// MessageText:
//
// The specified user does not have a valid profile.
//
#define
ERROR_BAD_USER_PROFILE
1253L
//
// MessageId: ERROR_NOT_SUPPORTED_ON_SBS
//
// MessageText:
//
// This operation is not supported on a computer running Windows Server
2003 for Small Business Server
//
#define
ERROR_NOT_SUPPORTED_ON_SBS
1254L
//
// MessageId: ERROR_SERVER_SHUTDOWN_IN_PROGRESS
//
// MessageText:
//
// The server machine is shutting down.
//
#define ERROR_SERVER_SHUTDOWN_IN_PROGRESS 1255L
//
// MessageId: ERROR_HOST_DOWN
//
// MessageText:
//
// The remote system is not available. For information about network
troubleshooting, see Windows Help.
//
#define
ERROR_HOST_DOWN
1256L
//
// MessageId: ERROR_NON_ACCOUNT_SID
//
// MessageText:
//
// The security identifier provided is not from an account domain.
//
#define
ERROR_NON_ACCOUNT_SID
1257L
//
// MessageId: ERROR_NON_DOMAIN_SID
//
// MessageText:
//
// The security identifier provided does not have a domain component.
//
#define
ERROR_NON_DOMAIN_SID
1258L
//
// MessageId: ERROR_APPHELP_BLOCK
//
// MessageText:
//
// AppHelp dialog canceled thus preventing the application from
starting.
//
#define
ERROR_APPHELP_BLOCK
1259L
//
// MessageId: ERROR_ACCESS_DISABLED_BY_POLICY
//
// MessageText:
//
// This program is blocked by group policy. For more information,
contact your system administrator.
//
#define ERROR_ACCESS_DISABLED_BY_POLICY 1260L
//
// MessageId: ERROR_REG_NAT_CONSUMPTION
//
// MessageText:
//
//
A program attempt to use an invalid register value. Normally caused by
an uninitialized register. This error is Itanium specific.
//
#define
ERROR_REG_NAT_CONSUMPTION
1261L
//
// MessageId: ERROR_CSCSHARE_OFFLINE
//
// MessageText:
//
// The share is currently offline or does not exist.
//
#define
ERROR_CSCSHARE_OFFLINE
1262L
//
// MessageId: ERROR_PKINIT_FAILURE
//
// MessageText:
//
//
The Kerberos protocol encountered an error while validating the KDC
certificate during smartcard logon. There is more information in the
system event log.
//
#define
ERROR_PKINIT_FAILURE
1263L
//
// MessageId: ERROR_SMARTCARD_SUBSYSTEM_FAILURE
//
// MessageText:
//
// The Kerberos protocol encountered an error while attempting to
utilize the smartcard subsystem.
//
#define ERROR_SMARTCARD_SUBSYSTEM_FAILURE 1264L
//
// MessageId: ERROR_DOWNGRADE_DETECTED
//
// MessageText:
//
//
The system detected a possible attempt to compromise security. Please
ensure that you can contact the server that authenticated you.
//
#define
ERROR_DOWNGRADE_DETECTED
1265L
//
// Do not use ID's 1266 - 1270 as the symbolicNames have been moved to
SEC_E_*
//
//
// MessageId: ERROR_MACHINE_LOCKED
//
// MessageText:
//
// The machine is locked and cannot be shut down without the force
option.
//
#define
ERROR_MACHINE_LOCKED
1271L
//
// MessageId: ERROR_CALLBACK_SUPPLIED_INVALID_DATA
//
// MessageText:
//
// An application-defined callback gave invalid data when called.
//
#define ERROR_CALLBACK_SUPPLIED_INVALID_DATA 1273L
//
// MessageId: ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED
//
// MessageText:
//
// The group policy framework should call the extension in the
synchronous foreground policy refresh.
//
#define ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED 1274L
//
// MessageId: ERROR_DRIVER_BLOCKED
//
// MessageText:
//
// This driver has been blocked from loading
//
#define
ERROR_DRIVER_BLOCKED
1275L
//
// MessageId: ERROR_INVALID_IMPORT_OF_NON_DLL
//
// MessageText:
//
// A dynamic link library (DLL) referenced a module that was neither a
DLL nor the process's executable image.
//
#define ERROR_INVALID_IMPORT_OF_NON_DLL 1276L
//
// MessageId: ERROR_ACCESS_DISABLED_WEBBLADE
//
// MessageText:
//
// Windows cannot open this program since it has been disabled.
//
#define ERROR_ACCESS_DISABLED_WEBBLADE 1277L
//
// MessageId: ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER
//
// MessageText:
//
// Windows cannot open this program because the license enforcement
system has been tampered with or become corrupted.
//
#define ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER 1278L
//
// MessageId: ERROR_RECOVERY_FAILURE
//
// MessageText:
//
// A transaction recover failed.
//
#define
ERROR_RECOVERY_FAILURE
1279L
//
// MessageId: ERROR_ALREADY_FIBER
//
// MessageText:
//
// The current thread has already been converted to a fiber.
//
#define
ERROR_ALREADY_FIBER
1280L
//
// MessageId: ERROR_ALREADY_THREAD
//
// MessageText:
//
// The current thread has already been converted from a fiber.
//
#define
ERROR_ALREADY_THREAD
1281L
//
// MessageId: ERROR_STACK_BUFFER_OVERRUN
//
// MessageText:
//
//
The system detected an overrun of a stack-based buffer in this
application. This overrun could potentially allow a malicious user to
gain control of this application.
//
#define
ERROR_STACK_BUFFER_OVERRUN
1282L
//
// MessageId: ERROR_PARAMETER_QUOTA_EXCEEDED
//
// MessageText:
//
// Data present in one of the parameters is more than the function can
operate on.
//
#define ERROR_PARAMETER_QUOTA_EXCEEDED 1283L
//
// MessageId: ERROR_DEBUGGER_INACTIVE
//
// MessageText:
//
// An attempt to do an operation on a debug object failed because the
object is in the process of being deleted.
//
#define
ERROR_DEBUGGER_INACTIVE
1284L
//
// MessageId: ERROR_DELAY_LOAD_FAILED
//
// MessageText:
//
// An attempt to delay-load a .dll or get a function address in a
delay-loaded .dll failed.
//
#define
ERROR_DELAY_LOAD_FAILED
1285L
//
// MessageId: ERROR_VDM_DISALLOWED
//
// MessageText:
//
//
%1 is a 16-bit application. You do not have permissions to execute
16-bit applications. Check your permissions with your system
administrator.
//
#define
ERROR_VDM_DISALLOWED
1286L
//
// MessageId: ERROR_UNIDENTIFIED_ERROR
//
// MessageText:
//
// Insufficient information exists to identify the cause of failure.
//
#define
ERROR_UNIDENTIFIED_ERROR
1287L
//
// MessageId: ERROR_INVALID_CRUNTIME_PARAMETER
//
// MessageText:
//
// The parameter passed to a C runtime function is incorrect.
//
#define ERROR_INVALID_CRUNTIME_PARAMETER 1288L
//
// MessageId: ERROR_BEYOND_VDL
//
// MessageText:
//
// The operation occurred beyond the valid data length of the file.
//
#define
ERROR_BEYOND_VDL
1289L
//
// MessageId: ERROR_INCOMPATIBLE_SERVICE_SID_TYPE
//
// MessageText:
//
//
The service start failed since one or more services in the same process
have an incompatible service SID type setting. A service with
restricted service SID type can only coexist in the same process with
other services with a restricted SID type. If the service SID type for
this service was just configured, the hosting process must be restarted
in order to start this service.
//
#define ERROR_INCOMPATIBLE_SERVICE_SID_TYPE 1290L
//
// MessageId: ERROR_DRIVER_PROCESS_TERMINATED
//
// MessageText:
//
// The process hosting the driver for this device has been terminated.
//
#define ERROR_DRIVER_PROCESS_TERMINATED 1291L
//
// MessageId: ERROR_IMPLEMENTATION_LIMIT
//
// MessageText:
//
// An operation attempted to exceed an implementation-defined limit.
//
#define
ERROR_IMPLEMENTATION_LIMIT
1292L
//
// MessageId: ERROR_PROCESS_IS_PROTECTED
//
// MessageText:
//
// Either the target process, or the target thread's containing
process, is a protected process.
//
#define
ERROR_PROCESS_IS_PROTECTED
1293L
//
// MessageId: ERROR_SERVICE_NOTIFY_CLIENT_LAGGING
//
// MessageText:
//
// The service notification client is lagging too far behind the
current state of services in the machine.
//
#define ERROR_SERVICE_NOTIFY_CLIENT_LAGGING 1294L
//
// MessageId: ERROR_DISK_QUOTA_EXCEEDED
//
// MessageText:
//
// The requested file operation failed because the storage quota was
exceeded.
//
To free up disk space, move files to a different location or delete
unnecessary files. For more information, contact your system
administrator.
//
#define
ERROR_DISK_QUOTA_EXCEEDED
1295L
//
// MessageId: ERROR_CONTENT_BLOCKED
//
// MessageText:
//
//
The requested file operation failed because the storage policy blocks
that type of file. For more information, contact your system
administrator.
//
#define
ERROR_CONTENT_BLOCKED
1296L
//
// MessageId: ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE
//
// MessageText:
//
// A privilege that the service requires to function properly does not
exist in the service account configuration.
//
You may use the Services Microsoft Management Console (MMC) snap-in
(services.msc) and the Local Security Settings MMC snap-in (secpol.msc)
to view the service configuration and the account configuration.
//
#define ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297L
//
// MessageId: ERROR_APP_HANG
//
// MessageText:
//
// A thread involved in this operation appears to be unresponsive.
//
#define
ERROR_APP_HANG
1298L
///////////////////////////////////////////////////
//
//
//
SECURITY Error
codes
//
//
//
//
1299 to
1399
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_INVALID_LABEL
//
// MessageText:
//
// Indicates a particular Security ID may not be assigned as the label
of an object.
//
#define
ERROR_INVALID_LABEL
1299L
//
// MessageId: ERROR_NOT_ALL_ASSIGNED
//
// MessageText:
//
// Not all privileges or groups referenced are assigned to the caller.
//
#define
ERROR_NOT_ALL_ASSIGNED
1300L
//
// MessageId: ERROR_SOME_NOT_MAPPED
//
// MessageText:
//
// Some mapping between account names and security IDs was not done.
//
#define
ERROR_SOME_NOT_MAPPED
1301L
//
// MessageId: ERROR_NO_QUOTAS_FOR_ACCOUNT
//
// MessageText:
//
// No system quota limits are specifically set for this account.
//
#define
ERROR_NO_QUOTAS_FOR_ACCOUNT
1302L
//
// MessageId: ERROR_LOCAL_USER_SESSION_KEY
//
// MessageText:
//
// No encryption key is available. A well-known encryption key was
returned.
//
#define
ERROR_LOCAL_USER_SESSION_KEY
1303L
//
// MessageId: ERROR_NULL_LM_PASSWORD
//
// MessageText:
//
// The password is too complex to be converted to a LAN Manager
password. The LAN Manager password returned is a NULL string.
//
#define
ERROR_NULL_LM_PASSWORD
1304L
//
// MessageId: ERROR_UNKNOWN_REVISION
//
// MessageText:
//
// The revision level is unknown.
//
#define
ERROR_UNKNOWN_REVISION
1305L
//
// MessageId: ERROR_REVISION_MISMATCH
//
// MessageText:
//
// Indicates two revision levels are incompatible.
//
#define
ERROR_REVISION_MISMATCH
1306L
//
// MessageId: ERROR_INVALID_OWNER
//
// MessageText:
//
// This security ID may not be assigned as the owner of this object.
//
#define
ERROR_INVALID_OWNER
1307L
//
// MessageId: ERROR_INVALID_PRIMARY_GROUP
//
// MessageText:
//
// This security ID may not be assigned as the primary group of an
object.
//
#define
ERROR_INVALID_PRIMARY_GROUP
1308L
//
// MessageId: ERROR_NO_IMPERSONATION_TOKEN
//
// MessageText:
//
// An attempt has been made to operate on an impersonation token by a
thread that is not currently impersonating a client.
//
#define
ERROR_NO_IMPERSONATION_TOKEN
1309L
//
// MessageId: ERROR_CANT_DISABLE_MANDATORY
//
// MessageText:
//
// The group may not be disabled.
//
#define
ERROR_CANT_DISABLE_MANDATORY
1310L
//
// MessageId: ERROR_NO_LOGON_SERVERS
//
// MessageText:
//
// There are currently no logon servers available to service the logon
request.
//
#define
ERROR_NO_LOGON_SERVERS
1311L
//
// MessageId: ERROR_NO_SUCH_LOGON_SESSION
//
// MessageText:
//
// A specified logon session does not exist. It may already have been
terminated.
//
#define
ERROR_NO_SUCH_LOGON_SESSION
1312L
//
// MessageId: ERROR_NO_SUCH_PRIVILEGE
//
// MessageText:
//
// A specified privilege does not exist.
//
#define
ERROR_NO_SUCH_PRIVILEGE
1313L
//
// MessageId: ERROR_PRIVILEGE_NOT_HELD
//
// MessageText:
//
// A required privilege is not held by the client.
//
#define
ERROR_PRIVILEGE_NOT_HELD
1314L
//
// MessageId: ERROR_INVALID_ACCOUNT_NAME
//
// MessageText:
//
// The name provided is not a properly formed account name.
//
#define
ERROR_INVALID_ACCOUNT_NAME
1315L
//
// MessageId: ERROR_USER_EXISTS
//
// MessageText:
//
// The specified account already exists.
//
#define
ERROR_USER_EXISTS
1316L
//
// MessageId: ERROR_NO_SUCH_USER
//
// MessageText:
//
// The specified account does not exist.
//
#define
ERROR_NO_SUCH_USER
1317L
//
// MessageId: ERROR_GROUP_EXISTS
//
// MessageText:
//
// The specified group already exists.
//
#define
ERROR_GROUP_EXISTS
1318L
//
// MessageId: ERROR_NO_SUCH_GROUP
//
// MessageText:
//
// The specified group does not exist.
//
#define
ERROR_NO_SUCH_GROUP
1319L
//
// MessageId: ERROR_MEMBER_IN_GROUP
//
// MessageText:
//
//
Either the specified user account is already a member of the specified
group, or the specified group cannot be deleted because it contains a
member.
//
#define
ERROR_MEMBER_IN_GROUP
1320L
//
// MessageId: ERROR_MEMBER_NOT_IN_GROUP
//
// MessageText:
//
// The specified user account is not a member of the specified group
account.
//
#define
ERROR_MEMBER_NOT_IN_GROUP
1321L
//
// MessageId: ERROR_LAST_ADMIN
//
// MessageText:
//
// The last remaining administration account cannot be disabled or
deleted.
//
#define
ERROR_LAST_ADMIN
1322L
//
// MessageId: ERROR_WRONG_PASSWORD
//
// MessageText:
//
// Unable to update the password. The value provided as the current
password is incorrect.
//
#define
ERROR_WRONG_PASSWORD
1323L
//
// MessageId: ERROR_ILL_FORMED_PASSWORD
//
// MessageText:
//
// Unable to update the password. The value provided for the new
password contains values that are not allowed in passwords.
//
#define
ERROR_ILL_FORMED_PASSWORD
1324L
//
// MessageId: ERROR_PASSWORD_RESTRICTION
//
// MessageText:
//
//
Unable to update the password. The value provided for the new password
does not meet the length, complexity, or history requirements of the
domain.
//
#define
ERROR_PASSWORD_RESTRICTION
1325L
//
// MessageId: ERROR_LOGON_FAILURE
//
// MessageText:
//
// Logon failure: unknown user name or bad password.
//
#define
ERROR_LOGON_FAILURE
1326L
//
// MessageId: ERROR_ACCOUNT_RESTRICTION
//
// MessageText:
//
//
Logon failure: user account restriction. Possible reasons are blank
passwords not allowed, logon hour restrictions, or a policy restriction
has been enforced.
//
#define
ERROR_ACCOUNT_RESTRICTION
1327L
//
// MessageId: ERROR_INVALID_LOGON_HOURS
//
// MessageText:
//
// Logon failure: account logon time restriction violation.
//
#define
ERROR_INVALID_LOGON_HOURS
1328L
//
// MessageId: ERROR_INVALID_WORKSTATION
//
// MessageText:
//
// Logon failure: user not allowed to log on to this computer.
//
#define
ERROR_INVALID_WORKSTATION
1329L
//
// MessageId: ERROR_PASSWORD_EXPIRED
//
// MessageText:
//
// Logon failure: the specified account password has expired.
//
#define
ERROR_PASSWORD_EXPIRED
1330L
//
// MessageId: ERROR_ACCOUNT_DISABLED
//
// MessageText:
//
// Logon failure: account currently disabled.
//
#define
ERROR_ACCOUNT_DISABLED
1331L
//
// MessageId: ERROR_NONE_MAPPED
//
// MessageText:
//
// No mapping between account names and security IDs was done.
//
#define
ERROR_NONE_MAPPED
1332L
//
// MessageId: ERROR_TOO_MANY_LUIDS_REQUESTED
//
// MessageText:
//
// Too many local user identifiers (LUIDs) were requested at one time.
//
#define ERROR_TOO_MANY_LUIDS_REQUESTED 1333L
//
// MessageId: ERROR_LUIDS_EXHAUSTED
//
// MessageText:
//
// No more local user identifiers (LUIDs) are available.
//
#define
ERROR_LUIDS_EXHAUSTED
1334L
//
// MessageId: ERROR_INVALID_SUB_AUTHORITY
//
// MessageText:
//
// The subauthority part of a security ID is invalid for this
particular use.
//
#define
ERROR_INVALID_SUB_AUTHORITY
1335L
//
// MessageId: ERROR_INVALID_ACL
//
// MessageText:
//
// The access control list (ACL) structure is invalid.
//
#define
ERROR_INVALID_ACL
1336L
//
// MessageId: ERROR_INVALID_SID
//
// MessageText:
//
// The security ID structure is invalid.
//
#define
ERROR_INVALID_SID
1337L
//
// MessageId: ERROR_INVALID_SECURITY_DESCR
//
// MessageText:
//
// The security descriptor structure is invalid.
//
#define
ERROR_INVALID_SECURITY_DESCR
1338L
//
// MessageId: ERROR_BAD_INHERITANCE_ACL
//
// MessageText:
//
// The inherited access control list (ACL) or access control entry
(ACE) could not be built.
//
#define
ERROR_BAD_INHERITANCE_ACL
1340L
//
// MessageId: ERROR_SERVER_DISABLED
//
// MessageText:
//
// The server is currently disabled.
//
#define
ERROR_SERVER_DISABLED
1341L
//
// MessageId: ERROR_SERVER_NOT_DISABLED
//
// MessageText:
//
// The server is currently enabled.
//
#define
ERROR_SERVER_NOT_DISABLED
1342L
//
// MessageId: ERROR_INVALID_ID_AUTHORITY
//
// MessageText:
//
// The value provided was an invalid value for an identifier authority.
//
#define
ERROR_INVALID_ID_AUTHORITY
1343L
//
// MessageId: ERROR_ALLOTTED_SPACE_EXCEEDED
//
// MessageText:
//
// No more memory is available for security information updates.
//
#define ERROR_ALLOTTED_SPACE_EXCEEDED
1344L
//
// MessageId: ERROR_INVALID_GROUP_ATTRIBUTES
//
// MessageText:
//
// The specified attributes are invalid, or incompatible with the
attributes for the group as a whole.
//
#define ERROR_INVALID_GROUP_ATTRIBUTES 1345L
//
// MessageId: ERROR_BAD_IMPERSONATION_LEVEL
//
// MessageText:
//
// Either a required impersonation level was not provided, or the
provided impersonation level is invalid.
//
#define ERROR_BAD_IMPERSONATION_LEVEL
1346L
//
// MessageId: ERROR_CANT_OPEN_ANONYMOUS
//
// MessageText:
//
// Cannot open an anonymous level security token.
//
#define
ERROR_CANT_OPEN_ANONYMOUS
1347L
//
// MessageId: ERROR_BAD_VALIDATION_CLASS
//
// MessageText:
//
// The validation information class requested was invalid.
//
#define
ERROR_BAD_VALIDATION_CLASS
1348L
//
// MessageId: ERROR_BAD_TOKEN_TYPE
//
// MessageText:
//
// The type of the token is inappropriate for its attempted use.
//
#define
ERROR_BAD_TOKEN_TYPE
1349L
//
// MessageId: ERROR_NO_SECURITY_ON_OBJECT
//
// MessageText:
//
// Unable to perform a security operation on an object that has no
associated security.
//
#define
ERROR_NO_SECURITY_ON_OBJECT
1350L
//
// MessageId: ERROR_CANT_ACCESS_DOMAIN_INFO
//
// MessageText:
//
//
Configuration information could not be read from the domain controller,
either because the machine is unavailable, or access has been denied.
//
#define ERROR_CANT_ACCESS_DOMAIN_INFO
1351L
//
// MessageId: ERROR_INVALID_SERVER_STATE
//
// MessageText:
//
//
The security account manager (SAM) or local security authority (LSA)
server was in the wrong state to perform the security operation.
//
#define
ERROR_INVALID_SERVER_STATE
1352L
//
// MessageId: ERROR_INVALID_DOMAIN_STATE
//
// MessageText:
//
// The domain was in the wrong state to perform the security operation.
//
#define
ERROR_INVALID_DOMAIN_STATE
1353L
//
// MessageId: ERROR_INVALID_DOMAIN_ROLE
//
// MessageText:
//
// This operation is only allowed for the Primary Domain Controller of
the domain.
//
#define
ERROR_INVALID_DOMAIN_ROLE
1354L
//
// MessageId: ERROR_NO_SUCH_DOMAIN
//
// MessageText:
//
// The specified domain either does not exist or could not be contacted.
//
#define
ERROR_NO_SUCH_DOMAIN
1355L
//
// MessageId: ERROR_DOMAIN_EXISTS
//
// MessageText:
//
// The specified domain already exists.
//
#define
ERROR_DOMAIN_EXISTS
1356L
//
// MessageId: ERROR_DOMAIN_LIMIT_EXCEEDED
//
// MessageText:
//
// An attempt was made to exceed the limit on the number of domains per
server.
//
#define
ERROR_DOMAIN_LIMIT_EXCEEDED
1357L
//
// MessageId: ERROR_INTERNAL_DB_CORRUPTION
//
// MessageText:
//
//
Unable to complete the requested operation because of either a
catastrophic media failure or a data structure corruption on the disk.
//
#define
ERROR_INTERNAL_DB_CORRUPTION
1358L
//
// MessageId: ERROR_INTERNAL_ERROR
//
// MessageText:
//
// An internal error occurred.
//
#define
ERROR_INTERNAL_ERROR
1359L
//
// MessageId: ERROR_GENERIC_NOT_MAPPED
//
// MessageText:
//
// Generic access types were contained in an access mask which should
already be mapped to nongeneric types.
//
#define
ERROR_GENERIC_NOT_MAPPED
1360L
//
// MessageId: ERROR_BAD_DESCRIPTOR_FORMAT
//
// MessageText:
//
// A security descriptor is not in the right format (absolute or
self-relative).
//
#define
ERROR_BAD_DESCRIPTOR_FORMAT
1361L
//
// MessageId: ERROR_NOT_LOGON_PROCESS
//
// MessageText:
//
//
The requested action is restricted for use by logon processes only. The
calling process has not registered as a logon process.
//
#define
ERROR_NOT_LOGON_PROCESS
1362L
//
// MessageId: ERROR_LOGON_SESSION_EXISTS
//
// MessageText:
//
// Cannot start a new logon session with an ID that is already in use.
//
#define
ERROR_LOGON_SESSION_EXISTS
1363L
//
// MessageId: ERROR_NO_SUCH_PACKAGE
//
// MessageText:
//
// A specified authentication package is unknown.
//
#define
ERROR_NO_SUCH_PACKAGE
1364L
//
// MessageId: ERROR_BAD_LOGON_SESSION_STATE
//
// MessageText:
//
// The logon session is not in a state that is consistent with the
requested operation.
//
#define ERROR_BAD_LOGON_SESSION_STATE
1365L
//
// MessageId: ERROR_LOGON_SESSION_COLLISION
//
// MessageText:
//
// The logon session ID is already in use.
//
#define ERROR_LOGON_SESSION_COLLISION
1366L
//
// MessageId: ERROR_INVALID_LOGON_TYPE
//
// MessageText:
//
// A logon request contained an invalid logon type value.
//
#define
ERROR_INVALID_LOGON_TYPE
1367L
//
// MessageId: ERROR_CANNOT_IMPERSONATE
//
// MessageText:
//
// Unable to impersonate using a named pipe until data has been read
from that pipe.
//
#define
ERROR_CANNOT_IMPERSONATE
1368L
//
// MessageId: ERROR_RXACT_INVALID_STATE
//
// MessageText:
//
// The transaction state of a registry subtree is incompatible with the
requested operation.
//
#define
ERROR_RXACT_INVALID_STATE
1369L
//
// MessageId: ERROR_RXACT_COMMIT_FAILURE
//
// MessageText:
//
// An internal security database corruption has been encountered.
//
#define
ERROR_RXACT_COMMIT_FAILURE
1370L
//
// MessageId: ERROR_SPECIAL_ACCOUNT
//
// MessageText:
//
// Cannot perform this operation on built-in accounts.
//
#define
ERROR_SPECIAL_ACCOUNT
1371L
//
// MessageId: ERROR_SPECIAL_GROUP
//
// MessageText:
//
// Cannot perform this operation on this built-in special group.
//
#define
ERROR_SPECIAL_GROUP
1372L
//
// MessageId: ERROR_SPECIAL_USER
//
// MessageText:
//
// Cannot perform this operation on this built-in special user.
//
#define
ERROR_SPECIAL_USER
1373L
//
// MessageId: ERROR_MEMBERS_PRIMARY_GROUP
//
// MessageText:
//
// The user cannot be removed from a group because the group is
currently the user's primary group.
//
#define
ERROR_MEMBERS_PRIMARY_GROUP
1374L
//
// MessageId: ERROR_TOKEN_ALREADY_IN_USE
//
// MessageText:
//
// The token is already in use as a primary token.
//
#define
ERROR_TOKEN_ALREADY_IN_USE
1375L
//
// MessageId: ERROR_NO_SUCH_ALIAS
//
// MessageText:
//
// The specified local group does not exist.
//
#define
ERROR_NO_SUCH_ALIAS
1376L
//
// MessageId: ERROR_MEMBER_NOT_IN_ALIAS
//
// MessageText:
//
// The specified account name is not a member of the group.
//
#define
ERROR_MEMBER_NOT_IN_ALIAS
1377L
//
// MessageId: ERROR_MEMBER_IN_ALIAS
//
// MessageText:
//
// The specified account name is already a member of the group.
//
#define
ERROR_MEMBER_IN_ALIAS
1378L
//
// MessageId: ERROR_ALIAS_EXISTS
//
// MessageText:
//
// The specified local group already exists.
//
#define
ERROR_ALIAS_EXISTS
1379L
//
// MessageId: ERROR_LOGON_NOT_GRANTED
//
// MessageText:
//
// Logon failure: the user has not been granted the requested logon
type at this computer.
//
#define
ERROR_LOGON_NOT_GRANTED
1380L
//
// MessageId: ERROR_TOO_MANY_SECRETS
//
// MessageText:
//
// The maximum number of secrets that may be stored in a single system
has been exceeded.
//
#define
ERROR_TOO_MANY_SECRETS
1381L
//
// MessageId: ERROR_SECRET_TOO_LONG
//
// MessageText:
//
// The length of a secret exceeds the maximum length allowed.
//
#define
ERROR_SECRET_TOO_LONG
1382L
//
// MessageId: ERROR_INTERNAL_DB_ERROR
//
// MessageText:
//
// The local security authority database contains an internal
inconsistency.
//
#define
ERROR_INTERNAL_DB_ERROR
1383L
//
// MessageId: ERROR_TOO_MANY_CONTEXT_IDS
//
// MessageText:
//
// During a logon attempt, the user's security context accumulated too
many security IDs.
//
#define
ERROR_TOO_MANY_CONTEXT_IDS
1384L
//
// MessageId: ERROR_LOGON_TYPE_NOT_GRANTED
//
// MessageText:
//
// Logon failure: the user has not been granted the requested logon
type at this computer.
//
#define
ERROR_LOGON_TYPE_NOT_GRANTED
1385L
//
// MessageId: ERROR_NT_CROSS_ENCRYPTION_REQUIRED
//
// MessageText:
//
// A cross-encrypted password is necessary to change a user password.
//
#define ERROR_NT_CROSS_ENCRYPTION_REQUIRED 1386L
//
// MessageId: ERROR_NO_SUCH_MEMBER
//
// MessageText:
//
// A member could not be added to or removed from the local group
because the member does not exist.
//
#define
ERROR_NO_SUCH_MEMBER
1387L
//
// MessageId: ERROR_INVALID_MEMBER
//
// MessageText:
//
// A new member could not be added to a local group because the member
has the wrong account type.
//
#define
ERROR_INVALID_MEMBER
1388L
//
// MessageId: ERROR_TOO_MANY_SIDS
//
// MessageText:
//
// Too many security IDs have been specified.
//
#define
ERROR_TOO_MANY_SIDS
1389L
//
// MessageId: ERROR_LM_CROSS_ENCRYPTION_REQUIRED
//
// MessageText:
//
// A cross-encrypted password is necessary to change this user password.
//
#define ERROR_LM_CROSS_ENCRYPTION_REQUIRED 1390L
//
// MessageId: ERROR_NO_INHERITANCE
//
// MessageText:
//
// Indicates an ACL contains no inheritable components.
//
#define
ERROR_NO_INHERITANCE
1391L
//
// MessageId: ERROR_FILE_CORRUPT
//
// MessageText:
//
// The file or directory is corrupted and unreadable.
//
#define
ERROR_FILE_CORRUPT
1392L
//
// MessageId: ERROR_DISK_CORRUPT
//
// MessageText:
//
// The disk structure is corrupted and unreadable.
//
#define
ERROR_DISK_CORRUPT
1393L
//
// MessageId: ERROR_NO_USER_SESSION_KEY
//
// MessageText:
//
// There is no user session key for the specified logon session.
//
#define
ERROR_NO_USER_SESSION_KEY
1394L
//
// MessageId: ERROR_LICENSE_QUOTA_EXCEEDED
//
// MessageText:
//
//
The service being accessed is licensed for a particular number of
connections. No more connections can be made to the service at this
time because there are already as many connections as the service can
accept.
//
#define
ERROR_LICENSE_QUOTA_EXCEEDED
1395L
//
// MessageId: ERROR_WRONG_TARGET_NAME
//
// MessageText:
//
// Logon Failure: The target account name is incorrect.
//
#define
ERROR_WRONG_TARGET_NAME
1396L
//
// MessageId: ERROR_MUTUAL_AUTH_FAILED
//
// MessageText:
//
// Mutual Authentication failed. The server's password is out of date
at the domain controller.
//
#define
ERROR_MUTUAL_AUTH_FAILED
1397L
//
// MessageId: ERROR_TIME_SKEW
//
// MessageText:
//
// There is a time and/or date difference between the client and server.
//
#define
ERROR_TIME_SKEW
1398L
//
// MessageId: ERROR_CURRENT_DOMAIN_NOT_ALLOWED
//
// MessageText:
//
// This operation cannot be performed on the current domain.
//
#define ERROR_CURRENT_DOMAIN_NOT_ALLOWED 1399L
///////////////////////////////////////////////////
//
//
//
WinUser Error
codes
//
//
//
//
1400 to
1499
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_INVALID_WINDOW_HANDLE
//
// MessageText:
//
// Invalid window handle.
//
#define
ERROR_INVALID_WINDOW_HANDLE
1400L
//
// MessageId: ERROR_INVALID_MENU_HANDLE
//
// MessageText:
//
// Invalid menu handle.
//
#define
ERROR_INVALID_MENU_HANDLE
1401L
//
// MessageId: ERROR_INVALID_CURSOR_HANDLE
//
// MessageText:
//
// Invalid cursor handle.
//
#define
ERROR_INVALID_CURSOR_HANDLE
1402L
//
// MessageId: ERROR_INVALID_ACCEL_HANDLE
//
// MessageText:
//
// Invalid accelerator table handle.
//
#define
ERROR_INVALID_ACCEL_HANDLE
1403L
//
// MessageId: ERROR_INVALID_HOOK_HANDLE
//
// MessageText:
//
// Invalid hook handle.
//
#define
ERROR_INVALID_HOOK_HANDLE
1404L
//
// MessageId: ERROR_INVALID_DWP_HANDLE
//
// MessageText:
//
// Invalid handle to a multiple-window position structure.
//
#define
ERROR_INVALID_DWP_HANDLE
1405L
//
// MessageId: ERROR_TLW_WITH_WSCHILD
//
// MessageText:
//
// Cannot create a top-level child window.
//
#define
ERROR_TLW_WITH_WSCHILD
1406L
//
// MessageId: ERROR_CANNOT_FIND_WND_CLASS
//
// MessageText:
//
// Cannot find window class.
//
#define
ERROR_CANNOT_FIND_WND_CLASS
1407L
//
// MessageId: ERROR_WINDOW_OF_OTHER_THREAD
//
// MessageText:
//
// Invalid window; it belongs to other thread.
//
#define
ERROR_WINDOW_OF_OTHER_THREAD
1408L
//
// MessageId: ERROR_HOTKEY_ALREADY_REGISTERED
//
// MessageText:
//
// Hot key is already registered.
//
#define ERROR_HOTKEY_ALREADY_REGISTERED 1409L
//
// MessageId: ERROR_CLASS_ALREADY_EXISTS
//
// MessageText:
//
// Class already exists.
//
#define
ERROR_CLASS_ALREADY_EXISTS
1410L
//
// MessageId: ERROR_CLASS_DOES_NOT_EXIST
//
// MessageText:
//
// Class does not exist.
//
#define
ERROR_CLASS_DOES_NOT_EXIST
1411L
//
// MessageId: ERROR_CLASS_HAS_WINDOWS
//
// MessageText:
//
// Class still has open windows.
//
#define
ERROR_CLASS_HAS_WINDOWS
1412L
//
// MessageId: ERROR_INVALID_INDEX
//
// MessageText:
//
// Invalid index.
//
#define
ERROR_INVALID_INDEX
1413L
//
// MessageId: ERROR_INVALID_ICON_HANDLE
//
// MessageText:
//
// Invalid icon handle.
//
#define
ERROR_INVALID_ICON_HANDLE
1414L
//
// MessageId: ERROR_PRIVATE_DIALOG_INDEX
//
// MessageText:
//
// Using private DIALOG window words.
//
#define
ERROR_PRIVATE_DIALOG_INDEX
1415L
//
// MessageId: ERROR_LISTBOX_ID_NOT_FOUND
//
// MessageText:
//
// The list box identifier was not found.
//
#define
ERROR_LISTBOX_ID_NOT_FOUND
1416L
//
// MessageId: ERROR_NO_WILDCARD_CHARACTERS
//
// MessageText:
//
// No wildcards were found.
//
#define
ERROR_NO_WILDCARD_CHARACTERS
1417L
//
// MessageId: ERROR_CLIPBOARD_NOT_OPEN
//
// MessageText:
//
// Thread does not have a clipboard open.
//
#define
ERROR_CLIPBOARD_NOT_OPEN
1418L
//
// MessageId: ERROR_HOTKEY_NOT_REGISTERED
//
// MessageText:
//
// Hot key is not registered.
//
#define
ERROR_HOTKEY_NOT_REGISTERED
1419L
//
// MessageId: ERROR_WINDOW_NOT_DIALOG
//
// MessageText:
//
// The window is not a valid dialog window.
//
#define
ERROR_WINDOW_NOT_DIALOG
1420L
//
// MessageId: ERROR_CONTROL_ID_NOT_FOUND
//
// MessageText:
//
// Control ID not found.
//
#define
ERROR_CONTROL_ID_NOT_FOUND
1421L
//
// MessageId: ERROR_INVALID_COMBOBOX_MESSAGE
//
// MessageText:
//
// Invalid message for a combo box because it does not have an edit
control.
//
#define ERROR_INVALID_COMBOBOX_MESSAGE 1422L
//
// MessageId: ERROR_WINDOW_NOT_COMBOBOX
//
// MessageText:
//
// The window is not a combo box.
//
#define
ERROR_WINDOW_NOT_COMBOBOX
1423L
//
// MessageId: ERROR_INVALID_EDIT_HEIGHT
//
// MessageText:
//
// Height must be less than 256.
//
#define
ERROR_INVALID_EDIT_HEIGHT
1424L
//
// MessageId: ERROR_DC_NOT_FOUND
//
// MessageText:
//
// Invalid device context (DC) handle.
//
#define
ERROR_DC_NOT_FOUND
1425L
//
// MessageId: ERROR_INVALID_HOOK_FILTER
//
// MessageText:
//
// Invalid hook procedure type.
//
#define
ERROR_INVALID_HOOK_FILTER
1426L
//
// MessageId: ERROR_INVALID_FILTER_PROC
//
// MessageText:
//
// Invalid hook procedure.
//
#define
ERROR_INVALID_FILTER_PROC
1427L
//
// MessageId: ERROR_HOOK_NEEDS_HMOD
//
// MessageText:
//
// Cannot set nonlocal hook without a module handle.
//
#define
ERROR_HOOK_NEEDS_HMOD
1428L
//
// MessageId: ERROR_GLOBAL_ONLY_HOOK
//
// MessageText:
//
// This hook procedure can only be set globally.
//
#define
ERROR_GLOBAL_ONLY_HOOK
1429L
//
// MessageId: ERROR_JOURNAL_HOOK_SET
//
// MessageText:
//
// The journal hook procedure is already installed.
//
#define
ERROR_JOURNAL_HOOK_SET
1430L
//
// MessageId: ERROR_HOOK_NOT_INSTALLED
//
// MessageText:
//
// The hook procedure is not installed.
//
#define
ERROR_HOOK_NOT_INSTALLED
1431L
//
// MessageId: ERROR_INVALID_LB_MESSAGE
//
// MessageText:
//
// Invalid message for single-selection list box.
//
#define
ERROR_INVALID_LB_MESSAGE
1432L
//
// MessageId: ERROR_SETCOUNT_ON_BAD_LB
//
// MessageText:
//
// LB_SETCOUNT sent to non-lazy list box.
//
#define
ERROR_SETCOUNT_ON_BAD_LB
1433L
//
// MessageId: ERROR_LB_WITHOUT_TABSTOPS
//
// MessageText:
//
// This list box does not support tab stops.
//
#define
ERROR_LB_WITHOUT_TABSTOPS
1434L
//
// MessageId: ERROR_DESTROY_OBJECT_OF_OTHER_THREAD
//
// MessageText:
//
// Cannot destroy object created by another thread.
//
#define ERROR_DESTROY_OBJECT_OF_OTHER_THREAD 1435L
//
// MessageId: ERROR_CHILD_WINDOW_MENU
//
// MessageText:
//
// Child windows cannot have menus.
//
#define
ERROR_CHILD_WINDOW_MENU
1436L
//
// MessageId: ERROR_NO_SYSTEM_MENU
//
// MessageText:
//
// The window does not have a system menu.
//
#define
ERROR_NO_SYSTEM_MENU
1437L
//
// MessageId: ERROR_INVALID_MSGBOX_STYLE
//
// MessageText:
//
// Invalid message box style.
//
#define
ERROR_INVALID_MSGBOX_STYLE
1438L
//
// MessageId: ERROR_INVALID_SPI_VALUE
//
// MessageText:
//
// Invalid system-wide (SPI_*) parameter.
//
#define
ERROR_INVALID_SPI_VALUE
1439L
//
// MessageId: ERROR_SCREEN_ALREADY_LOCKED
//
// MessageText:
//
// Screen already locked.
//
#define
ERROR_SCREEN_ALREADY_LOCKED
1440L
//
// MessageId: ERROR_HWNDS_HAVE_DIFF_PARENT
//
// MessageText:
//
// All handles to windows in a multiple-window position structure must
have the same parent.
//
#define
ERROR_HWNDS_HAVE_DIFF_PARENT
1441L
//
// MessageId: ERROR_NOT_CHILD_WINDOW
//
// MessageText:
//
// The window is not a child window.
//
#define
ERROR_NOT_CHILD_WINDOW
1442L
//
// MessageId: ERROR_INVALID_GW_COMMAND
//
// MessageText:
//
// Invalid GW_* command.
//
#define
ERROR_INVALID_GW_COMMAND
1443L
//
// MessageId: ERROR_INVALID_THREAD_ID
//
// MessageText:
//
// Invalid thread identifier.
//
#define
ERROR_INVALID_THREAD_ID
1444L
//
// MessageId: ERROR_NON_MDICHILD_WINDOW
//
// MessageText:
//
// Cannot process a message from a window that is not a multiple
document interface (MDI) window.
//
#define
ERROR_NON_MDICHILD_WINDOW
1445L
//
// MessageId: ERROR_POPUP_ALREADY_ACTIVE
//
// MessageText:
//
// Popup menu already active.
//
#define
ERROR_POPUP_ALREADY_ACTIVE
1446L
//
// MessageId: ERROR_NO_SCROLLBARS
//
// MessageText:
//
// The window does not have scroll bars.
//
#define
ERROR_NO_SCROLLBARS
1447L
//
// MessageId: ERROR_INVALID_SCROLLBAR_RANGE
//
// MessageText:
//
// Scroll bar range cannot be greater than MAXLONG.
//
#define ERROR_INVALID_SCROLLBAR_RANGE
1448L
//
// MessageId: ERROR_INVALID_SHOWWIN_COMMAND
//
// MessageText:
//
// Cannot show or remove the window in the way specified.
//
#define ERROR_INVALID_SHOWWIN_COMMAND
1449L
//
// MessageId: ERROR_NO_SYSTEM_RESOURCES
//
// MessageText:
//
// Insufficient system resources exist to complete the requested
service.
//
#define
ERROR_NO_SYSTEM_RESOURCES
1450L
//
// MessageId: ERROR_NONPAGED_SYSTEM_RESOURCES
//
// MessageText:
//
// Insufficient system resources exist to complete the requested
service.
//
#define ERROR_NONPAGED_SYSTEM_RESOURCES 1451L
//
// MessageId: ERROR_PAGED_SYSTEM_RESOURCES
//
// MessageText:
//
// Insufficient system resources exist to complete the requested
service.
//
#define
ERROR_PAGED_SYSTEM_RESOURCES
1452L
//
// MessageId: ERROR_WORKING_SET_QUOTA
//
// MessageText:
//
// Insufficient quota to complete the requested service.
//
#define
ERROR_WORKING_SET_QUOTA
1453L
//
// MessageId: ERROR_PAGEFILE_QUOTA
//
// MessageText:
//
// Insufficient quota to complete the requested service.
//
#define
ERROR_PAGEFILE_QUOTA
1454L
//
// MessageId: ERROR_COMMITMENT_LIMIT
//
// MessageText:
//
// The paging file is too small for this operation to complete.
//
#define
ERROR_COMMITMENT_LIMIT
1455L
//
// MessageId: ERROR_MENU_ITEM_NOT_FOUND
//
// MessageText:
//
// A menu item was not found.
//
#define
ERROR_MENU_ITEM_NOT_FOUND
1456L
//
// MessageId: ERROR_INVALID_KEYBOARD_HANDLE
//
// MessageText:
//
// Invalid keyboard layout handle.
//
#define ERROR_INVALID_KEYBOARD_HANDLE
1457L
//
// MessageId: ERROR_HOOK_TYPE_NOT_ALLOWED
//
// MessageText:
//
// Hook type not allowed.
//
#define
ERROR_HOOK_TYPE_NOT_ALLOWED
1458L
//
// MessageId: ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION
//
// MessageText:
//
// This operation requires an interactive window station.
//
#define ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION 1459L
//
// MessageId: ERROR_TIMEOUT
//
// MessageText:
//
// This operation returned because the timeout period expired.
//
#define
ERROR_TIMEOUT
1460L
//
// MessageId: ERROR_INVALID_MONITOR_HANDLE
//
// MessageText:
//
// Invalid monitor handle.
//
#define
ERROR_INVALID_MONITOR_HANDLE
1461L
//
// MessageId: ERROR_INCORRECT_SIZE
//
// MessageText:
//
// Incorrect size argument.
//
#define
ERROR_INCORRECT_SIZE
1462L
//
// MessageId: ERROR_SYMLINK_CLASS_DISABLED
//
// MessageText:
//
// The symbolic link cannot be followed because its type is disabled.
//
#define
ERROR_SYMLINK_CLASS_DISABLED
1463L
//
// MessageId: ERROR_SYMLINK_NOT_SUPPORTED
//
// MessageText:
//
// This application does not support the current operation on symbolic
links.
//
#define
ERROR_SYMLINK_NOT_SUPPORTED
1464L
//
// MessageId: ERROR_XML_PARSE_ERROR
//
// MessageText:
//
// Windows was unable to parse the requested XML data.
//
#define
ERROR_XML_PARSE_ERROR
1465L
//
// MessageId: ERROR_XMLDSIG_ERROR
//
// MessageText:
//
// An error was encountered while processing an XML digital signature.
//
#define
ERROR_XMLDSIG_ERROR
1466L
//
// MessageId: ERROR_RESTART_APPLICATION
//
// MessageText:
//
// This application must be restarted.
//
#define
ERROR_RESTART_APPLICATION
1467L
//
// MessageId: ERROR_WRONG_COMPARTMENT
//
// MessageText:
//
// The caller made the connection request in the wrong routing
compartment.
//
#define
ERROR_WRONG_COMPARTMENT
1468L
//
// MessageId: ERROR_AUTHIP_FAILURE
//
// MessageText:
//
// There was an AuthIP failure when attempting to connect to the remote
host.
//
#define
ERROR_AUTHIP_FAILURE
1469L
//
// MessageId: ERROR_NO_NVRAM_RESOURCES
//
// MessageText:
//
// Insufficient NVRAM resources exist to complete the requested
service. A reboot might be required.
//
#define
ERROR_NO_NVRAM_RESOURCES
1470L
///////////////////////////////////////////////////
//
//
//
EventLog Error
codes
//
//
//
//
1500 to
1549
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_EVENTLOG_FILE_CORRUPT
//
// MessageText:
//
// The event log file is corrupted.
//
#define
ERROR_EVENTLOG_FILE_CORRUPT
1500L
//
// MessageId: ERROR_EVENTLOG_CANT_START
//
// MessageText:
//
// No event log file could be opened, so the event logging service did
not start.
//
#define
ERROR_EVENTLOG_CANT_START
1501L
//
// MessageId: ERROR_LOG_FILE_FULL
//
// MessageText:
//
// The event log file is full.
//
#define
ERROR_LOG_FILE_FULL
1502L
//
// MessageId: ERROR_EVENTLOG_FILE_CHANGED
//
// MessageText:
//
// The event log file has changed between read operations.
//
#define
ERROR_EVENTLOG_FILE_CHANGED
1503L
///////////////////////////////////////////////////
//
//
//
Class Scheduler Error
codes
//
//
//
//
1550 to
1599
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_INVALID_TASK_NAME
//
// MessageText:
//
// The specified task name is invalid.
//
#define
ERROR_INVALID_TASK_NAME
1550L
//
// MessageId: ERROR_INVALID_TASK_INDEX
//
// MessageText:
//
// The specified task index is invalid.
//
#define
ERROR_INVALID_TASK_INDEX
1551L
//
// MessageId: ERROR_THREAD_ALREADY_IN_TASK
//
// MessageText:
//
// The specified thread is already joining a task.
//
#define
ERROR_THREAD_ALREADY_IN_TASK
1552L
///////////////////////////////////////////////////
//
//
//
MSI Error
codes
//
//
//
//
1600 to
1699
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_INSTALL_SERVICE_FAILURE
//
// MessageText:
//
//
The Windows Installer Service could not be accessed. This can occur if
the Windows Installer is not correctly installed. Contact your support
personnel for assistance.
//
#define ERROR_INSTALL_SERVICE_FAILURE
1601L
//
// MessageId: ERROR_INSTALL_USEREXIT
//
// MessageText:
//
// User cancelled installation.
//
#define
ERROR_INSTALL_USEREXIT
1602L
//
// MessageId: ERROR_INSTALL_FAILURE
//
// MessageText:
//
// Fatal error during installation.
//
#define
ERROR_INSTALL_FAILURE
1603L
//
// MessageId: ERROR_INSTALL_SUSPEND
//
// MessageText:
//
// Installation suspended, incomplete.
//
#define
ERROR_INSTALL_SUSPEND
1604L
//
// MessageId: ERROR_UNKNOWN_PRODUCT
//
// MessageText:
//
// This action is only valid for products that are currently installed.
//
#define
ERROR_UNKNOWN_PRODUCT
1605L
//
// MessageId: ERROR_UNKNOWN_FEATURE
//
// MessageText:
//
// Feature ID not registered.
//
#define
ERROR_UNKNOWN_FEATURE
1606L
//
// MessageId: ERROR_UNKNOWN_COMPONENT
//
// MessageText:
//
// Component ID not registered.
//
#define
ERROR_UNKNOWN_COMPONENT
1607L
//
// MessageId: ERROR_UNKNOWN_PROPERTY
//
// MessageText:
//
// Unknown property.
//
#define
ERROR_UNKNOWN_PROPERTY
1608L
//
// MessageId: ERROR_INVALID_HANDLE_STATE
//
// MessageText:
//
// Handle is in an invalid state.
//
#define
ERROR_INVALID_HANDLE_STATE
1609L
//
// MessageId: ERROR_BAD_CONFIGURATION
//
// MessageText:
//
// The configuration data for this product is corrupt. Contact your
support personnel.
//
#define
ERROR_BAD_CONFIGURATION
1610L
//
// MessageId: ERROR_INDEX_ABSENT
//
// MessageText:
//
// Component qualifier not present.
//
#define
ERROR_INDEX_ABSENT
1611L
//
// MessageId: ERROR_INSTALL_SOURCE_ABSENT
//
// MessageText:
//
// The installation source for this product is not available. Verify
that the source exists and that you can access it.
//
#define
ERROR_INSTALL_SOURCE_ABSENT
1612L
//
// MessageId: ERROR_INSTALL_PACKAGE_VERSION
//
// MessageText:
//
//
This installation package cannot be installed by the Windows Installer
service. You must install a Windows service pack that contains a newer
version of the Windows Installer service.
//
#define ERROR_INSTALL_PACKAGE_VERSION
1613L
//
// MessageId: ERROR_PRODUCT_UNINSTALLED
//
// MessageText:
//
// Product is uninstalled.
//
#define
ERROR_PRODUCT_UNINSTALLED
1614L
//
// MessageId: ERROR_BAD_QUERY_SYNTAX
//
// MessageText:
//
// SQL query syntax invalid or unsupported.
//
#define
ERROR_BAD_QUERY_SYNTAX
1615L
//
// MessageId: ERROR_INVALID_FIELD
//
// MessageText:
//
// Record field does not exist.
//
#define
ERROR_INVALID_FIELD
1616L
//
// MessageId: ERROR_DEVICE_REMOVED
//
// MessageText:
//
// The device has been removed.
//
#define
ERROR_DEVICE_REMOVED
1617L
//
// MessageId: ERROR_INSTALL_ALREADY_RUNNING
//
// MessageText:
//
// Another installation is already in progress. Complete that
installation before proceeding with this install.
//
#define ERROR_INSTALL_ALREADY_RUNNING
1618L
//
// MessageId: ERROR_INSTALL_PACKAGE_OPEN_FAILED
//
// MessageText:
//
//
This installation package could not be opened. Verify that the package
exists and that you can access it, or contact the application vendor to
verify that this is a valid Windows Installer package.
//
#define ERROR_INSTALL_PACKAGE_OPEN_FAILED 1619L
//
// MessageId: ERROR_INSTALL_PACKAGE_INVALID
//
// MessageText:
//
//
This installation package could not be opened. Contact the application
vendor to verify that this is a valid Windows Installer package.
//
#define ERROR_INSTALL_PACKAGE_INVALID
1620L
//
// MessageId: ERROR_INSTALL_UI_FAILURE
//
// MessageText:
//
// There was an error starting the Windows Installer service user
interface. Contact your support personnel.
//
#define
ERROR_INSTALL_UI_FAILURE
1621L
//
// MessageId: ERROR_INSTALL_LOG_FAILURE
//
// MessageText:
//
// Error opening installation log file. Verify that the specified log
file location exists and that you can write to it.
//
#define
ERROR_INSTALL_LOG_FAILURE
1622L
//
// MessageId: ERROR_INSTALL_LANGUAGE_UNSUPPORTED
//
// MessageText:
//
// The language of this installation package is not supported by your
system.
//
#define ERROR_INSTALL_LANGUAGE_UNSUPPORTED 1623L
//
// MessageId: ERROR_INSTALL_TRANSFORM_FAILURE
//
// MessageText:
//
// Error applying transforms. Verify that the specified transform paths
are valid.
//
#define ERROR_INSTALL_TRANSFORM_FAILURE 1624L
//
// MessageId: ERROR_INSTALL_PACKAGE_REJECTED
//
// MessageText:
//
// This installation is forbidden by system policy. Contact your system
administrator.
//
#define ERROR_INSTALL_PACKAGE_REJECTED 1625L
//
// MessageId: ERROR_FUNCTION_NOT_CALLED
//
// MessageText:
//
// Function could not be executed.
//
#define
ERROR_FUNCTION_NOT_CALLED
1626L
//
// MessageId: ERROR_FUNCTION_FAILED
//
// MessageText:
//
// Function failed during execution.
//
#define
ERROR_FUNCTION_FAILED
1627L
//
// MessageId: ERROR_INVALID_TABLE
//
// MessageText:
//
// Invalid or unknown table specified.
//
#define
ERROR_INVALID_TABLE
1628L
//
// MessageId: ERROR_DATATYPE_MISMATCH
//
// MessageText:
//
// Data supplied is of wrong type.
//
#define
ERROR_DATATYPE_MISMATCH
1629L
//
// MessageId: ERROR_UNSUPPORTED_TYPE
//
// MessageText:
//
// Data of this type is not supported.
//
#define
ERROR_UNSUPPORTED_TYPE
1630L
//
// MessageId: ERROR_CREATE_FAILED
//
// MessageText:
//
// The Windows Installer service failed to start. Contact your support
personnel.
//
#define
ERROR_CREATE_FAILED
1631L
//
// MessageId: ERROR_INSTALL_TEMP_UNWRITABLE
//
// MessageText:
//
//
The Temp folder is on a drive that is full or is inaccessible. Free up
space on the drive or verify that you have write permission on the Temp
folder.
//
#define ERROR_INSTALL_TEMP_UNWRITABLE
1632L
//
// MessageId: ERROR_INSTALL_PLATFORM_UNSUPPORTED
//
// MessageText:
//
// This installation package is not supported by this processor type.
Contact your product vendor.
//
#define ERROR_INSTALL_PLATFORM_UNSUPPORTED 1633L
//
// MessageId: ERROR_INSTALL_NOTUSED
//
// MessageText:
//
// Component not used on this computer.
//
#define
ERROR_INSTALL_NOTUSED
1634L
//
// MessageId: ERROR_PATCH_PACKAGE_OPEN_FAILED
//
// MessageText:
//
//
This update package could not be opened. Verify that the update package
exists and that you can access it, or contact the application vendor to
verify that this is a valid Windows Installer update package.
//
#define ERROR_PATCH_PACKAGE_OPEN_FAILED 1635L
//
// MessageId: ERROR_PATCH_PACKAGE_INVALID
//
// MessageText:
//
//
This update package could not be opened. Contact the application vendor
to verify that this is a valid Windows Installer update package.
//
#define
ERROR_PATCH_PACKAGE_INVALID
1636L
//
// MessageId: ERROR_PATCH_PACKAGE_UNSUPPORTED
//
// MessageText:
//
//
This update package cannot be processed by the Windows Installer
service. You must install a Windows service pack that contains a newer
version of the Windows Installer service.
//
#define ERROR_PATCH_PACKAGE_UNSUPPORTED 1637L
//
// MessageId: ERROR_PRODUCT_VERSION
//
// MessageText:
//
//
Another version of this product is already installed. Installation of
this version cannot continue. To configure or remove the existing
version of this product, use Add/Remove Programs on the Control Panel.
//
#define
ERROR_PRODUCT_VERSION
1638L
//
// MessageId: ERROR_INVALID_COMMAND_LINE
//
// MessageText:
//
// Invalid command line argument. Consult the Windows Installer SDK for
detailed command line help.
//
#define
ERROR_INVALID_COMMAND_LINE
1639L
//
// MessageId: ERROR_INSTALL_REMOTE_DISALLOWED
//
// MessageText:
//
//
Only administrators have permission to add, remove, or configure server
software during a Terminal services remote session. If you want to
install or configure software on the server, contact your network
administrator.
//
#define ERROR_INSTALL_REMOTE_DISALLOWED 1640L
//
// MessageId: ERROR_SUCCESS_REBOOT_INITIATED
//
// MessageText:
//
// The requested operation completed successfully. The system will be
restarted so the changes can take effect.
//
#define ERROR_SUCCESS_REBOOT_INITIATED 1641L
//
// MessageId: ERROR_PATCH_TARGET_NOT_FOUND
//
// MessageText:
//
//
The upgrade cannot be installed by the Windows Installer service
because the program to be upgraded may be missing, or the upgrade may
update a different version of the program. Verify that the program to
be upgraded exists on your computer and that you have the correct
upgrade.
//
#define
ERROR_PATCH_TARGET_NOT_FOUND
1642L
//
// MessageId: ERROR_PATCH_PACKAGE_REJECTED
//
// MessageText:
//
// The update package is not permitted by software restriction policy.
//
#define
ERROR_PATCH_PACKAGE_REJECTED
1643L
//
// MessageId: ERROR_INSTALL_TRANSFORM_REJECTED
//
// MessageText:
//
// One or more customizations are not permitted by software restriction
policy.
//
#define ERROR_INSTALL_TRANSFORM_REJECTED 1644L
//
// MessageId: ERROR_INSTALL_REMOTE_PROHIBITED
//
// MessageText:
//
// The Windows Installer does not permit installation from a Remote
Desktop Connection.
//
#define ERROR_INSTALL_REMOTE_PROHIBITED 1645L
//
// MessageId: ERROR_PATCH_REMOVAL_UNSUPPORTED
//
// MessageText:
//
// Uninstallation of the update package is not supported.
//
#define ERROR_PATCH_REMOVAL_UNSUPPORTED 1646L
//
// MessageId: ERROR_UNKNOWN_PATCH
//
// MessageText:
//
// The update is not applied to this product.
//
#define
ERROR_UNKNOWN_PATCH
1647L
//
// MessageId: ERROR_PATCH_NO_SEQUENCE
//
// MessageText:
//
// No valid sequence could be found for the set of updates.
//
#define
ERROR_PATCH_NO_SEQUENCE
1648L
//
// MessageId: ERROR_PATCH_REMOVAL_DISALLOWED
//
// MessageText:
//
// Update removal was disallowed by policy.
//
#define ERROR_PATCH_REMOVAL_DISALLOWED 1649L
//
// MessageId: ERROR_INVALID_PATCH_XML
//
// MessageText:
//
// The XML update data is invalid.
//
#define
ERROR_INVALID_PATCH_XML
1650L
//
// MessageId: ERROR_PATCH_MANAGED_ADVERTISED_PRODUCT
//
// MessageText:
//
//
Windows Installer does not permit updating of managed advertised
products. At least one feature of the product must be installed before
applying the update.
//
#define ERROR_PATCH_MANAGED_ADVERTISED_PRODUCT 1651L
//
// MessageId: ERROR_INSTALL_SERVICE_SAFEBOOT
//
// MessageText:
//
//
The Windows Installer service is not accessible in Safe Mode. Please
try again when your computer is not in Safe Mode or you can use System
Restore to return your machine to a previous good state.
//
#define ERROR_INSTALL_SERVICE_SAFEBOOT 1652L
//
// MessageId: ERROR_FAIL_FAST_EXCEPTION
//
// MessageText:
//
// A fail fast exception occurred. Exception handlers will not be
invoked and the process will be terminated immediately.
//
#define
ERROR_FAIL_FAST_EXCEPTION
1653L
///////////////////////////////////////////////////
//
//
//
RPC Error
codes
//
//
//
//
1700 to
1999
//
///////////////////////////////////////////////////
//
// MessageId: RPC_S_INVALID_STRING_BINDING
//
// MessageText:
//
// The string binding is invalid.
//
#define
RPC_S_INVALID_STRING_BINDING
1700L
//
// MessageId: RPC_S_WRONG_KIND_OF_BINDING
//
// MessageText:
//
// The binding handle is not the correct type.
//
#define
RPC_S_WRONG_KIND_OF_BINDING
1701L
//
// MessageId: RPC_S_INVALID_BINDING
//
// MessageText:
//
// The binding handle is invalid.
//
#define
RPC_S_INVALID_BINDING
1702L
//
// MessageId: RPC_S_PROTSEQ_NOT_SUPPORTED
//
// MessageText:
//
// The RPC protocol sequence is not supported.
//
#define
RPC_S_PROTSEQ_NOT_SUPPORTED
1703L
//
// MessageId: RPC_S_INVALID_RPC_PROTSEQ
//
// MessageText:
//
// The RPC protocol sequence is invalid.
//
#define
RPC_S_INVALID_RPC_PROTSEQ
1704L
//
// MessageId: RPC_S_INVALID_STRING_UUID
//
// MessageText:
//
// The string universal unique identifier (UUID) is invalid.
//
#define
RPC_S_INVALID_STRING_UUID
1705L
//
// MessageId: RPC_S_INVALID_ENDPOINT_FORMAT
//
// MessageText:
//
// The endpoint format is invalid.
//
#define RPC_S_INVALID_ENDPOINT_FORMAT
1706L
//
// MessageId: RPC_S_INVALID_NET_ADDR
//
// MessageText:
//
// The network address is invalid.
//
#define
RPC_S_INVALID_NET_ADDR
1707L
//
// MessageId: RPC_S_NO_ENDPOINT_FOUND
//
// MessageText:
//
// No endpoint was found.
//
#define
RPC_S_NO_ENDPOINT_FOUND
1708L
//
// MessageId: RPC_S_INVALID_TIMEOUT
//
// MessageText:
//
// The timeout value is invalid.
//
#define
RPC_S_INVALID_TIMEOUT
1709L
//
// MessageId: RPC_S_OBJECT_NOT_FOUND
//
// MessageText:
//
// The object universal unique identifier (UUID) was not found.
//
#define
RPC_S_OBJECT_NOT_FOUND
1710L
//
// MessageId: RPC_S_ALREADY_REGISTERED
//
// MessageText:
//
// The object universal unique identifier (UUID) has already been
registered.
//
#define
RPC_S_ALREADY_REGISTERED
1711L
//
// MessageId: RPC_S_TYPE_ALREADY_REGISTERED
//
// MessageText:
//
// The type universal unique identifier (UUID) has already been
registered.
//
#define RPC_S_TYPE_ALREADY_REGISTERED
1712L
//
// MessageId: RPC_S_ALREADY_LISTENING
//
// MessageText:
//
// The RPC server is already listening.
//
#define
RPC_S_ALREADY_LISTENING
1713L
//
// MessageId: RPC_S_NO_PROTSEQS_REGISTERED
//
// MessageText:
//
// No protocol sequences have been registered.
//
#define
RPC_S_NO_PROTSEQS_REGISTERED
1714L
//
// MessageId: RPC_S_NOT_LISTENING
//
// MessageText:
//
// The RPC server is not listening.
//
#define
RPC_S_NOT_LISTENING
1715L
//
// MessageId: RPC_S_UNKNOWN_MGR_TYPE
//
// MessageText:
//
// The manager type is unknown.
//
#define
RPC_S_UNKNOWN_MGR_TYPE
1716L
//
// MessageId: RPC_S_UNKNOWN_IF
//
// MessageText:
//
// The interface is unknown.
//
#define
RPC_S_UNKNOWN_IF
1717L
//
// MessageId: RPC_S_NO_BINDINGS
//
// MessageText:
//
// There are no bindings.
//
#define
RPC_S_NO_BINDINGS
1718L
//
// MessageId: RPC_S_NO_PROTSEQS
//
// MessageText:
//
// There are no protocol sequences.
//
#define
RPC_S_NO_PROTSEQS
1719L
//
// MessageId: RPC_S_CANT_CREATE_ENDPOINT
//
// MessageText:
//
// The endpoint cannot be created.
//
#define
RPC_S_CANT_CREATE_ENDPOINT
1720L
//
// MessageId: RPC_S_OUT_OF_RESOURCES
//
// MessageText:
//
// Not enough resources are available to complete this operation.
//
#define
RPC_S_OUT_OF_RESOURCES
1721L
//
// MessageId: RPC_S_SERVER_UNAVAILABLE
//
// MessageText:
//
// The RPC server is unavailable.
//
#define
RPC_S_SERVER_UNAVAILABLE
1722L
//
// MessageId: RPC_S_SERVER_TOO_BUSY
//
// MessageText:
//
// The RPC server is too busy to complete this operation.
//
#define
RPC_S_SERVER_TOO_BUSY
1723L
//
// MessageId: RPC_S_INVALID_NETWORK_OPTIONS
//
// MessageText:
//
// The network options are invalid.
//
#define RPC_S_INVALID_NETWORK_OPTIONS
1724L
//
// MessageId: RPC_S_NO_CALL_ACTIVE
//
// MessageText:
//
// There are no remote procedure calls active on this thread.
//
#define
RPC_S_NO_CALL_ACTIVE
1725L
//
// MessageId: RPC_S_CALL_FAILED
//
// MessageText:
//
// The remote procedure call failed.
//
#define
RPC_S_CALL_FAILED
1726L
//
// MessageId: RPC_S_CALL_FAILED_DNE
//
// MessageText:
//
// The remote procedure call failed and did not execute.
//
#define
RPC_S_CALL_FAILED_DNE
1727L
//
// MessageId: RPC_S_PROTOCOL_ERROR
//
// MessageText:
//
// A remote procedure call (RPC) protocol error occurred.
//
#define
RPC_S_PROTOCOL_ERROR
1728L
//
// MessageId: RPC_S_PROXY_ACCESS_DENIED
//
// MessageText:
//
// Access to the HTTP proxy is denied.
//
#define
RPC_S_PROXY_ACCESS_DENIED
1729L
//
// MessageId: RPC_S_UNSUPPORTED_TRANS_SYN
//
// MessageText:
//
// The transfer syntax is not supported by the RPC server.
//
#define
RPC_S_UNSUPPORTED_TRANS_SYN
1730L
//
// MessageId: RPC_S_UNSUPPORTED_TYPE
//
// MessageText:
//
// The universal unique identifier (UUID) type is not supported.
//
#define
RPC_S_UNSUPPORTED_TYPE
1732L
//
// MessageId: RPC_S_INVALID_TAG
//
// MessageText:
//
// The tag is invalid.
//
#define
RPC_S_INVALID_TAG
1733L
//
// MessageId: RPC_S_INVALID_BOUND
//
// MessageText:
//
// The array bounds are invalid.
//
#define
RPC_S_INVALID_BOUND
1734L
//
// MessageId: RPC_S_NO_ENTRY_NAME
//
// MessageText:
//
// The binding does not contain an entry name.
//
#define
RPC_S_NO_ENTRY_NAME
1735L
//
// MessageId: RPC_S_INVALID_NAME_SYNTAX
//
// MessageText:
//
// The name syntax is invalid.
//
#define
RPC_S_INVALID_NAME_SYNTAX
1736L
//
// MessageId: RPC_S_UNSUPPORTED_NAME_SYNTAX
//
// MessageText:
//
// The name syntax is not supported.
//
#define RPC_S_UNSUPPORTED_NAME_SYNTAX
1737L
//
// MessageId: RPC_S_UUID_NO_ADDRESS
//
// MessageText:
//
// No network address is available to use to construct a universal
unique identifier (UUID).
//
#define
RPC_S_UUID_NO_ADDRESS
1739L
//
// MessageId: RPC_S_DUPLICATE_ENDPOINT
//
// MessageText:
//
// The endpoint is a duplicate.
//
#define
RPC_S_DUPLICATE_ENDPOINT
1740L
//
// MessageId: RPC_S_UNKNOWN_AUTHN_TYPE
//
// MessageText:
//
// The authentication type is unknown.
//
#define
RPC_S_UNKNOWN_AUTHN_TYPE
1741L
//
// MessageId: RPC_S_MAX_CALLS_TOO_SMALL
//
// MessageText:
//
// The maximum number of calls is too small.
//
#define
RPC_S_MAX_CALLS_TOO_SMALL
1742L
//
// MessageId: RPC_S_STRING_TOO_LONG
//
// MessageText:
//
// The string is too long.
//
#define
RPC_S_STRING_TOO_LONG
1743L
//
// MessageId: RPC_S_PROTSEQ_NOT_FOUND
//
// MessageText:
//
// The RPC protocol sequence was not found.
//
#define
RPC_S_PROTSEQ_NOT_FOUND
1744L
//
// MessageId: RPC_S_PROCNUM_OUT_OF_RANGE
//
// MessageText:
//
// The procedure number is out of range.
//
#define
RPC_S_PROCNUM_OUT_OF_RANGE
1745L
//
// MessageId: RPC_S_BINDING_HAS_NO_AUTH
//
// MessageText:
//
// The binding does not contain any authentication information.
//
#define
RPC_S_BINDING_HAS_NO_AUTH
1746L
//
// MessageId: RPC_S_UNKNOWN_AUTHN_SERVICE
//
// MessageText:
//
// The authentication service is unknown.
//
#define
RPC_S_UNKNOWN_AUTHN_SERVICE
1747L
//
// MessageId: RPC_S_UNKNOWN_AUTHN_LEVEL
//
// MessageText:
//
// The authentication level is unknown.
//
#define
RPC_S_UNKNOWN_AUTHN_LEVEL
1748L
//
// MessageId: RPC_S_INVALID_AUTH_IDENTITY
//
// MessageText:
//
// The security context is invalid.
//
#define
RPC_S_INVALID_AUTH_IDENTITY
1749L
//
// MessageId: RPC_S_UNKNOWN_AUTHZ_SERVICE
//
// MessageText:
//
// The authorization service is unknown.
//
#define
RPC_S_UNKNOWN_AUTHZ_SERVICE
1750L
//
// MessageId: EPT_S_INVALID_ENTRY
//
// MessageText:
//
// The entry is invalid.
//
#define
EPT_S_INVALID_ENTRY
1751L
//
// MessageId: EPT_S_CANT_PERFORM_OP
//
// MessageText:
//
// The server endpoint cannot perform the operation.
//
#define
EPT_S_CANT_PERFORM_OP
1752L
//
// MessageId: EPT_S_NOT_REGISTERED
//
// MessageText:
//
// There are no more endpoints available from the endpoint mapper.
//
#define
EPT_S_NOT_REGISTERED
1753L
//
// MessageId: RPC_S_NOTHING_TO_EXPORT
//
// MessageText:
//
// No interfaces have been exported.
//
#define
RPC_S_NOTHING_TO_EXPORT
1754L
//
// MessageId: RPC_S_INCOMPLETE_NAME
//
// MessageText:
//
// The entry name is incomplete.
//
#define
RPC_S_INCOMPLETE_NAME
1755L
//
// MessageId: RPC_S_INVALID_VERS_OPTION
//
// MessageText:
//
// The version option is invalid.
//
#define
RPC_S_INVALID_VERS_OPTION
1756L
//
// MessageId: RPC_S_NO_MORE_MEMBERS
//
// MessageText:
//
// There are no more members.
//
#define
RPC_S_NO_MORE_MEMBERS
1757L
//
// MessageId: RPC_S_NOT_ALL_OBJS_UNEXPORTED
//
// MessageText:
//
// There is nothing to unexport.
//
#define RPC_S_NOT_ALL_OBJS_UNEXPORTED
1758L
//
// MessageId: RPC_S_INTERFACE_NOT_FOUND
//
// MessageText:
//
// The interface was not found.
//
#define
RPC_S_INTERFACE_NOT_FOUND
1759L
//
// MessageId: RPC_S_ENTRY_ALREADY_EXISTS
//
// MessageText:
//
// The entry already exists.
//
#define
RPC_S_ENTRY_ALREADY_EXISTS
1760L
//
// MessageId: RPC_S_ENTRY_NOT_FOUND
//
// MessageText:
//
// The entry is not found.
//
#define
RPC_S_ENTRY_NOT_FOUND
1761L
//
// MessageId: RPC_S_NAME_SERVICE_UNAVAILABLE
//
// MessageText:
//
// The name service is unavailable.
//
#define RPC_S_NAME_SERVICE_UNAVAILABLE 1762L
//
// MessageId: RPC_S_INVALID_NAF_ID
//
// MessageText:
//
// The network address family is invalid.
//
#define
RPC_S_INVALID_NAF_ID
1763L
//
// MessageId: RPC_S_CANNOT_SUPPORT
//
// MessageText:
//
// The requested operation is not supported.
//
#define
RPC_S_CANNOT_SUPPORT
1764L
//
// MessageId: RPC_S_NO_CONTEXT_AVAILABLE
//
// MessageText:
//
// No security context is available to allow impersonation.
//
#define
RPC_S_NO_CONTEXT_AVAILABLE
1765L
//
// MessageId: RPC_S_INTERNAL_ERROR
//
// MessageText:
//
// An internal error occurred in a remote procedure call (RPC).
//
#define
RPC_S_INTERNAL_ERROR
1766L
//
// MessageId: RPC_S_ZERO_DIVIDE
//
// MessageText:
//
// The RPC server attempted an integer division by zero.
//
#define
RPC_S_ZERO_DIVIDE
1767L
//
// MessageId: RPC_S_ADDRESS_ERROR
//
// MessageText:
//
// An addressing error occurred in the RPC server.
//
#define
RPC_S_ADDRESS_ERROR
1768L
//
// MessageId: RPC_S_FP_DIV_ZERO
//
// MessageText:
//
// A floating-point operation at the RPC server caused a division by
zero.
//
#define
RPC_S_FP_DIV_ZERO
1769L
//
// MessageId: RPC_S_FP_UNDERFLOW
//
// MessageText:
//
// A floating-point underflow occurred at the RPC server.
//
#define
RPC_S_FP_UNDERFLOW
1770L
//
// MessageId: RPC_S_FP_OVERFLOW
//
// MessageText:
//
// A floating-point overflow occurred at the RPC server.
//
#define
RPC_S_FP_OVERFLOW
1771L
//
// MessageId: RPC_X_NO_MORE_ENTRIES
//
// MessageText:
//
// The list of RPC servers available for the binding of auto handles
has been exhausted.
//
#define
RPC_X_NO_MORE_ENTRIES
1772L
//
// MessageId: RPC_X_SS_CHAR_TRANS_OPEN_FAIL
//
// MessageText:
//
// Unable to open the character translation table file.
//
#define RPC_X_SS_CHAR_TRANS_OPEN_FAIL
1773L
//
// MessageId: RPC_X_SS_CHAR_TRANS_SHORT_FILE
//
// MessageText:
//
// The file containing the character translation table has fewer than
512 bytes.
//
#define RPC_X_SS_CHAR_TRANS_SHORT_FILE 1774L
//
// MessageId: RPC_X_SS_IN_NULL_CONTEXT
//
// MessageText:
//
// A null context handle was passed from the client to the host during
a remote procedure call.
//
#define
RPC_X_SS_IN_NULL_CONTEXT
1775L
//
// MessageId: RPC_X_SS_CONTEXT_DAMAGED
//
// MessageText:
//
// The context handle changed during a remote procedure call.
//
#define
RPC_X_SS_CONTEXT_DAMAGED
1777L
//
// MessageId: RPC_X_SS_HANDLES_MISMATCH
//
// MessageText:
//
// The binding handles passed to a remote procedure call do not match.
//
#define
RPC_X_SS_HANDLES_MISMATCH
1778L
//
// MessageId: RPC_X_SS_CANNOT_GET_CALL_HANDLE
//
// MessageText:
//
// The stub is unable to get the remote procedure call handle.
//
#define RPC_X_SS_CANNOT_GET_CALL_HANDLE 1779L
//
// MessageId: RPC_X_NULL_REF_POINTER
//
// MessageText:
//
// A null reference pointer was passed to the stub.
//
#define
RPC_X_NULL_REF_POINTER
1780L
//
// MessageId: RPC_X_ENUM_VALUE_OUT_OF_RANGE
//
// MessageText:
//
// The enumeration value is out of range.
//
#define RPC_X_ENUM_VALUE_OUT_OF_RANGE
1781L
//
// MessageId: RPC_X_BYTE_COUNT_TOO_SMALL
//
// MessageText:
//
// The byte count is too small.
//
#define
RPC_X_BYTE_COUNT_TOO_SMALL
1782L
//
// MessageId: RPC_X_BAD_STUB_DATA
//
// MessageText:
//
// The stub received bad data.
//
#define
RPC_X_BAD_STUB_DATA
1783L
//
// MessageId: ERROR_INVALID_USER_BUFFER
//
// MessageText:
//
// The supplied user buffer is not valid for the requested operation.
//
#define
ERROR_INVALID_USER_BUFFER
1784L
//
// MessageId: ERROR_UNRECOGNIZED_MEDIA
//
// MessageText:
//
// The disk media is not recognized. It may not be formatted.
//
#define
ERROR_UNRECOGNIZED_MEDIA
1785L
//
// MessageId: ERROR_NO_TRUST_LSA_SECRET
//
// MessageText:
//
// The workstation does not have a trust secret.
//
#define
ERROR_NO_TRUST_LSA_SECRET
1786L
//
// MessageId: ERROR_NO_TRUST_SAM_ACCOUNT
//
// MessageText:
//
// The security database on the server does not have a computer account
for this workstation trust relationship.
//
#define
ERROR_NO_TRUST_SAM_ACCOUNT
1787L
//
// MessageId: ERROR_TRUSTED_DOMAIN_FAILURE
//
// MessageText:
//
// The trust relationship between the primary domain and the trusted
domain failed.
//
#define
ERROR_TRUSTED_DOMAIN_FAILURE
1788L
//
// MessageId: ERROR_TRUSTED_RELATIONSHIP_FAILURE
//
// MessageText:
//
// The trust relationship between this workstation and the primary
domain failed.
//
#define ERROR_TRUSTED_RELATIONSHIP_FAILURE 1789L
//
// MessageId: ERROR_TRUST_FAILURE
//
// MessageText:
//
// The network logon failed.
//
#define
ERROR_TRUST_FAILURE
1790L
//
// MessageId: RPC_S_CALL_IN_PROGRESS
//
// MessageText:
//
// A remote procedure call is already in progress for this thread.
//
#define
RPC_S_CALL_IN_PROGRESS
1791L
//
// MessageId: ERROR_NETLOGON_NOT_STARTED
//
// MessageText:
//
// An attempt was made to logon, but the network logon service was not
started.
//
#define
ERROR_NETLOGON_NOT_STARTED
1792L
//
// MessageId: ERROR_ACCOUNT_EXPIRED
//
// MessageText:
//
// The user's account has expired.
//
#define
ERROR_ACCOUNT_EXPIRED
1793L
//
// MessageId: ERROR_REDIRECTOR_HAS_OPEN_HANDLES
//
// MessageText:
//
// The redirector is in use and cannot be unloaded.
//
#define ERROR_REDIRECTOR_HAS_OPEN_HANDLES 1794L
//
// MessageId: ERROR_PRINTER_DRIVER_ALREADY_INSTALLED
//
// MessageText:
//
// The specified printer driver is already installed.
//
#define ERROR_PRINTER_DRIVER_ALREADY_INSTALLED 1795L
//
// MessageId: ERROR_UNKNOWN_PORT
//
// MessageText:
//
// The specified port is unknown.
//
#define
ERROR_UNKNOWN_PORT
1796L
//
// MessageId: ERROR_UNKNOWN_PRINTER_DRIVER
//
// MessageText:
//
// The printer driver is unknown.
//
#define
ERROR_UNKNOWN_PRINTER_DRIVER
1797L
//
// MessageId: ERROR_UNKNOWN_PRINTPROCESSOR
//
// MessageText:
//
// The print processor is unknown.
//
#define
ERROR_UNKNOWN_PRINTPROCESSOR
1798L
//
// MessageId: ERROR_INVALID_SEPARATOR_FILE
//
// MessageText:
//
// The specified separator file is invalid.
//
#define
ERROR_INVALID_SEPARATOR_FILE
1799L
//
// MessageId: ERROR_INVALID_PRIORITY
//
// MessageText:
//
// The specified priority is invalid.
//
#define
ERROR_INVALID_PRIORITY
1800L
//
// MessageId: ERROR_INVALID_PRINTER_NAME
//
// MessageText:
//
// The printer name is invalid.
//
#define
ERROR_INVALID_PRINTER_NAME
1801L
//
// MessageId: ERROR_PRINTER_ALREADY_EXISTS
//
// MessageText:
//
// The printer already exists.
//
#define
ERROR_PRINTER_ALREADY_EXISTS
1802L
//
// MessageId: ERROR_INVALID_PRINTER_COMMAND
//
// MessageText:
//
// The printer command is invalid.
//
#define ERROR_INVALID_PRINTER_COMMAND
1803L
//
// MessageId: ERROR_INVALID_DATATYPE
//
// MessageText:
//
// The specified datatype is invalid.
//
#define
ERROR_INVALID_DATATYPE
1804L
//
// MessageId: ERROR_INVALID_ENVIRONMENT
//
// MessageText:
//
// The environment specified is invalid.
//
#define
ERROR_INVALID_ENVIRONMENT
1805L
//
// MessageId: RPC_S_NO_MORE_BINDINGS
//
// MessageText:
//
// There are no more bindings.
//
#define
RPC_S_NO_MORE_BINDINGS
1806L
//
// MessageId: ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT
//
// MessageText:
//
// The account used is an interdomain trust account. Use your global
user account or local user account to access this server.
//
#define ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT 1807L
//
// MessageId: ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT
//
// MessageText:
//
// The account used is a computer account. Use your global user account
or local user account to access this server.
//
#define ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT 1808L
//
// MessageId: ERROR_NOLOGON_SERVER_TRUST_ACCOUNT
//
// MessageText:
//
// The account used is a server trust account. Use your global user
account or local user account to access this server.
//
#define ERROR_NOLOGON_SERVER_TRUST_ACCOUNT 1809L
//
// MessageId: ERROR_DOMAIN_TRUST_INCONSISTENT
//
// MessageText:
//
// The name or security ID (SID) of the domain specified is
inconsistent with the trust information for that domain.
//
#define ERROR_DOMAIN_TRUST_INCONSISTENT 1810L
//
// MessageId: ERROR_SERVER_HAS_OPEN_HANDLES
//
// MessageText:
//
// The server is in use and cannot be unloaded.
//
#define ERROR_SERVER_HAS_OPEN_HANDLES
1811L
//
// MessageId: ERROR_RESOURCE_DATA_NOT_FOUND
//
// MessageText:
//
// The specified image file did not contain a resource section.
//
#define ERROR_RESOURCE_DATA_NOT_FOUND
1812L
//
// MessageId: ERROR_RESOURCE_TYPE_NOT_FOUND
//
// MessageText:
//
// The specified resource type cannot be found in the image file.
//
#define ERROR_RESOURCE_TYPE_NOT_FOUND
1813L
//
// MessageId: ERROR_RESOURCE_NAME_NOT_FOUND
//
// MessageText:
//
// The specified resource name cannot be found in the image file.
//
#define ERROR_RESOURCE_NAME_NOT_FOUND
1814L
//
// MessageId: ERROR_RESOURCE_LANG_NOT_FOUND
//
// MessageText:
//
// The specified resource language ID cannot be found in the image file.
//
#define ERROR_RESOURCE_LANG_NOT_FOUND
1815L
//
// MessageId: ERROR_NOT_ENOUGH_QUOTA
//
// MessageText:
//
// Not enough quota is available to process this command.
//
#define
ERROR_NOT_ENOUGH_QUOTA
1816L
//
// MessageId: RPC_S_NO_INTERFACES
//
// MessageText:
//
// No interfaces have been registered.
//
#define
RPC_S_NO_INTERFACES
1817L
//
// MessageId: RPC_S_CALL_CANCELLED
//
// MessageText:
//
// The remote procedure call was cancelled.
//
#define
RPC_S_CALL_CANCELLED
1818L
//
// MessageId: RPC_S_BINDING_INCOMPLETE
//
// MessageText:
//
// The binding handle does not contain all required information.
//
#define
RPC_S_BINDING_INCOMPLETE
1819L
//
// MessageId: RPC_S_COMM_FAILURE
//
// MessageText:
//
// A communications failure occurred during a remote procedure call.
//
#define
RPC_S_COMM_FAILURE
1820L
//
// MessageId: RPC_S_UNSUPPORTED_AUTHN_LEVEL
//
// MessageText:
//
// The requested authentication level is not supported.
//
#define RPC_S_UNSUPPORTED_AUTHN_LEVEL
1821L
//
// MessageId: RPC_S_NO_PRINC_NAME
//
// MessageText:
//
// No principal name registered.
//
#define
RPC_S_NO_PRINC_NAME
1822L
//
// MessageId: RPC_S_NOT_RPC_ERROR
//
// MessageText:
//
// The error specified is not a valid Windows RPC error code.
//
#define
RPC_S_NOT_RPC_ERROR
1823L
//
// MessageId: RPC_S_UUID_LOCAL_ONLY
//
// MessageText:
//
// A UUID that is valid only on this computer has been allocated.
//
#define
RPC_S_UUID_LOCAL_ONLY
1824L
//
// MessageId: RPC_S_SEC_PKG_ERROR
//
// MessageText:
//
// A security package specific error occurred.
//
#define
RPC_S_SEC_PKG_ERROR
1825L
//
// MessageId: RPC_S_NOT_CANCELLED
//
// MessageText:
//
// Thread is not canceled.
//
#define
RPC_S_NOT_CANCELLED
1826L
//
// MessageId: RPC_X_INVALID_ES_ACTION
//
// MessageText:
//
// Invalid operation on the encoding/decoding handle.
//
#define
RPC_X_INVALID_ES_ACTION
1827L
//
// MessageId: RPC_X_WRONG_ES_VERSION
//
// MessageText:
//
// Incompatible version of the serializing package.
//
#define
RPC_X_WRONG_ES_VERSION
1828L
//
// MessageId: RPC_X_WRONG_STUB_VERSION
//
// MessageText:
//
// Incompatible version of the RPC stub.
//
#define
RPC_X_WRONG_STUB_VERSION
1829L
//
// MessageId: RPC_X_INVALID_PIPE_OBJECT
//
// MessageText:
//
// The RPC pipe object is invalid or corrupted.
//
#define
RPC_X_INVALID_PIPE_OBJECT
1830L
//
// MessageId: RPC_X_WRONG_PIPE_ORDER
//
// MessageText:
//
// An invalid operation was attempted on an RPC pipe object.
//
#define
RPC_X_WRONG_PIPE_ORDER
1831L
//
// MessageId: RPC_X_WRONG_PIPE_VERSION
//
// MessageText:
//
// Unsupported RPC pipe version.
//
#define
RPC_X_WRONG_PIPE_VERSION
1832L
//
// MessageId: RPC_S_COOKIE_AUTH_FAILED
//
// MessageText:
//
// HTTP proxy server rejected the connection because the cookie
authentication failed.
//
#define
RPC_S_COOKIE_AUTH_FAILED
1833L
//
// MessageId: RPC_S_GROUP_MEMBER_NOT_FOUND
//
// MessageText:
//
// The group member was not found.
//
#define
RPC_S_GROUP_MEMBER_NOT_FOUND
1898L
//
// MessageId: EPT_S_CANT_CREATE
//
// MessageText:
//
// The endpoint mapper database entry could not be created.
//
#define
EPT_S_CANT_CREATE
1899L
//
// MessageId: RPC_S_INVALID_OBJECT
//
// MessageText:
//
// The object universal unique identifier (UUID) is the nil UUID.
//
#define
RPC_S_INVALID_OBJECT
1900L
//
// MessageId: ERROR_INVALID_TIME
//
// MessageText:
//
// The specified time is invalid.
//
#define
ERROR_INVALID_TIME
1901L
//
// MessageId: ERROR_INVALID_FORM_NAME
//
// MessageText:
//
// The specified form name is invalid.
//
#define
ERROR_INVALID_FORM_NAME
1902L
//
// MessageId: ERROR_INVALID_FORM_SIZE
//
// MessageText:
//
// The specified form size is invalid.
//
#define
ERROR_INVALID_FORM_SIZE
1903L
//
// MessageId: ERROR_ALREADY_WAITING
//
// MessageText:
//
// The specified printer handle is already being waited on
//
#define
ERROR_ALREADY_WAITING
1904L
//
// MessageId: ERROR_PRINTER_DELETED
//
// MessageText:
//
// The specified printer has been deleted.
//
#define
ERROR_PRINTER_DELETED
1905L
//
// MessageId: ERROR_INVALID_PRINTER_STATE
//
// MessageText:
//
// The state of the printer is invalid.
//
#define
ERROR_INVALID_PRINTER_STATE
1906L
//
// MessageId: ERROR_PASSWORD_MUST_CHANGE
//
// MessageText:
//
// The user's password must be changed before logging on the first time.
//
#define
ERROR_PASSWORD_MUST_CHANGE
1907L
//
// MessageId: ERROR_DOMAIN_CONTROLLER_NOT_FOUND
//
// MessageText:
//
// Could not find the domain controller for this domain.
//
#define ERROR_DOMAIN_CONTROLLER_NOT_FOUND 1908L
//
// MessageId: ERROR_ACCOUNT_LOCKED_OUT
//
// MessageText:
//
// The referenced account is currently locked out and may not be logged
on to.
//
#define
ERROR_ACCOUNT_LOCKED_OUT
1909L
//
// MessageId: OR_INVALID_OXID
//
// MessageText:
//
// The object exporter specified was not found.
//
#define
OR_INVALID_OXID
1910L
//
// MessageId: OR_INVALID_OID
//
// MessageText:
//
// The object specified was not found.
//
#define
OR_INVALID_OID
1911L
//
// MessageId: OR_INVALID_SET
//
// MessageText:
//
// The object resolver set specified was not found.
//
#define
OR_INVALID_SET
1912L
//
// MessageId: RPC_S_SEND_INCOMPLETE
//
// MessageText:
//
// Some data remains to be sent in the request buffer.
//
#define
RPC_S_SEND_INCOMPLETE
1913L
//
// MessageId: RPC_S_INVALID_ASYNC_HANDLE
//
// MessageText:
//
// Invalid asynchronous remote procedure call handle.
//
#define
RPC_S_INVALID_ASYNC_HANDLE
1914L
//
// MessageId: RPC_S_INVALID_ASYNC_CALL
//
// MessageText:
//
// Invalid asynchronous RPC call handle for this operation.
//
#define
RPC_S_INVALID_ASYNC_CALL
1915L
//
// MessageId: RPC_X_PIPE_CLOSED
//
// MessageText:
//
// The RPC pipe object has already been closed.
//
#define
RPC_X_PIPE_CLOSED
1916L
//
// MessageId: RPC_X_PIPE_DISCIPLINE_ERROR
//
// MessageText:
//
// The RPC call completed before all pipes were processed.
//
#define
RPC_X_PIPE_DISCIPLINE_ERROR
1917L
//
// MessageId: RPC_X_PIPE_EMPTY
//
// MessageText:
//
// No more data is available from the RPC pipe.
//
#define
RPC_X_PIPE_EMPTY
1918L
//
// MessageId: ERROR_NO_SITENAME
//
// MessageText:
//
// No site name is available for this machine.
//
#define
ERROR_NO_SITENAME
1919L
//
// MessageId: ERROR_CANT_ACCESS_FILE
//
// MessageText:
//
// The file cannot be accessed by the system.
//
#define
ERROR_CANT_ACCESS_FILE
1920L
//
// MessageId: ERROR_CANT_RESOLVE_FILENAME
//
// MessageText:
//
// The name of the file cannot be resolved by the system.
//
#define
ERROR_CANT_RESOLVE_FILENAME
1921L
//
// MessageId: RPC_S_ENTRY_TYPE_MISMATCH
//
// MessageText:
//
// The entry is not of the expected type.
//
#define
RPC_S_ENTRY_TYPE_MISMATCH
1922L
//
// MessageId: RPC_S_NOT_ALL_OBJS_EXPORTED
//
// MessageText:
//
// Not all object UUIDs could be exported to the specified entry.
//
#define
RPC_S_NOT_ALL_OBJS_EXPORTED
1923L
//
// MessageId: RPC_S_INTERFACE_NOT_EXPORTED
//
// MessageText:
//
// Interface could not be exported to the specified entry.
//
#define
RPC_S_INTERFACE_NOT_EXPORTED
1924L
//
// MessageId: RPC_S_PROFILE_NOT_ADDED
//
// MessageText:
//
// The specified profile entry could not be added.
//
#define
RPC_S_PROFILE_NOT_ADDED
1925L
//
// MessageId: RPC_S_PRF_ELT_NOT_ADDED
//
// MessageText:
//
// The specified profile element could not be added.
//
#define
RPC_S_PRF_ELT_NOT_ADDED
1926L
//
// MessageId: RPC_S_PRF_ELT_NOT_REMOVED
//
// MessageText:
//
// The specified profile element could not be removed.
//
#define
RPC_S_PRF_ELT_NOT_REMOVED
1927L
//
// MessageId: RPC_S_GRP_ELT_NOT_ADDED
//
// MessageText:
//
// The group element could not be added.
//
#define
RPC_S_GRP_ELT_NOT_ADDED
1928L
//
// MessageId: RPC_S_GRP_ELT_NOT_REMOVED
//
// MessageText:
//
// The group element could not be removed.
//
#define
RPC_S_GRP_ELT_NOT_REMOVED
1929L
//
// MessageId: ERROR_KM_DRIVER_BLOCKED
//
// MessageText:
//
// The printer driver is not compatible with a policy enabled on your
computer that blocks NT 4.0 drivers.
//
#define
ERROR_KM_DRIVER_BLOCKED
1930L
//
// MessageId: ERROR_CONTEXT_EXPIRED
//
// MessageText:
//
// The context has expired and can no longer be used.
//
#define
ERROR_CONTEXT_EXPIRED
1931L
//
// MessageId: ERROR_PER_USER_TRUST_QUOTA_EXCEEDED
//
// MessageText:
//
// The current user's delegated trust creation quota has been exceeded.
//
#define ERROR_PER_USER_TRUST_QUOTA_EXCEEDED 1932L
//
// MessageId: ERROR_ALL_USER_TRUST_QUOTA_EXCEEDED
//
// MessageText:
//
// The total delegated trust creation quota has been exceeded.
//
#define ERROR_ALL_USER_TRUST_QUOTA_EXCEEDED 1933L
//
// MessageId: ERROR_USER_DELETE_TRUST_QUOTA_EXCEEDED
//
// MessageText:
//
// The current user's delegated trust deletion quota has been exceeded.
//
#define ERROR_USER_DELETE_TRUST_QUOTA_EXCEEDED 1934L
//
// MessageId: ERROR_AUTHENTICATION_FIREWALL_FAILED
//
// MessageText:
//
//
Logon Failure: The machine you are logging onto is protected by an
authentication firewall. The specified account is not allowed to
authenticate to the machine.
//
#define ERROR_AUTHENTICATION_FIREWALL_FAILED 1935L
//
// MessageId: ERROR_REMOTE_PRINT_CONNECTIONS_BLOCKED
//
// MessageText:
//
// Remote connections to the Print Spooler are blocked by a policy set
on your machine.
//
#define ERROR_REMOTE_PRINT_CONNECTIONS_BLOCKED 1936L
//
// MessageId: ERROR_NTLM_BLOCKED
//
// MessageText:
//
// Logon Failure: Authentication failed because NTLM authentication has
been disabled.
//
#define
ERROR_NTLM_BLOCKED
1937L
///////////////////////////////////////////////////
//
//
//
OpenGL Error
codes
//
//
//
//
2000 to
2009
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_INVALID_PIXEL_FORMAT
//
// MessageText:
//
// The pixel format is invalid.
//
#define
ERROR_INVALID_PIXEL_FORMAT
2000L
//
// MessageId: ERROR_BAD_DRIVER
//
// MessageText:
//
// The specified driver is invalid.
//
#define
ERROR_BAD_DRIVER
2001L
//
// MessageId: ERROR_INVALID_WINDOW_STYLE
//
// MessageText:
//
// The window style or class attribute is invalid for this operation.
//
#define
ERROR_INVALID_WINDOW_STYLE
2002L
//
// MessageId: ERROR_METAFILE_NOT_SUPPORTED
//
// MessageText:
//
// The requested metafile operation is not supported.
//
#define
ERROR_METAFILE_NOT_SUPPORTED
2003L
//
// MessageId: ERROR_TRANSFORM_NOT_SUPPORTED
//
// MessageText:
//
// The requested transformation operation is not supported.
//
#define ERROR_TRANSFORM_NOT_SUPPORTED
2004L
//
// MessageId: ERROR_CLIPPING_NOT_SUPPORTED
//
// MessageText:
//
// The requested clipping operation is not supported.
//
#define
ERROR_CLIPPING_NOT_SUPPORTED
2005L
///////////////////////////////////////////////////
//
//
// Image
Color Management Error
codes //
//
//
//
2010 to
2049
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_INVALID_CMM
//
// MessageText:
//
// The specified color management module is invalid.
//
#define
ERROR_INVALID_CMM
2010L
//
// MessageId: ERROR_INVALID_PROFILE
//
// MessageText:
//
// The specified color profile is invalid.
//
#define
ERROR_INVALID_PROFILE
2011L
//
// MessageId: ERROR_TAG_NOT_FOUND
//
// MessageText:
//
// The specified tag was not found.
//
#define
ERROR_TAG_NOT_FOUND
2012L
//
// MessageId: ERROR_TAG_NOT_PRESENT
//
// MessageText:
//
// A required tag is not present.
//
#define
ERROR_TAG_NOT_PRESENT
2013L
//
// MessageId: ERROR_DUPLICATE_TAG
//
// MessageText:
//
// The specified tag is already present.
//
#define
ERROR_DUPLICATE_TAG
2014L
//
// MessageId: ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE
//
// MessageText:
//
// The specified color profile is not associated with the specified
device.
//
#define ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE 2015L
//
// MessageId: ERROR_PROFILE_NOT_FOUND
//
// MessageText:
//
// The specified color profile was not found.
//
#define
ERROR_PROFILE_NOT_FOUND
2016L
//
// MessageId: ERROR_INVALID_COLORSPACE
//
// MessageText:
//
// The specified color space is invalid.
//
#define
ERROR_INVALID_COLORSPACE
2017L
//
// MessageId: ERROR_ICM_NOT_ENABLED
//
// MessageText:
//
// Image Color Management is not enabled.
//
#define
ERROR_ICM_NOT_ENABLED
2018L
//
// MessageId: ERROR_DELETING_ICM_XFORM
//
// MessageText:
//
// There was an error while deleting the color transform.
//
#define
ERROR_DELETING_ICM_XFORM
2019L
//
// MessageId: ERROR_INVALID_TRANSFORM
//
// MessageText:
//
// The specified color transform is invalid.
//
#define
ERROR_INVALID_TRANSFORM
2020L
//
// MessageId: ERROR_COLORSPACE_MISMATCH
//
// MessageText:
//
// The specified transform does not match the bitmap's color space.
//
#define
ERROR_COLORSPACE_MISMATCH
2021L
//
// MessageId: ERROR_INVALID_COLORINDEX
//
// MessageText:
//
// The specified named color index is not present in the profile.
//
#define
ERROR_INVALID_COLORINDEX
2022L
//
// MessageId: ERROR_PROFILE_DOES_NOT_MATCH_DEVICE
//
// MessageText:
//
// The specified profile is intended for a device of a different type
than the specified device.
//
#define ERROR_PROFILE_DOES_NOT_MATCH_DEVICE 2023L
///////////////////////////////////////////////////
//
//
//
Winnet32 Error
codes
//
//
//
//
2100 to
2999
//
//
//
// The range 2100 through 2999 is reserved for //
// network status codes. See lmerr.h for
a //
//
complete
listing
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_CONNECTED_OTHER_PASSWORD
//
// MessageText:
//
//
The network connection was made successfully, but the user had to be
prompted for a password other than the one originally specified.
//
#define ERROR_CONNECTED_OTHER_PASSWORD 2108L
//
// MessageId: ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT
//
// MessageText:
//
// The network connection was made successfully using default
credentials.
//
#define ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT 2109L
//
// MessageId: ERROR_BAD_USERNAME
//
// MessageText:
//
// The specified username is invalid.
//
#define
ERROR_BAD_USERNAME
2202L
//
// MessageId: ERROR_NOT_CONNECTED
//
// MessageText:
//
// This network connection does not exist.
//
#define
ERROR_NOT_CONNECTED
2250L
//
// MessageId: ERROR_OPEN_FILES
//
// MessageText:
//
// This network connection has files open or requests pending.
//
#define
ERROR_OPEN_FILES
2401L
//
// MessageId: ERROR_ACTIVE_CONNECTIONS
//
// MessageText:
//
// Active connections still exist.
//
#define
ERROR_ACTIVE_CONNECTIONS
2402L
//
// MessageId: ERROR_DEVICE_IN_USE
//
// MessageText:
//
// The device is in use by an active process and cannot be disconnected.
//
#define
ERROR_DEVICE_IN_USE
2404L
///////////////////////////////////////////////////
//
//
//
Win32 Spooler Error
codes
//
//
//
//
3000 to
3049
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_UNKNOWN_PRINT_MONITOR
//
// MessageText:
//
// The specified print monitor is unknown.
//
#define
ERROR_UNKNOWN_PRINT_MONITOR
3000L
//
// MessageId: ERROR_PRINTER_DRIVER_IN_USE
//
// MessageText:
//
// The specified printer driver is currently in use.
//
#define
ERROR_PRINTER_DRIVER_IN_USE
3001L
//
// MessageId: ERROR_SPOOL_FILE_NOT_FOUND
//
// MessageText:
//
// The spool file was not found.
//
#define
ERROR_SPOOL_FILE_NOT_FOUND
3002L
//
// MessageId: ERROR_SPL_NO_STARTDOC
//
// MessageText:
//
// A StartDocPrinter call was not issued.
//
#define
ERROR_SPL_NO_STARTDOC
3003L
//
// MessageId: ERROR_SPL_NO_ADDJOB
//
// MessageText:
//
// An AddJob call was not issued.
//
#define
ERROR_SPL_NO_ADDJOB
3004L
//
// MessageId: ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED
//
// MessageText:
//
// The specified print processor has already been installed.
//
#define ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED 3005L
//
// MessageId: ERROR_PRINT_MONITOR_ALREADY_INSTALLED
//
// MessageText:
//
// The specified print monitor has already been installed.
//
#define ERROR_PRINT_MONITOR_ALREADY_INSTALLED 3006L
//
// MessageId: ERROR_INVALID_PRINT_MONITOR
//
// MessageText:
//
// The specified print monitor does not have the required functions.
//
#define
ERROR_INVALID_PRINT_MONITOR
3007L
//
// MessageId: ERROR_PRINT_MONITOR_IN_USE
//
// MessageText:
//
// The specified print monitor is currently in use.
//
#define
ERROR_PRINT_MONITOR_IN_USE
3008L
//
// MessageId: ERROR_PRINTER_HAS_JOBS_QUEUED
//
// MessageText:
//
// The requested operation is not allowed when there are jobs queued to
the printer.
//
#define ERROR_PRINTER_HAS_JOBS_QUEUED
3009L
//
// MessageId: ERROR_SUCCESS_REBOOT_REQUIRED
//
// MessageText:
//
// The requested operation is successful. Changes will not be effective
until the system is rebooted.
//
#define ERROR_SUCCESS_REBOOT_REQUIRED
3010L
//
// MessageId: ERROR_SUCCESS_RESTART_REQUIRED
//
// MessageText:
//
// The requested operation is successful. Changes will not be effective
until the service is restarted.
//
#define ERROR_SUCCESS_RESTART_REQUIRED 3011L
//
// MessageId: ERROR_PRINTER_NOT_FOUND
//
// MessageText:
//
// No printers were found.
//
#define
ERROR_PRINTER_NOT_FOUND
3012L
//
// MessageId: ERROR_PRINTER_DRIVER_WARNED
//
// MessageText:
//
// The printer driver is known to be unreliable.
//
#define
ERROR_PRINTER_DRIVER_WARNED
3013L
//
// MessageId: ERROR_PRINTER_DRIVER_BLOCKED
//
// MessageText:
//
// The printer driver is known to harm the system.
//
#define
ERROR_PRINTER_DRIVER_BLOCKED
3014L
//
// MessageId: ERROR_PRINTER_DRIVER_PACKAGE_IN_USE
//
// MessageText:
//
// The specified printer driver package is currently in use.
//
#define ERROR_PRINTER_DRIVER_PACKAGE_IN_USE 3015L
//
// MessageId: ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND
//
// MessageText:
//
// Unable to find a core driver package that is required by the printer
driver package.
//
#define ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND 3016L
//
// MessageId: ERROR_FAIL_REBOOT_REQUIRED
//
// MessageText:
//
// The requested operation failed. A system reboot is required to roll
back changes made.
//
#define
ERROR_FAIL_REBOOT_REQUIRED
3017L
//
// MessageId: ERROR_FAIL_REBOOT_INITIATED
//
// MessageText:
//
// The requested operation failed. A system reboot has been initiated
to roll back changes made.
//
#define
ERROR_FAIL_REBOOT_INITIATED
3018L
//
// MessageId: ERROR_PRINTER_DRIVER_DOWNLOAD_NEEDED
//
// MessageText:
//
// The specified printer driver was not found on the system and needs
to be downloaded.
//
#define ERROR_PRINTER_DRIVER_DOWNLOAD_NEEDED 3019L
//
// MessageId: ERROR_PRINT_JOB_RESTART_REQUIRED
//
// MessageText:
//
// The requested print job has failed to print. A print system update
requires the job to be resubmitted.
//
#define ERROR_PRINT_JOB_RESTART_REQUIRED 3020L
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
3050 to
3199
//
///////////////////////////////////////////////////
//
//
the message range
//
3200 to 3299
// is reserved and
used in isolation lib
//
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
3300 to
3899
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
IO Error
Codes
//
//
//
//
3900 to
3999
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_IO_REISSUE_AS_CACHED
//
// MessageText:
//
// Reissue the given operation as a cached IO operation
//
#define
ERROR_IO_REISSUE_AS_CACHED
3950L
///////////////////////////////////////////////////
//
//
//
Wins Error
codes
//
//
//
//
4000 to
4049
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_WINS_INTERNAL
//
// MessageText:
//
// WINS encountered an error while processing the command.
//
#define
ERROR_WINS_INTERNAL
4000L
//
// MessageId: ERROR_CAN_NOT_DEL_LOCAL_WINS
//
// MessageText:
//
// The local WINS cannot be deleted.
//
#define
ERROR_CAN_NOT_DEL_LOCAL_WINS
4001L
//
// MessageId: ERROR_STATIC_INIT
//
// MessageText:
//
// The importation from the file failed.
//
#define
ERROR_STATIC_INIT
4002L
//
// MessageId: ERROR_INC_BACKUP
//
// MessageText:
//
// The backup failed. Was a full backup done before?
//
#define
ERROR_INC_BACKUP
4003L
//
// MessageId: ERROR_FULL_BACKUP
//
// MessageText:
//
// The backup failed. Check the directory to which you are backing the
database.
//
#define
ERROR_FULL_BACKUP
4004L
//
// MessageId: ERROR_REC_NON_EXISTENT
//
// MessageText:
//
// The name does not exist in the WINS database.
//
#define
ERROR_REC_NON_EXISTENT
4005L
//
// MessageId: ERROR_RPL_NOT_ALLOWED
//
// MessageText:
//
// Replication with a nonconfigured partner is not allowed.
//
#define
ERROR_RPL_NOT_ALLOWED
4006L
///////////////////////////////////////////////////
//
//
//
PeerDist Error
codes
//
//
//
//
4050 to
4099
//
///////////////////////////////////////////////////
//
// MessageId: PEERDIST_ERROR_CONTENTINFO_VERSION_UNSUPPORTED
//
// MessageText:
//
// The version of the supplied content information is not supported.
//
#define PEERDIST_ERROR_CONTENTINFO_VERSION_UNSUPPORTED 4050L
//
// MessageId: PEERDIST_ERROR_CANNOT_PARSE_CONTENTINFO
//
// MessageText:
//
// The supplied content information is malformed.
//
#define PEERDIST_ERROR_CANNOT_PARSE_CONTENTINFO 4051L
//
// MessageId: PEERDIST_ERROR_MISSING_DATA
//
// MessageText:
//
// The requested data cannot be found in local or peer caches.
//
#define
PEERDIST_ERROR_MISSING_DATA
4052L
//
// MessageId: PEERDIST_ERROR_NO_MORE
//
// MessageText:
//
// No more data is available or required.
//
#define
PEERDIST_ERROR_NO_MORE
4053L
//
// MessageId: PEERDIST_ERROR_NOT_INITIALIZED
//
// MessageText:
//
// The supplied object has not been initialized.
//
#define PEERDIST_ERROR_NOT_INITIALIZED 4054L
//
// MessageId: PEERDIST_ERROR_ALREADY_INITIALIZED
//
// MessageText:
//
// The supplied object has already been initialized.
//
#define PEERDIST_ERROR_ALREADY_INITIALIZED 4055L
//
// MessageId: PEERDIST_ERROR_SHUTDOWN_IN_PROGRESS
//
// MessageText:
//
// A shutdown operation is already in progress.
//
#define PEERDIST_ERROR_SHUTDOWN_IN_PROGRESS 4056L
//
// MessageId: PEERDIST_ERROR_INVALIDATED
//
// MessageText:
//
// The supplied object has already been invalidated.
//
#define
PEERDIST_ERROR_INVALIDATED
4057L
//
// MessageId: PEERDIST_ERROR_ALREADY_EXISTS
//
// MessageText:
//
// An element already exists and was not replaced.
//
#define PEERDIST_ERROR_ALREADY_EXISTS
4058L
//
// MessageId: PEERDIST_ERROR_OPERATION_NOTFOUND
//
// MessageText:
//
// Can not cancel the requested operation as it has already been
completed.
//
#define PEERDIST_ERROR_OPERATION_NOTFOUND 4059L
//
// MessageId: PEERDIST_ERROR_ALREADY_COMPLETED
//
// MessageText:
//
// Can not perform the reqested operation because it has already been
carried out.
//
#define PEERDIST_ERROR_ALREADY_COMPLETED 4060L
//
// MessageId: PEERDIST_ERROR_OUT_OF_BOUNDS
//
// MessageText:
//
// An operation accessed data beyond the bounds of valid data.
//
#define
PEERDIST_ERROR_OUT_OF_BOUNDS
4061L
//
// MessageId: PEERDIST_ERROR_VERSION_UNSUPPORTED
//
// MessageText:
//
// The requested version is not supported.
//
#define PEERDIST_ERROR_VERSION_UNSUPPORTED 4062L
//
// MessageId: PEERDIST_ERROR_INVALID_CONFIGURATION
//
// MessageText:
//
// A configuration value is invalid.
//
#define PEERDIST_ERROR_INVALID_CONFIGURATION 4063L
//
// MessageId: PEERDIST_ERROR_NOT_LICENSED
//
// MessageText:
//
// The SKU is not licensed.
//
#define
PEERDIST_ERROR_NOT_LICENSED
4064L
//
// MessageId: PEERDIST_ERROR_SERVICE_UNAVAILABLE
//
// MessageText:
//
// PeerDist Service is still initializing and will be available shortly.
//
#define PEERDIST_ERROR_SERVICE_UNAVAILABLE 4065L
///////////////////////////////////////////////////
//
//
//
DHCP Error
codes
//
//
//
//
4100 to
4149
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_DHCP_ADDRESS_CONFLICT
//
// MessageText:
//
//
The DHCP client has obtained an IP address that is already in use on
the network. The local interface will be disabled until the DHCP client
can obtain a new address.
//
#define
ERROR_DHCP_ADDRESS_CONFLICT
4100L
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
4150 to
4199
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
WMI Error
codes
//
//
//
//
4200 to
4249
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_WMI_GUID_NOT_FOUND
//
// MessageText:
//
// The GUID passed was not recognized as valid by a WMI data provider.
//
#define
ERROR_WMI_GUID_NOT_FOUND
4200L
//
// MessageId: ERROR_WMI_INSTANCE_NOT_FOUND
//
// MessageText:
//
// The instance name passed was not recognized as valid by a WMI data
provider.
//
#define
ERROR_WMI_INSTANCE_NOT_FOUND
4201L
//
// MessageId: ERROR_WMI_ITEMID_NOT_FOUND
//
// MessageText:
//
// The data item ID passed was not recognized as valid by a WMI data
provider.
//
#define
ERROR_WMI_ITEMID_NOT_FOUND
4202L
//
// MessageId: ERROR_WMI_TRY_AGAIN
//
// MessageText:
//
// The WMI request could not be completed and should be retried.
//
#define
ERROR_WMI_TRY_AGAIN
4203L
//
// MessageId: ERROR_WMI_DP_NOT_FOUND
//
// MessageText:
//
// The WMI data provider could not be located.
//
#define
ERROR_WMI_DP_NOT_FOUND
4204L
//
// MessageId: ERROR_WMI_UNRESOLVED_INSTANCE_REF
//
// MessageText:
//
// The WMI data provider references an instance set that has not been
registered.
//
#define ERROR_WMI_UNRESOLVED_INSTANCE_REF 4205L
//
// MessageId: ERROR_WMI_ALREADY_ENABLED
//
// MessageText:
//
// The WMI data block or event notification has already been enabled.
//
#define
ERROR_WMI_ALREADY_ENABLED
4206L
//
// MessageId: ERROR_WMI_GUID_DISCONNECTED
//
// MessageText:
//
// The WMI data block is no longer available.
//
#define
ERROR_WMI_GUID_DISCONNECTED
4207L
//
// MessageId: ERROR_WMI_SERVER_UNAVAILABLE
//
// MessageText:
//
// The WMI data service is not available.
//
#define
ERROR_WMI_SERVER_UNAVAILABLE
4208L
//
// MessageId: ERROR_WMI_DP_FAILED
//
// MessageText:
//
// The WMI data provider failed to carry out the request.
//
#define
ERROR_WMI_DP_FAILED
4209L
//
// MessageId: ERROR_WMI_INVALID_MOF
//
// MessageText:
//
// The WMI MOF information is not valid.
//
#define
ERROR_WMI_INVALID_MOF
4210L
//
// MessageId: ERROR_WMI_INVALID_REGINFO
//
// MessageText:
//
// The WMI registration information is not valid.
//
#define
ERROR_WMI_INVALID_REGINFO
4211L
//
// MessageId: ERROR_WMI_ALREADY_DISABLED
//
// MessageText:
//
// The WMI data block or event notification has already been disabled.
//
#define
ERROR_WMI_ALREADY_DISABLED
4212L
//
// MessageId: ERROR_WMI_READ_ONLY
//
// MessageText:
//
// The WMI data item or data block is read only.
//
#define
ERROR_WMI_READ_ONLY
4213L
//
// MessageId: ERROR_WMI_SET_FAILURE
//
// MessageText:
//
// The WMI data item or data block could not be changed.
//
#define
ERROR_WMI_SET_FAILURE
4214L
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
4250 to
4299
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
RSM (Media Services) Error
codes //
//
//
//
4300 to
4349
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_INVALID_MEDIA
//
// MessageText:
//
// The media identifier does not represent a valid medium.
//
#define
ERROR_INVALID_MEDIA
4300L
//
// MessageId: ERROR_INVALID_LIBRARY
//
// MessageText:
//
// The library identifier does not represent a valid library.
//
#define
ERROR_INVALID_LIBRARY
4301L
//
// MessageId: ERROR_INVALID_MEDIA_POOL
//
// MessageText:
//
// The media pool identifier does not represent a valid media pool.
//
#define
ERROR_INVALID_MEDIA_POOL
4302L
//
// MessageId: ERROR_DRIVE_MEDIA_MISMATCH
//
// MessageText:
//
// The drive and medium are not compatible or exist in different
libraries.
//
#define
ERROR_DRIVE_MEDIA_MISMATCH
4303L
//
// MessageId: ERROR_MEDIA_OFFLINE
//
// MessageText:
//
// The medium currently exists in an offline library and must be online
to perform this operation.
//
#define
ERROR_MEDIA_OFFLINE
4304L
//
// MessageId: ERROR_LIBRARY_OFFLINE
//
// MessageText:
//
// The operation cannot be performed on an offline library.
//
#define
ERROR_LIBRARY_OFFLINE
4305L
//
// MessageId: ERROR_EMPTY
//
// MessageText:
//
// The library, drive, or media pool is empty.
//
#define
ERROR_EMPTY
4306L
//
// MessageId: ERROR_NOT_EMPTY
//
// MessageText:
//
// The library, drive, or media pool must be empty to perform this
operation.
//
#define
ERROR_NOT_EMPTY
4307L
//
// MessageId: ERROR_MEDIA_UNAVAILABLE
//
// MessageText:
//
// No media is currently available in this media pool or library.
//
#define
ERROR_MEDIA_UNAVAILABLE
4308L
//
// MessageId: ERROR_RESOURCE_DISABLED
//
// MessageText:
//
// A resource required for this operation is disabled.
//
#define
ERROR_RESOURCE_DISABLED
4309L
//
// MessageId: ERROR_INVALID_CLEANER
//
// MessageText:
//
// The media identifier does not represent a valid cleaner.
//
#define
ERROR_INVALID_CLEANER
4310L
//
// MessageId: ERROR_UNABLE_TO_CLEAN
//
// MessageText:
//
// The drive cannot be cleaned or does not support cleaning.
//
#define
ERROR_UNABLE_TO_CLEAN
4311L
//
// MessageId: ERROR_OBJECT_NOT_FOUND
//
// MessageText:
//
// The object identifier does not represent a valid object.
//
#define
ERROR_OBJECT_NOT_FOUND
4312L
//
// MessageId: ERROR_DATABASE_FAILURE
//
// MessageText:
//
// Unable to read from or write to the database.
//
#define
ERROR_DATABASE_FAILURE
4313L
//
// MessageId: ERROR_DATABASE_FULL
//
// MessageText:
//
// The database is full.
//
#define
ERROR_DATABASE_FULL
4314L
//
// MessageId: ERROR_MEDIA_INCOMPATIBLE
//
// MessageText:
//
// The medium is not compatible with the device or media pool.
//
#define
ERROR_MEDIA_INCOMPATIBLE
4315L
//
// MessageId: ERROR_RESOURCE_NOT_PRESENT
//
// MessageText:
//
// The resource required for this operation does not exist.
//
#define
ERROR_RESOURCE_NOT_PRESENT
4316L
//
// MessageId: ERROR_INVALID_OPERATION
//
// MessageText:
//
// The operation identifier is not valid.
//
#define
ERROR_INVALID_OPERATION
4317L
//
// MessageId: ERROR_MEDIA_NOT_AVAILABLE
//
// MessageText:
//
// The media is not mounted or ready for use.
//
#define
ERROR_MEDIA_NOT_AVAILABLE
4318L
//
// MessageId: ERROR_DEVICE_NOT_AVAILABLE
//
// MessageText:
//
// The device is not ready for use.
//
#define
ERROR_DEVICE_NOT_AVAILABLE
4319L
//
// MessageId: ERROR_REQUEST_REFUSED
//
// MessageText:
//
// The operator or administrator has refused the request.
//
#define
ERROR_REQUEST_REFUSED
4320L
//
// MessageId: ERROR_INVALID_DRIVE_OBJECT
//
// MessageText:
//
// The drive identifier does not represent a valid drive.
//
#define
ERROR_INVALID_DRIVE_OBJECT
4321L
//
// MessageId: ERROR_LIBRARY_FULL
//
// MessageText:
//
// Library is full. No slot is available for use.
//
#define
ERROR_LIBRARY_FULL
4322L
//
// MessageId: ERROR_MEDIUM_NOT_ACCESSIBLE
//
// MessageText:
//
// The transport cannot access the medium.
//
#define
ERROR_MEDIUM_NOT_ACCESSIBLE
4323L
//
// MessageId: ERROR_UNABLE_TO_LOAD_MEDIUM
//
// MessageText:
//
// Unable to load the medium into the drive.
//
#define
ERROR_UNABLE_TO_LOAD_MEDIUM
4324L
//
// MessageId: ERROR_UNABLE_TO_INVENTORY_DRIVE
//
// MessageText:
//
// Unable to retrieve the drive status.
//
#define ERROR_UNABLE_TO_INVENTORY_DRIVE 4325L
//
// MessageId: ERROR_UNABLE_TO_INVENTORY_SLOT
//
// MessageText:
//
// Unable to retrieve the slot status.
//
#define ERROR_UNABLE_TO_INVENTORY_SLOT 4326L
//
// MessageId: ERROR_UNABLE_TO_INVENTORY_TRANSPORT
//
// MessageText:
//
// Unable to retrieve status about the transport.
//
#define ERROR_UNABLE_TO_INVENTORY_TRANSPORT 4327L
//
// MessageId: ERROR_TRANSPORT_FULL
//
// MessageText:
//
// Cannot use the transport because it is already in use.
//
#define
ERROR_TRANSPORT_FULL
4328L
//
// MessageId: ERROR_CONTROLLING_IEPORT
//
// MessageText:
//
// Unable to open or close the inject/eject port.
//
#define
ERROR_CONTROLLING_IEPORT
4329L
//
// MessageId: ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA
//
// MessageText:
//
// Unable to eject the medium because it is in a drive.
//
#define ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA 4330L
//
// MessageId: ERROR_CLEANER_SLOT_SET
//
// MessageText:
//
// A cleaner slot is already reserved.
//
#define
ERROR_CLEANER_SLOT_SET
4331L
//
// MessageId: ERROR_CLEANER_SLOT_NOT_SET
//
// MessageText:
//
// A cleaner slot is not reserved.
//
#define
ERROR_CLEANER_SLOT_NOT_SET
4332L
//
// MessageId: ERROR_CLEANER_CARTRIDGE_SPENT
//
// MessageText:
//
// The cleaner cartridge has performed the maximum number of drive
cleanings.
//
#define ERROR_CLEANER_CARTRIDGE_SPENT
4333L
//
// MessageId: ERROR_UNEXPECTED_OMID
//
// MessageText:
//
// Unexpected on-medium identifier.
//
#define
ERROR_UNEXPECTED_OMID
4334L
//
// MessageId: ERROR_CANT_DELETE_LAST_ITEM
//
// MessageText:
//
// The last remaining item in this group or resource cannot be deleted.
//
#define
ERROR_CANT_DELETE_LAST_ITEM
4335L
//
// MessageId: ERROR_MESSAGE_EXCEEDS_MAX_SIZE
//
// MessageText:
//
// The message provided exceeds the maximum size allowed for this
parameter.
//
#define ERROR_MESSAGE_EXCEEDS_MAX_SIZE 4336L
//
// MessageId: ERROR_VOLUME_CONTAINS_SYS_FILES
//
// MessageText:
//
// The volume contains system or paging files.
//
#define ERROR_VOLUME_CONTAINS_SYS_FILES 4337L
//
// MessageId: ERROR_INDIGENOUS_TYPE
//
// MessageText:
//
//
The media type cannot be removed from this library since at least one
drive in the library reports it can support this media type.
//
#define
ERROR_INDIGENOUS_TYPE
4338L
//
// MessageId: ERROR_NO_SUPPORTING_DRIVES
//
// MessageText:
//
// This offline media cannot be mounted on this system since no enabled
drives are present which can be used.
//
#define
ERROR_NO_SUPPORTING_DRIVES
4339L
//
// MessageId: ERROR_CLEANER_CARTRIDGE_INSTALLED
//
// MessageText:
//
// A cleaner cartridge is present in the tape library.
//
#define ERROR_CLEANER_CARTRIDGE_INSTALLED 4340L
//
// MessageId: ERROR_IEPORT_FULL
//
// MessageText:
//
// Cannot use the inject/eject port because it is not empty.
//
#define
ERROR_IEPORT_FULL
4341L
///////////////////////////////////////////////////
//
//
// Remote
Storage Service Error
codes //
//
//
//
4350 to
4389
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_FILE_OFFLINE
//
// MessageText:
//
// This file is currently not available for use on this computer.
//
#define
ERROR_FILE_OFFLINE
4350L
//
// MessageId: ERROR_REMOTE_STORAGE_NOT_ACTIVE
//
// MessageText:
//
// The remote storage service is not operational at this time.
//
#define ERROR_REMOTE_STORAGE_NOT_ACTIVE 4351L
//
// MessageId: ERROR_REMOTE_STORAGE_MEDIA_ERROR
//
// MessageText:
//
// The remote storage service encountered a media error.
//
#define ERROR_REMOTE_STORAGE_MEDIA_ERROR 4352L
///////////////////////////////////////////////////
//
//
//
Reparse Point Error
codes
//
//
//
//
4390 to
4399
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_NOT_A_REPARSE_POINT
//
// MessageText:
//
// The file or directory is not a reparse point.
//
#define
ERROR_NOT_A_REPARSE_POINT
4390L
//
// MessageId: ERROR_REPARSE_ATTRIBUTE_CONFLICT
//
// MessageText:
//
// The reparse point attribute cannot be set because it conflicts with
an existing attribute.
//
#define ERROR_REPARSE_ATTRIBUTE_CONFLICT 4391L
//
// MessageId: ERROR_INVALID_REPARSE_DATA
//
// MessageText:
//
// The data present in the reparse point buffer is invalid.
//
#define
ERROR_INVALID_REPARSE_DATA
4392L
//
// MessageId: ERROR_REPARSE_TAG_INVALID
//
// MessageText:
//
// The tag present in the reparse point buffer is invalid.
//
#define
ERROR_REPARSE_TAG_INVALID
4393L
//
// MessageId: ERROR_REPARSE_TAG_MISMATCH
//
// MessageText:
//
// There is a mismatch between the tag specified in the request and the
tag present in the reparse point.
//
//
#define
ERROR_REPARSE_TAG_MISMATCH
4394L
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
4400 to
4499
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
// Single Instance Store (SIS) Error
codes //
//
//
//
4500 to
4549
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_VOLUME_NOT_SIS_ENABLED
//
// MessageText:
//
// Single Instance Storage is not available on this volume.
//
#define
ERROR_VOLUME_NOT_SIS_ENABLED
4500L
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
4550 to
4599
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
Cluster Error
codes
//
//
//
//
5000 to
5999
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_DEPENDENT_RESOURCE_EXISTS
//
// MessageText:
//
// The operation cannot be completed because other resources are
dependent on this resource.
//
#define ERROR_DEPENDENT_RESOURCE_EXISTS 5001L
//
// MessageId: ERROR_DEPENDENCY_NOT_FOUND
//
// MessageText:
//
// The cluster resource dependency cannot be found.
//
#define
ERROR_DEPENDENCY_NOT_FOUND
5002L
//
// MessageId: ERROR_DEPENDENCY_ALREADY_EXISTS
//
// MessageText:
//
// The cluster resource cannot be made dependent on the specified
resource because it is already dependent.
//
#define ERROR_DEPENDENCY_ALREADY_EXISTS 5003L
//
// MessageId: ERROR_RESOURCE_NOT_ONLINE
//
// MessageText:
//
// The cluster resource is not online.
//
#define
ERROR_RESOURCE_NOT_ONLINE
5004L
//
// MessageId: ERROR_HOST_NODE_NOT_AVAILABLE
//
// MessageText:
//
// A cluster node is not available for this operation.
//
#define ERROR_HOST_NODE_NOT_AVAILABLE
5005L
//
// MessageId: ERROR_RESOURCE_NOT_AVAILABLE
//
// MessageText:
//
// The cluster resource is not available.
//
#define
ERROR_RESOURCE_NOT_AVAILABLE
5006L
//
// MessageId: ERROR_RESOURCE_NOT_FOUND
//
// MessageText:
//
// The cluster resource could not be found.
//
#define
ERROR_RESOURCE_NOT_FOUND
5007L
//
// MessageId: ERROR_SHUTDOWN_CLUSTER
//
// MessageText:
//
// The cluster is being shut down.
//
#define
ERROR_SHUTDOWN_CLUSTER
5008L
//
// MessageId: ERROR_CANT_EVICT_ACTIVE_NODE
//
// MessageText:
//
// A cluster node cannot be evicted from the cluster unless the node is
down or it is the last node.
//
#define
ERROR_CANT_EVICT_ACTIVE_NODE
5009L
//
// MessageId: ERROR_OBJECT_ALREADY_EXISTS
//
// MessageText:
//
// The object already exists.
//
#define
ERROR_OBJECT_ALREADY_EXISTS
5010L
//
// MessageId: ERROR_OBJECT_IN_LIST
//
// MessageText:
//
// The object is already in the list.
//
#define
ERROR_OBJECT_IN_LIST
5011L
//
// MessageId: ERROR_GROUP_NOT_AVAILABLE
//
// MessageText:
//
// The cluster group is not available for any new requests.
//
#define
ERROR_GROUP_NOT_AVAILABLE
5012L
//
// MessageId: ERROR_GROUP_NOT_FOUND
//
// MessageText:
//
// The cluster group could not be found.
//
#define
ERROR_GROUP_NOT_FOUND
5013L
//
// MessageId: ERROR_GROUP_NOT_ONLINE
//
// MessageText:
//
// The operation could not be completed because the cluster group is
not online.
//
#define
ERROR_GROUP_NOT_ONLINE
5014L
//
// MessageId: ERROR_HOST_NODE_NOT_RESOURCE_OWNER
//
// MessageText:
//
//
The operation failed because either the specified cluster node is not
the owner of the resource, or the node is not a possible owner of the
resource.
//
#define ERROR_HOST_NODE_NOT_RESOURCE_OWNER 5015L
//
// MessageId: ERROR_HOST_NODE_NOT_GROUP_OWNER
//
// MessageText:
//
//
The operation failed because either the specified cluster node is not
the owner of the group, or the node is not a possible owner of the
group.
//
#define ERROR_HOST_NODE_NOT_GROUP_OWNER 5016L
//
// MessageId: ERROR_RESMON_CREATE_FAILED
//
// MessageText:
//
// The cluster resource could not be created in the specified resource
monitor.
//
#define
ERROR_RESMON_CREATE_FAILED
5017L
//
// MessageId: ERROR_RESMON_ONLINE_FAILED
//
// MessageText:
//
// The cluster resource could not be brought online by the resource
monitor.
//
#define
ERROR_RESMON_ONLINE_FAILED
5018L
//
// MessageId: ERROR_RESOURCE_ONLINE
//
// MessageText:
//
// The operation could not be completed because the cluster resource is
online.
//
#define
ERROR_RESOURCE_ONLINE
5019L
//
// MessageId: ERROR_QUORUM_RESOURCE
//
// MessageText:
//
// The cluster resource could not be deleted or brought offline because
it is the quorum resource.
//
#define
ERROR_QUORUM_RESOURCE
5020L
//
// MessageId: ERROR_NOT_QUORUM_CAPABLE
//
// MessageText:
//
// The cluster could not make the specified resource a quorum resource
because it is not capable of being a quorum resource.
//
#define
ERROR_NOT_QUORUM_CAPABLE
5021L
//
// MessageId: ERROR_CLUSTER_SHUTTING_DOWN
//
// MessageText:
//
// The cluster software is shutting down.
//
#define
ERROR_CLUSTER_SHUTTING_DOWN
5022L
//
// MessageId: ERROR_INVALID_STATE
//
// MessageText:
//
// The group or resource is not in the correct state to perform the
requested operation.
//
#define
ERROR_INVALID_STATE
5023L
//
// MessageId: ERROR_RESOURCE_PROPERTIES_STORED
//
// MessageText:
//
// The properties were stored but not all changes will take effect
until the next time the resource is brought online.
//
#define ERROR_RESOURCE_PROPERTIES_STORED 5024L
//
// MessageId: ERROR_NOT_QUORUM_CLASS
//
// MessageText:
//
// The cluster could not make the specified resource a quorum resource
because it does not belong to a shared storage class.
//
#define
ERROR_NOT_QUORUM_CLASS
5025L
//
// MessageId: ERROR_CORE_RESOURCE
//
// MessageText:
//
// The cluster resource could not be deleted since it is a core
resource.
//
#define
ERROR_CORE_RESOURCE
5026L
//
// MessageId: ERROR_QUORUM_RESOURCE_ONLINE_FAILED
//
// MessageText:
//
// The quorum resource failed to come online.
//
#define ERROR_QUORUM_RESOURCE_ONLINE_FAILED 5027L
//
// MessageId: ERROR_QUORUMLOG_OPEN_FAILED
//
// MessageText:
//
// The quorum log could not be created or mounted successfully.
//
#define
ERROR_QUORUMLOG_OPEN_FAILED
5028L
//
// MessageId: ERROR_CLUSTERLOG_CORRUPT
//
// MessageText:
//
// The cluster log is corrupt.
//
#define
ERROR_CLUSTERLOG_CORRUPT
5029L
//
// MessageId: ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE
//
// MessageText:
//
// The record could not be written to the cluster log since it exceeds
the maximum size.
//
#define ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE 5030L
//
// MessageId: ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE
//
// MessageText:
//
// The cluster log exceeds its maximum size.
//
#define ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE 5031L
//
// MessageId: ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND
//
// MessageText:
//
// No checkpoint record was found in the cluster log.
//
#define ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND 5032L
//
// MessageId: ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE
//
// MessageText:
//
// The minimum required disk space needed for logging is not available.
//
#define ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE 5033L
//
// MessageId: ERROR_QUORUM_OWNER_ALIVE
//
// MessageText:
//
// The cluster node failed to take control of the quorum resource
because the resource is owned by another active node.
//
#define
ERROR_QUORUM_OWNER_ALIVE
5034L
//
// MessageId: ERROR_NETWORK_NOT_AVAILABLE
//
// MessageText:
//
// A cluster network is not available for this operation.
//
#define
ERROR_NETWORK_NOT_AVAILABLE
5035L
//
// MessageId: ERROR_NODE_NOT_AVAILABLE
//
// MessageText:
//
// A cluster node is not available for this operation.
//
#define
ERROR_NODE_NOT_AVAILABLE
5036L
//
// MessageId: ERROR_ALL_NODES_NOT_AVAILABLE
//
// MessageText:
//
// All cluster nodes must be running to perform this operation.
//
#define ERROR_ALL_NODES_NOT_AVAILABLE
5037L
//
// MessageId: ERROR_RESOURCE_FAILED
//
// MessageText:
//
// A cluster resource failed.
//
#define
ERROR_RESOURCE_FAILED
5038L
//
// MessageId: ERROR_CLUSTER_INVALID_NODE
//
// MessageText:
//
// The cluster node is not valid.
//
#define
ERROR_CLUSTER_INVALID_NODE
5039L
//
// MessageId: ERROR_CLUSTER_NODE_EXISTS
//
// MessageText:
//
// The cluster node already exists.
//
#define
ERROR_CLUSTER_NODE_EXISTS
5040L
//
// MessageId: ERROR_CLUSTER_JOIN_IN_PROGRESS
//
// MessageText:
//
// A node is in the process of joining the cluster.
//
#define ERROR_CLUSTER_JOIN_IN_PROGRESS 5041L
//
// MessageId: ERROR_CLUSTER_NODE_NOT_FOUND
//
// MessageText:
//
// The cluster node was not found.
//
#define
ERROR_CLUSTER_NODE_NOT_FOUND
5042L
//
// MessageId: ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND
//
// MessageText:
//
// The cluster local node information was not found.
//
#define ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND 5043L
//
// MessageId: ERROR_CLUSTER_NETWORK_EXISTS
//
// MessageText:
//
// The cluster network already exists.
//
#define
ERROR_CLUSTER_NETWORK_EXISTS
5044L
//
// MessageId: ERROR_CLUSTER_NETWORK_NOT_FOUND
//
// MessageText:
//
// The cluster network was not found.
//
#define ERROR_CLUSTER_NETWORK_NOT_FOUND 5045L
//
// MessageId: ERROR_CLUSTER_NETINTERFACE_EXISTS
//
// MessageText:
//
// The cluster network interface already exists.
//
#define ERROR_CLUSTER_NETINTERFACE_EXISTS 5046L
//
// MessageId: ERROR_CLUSTER_NETINTERFACE_NOT_FOUND
//
// MessageText:
//
// The cluster network interface was not found.
//
#define ERROR_CLUSTER_NETINTERFACE_NOT_FOUND 5047L
//
// MessageId: ERROR_CLUSTER_INVALID_REQUEST
//
// MessageText:
//
// The cluster request is not valid for this object.
//
#define ERROR_CLUSTER_INVALID_REQUEST
5048L
//
// MessageId: ERROR_CLUSTER_INVALID_NETWORK_PROVIDER
//
// MessageText:
//
// The cluster network provider is not valid.
//
#define ERROR_CLUSTER_INVALID_NETWORK_PROVIDER 5049L
//
// MessageId: ERROR_CLUSTER_NODE_DOWN
//
// MessageText:
//
// The cluster node is down.
//
#define
ERROR_CLUSTER_NODE_DOWN
5050L
//
// MessageId: ERROR_CLUSTER_NODE_UNREACHABLE
//
// MessageText:
//
// The cluster node is not reachable.
//
#define ERROR_CLUSTER_NODE_UNREACHABLE 5051L
//
// MessageId: ERROR_CLUSTER_NODE_NOT_MEMBER
//
// MessageText:
//
// The cluster node is not a member of the cluster.
//
#define ERROR_CLUSTER_NODE_NOT_MEMBER
5052L
//
// MessageId: ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS
//
// MessageText:
//
// A cluster join operation is not in progress.
//
#define ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS 5053L
//
// MessageId: ERROR_CLUSTER_INVALID_NETWORK
//
// MessageText:
//
// The cluster network is not valid.
//
#define ERROR_CLUSTER_INVALID_NETWORK
5054L
//
// MessageId: ERROR_CLUSTER_NODE_UP
//
// MessageText:
//
// The cluster node is up.
//
#define
ERROR_CLUSTER_NODE_UP
5056L
//
// MessageId: ERROR_CLUSTER_IPADDR_IN_USE
//
// MessageText:
//
// The cluster IP address is already in use.
//
#define
ERROR_CLUSTER_IPADDR_IN_USE
5057L
//
// MessageId: ERROR_CLUSTER_NODE_NOT_PAUSED
//
// MessageText:
//
// The cluster node is not paused.
//
#define ERROR_CLUSTER_NODE_NOT_PAUSED
5058L
//
// MessageId: ERROR_CLUSTER_NO_SECURITY_CONTEXT
//
// MessageText:
//
// No cluster security context is available.
//
#define ERROR_CLUSTER_NO_SECURITY_CONTEXT 5059L
//
// MessageId: ERROR_CLUSTER_NETWORK_NOT_INTERNAL
//
// MessageText:
//
// The cluster network is not configured for internal cluster
communication.
//
#define ERROR_CLUSTER_NETWORK_NOT_INTERNAL 5060L
//
// MessageId: ERROR_CLUSTER_NODE_ALREADY_UP
//
// MessageText:
//
// The cluster node is already up.
//
#define ERROR_CLUSTER_NODE_ALREADY_UP
5061L
//
// MessageId: ERROR_CLUSTER_NODE_ALREADY_DOWN
//
// MessageText:
//
// The cluster node is already down.
//
#define ERROR_CLUSTER_NODE_ALREADY_DOWN 5062L
//
// MessageId: ERROR_CLUSTER_NETWORK_ALREADY_ONLINE
//
// MessageText:
//
// The cluster network is already online.
//
#define ERROR_CLUSTER_NETWORK_ALREADY_ONLINE 5063L
//
// MessageId: ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE
//
// MessageText:
//
// The cluster network is already offline.
//
#define ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE 5064L
//
// MessageId: ERROR_CLUSTER_NODE_ALREADY_MEMBER
//
// MessageText:
//
// The cluster node is already a member of the cluster.
//
#define ERROR_CLUSTER_NODE_ALREADY_MEMBER 5065L
//
// MessageId: ERROR_CLUSTER_LAST_INTERNAL_NETWORK
//
// MessageText:
//
//
The cluster network is the only one configured for internal cluster
communication between two or more active cluster nodes. The internal
communication capability cannot be removed from the network.
//
#define ERROR_CLUSTER_LAST_INTERNAL_NETWORK 5066L
//
// MessageId: ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS
//
// MessageText:
//
//
One or more cluster resources depend on the network to provide service
to clients. The client access capability cannot be removed from the
network.
//
#define ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS 5067L
//
// MessageId: ERROR_INVALID_OPERATION_ON_QUORUM
//
// MessageText:
//
//
This operation cannot be performed on the cluster resource as it the
quorum resource. You may not bring the quorum resource offline or
modify its possible owners list.
//
#define ERROR_INVALID_OPERATION_ON_QUORUM 5068L
//
// MessageId: ERROR_DEPENDENCY_NOT_ALLOWED
//
// MessageText:
//
// The cluster quorum resource is not allowed to have any dependencies.
//
#define
ERROR_DEPENDENCY_NOT_ALLOWED
5069L
//
// MessageId: ERROR_CLUSTER_NODE_PAUSED
//
// MessageText:
//
// The cluster node is paused.
//
#define
ERROR_CLUSTER_NODE_PAUSED
5070L
//
// MessageId: ERROR_NODE_CANT_HOST_RESOURCE
//
// MessageText:
//
// The cluster resource cannot be brought online. The owner node cannot
run this resource.
//
#define ERROR_NODE_CANT_HOST_RESOURCE
5071L
//
// MessageId: ERROR_CLUSTER_NODE_NOT_READY
//
// MessageText:
//
// The cluster node is not ready to perform the requested operation.
//
#define
ERROR_CLUSTER_NODE_NOT_READY
5072L
//
// MessageId: ERROR_CLUSTER_NODE_SHUTTING_DOWN
//
// MessageText:
//
// The cluster node is shutting down.
//
#define ERROR_CLUSTER_NODE_SHUTTING_DOWN 5073L
//
// MessageId: ERROR_CLUSTER_JOIN_ABORTED
//
// MessageText:
//
// The cluster join operation was aborted.
//
#define
ERROR_CLUSTER_JOIN_ABORTED
5074L
//
// MessageId: ERROR_CLUSTER_INCOMPATIBLE_VERSIONS
//
// MessageText:
//
// The cluster join operation failed due to incompatible software
versions between the joining node and its sponsor.
//
#define ERROR_CLUSTER_INCOMPATIBLE_VERSIONS 5075L
//
// MessageId: ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED
//
// MessageText:
//
// This resource cannot be created because the cluster has reached the
limit on the number of resources it can monitor.
//
#define ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED 5076L
//
// MessageId: ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED
//
// MessageText:
//
// The system configuration changed during the cluster join or form
operation. The join or form operation was aborted.
//
#define ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED 5077L
//
// MessageId: ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND
//
// MessageText:
//
// The specified resource type was not found.
//
#define ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND 5078L
//
// MessageId: ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED
//
// MessageText:
//
//
The specified node does not support a resource of this type. This may
be due to version inconsistencies or due to the absence of the resource
DLL on this node.
//
#define ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED 5079L
//
// MessageId: ERROR_CLUSTER_RESNAME_NOT_FOUND
//
// MessageText:
//
//
The specified resource name is not supported by this resource DLL. This
may be due to a bad (or changed) name supplied to the resource DLL.
//
#define ERROR_CLUSTER_RESNAME_NOT_FOUND 5080L
//
// MessageId: ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED
//
// MessageText:
//
// No authentication package could be registered with the RPC server.
//
#define ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED 5081L
//
// MessageId: ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST
//
// MessageText:
//
//
You cannot bring the group online because the owner of the group is not
in the preferred list for the group. To change the owner node for the
group, move the group.
//
#define ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST 5082L
//
// MessageId: ERROR_CLUSTER_DATABASE_SEQMISMATCH
//
// MessageText:
//
//
The join operation failed because the cluster database sequence number
has changed or is incompatible with the locker node. This may happen
during a join operation if the cluster database was changing during the
join.
//
#define ERROR_CLUSTER_DATABASE_SEQMISMATCH 5083L
//
// MessageId: ERROR_RESMON_INVALID_STATE
//
// MessageText:
//
//
The resource monitor will not allow the fail operation to be performed
while the resource is in its current state. This may happen if the
resource is in a pending state.
//
#define
ERROR_RESMON_INVALID_STATE
5084L
//
// MessageId: ERROR_CLUSTER_GUM_NOT_LOCKER
//
// MessageText:
//
// A non locker code got a request to reserve the lock for making
global updates.
//
#define
ERROR_CLUSTER_GUM_NOT_LOCKER
5085L
//
// MessageId: ERROR_QUORUM_DISK_NOT_FOUND
//
// MessageText:
//
// The quorum disk could not be located by the cluster service.
//
#define
ERROR_QUORUM_DISK_NOT_FOUND
5086L
//
// MessageId: ERROR_DATABASE_BACKUP_CORRUPT
//
// MessageText:
//
// The backed up cluster database is possibly corrupt.
//
#define ERROR_DATABASE_BACKUP_CORRUPT
5087L
//
// MessageId: ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT
//
// MessageText:
//
// A DFS root already exists in this cluster node.
//
#define ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT 5088L
//
// MessageId: ERROR_RESOURCE_PROPERTY_UNCHANGEABLE
//
// MessageText:
//
// An attempt to modify a resource property failed because it conflicts
with another existing property.
//
#define ERROR_RESOURCE_PROPERTY_UNCHANGEABLE 5089L
/*
Codes from 4300 through 5889 overlap with codes in
ds\published\inc\apperr2.w.
Do not add any more error codes in that range.
*/
//
// MessageId: ERROR_CLUSTER_MEMBERSHIP_INVALID_STATE
//
// MessageText:
//
// An operation was attempted that is incompatible with the current
membership state of the node.
//
#define ERROR_CLUSTER_MEMBERSHIP_INVALID_STATE 5890L
//
// MessageId: ERROR_CLUSTER_QUORUMLOG_NOT_FOUND
//
// MessageText:
//
// The quorum resource does not contain the quorum log.
//
#define ERROR_CLUSTER_QUORUMLOG_NOT_FOUND 5891L
//
// MessageId: ERROR_CLUSTER_MEMBERSHIP_HALT
//
// MessageText:
//
// The membership engine requested shutdown of the cluster service on
this node.
//
#define ERROR_CLUSTER_MEMBERSHIP_HALT
5892L
//
// MessageId: ERROR_CLUSTER_INSTANCE_ID_MISMATCH
//
// MessageText:
//
//
The join operation failed because the cluster instance ID of the
joining node does not match the cluster instance ID of the sponsor node.
//
#define ERROR_CLUSTER_INSTANCE_ID_MISMATCH 5893L
//
// MessageId: ERROR_CLUSTER_NETWORK_NOT_FOUND_FOR_IP
//
// MessageText:
//
// A matching cluster network for the specified IP address could not be
found.
//
#define ERROR_CLUSTER_NETWORK_NOT_FOUND_FOR_IP 5894L
//
// MessageId: ERROR_CLUSTER_PROPERTY_DATA_TYPE_MISMATCH
//
// MessageText:
//
// The actual data type of the property did not match the expected data
type of the property.
//
#define ERROR_CLUSTER_PROPERTY_DATA_TYPE_MISMATCH 5895L
//
// MessageId: ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP
//
// MessageText:
//
//
The cluster node was evicted from the cluster successfully, but the
node was not cleaned up. To determine what cleanup steps failed and how
to recover, see the Failover Clustering application event log using
Event Viewer.
//
#define ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP 5896L
//
// MessageId: ERROR_CLUSTER_PARAMETER_MISMATCH
//
// MessageText:
//
// Two or more parameter values specified for a resource's properties
are in conflict.
//
#define ERROR_CLUSTER_PARAMETER_MISMATCH 5897L
//
// MessageId: ERROR_NODE_CANNOT_BE_CLUSTERED
//
// MessageText:
//
// This computer cannot be made a member of a cluster.
//
#define ERROR_NODE_CANNOT_BE_CLUSTERED 5898L
//
// MessageId: ERROR_CLUSTER_WRONG_OS_VERSION
//
// MessageText:
//
// This computer cannot be made a member of a cluster because it does
not have the correct version of Windows installed.
//
#define ERROR_CLUSTER_WRONG_OS_VERSION 5899L
//
// MessageId: ERROR_CLUSTER_CANT_CREATE_DUP_CLUSTER_NAME
//
// MessageText:
//
//
A cluster cannot be created with the specified cluster name because
that cluster name is already in use. Specify a different name for the
cluster.
//
#define ERROR_CLUSTER_CANT_CREATE_DUP_CLUSTER_NAME 5900L
//
// MessageId: ERROR_CLUSCFG_ALREADY_COMMITTED
//
// MessageText:
//
// The cluster configuration action has already been committed.
//
#define ERROR_CLUSCFG_ALREADY_COMMITTED 5901L
//
// MessageId: ERROR_CLUSCFG_ROLLBACK_FAILED
//
// MessageText:
//
// The cluster configuration action could not be rolled back.
//
#define ERROR_CLUSCFG_ROLLBACK_FAILED
5902L
//
// MessageId: ERROR_CLUSCFG_SYSTEM_DISK_DRIVE_LETTER_CONFLICT
//
// MessageText:
//
// The drive letter assigned to a system disk on one node conflicted
with the drive letter assigned to a disk on another node.
//
#define ERROR_CLUSCFG_SYSTEM_DISK_DRIVE_LETTER_CONFLICT 5903L
//
// MessageId: ERROR_CLUSTER_OLD_VERSION
//
// MessageText:
//
// One or more nodes in the cluster are running a version of Windows
that does not support this operation.
//
#define
ERROR_CLUSTER_OLD_VERSION
5904L
//
// MessageId: ERROR_CLUSTER_MISMATCHED_COMPUTER_ACCT_NAME
//
// MessageText:
//
// The name of the corresponding computer account doesn't match the
Network Name for this resource.
//
#define ERROR_CLUSTER_MISMATCHED_COMPUTER_ACCT_NAME 5905L
//
// MessageId: ERROR_CLUSTER_NO_NET_ADAPTERS
//
// MessageText:
//
// No network adapters are available.
//
#define ERROR_CLUSTER_NO_NET_ADAPTERS
5906L
//
// MessageId: ERROR_CLUSTER_POISONED
//
// MessageText:
//
// The cluster node has been poisoned.
//
#define
ERROR_CLUSTER_POISONED
5907L
//
// MessageId: ERROR_CLUSTER_GROUP_MOVING
//
// MessageText:
//
// The group is unable to accept the request since it is moving to
another node.
//
#define
ERROR_CLUSTER_GROUP_MOVING
5908L
//
// MessageId: ERROR_CLUSTER_RESOURCE_TYPE_BUSY
//
// MessageText:
//
// The resource type cannot accept the request since is too busy
performing another operation.
//
#define ERROR_CLUSTER_RESOURCE_TYPE_BUSY 5909L
//
// MessageId: ERROR_RESOURCE_CALL_TIMED_OUT
//
// MessageText:
//
// The call to the cluster resource DLL timed out.
//
#define ERROR_RESOURCE_CALL_TIMED_OUT
5910L
//
// MessageId: ERROR_INVALID_CLUSTER_IPV6_ADDRESS
//
// MessageText:
//
//
The address is not valid for an IPv6 Address resource. A global IPv6
address is required, and it must match a cluster network. Compatibility
addresses are not permitted.
//
#define ERROR_INVALID_CLUSTER_IPV6_ADDRESS 5911L
//
// MessageId: ERROR_CLUSTER_INTERNAL_INVALID_FUNCTION
//
// MessageText:
//
// An internal cluster error occurred. A call to an invalid function
was attempted.
//
#define ERROR_CLUSTER_INTERNAL_INVALID_FUNCTION 5912L
//
// MessageId: ERROR_CLUSTER_PARAMETER_OUT_OF_BOUNDS
//
// MessageText:
//
// A parameter value is out of acceptable range.
//
#define ERROR_CLUSTER_PARAMETER_OUT_OF_BOUNDS 5913L
//
// MessageId: ERROR_CLUSTER_PARTIAL_SEND
//
// MessageText:
//
//
A network error occurred while sending data to another node in the
cluster. The number of bytes transmitted was less than required.
//
#define
ERROR_CLUSTER_PARTIAL_SEND
5914L
//
// MessageId: ERROR_CLUSTER_REGISTRY_INVALID_FUNCTION
//
// MessageText:
//
// An invalid cluster registry operation was attempted.
//
#define ERROR_CLUSTER_REGISTRY_INVALID_FUNCTION 5915L
//
// MessageId: ERROR_CLUSTER_INVALID_STRING_TERMINATION
//
// MessageText:
//
// An input string of characters is not properly terminated.
//
#define ERROR_CLUSTER_INVALID_STRING_TERMINATION 5916L
//
// MessageId: ERROR_CLUSTER_INVALID_STRING_FORMAT
//
// MessageText:
//
// An input string of characters is not in a valid format for the data
it represents.
//
#define ERROR_CLUSTER_INVALID_STRING_FORMAT 5917L
//
// MessageId: ERROR_CLUSTER_DATABASE_TRANSACTION_IN_PROGRESS
//
// MessageText:
//
// An internal cluster error occurred. A cluster database transaction
was attempted while a transaction was already in progress.
//
#define ERROR_CLUSTER_DATABASE_TRANSACTION_IN_PROGRESS 5918L
//
// MessageId: ERROR_CLUSTER_DATABASE_TRANSACTION_NOT_IN_PROGRESS
//
// MessageText:
//
//
An internal cluster error occurred. There was an attempt to commit a
cluster database transaction while no transaction was in progress.
//
#define ERROR_CLUSTER_DATABASE_TRANSACTION_NOT_IN_PROGRESS 5919L
//
// MessageId: ERROR_CLUSTER_NULL_DATA
//
// MessageText:
//
// An internal cluster error occurred. Data was not properly
initialized.
//
#define
ERROR_CLUSTER_NULL_DATA
5920L
//
// MessageId: ERROR_CLUSTER_PARTIAL_READ
//
// MessageText:
//
// An error occurred while reading from a stream of data. An unexpected
number of bytes was returned.
//
#define
ERROR_CLUSTER_PARTIAL_READ
5921L
//
// MessageId: ERROR_CLUSTER_PARTIAL_WRITE
//
// MessageText:
//
// An error occurred while writing to a stream of data. The required
number of bytes could not be written.
//
#define
ERROR_CLUSTER_PARTIAL_WRITE
5922L
//
// MessageId: ERROR_CLUSTER_CANT_DESERIALIZE_DATA
//
// MessageText:
//
// An error occurred while deserializing a stream of cluster data.
//
#define ERROR_CLUSTER_CANT_DESERIALIZE_DATA 5923L
//
// MessageId: ERROR_DEPENDENT_RESOURCE_PROPERTY_CONFLICT
//
// MessageText:
//
//
One or more property values for this resource are in conflict with one
or more property values associated with its dependent resource(s).
//
#define ERROR_DEPENDENT_RESOURCE_PROPERTY_CONFLICT 5924L
//
// MessageId: ERROR_CLUSTER_NO_QUORUM
//
// MessageText:
//
// A quorum of cluster nodes was not present to form a cluster.
//
#define
ERROR_CLUSTER_NO_QUORUM
5925L
//
// MessageId: ERROR_CLUSTER_INVALID_IPV6_NETWORK
//
// MessageText:
//
// The cluster network is not valid for an IPv6 Address resource, or it
does not match the configured address.
//
#define ERROR_CLUSTER_INVALID_IPV6_NETWORK 5926L
//
// MessageId: ERROR_CLUSTER_INVALID_IPV6_TUNNEL_NETWORK
//
// MessageText:
//
//
The cluster network is not valid for an IPv6 Tunnel resource. Check the
configuration of the IP Address resource on which the IPv6 Tunnel
resource depends.
//
#define ERROR_CLUSTER_INVALID_IPV6_TUNNEL_NETWORK 5927L
//
// MessageId: ERROR_QUORUM_NOT_ALLOWED_IN_THIS_GROUP
//
// MessageText:
//
// Quorum resource cannot reside in the Available Storage group.
//
#define ERROR_QUORUM_NOT_ALLOWED_IN_THIS_GROUP 5928L
//
// MessageId: ERROR_DEPENDENCY_TREE_TOO_COMPLEX
//
// MessageText:
//
// The dependencies for this resource are nested too deeply.
//
#define ERROR_DEPENDENCY_TREE_TOO_COMPLEX 5929L
//
// MessageId: ERROR_EXCEPTION_IN_RESOURCE_CALL
//
// MessageText:
//
// The call into the resource DLL raised an unhandled exception.
//
#define ERROR_EXCEPTION_IN_RESOURCE_CALL 5930L
//
// MessageId: ERROR_CLUSTER_RHS_FAILED_INITIALIZATION
//
// MessageText:
//
// The RHS process failed to initialize.
//
#define ERROR_CLUSTER_RHS_FAILED_INITIALIZATION 5931L
//
// MessageId: ERROR_CLUSTER_NOT_INSTALLED
//
// MessageText:
//
// The Failover Clustering feature is not installed on this node.
//
#define
ERROR_CLUSTER_NOT_INSTALLED
5932L
//
// MessageId: ERROR_CLUSTER_RESOURCES_MUST_BE_ONLINE_ON_THE_SAME_NODE
//
// MessageText:
//
// The resources must be online on the same node for this operation
//
#define ERROR_CLUSTER_RESOURCES_MUST_BE_ONLINE_ON_THE_SAME_NODE 5933L
//
// MessageId: ERROR_CLUSTER_MAX_NODES_IN_CLUSTER
//
// MessageText:
//
// A new node can not be added since this cluster is already at its
maximum number of nodes.
//
#define ERROR_CLUSTER_MAX_NODES_IN_CLUSTER 5934L
//
// MessageId: ERROR_CLUSTER_TOO_MANY_NODES
//
// MessageText:
//
// This cluster can not be created since the specified number of nodes
exceeds the maximum allowed limit.
//
#define
ERROR_CLUSTER_TOO_MANY_NODES
5935L
//
// MessageId: ERROR_CLUSTER_OBJECT_ALREADY_USED
//
// MessageText:
//
//
An attempt to use the specified cluster name failed because an enabled
computer object with the given name already exists in the domain.
//
#define ERROR_CLUSTER_OBJECT_ALREADY_USED 5936L
//
// MessageId: ERROR_NONCORE_GROUPS_FOUND
//
// MessageText:
//
//
This cluster cannot be destroyed. It has non-core application groups
which must be deleted before the cluster can be destroyed.
//
#define
ERROR_NONCORE_GROUPS_FOUND
5937L
//
// MessageId: ERROR_FILE_SHARE_RESOURCE_CONFLICT
//
// MessageText:
//
// File share associated with file share witness resource cannot be
hosted by this cluster or any of its nodes.
//
#define ERROR_FILE_SHARE_RESOURCE_CONFLICT 5938L
//
// MessageId: ERROR_CLUSTER_EVICT_INVALID_REQUEST
//
// MessageText:
//
// Eviction of this node is invalid at this time. Due to quorum
requirements node eviction will result in cluster shutdown.
// If it is the last node in the cluster, destroy cluster command
should be used.
//
#define ERROR_CLUSTER_EVICT_INVALID_REQUEST 5939L
//
// MessageId: ERROR_CLUSTER_SINGLETON_RESOURCE
//
// MessageText:
//
// Only one instance of this resource type is allowed in the cluster.
//
#define ERROR_CLUSTER_SINGLETON_RESOURCE 5940L
//
// MessageId: ERROR_CLUSTER_GROUP_SINGLETON_RESOURCE
//
// MessageText:
//
// Only one instance of this resource type is allowed per resource
group.
//
#define ERROR_CLUSTER_GROUP_SINGLETON_RESOURCE 5941L
//
// MessageId: ERROR_CLUSTER_RESOURCE_PROVIDER_FAILED
//
// MessageText:
//
// The resource failed to come online due to the failure of one or more
provider resources.
//
#define ERROR_CLUSTER_RESOURCE_PROVIDER_FAILED 5942L
//
// MessageId: ERROR_CLUSTER_RESOURCE_CONFIGURATION_ERROR
//
// MessageText:
//
// The resource has indicated that it cannot come online on any node.
//
#define ERROR_CLUSTER_RESOURCE_CONFIGURATION_ERROR 5943L
//
// MessageId: ERROR_CLUSTER_GROUP_BUSY
//
// MessageText:
//
// The current operation cannot be performed on this group at this time.
//
#define
ERROR_CLUSTER_GROUP_BUSY
5944L
//
// MessageId: ERROR_CLUSTER_NOT_SHARED_VOLUME
//
// MessageText:
//
// The directory or file is not located on a cluster shared volume.
//
#define ERROR_CLUSTER_NOT_SHARED_VOLUME 5945L
//
// MessageId: ERROR_CLUSTER_INVALID_SECURITY_DESCRIPTOR
//
// MessageText:
//
// The Security Descriptor does not meet the requirements for a cluster.
//
#define ERROR_CLUSTER_INVALID_SECURITY_DESCRIPTOR 5946L
//
// MessageId: ERROR_CLUSTER_SHARED_VOLUMES_IN_USE
//
// MessageText:
//
// There is one or more shared volumes resources configured in the
cluster.
// Those resources must be moved to available storage in order for
operation to succeed.
//
#define ERROR_CLUSTER_SHARED_VOLUMES_IN_USE 5947L
//
// MessageId: ERROR_CLUSTER_USE_SHARED_VOLUMES_API
//
// MessageText:
//
// This group or resource cannot be directly manipulated.
// Use shared volume APIs to perform desired operation.
//
#define ERROR_CLUSTER_USE_SHARED_VOLUMES_API 5948L
//
// MessageId: ERROR_CLUSTER_BACKUP_IN_PROGRESS
//
// MessageText:
//
// Back up is in progress. Please wait for backup completion before
trying this operation again.
//
#define ERROR_CLUSTER_BACKUP_IN_PROGRESS 5949L
//
// MessageId: ERROR_NON_CSV_PATH
//
// MessageText:
//
// The path does not belong to a cluster shared volume.
//
#define
ERROR_NON_CSV_PATH
5950L
//
// MessageId: ERROR_CSV_VOLUME_NOT_LOCAL
//
// MessageText:
//
// The cluster shared volume is not locally mounted on this node.
//
#define
ERROR_CSV_VOLUME_NOT_LOCAL
5951L
//
// MessageId: ERROR_CLUSTER_WATCHDOG_TERMINATING
//
// MessageText:
//
// The cluster watchdog is terminating.
//
#define ERROR_CLUSTER_WATCHDOG_TERMINATING 5952L
///////////////////////////////////////////////////
//
//
//
EFS Error
codes
//
//
//
//
6000 to
6099
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_ENCRYPTION_FAILED
//
// MessageText:
//
// The specified file could not be encrypted.
//
#define
ERROR_ENCRYPTION_FAILED
6000L
//
// MessageId: ERROR_DECRYPTION_FAILED
//
// MessageText:
//
// The specified file could not be decrypted.
//
#define
ERROR_DECRYPTION_FAILED
6001L
//
// MessageId: ERROR_FILE_ENCRYPTED
//
// MessageText:
//
// The specified file is encrypted and the user does not have the
ability to decrypt it.
//
#define
ERROR_FILE_ENCRYPTED
6002L
//
// MessageId: ERROR_NO_RECOVERY_POLICY
//
// MessageText:
//
// There is no valid encryption recovery policy configured for this
system.
//
#define
ERROR_NO_RECOVERY_POLICY
6003L
//
// MessageId: ERROR_NO_EFS
//
// MessageText:
//
// The required encryption driver is not loaded for this system.
//
#define
ERROR_NO_EFS
6004L
//
// MessageId: ERROR_WRONG_EFS
//
// MessageText:
//
// The file was encrypted with a different encryption driver than is
currently loaded.
//
#define
ERROR_WRONG_EFS
6005L
//
// MessageId: ERROR_NO_USER_KEYS
//
// MessageText:
//
// There are no EFS keys defined for the user.
//
#define
ERROR_NO_USER_KEYS
6006L
//
// MessageId: ERROR_FILE_NOT_ENCRYPTED
//
// MessageText:
//
// The specified file is not encrypted.
//
#define
ERROR_FILE_NOT_ENCRYPTED
6007L
//
// MessageId: ERROR_NOT_EXPORT_FORMAT
//
// MessageText:
//
// The specified file is not in the defined EFS export format.
//
#define
ERROR_NOT_EXPORT_FORMAT
6008L
//
// MessageId: ERROR_FILE_READ_ONLY
//
// MessageText:
//
// The specified file is read only.
//
#define
ERROR_FILE_READ_ONLY
6009L
//
// MessageId: ERROR_DIR_EFS_DISALLOWED
//
// MessageText:
//
// The directory has been disabled for encryption.
//
#define
ERROR_DIR_EFS_DISALLOWED
6010L
//
// MessageId: ERROR_EFS_SERVER_NOT_TRUSTED
//
// MessageText:
//
// The server is not trusted for remote encryption operation.
//
#define
ERROR_EFS_SERVER_NOT_TRUSTED
6011L
//
// MessageId: ERROR_BAD_RECOVERY_POLICY
//
// MessageText:
//
// Recovery policy configured for this system contains invalid recovery
certificate.
//
#define
ERROR_BAD_RECOVERY_POLICY
6012L
//
// MessageId: ERROR_EFS_ALG_BLOB_TOO_BIG
//
// MessageText:
//
// The encryption algorithm used on the source file needs a bigger key
buffer than the one on the destination file.
//
#define
ERROR_EFS_ALG_BLOB_TOO_BIG
6013L
//
// MessageId: ERROR_VOLUME_NOT_SUPPORT_EFS
//
// MessageText:
//
// The disk partition does not support file encryption.
//
#define
ERROR_VOLUME_NOT_SUPPORT_EFS
6014L
//
// MessageId: ERROR_EFS_DISABLED
//
// MessageText:
//
// This machine is disabled for file encryption.
//
#define
ERROR_EFS_DISABLED
6015L
//
// MessageId: ERROR_EFS_VERSION_NOT_SUPPORT
//
// MessageText:
//
// A newer system is required to decrypt this encrypted file.
//
#define ERROR_EFS_VERSION_NOT_SUPPORT
6016L
//
// MessageId: ERROR_CS_ENCRYPTION_INVALID_SERVER_RESPONSE
//
// MessageText:
//
// The remote server sent an invalid response for a file being opened
with Client Side Encryption.
//
#define ERROR_CS_ENCRYPTION_INVALID_SERVER_RESPONSE 6017L
//
// MessageId: ERROR_CS_ENCRYPTION_UNSUPPORTED_SERVER
//
// MessageText:
//
// Client Side Encryption is not supported by the remote server even
though it claims to support it.
//
#define ERROR_CS_ENCRYPTION_UNSUPPORTED_SERVER 6018L
//
// MessageId: ERROR_CS_ENCRYPTION_EXISTING_ENCRYPTED_FILE
//
// MessageText:
//
// File is encrypted and should be opened in Client Side Encryption
mode.
//
#define ERROR_CS_ENCRYPTION_EXISTING_ENCRYPTED_FILE 6019L
//
// MessageId: ERROR_CS_ENCRYPTION_NEW_ENCRYPTED_FILE
//
// MessageText:
//
// A new encrypted file is being created and a $EFS needs to be
provided.
//
#define ERROR_CS_ENCRYPTION_NEW_ENCRYPTED_FILE 6020L
//
// MessageId: ERROR_CS_ENCRYPTION_FILE_NOT_CSE
//
// MessageText:
//
// The SMB client requested a CSE FSCTL on a non-CSE file.
//
#define ERROR_CS_ENCRYPTION_FILE_NOT_CSE 6021L
//
// MessageId: ERROR_ENCRYPTION_POLICY_DENIES_OPERATION
//
// MessageText:
//
// The requested operation was blocked by policy. For more information,
contact your system administrator.
//
#define ERROR_ENCRYPTION_POLICY_DENIES_OPERATION 6022L
///////////////////////////////////////////////////
//
//
//
BROWSER Error
codes
//
//
//
//
6100 to
6199
//
///////////////////////////////////////////////////
//
This message number is for historical purposes and cannot be changed or
re-used.
//
// MessageId: ERROR_NO_BROWSER_SERVERS_FOUND
//
// MessageText:
//
// The list of servers for this workgroup is not currently available
//
#define ERROR_NO_BROWSER_SERVERS_FOUND 6118L
///////////////////////////////////////////////////
//
//
//
Task Scheduler Error
codes
//
//
NET START must
understand
//
//
//
//
6200 to
6249
//
///////////////////////////////////////////////////
//
// MessageId: SCHED_E_SERVICE_NOT_LOCALSYSTEM
//
// MessageText:
//
//
The Task Scheduler service must be configured to run in the System
account to function properly. Individual tasks may be configured to run
in other accounts.
//
#define SCHED_E_SERVICE_NOT_LOCALSYSTEM 6200L
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
6250 to
6599
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
Common Log
(CLFS) Error
codes
//
//
//
//
6600 to
6699
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_LOG_SECTOR_INVALID
//
// MessageText:
//
// Log service encountered an invalid log sector.
//
#define
ERROR_LOG_SECTOR_INVALID
6600L
//
// MessageId: ERROR_LOG_SECTOR_PARITY_INVALID
//
// MessageText:
//
// Log service encountered a log sector with invalid block parity.
//
#define ERROR_LOG_SECTOR_PARITY_INVALID 6601L
//
// MessageId: ERROR_LOG_SECTOR_REMAPPED
//
// MessageText:
//
// Log service encountered a remapped log sector.
//
#define
ERROR_LOG_SECTOR_REMAPPED
6602L
//
// MessageId: ERROR_LOG_BLOCK_INCOMPLETE
//
// MessageText:
//
// Log service encountered a partial or incomplete log block.
//
#define
ERROR_LOG_BLOCK_INCOMPLETE
6603L
//
// MessageId: ERROR_LOG_INVALID_RANGE
//
// MessageText:
//
// Log service encountered an attempt access data outside the active
log range.
//
#define
ERROR_LOG_INVALID_RANGE
6604L
//
// MessageId: ERROR_LOG_BLOCKS_EXHAUSTED
//
// MessageText:
//
// Log service user marshalling buffers are exhausted.
//
#define
ERROR_LOG_BLOCKS_EXHAUSTED
6605L
//
// MessageId: ERROR_LOG_READ_CONTEXT_INVALID
//
// MessageText:
//
// Log service encountered an attempt read from a marshalling area with
an invalid read context.
//
#define ERROR_LOG_READ_CONTEXT_INVALID 6606L
//
// MessageId: ERROR_LOG_RESTART_INVALID
//
// MessageText:
//
// Log service encountered an invalid log restart area.
//
#define
ERROR_LOG_RESTART_INVALID
6607L
//
// MessageId: ERROR_LOG_BLOCK_VERSION
//
// MessageText:
//
// Log service encountered an invalid log block version.
//
#define
ERROR_LOG_BLOCK_VERSION
6608L
//
// MessageId: ERROR_LOG_BLOCK_INVALID
//
// MessageText:
//
// Log service encountered an invalid log block.
//
#define
ERROR_LOG_BLOCK_INVALID
6609L
//
// MessageId: ERROR_LOG_READ_MODE_INVALID
//
// MessageText:
//
// Log service encountered an attempt to read the log with an invalid
read mode.
//
#define
ERROR_LOG_READ_MODE_INVALID
6610L
//
// MessageId: ERROR_LOG_NO_RESTART
//
// MessageText:
//
// Log service encountered a log stream with no restart area.
//
#define
ERROR_LOG_NO_RESTART
6611L
//
// MessageId: ERROR_LOG_METADATA_CORRUPT
//
// MessageText:
//
// Log service encountered a corrupted metadata file.
//
#define
ERROR_LOG_METADATA_CORRUPT
6612L
//
// MessageId: ERROR_LOG_METADATA_INVALID
//
// MessageText:
//
// Log service encountered a metadata file that could not be created by
the log file system.
//
#define
ERROR_LOG_METADATA_INVALID
6613L
//
// MessageId: ERROR_LOG_METADATA_INCONSISTENT
//
// MessageText:
//
// Log service encountered a metadata file with inconsistent data.
//
#define ERROR_LOG_METADATA_INCONSISTENT 6614L
//
// MessageId: ERROR_LOG_RESERVATION_INVALID
//
// MessageText:
//
// Log service encountered an attempt to erroneous allocate or dispose
reservation space.
//
#define ERROR_LOG_RESERVATION_INVALID
6615L
//
// MessageId: ERROR_LOG_CANT_DELETE
//
// MessageText:
//
// Log service cannot delete log file or file system container.
//
#define
ERROR_LOG_CANT_DELETE
6616L
//
// MessageId: ERROR_LOG_CONTAINER_LIMIT_EXCEEDED
//
// MessageText:
//
// Log service has reached the maximum allowable containers allocated
to a log file.
//
#define ERROR_LOG_CONTAINER_LIMIT_EXCEEDED 6617L
//
// MessageId: ERROR_LOG_START_OF_LOG
//
// MessageText:
//
// Log service has attempted to read or write backward past the start
of the log.
//
#define
ERROR_LOG_START_OF_LOG
6618L
//
// MessageId: ERROR_LOG_POLICY_ALREADY_INSTALLED
//
// MessageText:
//
// Log policy could not be installed because a policy of the same type
is already present.
//
#define ERROR_LOG_POLICY_ALREADY_INSTALLED 6619L
//
// MessageId: ERROR_LOG_POLICY_NOT_INSTALLED
//
// MessageText:
//
// Log policy in question was not installed at the time of the request.
//
#define ERROR_LOG_POLICY_NOT_INSTALLED 6620L
//
// MessageId: ERROR_LOG_POLICY_INVALID
//
// MessageText:
//
// The installed set of policies on the log is invalid.
//
#define
ERROR_LOG_POLICY_INVALID
6621L
//
// MessageId: ERROR_LOG_POLICY_CONFLICT
//
// MessageText:
//
// A policy on the log in question prevented the operation from
completing.
//
#define
ERROR_LOG_POLICY_CONFLICT
6622L
//
// MessageId: ERROR_LOG_PINNED_ARCHIVE_TAIL
//
// MessageText:
//
// Log space cannot be reclaimed because the log is pinned by the
archive tail.
//
#define ERROR_LOG_PINNED_ARCHIVE_TAIL
6623L
//
// MessageId: ERROR_LOG_RECORD_NONEXISTENT
//
// MessageText:
//
// Log record is not a record in the log file.
//
#define
ERROR_LOG_RECORD_NONEXISTENT
6624L
//
// MessageId: ERROR_LOG_RECORDS_RESERVED_INVALID
//
// MessageText:
//
// Number of reserved log records or the adjustment of the number of
reserved log records is invalid.
//
#define ERROR_LOG_RECORDS_RESERVED_INVALID 6625L
//
// MessageId: ERROR_LOG_SPACE_RESERVED_INVALID
//
// MessageText:
//
// Reserved log space or the adjustment of the log space is invalid.
//
#define ERROR_LOG_SPACE_RESERVED_INVALID 6626L
//
// MessageId: ERROR_LOG_TAIL_INVALID
//
// MessageText:
//
// An new or existing archive tail or base of the active log is invalid.
//
#define
ERROR_LOG_TAIL_INVALID
6627L
//
// MessageId: ERROR_LOG_FULL
//
// MessageText:
//
// Log space is exhausted.
//
#define
ERROR_LOG_FULL
6628L
//
// MessageId: ERROR_COULD_NOT_RESIZE_LOG
//
// MessageText:
//
// The log could not be set to the requested size.
//
#define
ERROR_COULD_NOT_RESIZE_LOG
6629L
//
// MessageId: ERROR_LOG_MULTIPLEXED
//
// MessageText:
//
// Log is multiplexed, no direct writes to the physical log is allowed.
//
#define
ERROR_LOG_MULTIPLEXED
6630L
//
// MessageId: ERROR_LOG_DEDICATED
//
// MessageText:
//
// The operation failed because the log is a dedicated log.
//
#define
ERROR_LOG_DEDICATED
6631L
//
// MessageId: ERROR_LOG_ARCHIVE_NOT_IN_PROGRESS
//
// MessageText:
//
// The operation requires an archive context.
//
#define ERROR_LOG_ARCHIVE_NOT_IN_PROGRESS 6632L
//
// MessageId: ERROR_LOG_ARCHIVE_IN_PROGRESS
//
// MessageText:
//
// Log archival is in progress.
//
#define ERROR_LOG_ARCHIVE_IN_PROGRESS
6633L
//
// MessageId: ERROR_LOG_EPHEMERAL
//
// MessageText:
//
// The operation requires a non-ephemeral log, but the log is ephemeral.
//
#define
ERROR_LOG_EPHEMERAL
6634L
//
// MessageId: ERROR_LOG_NOT_ENOUGH_CONTAINERS
//
// MessageText:
//
// The log must have at least two containers before it can be read from
or written to.
//
#define ERROR_LOG_NOT_ENOUGH_CONTAINERS 6635L
//
// MessageId: ERROR_LOG_CLIENT_ALREADY_REGISTERED
//
// MessageText:
//
// A log client has already registered on the stream.
//
#define ERROR_LOG_CLIENT_ALREADY_REGISTERED 6636L
//
// MessageId: ERROR_LOG_CLIENT_NOT_REGISTERED
//
// MessageText:
//
// A log client has not been registered on the stream.
//
#define ERROR_LOG_CLIENT_NOT_REGISTERED 6637L
//
// MessageId: ERROR_LOG_FULL_HANDLER_IN_PROGRESS
//
// MessageText:
//
// A request has already been made to handle the log full condition.
//
#define ERROR_LOG_FULL_HANDLER_IN_PROGRESS 6638L
//
// MessageId: ERROR_LOG_CONTAINER_READ_FAILED
//
// MessageText:
//
// Log service encountered an error when attempting to read from a log
container.
//
#define ERROR_LOG_CONTAINER_READ_FAILED 6639L
//
// MessageId: ERROR_LOG_CONTAINER_WRITE_FAILED
//
// MessageText:
//
// Log service encountered an error when attempting to write to a log
container.
//
#define ERROR_LOG_CONTAINER_WRITE_FAILED 6640L
//
// MessageId: ERROR_LOG_CONTAINER_OPEN_FAILED
//
// MessageText:
//
// Log service encountered an error when attempting open a log
container.
//
#define ERROR_LOG_CONTAINER_OPEN_FAILED 6641L
//
// MessageId: ERROR_LOG_CONTAINER_STATE_INVALID
//
// MessageText:
//
// Log service encountered an invalid container state when attempting a
requested action.
//
#define ERROR_LOG_CONTAINER_STATE_INVALID 6642L
//
// MessageId: ERROR_LOG_STATE_INVALID
//
// MessageText:
//
// Log service is not in the correct state to perform a requested
action.
//
#define
ERROR_LOG_STATE_INVALID
6643L
//
// MessageId: ERROR_LOG_PINNED
//
// MessageText:
//
// Log space cannot be reclaimed because the log is pinned.
//
#define
ERROR_LOG_PINNED
6644L
//
// MessageId: ERROR_LOG_METADATA_FLUSH_FAILED
//
// MessageText:
//
// Log metadata flush failed.
//
#define ERROR_LOG_METADATA_FLUSH_FAILED 6645L
//
// MessageId: ERROR_LOG_INCONSISTENT_SECURITY
//
// MessageText:
//
// Security on the log and its containers is inconsistent.
//
#define ERROR_LOG_INCONSISTENT_SECURITY 6646L
//
// MessageId: ERROR_LOG_APPENDED_FLUSH_FAILED
//
// MessageText:
//
// Records were appended to the log or reservation changes were made,
but the log could not be flushed.
//
#define ERROR_LOG_APPENDED_FLUSH_FAILED 6647L
//
// MessageId: ERROR_LOG_PINNED_RESERVATION
//
// MessageText:
//
// The log is pinned due to reservation consuming most of the log
space. Free some reserved records to make space available.
//
#define
ERROR_LOG_PINNED_RESERVATION
6648L
///////////////////////////////////////////////////
//
//
//
Transaction (KTM) Error
codes //
//
//
//
6700 to
6799
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_INVALID_TRANSACTION
//
// MessageText:
//
// The transaction handle associated with this operation is not valid.
//
#define
ERROR_INVALID_TRANSACTION
6700L
//
// MessageId: ERROR_TRANSACTION_NOT_ACTIVE
//
// MessageText:
//
// The requested operation was made in the context of a transaction
that is no longer active.
//
#define
ERROR_TRANSACTION_NOT_ACTIVE
6701L
//
// MessageId: ERROR_TRANSACTION_REQUEST_NOT_VALID
//
// MessageText:
//
// The requested operation is not valid on the Transaction object in
its current state.
//
#define ERROR_TRANSACTION_REQUEST_NOT_VALID 6702L
//
// MessageId: ERROR_TRANSACTION_NOT_REQUESTED
//
// MessageText:
//
//
The caller has called a response API, but the response is not expected
because the TM did not issue the corresponding request to the caller.
//
#define ERROR_TRANSACTION_NOT_REQUESTED 6703L
//
// MessageId: ERROR_TRANSACTION_ALREADY_ABORTED
//
// MessageText:
//
// It is too late to perform the requested operation, since the
Transaction has already been aborted.
//
#define ERROR_TRANSACTION_ALREADY_ABORTED 6704L
//
// MessageId: ERROR_TRANSACTION_ALREADY_COMMITTED
//
// MessageText:
//
// It is too late to perform the requested operation, since the
Transaction has already been committed.
//
#define ERROR_TRANSACTION_ALREADY_COMMITTED 6705L
//
// MessageId: ERROR_TM_INITIALIZATION_FAILED
//
// MessageText:
//
// The Transaction Manager was unable to be successfully initialized.
Transacted operations are not supported.
//
#define ERROR_TM_INITIALIZATION_FAILED 6706L
//
// MessageId: ERROR_RESOURCEMANAGER_READ_ONLY
//
// MessageText:
//
// The specified ResourceManager made no changes or updates to the
resource under this transaction.
//
#define ERROR_RESOURCEMANAGER_READ_ONLY 6707L
//
// MessageId: ERROR_TRANSACTION_NOT_JOINED
//
// MessageText:
//
// The resource manager has attempted to prepare a transaction that it
has not successfully joined.
//
#define
ERROR_TRANSACTION_NOT_JOINED
6708L
//
// MessageId: ERROR_TRANSACTION_SUPERIOR_EXISTS
//
// MessageText:
//
//
The Transaction object already has a superior enlistment, and the
caller attempted an operation that would have created a new superior.
Only a single superior enlistment is allow.
//
#define ERROR_TRANSACTION_SUPERIOR_EXISTS 6709L
//
// MessageId: ERROR_CRM_PROTOCOL_ALREADY_EXISTS
//
// MessageText:
//
// The RM tried to register a protocol that already exists.
//
#define ERROR_CRM_PROTOCOL_ALREADY_EXISTS 6710L
//
// MessageId: ERROR_TRANSACTION_PROPAGATION_FAILED
//
// MessageText:
//
// The attempt to propagate the Transaction failed.
//
#define ERROR_TRANSACTION_PROPAGATION_FAILED 6711L
//
// MessageId: ERROR_CRM_PROTOCOL_NOT_FOUND
//
// MessageText:
//
// The requested propagation protocol was not registered as a CRM.
//
#define
ERROR_CRM_PROTOCOL_NOT_FOUND
6712L
//
// MessageId: ERROR_TRANSACTION_INVALID_MARSHALL_BUFFER
//
// MessageText:
//
// The buffer passed in to PushTransaction or PullTransaction is not in
a valid format.
//
#define ERROR_TRANSACTION_INVALID_MARSHALL_BUFFER 6713L
//
// MessageId: ERROR_CURRENT_TRANSACTION_NOT_VALID
//
// MessageText:
//
// The current transaction context associated with the thread is not a
valid handle to a transaction object.
//
#define ERROR_CURRENT_TRANSACTION_NOT_VALID 6714L
//
// MessageId: ERROR_TRANSACTION_NOT_FOUND
//
// MessageText:
//
// The specified Transaction object could not be opened, because it was
not found.
//
#define
ERROR_TRANSACTION_NOT_FOUND
6715L
//
// MessageId: ERROR_RESOURCEMANAGER_NOT_FOUND
//
// MessageText:
//
// The specified ResourceManager object could not be opened, because it
was not found.
//
#define ERROR_RESOURCEMANAGER_NOT_FOUND 6716L
//
// MessageId: ERROR_ENLISTMENT_NOT_FOUND
//
// MessageText:
//
// The specified Enlistment object could not be opened, because it was
not found.
//
#define
ERROR_ENLISTMENT_NOT_FOUND
6717L
//
// MessageId: ERROR_TRANSACTIONMANAGER_NOT_FOUND
//
// MessageText:
//
// The specified TransactionManager object could not be opened, because
it was not found.
//
#define ERROR_TRANSACTIONMANAGER_NOT_FOUND 6718L
//
// MessageId: ERROR_TRANSACTIONMANAGER_NOT_ONLINE
//
// MessageText:
//
//
The object specified could not be created or opened, because its
associated TransactionManager is not online. The
TransactionManager must be brought fully Online by calling
RecoverTransactionManager to recover to the end of its LogFile before
objects in its Transaction or ResourceManager namespaces can be
opened. In addition, errors in writing records to its LogFile
can
cause a TransactionManager to go offline.
//
#define ERROR_TRANSACTIONMANAGER_NOT_ONLINE 6719L
//
// MessageId: ERROR_TRANSACTIONMANAGER_RECOVERY_NAME_COLLISION
//
// MessageText:
//
//
The specified TransactionManager was unable to create the objects
contained in its logfile in the Ob namespace. Therefore, the
TransactionManager was unable to recover.
//
#define ERROR_TRANSACTIONMANAGER_RECOVERY_NAME_COLLISION 6720L
//
// MessageId: ERROR_TRANSACTION_NOT_ROOT
//
// MessageText:
//
//
The call to create a superior Enlistment on this Transaction object
could not be completed, because the Transaction object specified for
the enlistment is a subordinate branch of the Transaction. Only the
root of the Transaction can be enlisted on as a superior.
//
#define
ERROR_TRANSACTION_NOT_ROOT
6721L
//
// MessageId: ERROR_TRANSACTION_OBJECT_EXPIRED
//
// MessageText:
//
// Because the associated transaction manager or resource manager has
been closed, the handle is no longer valid.
//
#define ERROR_TRANSACTION_OBJECT_EXPIRED 6722L
//
// MessageId: ERROR_TRANSACTION_RESPONSE_NOT_ENLISTED
//
// MessageText:
//
//
The specified operation could not be performed on this Superior
enlistment, because the enlistment was not created with the
corresponding completion response in the NotificationMask.
//
#define ERROR_TRANSACTION_RESPONSE_NOT_ENLISTED 6723L
//
// MessageId: ERROR_TRANSACTION_RECORD_TOO_LONG
//
// MessageText:
//
//
The specified operation could not be performed, because the record that
would be logged was too long. This can occur because of two conditions:
either there are too many Enlistments on this Transaction, or the
combined RecoveryInformation being logged on behalf of those
Enlistments is too long.
//
#define ERROR_TRANSACTION_RECORD_TOO_LONG 6724L
//
// MessageId: ERROR_IMPLICIT_TRANSACTION_NOT_SUPPORTED
//
// MessageText:
//
// Implicit transaction are not supported.
//
#define ERROR_IMPLICIT_TRANSACTION_NOT_SUPPORTED 6725L
//
// MessageId: ERROR_TRANSACTION_INTEGRITY_VIOLATED
//
// MessageText:
//
// The kernel transaction manager had to abort or forget the
transaction because it blocked forward progress.
//
#define ERROR_TRANSACTION_INTEGRITY_VIOLATED 6726L
//
// MessageId: ERROR_TRANSACTIONMANAGER_IDENTITY_MISMATCH
//
// MessageText:
//
// The TransactionManager identity that was supplied did not match the
one recorded in the TransactionManager's log file.
//
#define ERROR_TRANSACTIONMANAGER_IDENTITY_MISMATCH 6727L
//
// MessageId: ERROR_RM_CANNOT_BE_FROZEN_FOR_SNAPSHOT
//
// MessageText:
//
//
This snapshot operation cannot continue because a transactional
resource manager cannot be frozen in its current state.
Please
try again.
//
#define ERROR_RM_CANNOT_BE_FROZEN_FOR_SNAPSHOT 6728L
//
// MessageId: ERROR_TRANSACTION_MUST_WRITETHROUGH
//
// MessageText:
//
//
The transaction cannot be enlisted on with the specified
EnlistmentMask, because the transaction has already completed the
PrePrepare phase. In order to ensure correctness, the
ResourceManager must switch to a write-through mode and cease caching
data within this transaction. Enlisting for only subsequent
transaction phases may still succeed.
//
#define ERROR_TRANSACTION_MUST_WRITETHROUGH 6729L
//
// MessageId: ERROR_TRANSACTION_NO_SUPERIOR
//
// MessageText:
//
// The transaction does not have a superior enlistment.
//
#define ERROR_TRANSACTION_NO_SUPERIOR
6730L
//
// MessageId: ERROR_HEURISTIC_DAMAGE_POSSIBLE
//
// MessageText:
//
//
The attempt to commit the Transaction completed, but it is possible
that some portion of the transaction tree did not commit successfully
due to heuristics. Therefore it is possible that some data
modified in the transaction may not have committed, resulting in
transactional inconsistency. If possible, check the
consistency
of the associated data.
//
#define ERROR_HEURISTIC_DAMAGE_POSSIBLE 6731L
///////////////////////////////////////////////////
//
//
//
Transactional File Services
(TxF) //
//
Error
codes
//
//
//
//
6800 to
6899
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_TRANSACTIONAL_CONFLICT
//
// MessageText:
//
// The function attempted to use a name that is reserved for use by
another transaction.
//
#define
ERROR_TRANSACTIONAL_CONFLICT
6800L
//
// MessageId: ERROR_RM_NOT_ACTIVE
//
// MessageText:
//
// Transaction support within the specified resource manager is not
started or was shut down due to an error.
//
#define
ERROR_RM_NOT_ACTIVE
6801L
//
// MessageId: ERROR_RM_METADATA_CORRUPT
//
// MessageText:
//
// The metadata of the RM has been corrupted. The RM will not function.
//
#define
ERROR_RM_METADATA_CORRUPT
6802L
//
// MessageId: ERROR_DIRECTORY_NOT_RM
//
// MessageText:
//
// The specified directory does not contain a resource manager.
//
#define
ERROR_DIRECTORY_NOT_RM
6803L
//
// MessageId: ERROR_TRANSACTIONS_UNSUPPORTED_REMOTE
//
// MessageText:
//
// The remote server or share does not support transacted file
operations.
//
#define ERROR_TRANSACTIONS_UNSUPPORTED_REMOTE 6805L
//
// MessageId: ERROR_LOG_RESIZE_INVALID_SIZE
//
// MessageText:
//
// The requested log size is invalid.
//
#define ERROR_LOG_RESIZE_INVALID_SIZE
6806L
//
// MessageId: ERROR_OBJECT_NO_LONGER_EXISTS
//
// MessageText:
//
// The object (file, stream, link) corresponding to the handle has been
deleted by a Transaction Savepoint Rollback.
//
#define ERROR_OBJECT_NO_LONGER_EXISTS
6807L
//
// MessageId: ERROR_STREAM_MINIVERSION_NOT_FOUND
//
// MessageText:
//
// The specified file miniversion was not found for this transacted
file open.
//
#define ERROR_STREAM_MINIVERSION_NOT_FOUND 6808L
//
// MessageId: ERROR_STREAM_MINIVERSION_NOT_VALID
//
// MessageText:
//
// The specified file miniversion was found but has been invalidated.
Most likely cause is a transaction savepoint rollback.
//
#define ERROR_STREAM_MINIVERSION_NOT_VALID 6809L
//
// MessageId: ERROR_MINIVERSION_INACCESSIBLE_FROM_SPECIFIED_TRANSACTION
//
// MessageText:
//
// A miniversion may only be opened in the context of the transaction
that created it.
//
#define ERROR_MINIVERSION_INACCESSIBLE_FROM_SPECIFIED_TRANSACTION 6810L
//
// MessageId: ERROR_CANT_OPEN_MINIVERSION_WITH_MODIFY_INTENT
//
// MessageText:
//
// It is not possible to open a miniversion with modify access.
//
#define ERROR_CANT_OPEN_MINIVERSION_WITH_MODIFY_INTENT 6811L
//
// MessageId: ERROR_CANT_CREATE_MORE_STREAM_MINIVERSIONS
//
// MessageText:
//
// It is not possible to create any more miniversions for this stream.
//
#define ERROR_CANT_CREATE_MORE_STREAM_MINIVERSIONS 6812L
//
// MessageId: ERROR_REMOTE_FILE_VERSION_MISMATCH
//
// MessageText:
//
// The remote server sent mismatching version number or Fid for a file
opened with transactions.
//
#define ERROR_REMOTE_FILE_VERSION_MISMATCH 6814L
//
// MessageId: ERROR_HANDLE_NO_LONGER_VALID
//
// MessageText:
//
//
The handle has been invalidated by a transaction. The most likely cause
is the presence of memory mapping on a file or an open handle when the
transaction ended or rolled back to savepoint.
//
#define
ERROR_HANDLE_NO_LONGER_VALID
6815L
//
// MessageId: ERROR_NO_TXF_METADATA
//
// MessageText:
//
// There is no transaction metadata on the file.
//
#define
ERROR_NO_TXF_METADATA
6816L
//
// MessageId: ERROR_LOG_CORRUPTION_DETECTED
//
// MessageText:
//
// The log data is corrupt.
//
#define ERROR_LOG_CORRUPTION_DETECTED
6817L
//
// MessageId: ERROR_CANT_RECOVER_WITH_HANDLE_OPEN
//
// MessageText:
//
// The file can't be recovered because there is a handle still open on
it.
//
#define ERROR_CANT_RECOVER_WITH_HANDLE_OPEN 6818L
//
// MessageId: ERROR_RM_DISCONNECTED
//
// MessageText:
//
// The transaction outcome is unavailable because the resource manager
responsible for it has disconnected.
//
#define
ERROR_RM_DISCONNECTED
6819L
//
// MessageId: ERROR_ENLISTMENT_NOT_SUPERIOR
//
// MessageText:
//
// The request was rejected because the enlistment in question is not a
superior enlistment.
//
#define ERROR_ENLISTMENT_NOT_SUPERIOR
6820L
//
// MessageId: ERROR_RECOVERY_NOT_NEEDED
//
// MessageText:
//
// The transactional resource manager is already consistent. Recovery
is not needed.
//
#define
ERROR_RECOVERY_NOT_NEEDED
6821L
//
// MessageId: ERROR_RM_ALREADY_STARTED
//
// MessageText:
//
// The transactional resource manager has already been started.
//
#define
ERROR_RM_ALREADY_STARTED
6822L
//
// MessageId: ERROR_FILE_IDENTITY_NOT_PERSISTENT
//
// MessageText:
//
// The file cannot be opened transactionally, because its identity
depends on the outcome of an unresolved transaction.
//
#define ERROR_FILE_IDENTITY_NOT_PERSISTENT 6823L
//
// MessageId: ERROR_CANT_BREAK_TRANSACTIONAL_DEPENDENCY
//
// MessageText:
//
// The operation cannot be performed because another transaction is
depending on the fact that this property will not change.
//
#define ERROR_CANT_BREAK_TRANSACTIONAL_DEPENDENCY 6824L
//
// MessageId: ERROR_CANT_CROSS_RM_BOUNDARY
//
// MessageText:
//
// The operation would involve a single file with two transactional
resource managers and is therefore not allowed.
//
#define
ERROR_CANT_CROSS_RM_BOUNDARY
6825L
//
// MessageId: ERROR_TXF_DIR_NOT_EMPTY
//
// MessageText:
//
// The $Txf directory must be empty for this operation to succeed.
//
#define
ERROR_TXF_DIR_NOT_EMPTY
6826L
//
// MessageId: ERROR_INDOUBT_TRANSACTIONS_EXIST
//
// MessageText:
//
// The operation would leave a transactional resource manager in an
inconsistent state and is therefore not allowed.
//
#define ERROR_INDOUBT_TRANSACTIONS_EXIST 6827L
//
// MessageId: ERROR_TM_VOLATILE
//
// MessageText:
//
// The operation could not be completed because the transaction manager
does not have a log.
//
#define
ERROR_TM_VOLATILE
6828L
//
// MessageId: ERROR_ROLLBACK_TIMER_EXPIRED
//
// MessageText:
//
// A rollback could not be scheduled because a previously scheduled
rollback has already executed or been queued for execution.
//
#define
ERROR_ROLLBACK_TIMER_EXPIRED
6829L
//
// MessageId: ERROR_TXF_ATTRIBUTE_CORRUPT
//
// MessageText:
//
// The transactional metadata attribute on the file or directory is
corrupt and unreadable.
//
#define
ERROR_TXF_ATTRIBUTE_CORRUPT
6830L
//
// MessageId: ERROR_EFS_NOT_ALLOWED_IN_TRANSACTION
//
// MessageText:
//
// The encryption operation could not be completed because a
transaction is active.
//
#define ERROR_EFS_NOT_ALLOWED_IN_TRANSACTION 6831L
//
// MessageId: ERROR_TRANSACTIONAL_OPEN_NOT_ALLOWED
//
// MessageText:
//
// This object is not allowed to be opened in a transaction.
//
#define ERROR_TRANSACTIONAL_OPEN_NOT_ALLOWED 6832L
//
// MessageId: ERROR_LOG_GROWTH_FAILED
//
// MessageText:
//
//
An attempt to create space in the transactional resource manager's log
failed. The failure status has been recorded in the event log.
//
#define
ERROR_LOG_GROWTH_FAILED
6833L
//
// MessageId: ERROR_TRANSACTED_MAPPING_UNSUPPORTED_REMOTE
//
// MessageText:
//
// Memory mapping (creating a mapped section) a remote file under a
transaction is not supported.
//
#define ERROR_TRANSACTED_MAPPING_UNSUPPORTED_REMOTE 6834L
//
// MessageId: ERROR_TXF_METADATA_ALREADY_PRESENT
//
// MessageText:
//
// Transaction metadata is already present on this file and cannot be
superseded.
//
#define ERROR_TXF_METADATA_ALREADY_PRESENT 6835L
//
// MessageId: ERROR_TRANSACTION_SCOPE_CALLBACKS_NOT_SET
//
// MessageText:
//
// A transaction scope could not be entered because the scope handler
has not been initialized.
//
#define ERROR_TRANSACTION_SCOPE_CALLBACKS_NOT_SET 6836L
//
// MessageId: ERROR_TRANSACTION_REQUIRED_PROMOTION
//
// MessageText:
//
// Promotion was required in order to allow the resource manager to
enlist, but the transaction was set to disallow it.
//
#define ERROR_TRANSACTION_REQUIRED_PROMOTION 6837L
//
// MessageId: ERROR_CANNOT_EXECUTE_FILE_IN_TRANSACTION
//
// MessageText:
//
// This file is open for modification in an unresolved transaction and
may be opened for execute only by a transacted reader.
//
#define ERROR_CANNOT_EXECUTE_FILE_IN_TRANSACTION 6838L
//
// MessageId: ERROR_TRANSACTIONS_NOT_FROZEN
//
// MessageText:
//
// The request to thaw frozen transactions was ignored because
transactions had not previously been frozen.
//
#define ERROR_TRANSACTIONS_NOT_FROZEN
6839L
//
// MessageId: ERROR_TRANSACTION_FREEZE_IN_PROGRESS
//
// MessageText:
//
// Transactions cannot be frozen because a freeze is already in
progress.
//
#define ERROR_TRANSACTION_FREEZE_IN_PROGRESS 6840L
//
// MessageId: ERROR_NOT_SNAPSHOT_VOLUME
//
// MessageText:
//
// The target volume is not a snapshot volume. This operation is only
valid on a volume mounted as a snapshot.
//
#define
ERROR_NOT_SNAPSHOT_VOLUME
6841L
//
// MessageId: ERROR_NO_SAVEPOINT_WITH_OPEN_FILES
//
// MessageText:
//
// The savepoint operation failed because files are open on the
transaction. This is not permitted.
//
#define ERROR_NO_SAVEPOINT_WITH_OPEN_FILES 6842L
//
// MessageId: ERROR_DATA_LOST_REPAIR
//
// MessageText:
//
// Windows has discovered corruption in a file, and that file has since
been repaired. Data loss may have occurred.
//
#define
ERROR_DATA_LOST_REPAIR
6843L
//
// MessageId: ERROR_SPARSE_NOT_ALLOWED_IN_TRANSACTION
//
// MessageText:
//
// The sparse operation could not be completed because a transaction is
active on the file.
//
#define ERROR_SPARSE_NOT_ALLOWED_IN_TRANSACTION 6844L
//
// MessageId: ERROR_TM_IDENTITY_MISMATCH
//
// MessageText:
//
//
The call to create a TransactionManager object failed because the Tm
Identity stored in the logfile does not match the Tm Identity that was
passed in as an argument.
//
#define
ERROR_TM_IDENTITY_MISMATCH
6845L
//
// MessageId: ERROR_FLOATED_SECTION
//
// MessageText:
//
// I/O was attempted on a section object that has been floated as a
result of a transaction ending. There is no valid data.
//
#define
ERROR_FLOATED_SECTION
6846L
//
// MessageId: ERROR_CANNOT_ACCEPT_TRANSACTED_WORK
//
// MessageText:
//
//
The transactional resource manager cannot currently accept transacted
work due to a transient condition such as low resources.
//
#define ERROR_CANNOT_ACCEPT_TRANSACTED_WORK 6847L
//
// MessageId: ERROR_CANNOT_ABORT_TRANSACTIONS
//
// MessageText:
//
//
The transactional resource manager had too many tranactions outstanding
that could not be aborted. The transactional resource manger has been
shut down.
//
#define ERROR_CANNOT_ABORT_TRANSACTIONS 6848L
//
// MessageId: ERROR_BAD_CLUSTERS
//
// MessageText:
//
// The operation could not be completed due to bad clusters on disk.
//
#define
ERROR_BAD_CLUSTERS
6849L
//
// MessageId: ERROR_COMPRESSION_NOT_ALLOWED_IN_TRANSACTION
//
// MessageText:
//
// The compression operation could not be completed because a
transaction is active on the file.
//
#define ERROR_COMPRESSION_NOT_ALLOWED_IN_TRANSACTION 6850L
//
// MessageId: ERROR_VOLUME_DIRTY
//
// MessageText:
//
// The operation could not be completed because the volume is dirty.
Please run chkdsk and try again.
//
#define
ERROR_VOLUME_DIRTY
6851L
//
// MessageId: ERROR_NO_LINK_TRACKING_IN_TRANSACTION
//
// MessageText:
//
// The link tracking operation could not be completed because a
transaction is active.
//
#define ERROR_NO_LINK_TRACKING_IN_TRANSACTION 6852L
//
// MessageId: ERROR_OPERATION_NOT_SUPPORTED_IN_TRANSACTION
//
// MessageText:
//
// This operation cannot be performed in a transaction.
//
#define ERROR_OPERATION_NOT_SUPPORTED_IN_TRANSACTION 6853L
//
// MessageId: ERROR_EXPIRED_HANDLE
//
// MessageText:
//
//
The handle is no longer properly associated with its
transaction.
It may have been opened in a transactional resource manager that was
subsequently forced to restart. Please close the handle and
open
a new one.
//
#define
ERROR_EXPIRED_HANDLE
6854L
//
// MessageId: ERROR_TRANSACTION_NOT_ENLISTED
//
// MessageText:
//
// The specified operation could not be performed because the resource
manager is not enlisted in the transaction.
//
#define ERROR_TRANSACTION_NOT_ENLISTED 6855L
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
6900 to
6999
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
Terminal
Server Error
codes
//
//
//
//
7000 to
7099
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_CTX_WINSTATION_NAME_INVALID
//
// MessageText:
//
// The specified session name is invalid.
//
#define ERROR_CTX_WINSTATION_NAME_INVALID 7001L
//
// MessageId: ERROR_CTX_INVALID_PD
//
// MessageText:
//
// The specified protocol driver is invalid.
//
#define
ERROR_CTX_INVALID_PD
7002L
//
// MessageId: ERROR_CTX_PD_NOT_FOUND
//
// MessageText:
//
// The specified protocol driver was not found in the system path.
//
#define
ERROR_CTX_PD_NOT_FOUND
7003L
//
// MessageId: ERROR_CTX_WD_NOT_FOUND
//
// MessageText:
//
// The specified terminal connection driver was not found in the system
path.
//
#define
ERROR_CTX_WD_NOT_FOUND
7004L
//
// MessageId: ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY
//
// MessageText:
//
// A registry key for event logging could not be created for this
session.
//
#define ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY 7005L
//
// MessageId: ERROR_CTX_SERVICE_NAME_COLLISION
//
// MessageText:
//
// A service with the same name already exists on the system.
//
#define ERROR_CTX_SERVICE_NAME_COLLISION 7006L
//
// MessageId: ERROR_CTX_CLOSE_PENDING
//
// MessageText:
//
// A close operation is pending on the session.
//
#define
ERROR_CTX_CLOSE_PENDING
7007L
//
// MessageId: ERROR_CTX_NO_OUTBUF
//
// MessageText:
//
// There are no free output buffers available.
//
#define
ERROR_CTX_NO_OUTBUF
7008L
//
// MessageId: ERROR_CTX_MODEM_INF_NOT_FOUND
//
// MessageText:
//
// The MODEM.INF file was not found.
//
#define ERROR_CTX_MODEM_INF_NOT_FOUND
7009L
//
// MessageId: ERROR_CTX_INVALID_MODEMNAME
//
// MessageText:
//
// The modem name was not found in MODEM.INF.
//
#define
ERROR_CTX_INVALID_MODEMNAME
7010L
//
// MessageId: ERROR_CTX_MODEM_RESPONSE_ERROR
//
// MessageText:
//
// The modem did not accept the command sent to it. Verify that the
configured modem name matches the attached modem.
//
#define ERROR_CTX_MODEM_RESPONSE_ERROR 7011L
//
// MessageId: ERROR_CTX_MODEM_RESPONSE_TIMEOUT
//
// MessageText:
//
// The modem did not respond to the command sent to it. Verify that the
modem is properly cabled and powered on.
//
#define ERROR_CTX_MODEM_RESPONSE_TIMEOUT 7012L
//
// MessageId: ERROR_CTX_MODEM_RESPONSE_NO_CARRIER
//
// MessageText:
//
// Carrier detect has failed or carrier has been dropped due to
disconnect.
//
#define ERROR_CTX_MODEM_RESPONSE_NO_CARRIER 7013L
//
// MessageId: ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE
//
// MessageText:
//
// Dial tone not detected within the required time. Verify that the
phone cable is properly attached and functional.
//
#define ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE 7014L
//
// MessageId: ERROR_CTX_MODEM_RESPONSE_BUSY
//
// MessageText:
//
// Busy signal detected at remote site on callback.
//
#define ERROR_CTX_MODEM_RESPONSE_BUSY
7015L
//
// MessageId: ERROR_CTX_MODEM_RESPONSE_VOICE
//
// MessageText:
//
// Voice detected at remote site on callback.
//
#define ERROR_CTX_MODEM_RESPONSE_VOICE 7016L
//
// MessageId: ERROR_CTX_TD_ERROR
//
// MessageText:
//
// Transport driver error
//
#define
ERROR_CTX_TD_ERROR
7017L
//
// MessageId: ERROR_CTX_WINSTATION_NOT_FOUND
//
// MessageText:
//
// The specified session cannot be found.
//
#define ERROR_CTX_WINSTATION_NOT_FOUND 7022L
//
// MessageId: ERROR_CTX_WINSTATION_ALREADY_EXISTS
//
// MessageText:
//
// The specified session name is already in use.
//
#define ERROR_CTX_WINSTATION_ALREADY_EXISTS 7023L
//
// MessageId: ERROR_CTX_WINSTATION_BUSY
//
// MessageText:
//
//
The task you are trying to do can't be completed because Remote Desktop
Services is currently busy. Please try again in a few minutes. Other
users should still be able to log on.
//
#define
ERROR_CTX_WINSTATION_BUSY
7024L
//
// MessageId: ERROR_CTX_BAD_VIDEO_MODE
//
// MessageText:
//
// An attempt has been made to connect to a session whose video mode is
not supported by the current client.
//
#define
ERROR_CTX_BAD_VIDEO_MODE
7025L
//
// MessageId: ERROR_CTX_GRAPHICS_INVALID
//
// MessageText:
//
// The application attempted to enable DOS graphics mode. DOS graphics
mode is not supported.
//
#define
ERROR_CTX_GRAPHICS_INVALID
7035L
//
// MessageId: ERROR_CTX_LOGON_DISABLED
//
// MessageText:
//
// Your interactive logon privilege has been disabled. Please contact
your administrator.
//
#define
ERROR_CTX_LOGON_DISABLED
7037L
//
// MessageId: ERROR_CTX_NOT_CONSOLE
//
// MessageText:
//
//
The requested operation can be performed only on the system console.
This is most often the result of a driver or system DLL requiring
direct console access.
//
#define
ERROR_CTX_NOT_CONSOLE
7038L
//
// MessageId: ERROR_CTX_CLIENT_QUERY_TIMEOUT
//
// MessageText:
//
// The client failed to respond to the server connect message.
//
#define ERROR_CTX_CLIENT_QUERY_TIMEOUT 7040L
//
// MessageId: ERROR_CTX_CONSOLE_DISCONNECT
//
// MessageText:
//
// Disconnecting the console session is not supported.
//
#define
ERROR_CTX_CONSOLE_DISCONNECT
7041L
//
// MessageId: ERROR_CTX_CONSOLE_CONNECT
//
// MessageText:
//
// Reconnecting a disconnected session to the console is not supported.
//
#define
ERROR_CTX_CONSOLE_CONNECT
7042L
//
// MessageId: ERROR_CTX_SHADOW_DENIED
//
// MessageText:
//
// The request to control another session remotely was denied.
//
#define
ERROR_CTX_SHADOW_DENIED
7044L
//
// MessageId: ERROR_CTX_WINSTATION_ACCESS_DENIED
//
// MessageText:
//
// The requested session access is denied.
//
#define ERROR_CTX_WINSTATION_ACCESS_DENIED 7045L
//
// MessageId: ERROR_CTX_INVALID_WD
//
// MessageText:
//
// The specified terminal connection driver is invalid.
//
#define
ERROR_CTX_INVALID_WD
7049L
//
// MessageId: ERROR_CTX_SHADOW_INVALID
//
// MessageText:
//
// The requested session cannot be controlled remotely.
// This may be because the session is disconnected or does not
currently have a user logged on.
//
#define
ERROR_CTX_SHADOW_INVALID
7050L
//
// MessageId: ERROR_CTX_SHADOW_DISABLED
//
// MessageText:
//
// The requested session is not configured to allow remote control.
//
#define
ERROR_CTX_SHADOW_DISABLED
7051L
//
// MessageId: ERROR_CTX_CLIENT_LICENSE_IN_USE
//
// MessageText:
//
//
Your request to connect to this Terminal Server has been rejected. Your
Terminal Server client license number is currently being used by
another user. Please call your system administrator to obtain a unique
license number.
//
#define ERROR_CTX_CLIENT_LICENSE_IN_USE 7052L
//
// MessageId: ERROR_CTX_CLIENT_LICENSE_NOT_SET
//
// MessageText:
//
//
Your request to connect to this Terminal Server has been rejected. Your
Terminal Server client license number has not been entered for this
copy of the Terminal Server client. Please contact your system
administrator.
//
#define ERROR_CTX_CLIENT_LICENSE_NOT_SET 7053L
//
// MessageId: ERROR_CTX_LICENSE_NOT_AVAILABLE
//
// MessageText:
//
//
The number of connections to this computer is limited and all
connections are in use right now. Try connecting later or contact your
system administrator.
//
#define ERROR_CTX_LICENSE_NOT_AVAILABLE 7054L
//
// MessageId: ERROR_CTX_LICENSE_CLIENT_INVALID
//
// MessageText:
//
// The client you are using is not licensed to use this system. Your
logon request is denied.
//
#define ERROR_CTX_LICENSE_CLIENT_INVALID 7055L
//
// MessageId: ERROR_CTX_LICENSE_EXPIRED
//
// MessageText:
//
// The system license has expired. Your logon request is denied.
//
#define
ERROR_CTX_LICENSE_EXPIRED
7056L
//
// MessageId: ERROR_CTX_SHADOW_NOT_RUNNING
//
// MessageText:
//
// Remote control could not be terminated because the specified session
is not currently being remotely controlled.
//
#define
ERROR_CTX_SHADOW_NOT_RUNNING
7057L
//
// MessageId: ERROR_CTX_SHADOW_ENDED_BY_MODE_CHANGE
//
// MessageText:
//
//
The remote control of the console was terminated because the display
mode was changed. Changing the display mode in a remote control session
is not supported.
//
#define ERROR_CTX_SHADOW_ENDED_BY_MODE_CHANGE 7058L
//
// MessageId: ERROR_ACTIVATION_COUNT_EXCEEDED
//
// MessageText:
//
//
Activation has already been reset the maximum number of times for this
installation. Your activation timer will not be cleared.
//
#define ERROR_ACTIVATION_COUNT_EXCEEDED 7059L
//
// MessageId: ERROR_CTX_WINSTATIONS_DISABLED
//
// MessageText:
//
// Remote logins are currently disabled.
//
#define ERROR_CTX_WINSTATIONS_DISABLED 7060L
//
// MessageId: ERROR_CTX_ENCRYPTION_LEVEL_REQUIRED
//
// MessageText:
//
// You do not have the proper encryption level to access this Session.
//
#define ERROR_CTX_ENCRYPTION_LEVEL_REQUIRED 7061L
//
// MessageId: ERROR_CTX_SESSION_IN_USE
//
// MessageText:
//
//
The user %s\\%s is currently logged on to this computer. Only the
current user or an administrator can log on to this computer.
//
#define
ERROR_CTX_SESSION_IN_USE
7062L
//
// MessageId: ERROR_CTX_NO_FORCE_LOGOFF
//
// MessageText:
//
//
The user %s\\%s is already logged on to the console of this computer.
You do not have permission to log in at this time. To resolve this
issue, contact %s\\%s and have them log off.
//
#define
ERROR_CTX_NO_FORCE_LOGOFF
7063L
//
// MessageId: ERROR_CTX_ACCOUNT_RESTRICTION
//
// MessageText:
//
// Unable to log you on because of an account restriction.
//
#define ERROR_CTX_ACCOUNT_RESTRICTION
7064L
//
// MessageId: ERROR_RDP_PROTOCOL_ERROR
//
// MessageText:
//
// The RDP protocol component %2 detected an error in the protocol
stream and has disconnected the client.
//
#define
ERROR_RDP_PROTOCOL_ERROR
7065L
//
// MessageId: ERROR_CTX_CDM_CONNECT
//
// MessageText:
//
// The Client Drive Mapping Service Has Connected on Terminal
Connection.
//
#define
ERROR_CTX_CDM_CONNECT
7066L
//
// MessageId: ERROR_CTX_CDM_DISCONNECT
//
// MessageText:
//
// The Client Drive Mapping Service Has Disconnected on Terminal
Connection.
//
#define
ERROR_CTX_CDM_DISCONNECT
7067L
//
// MessageId: ERROR_CTX_SECURITY_LAYER_ERROR
//
// MessageText:
//
// The Terminal Server security layer detected an error in the protocol
stream and has disconnected the client.
//
#define ERROR_CTX_SECURITY_LAYER_ERROR 7068L
//
// MessageId: ERROR_TS_INCOMPATIBLE_SESSIONS
//
// MessageText:
//
// The target session is incompatible with the current session.
//
#define ERROR_TS_INCOMPATIBLE_SESSIONS 7069L
//
// MessageId: ERROR_TS_VIDEO_SUBSYSTEM_ERROR
//
// MessageText:
//
//
Windows can't connect to your session because a problem occurred in the
Windows video subsystem. Try connecting again later, or contact the
server administrator for assistance.
//
#define ERROR_TS_VIDEO_SUBSYSTEM_ERROR 7070L
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
7100 to
7499
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
/
//
Traffic Control Error
Codes
/
//
/
//
7500 to
7999
/
//
/
//
defined in:
tcerror.h
/
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
Active Directory Error
codes
//
//
//
//
8000 to
8999
//
///////////////////////////////////////////////////
//
*****************
// FACILITY_FILE_REPLICATION_SERVICE
// *****************
//
// MessageId: FRS_ERR_INVALID_API_SEQUENCE
//
// MessageText:
//
// The file replication service API was called incorrectly.
//
#define
FRS_ERR_INVALID_API_SEQUENCE
8001L
//
// MessageId: FRS_ERR_STARTING_SERVICE
//
// MessageText:
//
// The file replication service cannot be started.
//
#define
FRS_ERR_STARTING_SERVICE
8002L
//
// MessageId: FRS_ERR_STOPPING_SERVICE
//
// MessageText:
//
// The file replication service cannot be stopped.
//
#define
FRS_ERR_STOPPING_SERVICE
8003L
//
// MessageId: FRS_ERR_INTERNAL_API
//
// MessageText:
//
// The file replication service API terminated the request. The event
log may have more information.
//
#define
FRS_ERR_INTERNAL_API
8004L
//
// MessageId: FRS_ERR_INTERNAL
//
// MessageText:
//
// The file replication service terminated the request. The event log
may have more information.
//
#define
FRS_ERR_INTERNAL
8005L
//
// MessageId: FRS_ERR_SERVICE_COMM
//
// MessageText:
//
// The file replication service cannot be contacted. The event log may
have more information.
//
#define
FRS_ERR_SERVICE_COMM
8006L
//
// MessageId: FRS_ERR_INSUFFICIENT_PRIV
//
// MessageText:
//
//
The file replication service cannot satisfy the request because the
user has insufficient privileges. The event log may have more
information.
//
#define
FRS_ERR_INSUFFICIENT_PRIV
8007L
//
// MessageId: FRS_ERR_AUTHENTICATION
//
// MessageText:
//
//
The file replication service cannot satisfy the request because
authenticated RPC is not available. The event log may have more
information.
//
#define
FRS_ERR_AUTHENTICATION
8008L
//
// MessageId: FRS_ERR_PARENT_INSUFFICIENT_PRIV
//
// MessageText:
//
//
The file replication service cannot satisfy the request because the
user has insufficient privileges on the domain controller. The event
log may have more information.
//
#define FRS_ERR_PARENT_INSUFFICIENT_PRIV 8009L
//
// MessageId: FRS_ERR_PARENT_AUTHENTICATION
//
// MessageText:
//
//
The file replication service cannot satisfy the request because
authenticated RPC is not available on the domain controller. The event
log may have more information.
//
#define FRS_ERR_PARENT_AUTHENTICATION
8010L
//
// MessageId: FRS_ERR_CHILD_TO_PARENT_COMM
//
// MessageText:
//
//
The file replication service cannot communicate with the file
replication service on the domain controller. The event log may have
more information.
//
#define
FRS_ERR_CHILD_TO_PARENT_COMM
8011L
//
// MessageId: FRS_ERR_PARENT_TO_CHILD_COMM
//
// MessageText:
//
//
The file replication service on the domain controller cannot
communicate with the file replication service on this computer. The
event log may have more information.
//
#define
FRS_ERR_PARENT_TO_CHILD_COMM
8012L
//
// MessageId: FRS_ERR_SYSVOL_POPULATE
//
// MessageText:
//
//
The file replication service cannot populate the system volume because
of an internal error. The event log may have more information.
//
#define
FRS_ERR_SYSVOL_POPULATE
8013L
//
// MessageId: FRS_ERR_SYSVOL_POPULATE_TIMEOUT
//
// MessageText:
//
//
The file replication service cannot populate the system volume because
of an internal timeout. The event log may have more information.
//
#define FRS_ERR_SYSVOL_POPULATE_TIMEOUT 8014L
//
// MessageId: FRS_ERR_SYSVOL_IS_BUSY
//
// MessageText:
//
// The file replication service cannot process the request. The system
volume is busy with a previous request.
//
#define
FRS_ERR_SYSVOL_IS_BUSY
8015L
//
// MessageId: FRS_ERR_SYSVOL_DEMOTE
//
// MessageText:
//
//
The file replication service cannot stop replicating the system volume
because of an internal error. The event log may have more information.
//
#define
FRS_ERR_SYSVOL_DEMOTE
8016L
//
// MessageId: FRS_ERR_INVALID_SERVICE_PARAMETER
//
// MessageText:
//
// The file replication service detected an invalid parameter.
//
#define FRS_ERR_INVALID_SERVICE_PARAMETER 8017L
//
*****************
// FACILITY DIRECTORY SERVICE
// *****************
#define DS_S_SUCCESS NO_ERROR
//
// MessageId: ERROR_DS_NOT_INSTALLED
//
// MessageText:
//
// An error occurred while installing the directory service. For more
information, see the event log.
//
#define
ERROR_DS_NOT_INSTALLED
8200L
//
// MessageId: ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY
//
// MessageText:
//
// The directory service evaluated group memberships locally.
//
#define ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY 8201L
//
// MessageId: ERROR_DS_NO_ATTRIBUTE_OR_VALUE
//
// MessageText:
//
// The specified directory service attribute or value does not exist.
//
#define ERROR_DS_NO_ATTRIBUTE_OR_VALUE 8202L
//
// MessageId: ERROR_DS_INVALID_ATTRIBUTE_SYNTAX
//
// MessageText:
//
// The attribute syntax specified to the directory service is invalid.
//
#define ERROR_DS_INVALID_ATTRIBUTE_SYNTAX 8203L
//
// MessageId: ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED
//
// MessageText:
//
// The attribute type specified to the directory service is not defined.
//
#define ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED 8204L
//
// MessageId: ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS
//
// MessageText:
//
// The specified directory service attribute or value already exists.
//
#define ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS 8205L
//
// MessageId: ERROR_DS_BUSY
//
// MessageText:
//
// The directory service is busy.
//
#define
ERROR_DS_BUSY
8206L
//
// MessageId: ERROR_DS_UNAVAILABLE
//
// MessageText:
//
// The directory service is unavailable.
//
#define
ERROR_DS_UNAVAILABLE
8207L
//
// MessageId: ERROR_DS_NO_RIDS_ALLOCATED
//
// MessageText:
//
// The directory service was unable to allocate a relative identifier.
//
#define
ERROR_DS_NO_RIDS_ALLOCATED
8208L
//
// MessageId: ERROR_DS_NO_MORE_RIDS
//
// MessageText:
//
// The directory service has exhausted the pool of relative identifiers.
//
#define
ERROR_DS_NO_MORE_RIDS
8209L
//
// MessageId: ERROR_DS_INCORRECT_ROLE_OWNER
//
// MessageText:
//
// The requested operation could not be performed because the directory
service is not the master for that type of operation.
//
#define ERROR_DS_INCORRECT_ROLE_OWNER
8210L
//
// MessageId: ERROR_DS_RIDMGR_INIT_ERROR
//
// MessageText:
//
// The directory service was unable to initialize the subsystem that
allocates relative identifiers.
//
#define
ERROR_DS_RIDMGR_INIT_ERROR
8211L
//
// MessageId: ERROR_DS_OBJ_CLASS_VIOLATION
//
// MessageText:
//
// The requested operation did not satisfy one or more constraints
associated with the class of the object.
//
#define
ERROR_DS_OBJ_CLASS_VIOLATION
8212L
//
// MessageId: ERROR_DS_CANT_ON_NON_LEAF
//
// MessageText:
//
// The directory service can perform the requested operation only on a
leaf object.
//
#define
ERROR_DS_CANT_ON_NON_LEAF
8213L
//
// MessageId: ERROR_DS_CANT_ON_RDN
//
// MessageText:
//
// The directory service cannot perform the requested operation on the
RDN attribute of an object.
//
#define
ERROR_DS_CANT_ON_RDN
8214L
//
// MessageId: ERROR_DS_CANT_MOD_OBJ_CLASS
//
// MessageText:
//
// The directory service detected an attempt to modify the object class
of an object.
//
#define
ERROR_DS_CANT_MOD_OBJ_CLASS
8215L
//
// MessageId: ERROR_DS_CROSS_DOM_MOVE_ERROR
//
// MessageText:
//
// The requested cross-domain move operation could not be performed.
//
#define ERROR_DS_CROSS_DOM_MOVE_ERROR
8216L
//
// MessageId: ERROR_DS_GC_NOT_AVAILABLE
//
// MessageText:
//
// Unable to contact the global catalog server.
//
#define
ERROR_DS_GC_NOT_AVAILABLE
8217L
//
// MessageId: ERROR_SHARED_POLICY
//
// MessageText:
//
// The policy object is shared and can only be modified at the root.
//
#define
ERROR_SHARED_POLICY
8218L
//
// MessageId: ERROR_POLICY_OBJECT_NOT_FOUND
//
// MessageText:
//
// The policy object does not exist.
//
#define ERROR_POLICY_OBJECT_NOT_FOUND
8219L
//
// MessageId: ERROR_POLICY_ONLY_IN_DS
//
// MessageText:
//
// The requested policy information is only in the directory service.
//
#define
ERROR_POLICY_ONLY_IN_DS
8220L
//
// MessageId: ERROR_PROMOTION_ACTIVE
//
// MessageText:
//
// A domain controller promotion is currently active.
//
#define
ERROR_PROMOTION_ACTIVE
8221L
//
// MessageId: ERROR_NO_PROMOTION_ACTIVE
//
// MessageText:
//
// A domain controller promotion is not currently active
//
#define
ERROR_NO_PROMOTION_ACTIVE
8222L
//
8223 unused
//
// MessageId: ERROR_DS_OPERATIONS_ERROR
//
// MessageText:
//
// An operations error occurred.
//
#define
ERROR_DS_OPERATIONS_ERROR
8224L
//
// MessageId: ERROR_DS_PROTOCOL_ERROR
//
// MessageText:
//
// A protocol error occurred.
//
#define
ERROR_DS_PROTOCOL_ERROR
8225L
//
// MessageId: ERROR_DS_TIMELIMIT_EXCEEDED
//
// MessageText:
//
// The time limit for this request was exceeded.
//
#define
ERROR_DS_TIMELIMIT_EXCEEDED
8226L
//
// MessageId: ERROR_DS_SIZELIMIT_EXCEEDED
//
// MessageText:
//
// The size limit for this request was exceeded.
//
#define
ERROR_DS_SIZELIMIT_EXCEEDED
8227L
//
// MessageId: ERROR_DS_ADMIN_LIMIT_EXCEEDED
//
// MessageText:
//
// The administrative limit for this request was exceeded.
//
#define ERROR_DS_ADMIN_LIMIT_EXCEEDED
8228L
//
// MessageId: ERROR_DS_COMPARE_FALSE
//
// MessageText:
//
// The compare response was false.
//
#define
ERROR_DS_COMPARE_FALSE
8229L
//
// MessageId: ERROR_DS_COMPARE_TRUE
//
// MessageText:
//
// The compare response was true.
//
#define
ERROR_DS_COMPARE_TRUE
8230L
//
// MessageId: ERROR_DS_AUTH_METHOD_NOT_SUPPORTED
//
// MessageText:
//
// The requested authentication method is not supported by the server.
//
#define ERROR_DS_AUTH_METHOD_NOT_SUPPORTED 8231L
//
// MessageId: ERROR_DS_STRONG_AUTH_REQUIRED
//
// MessageText:
//
// A more secure authentication method is required for this server.
//
#define ERROR_DS_STRONG_AUTH_REQUIRED
8232L
//
// MessageId: ERROR_DS_INAPPROPRIATE_AUTH
//
// MessageText:
//
// Inappropriate authentication.
//
#define
ERROR_DS_INAPPROPRIATE_AUTH
8233L
//
// MessageId: ERROR_DS_AUTH_UNKNOWN
//
// MessageText:
//
// The authentication mechanism is unknown.
//
#define
ERROR_DS_AUTH_UNKNOWN
8234L
//
// MessageId: ERROR_DS_REFERRAL
//
// MessageText:
//
// A referral was returned from the server.
//
#define
ERROR_DS_REFERRAL
8235L
//
// MessageId: ERROR_DS_UNAVAILABLE_CRIT_EXTENSION
//
// MessageText:
//
// The server does not support the requested critical extension.
//
#define ERROR_DS_UNAVAILABLE_CRIT_EXTENSION 8236L
//
// MessageId: ERROR_DS_CONFIDENTIALITY_REQUIRED
//
// MessageText:
//
// This request requires a secure connection.
//
#define ERROR_DS_CONFIDENTIALITY_REQUIRED 8237L
//
// MessageId: ERROR_DS_INAPPROPRIATE_MATCHING
//
// MessageText:
//
// Inappropriate matching.
//
#define ERROR_DS_INAPPROPRIATE_MATCHING 8238L
//
// MessageId: ERROR_DS_CONSTRAINT_VIOLATION
//
// MessageText:
//
// A constraint violation occurred.
//
#define ERROR_DS_CONSTRAINT_VIOLATION
8239L
//
// MessageId: ERROR_DS_NO_SUCH_OBJECT
//
// MessageText:
//
// There is no such object on the server.
//
#define
ERROR_DS_NO_SUCH_OBJECT
8240L
//
// MessageId: ERROR_DS_ALIAS_PROBLEM
//
// MessageText:
//
// There is an alias problem.
//
#define
ERROR_DS_ALIAS_PROBLEM
8241L
//
// MessageId: ERROR_DS_INVALID_DN_SYNTAX
//
// MessageText:
//
// An invalid dn syntax has been specified.
//
#define
ERROR_DS_INVALID_DN_SYNTAX
8242L
//
// MessageId: ERROR_DS_IS_LEAF
//
// MessageText:
//
// The object is a leaf object.
//
#define
ERROR_DS_IS_LEAF
8243L
//
// MessageId: ERROR_DS_ALIAS_DEREF_PROBLEM
//
// MessageText:
//
// There is an alias dereferencing problem.
//
#define
ERROR_DS_ALIAS_DEREF_PROBLEM
8244L
//
// MessageId: ERROR_DS_UNWILLING_TO_PERFORM
//
// MessageText:
//
// The server is unwilling to process the request.
//
#define ERROR_DS_UNWILLING_TO_PERFORM
8245L
//
// MessageId: ERROR_DS_LOOP_DETECT
//
// MessageText:
//
// A loop has been detected.
//
#define
ERROR_DS_LOOP_DETECT
8246L
//
// MessageId: ERROR_DS_NAMING_VIOLATION
//
// MessageText:
//
// There is a naming violation.
//
#define
ERROR_DS_NAMING_VIOLATION
8247L
//
// MessageId: ERROR_DS_OBJECT_RESULTS_TOO_LARGE
//
// MessageText:
//
// The result set is too large.
//
#define ERROR_DS_OBJECT_RESULTS_TOO_LARGE 8248L
//
// MessageId: ERROR_DS_AFFECTS_MULTIPLE_DSAS
//
// MessageText:
//
// The operation affects multiple DSAs
//
#define ERROR_DS_AFFECTS_MULTIPLE_DSAS 8249L
//
// MessageId: ERROR_DS_SERVER_DOWN
//
// MessageText:
//
// The server is not operational.
//
#define
ERROR_DS_SERVER_DOWN
8250L
//
// MessageId: ERROR_DS_LOCAL_ERROR
//
// MessageText:
//
// A local error has occurred.
//
#define
ERROR_DS_LOCAL_ERROR
8251L
//
// MessageId: ERROR_DS_ENCODING_ERROR
//
// MessageText:
//
// An encoding error has occurred.
//
#define
ERROR_DS_ENCODING_ERROR
8252L
//
// MessageId: ERROR_DS_DECODING_ERROR
//
// MessageText:
//
// A decoding error has occurred.
//
#define
ERROR_DS_DECODING_ERROR
8253L
//
// MessageId: ERROR_DS_FILTER_UNKNOWN
//
// MessageText:
//
// The search filter cannot be recognized.
//
#define
ERROR_DS_FILTER_UNKNOWN
8254L
//
// MessageId: ERROR_DS_PARAM_ERROR
//
// MessageText:
//
// One or more parameters are illegal.
//
#define
ERROR_DS_PARAM_ERROR
8255L
//
// MessageId: ERROR_DS_NOT_SUPPORTED
//
// MessageText:
//
// The specified method is not supported.
//
#define
ERROR_DS_NOT_SUPPORTED
8256L
//
// MessageId: ERROR_DS_NO_RESULTS_RETURNED
//
// MessageText:
//
// No results were returned.
//
#define
ERROR_DS_NO_RESULTS_RETURNED
8257L
//
// MessageId: ERROR_DS_CONTROL_NOT_FOUND
//
// MessageText:
//
// The specified control is not supported by the server.
//
#define
ERROR_DS_CONTROL_NOT_FOUND
8258L
//
// MessageId: ERROR_DS_CLIENT_LOOP
//
// MessageText:
//
// A referral loop was detected by the client.
//
#define
ERROR_DS_CLIENT_LOOP
8259L
//
// MessageId: ERROR_DS_REFERRAL_LIMIT_EXCEEDED
//
// MessageText:
//
// The preset referral limit was exceeded.
//
#define ERROR_DS_REFERRAL_LIMIT_EXCEEDED 8260L
//
// MessageId: ERROR_DS_SORT_CONTROL_MISSING
//
// MessageText:
//
// The search requires a SORT control.
//
#define ERROR_DS_SORT_CONTROL_MISSING
8261L
//
// MessageId: ERROR_DS_OFFSET_RANGE_ERROR
//
// MessageText:
//
// The search results exceed the offset range specified.
//
#define
ERROR_DS_OFFSET_RANGE_ERROR
8262L
//
// MessageId: ERROR_DS_ROOT_MUST_BE_NC
//
// MessageText:
//
// The root object must be the head of a naming context. The root
object cannot have an instantiated parent.
//
#define
ERROR_DS_ROOT_MUST_BE_NC
8301L
//
// MessageId: ERROR_DS_ADD_REPLICA_INHIBITED
//
// MessageText:
//
// The add replica operation cannot be performed. The naming context
must be writeable in order to create the replica.
//
#define ERROR_DS_ADD_REPLICA_INHIBITED 8302L
//
// MessageId: ERROR_DS_ATT_NOT_DEF_IN_SCHEMA
//
// MessageText:
//
// A reference to an attribute that is not defined in the schema
occurred.
//
#define ERROR_DS_ATT_NOT_DEF_IN_SCHEMA 8303L
//
// MessageId: ERROR_DS_MAX_OBJ_SIZE_EXCEEDED
//
// MessageText:
//
// The maximum size of an object has been exceeded.
//
#define ERROR_DS_MAX_OBJ_SIZE_EXCEEDED 8304L
//
// MessageId: ERROR_DS_OBJ_STRING_NAME_EXISTS
//
// MessageText:
//
// An attempt was made to add an object to the directory with a name
that is already in use.
//
#define ERROR_DS_OBJ_STRING_NAME_EXISTS 8305L
//
// MessageId: ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA
//
// MessageText:
//
// An attempt was made to add an object of a class that does not have
an RDN defined in the schema.
//
#define ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA 8306L
//
// MessageId: ERROR_DS_RDN_DOESNT_MATCH_SCHEMA
//
// MessageText:
//
// An attempt was made to add an object using an RDN that is not the
RDN defined in the schema.
//
#define ERROR_DS_RDN_DOESNT_MATCH_SCHEMA 8307L
//
// MessageId: ERROR_DS_NO_REQUESTED_ATTS_FOUND
//
// MessageText:
//
// None of the requested attributes were found on the objects.
//
#define ERROR_DS_NO_REQUESTED_ATTS_FOUND 8308L
//
// MessageId: ERROR_DS_USER_BUFFER_TO_SMALL
//
// MessageText:
//
// The user buffer is too small.
//
#define ERROR_DS_USER_BUFFER_TO_SMALL
8309L
//
// MessageId: ERROR_DS_ATT_IS_NOT_ON_OBJ
//
// MessageText:
//
// The attribute specified in the operation is not present on the
object.
//
#define
ERROR_DS_ATT_IS_NOT_ON_OBJ
8310L
//
// MessageId: ERROR_DS_ILLEGAL_MOD_OPERATION
//
// MessageText:
//
// Illegal modify operation. Some aspect of the modification is not
permitted.
//
#define ERROR_DS_ILLEGAL_MOD_OPERATION 8311L
//
// MessageId: ERROR_DS_OBJ_TOO_LARGE
//
// MessageText:
//
// The specified object is too large.
//
#define
ERROR_DS_OBJ_TOO_LARGE
8312L
//
// MessageId: ERROR_DS_BAD_INSTANCE_TYPE
//
// MessageText:
//
// The specified instance type is not valid.
//
#define
ERROR_DS_BAD_INSTANCE_TYPE
8313L
//
// MessageId: ERROR_DS_MASTERDSA_REQUIRED
//
// MessageText:
//
// The operation must be performed at a master DSA.
//
#define
ERROR_DS_MASTERDSA_REQUIRED
8314L
//
// MessageId: ERROR_DS_OBJECT_CLASS_REQUIRED
//
// MessageText:
//
// The object class attribute must be specified.
//
#define ERROR_DS_OBJECT_CLASS_REQUIRED 8315L
//
// MessageId: ERROR_DS_MISSING_REQUIRED_ATT
//
// MessageText:
//
// A required attribute is missing.
//
#define ERROR_DS_MISSING_REQUIRED_ATT
8316L
//
// MessageId: ERROR_DS_ATT_NOT_DEF_FOR_CLASS
//
// MessageText:
//
// An attempt was made to modify an object to include an attribute that
is not legal for its class.
//
#define ERROR_DS_ATT_NOT_DEF_FOR_CLASS 8317L
//
// MessageId: ERROR_DS_ATT_ALREADY_EXISTS
//
// MessageText:
//
// The specified attribute is already present on the object.
//
#define
ERROR_DS_ATT_ALREADY_EXISTS
8318L
//
8319 unused
//
// MessageId: ERROR_DS_CANT_ADD_ATT_VALUES
//
// MessageText:
//
// The specified attribute is not present, or has no values.
//
#define
ERROR_DS_CANT_ADD_ATT_VALUES
8320L
//
// MessageId: ERROR_DS_SINGLE_VALUE_CONSTRAINT
//
// MessageText:
//
// Multiple values were specified for an attribute that can have only
one value.
//
#define ERROR_DS_SINGLE_VALUE_CONSTRAINT 8321L
//
// MessageId: ERROR_DS_RANGE_CONSTRAINT
//
// MessageText:
//
// A value for the attribute was not in the acceptable range of values.
//
#define
ERROR_DS_RANGE_CONSTRAINT
8322L
//
// MessageId: ERROR_DS_ATT_VAL_ALREADY_EXISTS
//
// MessageText:
//
// The specified value already exists.
//
#define ERROR_DS_ATT_VAL_ALREADY_EXISTS 8323L
//
// MessageId: ERROR_DS_CANT_REM_MISSING_ATT
//
// MessageText:
//
// The attribute cannot be removed because it is not present on the
object.
//
#define ERROR_DS_CANT_REM_MISSING_ATT
8324L
//
// MessageId: ERROR_DS_CANT_REM_MISSING_ATT_VAL
//
// MessageText:
//
// The attribute value cannot be removed because it is not present on
the object.
//
#define ERROR_DS_CANT_REM_MISSING_ATT_VAL 8325L
//
// MessageId: ERROR_DS_ROOT_CANT_BE_SUBREF
//
// MessageText:
//
// The specified root object cannot be a subref.
//
#define
ERROR_DS_ROOT_CANT_BE_SUBREF
8326L
//
// MessageId: ERROR_DS_NO_CHAINING
//
// MessageText:
//
// Chaining is not permitted.
//
#define
ERROR_DS_NO_CHAINING
8327L
//
// MessageId: ERROR_DS_NO_CHAINED_EVAL
//
// MessageText:
//
// Chained evaluation is not permitted.
//
#define
ERROR_DS_NO_CHAINED_EVAL
8328L
//
// MessageId: ERROR_DS_NO_PARENT_OBJECT
//
// MessageText:
//
// The operation could not be performed because the object's parent is
either uninstantiated or deleted.
//
#define
ERROR_DS_NO_PARENT_OBJECT
8329L
//
// MessageId: ERROR_DS_PARENT_IS_AN_ALIAS
//
// MessageText:
//
// Having a parent that is an alias is not permitted. Aliases are leaf
objects.
//
#define
ERROR_DS_PARENT_IS_AN_ALIAS
8330L
//
// MessageId: ERROR_DS_CANT_MIX_MASTER_AND_REPS
//
// MessageText:
//
// The object and parent must be of the same type, either both masters
or both replicas.
//
#define ERROR_DS_CANT_MIX_MASTER_AND_REPS 8331L
//
// MessageId: ERROR_DS_CHILDREN_EXIST
//
// MessageText:
//
// The operation cannot be performed because child objects exist. This
operation can only be performed on a leaf object.
//
#define
ERROR_DS_CHILDREN_EXIST
8332L
//
// MessageId: ERROR_DS_OBJ_NOT_FOUND
//
// MessageText:
//
// Directory object not found.
//
#define
ERROR_DS_OBJ_NOT_FOUND
8333L
//
// MessageId: ERROR_DS_ALIASED_OBJ_MISSING
//
// MessageText:
//
// The aliased object is missing.
//
#define
ERROR_DS_ALIASED_OBJ_MISSING
8334L
//
// MessageId: ERROR_DS_BAD_NAME_SYNTAX
//
// MessageText:
//
// The object name has bad syntax.
//
#define
ERROR_DS_BAD_NAME_SYNTAX
8335L
//
// MessageId: ERROR_DS_ALIAS_POINTS_TO_ALIAS
//
// MessageText:
//
// It is not permitted for an alias to refer to another alias.
//
#define ERROR_DS_ALIAS_POINTS_TO_ALIAS 8336L
//
// MessageId: ERROR_DS_CANT_DEREF_ALIAS
//
// MessageText:
//
// The alias cannot be dereferenced.
//
#define
ERROR_DS_CANT_DEREF_ALIAS
8337L
//
// MessageId: ERROR_DS_OUT_OF_SCOPE
//
// MessageText:
//
// The operation is out of scope.
//
#define
ERROR_DS_OUT_OF_SCOPE
8338L
//
// MessageId: ERROR_DS_OBJECT_BEING_REMOVED
//
// MessageText:
//
// The operation cannot continue because the object is in the process
of being removed.
//
#define ERROR_DS_OBJECT_BEING_REMOVED
8339L
//
// MessageId: ERROR_DS_CANT_DELETE_DSA_OBJ
//
// MessageText:
//
// The DSA object cannot be deleted.
//
#define
ERROR_DS_CANT_DELETE_DSA_OBJ
8340L
//
// MessageId: ERROR_DS_GENERIC_ERROR
//
// MessageText:
//
// A directory service error has occurred.
//
#define
ERROR_DS_GENERIC_ERROR
8341L
//
// MessageId: ERROR_DS_DSA_MUST_BE_INT_MASTER
//
// MessageText:
//
// The operation can only be performed on an internal master DSA object.
//
#define ERROR_DS_DSA_MUST_BE_INT_MASTER 8342L
//
// MessageId: ERROR_DS_CLASS_NOT_DSA
//
// MessageText:
//
// The object must be of class DSA.
//
#define
ERROR_DS_CLASS_NOT_DSA
8343L
//
// MessageId: ERROR_DS_INSUFF_ACCESS_RIGHTS
//
// MessageText:
//
// Insufficient access rights to perform the operation.
//
#define ERROR_DS_INSUFF_ACCESS_RIGHTS
8344L
//
// MessageId: ERROR_DS_ILLEGAL_SUPERIOR
//
// MessageText:
//
// The object cannot be added because the parent is not on the list of
possible superiors.
//
#define
ERROR_DS_ILLEGAL_SUPERIOR
8345L
//
// MessageId: ERROR_DS_ATTRIBUTE_OWNED_BY_SAM
//
// MessageText:
//
// Access to the attribute is not permitted because the attribute is
owned by the Security Accounts Manager (SAM).
//
#define ERROR_DS_ATTRIBUTE_OWNED_BY_SAM 8346L
//
// MessageId: ERROR_DS_NAME_TOO_MANY_PARTS
//
// MessageText:
//
// The name has too many parts.
//
#define
ERROR_DS_NAME_TOO_MANY_PARTS
8347L
//
// MessageId: ERROR_DS_NAME_TOO_LONG
//
// MessageText:
//
// The name is too long.
//
#define
ERROR_DS_NAME_TOO_LONG
8348L
//
// MessageId: ERROR_DS_NAME_VALUE_TOO_LONG
//
// MessageText:
//
// The name value is too long.
//
#define
ERROR_DS_NAME_VALUE_TOO_LONG
8349L
//
// MessageId: ERROR_DS_NAME_UNPARSEABLE
//
// MessageText:
//
// The directory service encountered an error parsing a name.
//
#define
ERROR_DS_NAME_UNPARSEABLE
8350L
//
// MessageId: ERROR_DS_NAME_TYPE_UNKNOWN
//
// MessageText:
//
// The directory service cannot get the attribute type for a name.
//
#define
ERROR_DS_NAME_TYPE_UNKNOWN
8351L
//
// MessageId: ERROR_DS_NOT_AN_OBJECT
//
// MessageText:
//
// The name does not identify an object; the name identifies a phantom.
//
#define
ERROR_DS_NOT_AN_OBJECT
8352L
//
// MessageId: ERROR_DS_SEC_DESC_TOO_SHORT
//
// MessageText:
//
// The security descriptor is too short.
//
#define
ERROR_DS_SEC_DESC_TOO_SHORT
8353L
//
// MessageId: ERROR_DS_SEC_DESC_INVALID
//
// MessageText:
//
// The security descriptor is invalid.
//
#define
ERROR_DS_SEC_DESC_INVALID
8354L
//
// MessageId: ERROR_DS_NO_DELETED_NAME
//
// MessageText:
//
// Failed to create name for deleted object.
//
#define
ERROR_DS_NO_DELETED_NAME
8355L
//
// MessageId: ERROR_DS_SUBREF_MUST_HAVE_PARENT
//
// MessageText:
//
// The parent of a new subref must exist.
//
#define ERROR_DS_SUBREF_MUST_HAVE_PARENT 8356L
//
// MessageId: ERROR_DS_NCNAME_MUST_BE_NC
//
// MessageText:
//
// The object must be a naming context.
//
#define
ERROR_DS_NCNAME_MUST_BE_NC
8357L
//
// MessageId: ERROR_DS_CANT_ADD_SYSTEM_ONLY
//
// MessageText:
//
// It is not permitted to add an attribute which is owned by the system.
//
#define ERROR_DS_CANT_ADD_SYSTEM_ONLY
8358L
//
// MessageId: ERROR_DS_CLASS_MUST_BE_CONCRETE
//
// MessageText:
//
// The class of the object must be structural; you cannot instantiate
an abstract class.
//
#define ERROR_DS_CLASS_MUST_BE_CONCRETE 8359L
//
// MessageId: ERROR_DS_INVALID_DMD
//
// MessageText:
//
// The schema object could not be found.
//
#define
ERROR_DS_INVALID_DMD
8360L
//
// MessageId: ERROR_DS_OBJ_GUID_EXISTS
//
// MessageText:
//
// A local object with this GUID (dead or alive) already exists.
//
#define
ERROR_DS_OBJ_GUID_EXISTS
8361L
//
// MessageId: ERROR_DS_NOT_ON_BACKLINK
//
// MessageText:
//
// The operation cannot be performed on a back link.
//
#define
ERROR_DS_NOT_ON_BACKLINK
8362L
//
// MessageId: ERROR_DS_NO_CROSSREF_FOR_NC
//
// MessageText:
//
// The cross reference for the specified naming context could not be
found.
//
#define
ERROR_DS_NO_CROSSREF_FOR_NC
8363L
//
// MessageId: ERROR_DS_SHUTTING_DOWN
//
// MessageText:
//
// The operation could not be performed because the directory service
is shutting down.
//
#define
ERROR_DS_SHUTTING_DOWN
8364L
//
// MessageId: ERROR_DS_UNKNOWN_OPERATION
//
// MessageText:
//
// The directory service request is invalid.
//
#define
ERROR_DS_UNKNOWN_OPERATION
8365L
//
// MessageId: ERROR_DS_INVALID_ROLE_OWNER
//
// MessageText:
//
// The role owner attribute could not be read.
//
#define
ERROR_DS_INVALID_ROLE_OWNER
8366L
//
// MessageId: ERROR_DS_COULDNT_CONTACT_FSMO
//
// MessageText:
//
// The requested FSMO operation failed. The current FSMO holder could
not be contacted.
//
#define ERROR_DS_COULDNT_CONTACT_FSMO
8367L
//
// MessageId: ERROR_DS_CROSS_NC_DN_RENAME
//
// MessageText:
//
// Modification of a DN across a naming context is not permitted.
//
#define
ERROR_DS_CROSS_NC_DN_RENAME
8368L
//
// MessageId: ERROR_DS_CANT_MOD_SYSTEM_ONLY
//
// MessageText:
//
// The attribute cannot be modified because it is owned by the system.
//
#define ERROR_DS_CANT_MOD_SYSTEM_ONLY
8369L
//
// MessageId: ERROR_DS_REPLICATOR_ONLY
//
// MessageText:
//
// Only the replicator can perform this function.
//
#define
ERROR_DS_REPLICATOR_ONLY
8370L
//
// MessageId: ERROR_DS_OBJ_CLASS_NOT_DEFINED
//
// MessageText:
//
// The specified class is not defined.
//
#define ERROR_DS_OBJ_CLASS_NOT_DEFINED 8371L
//
// MessageId: ERROR_DS_OBJ_CLASS_NOT_SUBCLASS
//
// MessageText:
//
// The specified class is not a subclass.
//
#define ERROR_DS_OBJ_CLASS_NOT_SUBCLASS 8372L
//
// MessageId: ERROR_DS_NAME_REFERENCE_INVALID
//
// MessageText:
//
// The name reference is invalid.
//
#define ERROR_DS_NAME_REFERENCE_INVALID 8373L
//
// MessageId: ERROR_DS_CROSS_REF_EXISTS
//
// MessageText:
//
// A cross reference already exists.
//
#define
ERROR_DS_CROSS_REF_EXISTS
8374L
//
// MessageId: ERROR_DS_CANT_DEL_MASTER_CROSSREF
//
// MessageText:
//
// It is not permitted to delete a master cross reference.
//
#define ERROR_DS_CANT_DEL_MASTER_CROSSREF 8375L
//
// MessageId: ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD
//
// MessageText:
//
// Subtree notifications are only supported on NC heads.
//
#define ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD 8376L
//
// MessageId: ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX
//
// MessageText:
//
// Notification filter is too complex.
//
#define ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX 8377L
//
// MessageId: ERROR_DS_DUP_RDN
//
// MessageText:
//
// Schema update failed: duplicate RDN.
//
#define
ERROR_DS_DUP_RDN
8378L
//
// MessageId: ERROR_DS_DUP_OID
//
// MessageText:
//
// Schema update failed: duplicate OID.
//
#define
ERROR_DS_DUP_OID
8379L
//
// MessageId: ERROR_DS_DUP_MAPI_ID
//
// MessageText:
//
// Schema update failed: duplicate MAPI identifier.
//
#define
ERROR_DS_DUP_MAPI_ID
8380L
//
// MessageId: ERROR_DS_DUP_SCHEMA_ID_GUID
//
// MessageText:
//
// Schema update failed: duplicate schema-id GUID.
//
#define
ERROR_DS_DUP_SCHEMA_ID_GUID
8381L
//
// MessageId: ERROR_DS_DUP_LDAP_DISPLAY_NAME
//
// MessageText:
//
// Schema update failed: duplicate LDAP display name.
//
#define ERROR_DS_DUP_LDAP_DISPLAY_NAME 8382L
//
// MessageId: ERROR_DS_SEMANTIC_ATT_TEST
//
// MessageText:
//
// Schema update failed: range-lower less than range upper.
//
#define
ERROR_DS_SEMANTIC_ATT_TEST
8383L
//
// MessageId: ERROR_DS_SYNTAX_MISMATCH
//
// MessageText:
//
// Schema update failed: syntax mismatch.
//
#define
ERROR_DS_SYNTAX_MISMATCH
8384L
//
// MessageId: ERROR_DS_EXISTS_IN_MUST_HAVE
//
// MessageText:
//
// Schema deletion failed: attribute is used in must-contain.
//
#define
ERROR_DS_EXISTS_IN_MUST_HAVE
8385L
//
// MessageId: ERROR_DS_EXISTS_IN_MAY_HAVE
//
// MessageText:
//
// Schema deletion failed: attribute is used in may-contain.
//
#define
ERROR_DS_EXISTS_IN_MAY_HAVE
8386L
//
// MessageId: ERROR_DS_NONEXISTENT_MAY_HAVE
//
// MessageText:
//
// Schema update failed: attribute in may-contain does not exist.
//
#define ERROR_DS_NONEXISTENT_MAY_HAVE
8387L
//
// MessageId: ERROR_DS_NONEXISTENT_MUST_HAVE
//
// MessageText:
//
// Schema update failed: attribute in must-contain does not exist.
//
#define ERROR_DS_NONEXISTENT_MUST_HAVE 8388L
//
// MessageId: ERROR_DS_AUX_CLS_TEST_FAIL
//
// MessageText:
//
// Schema update failed: class in aux-class list does not exist or is
not an auxiliary class.
//
#define
ERROR_DS_AUX_CLS_TEST_FAIL
8389L
//
// MessageId: ERROR_DS_NONEXISTENT_POSS_SUP
//
// MessageText:
//
// Schema update failed: class in poss-superiors does not exist.
//
#define ERROR_DS_NONEXISTENT_POSS_SUP
8390L
//
// MessageId: ERROR_DS_SUB_CLS_TEST_FAIL
//
// MessageText:
//
// Schema update failed: class in subclassof list does not exist or
does not satisfy hierarchy rules.
//
#define
ERROR_DS_SUB_CLS_TEST_FAIL
8391L
//
// MessageId: ERROR_DS_BAD_RDN_ATT_ID_SYNTAX
//
// MessageText:
//
// Schema update failed: Rdn-Att-Id has wrong syntax.
//
#define ERROR_DS_BAD_RDN_ATT_ID_SYNTAX 8392L
//
// MessageId: ERROR_DS_EXISTS_IN_AUX_CLS
//
// MessageText:
//
// Schema deletion failed: class is used as auxiliary class.
//
#define
ERROR_DS_EXISTS_IN_AUX_CLS
8393L
//
// MessageId: ERROR_DS_EXISTS_IN_SUB_CLS
//
// MessageText:
//
// Schema deletion failed: class is used as sub class.
//
#define
ERROR_DS_EXISTS_IN_SUB_CLS
8394L
//
// MessageId: ERROR_DS_EXISTS_IN_POSS_SUP
//
// MessageText:
//
// Schema deletion failed: class is used as poss superior.
//
#define
ERROR_DS_EXISTS_IN_POSS_SUP
8395L
//
// MessageId: ERROR_DS_RECALCSCHEMA_FAILED
//
// MessageText:
//
// Schema update failed in recalculating validation cache.
//
#define
ERROR_DS_RECALCSCHEMA_FAILED
8396L
//
// MessageId: ERROR_DS_TREE_DELETE_NOT_FINISHED
//
// MessageText:
//
// The tree deletion is not finished. The request must be made again to
continue deleting the tree.
//
#define ERROR_DS_TREE_DELETE_NOT_FINISHED 8397L
//
// MessageId: ERROR_DS_CANT_DELETE
//
// MessageText:
//
// The requested delete operation could not be performed.
//
#define
ERROR_DS_CANT_DELETE
8398L
//
// MessageId: ERROR_DS_ATT_SCHEMA_REQ_ID
//
// MessageText:
//
// Cannot read the governs class identifier for the schema record.
//
#define
ERROR_DS_ATT_SCHEMA_REQ_ID
8399L
//
// MessageId: ERROR_DS_BAD_ATT_SCHEMA_SYNTAX
//
// MessageText:
//
// The attribute schema has bad syntax.
//
#define ERROR_DS_BAD_ATT_SCHEMA_SYNTAX 8400L
//
// MessageId: ERROR_DS_CANT_CACHE_ATT
//
// MessageText:
//
// The attribute could not be cached.
//
#define
ERROR_DS_CANT_CACHE_ATT
8401L
//
// MessageId: ERROR_DS_CANT_CACHE_CLASS
//
// MessageText:
//
// The class could not be cached.
//
#define
ERROR_DS_CANT_CACHE_CLASS
8402L
//
// MessageId: ERROR_DS_CANT_REMOVE_ATT_CACHE
//
// MessageText:
//
// The attribute could not be removed from the cache.
//
#define ERROR_DS_CANT_REMOVE_ATT_CACHE 8403L
//
// MessageId: ERROR_DS_CANT_REMOVE_CLASS_CACHE
//
// MessageText:
//
// The class could not be removed from the cache.
//
#define ERROR_DS_CANT_REMOVE_CLASS_CACHE 8404L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_DN
//
// MessageText:
//
// The distinguished name attribute could not be read.
//
#define
ERROR_DS_CANT_RETRIEVE_DN
8405L
//
// MessageId: ERROR_DS_MISSING_SUPREF
//
// MessageText:
//
//
No superior reference has been configured for the directory service.
The directory service is therefore unable to issue referrals to objects
outside this forest.
//
#define
ERROR_DS_MISSING_SUPREF
8406L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_INSTANCE
//
// MessageText:
//
// The instance type attribute could not be retrieved.
//
#define ERROR_DS_CANT_RETRIEVE_INSTANCE 8407L
//
// MessageId: ERROR_DS_CODE_INCONSISTENCY
//
// MessageText:
//
// An internal error has occurred.
//
#define
ERROR_DS_CODE_INCONSISTENCY
8408L
//
// MessageId: ERROR_DS_DATABASE_ERROR
//
// MessageText:
//
// A database error has occurred.
//
#define
ERROR_DS_DATABASE_ERROR
8409L
//
// MessageId: ERROR_DS_GOVERNSID_MISSING
//
// MessageText:
//
// The attribute GOVERNSID is missing.
//
#define
ERROR_DS_GOVERNSID_MISSING
8410L
//
// MessageId: ERROR_DS_MISSING_EXPECTED_ATT
//
// MessageText:
//
// An expected attribute is missing.
//
#define ERROR_DS_MISSING_EXPECTED_ATT
8411L
//
// MessageId: ERROR_DS_NCNAME_MISSING_CR_REF
//
// MessageText:
//
// The specified naming context is missing a cross reference.
//
#define ERROR_DS_NCNAME_MISSING_CR_REF 8412L
//
// MessageId: ERROR_DS_SECURITY_CHECKING_ERROR
//
// MessageText:
//
// A security checking error has occurred.
//
#define ERROR_DS_SECURITY_CHECKING_ERROR 8413L
//
// MessageId: ERROR_DS_SCHEMA_NOT_LOADED
//
// MessageText:
//
// The schema is not loaded.
//
#define
ERROR_DS_SCHEMA_NOT_LOADED
8414L
//
// MessageId: ERROR_DS_SCHEMA_ALLOC_FAILED
//
// MessageText:
//
// Schema allocation failed. Please check if the machine is running low
on memory.
//
#define
ERROR_DS_SCHEMA_ALLOC_FAILED
8415L
//
// MessageId: ERROR_DS_ATT_SCHEMA_REQ_SYNTAX
//
// MessageText:
//
// Failed to obtain the required syntax for the attribute schema.
//
#define ERROR_DS_ATT_SCHEMA_REQ_SYNTAX 8416L
//
// MessageId: ERROR_DS_GCVERIFY_ERROR
//
// MessageText:
//
//
The global catalog verification failed. The global catalog is not
available or does not support the operation. Some part of the directory
is currently not available.
//
#define
ERROR_DS_GCVERIFY_ERROR
8417L
//
// MessageId: ERROR_DS_DRA_SCHEMA_MISMATCH
//
// MessageText:
//
// The replication operation failed because of a schema mismatch
between the servers involved.
//
#define
ERROR_DS_DRA_SCHEMA_MISMATCH
8418L
//
// MessageId: ERROR_DS_CANT_FIND_DSA_OBJ
//
// MessageText:
//
// The DSA object could not be found.
//
#define
ERROR_DS_CANT_FIND_DSA_OBJ
8419L
//
// MessageId: ERROR_DS_CANT_FIND_EXPECTED_NC
//
// MessageText:
//
// The naming context could not be found.
//
#define ERROR_DS_CANT_FIND_EXPECTED_NC 8420L
//
// MessageId: ERROR_DS_CANT_FIND_NC_IN_CACHE
//
// MessageText:
//
// The naming context could not be found in the cache.
//
#define ERROR_DS_CANT_FIND_NC_IN_CACHE 8421L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_CHILD
//
// MessageText:
//
// The child object could not be retrieved.
//
#define
ERROR_DS_CANT_RETRIEVE_CHILD
8422L
//
// MessageId: ERROR_DS_SECURITY_ILLEGAL_MODIFY
//
// MessageText:
//
// The modification was not permitted for security reasons.
//
#define ERROR_DS_SECURITY_ILLEGAL_MODIFY 8423L
//
// MessageId: ERROR_DS_CANT_REPLACE_HIDDEN_REC
//
// MessageText:
//
// The operation cannot replace the hidden record.
//
#define ERROR_DS_CANT_REPLACE_HIDDEN_REC 8424L
//
// MessageId: ERROR_DS_BAD_HIERARCHY_FILE
//
// MessageText:
//
// The hierarchy file is invalid.
//
#define
ERROR_DS_BAD_HIERARCHY_FILE
8425L
//
// MessageId: ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED
//
// MessageText:
//
// The attempt to build the hierarchy table failed.
//
#define ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED 8426L
//
// MessageId: ERROR_DS_CONFIG_PARAM_MISSING
//
// MessageText:
//
// The directory configuration parameter is missing from the registry.
//
#define ERROR_DS_CONFIG_PARAM_MISSING
8427L
//
// MessageId: ERROR_DS_COUNTING_AB_INDICES_FAILED
//
// MessageText:
//
// The attempt to count the address book indices failed.
//
#define ERROR_DS_COUNTING_AB_INDICES_FAILED 8428L
//
// MessageId: ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED
//
// MessageText:
//
// The allocation of the hierarchy table failed.
//
#define ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED 8429L
//
// MessageId: ERROR_DS_INTERNAL_FAILURE
//
// MessageText:
//
// The directory service encountered an internal failure.
//
#define
ERROR_DS_INTERNAL_FAILURE
8430L
//
// MessageId: ERROR_DS_UNKNOWN_ERROR
//
// MessageText:
//
// The directory service encountered an unknown failure.
//
#define
ERROR_DS_UNKNOWN_ERROR
8431L
//
// MessageId: ERROR_DS_ROOT_REQUIRES_CLASS_TOP
//
// MessageText:
//
// A root object requires a class of 'top'.
//
#define ERROR_DS_ROOT_REQUIRES_CLASS_TOP 8432L
//
// MessageId: ERROR_DS_REFUSING_FSMO_ROLES
//
// MessageText:
//
// This directory server is shutting down, and cannot take ownership of
new floating single-master operation roles.
//
#define
ERROR_DS_REFUSING_FSMO_ROLES
8433L
//
// MessageId: ERROR_DS_MISSING_FSMO_SETTINGS
//
// MessageText:
//
//
The directory service is missing mandatory configuration information,
and is unable to determine the ownership of floating single-master
operation roles.
//
#define ERROR_DS_MISSING_FSMO_SETTINGS 8434L
//
// MessageId: ERROR_DS_UNABLE_TO_SURRENDER_ROLES
//
// MessageText:
//
//
The directory service was unable to transfer ownership of one or more
floating single-master operation roles to other servers.
//
#define ERROR_DS_UNABLE_TO_SURRENDER_ROLES 8435L
//
// MessageId: ERROR_DS_DRA_GENERIC
//
// MessageText:
//
// The replication operation failed.
//
#define
ERROR_DS_DRA_GENERIC
8436L
//
// MessageId: ERROR_DS_DRA_INVALID_PARAMETER
//
// MessageText:
//
// An invalid parameter was specified for this replication operation.
//
#define ERROR_DS_DRA_INVALID_PARAMETER 8437L
//
// MessageId: ERROR_DS_DRA_BUSY
//
// MessageText:
//
// The directory service is too busy to complete the replication
operation at this time.
//
#define
ERROR_DS_DRA_BUSY
8438L
//
// MessageId: ERROR_DS_DRA_BAD_DN
//
// MessageText:
//
// The distinguished name specified for this replication operation is
invalid.
//
#define
ERROR_DS_DRA_BAD_DN
8439L
//
// MessageId: ERROR_DS_DRA_BAD_NC
//
// MessageText:
//
// The naming context specified for this replication operation is
invalid.
//
#define
ERROR_DS_DRA_BAD_NC
8440L
//
// MessageId: ERROR_DS_DRA_DN_EXISTS
//
// MessageText:
//
// The distinguished name specified for this replication operation
already exists.
//
#define
ERROR_DS_DRA_DN_EXISTS
8441L
//
// MessageId: ERROR_DS_DRA_INTERNAL_ERROR
//
// MessageText:
//
// The replication system encountered an internal error.
//
#define
ERROR_DS_DRA_INTERNAL_ERROR
8442L
//
// MessageId: ERROR_DS_DRA_INCONSISTENT_DIT
//
// MessageText:
//
// The replication operation encountered a database inconsistency.
//
#define ERROR_DS_DRA_INCONSISTENT_DIT
8443L
//
// MessageId: ERROR_DS_DRA_CONNECTION_FAILED
//
// MessageText:
//
// The server specified for this replication operation could not be
contacted.
//
#define ERROR_DS_DRA_CONNECTION_FAILED 8444L
//
// MessageId: ERROR_DS_DRA_BAD_INSTANCE_TYPE
//
// MessageText:
//
// The replication operation encountered an object with an invalid
instance type.
//
#define ERROR_DS_DRA_BAD_INSTANCE_TYPE 8445L
//
// MessageId: ERROR_DS_DRA_OUT_OF_MEM
//
// MessageText:
//
// The replication operation failed to allocate memory.
//
#define
ERROR_DS_DRA_OUT_OF_MEM
8446L
//
// MessageId: ERROR_DS_DRA_MAIL_PROBLEM
//
// MessageText:
//
// The replication operation encountered an error with the mail system.
//
#define
ERROR_DS_DRA_MAIL_PROBLEM
8447L
//
// MessageId: ERROR_DS_DRA_REF_ALREADY_EXISTS
//
// MessageText:
//
// The replication reference information for the target server already
exists.
//
#define ERROR_DS_DRA_REF_ALREADY_EXISTS 8448L
//
// MessageId: ERROR_DS_DRA_REF_NOT_FOUND
//
// MessageText:
//
// The replication reference information for the target server does not
exist.
//
#define
ERROR_DS_DRA_REF_NOT_FOUND
8449L
//
// MessageId: ERROR_DS_DRA_OBJ_IS_REP_SOURCE
//
// MessageText:
//
// The naming context cannot be removed because it is replicated to
another server.
//
#define ERROR_DS_DRA_OBJ_IS_REP_SOURCE 8450L
//
// MessageId: ERROR_DS_DRA_DB_ERROR
//
// MessageText:
//
// The replication operation encountered a database error.
//
#define
ERROR_DS_DRA_DB_ERROR
8451L
//
// MessageId: ERROR_DS_DRA_NO_REPLICA
//
// MessageText:
//
// The naming context is in the process of being removed or is not
replicated from the specified server.
//
#define
ERROR_DS_DRA_NO_REPLICA
8452L
//
// MessageId: ERROR_DS_DRA_ACCESS_DENIED
//
// MessageText:
//
// Replication access was denied.
//
#define
ERROR_DS_DRA_ACCESS_DENIED
8453L
//
// MessageId: ERROR_DS_DRA_NOT_SUPPORTED
//
// MessageText:
//
// The requested operation is not supported by this version of the
directory service.
//
#define
ERROR_DS_DRA_NOT_SUPPORTED
8454L
//
// MessageId: ERROR_DS_DRA_RPC_CANCELLED
//
// MessageText:
//
// The replication remote procedure call was cancelled.
//
#define
ERROR_DS_DRA_RPC_CANCELLED
8455L
//
// MessageId: ERROR_DS_DRA_SOURCE_DISABLED
//
// MessageText:
//
// The source server is currently rejecting replication requests.
//
#define
ERROR_DS_DRA_SOURCE_DISABLED
8456L
//
// MessageId: ERROR_DS_DRA_SINK_DISABLED
//
// MessageText:
//
// The destination server is currently rejecting replication requests.
//
#define
ERROR_DS_DRA_SINK_DISABLED
8457L
//
// MessageId: ERROR_DS_DRA_NAME_COLLISION
//
// MessageText:
//
// The replication operation failed due to a collision of object names.
//
#define
ERROR_DS_DRA_NAME_COLLISION
8458L
//
// MessageId: ERROR_DS_DRA_SOURCE_REINSTALLED
//
// MessageText:
//
// The replication source has been reinstalled.
//
#define ERROR_DS_DRA_SOURCE_REINSTALLED 8459L
//
// MessageId: ERROR_DS_DRA_MISSING_PARENT
//
// MessageText:
//
// The replication operation failed because a required parent object is
missing.
//
#define
ERROR_DS_DRA_MISSING_PARENT
8460L
//
// MessageId: ERROR_DS_DRA_PREEMPTED
//
// MessageText:
//
// The replication operation was preempted.
//
#define
ERROR_DS_DRA_PREEMPTED
8461L
//
// MessageId: ERROR_DS_DRA_ABANDON_SYNC
//
// MessageText:
//
// The replication synchronization attempt was abandoned because of a
lack of updates.
//
#define
ERROR_DS_DRA_ABANDON_SYNC
8462L
//
// MessageId: ERROR_DS_DRA_SHUTDOWN
//
// MessageText:
//
// The replication operation was terminated because the system is
shutting down.
//
#define
ERROR_DS_DRA_SHUTDOWN
8463L
//
// MessageId: ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET
//
// MessageText:
//
//
Synchronization attempt failed because the destination DC is currently
waiting to synchronize new partial attributes from source. This
condition is normal if a recent schema change modified the partial
attribute set. The destination partial attribute set is not a subset of
source partial attribute set.
//
#define ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET 8464L
//
// MessageId: ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA
//
// MessageText:
//
// The replication synchronization attempt failed because a master
replica attempted to sync from a partial replica.
//
#define ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA 8465L
//
// MessageId: ERROR_DS_DRA_EXTN_CONNECTION_FAILED
//
// MessageText:
//
//
The server specified for this replication operation was contacted, but
that server was unable to contact an additional server needed to
complete the operation.
//
#define ERROR_DS_DRA_EXTN_CONNECTION_FAILED 8466L
//
// MessageId: ERROR_DS_INSTALL_SCHEMA_MISMATCH
//
// MessageText:
//
//
The version of the directory service schema of the source forest is not
compatible with the version of directory service on this computer.
//
#define ERROR_DS_INSTALL_SCHEMA_MISMATCH 8467L
//
// MessageId: ERROR_DS_DUP_LINK_ID
//
// MessageText:
//
// Schema update failed: An attribute with the same link identifier
already exists.
//
#define
ERROR_DS_DUP_LINK_ID
8468L
//
// MessageId: ERROR_DS_NAME_ERROR_RESOLVING
//
// MessageText:
//
// Name translation: Generic processing error.
//
#define ERROR_DS_NAME_ERROR_RESOLVING
8469L
//
// MessageId: ERROR_DS_NAME_ERROR_NOT_FOUND
//
// MessageText:
//
// Name translation: Could not find the name or insufficient right to
see name.
//
#define ERROR_DS_NAME_ERROR_NOT_FOUND
8470L
//
// MessageId: ERROR_DS_NAME_ERROR_NOT_UNIQUE
//
// MessageText:
//
// Name translation: Input name mapped to more than one output name.
//
#define ERROR_DS_NAME_ERROR_NOT_UNIQUE 8471L
//
// MessageId: ERROR_DS_NAME_ERROR_NO_MAPPING
//
// MessageText:
//
// Name translation: Input name found, but not the associated output
format.
//
#define ERROR_DS_NAME_ERROR_NO_MAPPING 8472L
//
// MessageId: ERROR_DS_NAME_ERROR_DOMAIN_ONLY
//
// MessageText:
//
// Name translation: Unable to resolve completely, only the domain was
found.
//
#define ERROR_DS_NAME_ERROR_DOMAIN_ONLY 8473L
//
// MessageId: ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_MAPPING
//
// MessageText:
//
// Name translation: Unable to perform purely syntactical mapping at
the client without going out to the wire.
//
#define ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_MAPPING 8474L
//
// MessageId: ERROR_DS_CONSTRUCTED_ATT_MOD
//
// MessageText:
//
// Modification of a constructed attribute is not allowed.
//
#define
ERROR_DS_CONSTRUCTED_ATT_MOD
8475L
//
// MessageId: ERROR_DS_WRONG_OM_OBJ_CLASS
//
// MessageText:
//
// The OM-Object-Class specified is incorrect for an attribute with the
specified syntax.
//
#define
ERROR_DS_WRONG_OM_OBJ_CLASS
8476L
//
// MessageId: ERROR_DS_DRA_REPL_PENDING
//
// MessageText:
//
// The replication request has been posted; waiting for reply.
//
#define
ERROR_DS_DRA_REPL_PENDING
8477L
//
// MessageId: ERROR_DS_DS_REQUIRED
//
// MessageText:
//
// The requested operation requires a directory service, and none was
available.
//
#define
ERROR_DS_DS_REQUIRED
8478L
//
// MessageId: ERROR_DS_INVALID_LDAP_DISPLAY_NAME
//
// MessageText:
//
// The LDAP display name of the class or attribute contains non-ASCII
characters.
//
#define ERROR_DS_INVALID_LDAP_DISPLAY_NAME 8479L
//
// MessageId: ERROR_DS_NON_BASE_SEARCH
//
// MessageText:
//
// The requested search operation is only supported for base searches.
//
#define
ERROR_DS_NON_BASE_SEARCH
8480L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_ATTS
//
// MessageText:
//
// The search failed to retrieve attributes from the database.
//
#define
ERROR_DS_CANT_RETRIEVE_ATTS
8481L
//
// MessageId: ERROR_DS_BACKLINK_WITHOUT_LINK
//
// MessageText:
//
// The schema update operation tried to add a backward link attribute
that has no corresponding forward link.
//
#define ERROR_DS_BACKLINK_WITHOUT_LINK 8482L
//
// MessageId: ERROR_DS_EPOCH_MISMATCH
//
// MessageText:
//
//
Source and destination of a cross-domain move do not agree on the
object's epoch number. Either source or destination does not have the
latest version of the object.
//
#define
ERROR_DS_EPOCH_MISMATCH
8483L
//
// MessageId: ERROR_DS_SRC_NAME_MISMATCH
//
// MessageText:
//
//
Source and destination of a cross-domain move do not agree on the
object's current name. Either source or destination does not have the
latest version of the object.
//
#define
ERROR_DS_SRC_NAME_MISMATCH
8484L
//
// MessageId: ERROR_DS_SRC_AND_DST_NC_IDENTICAL
//
// MessageText:
//
//
Source and destination for the cross-domain move operation are
identical. Caller should use local move operation instead of
cross-domain move operation.
//
#define ERROR_DS_SRC_AND_DST_NC_IDENTICAL 8485L
//
// MessageId: ERROR_DS_DST_NC_MISMATCH
//
// MessageText:
//
//
Source and destination for a cross-domain move are not in agreement on
the naming contexts in the forest. Either source or destination does
not have the latest version of the Partitions container.
//
#define
ERROR_DS_DST_NC_MISMATCH
8486L
//
// MessageId: ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC
//
// MessageText:
//
// Destination of a cross-domain move is not authoritative for the
destination naming context.
//
#define ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC 8487L
//
// MessageId: ERROR_DS_SRC_GUID_MISMATCH
//
// MessageText:
//
//
Source and destination of a cross-domain move do not agree on the
identity of the source object. Either source or destination does not
have the latest version of the source object.
//
#define
ERROR_DS_SRC_GUID_MISMATCH
8488L
//
// MessageId: ERROR_DS_CANT_MOVE_DELETED_OBJECT
//
// MessageText:
//
//
Object being moved across-domains is already known to be deleted by the
destination server. The source server does not have the latest version
of the source object.
//
#define ERROR_DS_CANT_MOVE_DELETED_OBJECT 8489L
//
// MessageId: ERROR_DS_PDC_OPERATION_IN_PROGRESS
//
// MessageText:
//
// Another operation which requires exclusive access to the PDC FSMO is
already in progress.
//
#define ERROR_DS_PDC_OPERATION_IN_PROGRESS 8490L
//
// MessageId: ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD
//
// MessageText:
//
//
A cross-domain move operation failed such that two versions of the
moved object exist - one each in the source and destination domains.
The destination object needs to be removed to restore the system to a
consistent state.
//
#define ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD 8491L
//
// MessageId: ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATION
//
// MessageText:
//
//
This object may not be moved across domain boundaries either because
cross-domain moves for this class are disallowed, or the object has
some special characteristics, e.g.: trust account or restricted RID,
which prevent its move.
//
#define ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATION 8492L
//
// MessageId: ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS
//
// MessageText:
//
//
Can't move objects with memberships across domain boundaries as once
moved, this would violate the membership conditions of the account
group. Remove the object from any account group memberships and retry.
//
#define ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS 8493L
//
// MessageId: ERROR_DS_NC_MUST_HAVE_NC_PARENT
//
// MessageText:
//
// A naming context head must be the immediate child of another naming
context head, not of an interior node.
//
#define ERROR_DS_NC_MUST_HAVE_NC_PARENT 8494L
//
// MessageId: ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE
//
// MessageText:
//
//
The directory cannot validate the proposed naming context name because
it does not hold a replica of the naming context above the proposed
naming context. Please ensure that the domain naming master role is
held by a server that is configured as a global catalog server, and
that the server is up to date with its replication partners. (Applies
only to Windows 2000 Domain Naming masters)
//
#define ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE 8495L
//
// MessageId: ERROR_DS_DST_DOMAIN_NOT_NATIVE
//
// MessageText:
//
// Destination domain must be in native mode.
//
#define ERROR_DS_DST_DOMAIN_NOT_NATIVE 8496L
//
// MessageId: ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER
//
// MessageText:
//
// The operation cannot be performed because the server does not have
an infrastructure container in the domain of interest.
//
#define ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER 8497L
//
// MessageId: ERROR_DS_CANT_MOVE_ACCOUNT_GROUP
//
// MessageText:
//
// Cross-domain move of non-empty account groups is not allowed.
//
#define ERROR_DS_CANT_MOVE_ACCOUNT_GROUP 8498L
//
// MessageId: ERROR_DS_CANT_MOVE_RESOURCE_GROUP
//
// MessageText:
//
// Cross-domain move of non-empty resource groups is not allowed.
//
#define ERROR_DS_CANT_MOVE_RESOURCE_GROUP 8499L
//
// MessageId: ERROR_DS_INVALID_SEARCH_FLAG
//
// MessageText:
//
// The search flags for the attribute are invalid. The ANR bit is valid
only on attributes of Unicode or Teletex strings.
//
#define
ERROR_DS_INVALID_SEARCH_FLAG
8500L
//
// MessageId: ERROR_DS_NO_TREE_DELETE_ABOVE_NC
//
// MessageText:
//
// Tree deletions starting at an object which has an NC head as a
descendant are not allowed.
//
#define ERROR_DS_NO_TREE_DELETE_ABOVE_NC 8501L
//
// MessageId: ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE
//
// MessageText:
//
// The directory service failed to lock a tree in preparation for a
tree deletion because the tree was in use.
//
#define ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE 8502L
//
// MessageId: ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE
//
// MessageText:
//
// The directory service failed to identify the list of objects to
delete while attempting a tree deletion.
//
#define ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE 8503L
//
// MessageId: ERROR_DS_SAM_INIT_FAILURE
//
// MessageText:
//
// Security Accounts Manager initialization failed because of the
following error: %1.
//
Error Status: 0x%2. Please shutdown this system and reboot into
Directory Services Restore Mode, check the event log for more detailed
information.
//
#define
ERROR_DS_SAM_INIT_FAILURE
8504L
//
// MessageId: ERROR_DS_SENSITIVE_GROUP_VIOLATION
//
// MessageText:
//
// Only an administrator can modify the membership list of an
administrative group.
//
#define ERROR_DS_SENSITIVE_GROUP_VIOLATION 8505L
//
// MessageId: ERROR_DS_CANT_MOD_PRIMARYGROUPID
//
// MessageText:
//
// Cannot change the primary group ID of a domain controller account.
//
#define ERROR_DS_CANT_MOD_PRIMARYGROUPID 8506L
//
// MessageId: ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD
//
// MessageText:
//
// An attempt is made to modify the base schema.
//
#define ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD 8507L
//
// MessageId: ERROR_DS_NONSAFE_SCHEMA_CHANGE
//
// MessageText:
//
//
Adding a new mandatory attribute to an existing class, deleting a
mandatory attribute from an existing class, or adding an optional
attribute to the special class Top that is not a backlink attribute
(directly or through inheritance, for example, by adding or deleting an
auxiliary class) is not allowed.
//
#define ERROR_DS_NONSAFE_SCHEMA_CHANGE 8508L
//
// MessageId: ERROR_DS_SCHEMA_UPDATE_DISALLOWED
//
// MessageText:
//
// Schema update is not allowed on this DC because the DC is not the
schema FSMO Role Owner.
//
#define ERROR_DS_SCHEMA_UPDATE_DISALLOWED 8509L
//
// MessageId: ERROR_DS_CANT_CREATE_UNDER_SCHEMA
//
// MessageText:
//
//
An object of this class cannot be created under the schema container.
You can only create attribute-schema and class-schema objects under the
schema container.
//
#define ERROR_DS_CANT_CREATE_UNDER_SCHEMA 8510L
//
// MessageId: ERROR_DS_INSTALL_NO_SRC_SCH_VERSION
//
// MessageText:
//
//
The replica/child install failed to get the objectVersion attribute on
the schema container on the source DC. Either the attribute is missing
on the schema container or the credentials supplied do not have
permission to read it.
//
#define ERROR_DS_INSTALL_NO_SRC_SCH_VERSION 8511L
//
// MessageId: ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE
//
// MessageText:
//
//
The replica/child install failed to read the objectVersion attribute in
the SCHEMA section of the file schema.ini in the system32 directory.
//
#define ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE 8512L
//
// MessageId: ERROR_DS_INVALID_GROUP_TYPE
//
// MessageText:
//
// The specified group type is invalid.
//
#define
ERROR_DS_INVALID_GROUP_TYPE
8513L
//
// MessageId: ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN
//
// MessageText:
//
// You cannot nest global groups in a mixed domain if the group is
security-enabled.
//
#define ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN 8514L
//
// MessageId: ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN
//
// MessageText:
//
// You cannot nest local groups in a mixed domain if the group is
security-enabled.
//
#define ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN 8515L
//
// MessageId: ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER
//
// MessageText:
//
// A global group cannot have a local group as a member.
//
#define ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER 8516L
//
// MessageId: ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER
//
// MessageText:
//
// A global group cannot have a universal group as a member.
//
#define ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER 8517L
//
// MessageId: ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER
//
// MessageText:
//
// A universal group cannot have a local group as a member.
//
#define ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER 8518L
//
// MessageId: ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER
//
// MessageText:
//
// A global group cannot have a cross-domain member.
//
#define ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER 8519L
//
// MessageId: ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER
//
// MessageText:
//
// A local group cannot have another cross domain local group as a
member.
//
#define ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER 8520L
//
// MessageId: ERROR_DS_HAVE_PRIMARY_MEMBERS
//
// MessageText:
//
// A group with primary members cannot change to a security-disabled
group.
//
#define ERROR_DS_HAVE_PRIMARY_MEMBERS
8521L
//
// MessageId: ERROR_DS_STRING_SD_CONVERSION_FAILED
//
// MessageText:
//
// The schema cache load failed to convert the string default SD on a
class-schema object.
//
#define ERROR_DS_STRING_SD_CONVERSION_FAILED 8522L
//
// MessageId: ERROR_DS_NAMING_MASTER_GC
//
// MessageText:
//
//
Only DSAs configured to be Global Catalog servers should be allowed to
hold the Domain Naming Master FSMO role. (Applies only to Windows 2000
servers)
//
#define
ERROR_DS_NAMING_MASTER_GC
8523L
//
// MessageId: ERROR_DS_DNS_LOOKUP_FAILURE
//
// MessageText:
//
// The DSA operation is unable to proceed because of a DNS lookup
failure.
//
#define
ERROR_DS_DNS_LOOKUP_FAILURE
8524L
//
// MessageId: ERROR_DS_COULDNT_UPDATE_SPNS
//
// MessageText:
//
// While processing a change to the DNS Host Name for an object, the
Service Principal Name values could not be kept in sync.
//
#define
ERROR_DS_COULDNT_UPDATE_SPNS
8525L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_SD
//
// MessageText:
//
// The Security Descriptor attribute could not be read.
//
#define
ERROR_DS_CANT_RETRIEVE_SD
8526L
//
// MessageId: ERROR_DS_KEY_NOT_UNIQUE
//
// MessageText:
//
// The object requested was not found, but an object with that key was
found.
//
#define
ERROR_DS_KEY_NOT_UNIQUE
8527L
//
// MessageId: ERROR_DS_WRONG_LINKED_ATT_SYNTAX
//
// MessageText:
//
//
The syntax of the linked attribute being added is incorrect. Forward
links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and
backlinks can only have syntax 2.5.5.1
//
#define ERROR_DS_WRONG_LINKED_ATT_SYNTAX 8528L
//
// MessageId: ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD
//
// MessageText:
//
// Security Account Manager needs to get the boot password.
//
#define ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD 8529L
//
// MessageId: ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY
//
// MessageText:
//
// Security Account Manager needs to get the boot key from floppy disk.
//
#define ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY 8530L
//
// MessageId: ERROR_DS_CANT_START
//
// MessageText:
//
// Directory Service cannot start.
//
#define
ERROR_DS_CANT_START
8531L
//
// MessageId: ERROR_DS_INIT_FAILURE
//
// MessageText:
//
// Directory Services could not start.
//
#define
ERROR_DS_INIT_FAILURE
8532L
//
// MessageId: ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION
//
// MessageText:
//
// The connection between client and server requires packet privacy or
better.
//
#define ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION 8533L
//
// MessageId: ERROR_DS_SOURCE_DOMAIN_IN_FOREST
//
// MessageText:
//
// The source domain may not be in the same forest as destination.
//
#define ERROR_DS_SOURCE_DOMAIN_IN_FOREST 8534L
//
// MessageId: ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST
//
// MessageText:
//
// The destination domain must be in the forest.
//
#define ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST 8535L
//
// MessageId: ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED
//
// MessageText:
//
// The operation requires that destination domain auditing be enabled.
//
#define ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED 8536L
//
// MessageId: ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN
//
// MessageText:
//
// The operation couldn't locate a DC for the source domain.
//
#define ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN 8537L
//
// MessageId: ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER
//
// MessageText:
//
// The source object must be a group or user.
//
#define ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER 8538L
//
// MessageId: ERROR_DS_SRC_SID_EXISTS_IN_FOREST
//
// MessageText:
//
// The source object's SID already exists in destination forest.
//
#define ERROR_DS_SRC_SID_EXISTS_IN_FOREST 8539L
//
// MessageId: ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH
//
// MessageText:
//
// The source and destination object must be of the same type.
//
#define ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH 8540L
//
// MessageId: ERROR_SAM_INIT_FAILURE
//
// MessageText:
//
// Security Accounts Manager initialization failed because of the
following error: %1.
// Error Status: 0x%2. Click OK to shut down the system and reboot into
Safe Mode. Check the event log for detailed information.
//
#define
ERROR_SAM_INIT_FAILURE
8541L
//
// MessageId: ERROR_DS_DRA_SCHEMA_INFO_SHIP
//
// MessageText:
//
// Schema information could not be included in the replication request.
//
#define ERROR_DS_DRA_SCHEMA_INFO_SHIP
8542L
//
// MessageId: ERROR_DS_DRA_SCHEMA_CONFLICT
//
// MessageText:
//
// The replication operation could not be completed due to a schema
incompatibility.
//
#define
ERROR_DS_DRA_SCHEMA_CONFLICT
8543L
//
// MessageId: ERROR_DS_DRA_EARLIER_SCHEMA_CONFLICT
//
// MessageText:
//
// The replication operation could not be completed due to a previous
schema incompatibility.
//
#define ERROR_DS_DRA_EARLIER_SCHEMA_CONFLICT 8544L
//
// MessageId: ERROR_DS_DRA_OBJ_NC_MISMATCH
//
// MessageText:
//
//
The replication update could not be applied because either the source
or the destination has not yet received information regarding a recent
cross-domain move operation.
//
#define
ERROR_DS_DRA_OBJ_NC_MISMATCH
8545L
//
// MessageId: ERROR_DS_NC_STILL_HAS_DSAS
//
// MessageText:
//
// The requested domain could not be deleted because there exist domain
controllers that still host this domain.
//
#define
ERROR_DS_NC_STILL_HAS_DSAS
8546L
//
// MessageId: ERROR_DS_GC_REQUIRED
//
// MessageText:
//
// The requested operation can be performed only on a global catalog
server.
//
#define
ERROR_DS_GC_REQUIRED
8547L
//
// MessageId: ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY
//
// MessageText:
//
// A local group can only be a member of other local groups in the same
domain.
//
#define ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY 8548L
//
// MessageId: ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS
//
// MessageText:
//
// Foreign security principals cannot be members of universal groups.
//
#define ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS 8549L
//
// MessageId: ERROR_DS_CANT_ADD_TO_GC
//
// MessageText:
//
// The attribute is not allowed to be replicated to the GC because of
security reasons.
//
#define
ERROR_DS_CANT_ADD_TO_GC
8550L
//
// MessageId: ERROR_DS_NO_CHECKPOINT_WITH_PDC
//
// MessageText:
//
// The checkpoint with the PDC could not be taken because there too
many modifications being processed currently.
//
#define ERROR_DS_NO_CHECKPOINT_WITH_PDC 8551L
//
// MessageId: ERROR_DS_SOURCE_AUDITING_NOT_ENABLED
//
// MessageText:
//
// The operation requires that source domain auditing be enabled.
//
#define ERROR_DS_SOURCE_AUDITING_NOT_ENABLED 8552L
//
// MessageId: ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC
//
// MessageText:
//
// Security principal objects can only be created inside domain naming
contexts.
//
#define ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC 8553L
//
// MessageId: ERROR_DS_INVALID_NAME_FOR_SPN
//
// MessageText:
//
// A Service Principal Name (SPN) could not be constructed because the
provided hostname is not in the necessary format.
//
#define ERROR_DS_INVALID_NAME_FOR_SPN
8554L
//
// MessageId: ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS
//
// MessageText:
//
// A Filter was passed that uses constructed attributes.
//
#define ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS 8555L
//
// MessageId: ERROR_DS_UNICODEPWD_NOT_IN_QUOTES
//
// MessageText:
//
// The unicodePwd attribute value must be enclosed in double quotes.
//
#define ERROR_DS_UNICODEPWD_NOT_IN_QUOTES 8556L
//
// MessageId: ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED
//
// MessageText:
//
//
Your computer could not be joined to the domain. You have exceeded the
maximum number of computer accounts you are allowed to create in this
domain. Contact your system administrator to have this limit reset or
increased.
//
#define ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED 8557L
//
// MessageId: ERROR_DS_MUST_BE_RUN_ON_DST_DC
//
// MessageText:
//
// For security reasons, the operation must be run on the destination
DC.
//
#define ERROR_DS_MUST_BE_RUN_ON_DST_DC 8558L
//
// MessageId: ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER
//
// MessageText:
//
// For security reasons, the source DC must be NT4SP4 or greater.
//
#define ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER 8559L
//
// MessageId: ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ
//
// MessageText:
//
//
Critical Directory Service System objects cannot be deleted during tree
delete operations. The tree delete may have been partially performed.
//
#define ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ 8560L
//
// MessageId: ERROR_DS_INIT_FAILURE_CONSOLE
//
// MessageText:
//
// Directory Services could not start because of the following error:
%1.
// Error Status: 0x%2. Please click OK to shutdown the system. You can
use the recovery console to diagnose the system further.
//
#define ERROR_DS_INIT_FAILURE_CONSOLE
8561L
//
// MessageId: ERROR_DS_SAM_INIT_FAILURE_CONSOLE
//
// MessageText:
//
// Security Accounts Manager initialization failed because of the
following error: %1.
// Error Status: 0x%2. Please click OK to shutdown the system. You can
use the recovery console to diagnose the system further.
//
#define ERROR_DS_SAM_INIT_FAILURE_CONSOLE 8562L
//
// MessageId: ERROR_DS_FOREST_VERSION_TOO_HIGH
//
// MessageText:
//
//
The version of the operating system is incompatible with the current AD
DS forest functional level or AD LDS Configuration Set functional
level. You must upgrade to a new version of the operating system before
this server can become an AD DS Domain Controller or add an AD LDS
Instance in this AD DS Forest or AD LDS Configuration Set.
//
#define ERROR_DS_FOREST_VERSION_TOO_HIGH 8563L
//
// MessageId: ERROR_DS_DOMAIN_VERSION_TOO_HIGH
//
// MessageText:
//
//
The version of the operating system installed is incompatible with the
current domain functional level. You must upgrade to a new version of
the operating system before this server can become a domain controller
in this domain.
//
#define ERROR_DS_DOMAIN_VERSION_TOO_HIGH 8564L
//
// MessageId: ERROR_DS_FOREST_VERSION_TOO_LOW
//
// MessageText:
//
//
The version of the operating system installed on this server no longer
supports the current AD DS Forest functional level or AD LDS
Configuration Set functional level. You must raise the AD DS Forest
functional level or AD LDS Configuration Set functional level before
this server can become an AD DS Domain Controller or an AD LDS Instance
in this Forest or Configuration Set.
//
#define ERROR_DS_FOREST_VERSION_TOO_LOW 8565L
//
// MessageId: ERROR_DS_DOMAIN_VERSION_TOO_LOW
//
// MessageText:
//
//
The version of the operating system installed on this server no longer
supports the current domain functional level. You must raise the domain
functional level before this server can become a domain controller in
this domain.
//
#define ERROR_DS_DOMAIN_VERSION_TOO_LOW 8566L
//
// MessageId: ERROR_DS_INCOMPATIBLE_VERSION
//
// MessageText:
//
//
The version of the operating system installed on this server is
incompatible with the functional level of the domain or forest.
//
#define ERROR_DS_INCOMPATIBLE_VERSION
8567L
//
// MessageId: ERROR_DS_LOW_DSA_VERSION
//
// MessageText:
//
//
The functional level of the domain (or forest) cannot be raised to the
requested value, because there exist one or more domain controllers in
the domain (or forest) that are at a lower incompatible functional
level.
//
#define
ERROR_DS_LOW_DSA_VERSION
8568L
//
// MessageId: ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN
//
// MessageText:
//
//
The forest functional level cannot be raised to the requested value
since one or more domains are still in mixed domain mode. All domains
in the forest must be in native mode, for you to raise the forest
functional level.
//
#define ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN 8569L
//
// MessageId: ERROR_DS_NOT_SUPPORTED_SORT_ORDER
//
// MessageText:
//
// The sort order requested is not supported.
//
#define ERROR_DS_NOT_SUPPORTED_SORT_ORDER 8570L
//
// MessageId: ERROR_DS_NAME_NOT_UNIQUE
//
// MessageText:
//
// The requested name already exists as a unique identifier.
//
#define
ERROR_DS_NAME_NOT_UNIQUE
8571L
//
// MessageId: ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4
//
// MessageText:
//
// The machine account was created pre-NT4. The account needs to be
recreated.
//
#define ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4 8572L
//
// MessageId: ERROR_DS_OUT_OF_VERSION_STORE
//
// MessageText:
//
// The database is out of version store.
//
#define ERROR_DS_OUT_OF_VERSION_STORE
8573L
//
// MessageId: ERROR_DS_INCOMPATIBLE_CONTROLS_USED
//
// MessageText:
//
// Unable to continue operation because multiple conflicting controls
were used.
//
#define ERROR_DS_INCOMPATIBLE_CONTROLS_USED 8574L
//
// MessageId: ERROR_DS_NO_REF_DOMAIN
//
// MessageText:
//
// Unable to find a valid security descriptor reference domain for this
partition.
//
#define
ERROR_DS_NO_REF_DOMAIN
8575L
//
// MessageId: ERROR_DS_RESERVED_LINK_ID
//
// MessageText:
//
// Schema update failed: The link identifier is reserved.
//
#define
ERROR_DS_RESERVED_LINK_ID
8576L
//
// MessageId: ERROR_DS_LINK_ID_NOT_AVAILABLE
//
// MessageText:
//
// Schema update failed: There are no link identifiers available.
//
#define ERROR_DS_LINK_ID_NOT_AVAILABLE 8577L
//
// MessageId: ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER
//
// MessageText:
//
// An account group cannot have a universal group as a member.
//
#define ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER 8578L
//
// MessageId: ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE
//
// MessageText:
//
// Rename or move operations on naming context heads or read-only
objects are not allowed.
//
#define ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE 8579L
//
// MessageId: ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC
//
// MessageText:
//
// Move operations on objects in the schema naming context are not
allowed.
//
#define ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC 8580L
//
// MessageId: ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG
//
// MessageText:
//
// A system flag has been set on the object and does not allow the
object to be moved or renamed.
//
#define ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG 8581L
//
// MessageId: ERROR_DS_MODIFYDN_WRONG_GRANDPARENT
//
// MessageText:
//
//
This object is not allowed to change its grandparent container. Moves
are not forbidden on this object, but are restricted to sibling
containers.
//
#define ERROR_DS_MODIFYDN_WRONG_GRANDPARENT 8582L
//
// MessageId: ERROR_DS_NAME_ERROR_TRUST_REFERRAL
//
// MessageText:
//
// Unable to resolve completely, a referral to another forest is
generated.
//
#define ERROR_DS_NAME_ERROR_TRUST_REFERRAL 8583L
//
// MessageId: ERROR_NOT_SUPPORTED_ON_STANDARD_SERVER
//
// MessageText:
//
// The requested action is not supported on standard server.
//
#define ERROR_NOT_SUPPORTED_ON_STANDARD_SERVER 8584L
//
// MessageId: ERROR_DS_CANT_ACCESS_REMOTE_PART_OF_AD
//
// MessageText:
//
//
Could not access a partition of the directory service located on a
remote server. Make sure at least one server is running for the
partition in question.
//
#define ERROR_DS_CANT_ACCESS_REMOTE_PART_OF_AD 8585L
//
// MessageId: ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2
//
// MessageText:
//
//
The directory cannot validate the proposed naming context (or
partition) name because it does not hold a replica nor can it contact a
replica of the naming context above the proposed naming context. Please
ensure that the parent naming context is properly registered in DNS,
and at least one replica of this naming context is reachable by the
Domain Naming master.
//
#define ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2 8586L
//
// MessageId: ERROR_DS_THREAD_LIMIT_EXCEEDED
//
// MessageText:
//
// The thread limit for this request was exceeded.
//
#define ERROR_DS_THREAD_LIMIT_EXCEEDED 8587L
//
// MessageId: ERROR_DS_NOT_CLOSEST
//
// MessageText:
//
// The Global catalog server is not in the closest site.
//
#define
ERROR_DS_NOT_CLOSEST
8588L
//
// MessageId: ERROR_DS_CANT_DERIVE_SPN_WITHOUT_SERVER_REF
//
// MessageText:
//
//
The DS cannot derive a service principal name (SPN) with which to
mutually authenticate the target server because the corresponding
server object in the local DS database has no serverReference attribute.
//
#define ERROR_DS_CANT_DERIVE_SPN_WITHOUT_SERVER_REF 8589L
//
// MessageId: ERROR_DS_SINGLE_USER_MODE_FAILED
//
// MessageText:
//
// The Directory Service failed to enter single user mode.
//
#define ERROR_DS_SINGLE_USER_MODE_FAILED 8590L
//
// MessageId: ERROR_DS_NTDSCRIPT_SYNTAX_ERROR
//
// MessageText:
//
// The Directory Service cannot parse the script because of a syntax
error.
//
#define ERROR_DS_NTDSCRIPT_SYNTAX_ERROR 8591L
//
// MessageId: ERROR_DS_NTDSCRIPT_PROCESS_ERROR
//
// MessageText:
//
// The Directory Service cannot process the script because of an error.
//
#define ERROR_DS_NTDSCRIPT_PROCESS_ERROR 8592L
//
// MessageId: ERROR_DS_DIFFERENT_REPL_EPOCHS
//
// MessageText:
//
//
The directory service cannot perform the requested operation because
the servers involved are of different replication epochs (which is
usually related to a domain rename that is in progress).
//
#define ERROR_DS_DIFFERENT_REPL_EPOCHS 8593L
//
// MessageId: ERROR_DS_DRS_EXTENSIONS_CHANGED
//
// MessageText:
//
// The directory service binding must be renegotiated due to a change
in the server extensions information.
//
#define ERROR_DS_DRS_EXTENSIONS_CHANGED 8594L
//
// MessageId: ERROR_DS_REPLICA_SET_CHANGE_NOT_ALLOWED_ON_DISABLED_CR
//
// MessageText:
//
// Operation not allowed on a disabled cross ref.
//
#define ERROR_DS_REPLICA_SET_CHANGE_NOT_ALLOWED_ON_DISABLED_CR 8595L
//
// MessageId: ERROR_DS_NO_MSDS_INTID
//
// MessageText:
//
// Schema update failed: No values for msDS-IntId are available.
//
#define
ERROR_DS_NO_MSDS_INTID
8596L
//
// MessageId: ERROR_DS_DUP_MSDS_INTID
//
// MessageText:
//
// Schema update failed: Duplicate msDS-INtId. Retry the operation.
//
#define
ERROR_DS_DUP_MSDS_INTID
8597L
//
// MessageId: ERROR_DS_EXISTS_IN_RDNATTID
//
// MessageText:
//
// Schema deletion failed: attribute is used in rDNAttID.
//
#define
ERROR_DS_EXISTS_IN_RDNATTID
8598L
//
// MessageId: ERROR_DS_AUTHORIZATION_FAILED
//
// MessageText:
//
// The directory service failed to authorize the request.
//
#define ERROR_DS_AUTHORIZATION_FAILED
8599L
//
// MessageId: ERROR_DS_INVALID_SCRIPT
//
// MessageText:
//
// The Directory Service cannot process the script because it is
invalid.
//
#define
ERROR_DS_INVALID_SCRIPT
8600L
//
// MessageId: ERROR_DS_REMOTE_CROSSREF_OP_FAILED
//
// MessageText:
//
//
The remote create cross reference operation failed on the Domain Naming
Master FSMO. The operation's error is in the extended data.
//
#define ERROR_DS_REMOTE_CROSSREF_OP_FAILED 8601L
//
// MessageId: ERROR_DS_CROSS_REF_BUSY
//
// MessageText:
//
// A cross reference is in use locally with the same name.
//
#define
ERROR_DS_CROSS_REF_BUSY
8602L
//
// MessageId: ERROR_DS_CANT_DERIVE_SPN_FOR_DELETED_DOMAIN
//
// MessageText:
//
//
The DS cannot derive a service principal name (SPN) with which to
mutually authenticate the target server because the server's domain has
been deleted from the forest.
//
#define ERROR_DS_CANT_DERIVE_SPN_FOR_DELETED_DOMAIN 8603L
//
// MessageId: ERROR_DS_CANT_DEMOTE_WITH_WRITEABLE_NC
//
// MessageText:
//
// Writeable NCs prevent this DC from demoting.
//
#define ERROR_DS_CANT_DEMOTE_WITH_WRITEABLE_NC 8604L
//
// MessageId: ERROR_DS_DUPLICATE_ID_FOUND
//
// MessageText:
//
// The requested object has a non-unique identifier and cannot be
retrieved.
//
#define
ERROR_DS_DUPLICATE_ID_FOUND
8605L
//
// MessageId: ERROR_DS_INSUFFICIENT_ATTR_TO_CREATE_OBJECT
//
// MessageText:
//
//
Insufficient attributes were given to create an object. This object may
not exist because it may have been deleted and already garbage
collected.
//
#define ERROR_DS_INSUFFICIENT_ATTR_TO_CREATE_OBJECT 8606L
//
// MessageId: ERROR_DS_GROUP_CONVERSION_ERROR
//
// MessageText:
//
// The group cannot be converted due to attribute restrictions on the
requested group type.
//
#define ERROR_DS_GROUP_CONVERSION_ERROR 8607L
//
// MessageId: ERROR_DS_CANT_MOVE_APP_BASIC_GROUP
//
// MessageText:
//
// Cross-domain move of non-empty basic application groups is not
allowed.
//
#define ERROR_DS_CANT_MOVE_APP_BASIC_GROUP 8608L
//
// MessageId: ERROR_DS_CANT_MOVE_APP_QUERY_GROUP
//
// MessageText:
//
// Cross-domain move of non-empty query based application groups is not
allowed.
//
#define ERROR_DS_CANT_MOVE_APP_QUERY_GROUP 8609L
//
// MessageId: ERROR_DS_ROLE_NOT_VERIFIED
//
// MessageText:
//
//
The FSMO role ownership could not be verified because its directory
partition has not replicated successfully with at least one replication
partner.
//
#define
ERROR_DS_ROLE_NOT_VERIFIED
8610L
//
// MessageId: ERROR_DS_WKO_CONTAINER_CANNOT_BE_SPECIAL
//
// MessageText:
//
// The target container for a redirection of a well known object
container cannot already be a special container.
//
#define ERROR_DS_WKO_CONTAINER_CANNOT_BE_SPECIAL 8611L
//
// MessageId: ERROR_DS_DOMAIN_RENAME_IN_PROGRESS
//
// MessageText:
//
// The Directory Service cannot perform the requested operation because
a domain rename operation is in progress.
//
#define ERROR_DS_DOMAIN_RENAME_IN_PROGRESS 8612L
//
// MessageId: ERROR_DS_EXISTING_AD_CHILD_NC
//
// MessageText:
//
//
The directory service detected a child partition below the requested
partition name. The partition hierarchy must be created in a top down
method.
//
#define ERROR_DS_EXISTING_AD_CHILD_NC
8613L
//
// MessageId: ERROR_DS_REPL_LIFETIME_EXCEEDED
//
// MessageText:
//
//
The directory service cannot replicate with this server because the
time since the last replication with this server has exceeded the
tombstone lifetime.
//
#define ERROR_DS_REPL_LIFETIME_EXCEEDED 8614L
//
// MessageId: ERROR_DS_DISALLOWED_IN_SYSTEM_CONTAINER
//
// MessageText:
//
// The requested operation is not allowed on an object under the system
container.
//
#define ERROR_DS_DISALLOWED_IN_SYSTEM_CONTAINER 8615L
//
// MessageId: ERROR_DS_LDAP_SEND_QUEUE_FULL
//
// MessageText:
//
//
The LDAP servers network send queue has filled up because the client is
not processing the results of it's requests fast enough. No more
requests will be processed until the client catches up. If the client
does not catch up then it will be disconnected.
//
#define ERROR_DS_LDAP_SEND_QUEUE_FULL
8616L
//
// MessageId: ERROR_DS_DRA_OUT_SCHEDULE_WINDOW
//
// MessageText:
//
//
The scheduled replication did not take place because the system was too
busy to execute the request within the schedule window. The replication
queue is overloaded. Consider reducing the number of partners or
decreasing the scheduled replication frequency.
//
#define ERROR_DS_DRA_OUT_SCHEDULE_WINDOW 8617L
//
// MessageId: ERROR_DS_POLICY_NOT_KNOWN
//
// MessageText:
//
//
At this time, it cannot be determined if the branch replication policy
is available on the hub domain controller. Please retry at a later time
to account for replication latencies.
//
#define
ERROR_DS_POLICY_NOT_KNOWN
8618L
//
// MessageId: ERROR_NO_SITE_SETTINGS_OBJECT
//
// MessageText:
//
// The site settings object for the specified site does not exist.
//
#define ERROR_NO_SITE_SETTINGS_OBJECT
8619L
//
// MessageId: ERROR_NO_SECRETS
//
// MessageText:
//
// The local account store does not contain secret material for the
specified account.
//
#define
ERROR_NO_SECRETS
8620L
//
// MessageId: ERROR_NO_WRITABLE_DC_FOUND
//
// MessageText:
//
// Could not find a writable domain controller in the domain.
//
#define
ERROR_NO_WRITABLE_DC_FOUND
8621L
//
// MessageId: ERROR_DS_NO_SERVER_OBJECT
//
// MessageText:
//
// The server object for the domain controller does not exist.
//
#define
ERROR_DS_NO_SERVER_OBJECT
8622L
//
// MessageId: ERROR_DS_NO_NTDSA_OBJECT
//
// MessageText:
//
// The NTDS Settings object for the domain controller does not exist.
//
#define
ERROR_DS_NO_NTDSA_OBJECT
8623L
//
// MessageId: ERROR_DS_NON_ASQ_SEARCH
//
// MessageText:
//
// The requested search operation is not supported for ASQ searches.
//
#define
ERROR_DS_NON_ASQ_SEARCH
8624L
//
// MessageId: ERROR_DS_AUDIT_FAILURE
//
// MessageText:
//
// A required audit event could not be generated for the operation.
//
#define
ERROR_DS_AUDIT_FAILURE
8625L
//
// MessageId: ERROR_DS_INVALID_SEARCH_FLAG_SUBTREE
//
// MessageText:
//
// The search flags for the attribute are invalid. The subtree index
bit is valid only on single valued attributes.
//
#define ERROR_DS_INVALID_SEARCH_FLAG_SUBTREE 8626L
//
// MessageId: ERROR_DS_INVALID_SEARCH_FLAG_TUPLE
//
// MessageText:
//
// The search flags for the attribute are invalid. The tuple index bit
is valid only on attributes of Unicode strings.
//
#define ERROR_DS_INVALID_SEARCH_FLAG_TUPLE 8627L
//
// MessageId: ERROR_DS_HIERARCHY_TABLE_TOO_DEEP
//
// MessageText:
//
// The address books are nested too deeply. Failed to build the
hierarchy table.
//
#define ERROR_DS_HIERARCHY_TABLE_TOO_DEEP 8628L
//
// MessageId: ERROR_DS_DRA_CORRUPT_UTD_VECTOR
//
// MessageText:
//
// The specified up-to-date-ness vector is corrupt.
//
#define ERROR_DS_DRA_CORRUPT_UTD_VECTOR 8629L
//
// MessageId: ERROR_DS_DRA_SECRETS_DENIED
//
// MessageText:
//
// The request to replicate secrets is denied.
//
#define
ERROR_DS_DRA_SECRETS_DENIED
8630L
//
// MessageId: ERROR_DS_RESERVED_MAPI_ID
//
// MessageText:
//
// Schema update failed: The MAPI identifier is reserved.
//
#define
ERROR_DS_RESERVED_MAPI_ID
8631L
//
// MessageId: ERROR_DS_MAPI_ID_NOT_AVAILABLE
//
// MessageText:
//
// Schema update failed: There are no MAPI identifiers available.
//
#define ERROR_DS_MAPI_ID_NOT_AVAILABLE 8632L
//
// MessageId: ERROR_DS_DRA_MISSING_KRBTGT_SECRET
//
// MessageText:
//
// The replication operation failed because the required attributes of
the local krbtgt object are missing.
//
#define ERROR_DS_DRA_MISSING_KRBTGT_SECRET 8633L
//
// MessageId: ERROR_DS_DOMAIN_NAME_EXISTS_IN_FOREST
//
// MessageText:
//
// The domain name of the trusted domain already exists in the forest.
//
#define ERROR_DS_DOMAIN_NAME_EXISTS_IN_FOREST 8634L
//
// MessageId: ERROR_DS_FLAT_NAME_EXISTS_IN_FOREST
//
// MessageText:
//
// The flat name of the trusted domain already exists in the forest.
//
#define ERROR_DS_FLAT_NAME_EXISTS_IN_FOREST 8635L
//
// MessageId: ERROR_INVALID_USER_PRINCIPAL_NAME
//
// MessageText:
//
// The User Principal Name (UPN) is invalid.
//
#define ERROR_INVALID_USER_PRINCIPAL_NAME 8636L
//
// MessageId: ERROR_DS_OID_MAPPED_GROUP_CANT_HAVE_MEMBERS
//
// MessageText:
//
// OID mapped groups cannot have members.
//
#define ERROR_DS_OID_MAPPED_GROUP_CANT_HAVE_MEMBERS 8637L
//
// MessageId: ERROR_DS_OID_NOT_FOUND
//
// MessageText:
//
// The specified OID cannot be found.
//
#define
ERROR_DS_OID_NOT_FOUND
8638L
//
// MessageId: ERROR_DS_DRA_RECYCLED_TARGET
//
// MessageText:
//
// The replication operation failed because the target object referred
by a link value is recycled.
//
#define
ERROR_DS_DRA_RECYCLED_TARGET
8639L
///////////////////////////////////////////////////
//
/
//
End of Active Directory Error
Codes /
//
/
//
8000 to
8999
/
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
DNS Error
codes
//
//
//
//
9000 to
9999
//
///////////////////////////////////////////////////
//
=============================
// Facility DNS Error Messages
// =============================
//
// DNS response codes.
//
#define DNS_ERROR_RESPONSE_CODES_BASE 9000
#define DNS_ERROR_RCODE_NO_ERROR NO_ERROR
#define DNS_ERROR_MASK 0x00002328 // 9000 or DNS_ERROR_RESPONSE_CODES_BASE
//
DNS_ERROR_RCODE_FORMAT_ERROR
0x00002329
//
// MessageId: DNS_ERROR_RCODE_FORMAT_ERROR
//
// MessageText:
//
// DNS server unable to interpret format.
//
#define
DNS_ERROR_RCODE_FORMAT_ERROR
9001L
//
DNS_ERROR_RCODE_SERVER_FAILURE
0x0000232a
//
// MessageId: DNS_ERROR_RCODE_SERVER_FAILURE
//
// MessageText:
//
// DNS server failure.
//
#define DNS_ERROR_RCODE_SERVER_FAILURE 9002L
//
DNS_ERROR_RCODE_NAME_ERROR
0x0000232b
//
// MessageId: DNS_ERROR_RCODE_NAME_ERROR
//
// MessageText:
//
// DNS name does not exist.
//
#define
DNS_ERROR_RCODE_NAME_ERROR
9003L
//
DNS_ERROR_RCODE_NOT_IMPLEMENTED
0x0000232c
//
// MessageId: DNS_ERROR_RCODE_NOT_IMPLEMENTED
//
// MessageText:
//
// DNS request not supported by name server.
//
#define DNS_ERROR_RCODE_NOT_IMPLEMENTED 9004L
//
DNS_ERROR_RCODE_REFUSED
0x0000232d
//
// MessageId: DNS_ERROR_RCODE_REFUSED
//
// MessageText:
//
// DNS operation refused.
//
#define
DNS_ERROR_RCODE_REFUSED
9005L
//
DNS_ERROR_RCODE_YXDOMAIN
0x0000232e
//
// MessageId: DNS_ERROR_RCODE_YXDOMAIN
//
// MessageText:
//
// DNS name that ought not exist, does exist.
//
#define
DNS_ERROR_RCODE_YXDOMAIN
9006L
//
DNS_ERROR_RCODE_YXRRSET
0x0000232f
//
// MessageId: DNS_ERROR_RCODE_YXRRSET
//
// MessageText:
//
// DNS RR set that ought not exist, does exist.
//
#define
DNS_ERROR_RCODE_YXRRSET
9007L
//
DNS_ERROR_RCODE_NXRRSET
0x00002330
//
// MessageId: DNS_ERROR_RCODE_NXRRSET
//
// MessageText:
//
// DNS RR set that ought to exist, does not exist.
//
#define
DNS_ERROR_RCODE_NXRRSET
9008L
//
DNS_ERROR_RCODE_NOTAUTH
0x00002331
//
// MessageId: DNS_ERROR_RCODE_NOTAUTH
//
// MessageText:
//
// DNS server not authoritative for zone.
//
#define
DNS_ERROR_RCODE_NOTAUTH
9009L
//
DNS_ERROR_RCODE_NOTZONE
0x00002332
//
// MessageId: DNS_ERROR_RCODE_NOTZONE
//
// MessageText:
//
// DNS name in update or prereq is not in zone.
//
#define
DNS_ERROR_RCODE_NOTZONE
9010L
//
DNS_ERROR_RCODE_BADSIG
0x00002338
//
// MessageId: DNS_ERROR_RCODE_BADSIG
//
// MessageText:
//
// DNS signature failed to verify.
//
#define
DNS_ERROR_RCODE_BADSIG
9016L
//
DNS_ERROR_RCODE_BADKEY
0x00002339
//
// MessageId: DNS_ERROR_RCODE_BADKEY
//
// MessageText:
//
// DNS bad key.
//
#define
DNS_ERROR_RCODE_BADKEY
9017L
//
DNS_ERROR_RCODE_BADTIME
0x0000233a
//
// MessageId: DNS_ERROR_RCODE_BADTIME
//
// MessageText:
//
// DNS signature validity expired.
//
#define
DNS_ERROR_RCODE_BADTIME
9018L
#define DNS_ERROR_RCODE_LAST DNS_ERROR_RCODE_BADTIME
//
// Packet format
//
#define DNS_ERROR_PACKET_FMT_BASE 9500
//
DNS_INFO_NO_RECORDS
0x0000251d
//
// MessageId: DNS_INFO_NO_RECORDS
//
// MessageText:
//
// No records found for given DNS query.
//
#define
DNS_INFO_NO_RECORDS
9501L
//
DNS_ERROR_BAD_PACKET
0x0000251e
//
// MessageId: DNS_ERROR_BAD_PACKET
//
// MessageText:
//
// Bad DNS packet.
//
#define
DNS_ERROR_BAD_PACKET
9502L
//
DNS_ERROR_NO_PACKET
0x0000251f
//
// MessageId: DNS_ERROR_NO_PACKET
//
// MessageText:
//
// No DNS packet.
//
#define
DNS_ERROR_NO_PACKET
9503L
//
DNS_ERROR_RCODE
0x00002520
//
// MessageId: DNS_ERROR_RCODE
//
// MessageText:
//
// DNS error, check rcode.
//
#define
DNS_ERROR_RCODE
9504L
//
DNS_ERROR_UNSECURE_PACKET
0x00002521
//
// MessageId: DNS_ERROR_UNSECURE_PACKET
//
// MessageText:
//
// Unsecured DNS packet.
//
#define
DNS_ERROR_UNSECURE_PACKET
9505L
#define DNS_STATUS_PACKET_UNSECURE DNS_ERROR_UNSECURE_PACKET
//
// General API errors
//
#define
DNS_ERROR_NO_MEMORY
ERROR_OUTOFMEMORY
#define
DNS_ERROR_INVALID_NAME
ERROR_INVALID_NAME
#define
DNS_ERROR_INVALID_DATA
ERROR_INVALID_DATA
#define DNS_ERROR_GENERAL_API_BASE 9550
//
DNS_ERROR_INVALID_TYPE
0x0000254f
//
// MessageId: DNS_ERROR_INVALID_TYPE
//
// MessageText:
//
// Invalid DNS type.
//
#define
DNS_ERROR_INVALID_TYPE
9551L
//
DNS_ERROR_INVALID_IP_ADDRESS
0x00002550
//
// MessageId: DNS_ERROR_INVALID_IP_ADDRESS
//
// MessageText:
//
// Invalid IP address.
//
#define
DNS_ERROR_INVALID_IP_ADDRESS
9552L
//
DNS_ERROR_INVALID_PROPERTY
0x00002551
//
// MessageId: DNS_ERROR_INVALID_PROPERTY
//
// MessageText:
//
// Invalid property.
//
#define
DNS_ERROR_INVALID_PROPERTY
9553L
//
DNS_ERROR_TRY_AGAIN_LATER
0x00002552
//
// MessageId: DNS_ERROR_TRY_AGAIN_LATER
//
// MessageText:
//
// Try DNS operation again later.
//
#define
DNS_ERROR_TRY_AGAIN_LATER
9554L
//
DNS_ERROR_NOT_UNIQUE
0x00002553
//
// MessageId: DNS_ERROR_NOT_UNIQUE
//
// MessageText:
//
// Record for given name and type is not unique.
//
#define
DNS_ERROR_NOT_UNIQUE
9555L
//
DNS_ERROR_NON_RFC_NAME
0x00002554
//
// MessageId: DNS_ERROR_NON_RFC_NAME
//
// MessageText:
//
// DNS name does not comply with RFC specifications.
//
#define
DNS_ERROR_NON_RFC_NAME
9556L
//
DNS_STATUS_FQDN
0x00002555
//
// MessageId: DNS_STATUS_FQDN
//
// MessageText:
//
// DNS name is a fully-qualified DNS name.
//
#define
DNS_STATUS_FQDN
9557L
//
DNS_STATUS_DOTTED_NAME
0x00002556
//
// MessageId: DNS_STATUS_DOTTED_NAME
//
// MessageText:
//
// DNS name is dotted (multi-label).
//
#define
DNS_STATUS_DOTTED_NAME
9558L
//
DNS_STATUS_SINGLE_PART_NAME
0x00002557
//
// MessageId: DNS_STATUS_SINGLE_PART_NAME
//
// MessageText:
//
// DNS name is a single-part name.
//
#define
DNS_STATUS_SINGLE_PART_NAME
9559L
//
DNS_ERROR_INVALID_NAME_CHAR
0x00002558
//
// MessageId: DNS_ERROR_INVALID_NAME_CHAR
//
// MessageText:
//
// DNS name contains an invalid character.
//
#define
DNS_ERROR_INVALID_NAME_CHAR
9560L
//
DNS_ERROR_NUMERIC_NAME
0x00002559
//
// MessageId: DNS_ERROR_NUMERIC_NAME
//
// MessageText:
//
// DNS name is entirely numeric.
//
#define
DNS_ERROR_NUMERIC_NAME
9561L
//
DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER 0x0000255A
//
// MessageId: DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER
//
// MessageText:
//
// The operation requested is not permitted on a DNS root server.
//
#define DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER 9562L
//
DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION 0x0000255B
//
// MessageId: DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION
//
// MessageText:
//
// The record could not be created because this part of the DNS
namespace has been delegated to another server.
//
#define DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION 9563L
//
DNS_ERROR_CANNOT_FIND_ROOT_HINTS 0x0000255C
//
// MessageId: DNS_ERROR_CANNOT_FIND_ROOT_HINTS
//
// MessageText:
//
// The DNS server could not find a set of root hints.
//
#define DNS_ERROR_CANNOT_FIND_ROOT_HINTS 9564L
//
DNS_ERROR_INCONSISTENT_ROOT_HINTS 0x0000255D
//
// MessageId: DNS_ERROR_INCONSISTENT_ROOT_HINTS
//
// MessageText:
//
// The DNS server found root hints but they were not consistent across
all adapters.
//
#define DNS_ERROR_INCONSISTENT_ROOT_HINTS 9565L
//
DNS_ERROR_DWORD_VALUE_TOO_SMALL 0x0000255E
//
// MessageId: DNS_ERROR_DWORD_VALUE_TOO_SMALL
//
// MessageText:
//
// The specified value is too small for this parameter.
//
#define DNS_ERROR_DWORD_VALUE_TOO_SMALL 9566L
//
DNS_ERROR_DWORD_VALUE_TOO_LARGE 0x0000255F
//
// MessageId: DNS_ERROR_DWORD_VALUE_TOO_LARGE
//
// MessageText:
//
// The specified value is too large for this parameter.
//
#define DNS_ERROR_DWORD_VALUE_TOO_LARGE 9567L
//
DNS_ERROR_BACKGROUND_LOADING
0x00002560
//
// MessageId: DNS_ERROR_BACKGROUND_LOADING
//
// MessageText:
//
// This operation is not allowed while the DNS server is loading zones
in the background. Please try again later.
//
#define
DNS_ERROR_BACKGROUND_LOADING
9568L
//
DNS_ERROR_NOT_ALLOWED_ON_RODC
0x00002561
//
// MessageId: DNS_ERROR_NOT_ALLOWED_ON_RODC
//
// MessageText:
//
// The operation requested is not permitted on against a DNS server
running on a read-only DC.
//
#define DNS_ERROR_NOT_ALLOWED_ON_RODC
9569L
//
DNS_ERROR_NOT_ALLOWED_UNDER_DNAME 0x00002562
//
// MessageId: DNS_ERROR_NOT_ALLOWED_UNDER_DNAME
//
// MessageText:
//
// No data is allowed to exist underneath a DNAME record.
//
#define DNS_ERROR_NOT_ALLOWED_UNDER_DNAME 9570L
//
DNS_ERROR_DELEGATION_REQUIRED
0x00002563
//
// MessageId: DNS_ERROR_DELEGATION_REQUIRED
//
// MessageText:
//
// This operation requires credentials delegation.
//
#define DNS_ERROR_DELEGATION_REQUIRED
9571L
//
DNS_ERROR_INVALID_POLICY_TABLE
0x00002564
//
// MessageId: DNS_ERROR_INVALID_POLICY_TABLE
//
// MessageText:
//
//
Name resolution policy table has been corrupted. DNS resolution will
fail until it is fixed. Contact your network administrator.
//
#define DNS_ERROR_INVALID_POLICY_TABLE 9572L
//
// Zone errors
//
#define DNS_ERROR_ZONE_BASE 9600
//
DNS_ERROR_ZONE_DOES_NOT_EXIST
0x00002581
//
// MessageId: DNS_ERROR_ZONE_DOES_NOT_EXIST
//
// MessageText:
//
// DNS zone does not exist.
//
#define DNS_ERROR_ZONE_DOES_NOT_EXIST
9601L
//
DNS_ERROR_NO_ZONE_INFO
0x00002582
//
// MessageId: DNS_ERROR_NO_ZONE_INFO
//
// MessageText:
//
// DNS zone information not available.
//
#define
DNS_ERROR_NO_ZONE_INFO
9602L
//
DNS_ERROR_INVALID_ZONE_OPERATION
0x00002583
//
// MessageId: DNS_ERROR_INVALID_ZONE_OPERATION
//
// MessageText:
//
// Invalid operation for DNS zone.
//
#define DNS_ERROR_INVALID_ZONE_OPERATION 9603L
//
DNS_ERROR_ZONE_CONFIGURATION_ERROR
0x00002584
//
// MessageId: DNS_ERROR_ZONE_CONFIGURATION_ERROR
//
// MessageText:
//
// Invalid DNS zone configuration.
//
#define DNS_ERROR_ZONE_CONFIGURATION_ERROR 9604L
//
DNS_ERROR_ZONE_HAS_NO_SOA_RECORD
0x00002585
//
// MessageId: DNS_ERROR_ZONE_HAS_NO_SOA_RECORD
//
// MessageText:
//
// DNS zone has no start of authority (SOA) record.
//
#define DNS_ERROR_ZONE_HAS_NO_SOA_RECORD 9605L
//
DNS_ERROR_ZONE_HAS_NO_NS_RECORDS
0x00002586
//
// MessageId: DNS_ERROR_ZONE_HAS_NO_NS_RECORDS
//
// MessageText:
//
// DNS zone has no Name Server (NS) record.
//
#define DNS_ERROR_ZONE_HAS_NO_NS_RECORDS 9606L
//
DNS_ERROR_ZONE_LOCKED
0x00002587
//
// MessageId: DNS_ERROR_ZONE_LOCKED
//
// MessageText:
//
// DNS zone is locked.
//
#define
DNS_ERROR_ZONE_LOCKED
9607L
//
DNS_ERROR_ZONE_CREATION_FAILED
0x00002588
//
// MessageId: DNS_ERROR_ZONE_CREATION_FAILED
//
// MessageText:
//
// DNS zone creation failed.
//
#define DNS_ERROR_ZONE_CREATION_FAILED 9608L
//
DNS_ERROR_ZONE_ALREADY_EXISTS
0x00002589
//
// MessageId: DNS_ERROR_ZONE_ALREADY_EXISTS
//
// MessageText:
//
// DNS zone already exists.
//
#define DNS_ERROR_ZONE_ALREADY_EXISTS
9609L
//
DNS_ERROR_AUTOZONE_ALREADY_EXISTS
0x0000258a
//
// MessageId: DNS_ERROR_AUTOZONE_ALREADY_EXISTS
//
// MessageText:
//
// DNS automatic zone already exists.
//
#define DNS_ERROR_AUTOZONE_ALREADY_EXISTS 9610L
//
DNS_ERROR_INVALID_ZONE_TYPE
0x0000258b
//
// MessageId: DNS_ERROR_INVALID_ZONE_TYPE
//
// MessageText:
//
// Invalid DNS zone type.
//
#define
DNS_ERROR_INVALID_ZONE_TYPE
9611L
//
DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP 0x0000258c
//
// MessageId: DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP
//
// MessageText:
//
// Secondary DNS zone requires master IP address.
//
#define DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP 9612L
//
DNS_ERROR_ZONE_NOT_SECONDARY
0x0000258d
//
// MessageId: DNS_ERROR_ZONE_NOT_SECONDARY
//
// MessageText:
//
// DNS zone not secondary.
//
#define
DNS_ERROR_ZONE_NOT_SECONDARY
9613L
//
DNS_ERROR_NEED_SECONDARY_ADDRESSES
0x0000258e
//
// MessageId: DNS_ERROR_NEED_SECONDARY_ADDRESSES
//
// MessageText:
//
// Need secondary IP address.
//
#define DNS_ERROR_NEED_SECONDARY_ADDRESSES 9614L
//
DNS_ERROR_WINS_INIT_FAILED
0x0000258f
//
// MessageId: DNS_ERROR_WINS_INIT_FAILED
//
// MessageText:
//
// WINS initialization failed.
//
#define
DNS_ERROR_WINS_INIT_FAILED
9615L
//
DNS_ERROR_NEED_WINS_SERVERS
0x00002590
//
// MessageId: DNS_ERROR_NEED_WINS_SERVERS
//
// MessageText:
//
// Need WINS servers.
//
#define
DNS_ERROR_NEED_WINS_SERVERS
9616L
//
DNS_ERROR_NBSTAT_INIT_FAILED
0x00002591
//
// MessageId: DNS_ERROR_NBSTAT_INIT_FAILED
//
// MessageText:
//
// NBTSTAT initialization call failed.
//
#define
DNS_ERROR_NBSTAT_INIT_FAILED
9617L
//
DNS_ERROR_SOA_DELETE_INVALID
0x00002592
//
// MessageId: DNS_ERROR_SOA_DELETE_INVALID
//
// MessageText:
//
// Invalid delete of start of authority (SOA)
//
#define
DNS_ERROR_SOA_DELETE_INVALID
9618L
//
DNS_ERROR_FORWARDER_ALREADY_EXISTS
0x00002593
//
// MessageId: DNS_ERROR_FORWARDER_ALREADY_EXISTS
//
// MessageText:
//
// A conditional forwarding zone already exists for that name.
//
#define DNS_ERROR_FORWARDER_ALREADY_EXISTS 9619L
//
DNS_ERROR_ZONE_REQUIRES_MASTER_IP
0x00002594
//
// MessageId: DNS_ERROR_ZONE_REQUIRES_MASTER_IP
//
// MessageText:
//
// This zone must be configured with one or more master DNS server IP
addresses.
//
#define DNS_ERROR_ZONE_REQUIRES_MASTER_IP 9620L
//
DNS_ERROR_ZONE_IS_SHUTDOWN
0x00002595
//
// MessageId: DNS_ERROR_ZONE_IS_SHUTDOWN
//
// MessageText:
//
// The operation cannot be performed because this zone is shutdown.
//
#define
DNS_ERROR_ZONE_IS_SHUTDOWN
9621L
//
// Datafile errors
//
#define DNS_ERROR_DATAFILE_BASE 9650
//
DNS
0x000025b3
//
// MessageId: DNS_ERROR_PRIMARY_REQUIRES_DATAFILE
//
// MessageText:
//
// Primary DNS zone requires datafile.
//
#define DNS_ERROR_PRIMARY_REQUIRES_DATAFILE 9651L
//
DNS
0x000025b4
//
// MessageId: DNS_ERROR_INVALID_DATAFILE_NAME
//
// MessageText:
//
// Invalid datafile name for DNS zone.
//
#define DNS_ERROR_INVALID_DATAFILE_NAME 9652L
//
DNS
0x000025b5
//
// MessageId: DNS_ERROR_DATAFILE_OPEN_FAILURE
//
// MessageText:
//
// Failed to open datafile for DNS zone.
//
#define DNS_ERROR_DATAFILE_OPEN_FAILURE 9653L
//
DNS
0x000025b6
//
// MessageId: DNS_ERROR_FILE_WRITEBACK_FAILED
//
// MessageText:
//
// Failed to write datafile for DNS zone.
//
#define DNS_ERROR_FILE_WRITEBACK_FAILED 9654L
//
DNS
0x000025b7
//
// MessageId: DNS_ERROR_DATAFILE_PARSING
//
// MessageText:
//
// Failure while reading datafile for DNS zone.
//
#define
DNS_ERROR_DATAFILE_PARSING
9655L
//
// Database errors
//
#define DNS_ERROR_DATABASE_BASE 9700
//
DNS_ERROR_RECORD_DOES_NOT_EXIST
0x000025e5
//
// MessageId: DNS_ERROR_RECORD_DOES_NOT_EXIST
//
// MessageText:
//
// DNS record does not exist.
//
#define DNS_ERROR_RECORD_DOES_NOT_EXIST 9701L
//
DNS_ERROR_RECORD_FORMAT
0x000025e6
//
// MessageId: DNS_ERROR_RECORD_FORMAT
//
// MessageText:
//
// DNS record format error.
//
#define
DNS_ERROR_RECORD_FORMAT
9702L
//
DNS_ERROR_NODE_CREATION_FAILED
0x000025e7
//
// MessageId: DNS_ERROR_NODE_CREATION_FAILED
//
// MessageText:
//
// Node creation failure in DNS.
//
#define DNS_ERROR_NODE_CREATION_FAILED 9703L
//
DNS_ERROR_UNKNOWN_RECORD_TYPE
0x000025e8
//
// MessageId: DNS_ERROR_UNKNOWN_RECORD_TYPE
//
// MessageText:
//
// Unknown DNS record type.
//
#define DNS_ERROR_UNKNOWN_RECORD_TYPE
9704L
//
DNS_ERROR_RECORD_TIMED_OUT
0x000025e9
//
// MessageId: DNS_ERROR_RECORD_TIMED_OUT
//
// MessageText:
//
// DNS record timed out.
//
#define
DNS_ERROR_RECORD_TIMED_OUT
9705L
//
DNS_ERROR_NAME_NOT_IN_ZONE
0x000025ea
//
// MessageId: DNS_ERROR_NAME_NOT_IN_ZONE
//
// MessageText:
//
// Name not in DNS zone.
//
#define
DNS_ERROR_NAME_NOT_IN_ZONE
9706L
//
DNS_ERROR_CNAME_LOOP
0x000025eb
//
// MessageId: DNS_ERROR_CNAME_LOOP
//
// MessageText:
//
// CNAME loop detected.
//
#define
DNS_ERROR_CNAME_LOOP
9707L
//
DNS_ERROR_NODE_IS_CNAME
0x000025ec
//
// MessageId: DNS_ERROR_NODE_IS_CNAME
//
// MessageText:
//
// Node is a CNAME DNS record.
//
#define
DNS_ERROR_NODE_IS_CNAME
9708L
//
DNS_ERROR_CNAME_COLLISION
0x000025ed
//
// MessageId: DNS_ERROR_CNAME_COLLISION
//
// MessageText:
//
// A CNAME record already exists for given name.
//
#define
DNS_ERROR_CNAME_COLLISION
9709L
//
DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT
0x000025ee
//
// MessageId: DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT
//
// MessageText:
//
// Record only at DNS zone root.
//
#define DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT 9710L
//
DNS_ERROR_RECORD_ALREADY_EXISTS
0x000025ef
//
// MessageId: DNS_ERROR_RECORD_ALREADY_EXISTS
//
// MessageText:
//
// DNS record already exists.
//
#define DNS_ERROR_RECORD_ALREADY_EXISTS 9711L
//
DNS_ERROR_SECONDARY_DATA
0x000025f0
//
// MessageId: DNS_ERROR_SECONDARY_DATA
//
// MessageText:
//
// Secondary DNS zone data error.
//
#define
DNS_ERROR_SECONDARY_DATA
9712L
//
DNS_ERROR_NO_CREATE_CACHE_DATA
0x000025f1
//
// MessageId: DNS_ERROR_NO_CREATE_CACHE_DATA
//
// MessageText:
//
// Could not create DNS cache data.
//
#define DNS_ERROR_NO_CREATE_CACHE_DATA 9713L
//
DNS_ERROR_NAME_DOES_NOT_EXIST
0x000025f2
//
// MessageId: DNS_ERROR_NAME_DOES_NOT_EXIST
//
// MessageText:
//
// DNS name does not exist.
//
#define DNS_ERROR_NAME_DOES_NOT_EXIST
9714L
//
DNS_WARNING_PTR_CREATE_FAILED
0x000025f3
//
// MessageId: DNS_WARNING_PTR_CREATE_FAILED
//
// MessageText:
//
// Could not create pointer (PTR) record.
//
#define DNS_WARNING_PTR_CREATE_FAILED
9715L
//
DNS_WARNING_DOMAIN_UNDELETED
0x000025f4
//
// MessageId: DNS_WARNING_DOMAIN_UNDELETED
//
// MessageText:
//
// DNS domain was undeleted.
//
#define
DNS_WARNING_DOMAIN_UNDELETED
9716L
//
DNS_ERROR_DS_UNAVAILABLE
0x000025f5
//
// MessageId: DNS_ERROR_DS_UNAVAILABLE
//
// MessageText:
//
// The directory service is unavailable.
//
#define
DNS_ERROR_DS_UNAVAILABLE
9717L
//
DNS_ERROR_DS_ZONE_ALREADY_EXISTS
0x000025f6
//
// MessageId: DNS_ERROR_DS_ZONE_ALREADY_EXISTS
//
// MessageText:
//
// DNS zone already exists in the directory service.
//
#define DNS_ERROR_DS_ZONE_ALREADY_EXISTS 9718L
//
DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE
0x000025f7
//
// MessageId: DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE
//
// MessageText:
//
// DNS server not creating or reading the boot file for the directory
service integrated DNS zone.
//
#define DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE 9719L
//
DNS_ERROR_NODE_IS_DNAME
0x000025f8
//
// MessageId: DNS_ERROR_NODE_IS_DNAME
//
// MessageText:
//
// Node is a DNAME DNS record.
//
#define
DNS_ERROR_NODE_IS_DNAME
9720L
//
DNS_ERROR_DNAME_COLLISION
0x000025f9
//
// MessageId: DNS_ERROR_DNAME_COLLISION
//
// MessageText:
//
// A DNAME record already exists for given name.
//
#define
DNS_ERROR_DNAME_COLLISION
9721L
//
DNS_ERROR_ALIAS_LOOP
0x000025fa
//
// MessageId: DNS_ERROR_ALIAS_LOOP
//
// MessageText:
//
// An alias loop has been detected with either CNAME or DNAME records.
//
#define
DNS_ERROR_ALIAS_LOOP
9722L
//
// Operation errors
//
#define DNS_ERROR_OPERATION_BASE 9750
//
DNS_INFO_AXFR_COMPLETE
0x00002617
//
// MessageId: DNS_INFO_AXFR_COMPLETE
//
// MessageText:
//
// DNS AXFR (zone transfer) complete.
//
#define
DNS_INFO_AXFR_COMPLETE
9751L
//
DNS_ERROR_AXFR
0x00002618
//
// MessageId: DNS_ERROR_AXFR
//
// MessageText:
//
// DNS zone transfer failed.
//
#define
DNS_ERROR_AXFR
9752L
//
DNS_INFO_ADDED_LOCAL_WINS
0x00002619
//
// MessageId: DNS_INFO_ADDED_LOCAL_WINS
//
// MessageText:
//
// Added local WINS server.
//
#define
DNS_INFO_ADDED_LOCAL_WINS
9753L
//
// Secure update
//
#define DNS_ERROR_SECURE_BASE 9800
//
DNS_STATUS_CONTINUE_NEEDED
0x00002649
//
// MessageId: DNS_STATUS_CONTINUE_NEEDED
//
// MessageText:
//
// Secure update call needs to continue update request.
//
#define
DNS_STATUS_CONTINUE_NEEDED
9801L
//
// Setup errors
//
#define DNS_ERROR_SETUP_BASE 9850
//
DNS_ERROR_NO_TCPIP
0x0000267b
//
// MessageId: DNS_ERROR_NO_TCPIP
//
// MessageText:
//
// TCP/IP network protocol not installed.
//
#define
DNS_ERROR_NO_TCPIP
9851L
//
DNS_ERROR_NO_DNS_SERVERS
0x0000267c
//
// MessageId: DNS_ERROR_NO_DNS_SERVERS
//
// MessageText:
//
// No DNS servers configured for local system.
//
#define
DNS_ERROR_NO_DNS_SERVERS
9852L
//
// Directory partition (DP) errors
//
#define DNS_ERROR_DP_BASE 9900
//
DNS_ERROR_DP_DOES_NOT_EXIST
0x000026ad
//
// MessageId: DNS_ERROR_DP_DOES_NOT_EXIST
//
// MessageText:
//
// The specified directory partition does not exist.
//
#define
DNS_ERROR_DP_DOES_NOT_EXIST
9901L
//
DNS_ERROR_DP_ALREADY_EXISTS
0x000026ae
//
// MessageId: DNS_ERROR_DP_ALREADY_EXISTS
//
// MessageText:
//
// The specified directory partition already exists.
//
#define
DNS_ERROR_DP_ALREADY_EXISTS
9902L
//
DNS_ERROR_DP_NOT_ENLISTED
0x000026af
//
// MessageId: DNS_ERROR_DP_NOT_ENLISTED
//
// MessageText:
//
// This DNS server is not enlisted in the specified directory partition.
//
#define
DNS_ERROR_DP_NOT_ENLISTED
9903L
//
DNS_ERROR_DP_ALREADY_ENLISTED
0x000026b0
//
// MessageId: DNS_ERROR_DP_ALREADY_ENLISTED
//
// MessageText:
//
// This DNS server is already enlisted in the specified directory
partition.
//
#define DNS_ERROR_DP_ALREADY_ENLISTED
9904L
//
DNS_ERROR_DP_NOT_AVAILABLE
0x000026b1
//
// MessageId: DNS_ERROR_DP_NOT_AVAILABLE
//
// MessageText:
//
// The directory partition is not available at this time. Please wait a
few minutes and try again.
//
#define
DNS_ERROR_DP_NOT_AVAILABLE
9905L
//
DNS_ERROR_DP_FSMO_ERROR
0x000026b2
//
// MessageId: DNS_ERROR_DP_FSMO_ERROR
//
// MessageText:
//
//
The application directory partition operation failed. The domain
controller holding the domain naming master role is down or unable to
service the request or is not running Windows Server 2003.
//
#define
DNS_ERROR_DP_FSMO_ERROR
9906L
///////////////////////////////////////////////////
//
//
//
End of DNS Error
Codes
//
//
//
//
9000 to
9999
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
WinSock Error
Codes
//
//
//
//
10000 to
11999
//
///////////////////////////////////////////////////
//
// WinSock error codes are also defined in WinSock.h
// and WinSock2.h, hence the IFDEF
//
#ifndef WSABASEERR
#define WSABASEERR 10000
//
// MessageId: WSAEINTR
//
// MessageText:
//
// A blocking operation was interrupted by a call to
WSACancelBlockingCall.
//
#define
WSAEINTR
10004L
//
// MessageId: WSAEBADF
//
// MessageText:
//
// The file handle supplied is not valid.
//
#define
WSAEBADF
10009L
//
// MessageId: WSAEACCES
//
// MessageText:
//
// An attempt was made to access a socket in a way forbidden by its
access permissions.
//
#define
WSAEACCES
10013L
//
// MessageId: WSAEFAULT
//
// MessageText:
//
// The system detected an invalid pointer address in attempting to use
a pointer argument in a call.
//
#define
WSAEFAULT
10014L
//
// MessageId: WSAEINVAL
//
// MessageText:
//
// An invalid argument was supplied.
//
#define
WSAEINVAL
10022L
//
// MessageId: WSAEMFILE
//
// MessageText:
//
// Too many open sockets.
//
#define
WSAEMFILE
10024L
//
// MessageId: WSAEWOULDBLOCK
//
// MessageText:
//
// A non-blocking socket operation could not be completed immediately.
//
#define
WSAEWOULDBLOCK
10035L
//
// MessageId: WSAEINPROGRESS
//
// MessageText:
//
// A blocking operation is currently executing.
//
#define
WSAEINPROGRESS
10036L
//
// MessageId: WSAEALREADY
//
// MessageText:
//
// An operation was attempted on a non-blocking socket that already had
an operation in progress.
//
#define
WSAEALREADY
10037L
//
// MessageId: WSAENOTSOCK
//
// MessageText:
//
// An operation was attempted on something that is not a socket.
//
#define
WSAENOTSOCK
10038L
//
// MessageId: WSAEDESTADDRREQ
//
// MessageText:
//
// A required address was omitted from an operation on a socket.
//
#define
WSAEDESTADDRREQ
10039L
//
// MessageId: WSAEMSGSIZE
//
// MessageText:
//
//
A message sent on a datagram socket was larger than the internal
message buffer or some other network limit, or the buffer used to
receive a datagram into was smaller than the datagram itself.
//
#define
WSAEMSGSIZE
10040L
//
// MessageId: WSAEPROTOTYPE
//
// MessageText:
//
// A protocol was specified in the socket function call that does not
support the semantics of the socket type requested.
//
#define
WSAEPROTOTYPE
10041L
//
// MessageId: WSAENOPROTOOPT
//
// MessageText:
//
// An unknown, invalid, or unsupported option or level was specified in
a getsockopt or setsockopt call.
//
#define
WSAENOPROTOOPT
10042L
//
// MessageId: WSAEPROTONOSUPPORT
//
// MessageText:
//
// The requested protocol has not been configured into the system, or
no implementation for it exists.
//
#define
WSAEPROTONOSUPPORT
10043L
//
// MessageId: WSAESOCKTNOSUPPORT
//
// MessageText:
//
// The support for the specified socket type does not exist in this
address family.
//
#define
WSAESOCKTNOSUPPORT
10044L
//
// MessageId: WSAEOPNOTSUPP
//
// MessageText:
//
// The attempted operation is not supported for the type of object
referenced.
//
#define
WSAEOPNOTSUPP
10045L
//
// MessageId: WSAEPFNOSUPPORT
//
// MessageText:
//
// The protocol family has not been configured into the system or no
implementation for it exists.
//
#define
WSAEPFNOSUPPORT
10046L
//
// MessageId: WSAEAFNOSUPPORT
//
// MessageText:
//
// An address incompatible with the requested protocol was used.
//
#define
WSAEAFNOSUPPORT
10047L
//
// MessageId: WSAEADDRINUSE
//
// MessageText:
//
// Only one usage of each socket address (protocol/network
address/port) is normally permitted.
//
#define
WSAEADDRINUSE
10048L
//
// MessageId: WSAEADDRNOTAVAIL
//
// MessageText:
//
// The requested address is not valid in its context.
//
#define
WSAEADDRNOTAVAIL
10049L
//
// MessageId: WSAENETDOWN
//
// MessageText:
//
// A socket operation encountered a dead network.
//
#define
WSAENETDOWN
10050L
//
// MessageId: WSAENETUNREACH
//
// MessageText:
//
// A socket operation was attempted to an unreachable network.
//
#define
WSAENETUNREACH
10051L
//
// MessageId: WSAENETRESET
//
// MessageText:
//
// The connection has been broken due to keep-alive activity detecting
a failure while the operation was in progress.
//
#define
WSAENETRESET
10052L
//
// MessageId: WSAECONNABORTED
//
// MessageText:
//
// An established connection was aborted by the software in your host
machine.
//
#define
WSAECONNABORTED
10053L
//
// MessageId: WSAECONNRESET
//
// MessageText:
//
// An existing connection was forcibly closed by the remote host.
//
#define
WSAECONNRESET
10054L
//
// MessageId: WSAENOBUFS
//
// MessageText:
//
//
An operation on a socket could not be performed because the system
lacked sufficient buffer space or because a queue was full.
//
#define
WSAENOBUFS
10055L
//
// MessageId: WSAEISCONN
//
// MessageText:
//
// A connect request was made on an already connected socket.
//
#define
WSAEISCONN
10056L
//
// MessageId: WSAENOTCONN
//
// MessageText:
//
//
A request to send or receive data was disallowed because the socket is
not connected and (when sending on a datagram socket using a sendto
call) no address was supplied.
//
#define
WSAENOTCONN
10057L
//
// MessageId: WSAESHUTDOWN
//
// MessageText:
//
//
A request to send or receive data was disallowed because the socket had
already been shut down in that direction with a previous shutdown call.
//
#define
WSAESHUTDOWN
10058L
//
// MessageId: WSAETOOMANYREFS
//
// MessageText:
//
// Too many references to some kernel object.
//
#define
WSAETOOMANYREFS
10059L
//
// MessageId: WSAETIMEDOUT
//
// MessageText:
//
//
A connection attempt failed because the connected party did not
properly respond after a period of time, or established connection
failed because connected host has failed to respond.
//
#define
WSAETIMEDOUT
10060L
//
// MessageId: WSAECONNREFUSED
//
// MessageText:
//
// No connection could be made because the target machine actively
refused it.
//
#define
WSAECONNREFUSED
10061L
//
// MessageId: WSAELOOP
//
// MessageText:
//
// Cannot translate name.
//
#define
WSAELOOP
10062L
//
// MessageId: WSAENAMETOOLONG
//
// MessageText:
//
// Name component or name was too long.
//
#define
WSAENAMETOOLONG
10063L
//
// MessageId: WSAEHOSTDOWN
//
// MessageText:
//
// A socket operation failed because the destination host was down.
//
#define
WSAEHOSTDOWN
10064L
//
// MessageId: WSAEHOSTUNREACH
//
// MessageText:
//
// A socket operation was attempted to an unreachable host.
//
#define
WSAEHOSTUNREACH
10065L
//
// MessageId: WSAENOTEMPTY
//
// MessageText:
//
// Cannot remove a directory that is not empty.
//
#define
WSAENOTEMPTY
10066L
//
// MessageId: WSAEPROCLIM
//
// MessageText:
//
// A Windows Sockets implementation may have a limit on the number of
applications that may use it simultaneously.
//
#define
WSAEPROCLIM
10067L
//
// MessageId: WSAEUSERS
//
// MessageText:
//
// Ran out of quota.
//
#define
WSAEUSERS
10068L
//
// MessageId: WSAEDQUOT
//
// MessageText:
//
// Ran out of disk quota.
//
#define
WSAEDQUOT
10069L
//
// MessageId: WSAESTALE
//
// MessageText:
//
// File handle reference is no longer available.
//
#define
WSAESTALE
10070L
//
// MessageId: WSAEREMOTE
//
// MessageText:
//
// Item is not available locally.
//
#define
WSAEREMOTE
10071L
//
// MessageId: WSASYSNOTREADY
//
// MessageText:
//
//
WSAStartup cannot function at this time because the underlying system
it uses to provide network services is currently unavailable.
//
#define
WSASYSNOTREADY
10091L
//
// MessageId: WSAVERNOTSUPPORTED
//
// MessageText:
//
// The Windows Sockets version requested is not supported.
//
#define
WSAVERNOTSUPPORTED
10092L
//
// MessageId: WSANOTINITIALISED
//
// MessageText:
//
// Either the application has not called WSAStartup, or WSAStartup
failed.
//
#define
WSANOTINITIALISED
10093L
//
// MessageId: WSAEDISCON
//
// MessageText:
//
// Returned by WSARecv or WSARecvFrom to indicate the remote party has
initiated a graceful shutdown sequence.
//
#define
WSAEDISCON
10101L
//
// MessageId: WSAENOMORE
//
// MessageText:
//
// No more results can be returned by WSALookupServiceNext.
//
#define
WSAENOMORE
10102L
//
// MessageId: WSAECANCELLED
//
// MessageText:
//
// A call to WSALookupServiceEnd was made while this call was still
processing. The call has been canceled.
//
#define
WSAECANCELLED
10103L
//
// MessageId: WSAEINVALIDPROCTABLE
//
// MessageText:
//
// The procedure call table is invalid.
//
#define
WSAEINVALIDPROCTABLE
10104L
//
// MessageId: WSAEINVALIDPROVIDER
//
// MessageText:
//
// The requested service provider is invalid.
//
#define
WSAEINVALIDPROVIDER
10105L
//
// MessageId: WSAEPROVIDERFAILEDINIT
//
// MessageText:
//
// The requested service provider could not be loaded or initialized.
//
#define
WSAEPROVIDERFAILEDINIT
10106L
//
// MessageId: WSASYSCALLFAILURE
//
// MessageText:
//
// A system call has failed.
//
#define
WSASYSCALLFAILURE
10107L
//
// MessageId: WSASERVICE_NOT_FOUND
//
// MessageText:
//
// No such service is known. The service cannot be found in the
specified name space.
//
#define
WSASERVICE_NOT_FOUND
10108L
//
// MessageId: WSATYPE_NOT_FOUND
//
// MessageText:
//
// The specified class was not found.
//
#define
WSATYPE_NOT_FOUND
10109L
//
// MessageId: WSA_E_NO_MORE
//
// MessageText:
//
// No more results can be returned by WSALookupServiceNext.
//
#define
WSA_E_NO_MORE
10110L
//
// MessageId: WSA_E_CANCELLED
//
// MessageText:
//
// A call to WSALookupServiceEnd was made while this call was still
processing. The call has been canceled.
//
#define
WSA_E_CANCELLED
10111L
//
// MessageId: WSAEREFUSED
//
// MessageText:
//
// A database query failed because it was actively refused.
//
#define
WSAEREFUSED
10112L
//
// MessageId: WSAHOST_NOT_FOUND
//
// MessageText:
//
// No such host is known.
//
#define
WSAHOST_NOT_FOUND
11001L
//
// MessageId: WSATRY_AGAIN
//
// MessageText:
//
//
This is usually a temporary error during hostname resolution and means
that the local server did not receive a response from an authoritative
server.
//
#define
WSATRY_AGAIN
11002L
//
// MessageId: WSANO_RECOVERY
//
// MessageText:
//
// A non-recoverable error occurred during a database lookup.
//
#define
WSANO_RECOVERY
11003L
//
// MessageId: WSANO_DATA
//
// MessageText:
//
// The requested name is valid, but no data of the requested type was
found.
//
#define
WSANO_DATA
11004L
//
// MessageId: WSA_QOS_RECEIVERS
//
// MessageText:
//
// At least one reserve has arrived.
//
#define
WSA_QOS_RECEIVERS
11005L
//
// MessageId: WSA_QOS_SENDERS
//
// MessageText:
//
// At least one path has arrived.
//
#define
WSA_QOS_SENDERS
11006L
//
// MessageId: WSA_QOS_NO_SENDERS
//
// MessageText:
//
// There are no senders.
//
#define
WSA_QOS_NO_SENDERS
11007L
//
// MessageId: WSA_QOS_NO_RECEIVERS
//
// MessageText:
//
// There are no receivers.
//
#define
WSA_QOS_NO_RECEIVERS
11008L
//
// MessageId: WSA_QOS_REQUEST_CONFIRMED
//
// MessageText:
//
// Reserve has been confirmed.
//
#define
WSA_QOS_REQUEST_CONFIRMED
11009L
//
// MessageId: WSA_QOS_ADMISSION_FAILURE
//
// MessageText:
//
// Error due to lack of resources.
//
#define
WSA_QOS_ADMISSION_FAILURE
11010L
//
// MessageId: WSA_QOS_POLICY_FAILURE
//
// MessageText:
//
// Rejected for administrative reasons - bad credentials.
//
#define
WSA_QOS_POLICY_FAILURE
11011L
//
// MessageId: WSA_QOS_BAD_STYLE
//
// MessageText:
//
// Unknown or conflicting style.
//
#define
WSA_QOS_BAD_STYLE
11012L
//
// MessageId: WSA_QOS_BAD_OBJECT
//
// MessageText:
//
// Problem with some part of the filterspec or providerspecific buffer
in general.
//
#define
WSA_QOS_BAD_OBJECT
11013L
//
// MessageId: WSA_QOS_TRAFFIC_CTRL_ERROR
//
// MessageText:
//
// Problem with some part of the flowspec.
//
#define
WSA_QOS_TRAFFIC_CTRL_ERROR
11014L
//
// MessageId: WSA_QOS_GENERIC_ERROR
//
// MessageText:
//
// General QOS error.
//
#define
WSA_QOS_GENERIC_ERROR
11015L
//
// MessageId: WSA_QOS_ESERVICETYPE
//
// MessageText:
//
// An invalid or unrecognized service type was found in the flowspec.
//
#define
WSA_QOS_ESERVICETYPE
11016L
//
// MessageId: WSA_QOS_EFLOWSPEC
//
// MessageText:
//
// An invalid or inconsistent flowspec was found in the QOS structure.
//
#define
WSA_QOS_EFLOWSPEC
11017L
//
// MessageId: WSA_QOS_EPROVSPECBUF
//
// MessageText:
//
// Invalid QOS provider-specific buffer.
//
#define
WSA_QOS_EPROVSPECBUF
11018L
//
// MessageId: WSA_QOS_EFILTERSTYLE
//
// MessageText:
//
// An invalid QOS filter style was used.
//
#define
WSA_QOS_EFILTERSTYLE
11019L
//
// MessageId: WSA_QOS_EFILTERTYPE
//
// MessageText:
//
// An invalid QOS filter type was used.
//
#define
WSA_QOS_EFILTERTYPE
11020L
//
// MessageId: WSA_QOS_EFILTERCOUNT
//
// MessageText:
//
// An incorrect number of QOS FILTERSPECs were specified in the
FLOWDESCRIPTOR.
//
#define
WSA_QOS_EFILTERCOUNT
11021L
//
// MessageId: WSA_QOS_EOBJLENGTH
//
// MessageText:
//
// An object with an invalid ObjectLength field was specified in the
QOS provider-specific buffer.
//
#define
WSA_QOS_EOBJLENGTH
11022L
//
// MessageId: WSA_QOS_EFLOWCOUNT
//
// MessageText:
//
// An incorrect number of flow descriptors was specified in the QOS
structure.
//
#define
WSA_QOS_EFLOWCOUNT
11023L
//
// MessageId: WSA_QOS_EUNKOWNPSOBJ
//
// MessageText:
//
// An unrecognized object was found in the QOS provider-specific buffer.
//
#define
WSA_QOS_EUNKOWNPSOBJ
11024L
//
// MessageId: WSA_QOS_EPOLICYOBJ
//
// MessageText:
//
// An invalid policy object was found in the QOS provider-specific
buffer.
//
#define
WSA_QOS_EPOLICYOBJ
11025L
//
// MessageId: WSA_QOS_EFLOWDESC
//
// MessageText:
//
// An invalid QOS flow descriptor was found in the flow descriptor list.
//
#define
WSA_QOS_EFLOWDESC
11026L
//
// MessageId: WSA_QOS_EPSFLOWSPEC
//
// MessageText:
//
// An invalid or inconsistent flowspec was found in the QOS provider
specific buffer.
//
#define
WSA_QOS_EPSFLOWSPEC
11027L
//
// MessageId: WSA_QOS_EPSFILTERSPEC
//
// MessageText:
//
// An invalid FILTERSPEC was found in the QOS provider-specific buffer.
//
#define
WSA_QOS_EPSFILTERSPEC
11028L
//
// MessageId: WSA_QOS_ESDMODEOBJ
//
// MessageText:
//
// An invalid shape discard mode object was found in the QOS provider
specific buffer.
//
#define
WSA_QOS_ESDMODEOBJ
11029L
//
// MessageId: WSA_QOS_ESHAPERATEOBJ
//
// MessageText:
//
// An invalid shaping rate object was found in the QOS
provider-specific buffer.
//
#define
WSA_QOS_ESHAPERATEOBJ
11030L
//
// MessageId: WSA_QOS_RESERVED_PETYPE
//
// MessageText:
//
// A reserved policy element was found in the QOS provider-specific
buffer.
//
#define
WSA_QOS_RESERVED_PETYPE
11031L
//
// MessageId: WSA_SECURE_HOST_NOT_FOUND
//
// MessageText:
//
// No such host is known securely.
//
#define
WSA_SECURE_HOST_NOT_FOUND
11032L
//
// MessageId: WSA_IPSEC_NAME_POLICY_ERROR
//
// MessageText:
//
// Name based IPSEC policy could not be added.
//
#define
WSA_IPSEC_NAME_POLICY_ERROR
11033L
#endif // defined(WSABASEERR)
///////////////////////////////////////////////////
//
//
//
End of WinSock Error
Codes
//
//
//
//
10000 to
11999
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
Available
//
//
//
//
12000 to
12999
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
Start of IPSec Error
codes
//
//
//
//
13000 to
13999
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_IPSEC_QM_POLICY_EXISTS
//
// MessageText:
//
// The specified quick mode policy already exists.
//
#define
ERROR_IPSEC_QM_POLICY_EXISTS
13000L
//
// MessageId: ERROR_IPSEC_QM_POLICY_NOT_FOUND
//
// MessageText:
//
// The specified quick mode policy was not found.
//
#define ERROR_IPSEC_QM_POLICY_NOT_FOUND 13001L
//
// MessageId: ERROR_IPSEC_QM_POLICY_IN_USE
//
// MessageText:
//
// The specified quick mode policy is being used.
//
#define
ERROR_IPSEC_QM_POLICY_IN_USE
13002L
//
// MessageId: ERROR_IPSEC_MM_POLICY_EXISTS
//
// MessageText:
//
// The specified main mode policy already exists.
//
#define
ERROR_IPSEC_MM_POLICY_EXISTS
13003L
//
// MessageId: ERROR_IPSEC_MM_POLICY_NOT_FOUND
//
// MessageText:
//
// The specified main mode policy was not found
//
#define ERROR_IPSEC_MM_POLICY_NOT_FOUND 13004L
//
// MessageId: ERROR_IPSEC_MM_POLICY_IN_USE
//
// MessageText:
//
// The specified main mode policy is being used.
//
#define
ERROR_IPSEC_MM_POLICY_IN_USE
13005L
//
// MessageId: ERROR_IPSEC_MM_FILTER_EXISTS
//
// MessageText:
//
// The specified main mode filter already exists.
//
#define
ERROR_IPSEC_MM_FILTER_EXISTS
13006L
//
// MessageId: ERROR_IPSEC_MM_FILTER_NOT_FOUND
//
// MessageText:
//
// The specified main mode filter was not found.
//
#define ERROR_IPSEC_MM_FILTER_NOT_FOUND 13007L
//
// MessageId: ERROR_IPSEC_TRANSPORT_FILTER_EXISTS
//
// MessageText:
//
// The specified transport mode filter already exists.
//
#define ERROR_IPSEC_TRANSPORT_FILTER_EXISTS 13008L
//
// MessageId: ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND
//
// MessageText:
//
// The specified transport mode filter does not exist.
//
#define ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND 13009L
//
// MessageId: ERROR_IPSEC_MM_AUTH_EXISTS
//
// MessageText:
//
// The specified main mode authentication list exists.
//
#define
ERROR_IPSEC_MM_AUTH_EXISTS
13010L
//
// MessageId: ERROR_IPSEC_MM_AUTH_NOT_FOUND
//
// MessageText:
//
// The specified main mode authentication list was not found.
//
#define ERROR_IPSEC_MM_AUTH_NOT_FOUND
13011L
//
// MessageId: ERROR_IPSEC_MM_AUTH_IN_USE
//
// MessageText:
//
// The specified main mode authentication list is being used.
//
#define
ERROR_IPSEC_MM_AUTH_IN_USE
13012L
//
// MessageId: ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND
//
// MessageText:
//
// The specified default main mode policy was not found.
//
#define ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND 13013L
//
// MessageId: ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND
//
// MessageText:
//
// The specified default main mode authentication list was not found.
//
#define ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND 13014L
//
// MessageId: ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND
//
// MessageText:
//
// The specified default quick mode policy was not found.
//
#define ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND 13015L
//
// MessageId: ERROR_IPSEC_TUNNEL_FILTER_EXISTS
//
// MessageText:
//
// The specified tunnel mode filter exists.
//
#define ERROR_IPSEC_TUNNEL_FILTER_EXISTS 13016L
//
// MessageId: ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND
//
// MessageText:
//
// The specified tunnel mode filter was not found.
//
#define ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND 13017L
//
// MessageId: ERROR_IPSEC_MM_FILTER_PENDING_DELETION
//
// MessageText:
//
// The Main Mode filter is pending deletion.
//
#define ERROR_IPSEC_MM_FILTER_PENDING_DELETION 13018L
//
// MessageId: ERROR_IPSEC_TRANSPORT_FILTER_PENDING_DELETION
//
// MessageText:
//
// The transport filter is pending deletion.
//
#define ERROR_IPSEC_TRANSPORT_FILTER_PENDING_DELETION 13019L
//
// MessageId: ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION
//
// MessageText:
//
// The tunnel filter is pending deletion.
//
#define ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION 13020L
//
// MessageId: ERROR_IPSEC_MM_POLICY_PENDING_DELETION
//
// MessageText:
//
// The Main Mode policy is pending deletion.
//
#define ERROR_IPSEC_MM_POLICY_PENDING_DELETION 13021L
//
// MessageId: ERROR_IPSEC_MM_AUTH_PENDING_DELETION
//
// MessageText:
//
// The Main Mode authentication bundle is pending deletion.
//
#define ERROR_IPSEC_MM_AUTH_PENDING_DELETION 13022L
//
// MessageId: ERROR_IPSEC_QM_POLICY_PENDING_DELETION
//
// MessageText:
//
// The Quick Mode policy is pending deletion.
//
#define ERROR_IPSEC_QM_POLICY_PENDING_DELETION 13023L
//
// MessageId: WARNING_IPSEC_MM_POLICY_PRUNED
//
// MessageText:
//
// The Main Mode policy was successfully added, but some of the
requested offers are not supported.
//
#define WARNING_IPSEC_MM_POLICY_PRUNED 13024L
//
// MessageId: WARNING_IPSEC_QM_POLICY_PRUNED
//
// MessageText:
//
// The Quick Mode policy was successfully added, but some of the
requested offers are not supported.
//
#define WARNING_IPSEC_QM_POLICY_PRUNED 13025L
//
// MessageId: ERROR_IPSEC_IKE_NEG_STATUS_BEGIN
//
// MessageText:
//
// ERROR_IPSEC_IKE_NEG_STATUS_BEGIN
//
#define ERROR_IPSEC_IKE_NEG_STATUS_BEGIN 13800L
//
// MessageId: ERROR_IPSEC_IKE_AUTH_FAIL
//
// MessageText:
//
// IKE authentication credentials are unacceptable
//
#define
ERROR_IPSEC_IKE_AUTH_FAIL
13801L
//
// MessageId: ERROR_IPSEC_IKE_ATTRIB_FAIL
//
// MessageText:
//
// IKE security attributes are unacceptable
//
#define
ERROR_IPSEC_IKE_ATTRIB_FAIL
13802L
//
// MessageId: ERROR_IPSEC_IKE_NEGOTIATION_PENDING
//
// MessageText:
//
// IKE Negotiation in progress
//
#define ERROR_IPSEC_IKE_NEGOTIATION_PENDING 13803L
//
// MessageId: ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR
//
// MessageText:
//
// General processing error
//
#define ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR 13804L
//
// MessageId: ERROR_IPSEC_IKE_TIMED_OUT
//
// MessageText:
//
// Negotiation timed out
//
#define
ERROR_IPSEC_IKE_TIMED_OUT
13805L
//
// MessageId: ERROR_IPSEC_IKE_NO_CERT
//
// MessageText:
//
//
IKE failed to find valid machine certificate. Contact your Network
Security Administrator about installing a valid certificate in the
appropriate Certificate Store.
//
#define
ERROR_IPSEC_IKE_NO_CERT
13806L
//
// MessageId: ERROR_IPSEC_IKE_SA_DELETED
//
// MessageText:
//
// IKE SA deleted by peer before establishment completed
//
#define
ERROR_IPSEC_IKE_SA_DELETED
13807L
//
// MessageId: ERROR_IPSEC_IKE_SA_REAPED
//
// MessageText:
//
// IKE SA deleted before establishment completed
//
#define
ERROR_IPSEC_IKE_SA_REAPED
13808L
//
// MessageId: ERROR_IPSEC_IKE_MM_ACQUIRE_DROP
//
// MessageText:
//
// Negotiation request sat in Queue too long
//
#define ERROR_IPSEC_IKE_MM_ACQUIRE_DROP 13809L
//
// MessageId: ERROR_IPSEC_IKE_QM_ACQUIRE_DROP
//
// MessageText:
//
// Negotiation request sat in Queue too long
//
#define ERROR_IPSEC_IKE_QM_ACQUIRE_DROP 13810L
//
// MessageId: ERROR_IPSEC_IKE_QUEUE_DROP_MM
//
// MessageText:
//
// Negotiation request sat in Queue too long
//
#define ERROR_IPSEC_IKE_QUEUE_DROP_MM
13811L
//
// MessageId: ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM
//
// MessageText:
//
// Negotiation request sat in Queue too long
//
#define ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM 13812L
//
// MessageId: ERROR_IPSEC_IKE_DROP_NO_RESPONSE
//
// MessageText:
//
// No response from peer
//
#define ERROR_IPSEC_IKE_DROP_NO_RESPONSE 13813L
//
// MessageId: ERROR_IPSEC_IKE_MM_DELAY_DROP
//
// MessageText:
//
// Negotiation took too long
//
#define ERROR_IPSEC_IKE_MM_DELAY_DROP
13814L
//
// MessageId: ERROR_IPSEC_IKE_QM_DELAY_DROP
//
// MessageText:
//
// Negotiation took too long
//
#define ERROR_IPSEC_IKE_QM_DELAY_DROP
13815L
//
// MessageId: ERROR_IPSEC_IKE_ERROR
//
// MessageText:
//
// Unknown error occurred
//
#define
ERROR_IPSEC_IKE_ERROR
13816L
//
// MessageId: ERROR_IPSEC_IKE_CRL_FAILED
//
// MessageText:
//
// Certificate Revocation Check failed
//
#define
ERROR_IPSEC_IKE_CRL_FAILED
13817L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_KEY_USAGE
//
// MessageText:
//
// Invalid certificate key usage
//
#define ERROR_IPSEC_IKE_INVALID_KEY_USAGE 13818L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_CERT_TYPE
//
// MessageText:
//
// Invalid certificate type
//
#define ERROR_IPSEC_IKE_INVALID_CERT_TYPE 13819L
//
// MessageId: ERROR_IPSEC_IKE_NO_PRIVATE_KEY
//
// MessageText:
//
//
IKE negotiation failed because the machine certificate used does not
have a private key. IPsec certificates require a private key. Contact
your Network Security administrator about replacing with a certificate
that has a private key.
//
#define ERROR_IPSEC_IKE_NO_PRIVATE_KEY 13820L
//
// MessageId: ERROR_IPSEC_IKE_SIMULTANEOUS_REKEY
//
// MessageText:
//
// Simultaneous rekeys were detected.
//
#define ERROR_IPSEC_IKE_SIMULTANEOUS_REKEY 13821L
//
// MessageId: ERROR_IPSEC_IKE_DH_FAIL
//
// MessageText:
//
// Failure in Diffie-Hellman computation
//
#define
ERROR_IPSEC_IKE_DH_FAIL
13822L
//
// MessageId: ERROR_IPSEC_IKE_CRITICAL_PAYLOAD_NOT_RECOGNIZED
//
// MessageText:
//
// Don't know how to process critical payload
//
#define ERROR_IPSEC_IKE_CRITICAL_PAYLOAD_NOT_RECOGNIZED 13823L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_HEADER
//
// MessageText:
//
// Invalid header
//
#define ERROR_IPSEC_IKE_INVALID_HEADER 13824L
//
// MessageId: ERROR_IPSEC_IKE_NO_POLICY
//
// MessageText:
//
// No policy configured
//
#define
ERROR_IPSEC_IKE_NO_POLICY
13825L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_SIGNATURE
//
// MessageText:
//
// Failed to verify signature
//
#define ERROR_IPSEC_IKE_INVALID_SIGNATURE 13826L
//
// MessageId: ERROR_IPSEC_IKE_KERBEROS_ERROR
//
// MessageText:
//
// Failed to authenticate using Kerberos
//
#define ERROR_IPSEC_IKE_KERBEROS_ERROR 13827L
//
// MessageId: ERROR_IPSEC_IKE_NO_PUBLIC_KEY
//
// MessageText:
//
// Peer's certificate did not have a public key
//
#define ERROR_IPSEC_IKE_NO_PUBLIC_KEY
13828L
//
These must stay as a unit.
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR
//
// MessageText:
//
// Error processing error payload
//
#define
ERROR_IPSEC_IKE_PROCESS_ERR
13829L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_SA
//
// MessageText:
//
// Error processing SA payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_SA 13830L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_PROP
//
// MessageText:
//
// Error processing Proposal payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_PROP 13831L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_TRANS
//
// MessageText:
//
// Error processing Transform payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_TRANS 13832L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_KE
//
// MessageText:
//
// Error processing KE payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_KE 13833L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_ID
//
// MessageText:
//
// Error processing ID payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_ID 13834L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_CERT
//
// MessageText:
//
// Error processing Cert payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_CERT 13835L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ
//
// MessageText:
//
// Error processing Certificate Request payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ 13836L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_HASH
//
// MessageText:
//
// Error processing Hash payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_HASH 13837L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_SIG
//
// MessageText:
//
// Error processing Signature payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_SIG 13838L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_NONCE
//
// MessageText:
//
// Error processing Nonce payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_NONCE 13839L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY
//
// MessageText:
//
// Error processing Notify payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY 13840L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_DELETE
//
// MessageText:
//
// Error processing Delete Payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_DELETE 13841L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR
//
// MessageText:
//
// Error processing VendorId payload
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR 13842L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_PAYLOAD
//
// MessageText:
//
// Invalid payload received
//
#define ERROR_IPSEC_IKE_INVALID_PAYLOAD 13843L
//
// MessageId: ERROR_IPSEC_IKE_LOAD_SOFT_SA
//
// MessageText:
//
// Soft SA loaded
//
#define
ERROR_IPSEC_IKE_LOAD_SOFT_SA
13844L
//
// MessageId: ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN
//
// MessageText:
//
// Soft SA torn down
//
#define ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN 13845L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_COOKIE
//
// MessageText:
//
// Invalid cookie received.
//
#define ERROR_IPSEC_IKE_INVALID_COOKIE 13846L
//
// MessageId: ERROR_IPSEC_IKE_NO_PEER_CERT
//
// MessageText:
//
// Peer failed to send valid machine certificate
//
#define
ERROR_IPSEC_IKE_NO_PEER_CERT
13847L
//
// MessageId: ERROR_IPSEC_IKE_PEER_CRL_FAILED
//
// MessageText:
//
// Certification Revocation check of peer's certificate failed
//
#define ERROR_IPSEC_IKE_PEER_CRL_FAILED 13848L
//
// MessageId: ERROR_IPSEC_IKE_POLICY_CHANGE
//
// MessageText:
//
// New policy invalidated SAs formed with old policy
//
#define ERROR_IPSEC_IKE_POLICY_CHANGE
13849L
//
// MessageId: ERROR_IPSEC_IKE_NO_MM_POLICY
//
// MessageText:
//
// There is no available Main Mode IKE policy.
//
#define
ERROR_IPSEC_IKE_NO_MM_POLICY
13850L
//
// MessageId: ERROR_IPSEC_IKE_NOTCBPRIV
//
// MessageText:
//
// Failed to enabled TCB privilege.
//
#define
ERROR_IPSEC_IKE_NOTCBPRIV
13851L
//
// MessageId: ERROR_IPSEC_IKE_SECLOADFAIL
//
// MessageText:
//
// Failed to load SECURITY.DLL.
//
#define
ERROR_IPSEC_IKE_SECLOADFAIL
13852L
//
// MessageId: ERROR_IPSEC_IKE_FAILSSPINIT
//
// MessageText:
//
// Failed to obtain security function table dispatch address from SSPI.
//
#define
ERROR_IPSEC_IKE_FAILSSPINIT
13853L
//
// MessageId: ERROR_IPSEC_IKE_FAILQUERYSSP
//
// MessageText:
//
// Failed to query Kerberos package to obtain max token size.
//
#define
ERROR_IPSEC_IKE_FAILQUERYSSP
13854L
//
// MessageId: ERROR_IPSEC_IKE_SRVACQFAIL
//
// MessageText:
//
//
Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE
service. Kerberos authentication will not function. The most likely
reason for this is lack of domain membership. This is normal if your
computer is a member of a workgroup.
//
#define
ERROR_IPSEC_IKE_SRVACQFAIL
13855L
//
// MessageId: ERROR_IPSEC_IKE_SRVQUERYCRED
//
// MessageText:
//
// Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE
service (QueryCredentialsAttributes).
//
#define
ERROR_IPSEC_IKE_SRVQUERYCRED
13856L
//
// MessageId: ERROR_IPSEC_IKE_GETSPIFAIL
//
// MessageText:
//
//
Failed to obtain new SPI for the inbound SA from Ipsec driver. The most
common cause for this is that the driver does not have the correct
filter. Check your policy to verify the filters.
//
#define
ERROR_IPSEC_IKE_GETSPIFAIL
13857L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_FILTER
//
// MessageText:
//
// Given filter is invalid
//
#define ERROR_IPSEC_IKE_INVALID_FILTER 13858L
//
// MessageId: ERROR_IPSEC_IKE_OUT_OF_MEMORY
//
// MessageText:
//
// Memory allocation failed.
//
#define ERROR_IPSEC_IKE_OUT_OF_MEMORY
13859L
//
// MessageId: ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED
//
// MessageText:
//
//
Failed to add Security Association to IPSec Driver. The most common
cause for this is if the IKE negotiation took too long to complete. If
the problem persists, reduce the load on the faulting machine.
//
#define ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED 13860L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_POLICY
//
// MessageText:
//
// Invalid policy
//
#define ERROR_IPSEC_IKE_INVALID_POLICY 13861L
//
// MessageId: ERROR_IPSEC_IKE_UNKNOWN_DOI
//
// MessageText:
//
// Invalid DOI
//
#define
ERROR_IPSEC_IKE_UNKNOWN_DOI
13862L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_SITUATION
//
// MessageText:
//
// Invalid situation
//
#define ERROR_IPSEC_IKE_INVALID_SITUATION 13863L
//
// MessageId: ERROR_IPSEC_IKE_DH_FAILURE
//
// MessageText:
//
// Diffie-Hellman failure
//
#define
ERROR_IPSEC_IKE_DH_FAILURE
13864L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_GROUP
//
// MessageText:
//
// Invalid Diffie-Hellman group
//
#define ERROR_IPSEC_IKE_INVALID_GROUP
13865L
//
// MessageId: ERROR_IPSEC_IKE_ENCRYPT
//
// MessageText:
//
// Error encrypting payload
//
#define
ERROR_IPSEC_IKE_ENCRYPT
13866L
//
// MessageId: ERROR_IPSEC_IKE_DECRYPT
//
// MessageText:
//
// Error decrypting payload
//
#define
ERROR_IPSEC_IKE_DECRYPT
13867L
//
// MessageId: ERROR_IPSEC_IKE_POLICY_MATCH
//
// MessageText:
//
// Policy match error
//
#define
ERROR_IPSEC_IKE_POLICY_MATCH
13868L
//
// MessageId: ERROR_IPSEC_IKE_UNSUPPORTED_ID
//
// MessageText:
//
// Unsupported ID
//
#define ERROR_IPSEC_IKE_UNSUPPORTED_ID 13869L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_HASH
//
// MessageText:
//
// Hash verification failed
//
#define
ERROR_IPSEC_IKE_INVALID_HASH
13870L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_HASH_ALG
//
// MessageText:
//
// Invalid hash algorithm
//
#define ERROR_IPSEC_IKE_INVALID_HASH_ALG 13871L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_HASH_SIZE
//
// MessageText:
//
// Invalid hash size
//
#define ERROR_IPSEC_IKE_INVALID_HASH_SIZE 13872L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG
//
// MessageText:
//
// Invalid encryption algorithm
//
#define ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG 13873L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_AUTH_ALG
//
// MessageText:
//
// Invalid authentication algorithm
//
#define ERROR_IPSEC_IKE_INVALID_AUTH_ALG 13874L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_SIG
//
// MessageText:
//
// Invalid certificate signature
//
#define
ERROR_IPSEC_IKE_INVALID_SIG
13875L
//
// MessageId: ERROR_IPSEC_IKE_LOAD_FAILED
//
// MessageText:
//
// Load failed
//
#define
ERROR_IPSEC_IKE_LOAD_FAILED
13876L
//
// MessageId: ERROR_IPSEC_IKE_RPC_DELETE
//
// MessageText:
//
// Deleted via RPC call
//
#define
ERROR_IPSEC_IKE_RPC_DELETE
13877L
//
// MessageId: ERROR_IPSEC_IKE_BENIGN_REINIT
//
// MessageText:
//
// Temporary state created to perform reinit. This is not a real
failure.
//
#define ERROR_IPSEC_IKE_BENIGN_REINIT
13878L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY
//
// MessageText:
//
//
The lifetime value received in the Responder Lifetime Notify is below
the Windows 2000 configured minimum value. Please fix the policy on the
peer machine.
//
#define ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY 13879L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_MAJOR_VERSION
//
// MessageText:
//
// The recipient cannot handle version of IKE specified in the header.
//
#define ERROR_IPSEC_IKE_INVALID_MAJOR_VERSION 13880L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN
//
// MessageText:
//
// Key length in certificate is too small for configured security
requirements.
//
#define ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN 13881L
//
// MessageId: ERROR_IPSEC_IKE_MM_LIMIT
//
// MessageText:
//
// Max number of established MM SAs to peer exceeded.
//
#define
ERROR_IPSEC_IKE_MM_LIMIT
13882L
//
// MessageId: ERROR_IPSEC_IKE_NEGOTIATION_DISABLED
//
// MessageText:
//
// IKE received a policy that disables negotiation.
//
#define ERROR_IPSEC_IKE_NEGOTIATION_DISABLED 13883L
//
// MessageId: ERROR_IPSEC_IKE_QM_LIMIT
//
// MessageText:
//
// Reached maximum quick mode limit for the main mode. New main mode
will be started.
//
#define
ERROR_IPSEC_IKE_QM_LIMIT
13884L
//
// MessageId: ERROR_IPSEC_IKE_MM_EXPIRED
//
// MessageText:
//
// Main mode SA lifetime expired or peer sent a main mode delete.
//
#define
ERROR_IPSEC_IKE_MM_EXPIRED
13885L
//
// MessageId: ERROR_IPSEC_IKE_PEER_MM_ASSUMED_INVALID
//
// MessageText:
//
// Main mode SA assumed to be invalid because peer stopped responding.
//
#define ERROR_IPSEC_IKE_PEER_MM_ASSUMED_INVALID 13886L
//
// MessageId: ERROR_IPSEC_IKE_CERT_CHAIN_POLICY_MISMATCH
//
// MessageText:
//
// Certificate doesn't chain to a trusted root in IPsec policy.
//
#define ERROR_IPSEC_IKE_CERT_CHAIN_POLICY_MISMATCH 13887L
//
// MessageId: ERROR_IPSEC_IKE_UNEXPECTED_MESSAGE_ID
//
// MessageText:
//
// Received unexpected message ID.
//
#define ERROR_IPSEC_IKE_UNEXPECTED_MESSAGE_ID 13888L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_AUTH_PAYLOAD
//
// MessageText:
//
// Received invalid authentication offers.
//
#define ERROR_IPSEC_IKE_INVALID_AUTH_PAYLOAD 13889L
//
// MessageId: ERROR_IPSEC_IKE_DOS_COOKIE_SENT
//
// MessageText:
//
// Sent DoS cookie notify to initiator.
//
#define ERROR_IPSEC_IKE_DOS_COOKIE_SENT 13890L
//
// MessageId: ERROR_IPSEC_IKE_SHUTTING_DOWN
//
// MessageText:
//
// IKE service is shutting down.
//
#define ERROR_IPSEC_IKE_SHUTTING_DOWN
13891L
//
// MessageId: ERROR_IPSEC_IKE_CGA_AUTH_FAILED
//
// MessageText:
//
// Could not verify binding between CGA address and certificate.
//
#define ERROR_IPSEC_IKE_CGA_AUTH_FAILED 13892L
//
// MessageId: ERROR_IPSEC_IKE_PROCESS_ERR_NATOA
//
// MessageText:
//
// Error processing NatOA payload.
//
#define ERROR_IPSEC_IKE_PROCESS_ERR_NATOA 13893L
//
// MessageId: ERROR_IPSEC_IKE_INVALID_MM_FOR_QM
//
// MessageText:
//
// Parameters of the main mode are invalid for this quick mode.
//
#define ERROR_IPSEC_IKE_INVALID_MM_FOR_QM 13894L
//
// MessageId: ERROR_IPSEC_IKE_QM_EXPIRED
//
// MessageText:
//
// Quick mode SA was expired by IPsec driver.
//
#define
ERROR_IPSEC_IKE_QM_EXPIRED
13895L
//
// MessageId: ERROR_IPSEC_IKE_TOO_MANY_FILTERS
//
// MessageText:
//
// Too many dynamically added IKEEXT filters were detected.
//
#define ERROR_IPSEC_IKE_TOO_MANY_FILTERS 13896L
//
Do NOT change this final value. It is used in a public API
structure
//
// MessageId: ERROR_IPSEC_IKE_NEG_STATUS_END
//
// MessageText:
//
// ERROR_IPSEC_IKE_NEG_STATUS_END
//
#define ERROR_IPSEC_IKE_NEG_STATUS_END 13897L
//
// MessageId: ERROR_IPSEC_IKE_KILL_DUMMY_NAP_TUNNEL
//
// MessageText:
//
// NAP reauth succeeded and must delete the dummy NAP IkeV2 tunnel.
//
#define ERROR_IPSEC_IKE_KILL_DUMMY_NAP_TUNNEL 13898L
//
// MessageId: ERROR_IPSEC_IKE_INNER_IP_ASSIGNMENT_FAILURE
//
// MessageText:
//
// Error in assigning inner IP address to intiator in tunnel mode.
//
#define ERROR_IPSEC_IKE_INNER_IP_ASSIGNMENT_FAILURE 13899L
//
// MessageId: ERROR_IPSEC_IKE_REQUIRE_CP_PAYLOAD_MISSING
//
// MessageText:
//
// Require configuration payload missing.
//
#define ERROR_IPSEC_IKE_REQUIRE_CP_PAYLOAD_MISSING 13900L
//
// MessageId: ERROR_IPSEC_KEY_MODULE_IMPERSONATION_NEGOTIATION_PENDING
//
// MessageText:
//
// A negotiation running as the security principle who issued the
connection is in progress
//
#define ERROR_IPSEC_KEY_MODULE_IMPERSONATION_NEGOTIATION_PENDING 13901L
//
// MessageId: ERROR_IPSEC_IKE_COEXISTENCE_SUPPRESS
//
// MessageText:
//
// SA was deleted due to IKEv1/AuthIP co-existence suppress check.
//
#define ERROR_IPSEC_IKE_COEXISTENCE_SUPPRESS 13902L
//
// MessageId: ERROR_IPSEC_IKE_RATELIMIT_DROP
//
// MessageText:
//
// Incoming SA request was dropped due to peer IP address rate limiting.
//
#define ERROR_IPSEC_IKE_RATELIMIT_DROP 13903L
//
// MessageId: ERROR_IPSEC_IKE_PEER_DOESNT_SUPPORT_MOBIKE
//
// MessageText:
//
// Peer does not support MOBIKE.
//
#define ERROR_IPSEC_IKE_PEER_DOESNT_SUPPORT_MOBIKE 13904L
//
// MessageId: ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE
//
// MessageText:
//
// SA establishment is not authorized.
//
#define ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE 13905L
//
// MessageId: ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_FAILURE
//
// MessageText:
//
// SA establishment is not authorized because there is not a
sufficiently strong PKINIT-based credential.
//
#define ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_FAILURE 13906L
//
// MessageId: ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE_WITH_OPTIONAL_RETRY
//
// MessageText:
//
// SA establishment is not authorized. You may need to enter
updated or different credentials such as a smartcard.
//
#define ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE_WITH_OPTIONAL_RETRY 13907L
//
// MessageId:
ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_AND_CERTMAP_FAILURE
//
// MessageText:
//
//
SA establishment is not authorized because there is not a sufficiently
strong PKINIT-based credential. This might be related to
certificate-to-account mapping failure for the SA.
//
#define ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_AND_CERTMAP_FAILURE
13908L
//
Extended upper bound for IKE errors to accomodate new errors
//
// MessageId: ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END
//
// MessageText:
//
// ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END
//
#define ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END 13909L
//
// Following error codes are returned by IPsec kernel.
//
//
// MessageId: ERROR_IPSEC_BAD_SPI
//
// MessageText:
//
// The SPI in the packet does not match a valid IPsec SA.
//
#define
ERROR_IPSEC_BAD_SPI
13910L
//
// MessageId: ERROR_IPSEC_SA_LIFETIME_EXPIRED
//
// MessageText:
//
// Packet was received on an IPsec SA whose lifetime has expired.
//
#define ERROR_IPSEC_SA_LIFETIME_EXPIRED 13911L
//
// MessageId: ERROR_IPSEC_WRONG_SA
//
// MessageText:
//
// Packet was received on an IPsec SA that does not match the packet
characteristics.
//
#define
ERROR_IPSEC_WRONG_SA
13912L
//
// MessageId: ERROR_IPSEC_REPLAY_CHECK_FAILED
//
// MessageText:
//
// Packet sequence number replay check failed.
//
#define ERROR_IPSEC_REPLAY_CHECK_FAILED 13913L
//
// MessageId: ERROR_IPSEC_INVALID_PACKET
//
// MessageText:
//
// IPsec header and/or trailer in the packet is invalid.
//
#define
ERROR_IPSEC_INVALID_PACKET
13914L
//
// MessageId: ERROR_IPSEC_INTEGRITY_CHECK_FAILED
//
// MessageText:
//
// IPsec integrity check failed.
//
#define ERROR_IPSEC_INTEGRITY_CHECK_FAILED 13915L
//
// MessageId: ERROR_IPSEC_CLEAR_TEXT_DROP
//
// MessageText:
//
// IPsec dropped a clear text packet.
//
#define
ERROR_IPSEC_CLEAR_TEXT_DROP
13916L
//
// MessageId: ERROR_IPSEC_AUTH_FIREWALL_DROP
//
// MessageText:
//
// IPsec dropped an incoming ESP packet in authenticated firewall mode.
This drop is benign.
//
#define ERROR_IPSEC_AUTH_FIREWALL_DROP 13917L
//
// MessageId: ERROR_IPSEC_THROTTLE_DROP
//
// MessageText:
//
// IPsec dropped a packet due to DoS throttling.
//
#define
ERROR_IPSEC_THROTTLE_DROP
13918L
//
// MessageId: ERROR_IPSEC_DOSP_BLOCK
//
// MessageText:
//
// IPsec DoS Protection matched an explicit block rule.
//
#define
ERROR_IPSEC_DOSP_BLOCK
13925L
//
// MessageId: ERROR_IPSEC_DOSP_RECEIVED_MULTICAST
//
// MessageText:
//
// IPsec DoS Protection received an IPsec specific multicast packet
which is not allowed.
//
#define ERROR_IPSEC_DOSP_RECEIVED_MULTICAST 13926L
//
// MessageId: ERROR_IPSEC_DOSP_INVALID_PACKET
//
// MessageText:
//
// IPsec DoS Protection received an incorrectly formatted packet.
//
#define ERROR_IPSEC_DOSP_INVALID_PACKET 13927L
//
// MessageId: ERROR_IPSEC_DOSP_STATE_LOOKUP_FAILED
//
// MessageText:
//
// IPsec DoS Protection failed to look up state.
//
#define ERROR_IPSEC_DOSP_STATE_LOOKUP_FAILED 13928L
//
// MessageId: ERROR_IPSEC_DOSP_MAX_ENTRIES
//
// MessageText:
//
// IPsec DoS Protection failed to create state because the maximum
number of entries allowed by policy has been reached.
//
#define
ERROR_IPSEC_DOSP_MAX_ENTRIES
13929L
//
// MessageId: ERROR_IPSEC_DOSP_KEYMOD_NOT_ALLOWED
//
// MessageText:
//
// IPsec DoS Protection received an IPsec negotiation packet for a
keying module which is not allowed by policy.
//
#define ERROR_IPSEC_DOSP_KEYMOD_NOT_ALLOWED 13930L
//
// MessageId: ERROR_IPSEC_DOSP_NOT_INSTALLED
//
// MessageText:
//
// IPsec DoS Protection has not been enabled.
//
#define ERROR_IPSEC_DOSP_NOT_INSTALLED 13931L
//
// MessageId: ERROR_IPSEC_DOSP_MAX_PER_IP_RATELIMIT_QUEUES
//
// MessageText:
//
//
IPsec DoS Protection failed to create a per internal IP rate limit
queue because the maximum number of queues allowed by policy has been
reached.
//
#define ERROR_IPSEC_DOSP_MAX_PER_IP_RATELIMIT_QUEUES 13932L
///////////////////////////////////////////////////
//
//
//
End of IPSec Error
codes
//
//
//
//
13000 to
13999
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
Start of Side By Side Error
Codes //
//
//
//
14000 to
14999
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_SXS_SECTION_NOT_FOUND
//
// MessageText:
//
// The requested section was not present in the activation context.
//
#define
ERROR_SXS_SECTION_NOT_FOUND
14000L
//
// MessageId: ERROR_SXS_CANT_GEN_ACTCTX
//
// MessageText:
//
//
The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log or use
the command-line sxstrace.exe tool for more detail.
//
#define
ERROR_SXS_CANT_GEN_ACTCTX
14001L
//
// MessageId: ERROR_SXS_INVALID_ACTCTXDATA_FORMAT
//
// MessageText:
//
// The application binding data format is invalid.
//
#define ERROR_SXS_INVALID_ACTCTXDATA_FORMAT 14002L
//
// MessageId: ERROR_SXS_ASSEMBLY_NOT_FOUND
//
// MessageText:
//
// The referenced assembly is not installed on your system.
//
#define
ERROR_SXS_ASSEMBLY_NOT_FOUND
14003L
//
// MessageId: ERROR_SXS_MANIFEST_FORMAT_ERROR
//
// MessageText:
//
// The manifest file does not begin with the required tag and format
information.
//
#define ERROR_SXS_MANIFEST_FORMAT_ERROR 14004L
//
// MessageId: ERROR_SXS_MANIFEST_PARSE_ERROR
//
// MessageText:
//
// The manifest file contains one or more syntax errors.
//
#define ERROR_SXS_MANIFEST_PARSE_ERROR 14005L
//
// MessageId: ERROR_SXS_ACTIVATION_CONTEXT_DISABLED
//
// MessageText:
//
// The application attempted to activate a disabled activation context.
//
#define ERROR_SXS_ACTIVATION_CONTEXT_DISABLED 14006L
//
// MessageId: ERROR_SXS_KEY_NOT_FOUND
//
// MessageText:
//
// The requested lookup key was not found in any active activation
context.
//
#define
ERROR_SXS_KEY_NOT_FOUND
14007L
//
// MessageId: ERROR_SXS_VERSION_CONFLICT
//
// MessageText:
//
// A component version required by the application conflicts with
another component version already active.
//
#define
ERROR_SXS_VERSION_CONFLICT
14008L
//
// MessageId: ERROR_SXS_WRONG_SECTION_TYPE
//
// MessageText:
//
// The type requested activation context section does not match the
query API used.
//
#define
ERROR_SXS_WRONG_SECTION_TYPE
14009L
//
// MessageId: ERROR_SXS_THREAD_QUERIES_DISABLED
//
// MessageText:
//
// Lack of system resources has required isolated activation to be
disabled for the current thread of execution.
//
#define ERROR_SXS_THREAD_QUERIES_DISABLED 14010L
//
// MessageId: ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET
//
// MessageText:
//
//
An attempt to set the process default activation context failed because
the process default activation context was already set.
//
#define ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET 14011L
//
// MessageId: ERROR_SXS_UNKNOWN_ENCODING_GROUP
//
// MessageText:
//
// The encoding group identifier specified is not recognized.
//
#define ERROR_SXS_UNKNOWN_ENCODING_GROUP 14012L
//
// MessageId: ERROR_SXS_UNKNOWN_ENCODING
//
// MessageText:
//
// The encoding requested is not recognized.
//
#define
ERROR_SXS_UNKNOWN_ENCODING
14013L
//
// MessageId: ERROR_SXS_INVALID_XML_NAMESPACE_URI
//
// MessageText:
//
// The manifest contains a reference to an invalid URI.
//
#define ERROR_SXS_INVALID_XML_NAMESPACE_URI 14014L
//
// MessageId: ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_NOT_INSTALLED
//
// MessageText:
//
// The application manifest contains a reference to a dependent
assembly which is not installed
//
#define ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_NOT_INSTALLED 14015L
//
// MessageId: ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED
//
// MessageText:
//
// The manifest for an assembly used by the application has a reference
to a dependent assembly which is not installed
//
#define ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED 14016L
//
// MessageId: ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE
//
// MessageText:
//
// The manifest contains an attribute for the assembly identity which
is not valid.
//
#define ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE 14017L
//
// MessageId: ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE
//
// MessageText:
//
// The manifest is missing the required default namespace specification
on the assembly element.
//
#define ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE 14018L
//
// MessageId: ERROR_SXS_MANIFEST_INVALID_REQUIRED_DEFAULT_NAMESPACE
//
// MessageText:
//
//
The manifest has a default namespace specified on the assembly element
but its value is not "urn:schemas-microsoft-com:asm.v1".
//
#define ERROR_SXS_MANIFEST_INVALID_REQUIRED_DEFAULT_NAMESPACE 14019L
//
// MessageId: ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT
//
// MessageText:
//
// The private manifest probed has crossed a path with an unsupported
reparse point.
//
#define ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT 14020L
//
// MessageId: ERROR_SXS_DUPLICATE_DLL_NAME
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the
application manifest have files by the same name.
//
#define
ERROR_SXS_DUPLICATE_DLL_NAME
14021L
//
// MessageId: ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the
application manifest have window classes with the same name.
//
#define ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME 14022L
//
// MessageId: ERROR_SXS_DUPLICATE_CLSID
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the
application manifest have the same COM server CLSIDs.
//
#define
ERROR_SXS_DUPLICATE_CLSID
14023L
//
// MessageId: ERROR_SXS_DUPLICATE_IID
//
// MessageText:
//
//
Two or more components referenced directly or indirectly by the
application manifest have proxies for the same COM interface IIDs.
//
#define
ERROR_SXS_DUPLICATE_IID
14024L
//
// MessageId: ERROR_SXS_DUPLICATE_TLBID
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the
application manifest have the same COM type library TLBIDs.
//
#define
ERROR_SXS_DUPLICATE_TLBID
14025L
//
// MessageId: ERROR_SXS_DUPLICATE_PROGID
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the
application manifest have the same COM ProgIDs.
//
#define
ERROR_SXS_DUPLICATE_PROGID
14026L
//
// MessageId: ERROR_SXS_DUPLICATE_ASSEMBLY_NAME
//
// MessageText:
//
//
Two or more components referenced directly or indirectly by the
application manifest are different versions of the same component which
is not permitted.
//
#define ERROR_SXS_DUPLICATE_ASSEMBLY_NAME 14027L
//
// MessageId: ERROR_SXS_FILE_HASH_MISMATCH
//
// MessageText:
//
// A component's file does not match the verification information
present in the component manifest.
//
#define
ERROR_SXS_FILE_HASH_MISMATCH
14028L
//
// MessageId: ERROR_SXS_POLICY_PARSE_ERROR
//
// MessageText:
//
// The policy manifest contains one or more syntax errors.
//
#define
ERROR_SXS_POLICY_PARSE_ERROR
14029L
//
// MessageId: ERROR_SXS_XML_E_MISSINGQUOTE
//
// MessageText:
//
// Manifest Parse Error : A string literal was expected, but no opening
quote character was found.
//
#define
ERROR_SXS_XML_E_MISSINGQUOTE
14030L
//
// MessageId: ERROR_SXS_XML_E_COMMENTSYNTAX
//
// MessageText:
//
// Manifest Parse Error : Incorrect syntax was used in a comment.
//
#define ERROR_SXS_XML_E_COMMENTSYNTAX
14031L
//
// MessageId: ERROR_SXS_XML_E_BADSTARTNAMECHAR
//
// MessageText:
//
// Manifest Parse Error : A name was started with an invalid character.
//
#define ERROR_SXS_XML_E_BADSTARTNAMECHAR 14032L
//
// MessageId: ERROR_SXS_XML_E_BADNAMECHAR
//
// MessageText:
//
// Manifest Parse Error : A name contained an invalid character.
//
#define
ERROR_SXS_XML_E_BADNAMECHAR
14033L
//
// MessageId: ERROR_SXS_XML_E_BADCHARINSTRING
//
// MessageText:
//
// Manifest Parse Error : A string literal contained an invalid
character.
//
#define ERROR_SXS_XML_E_BADCHARINSTRING 14034L
//
// MessageId: ERROR_SXS_XML_E_XMLDECLSYNTAX
//
// MessageText:
//
// Manifest Parse Error : Invalid syntax for an xml declaration.
//
#define ERROR_SXS_XML_E_XMLDECLSYNTAX
14035L
//
// MessageId: ERROR_SXS_XML_E_BADCHARDATA
//
// MessageText:
//
// Manifest Parse Error : An Invalid character was found in text
content.
//
#define
ERROR_SXS_XML_E_BADCHARDATA
14036L
//
// MessageId: ERROR_SXS_XML_E_MISSINGWHITESPACE
//
// MessageText:
//
// Manifest Parse Error : Required white space was missing.
//
#define ERROR_SXS_XML_E_MISSINGWHITESPACE 14037L
//
// MessageId: ERROR_SXS_XML_E_EXPECTINGTAGEND
//
// MessageText:
//
// Manifest Parse Error : The character '>' was expected.
//
#define ERROR_SXS_XML_E_EXPECTINGTAGEND 14038L
//
// MessageId: ERROR_SXS_XML_E_MISSINGSEMICOLON
//
// MessageText:
//
// Manifest Parse Error : A semi colon character was expected.
//
#define ERROR_SXS_XML_E_MISSINGSEMICOLON 14039L
//
// MessageId: ERROR_SXS_XML_E_UNBALANCEDPAREN
//
// MessageText:
//
// Manifest Parse Error : Unbalanced parentheses.
//
#define ERROR_SXS_XML_E_UNBALANCEDPAREN 14040L
//
// MessageId: ERROR_SXS_XML_E_INTERNALERROR
//
// MessageText:
//
// Manifest Parse Error : Internal error.
//
#define ERROR_SXS_XML_E_INTERNALERROR
14041L
//
// MessageId: ERROR_SXS_XML_E_UNEXPECTED_WHITESPACE
//
// MessageText:
//
// Manifest Parse Error : Whitespace is not allowed at this location.
//
#define ERROR_SXS_XML_E_UNEXPECTED_WHITESPACE 14042L
//
// MessageId: ERROR_SXS_XML_E_INCOMPLETE_ENCODING
//
// MessageText:
//
// Manifest Parse Error : End of file reached in invalid state for
current encoding.
//
#define ERROR_SXS_XML_E_INCOMPLETE_ENCODING 14043L
//
// MessageId: ERROR_SXS_XML_E_MISSING_PAREN
//
// MessageText:
//
// Manifest Parse Error : Missing parenthesis.
//
#define ERROR_SXS_XML_E_MISSING_PAREN
14044L
//
// MessageId: ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE
//
// MessageText:
//
// Manifest Parse Error : A single or double closing quote character
(\' or \") is missing.
//
#define ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE 14045L
//
// MessageId: ERROR_SXS_XML_E_MULTIPLE_COLONS
//
// MessageText:
//
// Manifest Parse Error : Multiple colons are not allowed in a name.
//
#define ERROR_SXS_XML_E_MULTIPLE_COLONS 14046L
//
// MessageId: ERROR_SXS_XML_E_INVALID_DECIMAL
//
// MessageText:
//
// Manifest Parse Error : Invalid character for decimal digit.
//
#define ERROR_SXS_XML_E_INVALID_DECIMAL 14047L
//
// MessageId: ERROR_SXS_XML_E_INVALID_HEXIDECIMAL
//
// MessageText:
//
// Manifest Parse Error : Invalid character for hexadecimal digit.
//
#define ERROR_SXS_XML_E_INVALID_HEXIDECIMAL 14048L
//
// MessageId: ERROR_SXS_XML_E_INVALID_UNICODE
//
// MessageText:
//
// Manifest Parse Error : Invalid unicode character value for this
platform.
//
#define ERROR_SXS_XML_E_INVALID_UNICODE 14049L
//
// MessageId: ERROR_SXS_XML_E_WHITESPACEORQUESTIONMARK
//
// MessageText:
//
// Manifest Parse Error : Expecting whitespace or '?'.
//
#define ERROR_SXS_XML_E_WHITESPACEORQUESTIONMARK 14050L
//
// MessageId: ERROR_SXS_XML_E_UNEXPECTEDENDTAG
//
// MessageText:
//
// Manifest Parse Error : End tag was not expected at this location.
//
#define ERROR_SXS_XML_E_UNEXPECTEDENDTAG 14051L
//
// MessageId: ERROR_SXS_XML_E_UNCLOSEDTAG
//
// MessageText:
//
// Manifest Parse Error : The following tags were not closed: %1.
//
#define
ERROR_SXS_XML_E_UNCLOSEDTAG
14052L
//
// MessageId: ERROR_SXS_XML_E_DUPLICATEATTRIBUTE
//
// MessageText:
//
// Manifest Parse Error : Duplicate attribute.
//
#define ERROR_SXS_XML_E_DUPLICATEATTRIBUTE 14053L
//
// MessageId: ERROR_SXS_XML_E_MULTIPLEROOTS
//
// MessageText:
//
// Manifest Parse Error : Only one top level element is allowed in an
XML document.
//
#define ERROR_SXS_XML_E_MULTIPLEROOTS
14054L
//
// MessageId: ERROR_SXS_XML_E_INVALIDATROOTLEVEL
//
// MessageText:
//
// Manifest Parse Error : Invalid at the top level of the document.
//
#define ERROR_SXS_XML_E_INVALIDATROOTLEVEL 14055L
//
// MessageId: ERROR_SXS_XML_E_BADXMLDECL
//
// MessageText:
//
// Manifest Parse Error : Invalid xml declaration.
//
#define
ERROR_SXS_XML_E_BADXMLDECL
14056L
//
// MessageId: ERROR_SXS_XML_E_MISSINGROOT
//
// MessageText:
//
// Manifest Parse Error : XML document must have a top level element.
//
#define
ERROR_SXS_XML_E_MISSINGROOT
14057L
//
// MessageId: ERROR_SXS_XML_E_UNEXPECTEDEOF
//
// MessageText:
//
// Manifest Parse Error : Unexpected end of file.
//
#define ERROR_SXS_XML_E_UNEXPECTEDEOF
14058L
//
// MessageId: ERROR_SXS_XML_E_BADPEREFINSUBSET
//
// MessageText:
//
// Manifest Parse Error : Parameter entities cannot be used inside
markup declarations in an internal subset.
//
#define ERROR_SXS_XML_E_BADPEREFINSUBSET 14059L
//
// MessageId: ERROR_SXS_XML_E_UNCLOSEDSTARTTAG
//
// MessageText:
//
// Manifest Parse Error : Element was not closed.
//
#define ERROR_SXS_XML_E_UNCLOSEDSTARTTAG 14060L
//
// MessageId: ERROR_SXS_XML_E_UNCLOSEDENDTAG
//
// MessageText:
//
// Manifest Parse Error : End element was missing the character
'>'.
//
#define ERROR_SXS_XML_E_UNCLOSEDENDTAG 14061L
//
// MessageId: ERROR_SXS_XML_E_UNCLOSEDSTRING
//
// MessageText:
//
// Manifest Parse Error : A string literal was not closed.
//
#define ERROR_SXS_XML_E_UNCLOSEDSTRING 14062L
//
// MessageId: ERROR_SXS_XML_E_UNCLOSEDCOMMENT
//
// MessageText:
//
// Manifest Parse Error : A comment was not closed.
//
#define ERROR_SXS_XML_E_UNCLOSEDCOMMENT 14063L
//
// MessageId: ERROR_SXS_XML_E_UNCLOSEDDECL
//
// MessageText:
//
// Manifest Parse Error : A declaration was not closed.
//
#define
ERROR_SXS_XML_E_UNCLOSEDDECL
14064L
//
// MessageId: ERROR_SXS_XML_E_UNCLOSEDCDATA
//
// MessageText:
//
// Manifest Parse Error : A CDATA section was not closed.
//
#define ERROR_SXS_XML_E_UNCLOSEDCDATA
14065L
//
// MessageId: ERROR_SXS_XML_E_RESERVEDNAMESPACE
//
// MessageText:
//
// Manifest Parse Error : The namespace prefix is not allowed to start
with the reserved string "xml".
//
#define ERROR_SXS_XML_E_RESERVEDNAMESPACE 14066L
//
// MessageId: ERROR_SXS_XML_E_INVALIDENCODING
//
// MessageText:
//
// Manifest Parse Error : System does not support the specified
encoding.
//
#define ERROR_SXS_XML_E_INVALIDENCODING 14067L
//
// MessageId: ERROR_SXS_XML_E_INVALIDSWITCH
//
// MessageText:
//
// Manifest Parse Error : Switch from current encoding to specified
encoding not supported.
//
#define ERROR_SXS_XML_E_INVALIDSWITCH
14068L
//
// MessageId: ERROR_SXS_XML_E_BADXMLCASE
//
// MessageText:
//
// Manifest Parse Error : The name 'xml' is reserved and must be lower
case.
//
#define
ERROR_SXS_XML_E_BADXMLCASE
14069L
//
// MessageId: ERROR_SXS_XML_E_INVALID_STANDALONE
//
// MessageText:
//
// Manifest Parse Error : The standalone attribute must have the value
'yes' or 'no'.
//
#define ERROR_SXS_XML_E_INVALID_STANDALONE 14070L
//
// MessageId: ERROR_SXS_XML_E_UNEXPECTED_STANDALONE
//
// MessageText:
//
// Manifest Parse Error : The standalone attribute cannot be used in
external entities.
//
#define ERROR_SXS_XML_E_UNEXPECTED_STANDALONE 14071L
//
// MessageId: ERROR_SXS_XML_E_INVALID_VERSION
//
// MessageText:
//
// Manifest Parse Error : Invalid version number.
//
#define ERROR_SXS_XML_E_INVALID_VERSION 14072L
//
// MessageId: ERROR_SXS_XML_E_MISSINGEQUALS
//
// MessageText:
//
// Manifest Parse Error : Missing equals sign between attribute and
attribute value.
//
#define ERROR_SXS_XML_E_MISSINGEQUALS
14073L
//
// MessageId: ERROR_SXS_PROTECTION_RECOVERY_FAILED
//
// MessageText:
//
// Assembly Protection Error : Unable to recover the specified assembly.
//
#define ERROR_SXS_PROTECTION_RECOVERY_FAILED 14074L
//
// MessageId: ERROR_SXS_PROTECTION_PUBLIC_KEY_TOO_SHORT
//
// MessageText:
//
// Assembly Protection Error : The public key for an assembly was too
short to be allowed.
//
#define ERROR_SXS_PROTECTION_PUBLIC_KEY_TOO_SHORT 14075L
//
// MessageId: ERROR_SXS_PROTECTION_CATALOG_NOT_VALID
//
// MessageText:
//
// Assembly Protection Error : The catalog for an assembly is not
valid, or does not match the assembly's manifest.
//
#define ERROR_SXS_PROTECTION_CATALOG_NOT_VALID 14076L
//
// MessageId: ERROR_SXS_UNTRANSLATABLE_HRESULT
//
// MessageText:
//
// An HRESULT could not be translated to a corresponding Win32 error
code.
//
#define ERROR_SXS_UNTRANSLATABLE_HRESULT 14077L
//
// MessageId: ERROR_SXS_PROTECTION_CATALOG_FILE_MISSING
//
// MessageText:
//
// Assembly Protection Error : The catalog for an assembly is missing.
//
#define ERROR_SXS_PROTECTION_CATALOG_FILE_MISSING 14078L
//
// MessageId: ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE
//
// MessageText:
//
// The supplied assembly identity is missing one or more attributes
which must be present in this context.
//
#define ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE 14079L
//
// MessageId: ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME
//
// MessageText:
//
// The supplied assembly identity has one or more attribute names that
contain characters not permitted in XML names.
//
#define ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME 14080L
//
// MessageId: ERROR_SXS_ASSEMBLY_MISSING
//
// MessageText:
//
// The referenced assembly could not be found.
//
#define
ERROR_SXS_ASSEMBLY_MISSING
14081L
//
// MessageId: ERROR_SXS_CORRUPT_ACTIVATION_STACK
//
// MessageText:
//
// The activation context activation stack for the running thread of
execution is corrupt.
//
#define ERROR_SXS_CORRUPT_ACTIVATION_STACK 14082L
//
// MessageId: ERROR_SXS_CORRUPTION
//
// MessageText:
//
// The application isolation metadata for this process or thread has
become corrupt.
//
#define
ERROR_SXS_CORRUPTION
14083L
//
// MessageId: ERROR_SXS_EARLY_DEACTIVATION
//
// MessageText:
//
// The activation context being deactivated is not the most recently
activated one.
//
#define
ERROR_SXS_EARLY_DEACTIVATION
14084L
//
// MessageId: ERROR_SXS_INVALID_DEACTIVATION
//
// MessageText:
//
// The activation context being deactivated is not active for the
current thread of execution.
//
#define ERROR_SXS_INVALID_DEACTIVATION 14085L
//
// MessageId: ERROR_SXS_MULTIPLE_DEACTIVATION
//
// MessageText:
//
// The activation context being deactivated has already been
deactivated.
//
#define ERROR_SXS_MULTIPLE_DEACTIVATION 14086L
//
// MessageId: ERROR_SXS_PROCESS_TERMINATION_REQUESTED
//
// MessageText:
//
// A component used by the isolation facility has requested to
terminate the process.
//
#define ERROR_SXS_PROCESS_TERMINATION_REQUESTED 14087L
//
// MessageId: ERROR_SXS_RELEASE_ACTIVATION_CONTEXT
//
// MessageText:
//
// A kernel mode component is releasing a reference on an activation
context.
//
#define ERROR_SXS_RELEASE_ACTIVATION_CONTEXT 14088L
//
// MessageId: ERROR_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY
//
// MessageText:
//
// The activation context of system default assembly could not be
generated.
//
#define ERROR_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY 14089L
//
// MessageId: ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE
//
// MessageText:
//
// The value of an attribute in an identity is not within the legal
range.
//
#define ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE 14090L
//
// MessageId: ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME
//
// MessageText:
//
// The name of an attribute in an identity is not within the legal
range.
//
#define ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME 14091L
//
// MessageId: ERROR_SXS_IDENTITY_DUPLICATE_ATTRIBUTE
//
// MessageText:
//
// An identity contains two definitions for the same attribute.
//
#define ERROR_SXS_IDENTITY_DUPLICATE_ATTRIBUTE 14092L
//
// MessageId: ERROR_SXS_IDENTITY_PARSE_ERROR
//
// MessageText:
//
//
The identity string is malformed. This may be due to a trailing comma,
more than two unnamed attributes, missing attribute name or missing
attribute value.
//
#define ERROR_SXS_IDENTITY_PARSE_ERROR 14093L
//
// MessageId: ERROR_MALFORMED_SUBSTITUTION_STRING
//
// MessageText:
//
//
A string containing localized substitutable content was malformed.
Either a dollar sign ($) was followed by something other than a left
parenthesis or another dollar sign or an substitution's right
parenthesis was not found.
//
#define ERROR_MALFORMED_SUBSTITUTION_STRING 14094L
//
// MessageId: ERROR_SXS_INCORRECT_PUBLIC_KEY_TOKEN
//
// MessageText:
//
// The public key token does not correspond to the public key specified.
//
#define ERROR_SXS_INCORRECT_PUBLIC_KEY_TOKEN 14095L
//
// MessageId: ERROR_UNMAPPED_SUBSTITUTION_STRING
//
// MessageText:
//
// A substitution string had no mapping.
//
#define ERROR_UNMAPPED_SUBSTITUTION_STRING 14096L
//
// MessageId: ERROR_SXS_ASSEMBLY_NOT_LOCKED
//
// MessageText:
//
// The component must be locked before making the request.
//
#define ERROR_SXS_ASSEMBLY_NOT_LOCKED
14097L
//
// MessageId: ERROR_SXS_COMPONENT_STORE_CORRUPT
//
// MessageText:
//
// The component store has been corrupted.
//
#define ERROR_SXS_COMPONENT_STORE_CORRUPT 14098L
//
// MessageId: ERROR_ADVANCED_INSTALLER_FAILED
//
// MessageText:
//
// An advanced installer failed during setup or servicing.
//
#define ERROR_ADVANCED_INSTALLER_FAILED 14099L
//
// MessageId: ERROR_XML_ENCODING_MISMATCH
//
// MessageText:
//
// The character encoding in the XML declaration did not match the
encoding used in the document.
//
#define
ERROR_XML_ENCODING_MISMATCH
14100L
//
// MessageId: ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT
//
// MessageText:
//
// The identities of the manifests are identical but their contents are
different.
//
#define ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT 14101L
//
// MessageId: ERROR_SXS_IDENTITIES_DIFFERENT
//
// MessageText:
//
// The component identities are different.
//
#define ERROR_SXS_IDENTITIES_DIFFERENT 14102L
//
// MessageId: ERROR_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT
//
// MessageText:
//
// The assembly is not a deployment.
//
#define ERROR_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT 14103L
//
// MessageId: ERROR_SXS_FILE_NOT_PART_OF_ASSEMBLY
//
// MessageText:
//
// The file is not a part of the assembly.
//
#define ERROR_SXS_FILE_NOT_PART_OF_ASSEMBLY 14104L
//
// MessageId: ERROR_SXS_MANIFEST_TOO_BIG
//
// MessageText:
//
// The size of the manifest exceeds the maximum allowed.
//
#define
ERROR_SXS_MANIFEST_TOO_BIG
14105L
//
// MessageId: ERROR_SXS_SETTING_NOT_REGISTERED
//
// MessageText:
//
// The setting is not registered.
//
#define ERROR_SXS_SETTING_NOT_REGISTERED 14106L
//
// MessageId: ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
//
// MessageText:
//
// One or more required members of the transaction are not present.
//
#define ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE 14107L
//
// MessageId: ERROR_SMI_PRIMITIVE_INSTALLER_FAILED
//
// MessageText:
//
// The SMI primitive installer failed during setup or servicing.
//
#define ERROR_SMI_PRIMITIVE_INSTALLER_FAILED 14108L
//
// MessageId: ERROR_GENERIC_COMMAND_FAILED
//
// MessageText:
//
// A generic command executable returned a result that indicates
failure.
//
#define
ERROR_GENERIC_COMMAND_FAILED
14109L
//
// MessageId: ERROR_SXS_FILE_HASH_MISSING
//
// MessageText:
//
// A component is missing file verification information in its manifest.
//
#define
ERROR_SXS_FILE_HASH_MISSING
14110L
///////////////////////////////////////////////////
//
//
//
End of Side By Side Error Codes
//
//
//
//
14000 to
14999
//
///////////////////////////////////////////////////
///////////////////////////////////////////////////
//
//
//
Start of WinEvt Error
codes
//
//
//
//
15000 to
15079
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_EVT_INVALID_CHANNEL_PATH
//
// MessageText:
//
// The specified channel path is invalid.
//
#define ERROR_EVT_INVALID_CHANNEL_PATH 15000L
//
// MessageId: ERROR_EVT_INVALID_QUERY
//
// MessageText:
//
// The specified query is invalid.
//
#define
ERROR_EVT_INVALID_QUERY
15001L
//
// MessageId: ERROR_EVT_PUBLISHER_METADATA_NOT_FOUND
//
// MessageText:
//
// The publisher metadata cannot be found in the resource.
//
#define ERROR_EVT_PUBLISHER_METADATA_NOT_FOUND 15002L
//
// MessageId: ERROR_EVT_EVENT_TEMPLATE_NOT_FOUND
//
// MessageText:
//
// The template for an event definition cannot be found in the resource
(error = %1).
//
#define ERROR_EVT_EVENT_TEMPLATE_NOT_FOUND 15003L
//
// MessageId: ERROR_EVT_INVALID_PUBLISHER_NAME
//
// MessageText:
//
// The specified publisher name is invalid.
//
#define ERROR_EVT_INVALID_PUBLISHER_NAME 15004L
//
// MessageId: ERROR_EVT_INVALID_EVENT_DATA
//
// MessageText:
//
// The event data raised by the publisher is not compatible with the
event template definition in the publisher's manifest
//
#define
ERROR_EVT_INVALID_EVENT_DATA
15005L
//
// MessageId: ERROR_EVT_CHANNEL_NOT_FOUND
//
// MessageText:
//
// The specified channel could not be found. Check channel
configuration.
//
#define
ERROR_EVT_CHANNEL_NOT_FOUND
15007L
//
// MessageId: ERROR_EVT_MALFORMED_XML_TEXT
//
// MessageText:
//
// The specified xml text was not well-formed. See Extended Error for
more details.
//
#define
ERROR_EVT_MALFORMED_XML_TEXT
15008L
//
// MessageId: ERROR_EVT_SUBSCRIPTION_TO_DIRECT_CHANNEL
//
// MessageText:
//
//
The caller is trying to subscribe to a direct channel which is not
allowed. The events for a direct channel go directly to a logfile and
cannot be subscribed to.
//
#define ERROR_EVT_SUBSCRIPTION_TO_DIRECT_CHANNEL 15009L
//
// MessageId: ERROR_EVT_CONFIGURATION_ERROR
//
// MessageText:
//
// Configuration error.
//
#define ERROR_EVT_CONFIGURATION_ERROR
15010L
//
// MessageId: ERROR_EVT_QUERY_RESULT_STALE
//
// MessageText:
//
//
The query result is stale / invalid. This may be due to the log being
cleared or rolling over after the query result was created. Users
should handle this code by releasing the query result object and
reissuing the query.
//
#define
ERROR_EVT_QUERY_RESULT_STALE
15011L
//
// MessageId: ERROR_EVT_QUERY_RESULT_INVALID_POSITION
//
// MessageText:
//
// Query result is currently at an invalid position.
//
#define ERROR_EVT_QUERY_RESULT_INVALID_POSITION 15012L
//
// MessageId: ERROR_EVT_NON_VALIDATING_MSXML
//
// MessageText:
//
// Registered MSXML doesn't support validation.
//
#define ERROR_EVT_NON_VALIDATING_MSXML 15013L
//
// MessageId: ERROR_EVT_FILTER_ALREADYSCOPED
//
// MessageText:
//
//
An expression can only be followed by a change of scope operation if it
itself evaluates to a node set and is not already part of some other
change of scope operation.
//
#define ERROR_EVT_FILTER_ALREADYSCOPED 15014L
//
// MessageId: ERROR_EVT_FILTER_NOTELTSET
//
// MessageText:
//
// Can't perform a step operation from a term that does not represent
an element set.
//
#define
ERROR_EVT_FILTER_NOTELTSET
15015L
//
// MessageId: ERROR_EVT_FILTER_INVARG
//
// MessageText:
//
//
Left hand side arguments to binary operators must be either attributes,
nodes or variables and right hand side arguments must be constants.
//
#define
ERROR_EVT_FILTER_INVARG
15016L
//
// MessageId: ERROR_EVT_FILTER_INVTEST
//
// MessageText:
//
//
A step operation must involve either a node test or, in the case of a
predicate, an algebraic expression against which to test each node in
the node set identified by the preceeding node set can be evaluated.
//
#define
ERROR_EVT_FILTER_INVTEST
15017L
//
// MessageId: ERROR_EVT_FILTER_INVTYPE
//
// MessageText:
//
// This data type is currently unsupported.
//
#define
ERROR_EVT_FILTER_INVTYPE
15018L
//
// MessageId: ERROR_EVT_FILTER_PARSEERR
//
// MessageText:
//
// A syntax error occurred at position %1!d!
//
#define
ERROR_EVT_FILTER_PARSEERR
15019L
//
// MessageId: ERROR_EVT_FILTER_UNSUPPORTEDOP
//
// MessageText:
//
// This operator is unsupported by this implementation of the filter.
//
#define ERROR_EVT_FILTER_UNSUPPORTEDOP 15020L
//
// MessageId: ERROR_EVT_FILTER_UNEXPECTEDTOKEN
//
// MessageText:
//
// The token encountered was unexpected.
//
#define ERROR_EVT_FILTER_UNEXPECTEDTOKEN 15021L
//
// MessageId: ERROR_EVT_INVALID_OPERATION_OVER_ENABLED_DIRECT_CHANNEL
//
// MessageText:
//
//
The requested operation cannot be performed over an enabled direct
channel. The channel must first be disabled before performing the
requested operation.
//
#define ERROR_EVT_INVALID_OPERATION_OVER_ENABLED_DIRECT_CHANNEL 15022L
//
// MessageId: ERROR_EVT_INVALID_CHANNEL_PROPERTY_VALUE
//
// MessageText:
//
//
Channel property %1!s! contains invalid value. The value has invalid
type, is outside of valid range, can't be updated or is not supported
by this type of channel.
//
#define ERROR_EVT_INVALID_CHANNEL_PROPERTY_VALUE 15023L
//
// MessageId: ERROR_EVT_INVALID_PUBLISHER_PROPERTY_VALUE
//
// MessageText:
//
//
Publisher property %1!s! contains invalid value. The value has invalid
type, is outside of valid range, can't be updated or is not supported
by this type of publisher.
//
#define ERROR_EVT_INVALID_PUBLISHER_PROPERTY_VALUE 15024L
//
// MessageId: ERROR_EVT_CHANNEL_CANNOT_ACTIVATE
//
// MessageText:
//
// The channel fails to activate.
//
#define ERROR_EVT_CHANNEL_CANNOT_ACTIVATE 15025L
//
// MessageId: ERROR_EVT_FILTER_TOO_COMPLEX
//
// MessageText:
//
// The xpath expression exceeded supported complexity. Please symplify
it or split it into two or more simple expressions.
//
#define
ERROR_EVT_FILTER_TOO_COMPLEX
15026L
//
// MessageId: ERROR_EVT_MESSAGE_NOT_FOUND
//
// MessageText:
//
// the message resource is present but the message is not found in the
string/message table
//
#define
ERROR_EVT_MESSAGE_NOT_FOUND
15027L
//
// MessageId: ERROR_EVT_MESSAGE_ID_NOT_FOUND
//
// MessageText:
//
// The message id for the desired message could not be found.
//
#define ERROR_EVT_MESSAGE_ID_NOT_FOUND 15028L
//
// MessageId: ERROR_EVT_UNRESOLVED_VALUE_INSERT
//
// MessageText:
//
// The substitution string for insert index (%1) could not be found.
//
#define ERROR_EVT_UNRESOLVED_VALUE_INSERT 15029L
//
// MessageId: ERROR_EVT_UNRESOLVED_PARAMETER_INSERT
//
// MessageText:
//
// The description string for parameter reference (%1) could not be
found.
//
#define ERROR_EVT_UNRESOLVED_PARAMETER_INSERT 15030L
//
// MessageId: ERROR_EVT_MAX_INSERTS_REACHED
//
// MessageText:
//
// The maximum number of replacements has been reached.
//
#define ERROR_EVT_MAX_INSERTS_REACHED
15031L
//
// MessageId: ERROR_EVT_EVENT_DEFINITION_NOT_FOUND
//
// MessageText:
//
// The event definition could not be found for event id (%1).
//
#define ERROR_EVT_EVENT_DEFINITION_NOT_FOUND 15032L
//
// MessageId: ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND
//
// MessageText:
//
// The locale specific resource for the desired message is not present.
//
#define ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND 15033L
//
// MessageId: ERROR_EVT_VERSION_TOO_OLD
//
// MessageText:
//
// The resource is too old to be compatible.
//
#define
ERROR_EVT_VERSION_TOO_OLD
15034L
//
// MessageId: ERROR_EVT_VERSION_TOO_NEW
//
// MessageText:
//
// The resource is too new to be compatible.
//
#define
ERROR_EVT_VERSION_TOO_NEW
15035L
//
// MessageId: ERROR_EVT_CANNOT_OPEN_CHANNEL_OF_QUERY
//
// MessageText:
//
// The channel at index %1!d! of the query can't be opened.
//
#define ERROR_EVT_CANNOT_OPEN_CHANNEL_OF_QUERY 15036L
//
// MessageId: ERROR_EVT_PUBLISHER_DISABLED
//
// MessageText:
//
//
The publisher has been disabled and its resource is not avaiable. This
usually occurs when the publisher is in the process of being
uninstalled or upgraded.
//
#define
ERROR_EVT_PUBLISHER_DISABLED
15037L
//
// MessageId: ERROR_EVT_FILTER_OUT_OF_RANGE
//
// MessageText:
//
// Attempted to create a numeric type that is outside of its valid
range.
//
#define ERROR_EVT_FILTER_OUT_OF_RANGE
15038L
///////////////////////////////////////////////////
//
//
//
Start of Wecsvc Error
codes
//
//
//
//
15080 to
15099
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_EC_SUBSCRIPTION_CANNOT_ACTIVATE
//
// MessageText:
//
// The subscription fails to activate.
//
#define ERROR_EC_SUBSCRIPTION_CANNOT_ACTIVATE 15080L
//
// MessageId: ERROR_EC_LOG_DISABLED
//
// MessageText:
//
//
The log of the subscription is in disabled state, and can not be used
to forward events to. The log must first be enabled before the
subscription can be activated.
//
#define
ERROR_EC_LOG_DISABLED
15081L
//
// MessageId: ERROR_EC_CIRCULAR_FORWARDING
//
// MessageText:
//
//
When forwarding events from local machine to itself, the query of the
subscription can't contain target log of the subscription.
//
#define
ERROR_EC_CIRCULAR_FORWARDING
15082L
//
// MessageId: ERROR_EC_CREDSTORE_FULL
//
// MessageText:
//
// The credential store that is used to save credentials is full.
//
#define
ERROR_EC_CREDSTORE_FULL
15083L
//
// MessageId: ERROR_EC_CRED_NOT_FOUND
//
// MessageText:
//
// The credential used by this subscription can't be found in
credential store.
//
#define
ERROR_EC_CRED_NOT_FOUND
15084L
//
// MessageId: ERROR_EC_NO_ACTIVE_CHANNEL
//
// MessageText:
//
// No active channel is found for the query.
//
#define
ERROR_EC_NO_ACTIVE_CHANNEL
15085L
///////////////////////////////////////////////////
//
//
//
Start of MUI Error
codes
//
//
//
//
15100 to
15199
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_MUI_FILE_NOT_FOUND
//
// MessageText:
//
// The resource loader failed to find MUI file.
//
#define
ERROR_MUI_FILE_NOT_FOUND
15100L
//
// MessageId: ERROR_MUI_INVALID_FILE
//
// MessageText:
//
// The resource loader failed to load MUI file because the file fail to
pass validation.
//
#define
ERROR_MUI_INVALID_FILE
15101L
//
// MessageId: ERROR_MUI_INVALID_RC_CONFIG
//
// MessageText:
//
// The RC Manifest is corrupted with garbage data or unsupported
version or missing required item.
//
#define
ERROR_MUI_INVALID_RC_CONFIG
15102L
//
// MessageId: ERROR_MUI_INVALID_LOCALE_NAME
//
// MessageText:
//
// The RC Manifest has invalid culture name.
//
#define ERROR_MUI_INVALID_LOCALE_NAME
15103L
//
// MessageId: ERROR_MUI_INVALID_ULTIMATEFALLBACK_NAME
//
// MessageText:
//
// The RC Manifest has invalid ultimatefallback name.
//
#define ERROR_MUI_INVALID_ULTIMATEFALLBACK_NAME
15104L
//
// MessageId: ERROR_MUI_FILE_NOT_LOADED
//
// MessageText:
//
// The resource loader cache doesn't have loaded MUI entry.
//
#define
ERROR_MUI_FILE_NOT_LOADED
15105L
//
// MessageId: ERROR_RESOURCE_ENUM_USER_STOP
//
// MessageText:
//
// User stopped resource enumeration.
//
#define ERROR_RESOURCE_ENUM_USER_STOP
15106L
//
// MessageId: ERROR_MUI_INTLSETTINGS_UILANG_NOT_INSTALLED
//
// MessageText:
//
// UI language installation failed.
//
#define ERROR_MUI_INTLSETTINGS_UILANG_NOT_INSTALLED 15107L
//
// MessageId: ERROR_MUI_INTLSETTINGS_INVALID_LOCALE_NAME
//
// MessageText:
//
// Locale installation failed.
//
#define ERROR_MUI_INTLSETTINGS_INVALID_LOCALE_NAME 15108L
///////////////////////////////////////////////////
//
//
// Start of Monitor Configuration API error codes//
//
//
//
15200 to
15249
//
///////////////////////////////////////////////////
//
// MessageId: ERROR_MCA_INVALID_CAPABILITIES_STRING
//
// MessageText:
//
//
The monitor returned a DDC/CI capabilities string that did not comply
with the ACCESS.bus 3.0, DDC/CI 1.1 or MCCS 2 Revision 1 specification.
//
#define ERROR_MCA_INVALID_CAPABILITIES_STRING 15200L
//
// MessageId: ERROR_MCA_INVALID_VCP_VERSION
//
// MessageText:
//
// The monitor's VCP Version (0xDF) VCP code returned an invalid
version value.
//
#define ERROR_MCA_INVALID_VCP_VERSION
15201L
//
// MessageId: ERROR_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION
//
// MessageText:
//
// The monitor does not comply with the MCCS specification it claims to
support.
//
#define ERROR_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION 15202L
//
// MessageId: ERROR_MCA_MCCS_VERSION_MISMATCH
//
// MessageText:
//
//
The MCCS version in a monitor's mccs_ver capability does not match the
MCCS version the monitor reports when the VCP Version (0xDF) VCP code
is used.
//
#define ERROR_MCA_MCCS_VERSION_MISMATCH 15203L
//
// MessageId: ERROR_MCA_UNSUPPORTED_MCCS_VERSION
//
// MessageText:
//
//
The Monitor Configuration API only works with monitors that support the
MCCS 1.0 specification, MCCS 2.0 specification or the MCCS 2.0 Revision
1 specification.
//
#define ERROR_MCA_UNSUPPORTED_MCCS_VERSION 15204L
//
// MessageId: ERROR_MCA_INTERNAL_ERROR
//
// MessageText:
//
// An internal Monitor Configuration API error occurred.
//
#define
ERROR_MCA_INTERNAL_ERROR
15205L
//
// MessageId: ERROR_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED
//
// MessageText:
//
//
The monitor returned an invalid monitor technology type. CRT, Plasma
and LCD (TFT) are examples of monitor technology types. This error
implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1
specification.
//
#define ERROR_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED 15206L
//
// MessageId: ERROR_MCA_UNSUPPORTED_COLOR_TEMPERATURE
//
// MessageText:
//
//
The caller of SetMonitorColorTemperature specified a color temperature
that the current monitor did not support. This error implies that the
monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
//
#define ERROR_MCA_UNSUPPORTED_COLOR_TEMPERATURE 15207L
//////////////////////////////////////////////////
//
//
// End of Monitor Configuration API error codes //
//
//
//
15200 to
15249
//
//
//
//////////////////////////////////////////////////
//////////////////////////////////////////////////
//
//
//
Start of
Syspart error
codes
//
//
15250 -
15299
//
//
//
//////////////////////////////////////////////////
//
// MessageId: ERROR_AMBIGUOUS_SYSTEM_DEVICE
//
// MessageText:
//
//
The requested system device cannot be identified due to multiple
indistinguishable devices potentially matching the identification
criteria.
//
#define ERROR_AMBIGUOUS_SYSTEM_DEVICE
15250L
//
// MessageId: ERROR_SYSTEM_DEVICE_NOT_FOUND
//
// MessageText:
//
// The requested system device cannot be found.
//
#define ERROR_SYSTEM_DEVICE_NOT_FOUND
15299L
//////////////////////////////////////////////////
//
//
//
Start of
Vortex error
codes
//
//
15300 -
15320
//
//
//
//////////////////////////////////////////////////
//
// MessageId: ERROR_HASH_NOT_SUPPORTED
//
// MessageText:
//
// Hash generation for the specified hash version and hash type is not
enabled on the server.
//
#define
ERROR_HASH_NOT_SUPPORTED
15300L
//
// MessageId: ERROR_HASH_NOT_PRESENT
//
// MessageText:
//
// The hash requested from the server is not available or no longer
valid.
//
#define
ERROR_HASH_NOT_PRESENT
15301L
////////////////////////////////////
//
//
// COM Error
Codes
//
//
//
////////////////////////////////////
//
// The return value of COM functions and methods is an HRESULT.
// This is not a handle to anything, but is merely a 32-bit value
// with several fields encoded in the value. The parts of an
// HRESULT are shown below.
//
// Many of the macros and functions below were orginally defined to
// operate on SCODEs. SCODEs are no longer used. The macros are
// still present for compatibility and easy porting of Win16 code.
// Newly written code should use the HRESULT macros and functions.
//
//
// HRESULTs are 32 bit values layed out as follows:
//
// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8
7 6 5 4 3 2 1 0
//
+-+-+-+-+-+---------------------+-------------------------------+
//
|S|R|C|N|r|
Facility
|
Code
|
//
+-+-+-+-+-+---------------------+-------------------------------+
//
// where
//
// S - Severity -
indicates success/fail
//
//
0 - Success
//
1 - Fail (COERROR)
//
// R - reserved
portion of the facility code, corresponds to NT's
//
second severity bit.
//
// C - reserved
portion of the facility code, corresponds to NT's
//
C field.
//
// N - reserved
portion of the facility code. Used to indicate a
//
mapped NT status value.
//
// r - reserved
portion of the facility code. Reserved for internal
//
use. Used to indicate HRESULT values that are not status
//
values, but are instead message ids for display strings.
//
// Facility - is the
facility code
//
// Code - is the
facility's status code
//
//
// Severity values
//
#define
SEVERITY_SUCCESS 0
#define
SEVERITY_ERROR 1
//
// Generic test for success on any status value (non-negative numbers
// indicate success).
//
#define SUCCEEDED(hr) (((HRESULT)(hr)) >= 0)
//
// and the inverse
//
#define FAILED(hr) (((HRESULT)(hr)) < 0)
//
// Generic test for error on any status value.
//
#define IS_ERROR(Status) (((unsigned long)(Status)) >> 31 == SEVERITY_ERROR)
//
// Return the code
//
#define
HRESULT_CODE(hr) ((hr) & 0xFFFF)
#define
SCODE_CODE(sc) ((sc)
& 0xFFFF)
//
// Return the facility
//
#define
HRESULT_FACILITY(hr) (((hr) >> 16) &
0x1fff)
#define SCODE_FACILITY(sc) (((sc)
>> 16) & 0x1fff)
//
// Return the severity
//
#define
HRESULT_SEVERITY(hr) (((hr) >> 31) &
0x1)
#define SCODE_SEVERITY(sc) (((sc)
>> 31) & 0x1)
//
// Create an HRESULT value from component pieces
//
#define
MAKE_HRESULT(sev,fac,code) \
((HRESULT) (((unsigned
long)(sev)<<31) | ((unsigned
long)(fac)<<16) | ((unsigned long)(code))) )
#define MAKE_SCODE(sev,fac,code) \
((SCODE) (((unsigned
long)(sev)<<31) | ((unsigned
long)(fac)<<16) | ((unsigned long)(code))) )
//
// Map a WIN32 error value into a HRESULT
// Note: This assumes that WIN32 errors fall in the range -32k to 32k.
//
// Define bits here so macros are guaranteed to work
#define FACILITY_NT_BIT 0x10000000
//
// HRESULT_FROM_WIN32(x) used to be a macro, however we now run it as
an inline function
// to prevent double evaluation of 'x'. If you still need the macro,
you can use __HRESULT_FROM_WIN32(x)
//
#define
__HRESULT_FROM_WIN32(x) ((HRESULT)(x) <= 0 ? ((HRESULT)(x)) :
((HRESULT) (((x) & 0x0000FFFF) | (FACILITY_WIN32
<< 16) |
0x80000000)))
#if
!defined(_HRESULT_DEFINED) && !defined(__midl)
#define _HRESULT_DEFINED
typedef __success(return >= 0) long HRESULT;
#endif
#ifndef
__midl
FORCEINLINE
HRESULT HRESULT_FROM_WIN32(unsigned long x) { return (HRESULT)(x)
<=
0 ? (HRESULT)(x) : (HRESULT) (((x) & 0x0000FFFF) |
(FACILITY_WIN32
<< 16) | 0x80000000);}
#else
#define HRESULT_FROM_WIN32(x) __HRESULT_FROM_WIN32(x)
#endif
//
// Map an NT status value into a HRESULT
//
#define HRESULT_FROM_NT(x) ((HRESULT) ((x) | FACILITY_NT_BIT))
// ****** OBSOLETE functions
//
HRESULT functions
// As noted above, these functions are obsolete and should not be used.
// Extract the SCODE from a HRESULT
#define GetScode(hr) ((SCODE) (hr))
// Convert an SCODE into an HRESULT.
#define ResultFromScode(sc) ((HRESULT) (sc))
// PropagateResult is a noop
#define PropagateResult(hrPrevious, scBase) ((HRESULT) scBase)
// ****** End of OBSOLETE functions.
#define
E_NOT_SET
HRESULT_FROM_WIN32(ERROR_NOT_FOUND)
#define
E_NOT_VALID_STATE
HRESULT_FROM_WIN32(ERROR_INVALID_STATE)
#define E_NOT_SUFFICIENT_BUFFER
HRESULT_FROM_WIN32(ERROR_INSUFFICIENT_BUFFER)
//
---------------------- HRESULT value definitions -----------------
//
// HRESULT definitions
//
#ifdef
RC_INVOKED
#define _HRESULT_TYPEDEF_(_sc) _sc
#else // RC_INVOKED
#define _HRESULT_TYPEDEF_(_sc) ((HRESULT)_sc)
#endif // RC_INVOKED
#define NOERROR 0
//
// Error definitions follow
//
//
// Codes 0x4000-0x40ff are reserved for OLE
//
//
// Error codes
//
//
// MessageId: E_UNEXPECTED
//
// MessageText:
//
// Catastrophic failure
//
#define
E_UNEXPECTED
_HRESULT_TYPEDEF_(0x8000FFFFL)
#if
defined(_WIN32) && !defined(_MAC)
//
// MessageId: E_NOTIMPL
//
// MessageText:
//
// Not implemented
//
#define
E_NOTIMPL
_HRESULT_TYPEDEF_(0x80004001L)
//
// MessageId: E_OUTOFMEMORY
//
// MessageText:
//
// Ran out of memory
//
#define
E_OUTOFMEMORY
_HRESULT_TYPEDEF_(0x8007000EL)
//
// MessageId: E_INVALIDARG
//
// MessageText:
//
// One or more arguments are invalid
//
#define
E_INVALIDARG
_HRESULT_TYPEDEF_(0x80070057L)
//
// MessageId: E_NOINTERFACE
//
// MessageText:
//
// No such interface supported
//
#define
E_NOINTERFACE
_HRESULT_TYPEDEF_(0x80004002L)
//
// MessageId: E_POINTER
//
// MessageText:
//
// Invalid pointer
//
#define
E_POINTER
_HRESULT_TYPEDEF_(0x80004003L)
//
// MessageId: E_HANDLE
//
// MessageText:
//
// Invalid handle
//
#define
E_HANDLE
_HRESULT_TYPEDEF_(0x80070006L)
//
// MessageId: E_ABORT
//
// MessageText:
//
// Operation aborted
//
#define
E_ABORT
_HRESULT_TYPEDEF_(0x80004004L)
//
// MessageId: E_FAIL
//
// MessageText:
//
// Unspecified error
//
#define
E_FAIL
_HRESULT_TYPEDEF_(0x80004005L)
//
// MessageId: E_ACCESSDENIED
//
// MessageText:
//
// General access denied error
//
#define
E_ACCESSDENIED
_HRESULT_TYPEDEF_(0x80070005L)
#else
//
// MessageId: E_NOTIMPL
//
// MessageText:
//
// Not implemented
//
#define
E_NOTIMPL
_HRESULT_TYPEDEF_(0x80000001L)
//
// MessageId: E_OUTOFMEMORY
//
// MessageText:
//
// Ran out of memory
//
#define
E_OUTOFMEMORY
_HRESULT_TYPEDEF_(0x80000002L)
//
// MessageId: E_INVALIDARG
//
// MessageText:
//
// One or more arguments are invalid
//
#define
E_INVALIDARG
_HRESULT_TYPEDEF_(0x80000003L)
//
// MessageId: E_NOINTERFACE
//
// MessageText:
//
// No such interface supported
//
#define
E_NOINTERFACE
_HRESULT_TYPEDEF_(0x80000004L)
//
// MessageId: E_POINTER
//
// MessageText:
//
// Invalid pointer
//
#define
E_POINTER
_HRESULT_TYPEDEF_(0x80000005L)
//
// MessageId: E_HANDLE
//
// MessageText:
//
// Invalid handle
//
#define
E_HANDLE
_HRESULT_TYPEDEF_(0x80000006L)
//
// MessageId: E_ABORT
//
// MessageText:
//
// Operation aborted
//
#define
E_ABORT
_HRESULT_TYPEDEF_(0x80000007L)
//
// MessageId: E_FAIL
//
// MessageText:
//
// Unspecified error
//
#define
E_FAIL
_HRESULT_TYPEDEF_(0x80000008L)
//
// MessageId: E_ACCESSDENIED
//
// MessageText:
//
// General access denied error
//
#define
E_ACCESSDENIED
_HRESULT_TYPEDEF_(0x80000009L)
#endif
//WIN32
//
// MessageId: E_PENDING
//
// MessageText:
//
// The data necessary to complete this operation is not yet available.
//
#define
E_PENDING
_HRESULT_TYPEDEF_(0x8000000AL)
//
// MessageId: CO_E_INIT_TLS
//
// MessageText:
//
// Thread local storage failure
//
#define
CO_E_INIT_TLS
_HRESULT_TYPEDEF_(0x80004006L)
//
// MessageId: CO_E_INIT_SHARED_ALLOCATOR
//
// MessageText:
//
// Get shared memory allocator failure
//
#define
CO_E_INIT_SHARED_ALLOCATOR
_HRESULT_TYPEDEF_(0x80004007L)
//
// MessageId: CO_E_INIT_MEMORY_ALLOCATOR
//
// MessageText:
//
// Get memory allocator failure
//
#define
CO_E_INIT_MEMORY_ALLOCATOR
_HRESULT_TYPEDEF_(0x80004008L)
//
// MessageId: CO_E_INIT_CLASS_CACHE
//
// MessageText:
//
// Unable to initialize class cache
//
#define
CO_E_INIT_CLASS_CACHE
_HRESULT_TYPEDEF_(0x80004009L)
//
// MessageId: CO_E_INIT_RPC_CHANNEL
//
// MessageText:
//
// Unable to initialize RPC services
//
#define
CO_E_INIT_RPC_CHANNEL
_HRESULT_TYPEDEF_(0x8000400AL)
//
// MessageId: CO_E_INIT_TLS_SET_CHANNEL_CONTROL
//
// MessageText:
//
// Cannot set thread local storage channel control
//
#define CO_E_INIT_TLS_SET_CHANNEL_CONTROL _HRESULT_TYPEDEF_(0x8000400BL)
//
// MessageId: CO_E_INIT_TLS_CHANNEL_CONTROL
//
// MessageText:
//
// Could not allocate thread local storage channel control
//
#define CO_E_INIT_TLS_CHANNEL_CONTROL
_HRESULT_TYPEDEF_(0x8000400CL)
//
// MessageId: CO_E_INIT_UNACCEPTED_USER_ALLOCATOR
//
// MessageText:
//
// The user supplied memory allocator is unacceptable
//
#define CO_E_INIT_UNACCEPTED_USER_ALLOCATOR
_HRESULT_TYPEDEF_(0x8000400DL)
//
// MessageId: CO_E_INIT_SCM_MUTEX_EXISTS
//
// MessageText:
//
// The OLE service mutex already exists
//
#define
CO_E_INIT_SCM_MUTEX_EXISTS
_HRESULT_TYPEDEF_(0x8000400EL)
//
// MessageId: CO_E_INIT_SCM_FILE_MAPPING_EXISTS
//
// MessageText:
//
// The OLE service file mapping already exists
//
#define CO_E_INIT_SCM_FILE_MAPPING_EXISTS _HRESULT_TYPEDEF_(0x8000400FL)
//
// MessageId: CO_E_INIT_SCM_MAP_VIEW_OF_FILE
//
// MessageText:
//
// Unable to map view of file for OLE service
//
#define CO_E_INIT_SCM_MAP_VIEW_OF_FILE
_HRESULT_TYPEDEF_(0x80004010L)
//
// MessageId: CO_E_INIT_SCM_EXEC_FAILURE
//
// MessageText:
//
// Failure attempting to launch OLE service
//
#define
CO_E_INIT_SCM_EXEC_FAILURE
_HRESULT_TYPEDEF_(0x80004011L)
//
// MessageId: CO_E_INIT_ONLY_SINGLE_THREADED
//
// MessageText:
//
// There was an attempt to call CoInitialize a second time while single
threaded
//
#define CO_E_INIT_ONLY_SINGLE_THREADED
_HRESULT_TYPEDEF_(0x80004012L)
//
// MessageId: CO_E_CANT_REMOTE
//
// MessageText:
//
// A Remote activation was necessary but was not allowed
//
#define
CO_E_CANT_REMOTE
_HRESULT_TYPEDEF_(0x80004013L)
//
// MessageId: CO_E_BAD_SERVER_NAME
//
// MessageText:
//
// A Remote activation was necessary but the server name provided was
invalid
//
#define
CO_E_BAD_SERVER_NAME
_HRESULT_TYPEDEF_(0x80004014L)
//
// MessageId: CO_E_WRONG_SERVER_IDENTITY
//
// MessageText:
//
// The class is configured to run as a security id different from the
caller
//
#define
CO_E_WRONG_SERVER_IDENTITY
_HRESULT_TYPEDEF_(0x80004015L)
//
// MessageId: CO_E_OLE1DDE_DISABLED
//
// MessageText:
//
// Use of Ole1 services requiring DDE windows is disabled
//
#define
CO_E_OLE1DDE_DISABLED
_HRESULT_TYPEDEF_(0x80004016L)
//
// MessageId: CO_E_RUNAS_SYNTAX
//
// MessageText:
//
// A RunAs specification must be <domain
name>\<user name> or simply <user
name>
//
#define
CO_E_RUNAS_SYNTAX
_HRESULT_TYPEDEF_(0x80004017L)
//
// MessageId: CO_E_CREATEPROCESS_FAILURE
//
// MessageText:
//
// The server process could not be started. The pathname may be
incorrect.
//
#define
CO_E_CREATEPROCESS_FAILURE
_HRESULT_TYPEDEF_(0x80004018L)
//
// MessageId: CO_E_RUNAS_CREATEPROCESS_FAILURE
//
// MessageText:
//
// The server process could not be started as the configured identity.
The pathname may be incorrect or unavailable.
//
#define CO_E_RUNAS_CREATEPROCESS_FAILURE _HRESULT_TYPEDEF_(0x80004019L)
//
// MessageId: CO_E_RUNAS_LOGON_FAILURE
//
// MessageText:
//
// The server process could not be started because the configured
identity is incorrect. Check the username and password.
//
#define
CO_E_RUNAS_LOGON_FAILURE
_HRESULT_TYPEDEF_(0x8000401AL)
//
// MessageId: CO_E_LAUNCH_PERMSSION_DENIED
//
// MessageText:
//
// The client is not allowed to launch this server.
//
#define
CO_E_LAUNCH_PERMSSION_DENIED
_HRESULT_TYPEDEF_(0x8000401BL)
//
// MessageId: CO_E_START_SERVICE_FAILURE
//
// MessageText:
//
// The service providing this server could not be started.
//
#define
CO_E_START_SERVICE_FAILURE
_HRESULT_TYPEDEF_(0x8000401CL)
//
// MessageId: CO_E_REMOTE_COMMUNICATION_FAILURE
//
// MessageText:
//
// This computer was unable to communicate with the computer providing
the server.
//
#define CO_E_REMOTE_COMMUNICATION_FAILURE _HRESULT_TYPEDEF_(0x8000401DL)
//
// MessageId: CO_E_SERVER_START_TIMEOUT
//
// MessageText:
//
// The server did not respond after being launched.
//
#define
CO_E_SERVER_START_TIMEOUT
_HRESULT_TYPEDEF_(0x8000401EL)
//
// MessageId: CO_E_CLSREG_INCONSISTENT
//
// MessageText:
//
// The registration information for this server is inconsistent or
incomplete.
//
#define
CO_E_CLSREG_INCONSISTENT
_HRESULT_TYPEDEF_(0x8000401FL)
//
// MessageId: CO_E_IIDREG_INCONSISTENT
//
// MessageText:
//
// The registration information for this interface is inconsistent or
incomplete.
//
#define
CO_E_IIDREG_INCONSISTENT
_HRESULT_TYPEDEF_(0x80004020L)
//
// MessageId: CO_E_NOT_SUPPORTED
//
// MessageText:
//
// The operation attempted is not supported.
//
#define
CO_E_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80004021L)
//
// MessageId: CO_E_RELOAD_DLL
//
// MessageText:
//
// A dll must be loaded.
//
#define
CO_E_RELOAD_DLL
_HRESULT_TYPEDEF_(0x80004022L)
//
// MessageId: CO_E_MSI_ERROR
//
// MessageText:
//
// A Microsoft Software Installer error was encountered.
//
#define
CO_E_MSI_ERROR
_HRESULT_TYPEDEF_(0x80004023L)
//
// MessageId: CO_E_ATTEMPT_TO_CREATE_OUTSIDE_CLIENT_CONTEXT
//
// MessageText:
//
// The specified activation could not occur in the client context as
specified.
//
#define CO_E_ATTEMPT_TO_CREATE_OUTSIDE_CLIENT_CONTEXT
_HRESULT_TYPEDEF_(0x80004024L)
//
// MessageId: CO_E_SERVER_PAUSED
//
// MessageText:
//
// Activations on the server are paused.
//
#define
CO_E_SERVER_PAUSED
_HRESULT_TYPEDEF_(0x80004025L)
//
// MessageId: CO_E_SERVER_NOT_PAUSED
//
// MessageText:
//
// Activations on the server are not paused.
//
#define
CO_E_SERVER_NOT_PAUSED
_HRESULT_TYPEDEF_(0x80004026L)
//
// MessageId: CO_E_CLASS_DISABLED
//
// MessageText:
//
// The component or application containing the component has been
disabled.
//
#define
CO_E_CLASS_DISABLED
_HRESULT_TYPEDEF_(0x80004027L)
//
// MessageId: CO_E_CLRNOTAVAILABLE
//
// MessageText:
//
// The common language runtime is not available
//
#define
CO_E_CLRNOTAVAILABLE
_HRESULT_TYPEDEF_(0x80004028L)
//
// MessageId: CO_E_ASYNC_WORK_REJECTED
//
// MessageText:
//
// The thread-pool rejected the submitted asynchronous work.
//
#define
CO_E_ASYNC_WORK_REJECTED
_HRESULT_TYPEDEF_(0x80004029L)
//
// MessageId: CO_E_SERVER_INIT_TIMEOUT
//
// MessageText:
//
// The server started, but did not finish initializing in a timely
fashion.
//
#define
CO_E_SERVER_INIT_TIMEOUT
_HRESULT_TYPEDEF_(0x8000402AL)
//
// MessageId: CO_E_NO_SECCTX_IN_ACTIVATE
//
// MessageText:
//
// Unable to complete the call since there is no COM+ security context
inside IObjectControl.Activate.
//
#define
CO_E_NO_SECCTX_IN_ACTIVATE
_HRESULT_TYPEDEF_(0x8000402BL)
//
// MessageId: CO_E_TRACKER_CONFIG
//
// MessageText:
//
// The provided tracker configuration is invalid
//
#define
CO_E_TRACKER_CONFIG
_HRESULT_TYPEDEF_(0x80004030L)
//
// MessageId: CO_E_THREADPOOL_CONFIG
//
// MessageText:
//
// The provided thread pool configuration is invalid
//
#define
CO_E_THREADPOOL_CONFIG
_HRESULT_TYPEDEF_(0x80004031L)
//
// MessageId: CO_E_SXS_CONFIG
//
// MessageText:
//
// The provided side-by-side configuration is invalid
//
#define
CO_E_SXS_CONFIG
_HRESULT_TYPEDEF_(0x80004032L)
//
// MessageId: CO_E_MALFORMED_SPN
//
// MessageText:
//
// The server principal name (SPN) obtained during security negotiation
is malformed.
//
#define
CO_E_MALFORMED_SPN
_HRESULT_TYPEDEF_(0x80004033L)
//
// Success codes
//
#define
S_OK
((HRESULT)0L)
#define
S_FALSE
((HRESULT)1L)
//
******************
// FACILITY_ITF
// ******************
//
// Codes 0x0-0x01ff are reserved for the OLE group of
// interfaces.
//
//
// Generic OLE errors that may be returned by many inerfaces
//
#define
OLE_E_FIRST ((HRESULT)0x80040000L)
#define OLE_E_LAST ((HRESULT)0x800400FFL)
#define OLE_S_FIRST ((HRESULT)0x00040000L)
#define OLE_S_LAST ((HRESULT)0x000400FFL)
//
// Old OLE errors
//
//
// MessageId: OLE_E_OLEVERB
//
// MessageText:
//
// Invalid OLEVERB structure
//
#define
OLE_E_OLEVERB
_HRESULT_TYPEDEF_(0x80040000L)
//
// MessageId: OLE_E_ADVF
//
// MessageText:
//
// Invalid advise flags
//
#define
OLE_E_ADVF
_HRESULT_TYPEDEF_(0x80040001L)
//
// MessageId: OLE_E_ENUM_NOMORE
//
// MessageText:
//
// Can't enumerate any more, because the associated data is missing
//
#define
OLE_E_ENUM_NOMORE
_HRESULT_TYPEDEF_(0x80040002L)
//
// MessageId: OLE_E_ADVISENOTSUPPORTED
//
// MessageText:
//
// This implementation doesn't take advises
//
#define
OLE_E_ADVISENOTSUPPORTED
_HRESULT_TYPEDEF_(0x80040003L)
//
// MessageId: OLE_E_NOCONNECTION
//
// MessageText:
//
// There is no connection for this connection ID
//
#define
OLE_E_NOCONNECTION
_HRESULT_TYPEDEF_(0x80040004L)
//
// MessageId: OLE_E_NOTRUNNING
//
// MessageText:
//
// Need to run the object to perform this operation
//
#define
OLE_E_NOTRUNNING
_HRESULT_TYPEDEF_(0x80040005L)
//
// MessageId: OLE_E_NOCACHE
//
// MessageText:
//
// There is no cache to operate on
//
#define
OLE_E_NOCACHE
_HRESULT_TYPEDEF_(0x80040006L)
//
// MessageId: OLE_E_BLANK
//
// MessageText:
//
// Uninitialized object
//
#define
OLE_E_BLANK
_HRESULT_TYPEDEF_(0x80040007L)
//
// MessageId: OLE_E_CLASSDIFF
//
// MessageText:
//
// Linked object's source class has changed
//
#define
OLE_E_CLASSDIFF
_HRESULT_TYPEDEF_(0x80040008L)
//
// MessageId: OLE_E_CANT_GETMONIKER
//
// MessageText:
//
// Not able to get the moniker of the object
//
#define
OLE_E_CANT_GETMONIKER
_HRESULT_TYPEDEF_(0x80040009L)
//
// MessageId: OLE_E_CANT_BINDTOSOURCE
//
// MessageText:
//
// Not able to bind to the source
//
#define
OLE_E_CANT_BINDTOSOURCE
_HRESULT_TYPEDEF_(0x8004000AL)
//
// MessageId: OLE_E_STATIC
//
// MessageText:
//
// Object is static; operation not allowed
//
#define
OLE_E_STATIC
_HRESULT_TYPEDEF_(0x8004000BL)
//
// MessageId: OLE_E_PROMPTSAVECANCELLED
//
// MessageText:
//
// User canceled out of save dialog
//
#define
OLE_E_PROMPTSAVECANCELLED
_HRESULT_TYPEDEF_(0x8004000CL)
//
// MessageId: OLE_E_INVALIDRECT
//
// MessageText:
//
// Invalid rectangle
//
#define
OLE_E_INVALIDRECT
_HRESULT_TYPEDEF_(0x8004000DL)
//
// MessageId: OLE_E_WRONGCOMPOBJ
//
// MessageText:
//
// compobj.dll is too old for the ole2.dll initialized
//
#define
OLE_E_WRONGCOMPOBJ
_HRESULT_TYPEDEF_(0x8004000EL)
//
// MessageId: OLE_E_INVALIDHWND
//
// MessageText:
//
// Invalid window handle
//
#define
OLE_E_INVALIDHWND
_HRESULT_TYPEDEF_(0x8004000FL)
//
// MessageId: OLE_E_NOT_INPLACEACTIVE
//
// MessageText:
//
// Object is not in any of the inplace active states
//
#define
OLE_E_NOT_INPLACEACTIVE
_HRESULT_TYPEDEF_(0x80040010L)
//
// MessageId: OLE_E_CANTCONVERT
//
// MessageText:
//
// Not able to convert object
//
#define
OLE_E_CANTCONVERT
_HRESULT_TYPEDEF_(0x80040011L)
//
// MessageId: OLE_E_NOSTORAGE
//
// MessageText:
//
// Not able to perform the operation because object is not given
storage yet
//
#define
OLE_E_NOSTORAGE
_HRESULT_TYPEDEF_(0x80040012L)
//
// MessageId: DV_E_FORMATETC
//
// MessageText:
//
// Invalid FORMATETC structure
//
#define
DV_E_FORMATETC
_HRESULT_TYPEDEF_(0x80040064L)
//
// MessageId: DV_E_DVTARGETDEVICE
//
// MessageText:
//
// Invalid DVTARGETDEVICE structure
//
#define
DV_E_DVTARGETDEVICE
_HRESULT_TYPEDEF_(0x80040065L)
//
// MessageId: DV_E_STGMEDIUM
//
// MessageText:
//
// Invalid STDGMEDIUM structure
//
#define
DV_E_STGMEDIUM
_HRESULT_TYPEDEF_(0x80040066L)
//
// MessageId: DV_E_STATDATA
//
// MessageText:
//
// Invalid STATDATA structure
//
#define
DV_E_STATDATA
_HRESULT_TYPEDEF_(0x80040067L)
//
// MessageId: DV_E_LINDEX
//
// MessageText:
//
// Invalid lindex
//
#define
DV_E_LINDEX
_HRESULT_TYPEDEF_(0x80040068L)
//
// MessageId: DV_E_TYMED
//
// MessageText:
//
// Invalid tymed
//
#define
DV_E_TYMED
_HRESULT_TYPEDEF_(0x80040069L)
//
// MessageId: DV_E_CLIPFORMAT
//
// MessageText:
//
// Invalid clipboard format
//
#define
DV_E_CLIPFORMAT
_HRESULT_TYPEDEF_(0x8004006AL)
//
// MessageId: DV_E_DVASPECT
//
// MessageText:
//
// Invalid aspect(s)
//
#define
DV_E_DVASPECT
_HRESULT_TYPEDEF_(0x8004006BL)
//
// MessageId: DV_E_DVTARGETDEVICE_SIZE
//
// MessageText:
//
// tdSize parameter of the DVTARGETDEVICE structure is invalid
//
#define
DV_E_DVTARGETDEVICE_SIZE
_HRESULT_TYPEDEF_(0x8004006CL)
//
// MessageId: DV_E_NOIVIEWOBJECT
//
// MessageText:
//
// Object doesn't support IViewObject interface
//
#define
DV_E_NOIVIEWOBJECT
_HRESULT_TYPEDEF_(0x8004006DL)
#define
DRAGDROP_E_FIRST 0x80040100L
#define DRAGDROP_E_LAST 0x8004010FL
#define DRAGDROP_S_FIRST 0x00040100L
#define DRAGDROP_S_LAST 0x0004010FL
//
// MessageId: DRAGDROP_E_NOTREGISTERED
//
// MessageText:
//
// Trying to revoke a drop target that has not been registered
//
#define
DRAGDROP_E_NOTREGISTERED
_HRESULT_TYPEDEF_(0x80040100L)
//
// MessageId: DRAGDROP_E_ALREADYREGISTERED
//
// MessageText:
//
// This window has already been registered as a drop target
//
#define
DRAGDROP_E_ALREADYREGISTERED
_HRESULT_TYPEDEF_(0x80040101L)
//
// MessageId: DRAGDROP_E_INVALIDHWND
//
// MessageText:
//
// Invalid window handle
//
#define
DRAGDROP_E_INVALIDHWND
_HRESULT_TYPEDEF_(0x80040102L)
#define
CLASSFACTORY_E_FIRST 0x80040110L
#define CLASSFACTORY_E_LAST 0x8004011FL
#define CLASSFACTORY_S_FIRST 0x00040110L
#define CLASSFACTORY_S_LAST 0x0004011FL
//
// MessageId: CLASS_E_NOAGGREGATION
//
// MessageText:
//
// Class does not support aggregation (or class object is remote)
//
#define
CLASS_E_NOAGGREGATION
_HRESULT_TYPEDEF_(0x80040110L)
//
// MessageId: CLASS_E_CLASSNOTAVAILABLE
//
// MessageText:
//
// ClassFactory cannot supply requested class
//
#define
CLASS_E_CLASSNOTAVAILABLE
_HRESULT_TYPEDEF_(0x80040111L)
//
// MessageId: CLASS_E_NOTLICENSED
//
// MessageText:
//
// Class is not licensed for use
//
#define
CLASS_E_NOTLICENSED
_HRESULT_TYPEDEF_(0x80040112L)
#define
MARSHAL_E_FIRST 0x80040120L
#define MARSHAL_E_LAST 0x8004012FL
#define MARSHAL_S_FIRST 0x00040120L
#define MARSHAL_S_LAST 0x0004012FL
#define DATA_E_FIRST 0x80040130L
#define DATA_E_LAST
0x8004013FL
#define DATA_S_FIRST 0x00040130L
#define DATA_S_LAST
0x0004013FL
#define VIEW_E_FIRST 0x80040140L
#define VIEW_E_LAST
0x8004014FL
#define VIEW_S_FIRST 0x00040140L
#define VIEW_S_LAST
0x0004014FL
//
// MessageId: VIEW_E_DRAW
//
// MessageText:
//
// Error drawing view
//
#define
VIEW_E_DRAW
_HRESULT_TYPEDEF_(0x80040140L)
#define
REGDB_E_FIRST 0x80040150L
#define REGDB_E_LAST
0x8004015FL
#define REGDB_S_FIRST
0x00040150L
#define REGDB_S_LAST
0x0004015FL
//
// MessageId: REGDB_E_READREGDB
//
// MessageText:
//
// Could not read key from registry
//
#define
REGDB_E_READREGDB
_HRESULT_TYPEDEF_(0x80040150L)
//
// MessageId: REGDB_E_WRITEREGDB
//
// MessageText:
//
// Could not write key to registry
//
#define
REGDB_E_WRITEREGDB
_HRESULT_TYPEDEF_(0x80040151L)
//
// MessageId: REGDB_E_KEYMISSING
//
// MessageText:
//
// Could not find the key in the registry
//
#define
REGDB_E_KEYMISSING
_HRESULT_TYPEDEF_(0x80040152L)
//
// MessageId: REGDB_E_INVALIDVALUE
//
// MessageText:
//
// Invalid value for registry
//
#define
REGDB_E_INVALIDVALUE
_HRESULT_TYPEDEF_(0x80040153L)
//
// MessageId: REGDB_E_CLASSNOTREG
//
// MessageText:
//
// Class not registered
//
#define
REGDB_E_CLASSNOTREG
_HRESULT_TYPEDEF_(0x80040154L)
//
// MessageId: REGDB_E_IIDNOTREG
//
// MessageText:
//
// Interface not registered
//
#define
REGDB_E_IIDNOTREG
_HRESULT_TYPEDEF_(0x80040155L)
//
// MessageId: REGDB_E_BADTHREADINGMODEL
//
// MessageText:
//
// Threading model entry is not valid
//
#define
REGDB_E_BADTHREADINGMODEL
_HRESULT_TYPEDEF_(0x80040156L)
#define
CAT_E_FIRST 0x80040160L
#define CAT_E_LAST
0x80040161L
//
// MessageId: CAT_E_CATIDNOEXIST
//
// MessageText:
//
// CATID does not exist
//
#define
CAT_E_CATIDNOEXIST
_HRESULT_TYPEDEF_(0x80040160L)
//
// MessageId: CAT_E_NODESCRIPTION
//
// MessageText:
//
// Description not found
//
#define
CAT_E_NODESCRIPTION
_HRESULT_TYPEDEF_(0x80040161L)
////////////////////////////////////
//
//
// Class Store Error
Codes //
//
//
////////////////////////////////////
#define CS_E_FIRST 0x80040164L
#define CS_E_LAST
0x8004016FL
//
// MessageId: CS_E_PACKAGE_NOTFOUND
//
// MessageText:
//
// No package in the software installation data in the Active Directory
meets this criteria.
//
#define
CS_E_PACKAGE_NOTFOUND
_HRESULT_TYPEDEF_(0x80040164L)
//
// MessageId: CS_E_NOT_DELETABLE
//
// MessageText:
//
// Deleting this will break the referential integrity of the software
installation data in the Active Directory.
//
#define
CS_E_NOT_DELETABLE
_HRESULT_TYPEDEF_(0x80040165L)
//
// MessageId: CS_E_CLASS_NOTFOUND
//
// MessageText:
//
// The CLSID was not found in the software installation data in the
Active Directory.
//
#define
CS_E_CLASS_NOTFOUND
_HRESULT_TYPEDEF_(0x80040166L)
//
// MessageId: CS_E_INVALID_VERSION
//
// MessageText:
//
// The software installation data in the Active Directory is corrupt.
//
#define
CS_E_INVALID_VERSION
_HRESULT_TYPEDEF_(0x80040167L)
//
// MessageId: CS_E_NO_CLASSSTORE
//
// MessageText:
//
// There is no software installation data in the Active Directory.
//
#define
CS_E_NO_CLASSSTORE
_HRESULT_TYPEDEF_(0x80040168L)
//
// MessageId: CS_E_OBJECT_NOTFOUND
//
// MessageText:
//
// There is no software installation data object in the Active
Directory.
//
#define
CS_E_OBJECT_NOTFOUND
_HRESULT_TYPEDEF_(0x80040169L)
//
// MessageId: CS_E_OBJECT_ALREADY_EXISTS
//
// MessageText:
//
// The software installation data object in the Active Directory
already exists.
//
#define
CS_E_OBJECT_ALREADY_EXISTS
_HRESULT_TYPEDEF_(0x8004016AL)
//
// MessageId: CS_E_INVALID_PATH
//
// MessageText:
//
// The path to the software installation data in the Active Directory
is not correct.
//
#define
CS_E_INVALID_PATH
_HRESULT_TYPEDEF_(0x8004016BL)
//
// MessageId: CS_E_NETWORK_ERROR
//
// MessageText:
//
// A network error interrupted the operation.
//
#define
CS_E_NETWORK_ERROR
_HRESULT_TYPEDEF_(0x8004016CL)
//
// MessageId: CS_E_ADMIN_LIMIT_EXCEEDED
//
// MessageText:
//
// The size of this object exceeds the maximum size set by the
Administrator.
//
#define
CS_E_ADMIN_LIMIT_EXCEEDED
_HRESULT_TYPEDEF_(0x8004016DL)
//
// MessageId: CS_E_SCHEMA_MISMATCH
//
// MessageText:
//
// The schema for the software installation data in the Active
Directory does not match the required schema.
//
#define
CS_E_SCHEMA_MISMATCH
_HRESULT_TYPEDEF_(0x8004016EL)
//
// MessageId: CS_E_INTERNAL_ERROR
//
// MessageText:
//
// An error occurred in the software installation data in the Active
Directory.
//
#define
CS_E_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0x8004016FL)
#define
CACHE_E_FIRST 0x80040170L
#define CACHE_E_LAST
0x8004017FL
#define CACHE_S_FIRST
0x00040170L
#define CACHE_S_LAST
0x0004017FL
//
// MessageId: CACHE_E_NOCACHE_UPDATED
//
// MessageText:
//
// Cache not updated
//
#define
CACHE_E_NOCACHE_UPDATED
_HRESULT_TYPEDEF_(0x80040170L)
#define
OLEOBJ_E_FIRST 0x80040180L
#define OLEOBJ_E_LAST
0x8004018FL
#define OLEOBJ_S_FIRST
0x00040180L
#define OLEOBJ_S_LAST
0x0004018FL
//
// MessageId: OLEOBJ_E_NOVERBS
//
// MessageText:
//
// No verbs for OLE object
//
#define
OLEOBJ_E_NOVERBS
_HRESULT_TYPEDEF_(0x80040180L)
//
// MessageId: OLEOBJ_E_INVALIDVERB
//
// MessageText:
//
// Invalid verb for OLE object
//
#define
OLEOBJ_E_INVALIDVERB
_HRESULT_TYPEDEF_(0x80040181L)
#define
CLIENTSITE_E_FIRST 0x80040190L
#define
CLIENTSITE_E_LAST
0x8004019FL
#define CLIENTSITE_S_FIRST
0x00040190L
#define
CLIENTSITE_S_LAST
0x0004019FL
//
// MessageId: INPLACE_E_NOTUNDOABLE
//
// MessageText:
//
// Undo is not available
//
#define
INPLACE_E_NOTUNDOABLE
_HRESULT_TYPEDEF_(0x800401A0L)
//
// MessageId: INPLACE_E_NOTOOLSPACE
//
// MessageText:
//
// Space for tools is not available
//
#define
INPLACE_E_NOTOOLSPACE
_HRESULT_TYPEDEF_(0x800401A1L)
#define
INPLACE_E_FIRST 0x800401A0L
#define
INPLACE_E_LAST
0x800401AFL
#define INPLACE_S_FIRST
0x000401A0L
#define
INPLACE_S_LAST
0x000401AFL
#define
ENUM_E_FIRST
0x800401B0L
#define
ENUM_E_LAST
0x800401BFL
#define
ENUM_S_FIRST
0x000401B0L
#define
ENUM_S_LAST
0x000401BFL
#define
CONVERT10_E_FIRST
0x800401C0L
#define
CONVERT10_E_LAST
0x800401CFL
#define
CONVERT10_S_FIRST
0x000401C0L
#define
CONVERT10_S_LAST
0x000401CFL
//
// MessageId: CONVERT10_E_OLESTREAM_GET
//
// MessageText:
//
// OLESTREAM Get method failed
//
#define
CONVERT10_E_OLESTREAM_GET
_HRESULT_TYPEDEF_(0x800401C0L)
//
// MessageId: CONVERT10_E_OLESTREAM_PUT
//
// MessageText:
//
// OLESTREAM Put method failed
//
#define
CONVERT10_E_OLESTREAM_PUT
_HRESULT_TYPEDEF_(0x800401C1L)
//
// MessageId: CONVERT10_E_OLESTREAM_FMT
//
// MessageText:
//
// Contents of the OLESTREAM not in correct format
//
#define
CONVERT10_E_OLESTREAM_FMT
_HRESULT_TYPEDEF_(0x800401C2L)
//
// MessageId: CONVERT10_E_OLESTREAM_BITMAP_TO_DIB
//
// MessageText:
//
// There was an error in a Windows GDI call while converting the bitmap
to a DIB
//
#define CONVERT10_E_OLESTREAM_BITMAP_TO_DIB
_HRESULT_TYPEDEF_(0x800401C3L)
//
// MessageId: CONVERT10_E_STG_FMT
//
// MessageText:
//
// Contents of the IStorage not in correct format
//
#define
CONVERT10_E_STG_FMT
_HRESULT_TYPEDEF_(0x800401C4L)
//
// MessageId: CONVERT10_E_STG_NO_STD_STREAM
//
// MessageText:
//
// Contents of IStorage is missing one of the standard streams
//
#define CONVERT10_E_STG_NO_STD_STREAM
_HRESULT_TYPEDEF_(0x800401C5L)
//
// MessageId: CONVERT10_E_STG_DIB_TO_BITMAP
//
// MessageText:
//
// There was an error in a Windows GDI call while converting the DIB to
a bitmap.
//
#define CONVERT10_E_STG_DIB_TO_BITMAP
_HRESULT_TYPEDEF_(0x800401C6L)
#define
CLIPBRD_E_FIRST
0x800401D0L
#define
CLIPBRD_E_LAST
0x800401DFL
#define
CLIPBRD_S_FIRST
0x000401D0L
#define
CLIPBRD_S_LAST
0x000401DFL
//
// MessageId: CLIPBRD_E_CANT_OPEN
//
// MessageText:
//
// OpenClipboard Failed
//
#define
CLIPBRD_E_CANT_OPEN
_HRESULT_TYPEDEF_(0x800401D0L)
//
// MessageId: CLIPBRD_E_CANT_EMPTY
//
// MessageText:
//
// EmptyClipboard Failed
//
#define
CLIPBRD_E_CANT_EMPTY
_HRESULT_TYPEDEF_(0x800401D1L)
//
// MessageId: CLIPBRD_E_CANT_SET
//
// MessageText:
//
// SetClipboard Failed
//
#define
CLIPBRD_E_CANT_SET
_HRESULT_TYPEDEF_(0x800401D2L)
//
// MessageId: CLIPBRD_E_BAD_DATA
//
// MessageText:
//
// Data on clipboard is invalid
//
#define
CLIPBRD_E_BAD_DATA
_HRESULT_TYPEDEF_(0x800401D3L)
//
// MessageId: CLIPBRD_E_CANT_CLOSE
//
// MessageText:
//
// CloseClipboard Failed
//
#define
CLIPBRD_E_CANT_CLOSE
_HRESULT_TYPEDEF_(0x800401D4L)
#define
MK_E_FIRST
0x800401E0L
#define
MK_E_LAST
0x800401EFL
#define
MK_S_FIRST
0x000401E0L
#define
MK_S_LAST
0x000401EFL
//
// MessageId: MK_E_CONNECTMANUALLY
//
// MessageText:
//
// Moniker needs to be connected manually
//
#define
MK_E_CONNECTMANUALLY
_HRESULT_TYPEDEF_(0x800401E0L)
//
// MessageId: MK_E_EXCEEDEDDEADLINE
//
// MessageText:
//
// Operation exceeded deadline
//
#define
MK_E_EXCEEDEDDEADLINE
_HRESULT_TYPEDEF_(0x800401E1L)
//
// MessageId: MK_E_NEEDGENERIC
//
// MessageText:
//
// Moniker needs to be generic
//
#define
MK_E_NEEDGENERIC
_HRESULT_TYPEDEF_(0x800401E2L)
//
// MessageId: MK_E_UNAVAILABLE
//
// MessageText:
//
// Operation unavailable
//
#define
MK_E_UNAVAILABLE
_HRESULT_TYPEDEF_(0x800401E3L)
//
// MessageId: MK_E_SYNTAX
//
// MessageText:
//
// Invalid syntax
//
#define
MK_E_SYNTAX
_HRESULT_TYPEDEF_(0x800401E4L)
//
// MessageId: MK_E_NOOBJECT
//
// MessageText:
//
// No object for moniker
//
#define
MK_E_NOOBJECT
_HRESULT_TYPEDEF_(0x800401E5L)
//
// MessageId: MK_E_INVALIDEXTENSION
//
// MessageText:
//
// Bad extension for file
//
#define
MK_E_INVALIDEXTENSION
_HRESULT_TYPEDEF_(0x800401E6L)
//
// MessageId: MK_E_INTERMEDIATEINTERFACENOTSUPPORTED
//
// MessageText:
//
// Intermediate operation failed
//
#define MK_E_INTERMEDIATEINTERFACENOTSUPPORTED
_HRESULT_TYPEDEF_(0x800401E7L)
//
// MessageId: MK_E_NOTBINDABLE
//
// MessageText:
//
// Moniker is not bindable
//
#define
MK_E_NOTBINDABLE
_HRESULT_TYPEDEF_(0x800401E8L)
//
// MessageId: MK_E_NOTBOUND
//
// MessageText:
//
// Moniker is not bound
//
#define
MK_E_NOTBOUND
_HRESULT_TYPEDEF_(0x800401E9L)
//
// MessageId: MK_E_CANTOPENFILE
//
// MessageText:
//
// Moniker cannot open file
//
#define
MK_E_CANTOPENFILE
_HRESULT_TYPEDEF_(0x800401EAL)
//
// MessageId: MK_E_MUSTBOTHERUSER
//
// MessageText:
//
// User input required for operation to succeed
//
#define
MK_E_MUSTBOTHERUSER
_HRESULT_TYPEDEF_(0x800401EBL)
//
// MessageId: MK_E_NOINVERSE
//
// MessageText:
//
// Moniker class has no inverse
//
#define
MK_E_NOINVERSE
_HRESULT_TYPEDEF_(0x800401ECL)
//
// MessageId: MK_E_NOSTORAGE
//
// MessageText:
//
// Moniker does not refer to storage
//
#define
MK_E_NOSTORAGE
_HRESULT_TYPEDEF_(0x800401EDL)
//
// MessageId: MK_E_NOPREFIX
//
// MessageText:
//
// No common prefix
//
#define
MK_E_NOPREFIX
_HRESULT_TYPEDEF_(0x800401EEL)
//
// MessageId: MK_E_ENUMERATION_FAILED
//
// MessageText:
//
// Moniker could not be enumerated
//
#define
MK_E_ENUMERATION_FAILED
_HRESULT_TYPEDEF_(0x800401EFL)
#define
CO_E_FIRST
0x800401F0L
#define
CO_E_LAST
0x800401FFL
#define
CO_S_FIRST
0x000401F0L
#define
CO_S_LAST
0x000401FFL
//
// MessageId: CO_E_NOTINITIALIZED
//
// MessageText:
//
// CoInitialize has not been called.
//
#define
CO_E_NOTINITIALIZED
_HRESULT_TYPEDEF_(0x800401F0L)
//
// MessageId: CO_E_ALREADYINITIALIZED
//
// MessageText:
//
// CoInitialize has already been called.
//
#define
CO_E_ALREADYINITIALIZED
_HRESULT_TYPEDEF_(0x800401F1L)
//
// MessageId: CO_E_CANTDETERMINECLASS
//
// MessageText:
//
// Class of object cannot be determined
//
#define
CO_E_CANTDETERMINECLASS
_HRESULT_TYPEDEF_(0x800401F2L)
//
// MessageId: CO_E_CLASSSTRING
//
// MessageText:
//
// Invalid class string
//
#define
CO_E_CLASSSTRING
_HRESULT_TYPEDEF_(0x800401F3L)
//
// MessageId: CO_E_IIDSTRING
//
// MessageText:
//
// Invalid interface string
//
#define
CO_E_IIDSTRING
_HRESULT_TYPEDEF_(0x800401F4L)
//
// MessageId: CO_E_APPNOTFOUND
//
// MessageText:
//
// Application not found
//
#define
CO_E_APPNOTFOUND
_HRESULT_TYPEDEF_(0x800401F5L)
//
// MessageId: CO_E_APPSINGLEUSE
//
// MessageText:
//
// Application cannot be run more than once
//
#define
CO_E_APPSINGLEUSE
_HRESULT_TYPEDEF_(0x800401F6L)
//
// MessageId: CO_E_ERRORINAPP
//
// MessageText:
//
// Some error in application program
//
#define
CO_E_ERRORINAPP
_HRESULT_TYPEDEF_(0x800401F7L)
//
// MessageId: CO_E_DLLNOTFOUND
//
// MessageText:
//
// DLL for class not found
//
#define
CO_E_DLLNOTFOUND
_HRESULT_TYPEDEF_(0x800401F8L)
//
// MessageId: CO_E_ERRORINDLL
//
// MessageText:
//
// Error in the DLL
//
#define
CO_E_ERRORINDLL
_HRESULT_TYPEDEF_(0x800401F9L)
//
// MessageId: CO_E_WRONGOSFORAPP
//
// MessageText:
//
// Wrong OS or OS version for application
//
#define
CO_E_WRONGOSFORAPP
_HRESULT_TYPEDEF_(0x800401FAL)
//
// MessageId: CO_E_OBJNOTREG
//
// MessageText:
//
// Object is not registered
//
#define
CO_E_OBJNOTREG
_HRESULT_TYPEDEF_(0x800401FBL)
//
// MessageId: CO_E_OBJISREG
//
// MessageText:
//
// Object is already registered
//
#define
CO_E_OBJISREG
_HRESULT_TYPEDEF_(0x800401FCL)
//
// MessageId: CO_E_OBJNOTCONNECTED
//
// MessageText:
//
// Object is not connected to server
//
#define
CO_E_OBJNOTCONNECTED
_HRESULT_TYPEDEF_(0x800401FDL)
//
// MessageId: CO_E_APPDIDNTREG
//
// MessageText:
//
// Application was launched but it didn't register a class factory
//
#define
CO_E_APPDIDNTREG
_HRESULT_TYPEDEF_(0x800401FEL)
//
// MessageId: CO_E_RELEASED
//
// MessageText:
//
// Object has been released
//
#define
CO_E_RELEASED
_HRESULT_TYPEDEF_(0x800401FFL)
#define
EVENT_E_FIRST
0x80040200L
#define
EVENT_E_LAST
0x8004021FL
#define
EVENT_S_FIRST
0x00040200L
#define
EVENT_S_LAST
0x0004021FL
//
// MessageId: EVENT_S_SOME_SUBSCRIBERS_FAILED
//
// MessageText:
//
// An event was able to invoke some but not all of the subscribers
//
#define EVENT_S_SOME_SUBSCRIBERS_FAILED
_HRESULT_TYPEDEF_(0x00040200L)
//
// MessageId: EVENT_E_ALL_SUBSCRIBERS_FAILED
//
// MessageText:
//
// An event was unable to invoke any of the subscribers
//
#define EVENT_E_ALL_SUBSCRIBERS_FAILED
_HRESULT_TYPEDEF_(0x80040201L)
//
// MessageId: EVENT_S_NOSUBSCRIBERS
//
// MessageText:
//
// An event was delivered but there were no subscribers
//
#define
EVENT_S_NOSUBSCRIBERS
_HRESULT_TYPEDEF_(0x00040202L)
//
// MessageId: EVENT_E_QUERYSYNTAX
//
// MessageText:
//
// A syntax error occurred trying to evaluate a query string
//
#define
EVENT_E_QUERYSYNTAX
_HRESULT_TYPEDEF_(0x80040203L)
//
// MessageId: EVENT_E_QUERYFIELD
//
// MessageText:
//
// An invalid field name was used in a query string
//
#define
EVENT_E_QUERYFIELD
_HRESULT_TYPEDEF_(0x80040204L)
//
// MessageId: EVENT_E_INTERNALEXCEPTION
//
// MessageText:
//
// An unexpected exception was raised
//
#define
EVENT_E_INTERNALEXCEPTION
_HRESULT_TYPEDEF_(0x80040205L)
//
// MessageId: EVENT_E_INTERNALERROR
//
// MessageText:
//
// An unexpected internal error was detected
//
#define
EVENT_E_INTERNALERROR
_HRESULT_TYPEDEF_(0x80040206L)
//
// MessageId: EVENT_E_INVALID_PER_USER_SID
//
// MessageText:
//
// The owner SID on a per-user subscription doesn't exist
//
#define
EVENT_E_INVALID_PER_USER_SID
_HRESULT_TYPEDEF_(0x80040207L)
//
// MessageId: EVENT_E_USER_EXCEPTION
//
// MessageText:
//
// A user-supplied component or subscriber raised an exception
//
#define
EVENT_E_USER_EXCEPTION
_HRESULT_TYPEDEF_(0x80040208L)
//
// MessageId: EVENT_E_TOO_MANY_METHODS
//
// MessageText:
//
// An interface has too many methods to fire events from
//
#define
EVENT_E_TOO_MANY_METHODS
_HRESULT_TYPEDEF_(0x80040209L)
//
// MessageId: EVENT_E_MISSING_EVENTCLASS
//
// MessageText:
//
// A subscription cannot be stored unless its event class already exists
//
#define
EVENT_E_MISSING_EVENTCLASS
_HRESULT_TYPEDEF_(0x8004020AL)
//
// MessageId: EVENT_E_NOT_ALL_REMOVED
//
// MessageText:
//
// Not all the objects requested could be removed
//
#define
EVENT_E_NOT_ALL_REMOVED
_HRESULT_TYPEDEF_(0x8004020BL)
//
// MessageId: EVENT_E_COMPLUS_NOT_INSTALLED
//
// MessageText:
//
// COM+ is required for this operation, but is not installed
//
#define EVENT_E_COMPLUS_NOT_INSTALLED
_HRESULT_TYPEDEF_(0x8004020CL)
//
// MessageId: EVENT_E_CANT_MODIFY_OR_DELETE_UNCONFIGURED_OBJECT
//
// MessageText:
//
// Cannot modify or delete an object that was not added using the COM+
Admin SDK
//
#define EVENT_E_CANT_MODIFY_OR_DELETE_UNCONFIGURED_OBJECT
_HRESULT_TYPEDEF_(0x8004020DL)
//
// MessageId: EVENT_E_CANT_MODIFY_OR_DELETE_CONFIGURED_OBJECT
//
// MessageText:
//
// Cannot modify or delete an object that was added using the COM+
Admin SDK
//
#define EVENT_E_CANT_MODIFY_OR_DELETE_CONFIGURED_OBJECT
_HRESULT_TYPEDEF_(0x8004020EL)
//
// MessageId: EVENT_E_INVALID_EVENT_CLASS_PARTITION
//
// MessageText:
//
// The event class for this subscription is in an invalid partition
//
#define EVENT_E_INVALID_EVENT_CLASS_PARTITION
_HRESULT_TYPEDEF_(0x8004020FL)
//
// MessageId: EVENT_E_PER_USER_SID_NOT_LOGGED_ON
//
// MessageText:
//
// The owner of the PerUser subscription is not logged on to the system
specified
//
#define EVENT_E_PER_USER_SID_NOT_LOGGED_ON
_HRESULT_TYPEDEF_(0x80040210L)
#define
XACT_E_FIRST 0x8004D000
#define XACT_E_LAST 0x8004D02B
#define XACT_S_FIRST 0x0004D000
#define XACT_S_LAST 0x0004D010
//
// MessageId: XACT_E_ALREADYOTHERSINGLEPHASE
//
// MessageText:
//
// Another single phase resource manager has already been enlisted in
this transaction.
//
#define XACT_E_ALREADYOTHERSINGLEPHASE
_HRESULT_TYPEDEF_(0x8004D000L)
//
// MessageId: XACT_E_CANTRETAIN
//
// MessageText:
//
// A retaining commit or abort is not supported
//
#define
XACT_E_CANTRETAIN
_HRESULT_TYPEDEF_(0x8004D001L)
//
// MessageId: XACT_E_COMMITFAILED
//
// MessageText:
//
// The transaction failed to commit for an unknown reason. The
transaction was aborted.
//
#define
XACT_E_COMMITFAILED
_HRESULT_TYPEDEF_(0x8004D002L)
//
// MessageId: XACT_E_COMMITPREVENTED
//
// MessageText:
//
// Cannot call commit on this transaction object because the calling
application did not initiate the transaction.
//
#define
XACT_E_COMMITPREVENTED
_HRESULT_TYPEDEF_(0x8004D003L)
//
// MessageId: XACT_E_HEURISTICABORT
//
// MessageText:
//
// Instead of committing, the resource heuristically aborted.
//
#define
XACT_E_HEURISTICABORT
_HRESULT_TYPEDEF_(0x8004D004L)
//
// MessageId: XACT_E_HEURISTICCOMMIT
//
// MessageText:
//
// Instead of aborting, the resource heuristically committed.
//
#define
XACT_E_HEURISTICCOMMIT
_HRESULT_TYPEDEF_(0x8004D005L)
//
// MessageId: XACT_E_HEURISTICDAMAGE
//
// MessageText:
//
// Some of the states of the resource were committed while others were
aborted, likely because of heuristic decisions.
//
#define
XACT_E_HEURISTICDAMAGE
_HRESULT_TYPEDEF_(0x8004D006L)
//
// MessageId: XACT_E_HEURISTICDANGER
//
// MessageText:
//
//
Some of the states of the resource may have been committed while others
may have been aborted, likely because of heuristic decisions.
//
#define
XACT_E_HEURISTICDANGER
_HRESULT_TYPEDEF_(0x8004D007L)
//
// MessageId: XACT_E_ISOLATIONLEVEL
//
// MessageText:
//
// The requested isolation level is not valid or supported.
//
#define
XACT_E_ISOLATIONLEVEL
_HRESULT_TYPEDEF_(0x8004D008L)
//
// MessageId: XACT_E_NOASYNC
//
// MessageText:
//
// The transaction manager doesn't support an asynchronous operation
for this method.
//
#define
XACT_E_NOASYNC
_HRESULT_TYPEDEF_(0x8004D009L)
//
// MessageId: XACT_E_NOENLIST
//
// MessageText:
//
// Unable to enlist in the transaction.
//
#define
XACT_E_NOENLIST
_HRESULT_TYPEDEF_(0x8004D00AL)
//
// MessageId: XACT_E_NOISORETAIN
//
// MessageText:
//
//
The requested semantics of retention of isolation across retaining
commit and abort boundaries cannot be supported by this transaction
implementation, or isoFlags was not equal to zero.
//
#define
XACT_E_NOISORETAIN
_HRESULT_TYPEDEF_(0x8004D00BL)
//
// MessageId: XACT_E_NORESOURCE
//
// MessageText:
//
// There is no resource presently associated with this enlistment
//
#define
XACT_E_NORESOURCE
_HRESULT_TYPEDEF_(0x8004D00CL)
//
// MessageId: XACT_E_NOTCURRENT
//
// MessageText:
//
//
The transaction failed to commit due to the failure of optimistic
concurrency control in at least one of the resource managers.
//
#define
XACT_E_NOTCURRENT
_HRESULT_TYPEDEF_(0x8004D00DL)
//
// MessageId: XACT_E_NOTRANSACTION
//
// MessageText:
//
// The transaction has already been implicitly or explicitly committed
or aborted
//
#define
XACT_E_NOTRANSACTION
_HRESULT_TYPEDEF_(0x8004D00EL)
//
// MessageId: XACT_E_NOTSUPPORTED
//
// MessageText:
//
// An invalid combination of flags was specified
//
#define
XACT_E_NOTSUPPORTED
_HRESULT_TYPEDEF_(0x8004D00FL)
//
// MessageId: XACT_E_UNKNOWNRMGRID
//
// MessageText:
//
// The resource manager id is not associated with this transaction or
the transaction manager.
//
#define
XACT_E_UNKNOWNRMGRID
_HRESULT_TYPEDEF_(0x8004D010L)
//
// MessageId: XACT_E_WRONGSTATE
//
// MessageText:
//
// This method was called in the wrong state
//
#define
XACT_E_WRONGSTATE
_HRESULT_TYPEDEF_(0x8004D011L)
//
// MessageId: XACT_E_WRONGUOW
//
// MessageText:
//
// The indicated unit of work does not match the unit of work expected
by the resource manager.
//
#define
XACT_E_WRONGUOW
_HRESULT_TYPEDEF_(0x8004D012L)
//
// MessageId: XACT_E_XTIONEXISTS
//
// MessageText:
//
// An enlistment in a transaction already exists.
//
#define
XACT_E_XTIONEXISTS
_HRESULT_TYPEDEF_(0x8004D013L)
//
// MessageId: XACT_E_NOIMPORTOBJECT
//
// MessageText:
//
// An import object for the transaction could not be found.
//
#define
XACT_E_NOIMPORTOBJECT
_HRESULT_TYPEDEF_(0x8004D014L)
//
// MessageId: XACT_E_INVALIDCOOKIE
//
// MessageText:
//
// The transaction cookie is invalid.
//
#define
XACT_E_INVALIDCOOKIE
_HRESULT_TYPEDEF_(0x8004D015L)
//
// MessageId: XACT_E_INDOUBT
//
// MessageText:
//
// The transaction status is in doubt. A communication failure
occurred, or a transaction manager or resource manager has failed
//
#define
XACT_E_INDOUBT
_HRESULT_TYPEDEF_(0x8004D016L)
//
// MessageId: XACT_E_NOTIMEOUT
//
// MessageText:
//
// A time-out was specified, but time-outs are not supported.
//
#define
XACT_E_NOTIMEOUT
_HRESULT_TYPEDEF_(0x8004D017L)
//
// MessageId: XACT_E_ALREADYINPROGRESS
//
// MessageText:
//
// The requested operation is already in progress for the transaction.
//
#define
XACT_E_ALREADYINPROGRESS
_HRESULT_TYPEDEF_(0x8004D018L)
//
// MessageId: XACT_E_ABORTED
//
// MessageText:
//
// The transaction has already been aborted.
//
#define
XACT_E_ABORTED
_HRESULT_TYPEDEF_(0x8004D019L)
//
// MessageId: XACT_E_LOGFULL
//
// MessageText:
//
// The Transaction Manager returned a log full error.
//
#define
XACT_E_LOGFULL
_HRESULT_TYPEDEF_(0x8004D01AL)
//
// MessageId: XACT_E_TMNOTAVAILABLE
//
// MessageText:
//
// The Transaction Manager is not available.
//
#define
XACT_E_TMNOTAVAILABLE
_HRESULT_TYPEDEF_(0x8004D01BL)
//
// MessageId: XACT_E_CONNECTION_DOWN
//
// MessageText:
//
// A connection with the transaction manager was lost.
//
#define
XACT_E_CONNECTION_DOWN
_HRESULT_TYPEDEF_(0x8004D01CL)
//
// MessageId: XACT_E_CONNECTION_DENIED
//
// MessageText:
//
// A request to establish a connection with the transaction manager was
denied.
//
#define
XACT_E_CONNECTION_DENIED
_HRESULT_TYPEDEF_(0x8004D01DL)
//
// MessageId: XACT_E_REENLISTTIMEOUT
//
// MessageText:
//
// Resource manager reenlistment to determine transaction status timed
out.
//
#define
XACT_E_REENLISTTIMEOUT
_HRESULT_TYPEDEF_(0x8004D01EL)
//
// MessageId: XACT_E_TIP_CONNECT_FAILED
//
// MessageText:
//
// This transaction manager failed to establish a connection with
another TIP transaction manager.
//
#define
XACT_E_TIP_CONNECT_FAILED
_HRESULT_TYPEDEF_(0x8004D01FL)
//
// MessageId: XACT_E_TIP_PROTOCOL_ERROR
//
// MessageText:
//
// This transaction manager encountered a protocol error with another
TIP transaction manager.
//
#define
XACT_E_TIP_PROTOCOL_ERROR
_HRESULT_TYPEDEF_(0x8004D020L)
//
// MessageId: XACT_E_TIP_PULL_FAILED
//
// MessageText:
//
// This transaction manager could not propagate a transaction from
another TIP transaction manager.
//
#define
XACT_E_TIP_PULL_FAILED
_HRESULT_TYPEDEF_(0x8004D021L)
//
// MessageId: XACT_E_DEST_TMNOTAVAILABLE
//
// MessageText:
//
// The Transaction Manager on the destination machine is not available.
//
#define
XACT_E_DEST_TMNOTAVAILABLE
_HRESULT_TYPEDEF_(0x8004D022L)
//
// MessageId: XACT_E_TIP_DISABLED
//
// MessageText:
//
// The Transaction Manager has disabled its support for TIP.
//
#define
XACT_E_TIP_DISABLED
_HRESULT_TYPEDEF_(0x8004D023L)
//
// MessageId: XACT_E_NETWORK_TX_DISABLED
//
// MessageText:
//
// The transaction manager has disabled its support for remote/network
transactions.
//
#define
XACT_E_NETWORK_TX_DISABLED
_HRESULT_TYPEDEF_(0x8004D024L)
//
// MessageId: XACT_E_PARTNER_NETWORK_TX_DISABLED
//
// MessageText:
//
// The partner transaction manager has disabled its support for
remote/network transactions.
//
#define XACT_E_PARTNER_NETWORK_TX_DISABLED
_HRESULT_TYPEDEF_(0x8004D025L)
//
// MessageId: XACT_E_XA_TX_DISABLED
//
// MessageText:
//
// The transaction manager has disabled its support for XA transactions.
//
#define
XACT_E_XA_TX_DISABLED
_HRESULT_TYPEDEF_(0x8004D026L)
//
// MessageId: XACT_E_UNABLE_TO_READ_DTC_CONFIG
//
// MessageText:
//
// MSDTC was unable to read its configuration information.
//
#define XACT_E_UNABLE_TO_READ_DTC_CONFIG _HRESULT_TYPEDEF_(0x8004D027L)
//
// MessageId: XACT_E_UNABLE_TO_LOAD_DTC_PROXY
//
// MessageText:
//
// MSDTC was unable to load the dtc proxy dll.
//
#define XACT_E_UNABLE_TO_LOAD_DTC_PROXY
_HRESULT_TYPEDEF_(0x8004D028L)
//
// MessageId: XACT_E_ABORTING
//
// MessageText:
//
// The local transaction has aborted.
//
#define
XACT_E_ABORTING
_HRESULT_TYPEDEF_(0x8004D029L)
//
// MessageId: XACT_E_PUSH_COMM_FAILURE
//
// MessageText:
//
//
The MSDTC transaction manager was unable to push the transaction to the
destination transaction manager due to communication problems. Possible
causes are: a firewall is present and it doesn't have an exception for
the MSDTC process, the two machines cannot find each other by their
NetBIOS names, or the support for network transactions is not enabled
for one of the two transaction managers.
//
#define
XACT_E_PUSH_COMM_FAILURE
_HRESULT_TYPEDEF_(0x8004D02AL)
//
// MessageId: XACT_E_PULL_COMM_FAILURE
//
// MessageText:
//
//
The MSDTC transaction manager was unable to pull the transaction from
the source transaction manager due to communication problems. Possible
causes are: a firewall is present and it doesn't have an exception for
the MSDTC process, the two machines cannot find each other by their
NetBIOS names, or the support for network transactions is not enabled
for one of the two transaction managers.
//
#define
XACT_E_PULL_COMM_FAILURE
_HRESULT_TYPEDEF_(0x8004D02BL)
//
// MessageId: XACT_E_LU_TX_DISABLED
//
// MessageText:
//
// The MSDTC transaction manager has disabled its support for SNA LU
6.2 transactions.
//
#define
XACT_E_LU_TX_DISABLED
_HRESULT_TYPEDEF_(0x8004D02CL)
//
// TXF & CRM errors start 4d080.
//
// MessageId: XACT_E_CLERKNOTFOUND
//
// MessageText:
//
// XACT_E_CLERKNOTFOUND
//
#define
XACT_E_CLERKNOTFOUND
_HRESULT_TYPEDEF_(0x8004D080L)
//
// MessageId: XACT_E_CLERKEXISTS
//
// MessageText:
//
// XACT_E_CLERKEXISTS
//
#define
XACT_E_CLERKEXISTS
_HRESULT_TYPEDEF_(0x8004D081L)
//
// MessageId: XACT_E_RECOVERYINPROGRESS
//
// MessageText:
//
// XACT_E_RECOVERYINPROGRESS
//
#define
XACT_E_RECOVERYINPROGRESS
_HRESULT_TYPEDEF_(0x8004D082L)
//
// MessageId: XACT_E_TRANSACTIONCLOSED
//
// MessageText:
//
// XACT_E_TRANSACTIONCLOSED
//
#define
XACT_E_TRANSACTIONCLOSED
_HRESULT_TYPEDEF_(0x8004D083L)
//
// MessageId: XACT_E_INVALIDLSN
//
// MessageText:
//
// XACT_E_INVALIDLSN
//
#define
XACT_E_INVALIDLSN
_HRESULT_TYPEDEF_(0x8004D084L)
//
// MessageId: XACT_E_REPLAYREQUEST
//
// MessageText:
//
// XACT_E_REPLAYREQUEST
//
#define
XACT_E_REPLAYREQUEST
_HRESULT_TYPEDEF_(0x8004D085L)
// Begin XACT_DTC_CONSTANTS enumerated values defined in txdtc.h
//
SymbolicName=XACT_E_CONNECTION_REQUEST_DENIED
//
// MessageId: 0x8004D100L (No symbolic name defined)
//
// MessageText:
//
// The request to connect to the specified transaction coordinator was
denied.
//
// SymbolicName=XACT_E_TOOMANY_ENLISTMENTS
//
// MessageId: 0x8004D101L (No symbolic name defined)
//
// MessageText:
//
// The maximum number of enlistments for the specified transaction has
been reached.
//
// SymbolicName=XACT_E_DUPLICATE_GUID
//
// MessageId: 0x8004D102L (No symbolic name defined)
//
// MessageText:
//
// A resource manager with the same identifier is already registered
with the specified transaction coordinator.
//
// SymbolicName=XACT_E_NOTSINGLEPHASE
//
// MessageId: 0x8004D103L (No symbolic name defined)
//
// MessageText:
//
// The prepare request given was not eligible for single phase
optimizations.
//
// SymbolicName=XACT_E_RECOVERYALREADYDONE
//
// MessageId: 0x8004D104L (No symbolic name defined)
//
// MessageText:
//
// RecoveryComplete has already been called for the given resource
manager.
//
// SymbolicName=XACT_E_PROTOCOL
//
// MessageId: 0x8004D105L (No symbolic name defined)
//
// MessageText:
//
// The interface call made was incorrect for the current state of the
protocol.
//
// SymbolicName=XACT_E_RM_FAILURE
//
// MessageId: 0x8004D106L (No symbolic name defined)
//
// MessageText:
//
// xa_open call failed for the XA resource.
//
// SymbolicName=XACT_E_RECOVERY_FAILED
//
// MessageId: 0x8004D107L (No symbolic name defined)
//
// MessageText:
//
// xa_recover call failed for the XA resource.
//
// SymbolicName=XACT_E_LU_NOT_FOUND
//
// MessageId: 0x8004D108L (No symbolic name defined)
//
// MessageText:
//
// The Logical Unit of Work specified cannot be found.
//
// SymbolicName=XACT_E_DUPLICATE_LU
//
// MessageId: 0x8004D109L (No symbolic name defined)
//
// MessageText:
//
// The specified Logical Unit of Work already exists.
//
// SymbolicName=XACT_E_LU_NOT_CONNECTED
//
// MessageId: 0x8004D10AL (No symbolic name defined)
//
// MessageText:
//
// Subordinate creation failed. The specified Logical Unit of Work was
not connected.
//
// SymbolicName=XACT_E_DUPLICATE_TRANSID
//
// MessageId: 0x8004D10BL (No symbolic name defined)
//
// MessageText:
//
// A transaction with the given identifier already exists.
//
// SymbolicName=XACT_E_LU_BUSY
//
// MessageId: 0x8004D10CL (No symbolic name defined)
//
// MessageText:
//
// The resource is in use.
//
// SymbolicName=XACT_E_LU_NO_RECOVERY_PROCESS
//
// MessageId: 0x8004D10DL (No symbolic name defined)
//
// MessageText:
//
// The LU Recovery process is down.
//
// SymbolicName=XACT_E_LU_DOWN
//
// MessageId: 0x8004D10EL (No symbolic name defined)
//
// MessageText:
//
// The remote session was lost.
//
// SymbolicName=XACT_E_LU_RECOVERING
//
// MessageId: 0x8004D10FL (No symbolic name defined)
//
// MessageText:
//
// The resource is currently recovering.
//
// SymbolicName=XACT_E_LU_RECOVERY_MISMATCH
//
// MessageId: 0x8004D110L (No symbolic name defined)
//
// MessageText:
//
// There was a mismatch in driving recovery.
//
// SymbolicName=XACT_E_RM_UNAVAILABLE
//
// MessageId: 0x8004D111L (No symbolic name defined)
//
// MessageText:
//
// An error occurred with the XA resource.
//
// End XACT_DTC_CONSTANTS enumerated values defined in txdtc.h
//
// OleTx Success codes.
//
//
// MessageId: XACT_S_ASYNC
//
// MessageText:
//
// An asynchronous operation was specified. The operation has begun,
but its outcome is not known yet.
//
#define
XACT_S_ASYNC
_HRESULT_TYPEDEF_(0x0004D000L)
//
// MessageId: XACT_S_DEFECT
//
// MessageText:
//
// XACT_S_DEFECT
//
#define
XACT_S_DEFECT
_HRESULT_TYPEDEF_(0x0004D001L)
//
// MessageId: XACT_S_READONLY
//
// MessageText:
//
// The method call succeeded because the transaction was read-only.
//
#define
XACT_S_READONLY
_HRESULT_TYPEDEF_(0x0004D002L)
//
// MessageId: XACT_S_SOMENORETAIN
//
// MessageText:
//
//
The transaction was successfully aborted. However, this is a
coordinated transaction, and some number of enlisted resources were
aborted outright because they could not support abort-retaining
semantics
//
#define
XACT_S_SOMENORETAIN
_HRESULT_TYPEDEF_(0x0004D003L)
//
// MessageId: XACT_S_OKINFORM
//
// MessageText:
//
// No changes were made during this call, but the sink wants another
chance to look if any other sinks make further changes.
//
#define
XACT_S_OKINFORM
_HRESULT_TYPEDEF_(0x0004D004L)
//
// MessageId: XACT_S_MADECHANGESCONTENT
//
// MessageText:
//
// The sink is content and wishes the transaction to proceed. Changes
were made to one or more resources during this call.
//
#define
XACT_S_MADECHANGESCONTENT
_HRESULT_TYPEDEF_(0x0004D005L)
//
// MessageId: XACT_S_MADECHANGESINFORM
//
// MessageText:
//
//
The sink is for the moment and wishes the transaction to proceed, but
if other changes are made following this return by other event sinks
then this sink wants another chance to look
//
#define
XACT_S_MADECHANGESINFORM
_HRESULT_TYPEDEF_(0x0004D006L)
//
// MessageId: XACT_S_ALLNORETAIN
//
// MessageText:
//
// The transaction was successfully aborted. However, the abort was
non-retaining.
//
#define
XACT_S_ALLNORETAIN
_HRESULT_TYPEDEF_(0x0004D007L)
//
// MessageId: XACT_S_ABORTING
//
// MessageText:
//
// An abort operation was already in progress.
//
#define
XACT_S_ABORTING
_HRESULT_TYPEDEF_(0x0004D008L)
//
// MessageId: XACT_S_SINGLEPHASE
//
// MessageText:
//
// The resource manager has performed a single-phase commit of the
transaction.
//
#define
XACT_S_SINGLEPHASE
_HRESULT_TYPEDEF_(0x0004D009L)
//
// MessageId: XACT_S_LOCALLY_OK
//
// MessageText:
//
// The local transaction has not aborted.
//
#define
XACT_S_LOCALLY_OK
_HRESULT_TYPEDEF_(0x0004D00AL)
//
// MessageId: XACT_S_LASTRESOURCEMANAGER
//
// MessageText:
//
// The resource manager has requested to be the coordinator (last
resource manager) for the transaction.
//
#define
XACT_S_LASTRESOURCEMANAGER
_HRESULT_TYPEDEF_(0x0004D010L)
#define
CONTEXT_E_FIRST
0x8004E000L
#define
CONTEXT_E_LAST
0x8004E02FL
#define
CONTEXT_S_FIRST
0x0004E000L
#define
CONTEXT_S_LAST
0x0004E02FL
//
// MessageId: CONTEXT_E_ABORTED
//
// MessageText:
//
// The root transaction wanted to commit, but transaction aborted
//
#define
CONTEXT_E_ABORTED
_HRESULT_TYPEDEF_(0x8004E002L)
//
// MessageId: CONTEXT_E_ABORTING
//
// MessageText:
//
// You made a method call on a COM+ component that has a transaction
that has already aborted or in the process of aborting.
//
#define
CONTEXT_E_ABORTING
_HRESULT_TYPEDEF_(0x8004E003L)
//
// MessageId: CONTEXT_E_NOCONTEXT
//
// MessageText:
//
// There is no MTS object context
//
#define
CONTEXT_E_NOCONTEXT
_HRESULT_TYPEDEF_(0x8004E004L)
//
// MessageId: CONTEXT_E_WOULD_DEADLOCK
//
// MessageText:
//
// The component is configured to use synchronization and this method
call would cause a deadlock to occur.
//
#define
CONTEXT_E_WOULD_DEADLOCK
_HRESULT_TYPEDEF_(0x8004E005L)
//
// MessageId: CONTEXT_E_SYNCH_TIMEOUT
//
// MessageText:
//
// The component is configured to use synchronization and a thread has
timed out waiting to enter the context.
//
#define
CONTEXT_E_SYNCH_TIMEOUT
_HRESULT_TYPEDEF_(0x8004E006L)
//
// MessageId: CONTEXT_E_OLDREF
//
// MessageText:
//
// You made a method call on a COM+ component that has a transaction
that has already committed or aborted.
//
#define
CONTEXT_E_OLDREF
_HRESULT_TYPEDEF_(0x8004E007L)
//
// MessageId: CONTEXT_E_ROLENOTFOUND
//
// MessageText:
//
// The specified role was not configured for the application
//
#define
CONTEXT_E_ROLENOTFOUND
_HRESULT_TYPEDEF_(0x8004E00CL)
//
// MessageId: CONTEXT_E_TMNOTAVAILABLE
//
// MessageText:
//
// COM+ was unable to talk to the Microsoft Distributed Transaction
Coordinator
//
#define
CONTEXT_E_TMNOTAVAILABLE
_HRESULT_TYPEDEF_(0x8004E00FL)
//
// MessageId: CO_E_ACTIVATIONFAILED
//
// MessageText:
//
// An unexpected error occurred during COM+ Activation.
//
#define
CO_E_ACTIVATIONFAILED
_HRESULT_TYPEDEF_(0x8004E021L)
//
// MessageId: CO_E_ACTIVATIONFAILED_EVENTLOGGED
//
// MessageText:
//
// COM+ Activation failed. Check the event log for more information
//
#define CO_E_ACTIVATIONFAILED_EVENTLOGGED _HRESULT_TYPEDEF_(0x8004E022L)
//
// MessageId: CO_E_ACTIVATIONFAILED_CATALOGERROR
//
// MessageText:
//
// COM+ Activation failed due to a catalog or configuration error.
//
#define CO_E_ACTIVATIONFAILED_CATALOGERROR
_HRESULT_TYPEDEF_(0x8004E023L)
//
// MessageId: CO_E_ACTIVATIONFAILED_TIMEOUT
//
// MessageText:
//
// COM+ activation failed because the activation could not be completed
in the specified amount of time.
//
#define CO_E_ACTIVATIONFAILED_TIMEOUT
_HRESULT_TYPEDEF_(0x8004E024L)
//
// MessageId: CO_E_INITIALIZATIONFAILED
//
// MessageText:
//
// COM+ Activation failed because an initialization function failed.
Check the event log for more information.
//
#define
CO_E_INITIALIZATIONFAILED
_HRESULT_TYPEDEF_(0x8004E025L)
//
// MessageId: CONTEXT_E_NOJIT
//
// MessageText:
//
// The requested operation requires that JIT be in the current context
and it is not
//
#define
CONTEXT_E_NOJIT
_HRESULT_TYPEDEF_(0x8004E026L)
//
// MessageId: CONTEXT_E_NOTRANSACTION
//
// MessageText:
//
// The requested operation requires that the current context have a
Transaction, and it does not
//
#define
CONTEXT_E_NOTRANSACTION
_HRESULT_TYPEDEF_(0x8004E027L)
//
// MessageId: CO_E_THREADINGMODEL_CHANGED
//
// MessageText:
//
// The components threading model has changed after install into a COM+
Application. Please re-install component.
//
#define
CO_E_THREADINGMODEL_CHANGED
_HRESULT_TYPEDEF_(0x8004E028L)
//
// MessageId: CO_E_NOIISINTRINSICS
//
// MessageText:
//
// IIS intrinsics not available. Start your work with IIS.
//
#define
CO_E_NOIISINTRINSICS
_HRESULT_TYPEDEF_(0x8004E029L)
//
// MessageId: CO_E_NOCOOKIES
//
// MessageText:
//
// An attempt to write a cookie failed.
//
#define
CO_E_NOCOOKIES
_HRESULT_TYPEDEF_(0x8004E02AL)
//
// MessageId: CO_E_DBERROR
//
// MessageText:
//
// An attempt to use a database generated a database specific error.
//
#define
CO_E_DBERROR
_HRESULT_TYPEDEF_(0x8004E02BL)
//
// MessageId: CO_E_NOTPOOLED
//
// MessageText:
//
// The COM+ component you created must use object pooling to work.
//
#define
CO_E_NOTPOOLED
_HRESULT_TYPEDEF_(0x8004E02CL)
//
// MessageId: CO_E_NOTCONSTRUCTED
//
// MessageText:
//
// The COM+ component you created must use object construction to work
correctly.
//
#define
CO_E_NOTCONSTRUCTED
_HRESULT_TYPEDEF_(0x8004E02DL)
//
// MessageId: CO_E_NOSYNCHRONIZATION
//
// MessageText:
//
// The COM+ component requires synchronization, and it is not
configured for it.
//
#define
CO_E_NOSYNCHRONIZATION
_HRESULT_TYPEDEF_(0x8004E02EL)
//
// MessageId: CO_E_ISOLEVELMISMATCH
//
// MessageText:
//
//
The TxIsolation Level property for the COM+ component being created is
stronger than the TxIsolationLevel for the "root" component for the
transaction. The creation failed.
//
#define
CO_E_ISOLEVELMISMATCH
_HRESULT_TYPEDEF_(0x8004E02FL)
//
// MessageId: CO_E_CALL_OUT_OF_TX_SCOPE_NOT_ALLOWED
//
// MessageText:
//
//
The component attempted to make a cross-context call between
invocations of EnterTransactionScopeand ExitTransactionScope. This is
not allowed. Cross-context calls cannot be made while inside of a
transaction scope.
//
#define CO_E_CALL_OUT_OF_TX_SCOPE_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x8004E030L)
//
// MessageId: CO_E_EXIT_TRANSACTION_SCOPE_NOT_CALLED
//
// MessageText:
//
//
The component made a call to EnterTransactionScope, but did not make a
corresponding call to ExitTransactionScope before returning.
//
#define CO_E_EXIT_TRANSACTION_SCOPE_NOT_CALLED
_HRESULT_TYPEDEF_(0x8004E031L)
//
// Old OLE Success Codes
//
//
// MessageId: OLE_S_USEREG
//
// MessageText:
//
// Use the registry database to provide the requested information
//
#define
OLE_S_USEREG
_HRESULT_TYPEDEF_(0x00040000L)
//
// MessageId: OLE_S_STATIC
//
// MessageText:
//
// Success, but static
//
#define
OLE_S_STATIC
_HRESULT_TYPEDEF_(0x00040001L)
//
// MessageId: OLE_S_MAC_CLIPFORMAT
//
// MessageText:
//
// Macintosh clipboard format
//
#define
OLE_S_MAC_CLIPFORMAT
_HRESULT_TYPEDEF_(0x00040002L)
//
// MessageId: DRAGDROP_S_DROP
//
// MessageText:
//
// Successful drop took place
//
#define
DRAGDROP_S_DROP
_HRESULT_TYPEDEF_(0x00040100L)
//
// MessageId: DRAGDROP_S_CANCEL
//
// MessageText:
//
// Drag-drop operation canceled
//
#define
DRAGDROP_S_CANCEL
_HRESULT_TYPEDEF_(0x00040101L)
//
// MessageId: DRAGDROP_S_USEDEFAULTCURSORS
//
// MessageText:
//
// Use the default cursor
//
#define
DRAGDROP_S_USEDEFAULTCURSORS
_HRESULT_TYPEDEF_(0x00040102L)
//
// MessageId: DATA_S_SAMEFORMATETC
//
// MessageText:
//
// Data has same FORMATETC
//
#define
DATA_S_SAMEFORMATETC
_HRESULT_TYPEDEF_(0x00040130L)
//
// MessageId: VIEW_S_ALREADY_FROZEN
//
// MessageText:
//
// View is already frozen
//
#define
VIEW_S_ALREADY_FROZEN
_HRESULT_TYPEDEF_(0x00040140L)
//
// MessageId: CACHE_S_FORMATETC_NOTSUPPORTED
//
// MessageText:
//
// FORMATETC not supported
//
#define CACHE_S_FORMATETC_NOTSUPPORTED
_HRESULT_TYPEDEF_(0x00040170L)
//
// MessageId: CACHE_S_SAMECACHE
//
// MessageText:
//
// Same cache
//
#define
CACHE_S_SAMECACHE
_HRESULT_TYPEDEF_(0x00040171L)
//
// MessageId: CACHE_S_SOMECACHES_NOTUPDATED
//
// MessageText:
//
// Some cache(s) not updated
//
#define CACHE_S_SOMECACHES_NOTUPDATED
_HRESULT_TYPEDEF_(0x00040172L)
//
// MessageId: OLEOBJ_S_INVALIDVERB
//
// MessageText:
//
// Invalid verb for OLE object
//
#define
OLEOBJ_S_INVALIDVERB
_HRESULT_TYPEDEF_(0x00040180L)
//
// MessageId: OLEOBJ_S_CANNOT_DOVERB_NOW
//
// MessageText:
//
// Verb number is valid but verb cannot be done now
//
#define
OLEOBJ_S_CANNOT_DOVERB_NOW
_HRESULT_TYPEDEF_(0x00040181L)
//
// MessageId: OLEOBJ_S_INVALIDHWND
//
// MessageText:
//
// Invalid window handle passed
//
#define
OLEOBJ_S_INVALIDHWND
_HRESULT_TYPEDEF_(0x00040182L)
//
// MessageId: INPLACE_S_TRUNCATED
//
// MessageText:
//
// Message is too long; some of it had to be truncated before displaying
//
#define
INPLACE_S_TRUNCATED
_HRESULT_TYPEDEF_(0x000401A0L)
//
// MessageId: CONVERT10_S_NO_PRESENTATION
//
// MessageText:
//
// Unable to convert OLESTREAM to IStorage
//
#define
CONVERT10_S_NO_PRESENTATION
_HRESULT_TYPEDEF_(0x000401C0L)
//
// MessageId: MK_S_REDUCED_TO_SELF
//
// MessageText:
//
// Moniker reduced to itself
//
#define
MK_S_REDUCED_TO_SELF
_HRESULT_TYPEDEF_(0x000401E2L)
//
// MessageId: MK_S_ME
//
// MessageText:
//
// Common prefix is this moniker
//
#define
MK_S_ME
_HRESULT_TYPEDEF_(0x000401E4L)
//
// MessageId: MK_S_HIM
//
// MessageText:
//
// Common prefix is input moniker
//
#define
MK_S_HIM
_HRESULT_TYPEDEF_(0x000401E5L)
//
// MessageId: MK_S_US
//
// MessageText:
//
// Common prefix is both monikers
//
#define
MK_S_US
_HRESULT_TYPEDEF_(0x000401E6L)
//
// MessageId: MK_S_MONIKERALREADYREGISTERED
//
// MessageText:
//
// Moniker is already registered in running object table
//
#define MK_S_MONIKERALREADYREGISTERED
_HRESULT_TYPEDEF_(0x000401E7L)
//
// Task Scheduler errors
//
//
// MessageId: SCHED_S_TASK_READY
//
// MessageText:
//
// The task is ready to run at its next scheduled time.
//
#define
SCHED_S_TASK_READY
_HRESULT_TYPEDEF_(0x00041300L)
//
// MessageId: SCHED_S_TASK_RUNNING
//
// MessageText:
//
// The task is currently running.
//
#define
SCHED_S_TASK_RUNNING
_HRESULT_TYPEDEF_(0x00041301L)
//
// MessageId: SCHED_S_TASK_DISABLED
//
// MessageText:
//
// The task will not run at the scheduled times because it has been
disabled.
//
#define
SCHED_S_TASK_DISABLED
_HRESULT_TYPEDEF_(0x00041302L)
//
// MessageId: SCHED_S_TASK_HAS_NOT_RUN
//
// MessageText:
//
// The task has not yet run.
//
#define
SCHED_S_TASK_HAS_NOT_RUN
_HRESULT_TYPEDEF_(0x00041303L)
//
// MessageId: SCHED_S_TASK_NO_MORE_RUNS
//
// MessageText:
//
// There are no more runs scheduled for this task.
//
#define
SCHED_S_TASK_NO_MORE_RUNS
_HRESULT_TYPEDEF_(0x00041304L)
//
// MessageId: SCHED_S_TASK_NOT_SCHEDULED
//
// MessageText:
//
// One or more of the properties that are needed to run this task on a
schedule have not been set.
//
#define
SCHED_S_TASK_NOT_SCHEDULED
_HRESULT_TYPEDEF_(0x00041305L)
//
// MessageId: SCHED_S_TASK_TERMINATED
//
// MessageText:
//
// The last run of the task was terminated by the user.
//
#define
SCHED_S_TASK_TERMINATED
_HRESULT_TYPEDEF_(0x00041306L)
//
// MessageId: SCHED_S_TASK_NO_VALID_TRIGGERS
//
// MessageText:
//
// Either the task has no triggers or the existing triggers are
disabled or not set.
//
#define SCHED_S_TASK_NO_VALID_TRIGGERS
_HRESULT_TYPEDEF_(0x00041307L)
//
// MessageId: SCHED_S_EVENT_TRIGGER
//
// MessageText:
//
// Event triggers don't have set run times.
//
#define
SCHED_S_EVENT_TRIGGER
_HRESULT_TYPEDEF_(0x00041308L)
//
// MessageId: SCHED_E_TRIGGER_NOT_FOUND
//
// MessageText:
//
// Trigger not found.
//
#define
SCHED_E_TRIGGER_NOT_FOUND
_HRESULT_TYPEDEF_(0x80041309L)
//
// MessageId: SCHED_E_TASK_NOT_READY
//
// MessageText:
//
// One or more of the properties that are needed to run this task have
not been set.
//
#define
SCHED_E_TASK_NOT_READY
_HRESULT_TYPEDEF_(0x8004130AL)
//
// MessageId: SCHED_E_TASK_NOT_RUNNING
//
// MessageText:
//
// There is no running instance of the task.
//
#define
SCHED_E_TASK_NOT_RUNNING
_HRESULT_TYPEDEF_(0x8004130BL)
//
// MessageId: SCHED_E_SERVICE_NOT_INSTALLED
//
// MessageText:
//
// The Task Scheduler Service is not installed on this computer.
//
#define SCHED_E_SERVICE_NOT_INSTALLED
_HRESULT_TYPEDEF_(0x8004130CL)
//
// MessageId: SCHED_E_CANNOT_OPEN_TASK
//
// MessageText:
//
// The task object could not be opened.
//
#define
SCHED_E_CANNOT_OPEN_TASK
_HRESULT_TYPEDEF_(0x8004130DL)
//
// MessageId: SCHED_E_INVALID_TASK
//
// MessageText:
//
// The object is either an invalid task object or is not a task object.
//
#define
SCHED_E_INVALID_TASK
_HRESULT_TYPEDEF_(0x8004130EL)
//
// MessageId: SCHED_E_ACCOUNT_INFORMATION_NOT_SET
//
// MessageText:
//
// No account information could be found in the Task Scheduler security
database for the task indicated.
//
#define SCHED_E_ACCOUNT_INFORMATION_NOT_SET
_HRESULT_TYPEDEF_(0x8004130FL)
//
// MessageId: SCHED_E_ACCOUNT_NAME_NOT_FOUND
//
// MessageText:
//
// Unable to establish existence of the account specified.
//
#define SCHED_E_ACCOUNT_NAME_NOT_FOUND
_HRESULT_TYPEDEF_(0x80041310L)
//
// MessageId: SCHED_E_ACCOUNT_DBASE_CORRUPT
//
// MessageText:
//
// Corruption was detected in the Task Scheduler security database; the
database has been reset.
//
#define SCHED_E_ACCOUNT_DBASE_CORRUPT
_HRESULT_TYPEDEF_(0x80041311L)
//
// MessageId: SCHED_E_NO_SECURITY_SERVICES
//
// MessageText:
//
// Task Scheduler security services are available only on Windows NT.
//
#define
SCHED_E_NO_SECURITY_SERVICES
_HRESULT_TYPEDEF_(0x80041312L)
//
// MessageId: SCHED_E_UNKNOWN_OBJECT_VERSION
//
// MessageText:
//
// The task object version is either unsupported or invalid.
//
#define SCHED_E_UNKNOWN_OBJECT_VERSION
_HRESULT_TYPEDEF_(0x80041313L)
//
// MessageId: SCHED_E_UNSUPPORTED_ACCOUNT_OPTION
//
// MessageText:
//
// The task has been configured with an unsupported combination of
account settings and run time options.
//
#define SCHED_E_UNSUPPORTED_ACCOUNT_OPTION
_HRESULT_TYPEDEF_(0x80041314L)
//
// MessageId: SCHED_E_SERVICE_NOT_RUNNING
//
// MessageText:
//
// The Task Scheduler Service is not running.
//
#define
SCHED_E_SERVICE_NOT_RUNNING
_HRESULT_TYPEDEF_(0x80041315L)
//
// MessageId: SCHED_E_UNEXPECTEDNODE
//
// MessageText:
//
// The task XML contains an unexpected node.
//
#define
SCHED_E_UNEXPECTEDNODE
_HRESULT_TYPEDEF_(0x80041316L)
//
// MessageId: SCHED_E_NAMESPACE
//
// MessageText:
//
// The task XML contains an element or attribute from an unexpected
namespace.
//
#define
SCHED_E_NAMESPACE
_HRESULT_TYPEDEF_(0x80041317L)
//
// MessageId: SCHED_E_INVALIDVALUE
//
// MessageText:
//
// The task XML contains a value which is incorrectly formatted or out
of range.
//
#define
SCHED_E_INVALIDVALUE
_HRESULT_TYPEDEF_(0x80041318L)
//
// MessageId: SCHED_E_MISSINGNODE
//
// MessageText:
//
// The task XML is missing a required element or attribute.
//
#define
SCHED_E_MISSINGNODE
_HRESULT_TYPEDEF_(0x80041319L)
//
// MessageId: SCHED_E_MALFORMEDXML
//
// MessageText:
//
// The task XML is malformed.
//
#define
SCHED_E_MALFORMEDXML
_HRESULT_TYPEDEF_(0x8004131AL)
//
// MessageId: SCHED_S_SOME_TRIGGERS_FAILED
//
// MessageText:
//
// The task is registered, but not all specified triggers will start
the task.
//
#define
SCHED_S_SOME_TRIGGERS_FAILED
_HRESULT_TYPEDEF_(0x0004131BL)
//
// MessageId: SCHED_S_BATCH_LOGON_PROBLEM
//
// MessageText:
//
// The task is registered, but may fail to start. Batch logon privilege
needs to be enabled for the task principal.
//
#define
SCHED_S_BATCH_LOGON_PROBLEM
_HRESULT_TYPEDEF_(0x0004131CL)
//
// MessageId: SCHED_E_TOO_MANY_NODES
//
// MessageText:
//
// The task XML contains too many nodes of the same type.
//
#define
SCHED_E_TOO_MANY_NODES
_HRESULT_TYPEDEF_(0x8004131DL)
//
// MessageId: SCHED_E_PAST_END_BOUNDARY
//
// MessageText:
//
// The task cannot be started after the trigger's end boundary.
//
#define
SCHED_E_PAST_END_BOUNDARY
_HRESULT_TYPEDEF_(0x8004131EL)
//
// MessageId: SCHED_E_ALREADY_RUNNING
//
// MessageText:
//
// An instance of this task is already running.
//
#define
SCHED_E_ALREADY_RUNNING
_HRESULT_TYPEDEF_(0x8004131FL)
//
// MessageId: SCHED_E_USER_NOT_LOGGED_ON
//
// MessageText:
//
// The task will not run because the user is not logged on.
//
#define
SCHED_E_USER_NOT_LOGGED_ON
_HRESULT_TYPEDEF_(0x80041320L)
//
// MessageId: SCHED_E_INVALID_TASK_HASH
//
// MessageText:
//
// The task image is corrupt or has been tampered with.
//
#define
SCHED_E_INVALID_TASK_HASH
_HRESULT_TYPEDEF_(0x80041321L)
//
// MessageId: SCHED_E_SERVICE_NOT_AVAILABLE
//
// MessageText:
//
// The Task Scheduler service is not available.
//
#define SCHED_E_SERVICE_NOT_AVAILABLE
_HRESULT_TYPEDEF_(0x80041322L)
//
// MessageId: SCHED_E_SERVICE_TOO_BUSY
//
// MessageText:
//
// The Task Scheduler service is too busy to handle your request.
Please try again later.
//
#define
SCHED_E_SERVICE_TOO_BUSY
_HRESULT_TYPEDEF_(0x80041323L)
//
// MessageId: SCHED_E_TASK_ATTEMPTED
//
// MessageText:
//
//
The Task Scheduler service attempted to run the task, but the task did
not run due to one of the constraints in the task definition.
//
#define
SCHED_E_TASK_ATTEMPTED
_HRESULT_TYPEDEF_(0x80041324L)
//
// MessageId: SCHED_S_TASK_QUEUED
//
// MessageText:
//
// The Task Scheduler service has asked the task to run.
//
#define
SCHED_S_TASK_QUEUED
_HRESULT_TYPEDEF_(0x00041325L)
//
// MessageId: SCHED_E_TASK_DISABLED
//
// MessageText:
//
// The task is disabled.
//
#define
SCHED_E_TASK_DISABLED
_HRESULT_TYPEDEF_(0x80041326L)
//
// MessageId: SCHED_E_TASK_NOT_V1_COMPAT
//
// MessageText:
//
// The task has properties that are not compatible with previous
versions of Windows.
//
#define
SCHED_E_TASK_NOT_V1_COMPAT
_HRESULT_TYPEDEF_(0x80041327L)
//
// MessageId: SCHED_E_START_ON_DEMAND
//
// MessageText:
//
// The task settings do not allow the task to start on demand.
//
#define
SCHED_E_START_ON_DEMAND
_HRESULT_TYPEDEF_(0x80041328L)
//
******************
// FACILITY_WINDOWS
// ******************
//
// Codes 0x0-0x01ff are reserved for the OLE group of
// interfaces.
//
//
// MessageId: CO_E_CLASS_CREATE_FAILED
//
// MessageText:
//
// Attempt to create a class object failed
//
#define
CO_E_CLASS_CREATE_FAILED
_HRESULT_TYPEDEF_(0x80080001L)
//
// MessageId: CO_E_SCM_ERROR
//
// MessageText:
//
// OLE service could not bind object
//
#define
CO_E_SCM_ERROR
_HRESULT_TYPEDEF_(0x80080002L)
//
// MessageId: CO_E_SCM_RPC_FAILURE
//
// MessageText:
//
// RPC communication failed with OLE service
//
#define
CO_E_SCM_RPC_FAILURE
_HRESULT_TYPEDEF_(0x80080003L)
//
// MessageId: CO_E_BAD_PATH
//
// MessageText:
//
// Bad path to object
//
#define
CO_E_BAD_PATH
_HRESULT_TYPEDEF_(0x80080004L)
//
// MessageId: CO_E_SERVER_EXEC_FAILURE
//
// MessageText:
//
// Server execution failed
//
#define
CO_E_SERVER_EXEC_FAILURE
_HRESULT_TYPEDEF_(0x80080005L)
//
// MessageId: CO_E_OBJSRV_RPC_FAILURE
//
// MessageText:
//
// OLE service could not communicate with the object server
//
#define
CO_E_OBJSRV_RPC_FAILURE
_HRESULT_TYPEDEF_(0x80080006L)
//
// MessageId: MK_E_NO_NORMALIZED
//
// MessageText:
//
// Moniker path could not be normalized
//
#define
MK_E_NO_NORMALIZED
_HRESULT_TYPEDEF_(0x80080007L)
//
// MessageId: CO_E_SERVER_STOPPING
//
// MessageText:
//
// Object server is stopping when OLE service contacts it
//
#define
CO_E_SERVER_STOPPING
_HRESULT_TYPEDEF_(0x80080008L)
//
// MessageId: MEM_E_INVALID_ROOT
//
// MessageText:
//
// An invalid root block pointer was specified
//
#define
MEM_E_INVALID_ROOT
_HRESULT_TYPEDEF_(0x80080009L)
//
// MessageId: MEM_E_INVALID_LINK
//
// MessageText:
//
// An allocation chain contained an invalid link pointer
//
#define
MEM_E_INVALID_LINK
_HRESULT_TYPEDEF_(0x80080010L)
//
// MessageId: MEM_E_INVALID_SIZE
//
// MessageText:
//
// The requested allocation size was too large
//
#define
MEM_E_INVALID_SIZE
_HRESULT_TYPEDEF_(0x80080011L)
//
// MessageId: CO_S_NOTALLINTERFACES
//
// MessageText:
//
// Not all the requested interfaces were available
//
#define
CO_S_NOTALLINTERFACES
_HRESULT_TYPEDEF_(0x00080012L)
//
// MessageId: CO_S_MACHINENAMENOTFOUND
//
// MessageText:
//
// The specified machine name was not found in the cache.
//
#define
CO_S_MACHINENAMENOTFOUND
_HRESULT_TYPEDEF_(0x00080013L)
//
// MessageId: CO_E_MISSING_DISPLAYNAME
//
// MessageText:
//
// The activation requires a display name to be present under the CLSID
key.
//
#define
CO_E_MISSING_DISPLAYNAME
_HRESULT_TYPEDEF_(0x80080015L)
//
// MessageId: CO_E_RUNAS_VALUE_MUST_BE_AAA
//
// MessageText:
//
// The activation requires that the RunAs value for the application is
Activate As Activator.
//
#define
CO_E_RUNAS_VALUE_MUST_BE_AAA
_HRESULT_TYPEDEF_(0x80080016L)
//
// MessageId: CO_E_ELEVATION_DISABLED
//
// MessageText:
//
// The class is not configured to support Elevated activation.
//
#define
CO_E_ELEVATION_DISABLED
_HRESULT_TYPEDEF_(0x80080017L)
//
******************
// FACILITY_DISPATCH
// ******************
//
// MessageId: DISP_E_UNKNOWNINTERFACE
//
// MessageText:
//
// Unknown interface.
//
#define
DISP_E_UNKNOWNINTERFACE
_HRESULT_TYPEDEF_(0x80020001L)
//
// MessageId: DISP_E_MEMBERNOTFOUND
//
// MessageText:
//
// Member not found.
//
#define
DISP_E_MEMBERNOTFOUND
_HRESULT_TYPEDEF_(0x80020003L)
//
// MessageId: DISP_E_PARAMNOTFOUND
//
// MessageText:
//
// Parameter not found.
//
#define
DISP_E_PARAMNOTFOUND
_HRESULT_TYPEDEF_(0x80020004L)
//
// MessageId: DISP_E_TYPEMISMATCH
//
// MessageText:
//
// Type mismatch.
//
#define
DISP_E_TYPEMISMATCH
_HRESULT_TYPEDEF_(0x80020005L)
//
// MessageId: DISP_E_UNKNOWNNAME
//
// MessageText:
//
// Unknown name.
//
#define
DISP_E_UNKNOWNNAME
_HRESULT_TYPEDEF_(0x80020006L)
//
// MessageId: DISP_E_NONAMEDARGS
//
// MessageText:
//
// No named arguments.
//
#define
DISP_E_NONAMEDARGS
_HRESULT_TYPEDEF_(0x80020007L)
//
// MessageId: DISP_E_BADVARTYPE
//
// MessageText:
//
// Bad variable type.
//
#define
DISP_E_BADVARTYPE
_HRESULT_TYPEDEF_(0x80020008L)
//
// MessageId: DISP_E_EXCEPTION
//
// MessageText:
//
// Exception occurred.
//
#define
DISP_E_EXCEPTION
_HRESULT_TYPEDEF_(0x80020009L)
//
// MessageId: DISP_E_OVERFLOW
//
// MessageText:
//
// Out of present range.
//
#define
DISP_E_OVERFLOW
_HRESULT_TYPEDEF_(0x8002000AL)
//
// MessageId: DISP_E_BADINDEX
//
// MessageText:
//
// Invalid index.
//
#define
DISP_E_BADINDEX
_HRESULT_TYPEDEF_(0x8002000BL)
//
// MessageId: DISP_E_UNKNOWNLCID
//
// MessageText:
//
// Unknown language.
//
#define
DISP_E_UNKNOWNLCID
_HRESULT_TYPEDEF_(0x8002000CL)
//
// MessageId: DISP_E_ARRAYISLOCKED
//
// MessageText:
//
// Memory is locked.
//
#define
DISP_E_ARRAYISLOCKED
_HRESULT_TYPEDEF_(0x8002000DL)
//
// MessageId: DISP_E_BADPARAMCOUNT
//
// MessageText:
//
// Invalid number of parameters.
//
#define
DISP_E_BADPARAMCOUNT
_HRESULT_TYPEDEF_(0x8002000EL)
//
// MessageId: DISP_E_PARAMNOTOPTIONAL
//
// MessageText:
//
// Parameter not optional.
//
#define
DISP_E_PARAMNOTOPTIONAL
_HRESULT_TYPEDEF_(0x8002000FL)
//
// MessageId: DISP_E_BADCALLEE
//
// MessageText:
//
// Invalid callee.
//
#define
DISP_E_BADCALLEE
_HRESULT_TYPEDEF_(0x80020010L)
//
// MessageId: DISP_E_NOTACOLLECTION
//
// MessageText:
//
// Does not support a collection.
//
#define
DISP_E_NOTACOLLECTION
_HRESULT_TYPEDEF_(0x80020011L)
//
// MessageId: DISP_E_DIVBYZERO
//
// MessageText:
//
// Division by zero.
//
#define
DISP_E_DIVBYZERO
_HRESULT_TYPEDEF_(0x80020012L)
//
// MessageId: DISP_E_BUFFERTOOSMALL
//
// MessageText:
//
// Buffer too small
//
#define
DISP_E_BUFFERTOOSMALL
_HRESULT_TYPEDEF_(0x80020013L)
//
// MessageId: TYPE_E_BUFFERTOOSMALL
//
// MessageText:
//
// Buffer too small.
//
#define
TYPE_E_BUFFERTOOSMALL
_HRESULT_TYPEDEF_(0x80028016L)
//
// MessageId: TYPE_E_FIELDNOTFOUND
//
// MessageText:
//
// Field name not defined in the record.
//
#define
TYPE_E_FIELDNOTFOUND
_HRESULT_TYPEDEF_(0x80028017L)
//
// MessageId: TYPE_E_INVDATAREAD
//
// MessageText:
//
// Old format or invalid type library.
//
#define
TYPE_E_INVDATAREAD
_HRESULT_TYPEDEF_(0x80028018L)
//
// MessageId: TYPE_E_UNSUPFORMAT
//
// MessageText:
//
// Old format or invalid type library.
//
#define
TYPE_E_UNSUPFORMAT
_HRESULT_TYPEDEF_(0x80028019L)
//
// MessageId: TYPE_E_REGISTRYACCESS
//
// MessageText:
//
// Error accessing the OLE registry.
//
#define
TYPE_E_REGISTRYACCESS
_HRESULT_TYPEDEF_(0x8002801CL)
//
// MessageId: TYPE_E_LIBNOTREGISTERED
//
// MessageText:
//
// Library not registered.
//
#define
TYPE_E_LIBNOTREGISTERED
_HRESULT_TYPEDEF_(0x8002801DL)
//
// MessageId: TYPE_E_UNDEFINEDTYPE
//
// MessageText:
//
// Bound to unknown type.
//
#define
TYPE_E_UNDEFINEDTYPE
_HRESULT_TYPEDEF_(0x80028027L)
//
// MessageId: TYPE_E_QUALIFIEDNAMEDISALLOWED
//
// MessageText:
//
// Qualified name disallowed.
//
#define TYPE_E_QUALIFIEDNAMEDISALLOWED
_HRESULT_TYPEDEF_(0x80028028L)
//
// MessageId: TYPE_E_INVALIDSTATE
//
// MessageText:
//
// Invalid forward reference, or reference to uncompiled type.
//
#define
TYPE_E_INVALIDSTATE
_HRESULT_TYPEDEF_(0x80028029L)
//
// MessageId: TYPE_E_WRONGTYPEKIND
//
// MessageText:
//
// Type mismatch.
//
#define
TYPE_E_WRONGTYPEKIND
_HRESULT_TYPEDEF_(0x8002802AL)
//
// MessageId: TYPE_E_ELEMENTNOTFOUND
//
// MessageText:
//
// Element not found.
//
#define
TYPE_E_ELEMENTNOTFOUND
_HRESULT_TYPEDEF_(0x8002802BL)
//
// MessageId: TYPE_E_AMBIGUOUSNAME
//
// MessageText:
//
// Ambiguous name.
//
#define
TYPE_E_AMBIGUOUSNAME
_HRESULT_TYPEDEF_(0x8002802CL)
//
// MessageId: TYPE_E_NAMECONFLICT
//
// MessageText:
//
// Name already exists in the library.
//
#define
TYPE_E_NAMECONFLICT
_HRESULT_TYPEDEF_(0x8002802DL)
//
// MessageId: TYPE_E_UNKNOWNLCID
//
// MessageText:
//
// Unknown LCID.
//
#define
TYPE_E_UNKNOWNLCID
_HRESULT_TYPEDEF_(0x8002802EL)
//
// MessageId: TYPE_E_DLLFUNCTIONNOTFOUND
//
// MessageText:
//
// Function not defined in specified DLL.
//
#define
TYPE_E_DLLFUNCTIONNOTFOUND
_HRESULT_TYPEDEF_(0x8002802FL)
//
// MessageId: TYPE_E_BADMODULEKIND
//
// MessageText:
//
// Wrong module kind for the operation.
//
#define
TYPE_E_BADMODULEKIND
_HRESULT_TYPEDEF_(0x800288BDL)
//
// MessageId: TYPE_E_SIZETOOBIG
//
// MessageText:
//
// Size may not exceed 64K.
//
#define
TYPE_E_SIZETOOBIG
_HRESULT_TYPEDEF_(0x800288C5L)
//
// MessageId: TYPE_E_DUPLICATEID
//
// MessageText:
//
// Duplicate ID in inheritance hierarchy.
//
#define
TYPE_E_DUPLICATEID
_HRESULT_TYPEDEF_(0x800288C6L)
//
// MessageId: TYPE_E_INVALIDID
//
// MessageText:
//
// Incorrect inheritance depth in standard OLE hmember.
//
#define
TYPE_E_INVALIDID
_HRESULT_TYPEDEF_(0x800288CFL)
//
// MessageId: TYPE_E_TYPEMISMATCH
//
// MessageText:
//
// Type mismatch.
//
#define
TYPE_E_TYPEMISMATCH
_HRESULT_TYPEDEF_(0x80028CA0L)
//
// MessageId: TYPE_E_OUTOFBOUNDS
//
// MessageText:
//
// Invalid number of arguments.
//
#define
TYPE_E_OUTOFBOUNDS
_HRESULT_TYPEDEF_(0x80028CA1L)
//
// MessageId: TYPE_E_IOERROR
//
// MessageText:
//
// I/O Error.
//
#define
TYPE_E_IOERROR
_HRESULT_TYPEDEF_(0x80028CA2L)
//
// MessageId: TYPE_E_CANTCREATETMPFILE
//
// MessageText:
//
// Error creating unique tmp file.
//
#define
TYPE_E_CANTCREATETMPFILE
_HRESULT_TYPEDEF_(0x80028CA3L)
//
// MessageId: TYPE_E_CANTLOADLIBRARY
//
// MessageText:
//
// Error loading type library/DLL.
//
#define
TYPE_E_CANTLOADLIBRARY
_HRESULT_TYPEDEF_(0x80029C4AL)
//
// MessageId: TYPE_E_INCONSISTENTPROPFUNCS
//
// MessageText:
//
// Inconsistent property functions.
//
#define
TYPE_E_INCONSISTENTPROPFUNCS
_HRESULT_TYPEDEF_(0x80029C83L)
//
// MessageId: TYPE_E_CIRCULARTYPE
//
// MessageText:
//
// Circular dependency between types/modules.
//
#define
TYPE_E_CIRCULARTYPE
_HRESULT_TYPEDEF_(0x80029C84L)
//
******************
// FACILITY_STORAGE
// ******************
//
// MessageId: STG_E_INVALIDFUNCTION
//
// MessageText:
//
// Unable to perform requested operation.
//
#define
STG_E_INVALIDFUNCTION
_HRESULT_TYPEDEF_(0x80030001L)
//
// MessageId: STG_E_FILENOTFOUND
//
// MessageText:
//
// %1 could not be found.
//
#define
STG_E_FILENOTFOUND
_HRESULT_TYPEDEF_(0x80030002L)
//
// MessageId: STG_E_PATHNOTFOUND
//
// MessageText:
//
// The path %1 could not be found.
//
#define
STG_E_PATHNOTFOUND
_HRESULT_TYPEDEF_(0x80030003L)
//
// MessageId: STG_E_TOOMANYOPENFILES
//
// MessageText:
//
// There are insufficient resources to open another file.
//
#define
STG_E_TOOMANYOPENFILES
_HRESULT_TYPEDEF_(0x80030004L)
//
// MessageId: STG_E_ACCESSDENIED
//
// MessageText:
//
// Access Denied.
//
#define
STG_E_ACCESSDENIED
_HRESULT_TYPEDEF_(0x80030005L)
//
// MessageId: STG_E_INVALIDHANDLE
//
// MessageText:
//
// Attempted an operation on an invalid object.
//
#define
STG_E_INVALIDHANDLE
_HRESULT_TYPEDEF_(0x80030006L)
//
// MessageId: STG_E_INSUFFICIENTMEMORY
//
// MessageText:
//
// There is insufficient memory available to complete operation.
//
#define
STG_E_INSUFFICIENTMEMORY
_HRESULT_TYPEDEF_(0x80030008L)
//
// MessageId: STG_E_INVALIDPOINTER
//
// MessageText:
//
// Invalid pointer error.
//
#define
STG_E_INVALIDPOINTER
_HRESULT_TYPEDEF_(0x80030009L)
//
// MessageId: STG_E_NOMOREFILES
//
// MessageText:
//
// There are no more entries to return.
//
#define
STG_E_NOMOREFILES
_HRESULT_TYPEDEF_(0x80030012L)
//
// MessageId: STG_E_DISKISWRITEPROTECTED
//
// MessageText:
//
// Disk is write-protected.
//
#define
STG_E_DISKISWRITEPROTECTED
_HRESULT_TYPEDEF_(0x80030013L)
//
// MessageId: STG_E_SEEKERROR
//
// MessageText:
//
// An error occurred during a seek operation.
//
#define
STG_E_SEEKERROR
_HRESULT_TYPEDEF_(0x80030019L)
//
// MessageId: STG_E_WRITEFAULT
//
// MessageText:
//
// A disk error occurred during a write operation.
//
#define
STG_E_WRITEFAULT
_HRESULT_TYPEDEF_(0x8003001DL)
//
// MessageId: STG_E_READFAULT
//
// MessageText:
//
// A disk error occurred during a read operation.
//
#define
STG_E_READFAULT
_HRESULT_TYPEDEF_(0x8003001EL)
//
// MessageId: STG_E_SHAREVIOLATION
//
// MessageText:
//
// A share violation has occurred.
//
#define
STG_E_SHAREVIOLATION
_HRESULT_TYPEDEF_(0x80030020L)
//
// MessageId: STG_E_LOCKVIOLATION
//
// MessageText:
//
// A lock violation has occurred.
//
#define
STG_E_LOCKVIOLATION
_HRESULT_TYPEDEF_(0x80030021L)
//
// MessageId: STG_E_FILEALREADYEXISTS
//
// MessageText:
//
// %1 already exists.
//
#define
STG_E_FILEALREADYEXISTS
_HRESULT_TYPEDEF_(0x80030050L)
//
// MessageId: STG_E_INVALIDPARAMETER
//
// MessageText:
//
// Invalid parameter error.
//
#define
STG_E_INVALIDPARAMETER
_HRESULT_TYPEDEF_(0x80030057L)
//
// MessageId: STG_E_MEDIUMFULL
//
// MessageText:
//
// There is insufficient disk space to complete operation.
//
#define
STG_E_MEDIUMFULL
_HRESULT_TYPEDEF_(0x80030070L)
//
// MessageId: STG_E_PROPSETMISMATCHED
//
// MessageText:
//
// Illegal write of non-simple property to simple property set.
//
#define
STG_E_PROPSETMISMATCHED
_HRESULT_TYPEDEF_(0x800300F0L)
//
// MessageId: STG_E_ABNORMALAPIEXIT
//
// MessageText:
//
// An API call exited abnormally.
//
#define
STG_E_ABNORMALAPIEXIT
_HRESULT_TYPEDEF_(0x800300FAL)
//
// MessageId: STG_E_INVALIDHEADER
//
// MessageText:
//
// The file %1 is not a valid compound file.
//
#define
STG_E_INVALIDHEADER
_HRESULT_TYPEDEF_(0x800300FBL)
//
// MessageId: STG_E_INVALIDNAME
//
// MessageText:
//
// The name %1 is not valid.
//
#define
STG_E_INVALIDNAME
_HRESULT_TYPEDEF_(0x800300FCL)
//
// MessageId: STG_E_UNKNOWN
//
// MessageText:
//
// An unexpected error occurred.
//
#define
STG_E_UNKNOWN
_HRESULT_TYPEDEF_(0x800300FDL)
//
// MessageId: STG_E_UNIMPLEMENTEDFUNCTION
//
// MessageText:
//
// That function is not implemented.
//
#define
STG_E_UNIMPLEMENTEDFUNCTION
_HRESULT_TYPEDEF_(0x800300FEL)
//
// MessageId: STG_E_INVALIDFLAG
//
// MessageText:
//
// Invalid flag error.
//
#define
STG_E_INVALIDFLAG
_HRESULT_TYPEDEF_(0x800300FFL)
//
// MessageId: STG_E_INUSE
//
// MessageText:
//
// Attempted to use an object that is busy.
//
#define
STG_E_INUSE
_HRESULT_TYPEDEF_(0x80030100L)
//
// MessageId: STG_E_NOTCURRENT
//
// MessageText:
//
// The storage has been changed since the last commit.
//
#define
STG_E_NOTCURRENT
_HRESULT_TYPEDEF_(0x80030101L)
//
// MessageId: STG_E_REVERTED
//
// MessageText:
//
// Attempted to use an object that has ceased to exist.
//
#define
STG_E_REVERTED
_HRESULT_TYPEDEF_(0x80030102L)
//
// MessageId: STG_E_CANTSAVE
//
// MessageText:
//
// Can't save.
//
#define
STG_E_CANTSAVE
_HRESULT_TYPEDEF_(0x80030103L)
//
// MessageId: STG_E_OLDFORMAT
//
// MessageText:
//
// The compound file %1 was produced with an incompatible version of
storage.
//
#define
STG_E_OLDFORMAT
_HRESULT_TYPEDEF_(0x80030104L)
//
// MessageId: STG_E_OLDDLL
//
// MessageText:
//
// The compound file %1 was produced with a newer version of storage.
//
#define
STG_E_OLDDLL
_HRESULT_TYPEDEF_(0x80030105L)
//
// MessageId: STG_E_SHAREREQUIRED
//
// MessageText:
//
// Share.exe or equivalent is required for operation.
//
#define
STG_E_SHAREREQUIRED
_HRESULT_TYPEDEF_(0x80030106L)
//
// MessageId: STG_E_NOTFILEBASEDSTORAGE
//
// MessageText:
//
// Illegal operation called on non-file based storage.
//
#define
STG_E_NOTFILEBASEDSTORAGE
_HRESULT_TYPEDEF_(0x80030107L)
//
// MessageId: STG_E_EXTANTMARSHALLINGS
//
// MessageText:
//
// Illegal operation called on object with extant marshallings.
//
#define
STG_E_EXTANTMARSHALLINGS
_HRESULT_TYPEDEF_(0x80030108L)
//
// MessageId: STG_E_DOCFILECORRUPT
//
// MessageText:
//
// The docfile has been corrupted.
//
#define
STG_E_DOCFILECORRUPT
_HRESULT_TYPEDEF_(0x80030109L)
//
// MessageId: STG_E_BADBASEADDRESS
//
// MessageText:
//
// OLE32.DLL has been loaded at the wrong address.
//
#define
STG_E_BADBASEADDRESS
_HRESULT_TYPEDEF_(0x80030110L)
//
// MessageId: STG_E_DOCFILETOOLARGE
//
// MessageText:
//
// The compound file is too large for the current implementation
//
#define
STG_E_DOCFILETOOLARGE
_HRESULT_TYPEDEF_(0x80030111L)
//
// MessageId: STG_E_NOTSIMPLEFORMAT
//
// MessageText:
//
// The compound file was not created with the STGM_SIMPLE flag
//
#define
STG_E_NOTSIMPLEFORMAT
_HRESULT_TYPEDEF_(0x80030112L)
//
// MessageId: STG_E_INCOMPLETE
//
// MessageText:
//
// The file download was aborted abnormally. The file is incomplete.
//
#define
STG_E_INCOMPLETE
_HRESULT_TYPEDEF_(0x80030201L)
//
// MessageId: STG_E_TERMINATED
//
// MessageText:
//
// The file download has been terminated.
//
#define
STG_E_TERMINATED
_HRESULT_TYPEDEF_(0x80030202L)
//
// MessageId: STG_S_CONVERTED
//
// MessageText:
//
// The underlying file was converted to compound file format.
//
#define
STG_S_CONVERTED
_HRESULT_TYPEDEF_(0x00030200L)
//
// MessageId: STG_S_BLOCK
//
// MessageText:
//
// The storage operation should block until more data is available.
//
#define
STG_S_BLOCK
_HRESULT_TYPEDEF_(0x00030201L)
//
// MessageId: STG_S_RETRYNOW
//
// MessageText:
//
// The storage operation should retry immediately.
//
#define
STG_S_RETRYNOW
_HRESULT_TYPEDEF_(0x00030202L)
//
// MessageId: STG_S_MONITORING
//
// MessageText:
//
// The notified event sink will not influence the storage operation.
//
#define
STG_S_MONITORING
_HRESULT_TYPEDEF_(0x00030203L)
//
// MessageId: STG_S_MULTIPLEOPENS
//
// MessageText:
//
// Multiple opens prevent consolidated. (commit succeeded).
//
#define
STG_S_MULTIPLEOPENS
_HRESULT_TYPEDEF_(0x00030204L)
//
// MessageId: STG_S_CONSOLIDATIONFAILED
//
// MessageText:
//
// Consolidation of the storage file failed. (commit succeeded).
//
#define
STG_S_CONSOLIDATIONFAILED
_HRESULT_TYPEDEF_(0x00030205L)
//
// MessageId: STG_S_CANNOTCONSOLIDATE
//
// MessageText:
//
// Consolidation of the storage file is inappropriate. (commit
succeeded).
//
#define
STG_S_CANNOTCONSOLIDATE
_HRESULT_TYPEDEF_(0x00030206L)
/*++
MessageId's
0x0305 - 0x031f (inclusive) are reserved for **STORAGE**
copy protection errors.
--*/
//
// MessageId: STG_E_STATUS_COPY_PROTECTION_FAILURE
//
// MessageText:
//
// Generic Copy Protection Error.
//
#define STG_E_STATUS_COPY_PROTECTION_FAILURE
_HRESULT_TYPEDEF_(0x80030305L)
//
// MessageId: STG_E_CSS_AUTHENTICATION_FAILURE
//
// MessageText:
//
// Copy Protection Error - DVD CSS Authentication failed.
//
#define STG_E_CSS_AUTHENTICATION_FAILURE _HRESULT_TYPEDEF_(0x80030306L)
//
// MessageId: STG_E_CSS_KEY_NOT_PRESENT
//
// MessageText:
//
// Copy Protection Error - The given sector does not have a valid CSS
key.
//
#define
STG_E_CSS_KEY_NOT_PRESENT
_HRESULT_TYPEDEF_(0x80030307L)
//
// MessageId: STG_E_CSS_KEY_NOT_ESTABLISHED
//
// MessageText:
//
// Copy Protection Error - DVD session key not established.
//
#define STG_E_CSS_KEY_NOT_ESTABLISHED
_HRESULT_TYPEDEF_(0x80030308L)
//
// MessageId: STG_E_CSS_SCRAMBLED_SECTOR
//
// MessageText:
//
// Copy Protection Error - The read failed because the sector is
encrypted.
//
#define
STG_E_CSS_SCRAMBLED_SECTOR
_HRESULT_TYPEDEF_(0x80030309L)
//
// MessageId: STG_E_CSS_REGION_MISMATCH
//
// MessageText:
//
// Copy Protection Error - The current DVD's region does not correspond
to the region setting of the drive.
//
#define
STG_E_CSS_REGION_MISMATCH
_HRESULT_TYPEDEF_(0x8003030AL)
//
// MessageId: STG_E_RESETS_EXHAUSTED
//
// MessageText:
//
// Copy Protection Error - The drive's region setting may be permanent
or the number of user resets has been exhausted.
//
#define
STG_E_RESETS_EXHAUSTED
_HRESULT_TYPEDEF_(0x8003030BL)
/*++
MessageId's
0x0305 - 0x031f (inclusive) are reserved for **STORAGE**
copy protection errors.
--*/
// ******************
// FACILITY_RPC
// ******************
//
// Codes 0x0-0x11 are propagated from 16 bit OLE.
//
//
// MessageId: RPC_E_CALL_REJECTED
//
// MessageText:
//
// Call was rejected by callee.
//
#define
RPC_E_CALL_REJECTED
_HRESULT_TYPEDEF_(0x80010001L)
//
// MessageId: RPC_E_CALL_CANCELED
//
// MessageText:
//
// Call was canceled by the message filter.
//
#define
RPC_E_CALL_CANCELED
_HRESULT_TYPEDEF_(0x80010002L)
//
// MessageId: RPC_E_CANTPOST_INSENDCALL
//
// MessageText:
//
// The caller is dispatching an intertask SendMessage call and cannot
call out via PostMessage.
//
#define
RPC_E_CANTPOST_INSENDCALL
_HRESULT_TYPEDEF_(0x80010003L)
//
// MessageId: RPC_E_CANTCALLOUT_INASYNCCALL
//
// MessageText:
//
// The caller is dispatching an asynchronous call and cannot make an
outgoing call on behalf of this call.
//
#define RPC_E_CANTCALLOUT_INASYNCCALL
_HRESULT_TYPEDEF_(0x80010004L)
//
// MessageId: RPC_E_CANTCALLOUT_INEXTERNALCALL
//
// MessageText:
//
// It is illegal to call out while inside message filter.
//
#define RPC_E_CANTCALLOUT_INEXTERNALCALL _HRESULT_TYPEDEF_(0x80010005L)
//
// MessageId: RPC_E_CONNECTION_TERMINATED
//
// MessageText:
//
// The connection terminated or is in a bogus state and cannot be used
any more. Other connections are still valid.
//
#define
RPC_E_CONNECTION_TERMINATED
_HRESULT_TYPEDEF_(0x80010006L)
//
// MessageId: RPC_E_SERVER_DIED
//
// MessageText:
//
//
The callee (server [not server application]) is not available and
disappeared; all connections are invalid. The call may have executed.
//
#define
RPC_E_SERVER_DIED
_HRESULT_TYPEDEF_(0x80010007L)
//
// MessageId: RPC_E_CLIENT_DIED
//
// MessageText:
//
// The caller (client) disappeared while the callee (server) was
processing a call.
//
#define
RPC_E_CLIENT_DIED
_HRESULT_TYPEDEF_(0x80010008L)
//
// MessageId: RPC_E_INVALID_DATAPACKET
//
// MessageText:
//
// The data packet with the marshalled parameter data is incorrect.
//
#define
RPC_E_INVALID_DATAPACKET
_HRESULT_TYPEDEF_(0x80010009L)
//
// MessageId: RPC_E_CANTTRANSMIT_CALL
//
// MessageText:
//
// The call was not transmitted properly; the message queue was full
and was not emptied after yielding.
//
#define
RPC_E_CANTTRANSMIT_CALL
_HRESULT_TYPEDEF_(0x8001000AL)
//
// MessageId: RPC_E_CLIENT_CANTMARSHAL_DATA
//
// MessageText:
//
// The client (caller) cannot marshall the parameter data - low memory,
etc.
//
#define RPC_E_CLIENT_CANTMARSHAL_DATA
_HRESULT_TYPEDEF_(0x8001000BL)
//
// MessageId: RPC_E_CLIENT_CANTUNMARSHAL_DATA
//
// MessageText:
//
// The client (caller) cannot unmarshall the return data - low memory,
etc.
//
#define RPC_E_CLIENT_CANTUNMARSHAL_DATA
_HRESULT_TYPEDEF_(0x8001000CL)
//
// MessageId: RPC_E_SERVER_CANTMARSHAL_DATA
//
// MessageText:
//
// The server (callee) cannot marshall the return data - low memory,
etc.
//
#define RPC_E_SERVER_CANTMARSHAL_DATA
_HRESULT_TYPEDEF_(0x8001000DL)
//
// MessageId: RPC_E_SERVER_CANTUNMARSHAL_DATA
//
// MessageText:
//
// The server (callee) cannot unmarshall the parameter data - low
memory, etc.
//
#define RPC_E_SERVER_CANTUNMARSHAL_DATA
_HRESULT_TYPEDEF_(0x8001000EL)
//
// MessageId: RPC_E_INVALID_DATA
//
// MessageText:
//
// Received data is invalid; could be server or client data.
//
#define
RPC_E_INVALID_DATA
_HRESULT_TYPEDEF_(0x8001000FL)
//
// MessageId: RPC_E_INVALID_PARAMETER
//
// MessageText:
//
// A particular parameter is invalid and cannot be (un)marshalled.
//
#define
RPC_E_INVALID_PARAMETER
_HRESULT_TYPEDEF_(0x80010010L)
//
// MessageId: RPC_E_CANTCALLOUT_AGAIN
//
// MessageText:
//
// There is no second outgoing call on same channel in DDE conversation.
//
#define
RPC_E_CANTCALLOUT_AGAIN
_HRESULT_TYPEDEF_(0x80010011L)
//
// MessageId: RPC_E_SERVER_DIED_DNE
//
// MessageText:
//
//
The callee (server [not server application]) is not available and
disappeared; all connections are invalid. The call did not execute.
//
#define
RPC_E_SERVER_DIED_DNE
_HRESULT_TYPEDEF_(0x80010012L)
//
// MessageId: RPC_E_SYS_CALL_FAILED
//
// MessageText:
//
// System call failed.
//
#define
RPC_E_SYS_CALL_FAILED
_HRESULT_TYPEDEF_(0x80010100L)
//
// MessageId: RPC_E_OUT_OF_RESOURCES
//
// MessageText:
//
// Could not allocate some required resource (memory, events, ...)
//
#define
RPC_E_OUT_OF_RESOURCES
_HRESULT_TYPEDEF_(0x80010101L)
//
// MessageId: RPC_E_ATTEMPTED_MULTITHREAD
//
// MessageText:
//
// Attempted to make calls on more than one thread in single threaded
mode.
//
#define
RPC_E_ATTEMPTED_MULTITHREAD
_HRESULT_TYPEDEF_(0x80010102L)
//
// MessageId: RPC_E_NOT_REGISTERED
//
// MessageText:
//
// The requested interface is not registered on the server object.
//
#define
RPC_E_NOT_REGISTERED
_HRESULT_TYPEDEF_(0x80010103L)
//
// MessageId: RPC_E_FAULT
//
// MessageText:
//
// RPC could not call the server or could not return the results of
calling the server.
//
#define
RPC_E_FAULT
_HRESULT_TYPEDEF_(0x80010104L)
//
// MessageId: RPC_E_SERVERFAULT
//
// MessageText:
//
// The server threw an exception.
//
#define
RPC_E_SERVERFAULT
_HRESULT_TYPEDEF_(0x80010105L)
//
// MessageId: RPC_E_CHANGED_MODE
//
// MessageText:
//
// Cannot change thread mode after it is set.
//
#define
RPC_E_CHANGED_MODE
_HRESULT_TYPEDEF_(0x80010106L)
//
// MessageId: RPC_E_INVALIDMETHOD
//
// MessageText:
//
// The method called does not exist on the server.
//
#define
RPC_E_INVALIDMETHOD
_HRESULT_TYPEDEF_(0x80010107L)
//
// MessageId: RPC_E_DISCONNECTED
//
// MessageText:
//
// The object invoked has disconnected from its clients.
//
#define
RPC_E_DISCONNECTED
_HRESULT_TYPEDEF_(0x80010108L)
//
// MessageId: RPC_E_RETRY
//
// MessageText:
//
// The object invoked chose not to process the call now. Try again
later.
//
#define
RPC_E_RETRY
_HRESULT_TYPEDEF_(0x80010109L)
//
// MessageId: RPC_E_SERVERCALL_RETRYLATER
//
// MessageText:
//
// The message filter indicated that the application is busy.
//
#define
RPC_E_SERVERCALL_RETRYLATER
_HRESULT_TYPEDEF_(0x8001010AL)
//
// MessageId: RPC_E_SERVERCALL_REJECTED
//
// MessageText:
//
// The message filter rejected the call.
//
#define
RPC_E_SERVERCALL_REJECTED
_HRESULT_TYPEDEF_(0x8001010BL)
//
// MessageId: RPC_E_INVALID_CALLDATA
//
// MessageText:
//
// A call control interfaces was called with invalid data.
//
#define
RPC_E_INVALID_CALLDATA
_HRESULT_TYPEDEF_(0x8001010CL)
//
// MessageId: RPC_E_CANTCALLOUT_ININPUTSYNCCALL
//
// MessageText:
//
// An outgoing call cannot be made since the application is dispatching
an input-synchronous call.
//
#define RPC_E_CANTCALLOUT_ININPUTSYNCCALL _HRESULT_TYPEDEF_(0x8001010DL)
//
// MessageId: RPC_E_WRONG_THREAD
//
// MessageText:
//
// The application called an interface that was marshalled for a
different thread.
//
#define
RPC_E_WRONG_THREAD
_HRESULT_TYPEDEF_(0x8001010EL)
//
// MessageId: RPC_E_THREAD_NOT_INIT
//
// MessageText:
//
// CoInitialize has not been called on the current thread.
//
#define
RPC_E_THREAD_NOT_INIT
_HRESULT_TYPEDEF_(0x8001010FL)
//
// MessageId: RPC_E_VERSION_MISMATCH
//
// MessageText:
//
// The version of OLE on the client and server machines does not match.
//
#define
RPC_E_VERSION_MISMATCH
_HRESULT_TYPEDEF_(0x80010110L)
//
// MessageId: RPC_E_INVALID_HEADER
//
// MessageText:
//
// OLE received a packet with an invalid header.
//
#define
RPC_E_INVALID_HEADER
_HRESULT_TYPEDEF_(0x80010111L)
//
// MessageId: RPC_E_INVALID_EXTENSION
//
// MessageText:
//
// OLE received a packet with an invalid extension.
//
#define
RPC_E_INVALID_EXTENSION
_HRESULT_TYPEDEF_(0x80010112L)
//
// MessageId: RPC_E_INVALID_IPID
//
// MessageText:
//
// The requested object or interface does not exist.
//
#define
RPC_E_INVALID_IPID
_HRESULT_TYPEDEF_(0x80010113L)
//
// MessageId: RPC_E_INVALID_OBJECT
//
// MessageText:
//
// The requested object does not exist.
//
#define
RPC_E_INVALID_OBJECT
_HRESULT_TYPEDEF_(0x80010114L)
//
// MessageId: RPC_S_CALLPENDING
//
// MessageText:
//
// OLE has sent a request and is waiting for a reply.
//
#define
RPC_S_CALLPENDING
_HRESULT_TYPEDEF_(0x80010115L)
//
// MessageId: RPC_S_WAITONTIMER
//
// MessageText:
//
// OLE is waiting before retrying a request.
//
#define
RPC_S_WAITONTIMER
_HRESULT_TYPEDEF_(0x80010116L)
//
// MessageId: RPC_E_CALL_COMPLETE
//
// MessageText:
//
// Call context cannot be accessed after call completed.
//
#define
RPC_E_CALL_COMPLETE
_HRESULT_TYPEDEF_(0x80010117L)
//
// MessageId: RPC_E_UNSECURE_CALL
//
// MessageText:
//
// Impersonate on unsecure calls is not supported.
//
#define
RPC_E_UNSECURE_CALL
_HRESULT_TYPEDEF_(0x80010118L)
//
// MessageId: RPC_E_TOO_LATE
//
// MessageText:
//
// Security must be initialized before any interfaces are marshalled or
unmarshalled. It cannot be changed once initialized.
//
#define
RPC_E_TOO_LATE
_HRESULT_TYPEDEF_(0x80010119L)
//
// MessageId: RPC_E_NO_GOOD_SECURITY_PACKAGES
//
// MessageText:
//
//
No security packages are installed on this machine or the user is not
logged on or there are no compatible security packages between the
client and server.
//
#define RPC_E_NO_GOOD_SECURITY_PACKAGES
_HRESULT_TYPEDEF_(0x8001011AL)
//
// MessageId: RPC_E_ACCESS_DENIED
//
// MessageText:
//
// Access is denied.
//
#define
RPC_E_ACCESS_DENIED
_HRESULT_TYPEDEF_(0x8001011BL)
//
// MessageId: RPC_E_REMOTE_DISABLED
//
// MessageText:
//
// Remote calls are not allowed for this process.
//
#define
RPC_E_REMOTE_DISABLED
_HRESULT_TYPEDEF_(0x8001011CL)
//
// MessageId: RPC_E_INVALID_OBJREF
//
// MessageText:
//
// The marshaled interface data packet (OBJREF) has an invalid or
unknown format.
//
#define
RPC_E_INVALID_OBJREF
_HRESULT_TYPEDEF_(0x8001011DL)
//
// MessageId: RPC_E_NO_CONTEXT
//
// MessageText:
//
// No context is associated with this call. This happens for some
custom marshalled calls and on the client side of the call.
//
#define
RPC_E_NO_CONTEXT
_HRESULT_TYPEDEF_(0x8001011EL)
//
// MessageId: RPC_E_TIMEOUT
//
// MessageText:
//
// This operation returned because the timeout period expired.
//
#define
RPC_E_TIMEOUT
_HRESULT_TYPEDEF_(0x8001011FL)
//
// MessageId: RPC_E_NO_SYNC
//
// MessageText:
//
// There are no synchronize objects to wait on.
//
#define
RPC_E_NO_SYNC
_HRESULT_TYPEDEF_(0x80010120L)
//
// MessageId: RPC_E_FULLSIC_REQUIRED
//
// MessageText:
//
// Full subject issuer chain SSL principal name expected from the
server.
//
#define
RPC_E_FULLSIC_REQUIRED
_HRESULT_TYPEDEF_(0x80010121L)
//
// MessageId: RPC_E_INVALID_STD_NAME
//
// MessageText:
//
// Principal name is not a valid MSSTD name.
//
#define
RPC_E_INVALID_STD_NAME
_HRESULT_TYPEDEF_(0x80010122L)
//
// MessageId: CO_E_FAILEDTOIMPERSONATE
//
// MessageText:
//
// Unable to impersonate DCOM client
//
#define
CO_E_FAILEDTOIMPERSONATE
_HRESULT_TYPEDEF_(0x80010123L)
//
// MessageId: CO_E_FAILEDTOGETSECCTX
//
// MessageText:
//
// Unable to obtain server's security context
//
#define
CO_E_FAILEDTOGETSECCTX
_HRESULT_TYPEDEF_(0x80010124L)
//
// MessageId: CO_E_FAILEDTOOPENTHREADTOKEN
//
// MessageText:
//
// Unable to open the access token of the current thread
//
#define
CO_E_FAILEDTOOPENTHREADTOKEN
_HRESULT_TYPEDEF_(0x80010125L)
//
// MessageId: CO_E_FAILEDTOGETTOKENINFO
//
// MessageText:
//
// Unable to obtain user info from an access token
//
#define
CO_E_FAILEDTOGETTOKENINFO
_HRESULT_TYPEDEF_(0x80010126L)
//
// MessageId: CO_E_TRUSTEEDOESNTMATCHCLIENT
//
// MessageText:
//
// The client who called IAccessControl::IsAccessPermitted was not the
trustee provided to the method
//
#define CO_E_TRUSTEEDOESNTMATCHCLIENT
_HRESULT_TYPEDEF_(0x80010127L)
//
// MessageId: CO_E_FAILEDTOQUERYCLIENTBLANKET
//
// MessageText:
//
// Unable to obtain the client's security blanket
//
#define CO_E_FAILEDTOQUERYCLIENTBLANKET
_HRESULT_TYPEDEF_(0x80010128L)
//
// MessageId: CO_E_FAILEDTOSETDACL
//
// MessageText:
//
// Unable to set a discretionary ACL into a security descriptor
//
#define
CO_E_FAILEDTOSETDACL
_HRESULT_TYPEDEF_(0x80010129L)
//
// MessageId: CO_E_ACCESSCHECKFAILED
//
// MessageText:
//
// The system function, AccessCheck, returned false
//
#define
CO_E_ACCESSCHECKFAILED
_HRESULT_TYPEDEF_(0x8001012AL)
//
// MessageId: CO_E_NETACCESSAPIFAILED
//
// MessageText:
//
// Either NetAccessDel or NetAccessAdd returned an error code.
//
#define
CO_E_NETACCESSAPIFAILED
_HRESULT_TYPEDEF_(0x8001012BL)
//
// MessageId: CO_E_WRONGTRUSTEENAMESYNTAX
//
// MessageText:
//
//
One of the trustee strings provided by the user did not conform to the
<Domain>\<Name> syntax and it was not the
"*" string
//
#define
CO_E_WRONGTRUSTEENAMESYNTAX
_HRESULT_TYPEDEF_(0x8001012CL)
//
// MessageId: CO_E_INVALIDSID
//
// MessageText:
//
// One of the security identifiers provided by the user was invalid
//
#define
CO_E_INVALIDSID
_HRESULT_TYPEDEF_(0x8001012DL)
//
// MessageId: CO_E_CONVERSIONFAILED
//
// MessageText:
//
// Unable to convert a wide character trustee string to a multibyte
trustee string
//
#define
CO_E_CONVERSIONFAILED
_HRESULT_TYPEDEF_(0x8001012EL)
//
// MessageId: CO_E_NOMATCHINGSIDFOUND
//
// MessageText:
//
// Unable to find a security identifier that corresponds to a trustee
string provided by the user
//
#define
CO_E_NOMATCHINGSIDFOUND
_HRESULT_TYPEDEF_(0x8001012FL)
//
// MessageId: CO_E_LOOKUPACCSIDFAILED
//
// MessageText:
//
// The system function, LookupAccountSID, failed
//
#define
CO_E_LOOKUPACCSIDFAILED
_HRESULT_TYPEDEF_(0x80010130L)
//
// MessageId: CO_E_NOMATCHINGNAMEFOUND
//
// MessageText:
//
// Unable to find a trustee name that corresponds to a security
identifier provided by the user
//
#define
CO_E_NOMATCHINGNAMEFOUND
_HRESULT_TYPEDEF_(0x80010131L)
//
// MessageId: CO_E_LOOKUPACCNAMEFAILED
//
// MessageText:
//
// The system function, LookupAccountName, failed
//
#define
CO_E_LOOKUPACCNAMEFAILED
_HRESULT_TYPEDEF_(0x80010132L)
//
// MessageId: CO_E_SETSERLHNDLFAILED
//
// MessageText:
//
// Unable to set or reset a serialization handle
//
#define
CO_E_SETSERLHNDLFAILED
_HRESULT_TYPEDEF_(0x80010133L)
//
// MessageId: CO_E_FAILEDTOGETWINDIR
//
// MessageText:
//
// Unable to obtain the Windows directory
//
#define
CO_E_FAILEDTOGETWINDIR
_HRESULT_TYPEDEF_(0x80010134L)
//
// MessageId: CO_E_PATHTOOLONG
//
// MessageText:
//
// Path too long
//
#define
CO_E_PATHTOOLONG
_HRESULT_TYPEDEF_(0x80010135L)
//
// MessageId: CO_E_FAILEDTOGENUUID
//
// MessageText:
//
// Unable to generate a uuid.
//
#define
CO_E_FAILEDTOGENUUID
_HRESULT_TYPEDEF_(0x80010136L)
//
// MessageId: CO_E_FAILEDTOCREATEFILE
//
// MessageText:
//
// Unable to create file
//
#define
CO_E_FAILEDTOCREATEFILE
_HRESULT_TYPEDEF_(0x80010137L)
//
// MessageId: CO_E_FAILEDTOCLOSEHANDLE
//
// MessageText:
//
// Unable to close a serialization handle or a file handle.
//
#define
CO_E_FAILEDTOCLOSEHANDLE
_HRESULT_TYPEDEF_(0x80010138L)
//
// MessageId: CO_E_EXCEEDSYSACLLIMIT
//
// MessageText:
//
// The number of ACEs in an ACL exceeds the system limit.
//
#define
CO_E_EXCEEDSYSACLLIMIT
_HRESULT_TYPEDEF_(0x80010139L)
//
// MessageId: CO_E_ACESINWRONGORDER
//
// MessageText:
//
// Not all the DENY_ACCESS ACEs are arranged in front of the
GRANT_ACCESS ACEs in the stream.
//
#define
CO_E_ACESINWRONGORDER
_HRESULT_TYPEDEF_(0x8001013AL)
//
// MessageId: CO_E_INCOMPATIBLESTREAMVERSION
//
// MessageText:
//
// The version of ACL format in the stream is not supported by this
implementation of IAccessControl
//
#define CO_E_INCOMPATIBLESTREAMVERSION
_HRESULT_TYPEDEF_(0x8001013BL)
//
// MessageId: CO_E_FAILEDTOOPENPROCESSTOKEN
//
// MessageText:
//
// Unable to open the access token of the server process
//
#define CO_E_FAILEDTOOPENPROCESSTOKEN
_HRESULT_TYPEDEF_(0x8001013CL)
//
// MessageId: CO_E_DECODEFAILED
//
// MessageText:
//
// Unable to decode the ACL in the stream provided by the user
//
#define
CO_E_DECODEFAILED
_HRESULT_TYPEDEF_(0x8001013DL)
//
// MessageId: CO_E_ACNOTINITIALIZED
//
// MessageText:
//
// The COM IAccessControl object is not initialized
//
#define
CO_E_ACNOTINITIALIZED
_HRESULT_TYPEDEF_(0x8001013FL)
//
// MessageId: CO_E_CANCEL_DISABLED
//
// MessageText:
//
// Call Cancellation is disabled
//
#define
CO_E_CANCEL_DISABLED
_HRESULT_TYPEDEF_(0x80010140L)
//
// MessageId: RPC_E_UNEXPECTED
//
// MessageText:
//
// An internal error occurred.
//
#define
RPC_E_UNEXPECTED
_HRESULT_TYPEDEF_(0x8001FFFFL)
//////////////////////////////////////
//
//
// Additional Security Status Codes //
//
//
//
Facility=Security
//
//
//
//////////////////////////////////////
//
// MessageId: ERROR_AUDITING_DISABLED
//
// MessageText:
//
// The specified event is currently not being audited.
//
#define
ERROR_AUDITING_DISABLED
_HRESULT_TYPEDEF_(0xC0090001L)
//
// MessageId: ERROR_ALL_SIDS_FILTERED
//
// MessageText:
//
// The SID filtering operation removed all SIDs.
//
#define
ERROR_ALL_SIDS_FILTERED
_HRESULT_TYPEDEF_(0xC0090002L)
//
// MessageId: ERROR_BIZRULES_NOT_ENABLED
//
// MessageText:
//
// Business rule scripts are disabled for the calling application.
//
#define
ERROR_BIZRULES_NOT_ENABLED
_HRESULT_TYPEDEF_(0xC0090003L)
/////////////////////////////////////////////
//
//
// end of Additional Security Status Codes //
//
//
/////////////////////////////////////////////
/////////////////
//
// FACILITY_SSPI
//
/////////////////
//
// MessageId: NTE_BAD_UID
//
// MessageText:
//
// Bad UID.
//
#define
NTE_BAD_UID
_HRESULT_TYPEDEF_(0x80090001L)
//
// MessageId: NTE_BAD_HASH
//
// MessageText:
//
// Bad Hash.
//
#define
NTE_BAD_HASH
_HRESULT_TYPEDEF_(0x80090002L)
//
// MessageId: NTE_BAD_KEY
//
// MessageText:
//
// Bad Key.
//
#define
NTE_BAD_KEY
_HRESULT_TYPEDEF_(0x80090003L)
//
// MessageId: NTE_BAD_LEN
//
// MessageText:
//
// Bad Length.
//
#define
NTE_BAD_LEN
_HRESULT_TYPEDEF_(0x80090004L)
//
// MessageId: NTE_BAD_DATA
//
// MessageText:
//
// Bad Data.
//
#define
NTE_BAD_DATA
_HRESULT_TYPEDEF_(0x80090005L)
//
// MessageId: NTE_BAD_SIGNATURE
//
// MessageText:
//
// Invalid Signature.
//
#define
NTE_BAD_SIGNATURE
_HRESULT_TYPEDEF_(0x80090006L)
//
// MessageId: NTE_BAD_VER
//
// MessageText:
//
// Bad Version of provider.
//
#define
NTE_BAD_VER
_HRESULT_TYPEDEF_(0x80090007L)
//
// MessageId: NTE_BAD_ALGID
//
// MessageText:
//
// Invalid algorithm specified.
//
#define
NTE_BAD_ALGID
_HRESULT_TYPEDEF_(0x80090008L)
//
// MessageId: NTE_BAD_FLAGS
//
// MessageText:
//
// Invalid flags specified.
//
#define
NTE_BAD_FLAGS
_HRESULT_TYPEDEF_(0x80090009L)
//
// MessageId: NTE_BAD_TYPE
//
// MessageText:
//
// Invalid type specified.
//
#define
NTE_BAD_TYPE
_HRESULT_TYPEDEF_(0x8009000AL)
//
// MessageId: NTE_BAD_KEY_STATE
//
// MessageText:
//
// Key not valid for use in specified state.
//
#define
NTE_BAD_KEY_STATE
_HRESULT_TYPEDEF_(0x8009000BL)
//
// MessageId: NTE_BAD_HASH_STATE
//
// MessageText:
//
// Hash not valid for use in specified state.
//
#define
NTE_BAD_HASH_STATE
_HRESULT_TYPEDEF_(0x8009000CL)
//
// MessageId: NTE_NO_KEY
//
// MessageText:
//
// Key does not exist.
//
#define
NTE_NO_KEY
_HRESULT_TYPEDEF_(0x8009000DL)
//
// MessageId: NTE_NO_MEMORY
//
// MessageText:
//
// Insufficient memory available for the operation.
//
#define
NTE_NO_MEMORY
_HRESULT_TYPEDEF_(0x8009000EL)
//
// MessageId: NTE_EXISTS
//
// MessageText:
//
// Object already exists.
//
#define
NTE_EXISTS
_HRESULT_TYPEDEF_(0x8009000FL)
//
// MessageId: NTE_PERM
//
// MessageText:
//
// Access denied.
//
#define
NTE_PERM
_HRESULT_TYPEDEF_(0x80090010L)
//
// MessageId: NTE_NOT_FOUND
//
// MessageText:
//
// Object was not found.
//
#define
NTE_NOT_FOUND
_HRESULT_TYPEDEF_(0x80090011L)
//
// MessageId: NTE_DOUBLE_ENCRYPT
//
// MessageText:
//
// Data already encrypted.
//
#define
NTE_DOUBLE_ENCRYPT
_HRESULT_TYPEDEF_(0x80090012L)
//
// MessageId: NTE_BAD_PROVIDER
//
// MessageText:
//
// Invalid provider specified.
//
#define
NTE_BAD_PROVIDER
_HRESULT_TYPEDEF_(0x80090013L)
//
// MessageId: NTE_BAD_PROV_TYPE
//
// MessageText:
//
// Invalid provider type specified.
//
#define
NTE_BAD_PROV_TYPE
_HRESULT_TYPEDEF_(0x80090014L)
//
// MessageId: NTE_BAD_PUBLIC_KEY
//
// MessageText:
//
// Provider's public key is invalid.
//
#define
NTE_BAD_PUBLIC_KEY
_HRESULT_TYPEDEF_(0x80090015L)
//
// MessageId: NTE_BAD_KEYSET
//
// MessageText:
//
// Keyset does not exist
//
#define
NTE_BAD_KEYSET
_HRESULT_TYPEDEF_(0x80090016L)
//
// MessageId: NTE_PROV_TYPE_NOT_DEF
//
// MessageText:
//
// Provider type not defined.
//
#define
NTE_PROV_TYPE_NOT_DEF
_HRESULT_TYPEDEF_(0x80090017L)
//
// MessageId: NTE_PROV_TYPE_ENTRY_BAD
//
// MessageText:
//
// Provider type as registered is invalid.
//
#define
NTE_PROV_TYPE_ENTRY_BAD
_HRESULT_TYPEDEF_(0x80090018L)
//
// MessageId: NTE_KEYSET_NOT_DEF
//
// MessageText:
//
// The keyset is not defined.
//
#define
NTE_KEYSET_NOT_DEF
_HRESULT_TYPEDEF_(0x80090019L)
//
// MessageId: NTE_KEYSET_ENTRY_BAD
//
// MessageText:
//
// Keyset as registered is invalid.
//
#define
NTE_KEYSET_ENTRY_BAD
_HRESULT_TYPEDEF_(0x8009001AL)
//
// MessageId: NTE_PROV_TYPE_NO_MATCH
//
// MessageText:
//
// Provider type does not match registered value.
//
#define
NTE_PROV_TYPE_NO_MATCH
_HRESULT_TYPEDEF_(0x8009001BL)
//
// MessageId: NTE_SIGNATURE_FILE_BAD
//
// MessageText:
//
// The digital signature file is corrupt.
//
#define
NTE_SIGNATURE_FILE_BAD
_HRESULT_TYPEDEF_(0x8009001CL)
//
// MessageId: NTE_PROVIDER_DLL_FAIL
//
// MessageText:
//
// Provider DLL failed to initialize correctly.
//
#define
NTE_PROVIDER_DLL_FAIL
_HRESULT_TYPEDEF_(0x8009001DL)
//
// MessageId: NTE_PROV_DLL_NOT_FOUND
//
// MessageText:
//
// Provider DLL could not be found.
//
#define
NTE_PROV_DLL_NOT_FOUND
_HRESULT_TYPEDEF_(0x8009001EL)
//
// MessageId: NTE_BAD_KEYSET_PARAM
//
// MessageText:
//
// The Keyset parameter is invalid.
//
#define
NTE_BAD_KEYSET_PARAM
_HRESULT_TYPEDEF_(0x8009001FL)
//
// MessageId: NTE_FAIL
//
// MessageText:
//
// An internal error occurred.
//
#define
NTE_FAIL
_HRESULT_TYPEDEF_(0x80090020L)
//
// MessageId: NTE_SYS_ERR
//
// MessageText:
//
// A base error occurred.
//
#define
NTE_SYS_ERR
_HRESULT_TYPEDEF_(0x80090021L)
//
// MessageId: NTE_SILENT_CONTEXT
//
// MessageText:
//
// Provider could not perform the action since the context was acquired
as silent.
//
#define
NTE_SILENT_CONTEXT
_HRESULT_TYPEDEF_(0x80090022L)
//
// MessageId: NTE_TOKEN_KEYSET_STORAGE_FULL
//
// MessageText:
//
// The security token does not have storage space available for an
additional container.
//
#define NTE_TOKEN_KEYSET_STORAGE_FULL
_HRESULT_TYPEDEF_(0x80090023L)
//
// MessageId: NTE_TEMPORARY_PROFILE
//
// MessageText:
//
// The profile for the user is a temporary profile.
//
#define
NTE_TEMPORARY_PROFILE
_HRESULT_TYPEDEF_(0x80090024L)
//
// MessageId: NTE_FIXEDPARAMETER
//
// MessageText:
//
// The key parameters could not be set because the CSP uses fixed
parameters.
//
#define
NTE_FIXEDPARAMETER
_HRESULT_TYPEDEF_(0x80090025L)
//
// MessageId: NTE_INVALID_HANDLE
//
// MessageText:
//
// The supplied handle is invalid.
//
#define
NTE_INVALID_HANDLE
_HRESULT_TYPEDEF_(0x80090026L)
//
// MessageId: NTE_INVALID_PARAMETER
//
// MessageText:
//
// The parameter is incorrect.
//
#define
NTE_INVALID_PARAMETER
_HRESULT_TYPEDEF_(0x80090027L)
//
// MessageId: NTE_BUFFER_TOO_SMALL
//
// MessageText:
//
// The buffer supplied to a function was too small.
//
#define
NTE_BUFFER_TOO_SMALL
_HRESULT_TYPEDEF_(0x80090028L)
//
// MessageId: NTE_NOT_SUPPORTED
//
// MessageText:
//
// The requested operation is not supported.
//
#define
NTE_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80090029L)
//
// MessageId: NTE_NO_MORE_ITEMS
//
// MessageText:
//
// No more data is available.
//
#define
NTE_NO_MORE_ITEMS
_HRESULT_TYPEDEF_(0x8009002AL)
//
// MessageId: NTE_BUFFERS_OVERLAP
//
// MessageText:
//
// The supplied buffers overlap incorrectly.
//
#define
NTE_BUFFERS_OVERLAP
_HRESULT_TYPEDEF_(0x8009002BL)
//
// MessageId: NTE_DECRYPTION_FAILURE
//
// MessageText:
//
// The specified data could not be decrypted.
//
#define
NTE_DECRYPTION_FAILURE
_HRESULT_TYPEDEF_(0x8009002CL)
//
// MessageId: NTE_INTERNAL_ERROR
//
// MessageText:
//
// An internal consistency check failed.
//
#define
NTE_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0x8009002DL)
//
// MessageId: NTE_UI_REQUIRED
//
// MessageText:
//
// This operation requires input from the user.
//
#define
NTE_UI_REQUIRED
_HRESULT_TYPEDEF_(0x8009002EL)
//
// MessageId: NTE_HMAC_NOT_SUPPORTED
//
// MessageText:
//
// The cryptographic provider does not support HMAC.
//
#define
NTE_HMAC_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x8009002FL)
//
// MessageId: SEC_E_INSUFFICIENT_MEMORY
//
// MessageText:
//
// Not enough memory is available to complete this request
//
#define
SEC_E_INSUFFICIENT_MEMORY
_HRESULT_TYPEDEF_(0x80090300L)
//
// MessageId: SEC_E_INVALID_HANDLE
//
// MessageText:
//
// The handle specified is invalid
//
#define
SEC_E_INVALID_HANDLE
_HRESULT_TYPEDEF_(0x80090301L)
//
// MessageId: SEC_E_UNSUPPORTED_FUNCTION
//
// MessageText:
//
// The function requested is not supported
//
#define
SEC_E_UNSUPPORTED_FUNCTION
_HRESULT_TYPEDEF_(0x80090302L)
//
// MessageId: SEC_E_TARGET_UNKNOWN
//
// MessageText:
//
// The specified target is unknown or unreachable
//
#define
SEC_E_TARGET_UNKNOWN
_HRESULT_TYPEDEF_(0x80090303L)
//
// MessageId: SEC_E_INTERNAL_ERROR
//
// MessageText:
//
// The Local Security Authority cannot be contacted
//
#define
SEC_E_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0x80090304L)
//
// MessageId: SEC_E_SECPKG_NOT_FOUND
//
// MessageText:
//
// The requested security package does not exist
//
#define
SEC_E_SECPKG_NOT_FOUND
_HRESULT_TYPEDEF_(0x80090305L)
//
// MessageId: SEC_E_NOT_OWNER
//
// MessageText:
//
// The caller is not the owner of the desired credentials
//
#define
SEC_E_NOT_OWNER
_HRESULT_TYPEDEF_(0x80090306L)
//
// MessageId: SEC_E_CANNOT_INSTALL
//
// MessageText:
//
// The security package failed to initialize, and cannot be installed
//
#define
SEC_E_CANNOT_INSTALL
_HRESULT_TYPEDEF_(0x80090307L)
//
// MessageId: SEC_E_INVALID_TOKEN
//
// MessageText:
//
// The token supplied to the function is invalid
//
#define
SEC_E_INVALID_TOKEN
_HRESULT_TYPEDEF_(0x80090308L)
//
// MessageId: SEC_E_CANNOT_PACK
//
// MessageText:
//
// The security package is not able to marshall the logon buffer, so
the logon attempt has failed
//
#define
SEC_E_CANNOT_PACK
_HRESULT_TYPEDEF_(0x80090309L)
//
// MessageId: SEC_E_QOP_NOT_SUPPORTED
//
// MessageText:
//
// The per-message Quality of Protection is not supported by the
security package
//
#define
SEC_E_QOP_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x8009030AL)
//
// MessageId: SEC_E_NO_IMPERSONATION
//
// MessageText:
//
// The security context does not allow impersonation of the client
//
#define
SEC_E_NO_IMPERSONATION
_HRESULT_TYPEDEF_(0x8009030BL)
//
// MessageId: SEC_E_LOGON_DENIED
//
// MessageText:
//
// The logon attempt failed
//
#define
SEC_E_LOGON_DENIED
_HRESULT_TYPEDEF_(0x8009030CL)
//
// MessageId: SEC_E_UNKNOWN_CREDENTIALS
//
// MessageText:
//
// The credentials supplied to the package were not recognized
//
#define
SEC_E_UNKNOWN_CREDENTIALS
_HRESULT_TYPEDEF_(0x8009030DL)
//
// MessageId: SEC_E_NO_CREDENTIALS
//
// MessageText:
//
// No credentials are available in the security package
//
#define
SEC_E_NO_CREDENTIALS
_HRESULT_TYPEDEF_(0x8009030EL)
//
// MessageId: SEC_E_MESSAGE_ALTERED
//
// MessageText:
//
// The message or signature supplied for verification has been altered
//
#define
SEC_E_MESSAGE_ALTERED
_HRESULT_TYPEDEF_(0x8009030FL)
//
// MessageId: SEC_E_OUT_OF_SEQUENCE
//
// MessageText:
//
// The message supplied for verification is out of sequence
//
#define
SEC_E_OUT_OF_SEQUENCE
_HRESULT_TYPEDEF_(0x80090310L)
//
// MessageId: SEC_E_NO_AUTHENTICATING_AUTHORITY
//
// MessageText:
//
// No authority could be contacted for authentication.
//
#define SEC_E_NO_AUTHENTICATING_AUTHORITY _HRESULT_TYPEDEF_(0x80090311L)
//
// MessageId: SEC_I_CONTINUE_NEEDED
//
// MessageText:
//
// The function completed successfully, but must be called again to
complete the context
//
#define
SEC_I_CONTINUE_NEEDED
_HRESULT_TYPEDEF_(0x00090312L)
//
// MessageId: SEC_I_COMPLETE_NEEDED
//
// MessageText:
//
// The function completed successfully, but CompleteToken must be called
//
#define
SEC_I_COMPLETE_NEEDED
_HRESULT_TYPEDEF_(0x00090313L)
//
// MessageId: SEC_I_COMPLETE_AND_CONTINUE
//
// MessageText:
//
// The function completed successfully, but both CompleteToken and this
function must be called to complete the context
//
#define
SEC_I_COMPLETE_AND_CONTINUE
_HRESULT_TYPEDEF_(0x00090314L)
//
// MessageId: SEC_I_LOCAL_LOGON
//
// MessageText:
//
// The logon was completed, but no network authority was available. The
logon was made using locally known information
//
#define
SEC_I_LOCAL_LOGON
_HRESULT_TYPEDEF_(0x00090315L)
//
// MessageId: SEC_E_BAD_PKGID
//
// MessageText:
//
// The requested security package does not exist
//
#define
SEC_E_BAD_PKGID
_HRESULT_TYPEDEF_(0x80090316L)
//
// MessageId: SEC_E_CONTEXT_EXPIRED
//
// MessageText:
//
// The context has expired and can no longer be used.
//
#define
SEC_E_CONTEXT_EXPIRED
_HRESULT_TYPEDEF_(0x80090317L)
//
// MessageId: SEC_I_CONTEXT_EXPIRED
//
// MessageText:
//
// The context has expired and can no longer be used.
//
#define
SEC_I_CONTEXT_EXPIRED
_HRESULT_TYPEDEF_(0x00090317L)
//
// MessageId: SEC_E_INCOMPLETE_MESSAGE
//
// MessageText:
//
// The supplied message is incomplete. The signature was not verified.
//
#define
SEC_E_INCOMPLETE_MESSAGE
_HRESULT_TYPEDEF_(0x80090318L)
//
// MessageId: SEC_E_INCOMPLETE_CREDENTIALS
//
// MessageText:
//
// The credentials supplied were not complete, and could not be
verified. The context could not be initialized.
//
#define
SEC_E_INCOMPLETE_CREDENTIALS
_HRESULT_TYPEDEF_(0x80090320L)
//
// MessageId: SEC_E_BUFFER_TOO_SMALL
//
// MessageText:
//
// The buffers supplied to a function was too small.
//
#define
SEC_E_BUFFER_TOO_SMALL
_HRESULT_TYPEDEF_(0x80090321L)
//
// MessageId: SEC_I_INCOMPLETE_CREDENTIALS
//
// MessageText:
//
//
The credentials supplied were not complete, and could not be verified.
Additional information can be returned from the context.
//
#define
SEC_I_INCOMPLETE_CREDENTIALS
_HRESULT_TYPEDEF_(0x00090320L)
//
// MessageId: SEC_I_RENEGOTIATE
//
// MessageText:
//
// The context data must be renegotiated with the peer.
//
#define
SEC_I_RENEGOTIATE
_HRESULT_TYPEDEF_(0x00090321L)
//
// MessageId: SEC_E_WRONG_PRINCIPAL
//
// MessageText:
//
// The target principal name is incorrect.
//
#define
SEC_E_WRONG_PRINCIPAL
_HRESULT_TYPEDEF_(0x80090322L)
//
// MessageId: SEC_I_NO_LSA_CONTEXT
//
// MessageText:
//
// There is no LSA mode context associated with this context.
//
#define
SEC_I_NO_LSA_CONTEXT
_HRESULT_TYPEDEF_(0x00090323L)
//
// MessageId: SEC_E_TIME_SKEW
//
// MessageText:
//
// The clocks on the client and server machines are skewed.
//
#define
SEC_E_TIME_SKEW
_HRESULT_TYPEDEF_(0x80090324L)
//
// MessageId: SEC_E_UNTRUSTED_ROOT
//
// MessageText:
//
// The certificate chain was issued by an authority that is not trusted.
//
#define
SEC_E_UNTRUSTED_ROOT
_HRESULT_TYPEDEF_(0x80090325L)
//
// MessageId: SEC_E_ILLEGAL_MESSAGE
//
// MessageText:
//
// The message received was unexpected or badly formatted.
//
#define
SEC_E_ILLEGAL_MESSAGE
_HRESULT_TYPEDEF_(0x80090326L)
//
// MessageId: SEC_E_CERT_UNKNOWN
//
// MessageText:
//
// An unknown error occurred while processing the certificate.
//
#define
SEC_E_CERT_UNKNOWN
_HRESULT_TYPEDEF_(0x80090327L)
//
// MessageId: SEC_E_CERT_EXPIRED
//
// MessageText:
//
// The received certificate has expired.
//
#define
SEC_E_CERT_EXPIRED
_HRESULT_TYPEDEF_(0x80090328L)
//
// MessageId: SEC_E_ENCRYPT_FAILURE
//
// MessageText:
//
// The specified data could not be encrypted.
//
#define
SEC_E_ENCRYPT_FAILURE
_HRESULT_TYPEDEF_(0x80090329L)
//
// MessageId: SEC_E_DECRYPT_FAILURE
//
// MessageText:
//
// The specified data could not be decrypted.
//
//
#define
SEC_E_DECRYPT_FAILURE
_HRESULT_TYPEDEF_(0x80090330L)
//
// MessageId: SEC_E_ALGORITHM_MISMATCH
//
// MessageText:
//
// The client and server cannot communicate, because they do not
possess a common algorithm.
//
#define
SEC_E_ALGORITHM_MISMATCH
_HRESULT_TYPEDEF_(0x80090331L)
//
// MessageId: SEC_E_SECURITY_QOS_FAILED
//
// MessageText:
//
//
The security context could not be established due to a failure in the
requested quality of service (e.g. mutual authentication or delegation).
//
#define
SEC_E_SECURITY_QOS_FAILED
_HRESULT_TYPEDEF_(0x80090332L)
//
// MessageId: SEC_E_UNFINISHED_CONTEXT_DELETED
//
// MessageText:
//
// A security context was deleted before the context was completed.
This is considered a logon failure.
//
#define SEC_E_UNFINISHED_CONTEXT_DELETED _HRESULT_TYPEDEF_(0x80090333L)
//
// MessageId: SEC_E_NO_TGT_REPLY
//
// MessageText:
//
// The client is trying to negotiate a context and the server requires
user-to-user but didn't send a TGT reply.
//
#define
SEC_E_NO_TGT_REPLY
_HRESULT_TYPEDEF_(0x80090334L)
//
// MessageId: SEC_E_NO_IP_ADDRESSES
//
// MessageText:
//
// Unable to accomplish the requested task because the local machine
does not have any IP addresses.
//
#define
SEC_E_NO_IP_ADDRESSES
_HRESULT_TYPEDEF_(0x80090335L)
//
// MessageId: SEC_E_WRONG_CREDENTIAL_HANDLE
//
// MessageText:
//
// The supplied credential handle does not match the credential
associated with the security context.
//
#define SEC_E_WRONG_CREDENTIAL_HANDLE
_HRESULT_TYPEDEF_(0x80090336L)
//
// MessageId: SEC_E_CRYPTO_SYSTEM_INVALID
//
// MessageText:
//
// The crypto system or checksum function is invalid because a required
function is unavailable.
//
#define
SEC_E_CRYPTO_SYSTEM_INVALID
_HRESULT_TYPEDEF_(0x80090337L)
//
// MessageId: SEC_E_MAX_REFERRALS_EXCEEDED
//
// MessageText:
//
// The number of maximum ticket referrals has been exceeded.
//
#define
SEC_E_MAX_REFERRALS_EXCEEDED
_HRESULT_TYPEDEF_(0x80090338L)
//
// MessageId: SEC_E_MUST_BE_KDC
//
// MessageText:
//
// The local machine must be a Kerberos KDC (domain controller) and it
is not.
//
#define
SEC_E_MUST_BE_KDC
_HRESULT_TYPEDEF_(0x80090339L)
//
// MessageId: SEC_E_STRONG_CRYPTO_NOT_SUPPORTED
//
// MessageText:
//
// The other end of the security negotiation is requires strong crypto
but it is not supported on the local machine.
//
#define SEC_E_STRONG_CRYPTO_NOT_SUPPORTED _HRESULT_TYPEDEF_(0x8009033AL)
//
// MessageId: SEC_E_TOO_MANY_PRINCIPALS
//
// MessageText:
//
// The KDC reply contained more than one principal name.
//
#define
SEC_E_TOO_MANY_PRINCIPALS
_HRESULT_TYPEDEF_(0x8009033BL)
//
// MessageId: SEC_E_NO_PA_DATA
//
// MessageText:
//
// Expected to find PA data for a hint of what etype to use, but it was
not found.
//
#define
SEC_E_NO_PA_DATA
_HRESULT_TYPEDEF_(0x8009033CL)
//
// MessageId: SEC_E_PKINIT_NAME_MISMATCH
//
// MessageText:
//
//
The client certificate does not contain a valid UPN, or does not match
the client name in the logon request. Please contact your administrator.
//
#define
SEC_E_PKINIT_NAME_MISMATCH
_HRESULT_TYPEDEF_(0x8009033DL)
//
// MessageId: SEC_E_SMARTCARD_LOGON_REQUIRED
//
// MessageText:
//
// Smartcard logon is required and was not used.
//
#define SEC_E_SMARTCARD_LOGON_REQUIRED
_HRESULT_TYPEDEF_(0x8009033EL)
//
// MessageId: SEC_E_SHUTDOWN_IN_PROGRESS
//
// MessageText:
//
// A system shutdown is in progress.
//
#define
SEC_E_SHUTDOWN_IN_PROGRESS
_HRESULT_TYPEDEF_(0x8009033FL)
//
// MessageId: SEC_E_KDC_INVALID_REQUEST
//
// MessageText:
//
// An invalid request was sent to the KDC.
//
#define
SEC_E_KDC_INVALID_REQUEST
_HRESULT_TYPEDEF_(0x80090340L)
//
// MessageId: SEC_E_KDC_UNABLE_TO_REFER
//
// MessageText:
//
// The KDC was unable to generate a referral for the service requested.
//
#define
SEC_E_KDC_UNABLE_TO_REFER
_HRESULT_TYPEDEF_(0x80090341L)
//
// MessageId: SEC_E_KDC_UNKNOWN_ETYPE
//
// MessageText:
//
// The encryption type requested is not supported by the KDC.
//
#define
SEC_E_KDC_UNKNOWN_ETYPE
_HRESULT_TYPEDEF_(0x80090342L)
//
// MessageId: SEC_E_UNSUPPORTED_PREAUTH
//
// MessageText:
//
// An unsupported preauthentication mechanism was presented to the
Kerberos package.
//
#define
SEC_E_UNSUPPORTED_PREAUTH
_HRESULT_TYPEDEF_(0x80090343L)
//
// MessageId: SEC_E_DELEGATION_REQUIRED
//
// MessageText:
//
//
The requested operation cannot be completed. The computer must be
trusted for delegation and the current user account must be configured
to allow delegation.
//
#define
SEC_E_DELEGATION_REQUIRED
_HRESULT_TYPEDEF_(0x80090345L)
//
// MessageId: SEC_E_BAD_BINDINGS
//
// MessageText:
//
// Client's supplied SSPI channel bindings were incorrect.
//
#define
SEC_E_BAD_BINDINGS
_HRESULT_TYPEDEF_(0x80090346L)
//
// MessageId: SEC_E_MULTIPLE_ACCOUNTS
//
// MessageText:
//
// The received certificate was mapped to multiple accounts.
//
#define
SEC_E_MULTIPLE_ACCOUNTS
_HRESULT_TYPEDEF_(0x80090347L)
//
// MessageId: SEC_E_NO_KERB_KEY
//
// MessageText:
//
// SEC_E_NO_KERB_KEY
//
#define
SEC_E_NO_KERB_KEY
_HRESULT_TYPEDEF_(0x80090348L)
//
// MessageId: SEC_E_CERT_WRONG_USAGE
//
// MessageText:
//
// The certificate is not valid for the requested usage.
//
#define
SEC_E_CERT_WRONG_USAGE
_HRESULT_TYPEDEF_(0x80090349L)
//
// MessageId: SEC_E_DOWNGRADE_DETECTED
//
// MessageText:
//
//
The system detected a possible attempt to compromise security. Please
ensure that you can contact the server that authenticated you.
//
#define
SEC_E_DOWNGRADE_DETECTED
_HRESULT_TYPEDEF_(0x80090350L)
//
// MessageId: SEC_E_SMARTCARD_CERT_REVOKED
//
// MessageText:
//
//
The smartcard certificate used for authentication has been revoked.
Please contact your system administrator. There may be additional
information in the event log.
//
#define
SEC_E_SMARTCARD_CERT_REVOKED
_HRESULT_TYPEDEF_(0x80090351L)
//
// MessageId: SEC_E_ISSUING_CA_UNTRUSTED
//
// MessageText:
//
//
An untrusted certificate authority was detected While processing the
smartcard certificate used for authentication. Please contact your
system administrator.
//
#define
SEC_E_ISSUING_CA_UNTRUSTED
_HRESULT_TYPEDEF_(0x80090352L)
//
// MessageId: SEC_E_REVOCATION_OFFLINE_C
//
// MessageText:
//
//
The revocation status of the smartcard certificate used for
authentication could not be determined. Please contact your system
administrator.
//
#define
SEC_E_REVOCATION_OFFLINE_C
_HRESULT_TYPEDEF_(0x80090353L)
//
// MessageId: SEC_E_PKINIT_CLIENT_FAILURE
//
// MessageText:
//
// The smartcard certificate used for authentication was not trusted.
Please contact your system administrator.
//
#define
SEC_E_PKINIT_CLIENT_FAILURE
_HRESULT_TYPEDEF_(0x80090354L)
//
// MessageId: SEC_E_SMARTCARD_CERT_EXPIRED
//
// MessageText:
//
// The smartcard certificate used for authentication has expired.
Please contact your system administrator.
//
#define
SEC_E_SMARTCARD_CERT_EXPIRED
_HRESULT_TYPEDEF_(0x80090355L)
//
// MessageId: SEC_E_NO_S4U_PROT_SUPPORT
//
// MessageText:
//
//
The Kerberos subsystem encountered an error. A service for user
protocol request was made against a domain controller which does not
support service for user.
//
#define
SEC_E_NO_S4U_PROT_SUPPORT
_HRESULT_TYPEDEF_(0x80090356L)
//
// MessageId: SEC_E_CROSSREALM_DELEGATION_FAILURE
//
// MessageText:
//
//
An attempt was made by this server to make a Kerberos constrained
delegation request for a target outside of the server's realm. This is
not supported, and indicates a misconfiguration on this server's
allowed to delegate to list. Please contact your administrator.
//
#define SEC_E_CROSSREALM_DELEGATION_FAILURE
_HRESULT_TYPEDEF_(0x80090357L)
//
// MessageId: SEC_E_REVOCATION_OFFLINE_KDC
//
// MessageText:
//
//
The revocation status of the domain controller certificate used for
smartcard authentication could not be determined. There is additional
information in the system event log. Please contact your system
administrator.
//
#define
SEC_E_REVOCATION_OFFLINE_KDC
_HRESULT_TYPEDEF_(0x80090358L)
//
// MessageId: SEC_E_ISSUING_CA_UNTRUSTED_KDC
//
// MessageText:
//
//
An untrusted certificate authority was detected while processing the
domain controller certificate used for authentication. There is
additional information in the system event log. Please contact your
system administrator.
//
#define SEC_E_ISSUING_CA_UNTRUSTED_KDC
_HRESULT_TYPEDEF_(0x80090359L)
//
// MessageId: SEC_E_KDC_CERT_EXPIRED
//
// MessageText:
//
//
The domain controller certificate used for smartcard logon has expired.
Please contact your system administrator with the contents of your
system event log.
//
#define
SEC_E_KDC_CERT_EXPIRED
_HRESULT_TYPEDEF_(0x8009035AL)
//
// MessageId: SEC_E_KDC_CERT_REVOKED
//
// MessageText:
//
//
The domain controller certificate used for smartcard logon has been
revoked. Please contact your system administrator with the contents of
your system event log.
//
#define
SEC_E_KDC_CERT_REVOKED
_HRESULT_TYPEDEF_(0x8009035BL)
//
// MessageId: SEC_I_SIGNATURE_NEEDED
//
// MessageText:
//
// A signature operation must be performed before the user can
authenticate.
//
#define
SEC_I_SIGNATURE_NEEDED
_HRESULT_TYPEDEF_(0x0009035CL)
//
// MessageId: SEC_E_INVALID_PARAMETER
//
// MessageText:
//
// One or more of the parameters passed to the function was invalid.
//
#define
SEC_E_INVALID_PARAMETER
_HRESULT_TYPEDEF_(0x8009035DL)
//
// MessageId: SEC_E_DELEGATION_POLICY
//
// MessageText:
//
// Client policy does not allow credential delegation to target server.
//
#define
SEC_E_DELEGATION_POLICY
_HRESULT_TYPEDEF_(0x8009035EL)
//
// MessageId: SEC_E_POLICY_NLTM_ONLY
//
// MessageText:
//
// Client policy does not allow credential delegation to target server
with NLTM only authentication.
//
#define
SEC_E_POLICY_NLTM_ONLY
_HRESULT_TYPEDEF_(0x8009035FL)
//
// MessageId: SEC_I_NO_RENEGOTIATION
//
// MessageText:
//
// The recipient rejected the renegotiation request.
//
#define
SEC_I_NO_RENEGOTIATION
_HRESULT_TYPEDEF_(0x00090360L)
//
// MessageId: SEC_E_NO_CONTEXT
//
// MessageText:
//
// The required security context does not exist.
//
#define
SEC_E_NO_CONTEXT
_HRESULT_TYPEDEF_(0x80090361L)
//
// MessageId: SEC_E_PKU2U_CERT_FAILURE
//
// MessageText:
//
// The PKU2U protocol encountered an error while attempting to utilize
the associated certificates.
//
#define
SEC_E_PKU2U_CERT_FAILURE
_HRESULT_TYPEDEF_(0x80090362L)
//
// MessageId: SEC_E_MUTUAL_AUTH_FAILED
//
// MessageText:
//
// The identity of the server computer could not be verified.
//
#define
SEC_E_MUTUAL_AUTH_FAILED
_HRESULT_TYPEDEF_(0x80090363L)
//
// Provided for backwards compatibility
//
#define
SEC_E_NO_SPM SEC_E_INTERNAL_ERROR
#define SEC_E_NOT_SUPPORTED SEC_E_UNSUPPORTED_FUNCTION
//
// MessageId: CRYPT_E_MSG_ERROR
//
// MessageText:
//
// An error occurred while performing an operation on a cryptographic
message.
//
#define
CRYPT_E_MSG_ERROR
_HRESULT_TYPEDEF_(0x80091001L)
//
// MessageId: CRYPT_E_UNKNOWN_ALGO
//
// MessageText:
//
// Unknown cryptographic algorithm.
//
#define
CRYPT_E_UNKNOWN_ALGO
_HRESULT_TYPEDEF_(0x80091002L)
//
// MessageId: CRYPT_E_OID_FORMAT
//
// MessageText:
//
// The object identifier is poorly formatted.
//
#define
CRYPT_E_OID_FORMAT
_HRESULT_TYPEDEF_(0x80091003L)
//
// MessageId: CRYPT_E_INVALID_MSG_TYPE
//
// MessageText:
//
// Invalid cryptographic message type.
//
#define
CRYPT_E_INVALID_MSG_TYPE
_HRESULT_TYPEDEF_(0x80091004L)
//
// MessageId: CRYPT_E_UNEXPECTED_ENCODING
//
// MessageText:
//
// Unexpected cryptographic message encoding.
//
#define
CRYPT_E_UNEXPECTED_ENCODING
_HRESULT_TYPEDEF_(0x80091005L)
//
// MessageId: CRYPT_E_AUTH_ATTR_MISSING
//
// MessageText:
//
// The cryptographic message does not contain an expected authenticated
attribute.
//
#define
CRYPT_E_AUTH_ATTR_MISSING
_HRESULT_TYPEDEF_(0x80091006L)
//
// MessageId: CRYPT_E_HASH_VALUE
//
// MessageText:
//
// The hash value is not correct.
//
#define
CRYPT_E_HASH_VALUE
_HRESULT_TYPEDEF_(0x80091007L)
//
// MessageId: CRYPT_E_INVALID_INDEX
//
// MessageText:
//
// The index value is not valid.
//
#define
CRYPT_E_INVALID_INDEX
_HRESULT_TYPEDEF_(0x80091008L)
//
// MessageId: CRYPT_E_ALREADY_DECRYPTED
//
// MessageText:
//
// The content of the cryptographic message has already been decrypted.
//
#define
CRYPT_E_ALREADY_DECRYPTED
_HRESULT_TYPEDEF_(0x80091009L)
//
// MessageId: CRYPT_E_NOT_DECRYPTED
//
// MessageText:
//
// The content of the cryptographic message has not been decrypted yet.
//
#define
CRYPT_E_NOT_DECRYPTED
_HRESULT_TYPEDEF_(0x8009100AL)
//
// MessageId: CRYPT_E_RECIPIENT_NOT_FOUND
//
// MessageText:
//
// The enveloped-data message does not contain the specified recipient.
//
#define
CRYPT_E_RECIPIENT_NOT_FOUND
_HRESULT_TYPEDEF_(0x8009100BL)
//
// MessageId: CRYPT_E_CONTROL_TYPE
//
// MessageText:
//
// Invalid control type.
//
#define
CRYPT_E_CONTROL_TYPE
_HRESULT_TYPEDEF_(0x8009100CL)
//
// MessageId: CRYPT_E_ISSUER_SERIALNUMBER
//
// MessageText:
//
// Invalid issuer and/or serial number.
//
#define
CRYPT_E_ISSUER_SERIALNUMBER
_HRESULT_TYPEDEF_(0x8009100DL)
//
// MessageId: CRYPT_E_SIGNER_NOT_FOUND
//
// MessageText:
//
// Cannot find the original signer.
//
#define
CRYPT_E_SIGNER_NOT_FOUND
_HRESULT_TYPEDEF_(0x8009100EL)
//
// MessageId: CRYPT_E_ATTRIBUTES_MISSING
//
// MessageText:
//
// The cryptographic message does not contain all of the requested
attributes.
//
#define
CRYPT_E_ATTRIBUTES_MISSING
_HRESULT_TYPEDEF_(0x8009100FL)
//
// MessageId: CRYPT_E_STREAM_MSG_NOT_READY
//
// MessageText:
//
// The streamed cryptographic message is not ready to return data.
//
#define
CRYPT_E_STREAM_MSG_NOT_READY
_HRESULT_TYPEDEF_(0x80091010L)
//
// MessageId: CRYPT_E_STREAM_INSUFFICIENT_DATA
//
// MessageText:
//
// The streamed cryptographic message requires more data to complete
the decode operation.
//
#define CRYPT_E_STREAM_INSUFFICIENT_DATA _HRESULT_TYPEDEF_(0x80091011L)
//
// MessageId: CRYPT_I_NEW_PROTECTION_REQUIRED
//
// MessageText:
//
// The protected data needs to be re-protected.
//
#define CRYPT_I_NEW_PROTECTION_REQUIRED
_HRESULT_TYPEDEF_(0x00091012L)
//
// MessageId: CRYPT_E_BAD_LEN
//
// MessageText:
//
// The length specified for the output data was insufficient.
//
#define
CRYPT_E_BAD_LEN
_HRESULT_TYPEDEF_(0x80092001L)
//
// MessageId: CRYPT_E_BAD_ENCODE
//
// MessageText:
//
// An error occurred during encode or decode operation.
//
#define
CRYPT_E_BAD_ENCODE
_HRESULT_TYPEDEF_(0x80092002L)
//
// MessageId: CRYPT_E_FILE_ERROR
//
// MessageText:
//
// An error occurred while reading or writing to a file.
//
#define
CRYPT_E_FILE_ERROR
_HRESULT_TYPEDEF_(0x80092003L)
//
// MessageId: CRYPT_E_NOT_FOUND
//
// MessageText:
//
// Cannot find object or property.
//
#define
CRYPT_E_NOT_FOUND
_HRESULT_TYPEDEF_(0x80092004L)
//
// MessageId: CRYPT_E_EXISTS
//
// MessageText:
//
// The object or property already exists.
//
#define
CRYPT_E_EXISTS
_HRESULT_TYPEDEF_(0x80092005L)
//
// MessageId: CRYPT_E_NO_PROVIDER
//
// MessageText:
//
// No provider was specified for the store or object.
//
#define
CRYPT_E_NO_PROVIDER
_HRESULT_TYPEDEF_(0x80092006L)
//
// MessageId: CRYPT_E_SELF_SIGNED
//
// MessageText:
//
// The specified certificate is self signed.
//
#define
CRYPT_E_SELF_SIGNED
_HRESULT_TYPEDEF_(0x80092007L)
//
// MessageId: CRYPT_E_DELETED_PREV
//
// MessageText:
//
// The previous certificate or CRL context was deleted.
//
#define
CRYPT_E_DELETED_PREV
_HRESULT_TYPEDEF_(0x80092008L)
//
// MessageId: CRYPT_E_NO_MATCH
//
// MessageText:
//
// Cannot find the requested object.
//
#define
CRYPT_E_NO_MATCH
_HRESULT_TYPEDEF_(0x80092009L)
//
// MessageId: CRYPT_E_UNEXPECTED_MSG_TYPE
//
// MessageText:
//
// The certificate does not have a property that references a private
key.
//
#define
CRYPT_E_UNEXPECTED_MSG_TYPE
_HRESULT_TYPEDEF_(0x8009200AL)
//
// MessageId: CRYPT_E_NO_KEY_PROPERTY
//
// MessageText:
//
// Cannot find the certificate and private key for decryption.
//
#define
CRYPT_E_NO_KEY_PROPERTY
_HRESULT_TYPEDEF_(0x8009200BL)
//
// MessageId: CRYPT_E_NO_DECRYPT_CERT
//
// MessageText:
//
// Cannot find the certificate and private key to use for decryption.
//
#define
CRYPT_E_NO_DECRYPT_CERT
_HRESULT_TYPEDEF_(0x8009200CL)
//
// MessageId: CRYPT_E_BAD_MSG
//
// MessageText:
//
// Not a cryptographic message or the cryptographic message is not
formatted correctly.
//
#define
CRYPT_E_BAD_MSG
_HRESULT_TYPEDEF_(0x8009200DL)
//
// MessageId: CRYPT_E_NO_SIGNER
//
// MessageText:
//
// The signed cryptographic message does not have a signer for the
specified signer index.
//
#define
CRYPT_E_NO_SIGNER
_HRESULT_TYPEDEF_(0x8009200EL)
//
// MessageId: CRYPT_E_PENDING_CLOSE
//
// MessageText:
//
// Final closure is pending until additional frees or closes.
//
#define
CRYPT_E_PENDING_CLOSE
_HRESULT_TYPEDEF_(0x8009200FL)
//
// MessageId: CRYPT_E_REVOKED
//
// MessageText:
//
// The certificate is revoked.
//
#define
CRYPT_E_REVOKED
_HRESULT_TYPEDEF_(0x80092010L)
//
// MessageId: CRYPT_E_NO_REVOCATION_DLL
//
// MessageText:
//
// No Dll or exported function was found to verify revocation.
//
#define
CRYPT_E_NO_REVOCATION_DLL
_HRESULT_TYPEDEF_(0x80092011L)
//
// MessageId: CRYPT_E_NO_REVOCATION_CHECK
//
// MessageText:
//
// The revocation function was unable to check revocation for the
certificate.
//
#define
CRYPT_E_NO_REVOCATION_CHECK
_HRESULT_TYPEDEF_(0x80092012L)
//
// MessageId: CRYPT_E_REVOCATION_OFFLINE
//
// MessageText:
//
// The revocation function was unable to check revocation because the
revocation server was offline.
//
#define
CRYPT_E_REVOCATION_OFFLINE
_HRESULT_TYPEDEF_(0x80092013L)
//
// MessageId: CRYPT_E_NOT_IN_REVOCATION_DATABASE
//
// MessageText:
//
// The certificate is not in the revocation server's database.
//
#define CRYPT_E_NOT_IN_REVOCATION_DATABASE
_HRESULT_TYPEDEF_(0x80092014L)
//
// MessageId: CRYPT_E_INVALID_NUMERIC_STRING
//
// MessageText:
//
// The string contains a non-numeric character.
//
#define CRYPT_E_INVALID_NUMERIC_STRING
_HRESULT_TYPEDEF_(0x80092020L)
//
// MessageId: CRYPT_E_INVALID_PRINTABLE_STRING
//
// MessageText:
//
// The string contains a non-printable character.
//
#define CRYPT_E_INVALID_PRINTABLE_STRING _HRESULT_TYPEDEF_(0x80092021L)
//
// MessageId: CRYPT_E_INVALID_IA5_STRING
//
// MessageText:
//
// The string contains a character not in the 7 bit ASCII character set.
//
#define
CRYPT_E_INVALID_IA5_STRING
_HRESULT_TYPEDEF_(0x80092022L)
//
// MessageId: CRYPT_E_INVALID_X500_STRING
//
// MessageText:
//
// The string contains an invalid X500 name attribute key, oid, value
or delimiter.
//
#define
CRYPT_E_INVALID_X500_STRING
_HRESULT_TYPEDEF_(0x80092023L)
//
// MessageId: CRYPT_E_NOT_CHAR_STRING
//
// MessageText:
//
//
The dwValueType for the CERT_NAME_VALUE is not one of the character
strings. Most likely it is either a CERT_RDN_ENCODED_BLOB or
CERT_TDN_OCTED_STRING.
//
#define
CRYPT_E_NOT_CHAR_STRING
_HRESULT_TYPEDEF_(0x80092024L)
//
// MessageId: CRYPT_E_FILERESIZED
//
// MessageText:
//
//
The Put operation cannot continue. The file needs to be resized.
However, there is already a signature present. A complete signing
operation must be done.
//
#define
CRYPT_E_FILERESIZED
_HRESULT_TYPEDEF_(0x80092025L)
//
// MessageId: CRYPT_E_SECURITY_SETTINGS
//
// MessageText:
//
// The cryptographic operation failed due to a local security option
setting.
//
#define
CRYPT_E_SECURITY_SETTINGS
_HRESULT_TYPEDEF_(0x80092026L)
//
// MessageId: CRYPT_E_NO_VERIFY_USAGE_DLL
//
// MessageText:
//
// No DLL or exported function was found to verify subject usage.
//
#define
CRYPT_E_NO_VERIFY_USAGE_DLL
_HRESULT_TYPEDEF_(0x80092027L)
//
// MessageId: CRYPT_E_NO_VERIFY_USAGE_CHECK
//
// MessageText:
//
// The called function was unable to do a usage check on the subject.
//
#define CRYPT_E_NO_VERIFY_USAGE_CHECK
_HRESULT_TYPEDEF_(0x80092028L)
//
// MessageId: CRYPT_E_VERIFY_USAGE_OFFLINE
//
// MessageText:
//
// Since the server was offline, the called function was unable to
complete the usage check.
//
#define
CRYPT_E_VERIFY_USAGE_OFFLINE
_HRESULT_TYPEDEF_(0x80092029L)
//
// MessageId: CRYPT_E_NOT_IN_CTL
//
// MessageText:
//
// The subject was not found in a Certificate Trust List (CTL).
//
#define
CRYPT_E_NOT_IN_CTL
_HRESULT_TYPEDEF_(0x8009202AL)
//
// MessageId: CRYPT_E_NO_TRUSTED_SIGNER
//
// MessageText:
//
// None of the signers of the cryptographic message or certificate
trust list is trusted.
//
#define
CRYPT_E_NO_TRUSTED_SIGNER
_HRESULT_TYPEDEF_(0x8009202BL)
//
// MessageId: CRYPT_E_MISSING_PUBKEY_PARA
//
// MessageText:
//
// The public key's algorithm parameters are missing.
//
#define
CRYPT_E_MISSING_PUBKEY_PARA
_HRESULT_TYPEDEF_(0x8009202CL)
//
// MessageId: CRYPT_E_OSS_ERROR
//
// MessageText:
//
// OSS Certificate encode/decode error code base
//
// See asn1code.h for a definition of the OSS runtime errors. The OSS
error values are offset by CRYPT_E_OSS_ERROR.
//
#define
CRYPT_E_OSS_ERROR
_HRESULT_TYPEDEF_(0x80093000L)
//
// MessageId: OSS_MORE_BUF
//
// MessageText:
//
// OSS ASN.1 Error: Output Buffer is too small.
//
#define
OSS_MORE_BUF
_HRESULT_TYPEDEF_(0x80093001L)
//
// MessageId: OSS_NEGATIVE_UINTEGER
//
// MessageText:
//
// OSS ASN.1 Error: Signed integer is encoded as a unsigned integer.
//
#define
OSS_NEGATIVE_UINTEGER
_HRESULT_TYPEDEF_(0x80093002L)
//
// MessageId: OSS_PDU_RANGE
//
// MessageText:
//
// OSS ASN.1 Error: Unknown ASN.1 data type.
//
#define
OSS_PDU_RANGE
_HRESULT_TYPEDEF_(0x80093003L)
//
// MessageId: OSS_MORE_INPUT
//
// MessageText:
//
// OSS ASN.1 Error: Output buffer is too small, the decoded data has
been truncated.
//
#define
OSS_MORE_INPUT
_HRESULT_TYPEDEF_(0x80093004L)
//
// MessageId: OSS_DATA_ERROR
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_DATA_ERROR
_HRESULT_TYPEDEF_(0x80093005L)
//
// MessageId: OSS_BAD_ARG
//
// MessageText:
//
// OSS ASN.1 Error: Invalid argument.
//
#define
OSS_BAD_ARG
_HRESULT_TYPEDEF_(0x80093006L)
//
// MessageId: OSS_BAD_VERSION
//
// MessageText:
//
// OSS ASN.1 Error: Encode/Decode version mismatch.
//
#define
OSS_BAD_VERSION
_HRESULT_TYPEDEF_(0x80093007L)
//
// MessageId: OSS_OUT_MEMORY
//
// MessageText:
//
// OSS ASN.1 Error: Out of memory.
//
#define
OSS_OUT_MEMORY
_HRESULT_TYPEDEF_(0x80093008L)
//
// MessageId: OSS_PDU_MISMATCH
//
// MessageText:
//
// OSS ASN.1 Error: Encode/Decode Error.
//
#define
OSS_PDU_MISMATCH
_HRESULT_TYPEDEF_(0x80093009L)
//
// MessageId: OSS_LIMITED
//
// MessageText:
//
// OSS ASN.1 Error: Internal Error.
//
#define
OSS_LIMITED
_HRESULT_TYPEDEF_(0x8009300AL)
//
// MessageId: OSS_BAD_PTR
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_BAD_PTR
_HRESULT_TYPEDEF_(0x8009300BL)
//
// MessageId: OSS_BAD_TIME
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_BAD_TIME
_HRESULT_TYPEDEF_(0x8009300CL)
//
// MessageId: OSS_INDEFINITE_NOT_SUPPORTED
//
// MessageText:
//
// OSS ASN.1 Error: Unsupported BER indefinite-length encoding.
//
#define
OSS_INDEFINITE_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x8009300DL)
//
// MessageId: OSS_MEM_ERROR
//
// MessageText:
//
// OSS ASN.1 Error: Access violation.
//
#define
OSS_MEM_ERROR
_HRESULT_TYPEDEF_(0x8009300EL)
//
// MessageId: OSS_BAD_TABLE
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_BAD_TABLE
_HRESULT_TYPEDEF_(0x8009300FL)
//
// MessageId: OSS_TOO_LONG
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_TOO_LONG
_HRESULT_TYPEDEF_(0x80093010L)
//
// MessageId: OSS_CONSTRAINT_VIOLATED
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_CONSTRAINT_VIOLATED
_HRESULT_TYPEDEF_(0x80093011L)
//
// MessageId: OSS_FATAL_ERROR
//
// MessageText:
//
// OSS ASN.1 Error: Internal Error.
//
#define
OSS_FATAL_ERROR
_HRESULT_TYPEDEF_(0x80093012L)
//
// MessageId: OSS_ACCESS_SERIALIZATION_ERROR
//
// MessageText:
//
// OSS ASN.1 Error: Multi-threading conflict.
//
#define OSS_ACCESS_SERIALIZATION_ERROR
_HRESULT_TYPEDEF_(0x80093013L)
//
// MessageId: OSS_NULL_TBL
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_NULL_TBL
_HRESULT_TYPEDEF_(0x80093014L)
//
// MessageId: OSS_NULL_FCN
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_NULL_FCN
_HRESULT_TYPEDEF_(0x80093015L)
//
// MessageId: OSS_BAD_ENCRULES
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_BAD_ENCRULES
_HRESULT_TYPEDEF_(0x80093016L)
//
// MessageId: OSS_UNAVAIL_ENCRULES
//
// MessageText:
//
// OSS ASN.1 Error: Encode/Decode function not implemented.
//
#define
OSS_UNAVAIL_ENCRULES
_HRESULT_TYPEDEF_(0x80093017L)
//
// MessageId: OSS_CANT_OPEN_TRACE_WINDOW
//
// MessageText:
//
// OSS ASN.1 Error: Trace file error.
//
#define
OSS_CANT_OPEN_TRACE_WINDOW
_HRESULT_TYPEDEF_(0x80093018L)
//
// MessageId: OSS_UNIMPLEMENTED
//
// MessageText:
//
// OSS ASN.1 Error: Function not implemented.
//
#define
OSS_UNIMPLEMENTED
_HRESULT_TYPEDEF_(0x80093019L)
//
// MessageId: OSS_OID_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_OID_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x8009301AL)
//
// MessageId: OSS_CANT_OPEN_TRACE_FILE
//
// MessageText:
//
// OSS ASN.1 Error: Trace file error.
//
#define
OSS_CANT_OPEN_TRACE_FILE
_HRESULT_TYPEDEF_(0x8009301BL)
//
// MessageId: OSS_TRACE_FILE_ALREADY_OPEN
//
// MessageText:
//
// OSS ASN.1 Error: Trace file error.
//
#define
OSS_TRACE_FILE_ALREADY_OPEN
_HRESULT_TYPEDEF_(0x8009301CL)
//
// MessageId: OSS_TABLE_MISMATCH
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_TABLE_MISMATCH
_HRESULT_TYPEDEF_(0x8009301DL)
//
// MessageId: OSS_TYPE_NOT_SUPPORTED
//
// MessageText:
//
// OSS ASN.1 Error: Invalid data.
//
#define
OSS_TYPE_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x8009301EL)
//
// MessageId: OSS_REAL_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_REAL_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x8009301FL)
//
// MessageId: OSS_REAL_CODE_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_REAL_CODE_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093020L)
//
// MessageId: OSS_OUT_OF_RANGE
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_OUT_OF_RANGE
_HRESULT_TYPEDEF_(0x80093021L)
//
// MessageId: OSS_COPIER_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_COPIER_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093022L)
//
// MessageId: OSS_CONSTRAINT_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define OSS_CONSTRAINT_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093023L)
//
// MessageId: OSS_COMPARATOR_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define OSS_COMPARATOR_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093024L)
//
// MessageId: OSS_COMPARATOR_CODE_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define OSS_COMPARATOR_CODE_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093025L)
//
// MessageId: OSS_MEM_MGR_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_MEM_MGR_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093026L)
//
// MessageId: OSS_PDV_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_PDV_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093027L)
//
// MessageId: OSS_PDV_CODE_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_PDV_CODE_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093028L)
//
// MessageId: OSS_API_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_API_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x80093029L)
//
// MessageId: OSS_BERDER_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_BERDER_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x8009302AL)
//
// MessageId: OSS_PER_DLL_NOT_LINKED
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_PER_DLL_NOT_LINKED
_HRESULT_TYPEDEF_(0x8009302BL)
//
// MessageId: OSS_OPEN_TYPE_ERROR
//
// MessageText:
//
// OSS ASN.1 Error: Program link error.
//
#define
OSS_OPEN_TYPE_ERROR
_HRESULT_TYPEDEF_(0x8009302CL)
//
// MessageId: OSS_MUTEX_NOT_CREATED
//
// MessageText:
//
// OSS ASN.1 Error: System resource error.
//
#define
OSS_MUTEX_NOT_CREATED
_HRESULT_TYPEDEF_(0x8009302DL)
//
// MessageId: OSS_CANT_CLOSE_TRACE_FILE
//
// MessageText:
//
// OSS ASN.1 Error: Trace file error.
//
#define
OSS_CANT_CLOSE_TRACE_FILE
_HRESULT_TYPEDEF_(0x8009302EL)
//
// MessageId: CRYPT_E_ASN1_ERROR
//
// MessageText:
//
// ASN1 Certificate encode/decode error code base. The ASN1 error
values are offset by CRYPT_E_ASN1_ERROR.
//
#define
CRYPT_E_ASN1_ERROR
_HRESULT_TYPEDEF_(0x80093100L)
//
// MessageId: CRYPT_E_ASN1_INTERNAL
//
// MessageText:
//
// ASN1 internal encode or decode error.
//
#define
CRYPT_E_ASN1_INTERNAL
_HRESULT_TYPEDEF_(0x80093101L)
//
// MessageId: CRYPT_E_ASN1_EOD
//
// MessageText:
//
// ASN1 unexpected end of data.
//
#define
CRYPT_E_ASN1_EOD
_HRESULT_TYPEDEF_(0x80093102L)
//
// MessageId: CRYPT_E_ASN1_CORRUPT
//
// MessageText:
//
// ASN1 corrupted data.
//
#define
CRYPT_E_ASN1_CORRUPT
_HRESULT_TYPEDEF_(0x80093103L)
//
// MessageId: CRYPT_E_ASN1_LARGE
//
// MessageText:
//
// ASN1 value too large.
//
#define
CRYPT_E_ASN1_LARGE
_HRESULT_TYPEDEF_(0x80093104L)
//
// MessageId: CRYPT_E_ASN1_CONSTRAINT
//
// MessageText:
//
// ASN1 constraint violated.
//
#define
CRYPT_E_ASN1_CONSTRAINT
_HRESULT_TYPEDEF_(0x80093105L)
//
// MessageId: CRYPT_E_ASN1_MEMORY
//
// MessageText:
//
// ASN1 out of memory.
//
#define
CRYPT_E_ASN1_MEMORY
_HRESULT_TYPEDEF_(0x80093106L)
//
// MessageId: CRYPT_E_ASN1_OVERFLOW
//
// MessageText:
//
// ASN1 buffer overflow.
//
#define
CRYPT_E_ASN1_OVERFLOW
_HRESULT_TYPEDEF_(0x80093107L)
//
// MessageId: CRYPT_E_ASN1_BADPDU
//
// MessageText:
//
// ASN1 function not supported for this PDU.
//
#define
CRYPT_E_ASN1_BADPDU
_HRESULT_TYPEDEF_(0x80093108L)
//
// MessageId: CRYPT_E_ASN1_BADARGS
//
// MessageText:
//
// ASN1 bad arguments to function call.
//
#define
CRYPT_E_ASN1_BADARGS
_HRESULT_TYPEDEF_(0x80093109L)
//
// MessageId: CRYPT_E_ASN1_BADREAL
//
// MessageText:
//
// ASN1 bad real value.
//
#define
CRYPT_E_ASN1_BADREAL
_HRESULT_TYPEDEF_(0x8009310AL)
//
// MessageId: CRYPT_E_ASN1_BADTAG
//
// MessageText:
//
// ASN1 bad tag value met.
//
#define
CRYPT_E_ASN1_BADTAG
_HRESULT_TYPEDEF_(0x8009310BL)
//
// MessageId: CRYPT_E_ASN1_CHOICE
//
// MessageText:
//
// ASN1 bad choice value.
//
#define
CRYPT_E_ASN1_CHOICE
_HRESULT_TYPEDEF_(0x8009310CL)
//
// MessageId: CRYPT_E_ASN1_RULE
//
// MessageText:
//
// ASN1 bad encoding rule.
//
#define
CRYPT_E_ASN1_RULE
_HRESULT_TYPEDEF_(0x8009310DL)
//
// MessageId: CRYPT_E_ASN1_UTF8
//
// MessageText:
//
// ASN1 bad unicode (UTF8).
//
#define
CRYPT_E_ASN1_UTF8
_HRESULT_TYPEDEF_(0x8009310EL)
//
// MessageId: CRYPT_E_ASN1_PDU_TYPE
//
// MessageText:
//
// ASN1 bad PDU type.
//
#define
CRYPT_E_ASN1_PDU_TYPE
_HRESULT_TYPEDEF_(0x80093133L)
//
// MessageId: CRYPT_E_ASN1_NYI
//
// MessageText:
//
// ASN1 not yet implemented.
//
#define
CRYPT_E_ASN1_NYI
_HRESULT_TYPEDEF_(0x80093134L)
//
// MessageId: CRYPT_E_ASN1_EXTENDED
//
// MessageText:
//
// ASN1 skipped unknown extension(s).
//
#define
CRYPT_E_ASN1_EXTENDED
_HRESULT_TYPEDEF_(0x80093201L)
//
// MessageId: CRYPT_E_ASN1_NOEOD
//
// MessageText:
//
// ASN1 end of data expected
//
#define
CRYPT_E_ASN1_NOEOD
_HRESULT_TYPEDEF_(0x80093202L)
//
// MessageId: CERTSRV_E_BAD_REQUESTSUBJECT
//
// MessageText:
//
// The request subject name is invalid or too long.
//
#define
CERTSRV_E_BAD_REQUESTSUBJECT
_HRESULT_TYPEDEF_(0x80094001L)
//
// MessageId: CERTSRV_E_NO_REQUEST
//
// MessageText:
//
// The request does not exist.
//
#define
CERTSRV_E_NO_REQUEST
_HRESULT_TYPEDEF_(0x80094002L)
//
// MessageId: CERTSRV_E_BAD_REQUESTSTATUS
//
// MessageText:
//
// The request's current status does not allow this operation.
//
#define
CERTSRV_E_BAD_REQUESTSTATUS
_HRESULT_TYPEDEF_(0x80094003L)
//
// MessageId: CERTSRV_E_PROPERTY_EMPTY
//
// MessageText:
//
// The requested property value is empty.
//
#define
CERTSRV_E_PROPERTY_EMPTY
_HRESULT_TYPEDEF_(0x80094004L)
//
// MessageId: CERTSRV_E_INVALID_CA_CERTIFICATE
//
// MessageText:
//
// The certification authority's certificate contains invalid data.
//
#define CERTSRV_E_INVALID_CA_CERTIFICATE _HRESULT_TYPEDEF_(0x80094005L)
//
// MessageId: CERTSRV_E_SERVER_SUSPENDED
//
// MessageText:
//
// Certificate service has been suspended for a database restore
operation.
//
#define
CERTSRV_E_SERVER_SUSPENDED
_HRESULT_TYPEDEF_(0x80094006L)
//
// MessageId: CERTSRV_E_ENCODING_LENGTH
//
// MessageText:
//
// The certificate contains an encoded length that is potentially
incompatible with older enrollment software.
//
#define
CERTSRV_E_ENCODING_LENGTH
_HRESULT_TYPEDEF_(0x80094007L)
//
// MessageId: CERTSRV_E_ROLECONFLICT
//
// MessageText:
//
//
The operation is denied. The user has multiple roles assigned and the
certification authority is configured to enforce role separation.
//
#define
CERTSRV_E_ROLECONFLICT
_HRESULT_TYPEDEF_(0x80094008L)
//
// MessageId: CERTSRV_E_RESTRICTEDOFFICER
//
// MessageText:
//
//
The operation is denied. It can only be performed by a certificate
manager that is allowed to manage certificates for the current
requester.
//
#define
CERTSRV_E_RESTRICTEDOFFICER
_HRESULT_TYPEDEF_(0x80094009L)
//
// MessageId: CERTSRV_E_KEY_ARCHIVAL_NOT_CONFIGURED
//
// MessageText:
//
// Cannot archive private key. The certification authority is not
configured for key archival.
//
#define CERTSRV_E_KEY_ARCHIVAL_NOT_CONFIGURED
_HRESULT_TYPEDEF_(0x8009400AL)
//
// MessageId: CERTSRV_E_NO_VALID_KRA
//
// MessageText:
//
// Cannot archive private key. The certification authority could not
verify one or more key recovery certificates.
//
#define
CERTSRV_E_NO_VALID_KRA
_HRESULT_TYPEDEF_(0x8009400BL)
//
// MessageId: CERTSRV_E_BAD_REQUEST_KEY_ARCHIVAL
//
// MessageText:
//
//
The request is incorrectly formatted. The encrypted private key must be
in an unauthenticated attribute in an outermost signature.
//
#define CERTSRV_E_BAD_REQUEST_KEY_ARCHIVAL
_HRESULT_TYPEDEF_(0x8009400CL)
//
// MessageId: CERTSRV_E_NO_CAADMIN_DEFINED
//
// MessageText:
//
// At least one security principal must have the permission to manage
this CA.
//
#define
CERTSRV_E_NO_CAADMIN_DEFINED
_HRESULT_TYPEDEF_(0x8009400DL)
//
// MessageId: CERTSRV_E_BAD_RENEWAL_CERT_ATTRIBUTE
//
// MessageText:
//
// The request contains an invalid renewal certificate attribute.
//
#define CERTSRV_E_BAD_RENEWAL_CERT_ATTRIBUTE
_HRESULT_TYPEDEF_(0x8009400EL)
//
// MessageId: CERTSRV_E_NO_DB_SESSIONS
//
// MessageText:
//
//
An attempt was made to open a Certification Authority database session,
but there are already too many active sessions. The server may need to
be configured to allow additional sessions.
//
#define
CERTSRV_E_NO_DB_SESSIONS
_HRESULT_TYPEDEF_(0x8009400FL)
//
// MessageId: CERTSRV_E_ALIGNMENT_FAULT
//
// MessageText:
//
// A memory reference caused a data alignment fault.
//
#define
CERTSRV_E_ALIGNMENT_FAULT
_HRESULT_TYPEDEF_(0x80094010L)
//
// MessageId: CERTSRV_E_ENROLL_DENIED
//
// MessageText:
//
// The permissions on this certification authority do not allow the
current user to enroll for certificates.
//
#define
CERTSRV_E_ENROLL_DENIED
_HRESULT_TYPEDEF_(0x80094011L)
//
// MessageId: CERTSRV_E_TEMPLATE_DENIED
//
// MessageText:
//
// The permissions on the certificate template do not allow the current
user to enroll for this type of certificate.
//
#define
CERTSRV_E_TEMPLATE_DENIED
_HRESULT_TYPEDEF_(0x80094012L)
//
// MessageId: CERTSRV_E_DOWNLEVEL_DC_SSL_OR_UPGRADE
//
// MessageText:
//
//
The contacted domain controller cannot support signed LDAP traffic.
Update the domain controller or configure Certificate Services to use
SSL for Active Directory access.
//
#define CERTSRV_E_DOWNLEVEL_DC_SSL_OR_UPGRADE
_HRESULT_TYPEDEF_(0x80094013L)
//
// MessageId: CERTSRV_E_ADMIN_DENIED_REQUEST
//
// MessageText:
//
// The request was denied by a certificate manager or CA administrator.
//
#define CERTSRV_E_ADMIN_DENIED_REQUEST
_HRESULT_TYPEDEF_(0x80094014L)
//
// MessageId: CERTSRV_E_NO_POLICY_SERVER
//
// MessageText:
//
// An enrollment policy server cannot be located.
//
#define
CERTSRV_E_NO_POLICY_SERVER
_HRESULT_TYPEDEF_(0x80094015L)
//
// MessageId: CERTSRV_E_UNSUPPORTED_CERT_TYPE
//
// MessageText:
//
// The requested certificate template is not supported by this CA.
//
#define CERTSRV_E_UNSUPPORTED_CERT_TYPE
_HRESULT_TYPEDEF_(0x80094800L)
//
// MessageId: CERTSRV_E_NO_CERT_TYPE
//
// MessageText:
//
// The request contains no certificate template information.
//
#define
CERTSRV_E_NO_CERT_TYPE
_HRESULT_TYPEDEF_(0x80094801L)
//
// MessageId: CERTSRV_E_TEMPLATE_CONFLICT
//
// MessageText:
//
// The request contains conflicting template information.
//
#define
CERTSRV_E_TEMPLATE_CONFLICT
_HRESULT_TYPEDEF_(0x80094802L)
//
// MessageId: CERTSRV_E_SUBJECT_ALT_NAME_REQUIRED
//
// MessageText:
//
// The request is missing a required Subject Alternate name extension.
//
#define CERTSRV_E_SUBJECT_ALT_NAME_REQUIRED
_HRESULT_TYPEDEF_(0x80094803L)
//
// MessageId: CERTSRV_E_ARCHIVED_KEY_REQUIRED
//
// MessageText:
//
// The request is missing a required private key for archival by the
server.
//
#define CERTSRV_E_ARCHIVED_KEY_REQUIRED
_HRESULT_TYPEDEF_(0x80094804L)
//
// MessageId: CERTSRV_E_SMIME_REQUIRED
//
// MessageText:
//
// The request is missing a required SMIME capabilities extension.
//
#define
CERTSRV_E_SMIME_REQUIRED
_HRESULT_TYPEDEF_(0x80094805L)
//
// MessageId: CERTSRV_E_BAD_RENEWAL_SUBJECT
//
// MessageText:
//
//
The request was made on behalf of a subject other than the caller. The
certificate template must be configured to require at least one
signature to authorize the request.
//
#define CERTSRV_E_BAD_RENEWAL_SUBJECT
_HRESULT_TYPEDEF_(0x80094806L)
//
// MessageId: CERTSRV_E_BAD_TEMPLATE_VERSION
//
// MessageText:
//
// The request template version is newer than the supported template
version.
//
#define CERTSRV_E_BAD_TEMPLATE_VERSION
_HRESULT_TYPEDEF_(0x80094807L)
//
// MessageId: CERTSRV_E_TEMPLATE_POLICY_REQUIRED
//
// MessageText:
//
// The template is missing a required signature policy attribute.
//
#define CERTSRV_E_TEMPLATE_POLICY_REQUIRED
_HRESULT_TYPEDEF_(0x80094808L)
//
// MessageId: CERTSRV_E_SIGNATURE_POLICY_REQUIRED
//
// MessageText:
//
// The request is missing required signature policy information.
//
#define CERTSRV_E_SIGNATURE_POLICY_REQUIRED
_HRESULT_TYPEDEF_(0x80094809L)
//
// MessageId: CERTSRV_E_SIGNATURE_COUNT
//
// MessageText:
//
// The request is missing one or more required signatures.
//
#define
CERTSRV_E_SIGNATURE_COUNT
_HRESULT_TYPEDEF_(0x8009480AL)
//
// MessageId: CERTSRV_E_SIGNATURE_REJECTED
//
// MessageText:
//
//
One or more signatures did not include the required application or
issuance policies. The request is missing one or more required valid
signatures.
//
#define
CERTSRV_E_SIGNATURE_REJECTED
_HRESULT_TYPEDEF_(0x8009480BL)
//
// MessageId: CERTSRV_E_ISSUANCE_POLICY_REQUIRED
//
// MessageText:
//
// The request is missing one or more required signature issuance
policies.
//
#define CERTSRV_E_ISSUANCE_POLICY_REQUIRED
_HRESULT_TYPEDEF_(0x8009480CL)
//
// MessageId: CERTSRV_E_SUBJECT_UPN_REQUIRED
//
// MessageText:
//
// The UPN is unavailable and cannot be added to the Subject Alternate
name.
//
#define CERTSRV_E_SUBJECT_UPN_REQUIRED
_HRESULT_TYPEDEF_(0x8009480DL)
//
// MessageId: CERTSRV_E_SUBJECT_DIRECTORY_GUID_REQUIRED
//
// MessageText:
//
// The Active Directory GUID is unavailable and cannot be added to the
Subject Alternate name.
//
#define CERTSRV_E_SUBJECT_DIRECTORY_GUID_REQUIRED
_HRESULT_TYPEDEF_(0x8009480EL)
//
// MessageId: CERTSRV_E_SUBJECT_DNS_REQUIRED
//
// MessageText:
//
// The DNS name is unavailable and cannot be added to the Subject
Alternate name.
//
#define CERTSRV_E_SUBJECT_DNS_REQUIRED
_HRESULT_TYPEDEF_(0x8009480FL)
//
// MessageId: CERTSRV_E_ARCHIVED_KEY_UNEXPECTED
//
// MessageText:
//
//
The request includes a private key for archival by the server, but key
archival is not enabled for the specified certificate template.
//
#define CERTSRV_E_ARCHIVED_KEY_UNEXPECTED _HRESULT_TYPEDEF_(0x80094810L)
//
// MessageId: CERTSRV_E_KEY_LENGTH
//
// MessageText:
//
// The public key does not meet the minimum size required by the
specified certificate template.
//
#define
CERTSRV_E_KEY_LENGTH
_HRESULT_TYPEDEF_(0x80094811L)
//
// MessageId: CERTSRV_E_SUBJECT_EMAIL_REQUIRED
//
// MessageText:
//
// The EMail name is unavailable and cannot be added to the Subject or
Subject Alternate name.
//
#define CERTSRV_E_SUBJECT_EMAIL_REQUIRED _HRESULT_TYPEDEF_(0x80094812L)
//
// MessageId: CERTSRV_E_UNKNOWN_CERT_TYPE
//
// MessageText:
//
// One or more certificate templates to be enabled on this
certification authority could not be found.
//
#define
CERTSRV_E_UNKNOWN_CERT_TYPE
_HRESULT_TYPEDEF_(0x80094813L)
//
// MessageId: CERTSRV_E_CERT_TYPE_OVERLAP
//
// MessageText:
//
//
The certificate template renewal period is longer than the certificate
validity period. The template should be reconfigured or the CA
certificate renewed.
//
#define
CERTSRV_E_CERT_TYPE_OVERLAP
_HRESULT_TYPEDEF_(0x80094814L)
//
// MessageId: CERTSRV_E_TOO_MANY_SIGNATURES
//
// MessageText:
//
// The certificate template requires too many RA signatures. Only one
RA signature is allowed.
//
#define CERTSRV_E_TOO_MANY_SIGNATURES
_HRESULT_TYPEDEF_(0x80094815L)
//
// The range 0x5000-0x51ff is reserved for XENROLL errors.
//
//
// MessageId: XENROLL_E_KEY_NOT_EXPORTABLE
//
// MessageText:
//
// The key is not exportable.
//
#define
XENROLL_E_KEY_NOT_EXPORTABLE
_HRESULT_TYPEDEF_(0x80095000L)
//
// MessageId: XENROLL_E_CANNOT_ADD_ROOT_CERT
//
// MessageText:
//
// You cannot add the root CA certificate into your local store.
//
#define XENROLL_E_CANNOT_ADD_ROOT_CERT
_HRESULT_TYPEDEF_(0x80095001L)
//
// MessageId: XENROLL_E_RESPONSE_KA_HASH_NOT_FOUND
//
// MessageText:
//
// The key archival hash attribute was not found in the response.
//
#define XENROLL_E_RESPONSE_KA_HASH_NOT_FOUND
_HRESULT_TYPEDEF_(0x80095002L)
//
// MessageId: XENROLL_E_RESPONSE_UNEXPECTED_KA_HASH
//
// MessageText:
//
// An unexpected key archival hash attribute was found in the response.
//
#define XENROLL_E_RESPONSE_UNEXPECTED_KA_HASH
_HRESULT_TYPEDEF_(0x80095003L)
//
// MessageId: XENROLL_E_RESPONSE_KA_HASH_MISMATCH
//
// MessageText:
//
// There is a key archival hash mismatch between the request and the
response.
//
#define XENROLL_E_RESPONSE_KA_HASH_MISMATCH
_HRESULT_TYPEDEF_(0x80095004L)
//
// MessageId: XENROLL_E_KEYSPEC_SMIME_MISMATCH
//
// MessageText:
//
// Signing certificate cannot include SMIME extension.
//
#define XENROLL_E_KEYSPEC_SMIME_MISMATCH _HRESULT_TYPEDEF_(0x80095005L)
//
// MessageId: TRUST_E_SYSTEM_ERROR
//
// MessageText:
//
// A system-level error occurred while verifying trust.
//
#define
TRUST_E_SYSTEM_ERROR
_HRESULT_TYPEDEF_(0x80096001L)
//
// MessageId: TRUST_E_NO_SIGNER_CERT
//
// MessageText:
//
// The certificate for the signer of the message is invalid or not
found.
//
#define
TRUST_E_NO_SIGNER_CERT
_HRESULT_TYPEDEF_(0x80096002L)
//
// MessageId: TRUST_E_COUNTER_SIGNER
//
// MessageText:
//
// One of the counter signatures was invalid.
//
#define
TRUST_E_COUNTER_SIGNER
_HRESULT_TYPEDEF_(0x80096003L)
//
// MessageId: TRUST_E_CERT_SIGNATURE
//
// MessageText:
//
// The signature of the certificate cannot be verified.
//
#define
TRUST_E_CERT_SIGNATURE
_HRESULT_TYPEDEF_(0x80096004L)
//
// MessageId: TRUST_E_TIME_STAMP
//
// MessageText:
//
// The timestamp signature and/or certificate could not be verified or
is malformed.
//
#define
TRUST_E_TIME_STAMP
_HRESULT_TYPEDEF_(0x80096005L)
//
// MessageId: TRUST_E_BAD_DIGEST
//
// MessageText:
//
// The digital signature of the object did not verify.
//
#define
TRUST_E_BAD_DIGEST
_HRESULT_TYPEDEF_(0x80096010L)
//
// MessageId: TRUST_E_BASIC_CONSTRAINTS
//
// MessageText:
//
// A certificate's basic constraint extension has not been observed.
//
#define
TRUST_E_BASIC_CONSTRAINTS
_HRESULT_TYPEDEF_(0x80096019L)
//
// MessageId: TRUST_E_FINANCIAL_CRITERIA
//
// MessageText:
//
// The certificate does not meet or contain the Authenticode(tm)
financial extensions.
//
#define
TRUST_E_FINANCIAL_CRITERIA
_HRESULT_TYPEDEF_(0x8009601EL)
//
// Error codes for mssipotf.dll
// Most of the error codes can only occur when an error occurs
// during font file signing
//
//
//
// MessageId: MSSIPOTF_E_OUTOFMEMRANGE
//
// MessageText:
//
// Tried to reference a part of the file outside the proper range.
//
#define
MSSIPOTF_E_OUTOFMEMRANGE
_HRESULT_TYPEDEF_(0x80097001L)
//
// MessageId: MSSIPOTF_E_CANTGETOBJECT
//
// MessageText:
//
// Could not retrieve an object from the file.
//
#define
MSSIPOTF_E_CANTGETOBJECT
_HRESULT_TYPEDEF_(0x80097002L)
//
// MessageId: MSSIPOTF_E_NOHEADTABLE
//
// MessageText:
//
// Could not find the head table in the file.
//
#define
MSSIPOTF_E_NOHEADTABLE
_HRESULT_TYPEDEF_(0x80097003L)
//
// MessageId: MSSIPOTF_E_BAD_MAGICNUMBER
//
// MessageText:
//
// The magic number in the head table is incorrect.
//
#define
MSSIPOTF_E_BAD_MAGICNUMBER
_HRESULT_TYPEDEF_(0x80097004L)
//
// MessageId: MSSIPOTF_E_BAD_OFFSET_TABLE
//
// MessageText:
//
// The offset table has incorrect values.
//
#define
MSSIPOTF_E_BAD_OFFSET_TABLE
_HRESULT_TYPEDEF_(0x80097005L)
//
// MessageId: MSSIPOTF_E_TABLE_TAGORDER
//
// MessageText:
//
// Duplicate table tags or tags out of alphabetical order.
//
#define
MSSIPOTF_E_TABLE_TAGORDER
_HRESULT_TYPEDEF_(0x80097006L)
//
// MessageId: MSSIPOTF_E_TABLE_LONGWORD
//
// MessageText:
//
// A table does not start on a long word boundary.
//
#define
MSSIPOTF_E_TABLE_LONGWORD
_HRESULT_TYPEDEF_(0x80097007L)
//
// MessageId: MSSIPOTF_E_BAD_FIRST_TABLE_PLACEMENT
//
// MessageText:
//
// First table does not appear after header information.
//
#define MSSIPOTF_E_BAD_FIRST_TABLE_PLACEMENT
_HRESULT_TYPEDEF_(0x80097008L)
//
// MessageId: MSSIPOTF_E_TABLES_OVERLAP
//
// MessageText:
//
// Two or more tables overlap.
//
#define
MSSIPOTF_E_TABLES_OVERLAP
_HRESULT_TYPEDEF_(0x80097009L)
//
// MessageId: MSSIPOTF_E_TABLE_PADBYTES
//
// MessageText:
//
// Too many pad bytes between tables or pad bytes are not 0.
//
#define
MSSIPOTF_E_TABLE_PADBYTES
_HRESULT_TYPEDEF_(0x8009700AL)
//
// MessageId: MSSIPOTF_E_FILETOOSMALL
//
// MessageText:
//
// File is too small to contain the last table.
//
#define
MSSIPOTF_E_FILETOOSMALL
_HRESULT_TYPEDEF_(0x8009700BL)
//
// MessageId: MSSIPOTF_E_TABLE_CHECKSUM
//
// MessageText:
//
// A table checksum is incorrect.
//
#define
MSSIPOTF_E_TABLE_CHECKSUM
_HRESULT_TYPEDEF_(0x8009700CL)
//
// MessageId: MSSIPOTF_E_FILE_CHECKSUM
//
// MessageText:
//
// The file checksum is incorrect.
//
#define
MSSIPOTF_E_FILE_CHECKSUM
_HRESULT_TYPEDEF_(0x8009700DL)
//
// MessageId: MSSIPOTF_E_FAILED_POLICY
//
// MessageText:
//
// The signature does not have the correct attributes for the policy.
//
#define
MSSIPOTF_E_FAILED_POLICY
_HRESULT_TYPEDEF_(0x80097010L)
//
// MessageId: MSSIPOTF_E_FAILED_HINTS_CHECK
//
// MessageText:
//
// The file did not pass the hints check.
//
#define MSSIPOTF_E_FAILED_HINTS_CHECK
_HRESULT_TYPEDEF_(0x80097011L)
//
// MessageId: MSSIPOTF_E_NOT_OPENTYPE
//
// MessageText:
//
// The file is not an OpenType file.
//
#define
MSSIPOTF_E_NOT_OPENTYPE
_HRESULT_TYPEDEF_(0x80097012L)
//
// MessageId: MSSIPOTF_E_FILE
//
// MessageText:
//
// Failed on a file operation (open, map, read, write).
//
#define
MSSIPOTF_E_FILE
_HRESULT_TYPEDEF_(0x80097013L)
//
// MessageId: MSSIPOTF_E_CRYPT
//
// MessageText:
//
// A call to a CryptoAPI function failed.
//
#define
MSSIPOTF_E_CRYPT
_HRESULT_TYPEDEF_(0x80097014L)
//
// MessageId: MSSIPOTF_E_BADVERSION
//
// MessageText:
//
// There is a bad version number in the file.
//
#define
MSSIPOTF_E_BADVERSION
_HRESULT_TYPEDEF_(0x80097015L)
//
// MessageId: MSSIPOTF_E_DSIG_STRUCTURE
//
// MessageText:
//
// The structure of the DSIG table is incorrect.
//
#define
MSSIPOTF_E_DSIG_STRUCTURE
_HRESULT_TYPEDEF_(0x80097016L)
//
// MessageId: MSSIPOTF_E_PCONST_CHECK
//
// MessageText:
//
// A check failed in a partially constant table.
//
#define
MSSIPOTF_E_PCONST_CHECK
_HRESULT_TYPEDEF_(0x80097017L)
//
// MessageId: MSSIPOTF_E_STRUCTURE
//
// MessageText:
//
// Some kind of structural error.
//
#define
MSSIPOTF_E_STRUCTURE
_HRESULT_TYPEDEF_(0x80097018L)
//
// MessageId: ERROR_CRED_REQUIRES_CONFIRMATION
//
// MessageText:
//
// The requested credential requires confirmation.
//
#define ERROR_CRED_REQUIRES_CONFIRMATION _HRESULT_TYPEDEF_(0x80097019L)
#define NTE_OP_OK 0
//
// Note that additional FACILITY_SSPI errors are in issperr.h
//
// ******************
// FACILITY_CERT
// ******************
//
// MessageId: TRUST_E_PROVIDER_UNKNOWN
//
// MessageText:
//
// Unknown trust provider.
//
#define
TRUST_E_PROVIDER_UNKNOWN
_HRESULT_TYPEDEF_(0x800B0001L)
//
// MessageId: TRUST_E_ACTION_UNKNOWN
//
// MessageText:
//
// The trust verification action specified is not supported by the
specified trust provider.
//
#define
TRUST_E_ACTION_UNKNOWN
_HRESULT_TYPEDEF_(0x800B0002L)
//
// MessageId: TRUST_E_SUBJECT_FORM_UNKNOWN
//
// MessageText:
//
// The form specified for the subject is not one supported or known by
the specified trust provider.
//
#define
TRUST_E_SUBJECT_FORM_UNKNOWN
_HRESULT_TYPEDEF_(0x800B0003L)
//
// MessageId: TRUST_E_SUBJECT_NOT_TRUSTED
//
// MessageText:
//
// The subject is not trusted for the specified action.
//
#define
TRUST_E_SUBJECT_NOT_TRUSTED
_HRESULT_TYPEDEF_(0x800B0004L)
//
// MessageId: DIGSIG_E_ENCODE
//
// MessageText:
//
// Error due to problem in ASN.1 encoding process.
//
#define
DIGSIG_E_ENCODE
_HRESULT_TYPEDEF_(0x800B0005L)
//
// MessageId: DIGSIG_E_DECODE
//
// MessageText:
//
// Error due to problem in ASN.1 decoding process.
//
#define
DIGSIG_E_DECODE
_HRESULT_TYPEDEF_(0x800B0006L)
//
// MessageId: DIGSIG_E_EXTENSIBILITY
//
// MessageText:
//
// Reading / writing Extensions where Attributes are appropriate, and
visa versa.
//
#define
DIGSIG_E_EXTENSIBILITY
_HRESULT_TYPEDEF_(0x800B0007L)
//
// MessageId: DIGSIG_E_CRYPTO
//
// MessageText:
//
// Unspecified cryptographic failure.
//
#define
DIGSIG_E_CRYPTO
_HRESULT_TYPEDEF_(0x800B0008L)
//
// MessageId: PERSIST_E_SIZEDEFINITE
//
// MessageText:
//
// The size of the data could not be determined.
//
#define
PERSIST_E_SIZEDEFINITE
_HRESULT_TYPEDEF_(0x800B0009L)
//
// MessageId: PERSIST_E_SIZEINDEFINITE
//
// MessageText:
//
// The size of the indefinite-sized data could not be determined.
//
#define
PERSIST_E_SIZEINDEFINITE
_HRESULT_TYPEDEF_(0x800B000AL)
//
// MessageId: PERSIST_E_NOTSELFSIZING
//
// MessageText:
//
// This object does not read and write self-sizing data.
//
#define
PERSIST_E_NOTSELFSIZING
_HRESULT_TYPEDEF_(0x800B000BL)
//
// MessageId: TRUST_E_NOSIGNATURE
//
// MessageText:
//
// No signature was present in the subject.
//
#define
TRUST_E_NOSIGNATURE
_HRESULT_TYPEDEF_(0x800B0100L)
//
// MessageId: CERT_E_EXPIRED
//
// MessageText:
//
//
A required certificate is not within its validity period when verifying
against the current system clock or the timestamp in the signed file.
//
#define
CERT_E_EXPIRED
_HRESULT_TYPEDEF_(0x800B0101L)
//
// MessageId: CERT_E_VALIDITYPERIODNESTING
//
// MessageText:
//
// The validity periods of the certification chain do not nest
correctly.
//
#define
CERT_E_VALIDITYPERIODNESTING
_HRESULT_TYPEDEF_(0x800B0102L)
//
// MessageId: CERT_E_ROLE
//
// MessageText:
//
// A certificate that can only be used as an end-entity is being used
as a CA or visa versa.
//
#define
CERT_E_ROLE
_HRESULT_TYPEDEF_(0x800B0103L)
//
// MessageId: CERT_E_PATHLENCONST
//
// MessageText:
//
// A path length constraint in the certification chain has been
violated.
//
#define
CERT_E_PATHLENCONST
_HRESULT_TYPEDEF_(0x800B0104L)
//
// MessageId: CERT_E_CRITICAL
//
// MessageText:
//
// A certificate contains an unknown extension that is marked
'critical'.
//
#define
CERT_E_CRITICAL
_HRESULT_TYPEDEF_(0x800B0105L)
//
// MessageId: CERT_E_PURPOSE
//
// MessageText:
//
// A certificate being used for a purpose other than the ones specified
by its CA.
//
#define
CERT_E_PURPOSE
_HRESULT_TYPEDEF_(0x800B0106L)
//
// MessageId: CERT_E_ISSUERCHAINING
//
// MessageText:
//
// A parent of a given certificate in fact did not issue that child
certificate.
//
#define
CERT_E_ISSUERCHAINING
_HRESULT_TYPEDEF_(0x800B0107L)
//
// MessageId: CERT_E_MALFORMED
//
// MessageText:
//
// A certificate is missing or has an empty value for an important
field, such as a subject or issuer name.
//
#define
CERT_E_MALFORMED
_HRESULT_TYPEDEF_(0x800B0108L)
//
// MessageId: CERT_E_UNTRUSTEDROOT
//
// MessageText:
//
// A certificate chain processed, but terminated in a root certificate
which is not trusted by the trust provider.
//
#define
CERT_E_UNTRUSTEDROOT
_HRESULT_TYPEDEF_(0x800B0109L)
//
// MessageId: CERT_E_CHAINING
//
// MessageText:
//
// A certificate chain could not be built to a trusted root authority.
//
#define
CERT_E_CHAINING
_HRESULT_TYPEDEF_(0x800B010AL)
//
// MessageId: TRUST_E_FAIL
//
// MessageText:
//
// Generic trust failure.
//
#define
TRUST_E_FAIL
_HRESULT_TYPEDEF_(0x800B010BL)
//
// MessageId: CERT_E_REVOKED
//
// MessageText:
//
// A certificate was explicitly revoked by its issuer.
//
#define
CERT_E_REVOKED
_HRESULT_TYPEDEF_(0x800B010CL)
//
// MessageId: CERT_E_UNTRUSTEDTESTROOT
//
// MessageText:
//
// The certification path terminates with the test root which is not
trusted with the current policy settings.
//
#define
CERT_E_UNTRUSTEDTESTROOT
_HRESULT_TYPEDEF_(0x800B010DL)
//
// MessageId: CERT_E_REVOCATION_FAILURE
//
// MessageText:
//
// The revocation process could not continue - the certificate(s) could
not be checked.
//
#define
CERT_E_REVOCATION_FAILURE
_HRESULT_TYPEDEF_(0x800B010EL)
//
// MessageId: CERT_E_CN_NO_MATCH
//
// MessageText:
//
// The certificate's CN name does not match the passed value.
//
#define
CERT_E_CN_NO_MATCH
_HRESULT_TYPEDEF_(0x800B010FL)
//
// MessageId: CERT_E_WRONG_USAGE
//
// MessageText:
//
// The certificate is not valid for the requested usage.
//
#define
CERT_E_WRONG_USAGE
_HRESULT_TYPEDEF_(0x800B0110L)
//
// MessageId: TRUST_E_EXPLICIT_DISTRUST
//
// MessageText:
//
// The certificate was explicitly marked as untrusted by the user.
//
#define
TRUST_E_EXPLICIT_DISTRUST
_HRESULT_TYPEDEF_(0x800B0111L)
//
// MessageId: CERT_E_UNTRUSTEDCA
//
// MessageText:
//
// A certification chain processed correctly, but one of the CA
certificates is not trusted by the policy provider.
//
#define
CERT_E_UNTRUSTEDCA
_HRESULT_TYPEDEF_(0x800B0112L)
//
// MessageId: CERT_E_INVALID_POLICY
//
// MessageText:
//
// The certificate has invalid policy.
//
#define
CERT_E_INVALID_POLICY
_HRESULT_TYPEDEF_(0x800B0113L)
//
// MessageId: CERT_E_INVALID_NAME
//
// MessageText:
//
// The certificate has an invalid name. The name is not included in the
permitted list or is explicitly excluded.
//
#define
CERT_E_INVALID_NAME
_HRESULT_TYPEDEF_(0x800B0114L)
//
*****************
// FACILITY_SETUPAPI
// *****************
//
// Since these error codes aren't in the standard Win32 range (i.e.,
0-64K), define a
// macro to map either Win32 or SetupAPI error codes into an HRESULT.
//
#define
HRESULT_FROM_SETUPAPI(x) ((((x) &
(APPLICATION_ERROR_MASK|ERROR_SEVERITY_ERROR)) ==
(APPLICATION_ERROR_MASK|ERROR_SEVERITY_ERROR)) \
? ((HRESULT) (((x) & 0x0000FFFF) | (FACILITY_SETUPAPI
<< 16)
|
0x80000000))
\
: HRESULT_FROM_WIN32(x))
//
// MessageId: SPAPI_E_EXPECTED_SECTION_NAME
//
// MessageText:
//
// A non-empty line was encountered in the INF before the start of a
section.
//
#define SPAPI_E_EXPECTED_SECTION_NAME
_HRESULT_TYPEDEF_(0x800F0000L)
//
// MessageId: SPAPI_E_BAD_SECTION_NAME_LINE
//
// MessageText:
//
// A section name marker in the INF is not complete, or does not exist
on a line by itself.
//
#define SPAPI_E_BAD_SECTION_NAME_LINE
_HRESULT_TYPEDEF_(0x800F0001L)
//
// MessageId: SPAPI_E_SECTION_NAME_TOO_LONG
//
// MessageText:
//
// An INF section was encountered whose name exceeds the maximum
section name length.
//
#define SPAPI_E_SECTION_NAME_TOO_LONG
_HRESULT_TYPEDEF_(0x800F0002L)
//
// MessageId: SPAPI_E_GENERAL_SYNTAX
//
// MessageText:
//
// The syntax of the INF is invalid.
//
#define
SPAPI_E_GENERAL_SYNTAX
_HRESULT_TYPEDEF_(0x800F0003L)
//
// MessageId: SPAPI_E_WRONG_INF_STYLE
//
// MessageText:
//
// The style of the INF is different than what was requested.
//
#define
SPAPI_E_WRONG_INF_STYLE
_HRESULT_TYPEDEF_(0x800F0100L)
//
// MessageId: SPAPI_E_SECTION_NOT_FOUND
//
// MessageText:
//
// The required section was not found in the INF.
//
#define
SPAPI_E_SECTION_NOT_FOUND
_HRESULT_TYPEDEF_(0x800F0101L)
//
// MessageId: SPAPI_E_LINE_NOT_FOUND
//
// MessageText:
//
// The required line was not found in the INF.
//
#define
SPAPI_E_LINE_NOT_FOUND
_HRESULT_TYPEDEF_(0x800F0102L)
//
// MessageId: SPAPI_E_NO_BACKUP
//
// MessageText:
//
// The files affected by the installation of this file queue have not
been backed up for uninstall.
//
#define
SPAPI_E_NO_BACKUP
_HRESULT_TYPEDEF_(0x800F0103L)
//
// MessageId: SPAPI_E_NO_ASSOCIATED_CLASS
//
// MessageText:
//
// The INF or the device information set or element does not have an
associated install class.
//
#define
SPAPI_E_NO_ASSOCIATED_CLASS
_HRESULT_TYPEDEF_(0x800F0200L)
//
// MessageId: SPAPI_E_CLASS_MISMATCH
//
// MessageText:
//
// The INF or the device information set or element does not match the
specified install class.
//
#define
SPAPI_E_CLASS_MISMATCH
_HRESULT_TYPEDEF_(0x800F0201L)
//
// MessageId: SPAPI_E_DUPLICATE_FOUND
//
// MessageText:
//
// An existing device was found that is a duplicate of the device being
manually installed.
//
#define
SPAPI_E_DUPLICATE_FOUND
_HRESULT_TYPEDEF_(0x800F0202L)
//
// MessageId: SPAPI_E_NO_DRIVER_SELECTED
//
// MessageText:
//
// There is no driver selected for the device information set or
element.
//
#define
SPAPI_E_NO_DRIVER_SELECTED
_HRESULT_TYPEDEF_(0x800F0203L)
//
// MessageId: SPAPI_E_KEY_DOES_NOT_EXIST
//
// MessageText:
//
// The requested device registry key does not exist.
//
#define
SPAPI_E_KEY_DOES_NOT_EXIST
_HRESULT_TYPEDEF_(0x800F0204L)
//
// MessageId: SPAPI_E_INVALID_DEVINST_NAME
//
// MessageText:
//
// The device instance name is invalid.
//
#define
SPAPI_E_INVALID_DEVINST_NAME
_HRESULT_TYPEDEF_(0x800F0205L)
//
// MessageId: SPAPI_E_INVALID_CLASS
//
// MessageText:
//
// The install class is not present or is invalid.
//
#define
SPAPI_E_INVALID_CLASS
_HRESULT_TYPEDEF_(0x800F0206L)
//
// MessageId: SPAPI_E_DEVINST_ALREADY_EXISTS
//
// MessageText:
//
// The device instance cannot be created because it already exists.
//
#define SPAPI_E_DEVINST_ALREADY_EXISTS
_HRESULT_TYPEDEF_(0x800F0207L)
//
// MessageId: SPAPI_E_DEVINFO_NOT_REGISTERED
//
// MessageText:
//
// The operation cannot be performed on a device information element
that has not been registered.
//
#define SPAPI_E_DEVINFO_NOT_REGISTERED
_HRESULT_TYPEDEF_(0x800F0208L)
//
// MessageId: SPAPI_E_INVALID_REG_PROPERTY
//
// MessageText:
//
// The device property code is invalid.
//
#define
SPAPI_E_INVALID_REG_PROPERTY
_HRESULT_TYPEDEF_(0x800F0209L)
//
// MessageId: SPAPI_E_NO_INF
//
// MessageText:
//
// The INF from which a driver list is to be built does not exist.
//
#define
SPAPI_E_NO_INF
_HRESULT_TYPEDEF_(0x800F020AL)
//
// MessageId: SPAPI_E_NO_SUCH_DEVINST
//
// MessageText:
//
// The device instance does not exist in the hardware tree.
//
#define
SPAPI_E_NO_SUCH_DEVINST
_HRESULT_TYPEDEF_(0x800F020BL)
//
// MessageId: SPAPI_E_CANT_LOAD_CLASS_ICON
//
// MessageText:
//
// The icon representing this install class cannot be loaded.
//
#define
SPAPI_E_CANT_LOAD_CLASS_ICON
_HRESULT_TYPEDEF_(0x800F020CL)
//
// MessageId: SPAPI_E_INVALID_CLASS_INSTALLER
//
// MessageText:
//
// The class installer registry entry is invalid.
//
#define SPAPI_E_INVALID_CLASS_INSTALLER
_HRESULT_TYPEDEF_(0x800F020DL)
//
// MessageId: SPAPI_E_DI_DO_DEFAULT
//
// MessageText:
//
// The class installer has indicated that the default action should be
performed for this installation request.
//
#define
SPAPI_E_DI_DO_DEFAULT
_HRESULT_TYPEDEF_(0x800F020EL)
//
// MessageId: SPAPI_E_DI_NOFILECOPY
//
// MessageText:
//
// The operation does not require any files to be copied.
//
#define
SPAPI_E_DI_NOFILECOPY
_HRESULT_TYPEDEF_(0x800F020FL)
//
// MessageId: SPAPI_E_INVALID_HWPROFILE
//
// MessageText:
//
// The specified hardware profile does not exist.
//
#define
SPAPI_E_INVALID_HWPROFILE
_HRESULT_TYPEDEF_(0x800F0210L)
//
// MessageId: SPAPI_E_NO_DEVICE_SELECTED
//
// MessageText:
//
// There is no device information element currently selected for this
device information set.
//
#define
SPAPI_E_NO_DEVICE_SELECTED
_HRESULT_TYPEDEF_(0x800F0211L)
//
// MessageId: SPAPI_E_DEVINFO_LIST_LOCKED
//
// MessageText:
//
// The operation cannot be performed because the device information set
is locked.
//
#define
SPAPI_E_DEVINFO_LIST_LOCKED
_HRESULT_TYPEDEF_(0x800F0212L)
//
// MessageId: SPAPI_E_DEVINFO_DATA_LOCKED
//
// MessageText:
//
// The operation cannot be performed because the device information
element is locked.
//
#define
SPAPI_E_DEVINFO_DATA_LOCKED
_HRESULT_TYPEDEF_(0x800F0213L)
//
// MessageId: SPAPI_E_DI_BAD_PATH
//
// MessageText:
//
// The specified path does not contain any applicable device INFs.
//
#define
SPAPI_E_DI_BAD_PATH
_HRESULT_TYPEDEF_(0x800F0214L)
//
// MessageId: SPAPI_E_NO_CLASSINSTALL_PARAMS
//
// MessageText:
//
// No class installer parameters have been set for the device
information set or element.
//
#define SPAPI_E_NO_CLASSINSTALL_PARAMS
_HRESULT_TYPEDEF_(0x800F0215L)
//
// MessageId: SPAPI_E_FILEQUEUE_LOCKED
//
// MessageText:
//
// The operation cannot be performed because the file queue is locked.
//
#define
SPAPI_E_FILEQUEUE_LOCKED
_HRESULT_TYPEDEF_(0x800F0216L)
//
// MessageId: SPAPI_E_BAD_SERVICE_INSTALLSECT
//
// MessageText:
//
// A service installation section in this INF is invalid.
//
#define SPAPI_E_BAD_SERVICE_INSTALLSECT
_HRESULT_TYPEDEF_(0x800F0217L)
//
// MessageId: SPAPI_E_NO_CLASS_DRIVER_LIST
//
// MessageText:
//
// There is no class driver list for the device information element.
//
#define
SPAPI_E_NO_CLASS_DRIVER_LIST
_HRESULT_TYPEDEF_(0x800F0218L)
//
// MessageId: SPAPI_E_NO_ASSOCIATED_SERVICE
//
// MessageText:
//
// The installation failed because a function driver was not specified
for this device instance.
//
#define SPAPI_E_NO_ASSOCIATED_SERVICE
_HRESULT_TYPEDEF_(0x800F0219L)
//
// MessageId: SPAPI_E_NO_DEFAULT_DEVICE_INTERFACE
//
// MessageText:
//
// There is presently no default device interface designated for this
interface class.
//
#define SPAPI_E_NO_DEFAULT_DEVICE_INTERFACE
_HRESULT_TYPEDEF_(0x800F021AL)
//
// MessageId: SPAPI_E_DEVICE_INTERFACE_ACTIVE
//
// MessageText:
//
// The operation cannot be performed because the device interface is
currently active.
//
#define SPAPI_E_DEVICE_INTERFACE_ACTIVE
_HRESULT_TYPEDEF_(0x800F021BL)
//
// MessageId: SPAPI_E_DEVICE_INTERFACE_REMOVED
//
// MessageText:
//
// The operation cannot be performed because the device interface has
been removed from the system.
//
#define SPAPI_E_DEVICE_INTERFACE_REMOVED _HRESULT_TYPEDEF_(0x800F021CL)
//
// MessageId: SPAPI_E_BAD_INTERFACE_INSTALLSECT
//
// MessageText:
//
// An interface installation section in this INF is invalid.
//
#define SPAPI_E_BAD_INTERFACE_INSTALLSECT _HRESULT_TYPEDEF_(0x800F021DL)
//
// MessageId: SPAPI_E_NO_SUCH_INTERFACE_CLASS
//
// MessageText:
//
// This interface class does not exist in the system.
//
#define SPAPI_E_NO_SUCH_INTERFACE_CLASS
_HRESULT_TYPEDEF_(0x800F021EL)
//
// MessageId: SPAPI_E_INVALID_REFERENCE_STRING
//
// MessageText:
//
// The reference string supplied for this interface device is invalid.
//
#define SPAPI_E_INVALID_REFERENCE_STRING _HRESULT_TYPEDEF_(0x800F021FL)
//
// MessageId: SPAPI_E_INVALID_MACHINENAME
//
// MessageText:
//
// The specified machine name does not conform to UNC naming
conventions.
//
#define
SPAPI_E_INVALID_MACHINENAME
_HRESULT_TYPEDEF_(0x800F0220L)
//
// MessageId: SPAPI_E_REMOTE_COMM_FAILURE
//
// MessageText:
//
// A general remote communication error occurred.
//
#define
SPAPI_E_REMOTE_COMM_FAILURE
_HRESULT_TYPEDEF_(0x800F0221L)
//
// MessageId: SPAPI_E_MACHINE_UNAVAILABLE
//
// MessageText:
//
// The machine selected for remote communication is not available at
this time.
//
#define
SPAPI_E_MACHINE_UNAVAILABLE
_HRESULT_TYPEDEF_(0x800F0222L)
//
// MessageId: SPAPI_E_NO_CONFIGMGR_SERVICES
//
// MessageText:
//
// The Plug and Play service is not available on the remote machine.
//
#define SPAPI_E_NO_CONFIGMGR_SERVICES
_HRESULT_TYPEDEF_(0x800F0223L)
//
// MessageId: SPAPI_E_INVALID_PROPPAGE_PROVIDER
//
// MessageText:
//
// The property page provider registry entry is invalid.
//
#define SPAPI_E_INVALID_PROPPAGE_PROVIDER _HRESULT_TYPEDEF_(0x800F0224L)
//
// MessageId: SPAPI_E_NO_SUCH_DEVICE_INTERFACE
//
// MessageText:
//
// The requested device interface is not present in the system.
//
#define SPAPI_E_NO_SUCH_DEVICE_INTERFACE _HRESULT_TYPEDEF_(0x800F0225L)
//
// MessageId: SPAPI_E_DI_POSTPROCESSING_REQUIRED
//
// MessageText:
//
// The device's co-installer has additional work to perform after
installation is complete.
//
#define SPAPI_E_DI_POSTPROCESSING_REQUIRED
_HRESULT_TYPEDEF_(0x800F0226L)
//
// MessageId: SPAPI_E_INVALID_COINSTALLER
//
// MessageText:
//
// The device's co-installer is invalid.
//
#define
SPAPI_E_INVALID_COINSTALLER
_HRESULT_TYPEDEF_(0x800F0227L)
//
// MessageId: SPAPI_E_NO_COMPAT_DRIVERS
//
// MessageText:
//
// There are no compatible drivers for this device.
//
#define
SPAPI_E_NO_COMPAT_DRIVERS
_HRESULT_TYPEDEF_(0x800F0228L)
//
// MessageId: SPAPI_E_NO_DEVICE_ICON
//
// MessageText:
//
// There is no icon that represents this device or device type.
//
#define
SPAPI_E_NO_DEVICE_ICON
_HRESULT_TYPEDEF_(0x800F0229L)
//
// MessageId: SPAPI_E_INVALID_INF_LOGCONFIG
//
// MessageText:
//
// A logical configuration specified in this INF is invalid.
//
#define SPAPI_E_INVALID_INF_LOGCONFIG
_HRESULT_TYPEDEF_(0x800F022AL)
//
// MessageId: SPAPI_E_DI_DONT_INSTALL
//
// MessageText:
//
// The class installer has denied the request to install or upgrade
this device.
//
#define
SPAPI_E_DI_DONT_INSTALL
_HRESULT_TYPEDEF_(0x800F022BL)
//
// MessageId: SPAPI_E_INVALID_FILTER_DRIVER
//
// MessageText:
//
// One of the filter drivers installed for this device is invalid.
//
#define SPAPI_E_INVALID_FILTER_DRIVER
_HRESULT_TYPEDEF_(0x800F022CL)
//
// MessageId: SPAPI_E_NON_WINDOWS_NT_DRIVER
//
// MessageText:
//
// The driver selected for this device does not support this version of
Windows.
//
#define SPAPI_E_NON_WINDOWS_NT_DRIVER
_HRESULT_TYPEDEF_(0x800F022DL)
//
// MessageId: SPAPI_E_NON_WINDOWS_DRIVER
//
// MessageText:
//
// The driver selected for this device does not support Windows.
//
#define
SPAPI_E_NON_WINDOWS_DRIVER
_HRESULT_TYPEDEF_(0x800F022EL)
//
// MessageId: SPAPI_E_NO_CATALOG_FOR_OEM_INF
//
// MessageText:
//
// The third-party INF does not contain digital signature information.
//
#define SPAPI_E_NO_CATALOG_FOR_OEM_INF
_HRESULT_TYPEDEF_(0x800F022FL)
//
// MessageId: SPAPI_E_DEVINSTALL_QUEUE_NONNATIVE
//
// MessageText:
//
//
An invalid attempt was made to use a device installation file queue for
verification of digital signatures relative to other platforms.
//
#define SPAPI_E_DEVINSTALL_QUEUE_NONNATIVE
_HRESULT_TYPEDEF_(0x800F0230L)
//
// MessageId: SPAPI_E_NOT_DISABLEABLE
//
// MessageText:
//
// The device cannot be disabled.
//
#define
SPAPI_E_NOT_DISABLEABLE
_HRESULT_TYPEDEF_(0x800F0231L)
//
// MessageId: SPAPI_E_CANT_REMOVE_DEVINST
//
// MessageText:
//
// The device could not be dynamically removed.
//
#define
SPAPI_E_CANT_REMOVE_DEVINST
_HRESULT_TYPEDEF_(0x800F0232L)
//
// MessageId: SPAPI_E_INVALID_TARGET
//
// MessageText:
//
// Cannot copy to specified target.
//
#define
SPAPI_E_INVALID_TARGET
_HRESULT_TYPEDEF_(0x800F0233L)
//
// MessageId: SPAPI_E_DRIVER_NONNATIVE
//
// MessageText:
//
// Driver is not intended for this platform.
//
#define
SPAPI_E_DRIVER_NONNATIVE
_HRESULT_TYPEDEF_(0x800F0234L)
//
// MessageId: SPAPI_E_IN_WOW64
//
// MessageText:
//
// Operation not allowed in WOW64.
//
#define
SPAPI_E_IN_WOW64
_HRESULT_TYPEDEF_(0x800F0235L)
//
// MessageId: SPAPI_E_SET_SYSTEM_RESTORE_POINT
//
// MessageText:
//
// The operation involving unsigned file copying was rolled back, so
that a system restore point could be set.
//
#define SPAPI_E_SET_SYSTEM_RESTORE_POINT _HRESULT_TYPEDEF_(0x800F0236L)
//
// MessageId: SPAPI_E_INCORRECTLY_COPIED_INF
//
// MessageText:
//
// An INF was copied into the Windows INF directory in an improper
manner.
//
#define SPAPI_E_INCORRECTLY_COPIED_INF
_HRESULT_TYPEDEF_(0x800F0237L)
//
// MessageId: SPAPI_E_SCE_DISABLED
//
// MessageText:
//
// The Security Configuration Editor (SCE) APIs have been disabled on
this Embedded product.
//
#define
SPAPI_E_SCE_DISABLED
_HRESULT_TYPEDEF_(0x800F0238L)
//
// MessageId: SPAPI_E_UNKNOWN_EXCEPTION
//
// MessageText:
//
// An unknown exception was encountered.
//
#define
SPAPI_E_UNKNOWN_EXCEPTION
_HRESULT_TYPEDEF_(0x800F0239L)
//
// MessageId: SPAPI_E_PNP_REGISTRY_ERROR
//
// MessageText:
//
// A problem was encountered when accessing the Plug and Play registry
database.
//
#define
SPAPI_E_PNP_REGISTRY_ERROR
_HRESULT_TYPEDEF_(0x800F023AL)
//
// MessageId: SPAPI_E_REMOTE_REQUEST_UNSUPPORTED
//
// MessageText:
//
// The requested operation is not supported for a remote machine.
//
#define SPAPI_E_REMOTE_REQUEST_UNSUPPORTED
_HRESULT_TYPEDEF_(0x800F023BL)
//
// MessageId: SPAPI_E_NOT_AN_INSTALLED_OEM_INF
//
// MessageText:
//
// The specified file is not an installed OEM INF.
//
#define SPAPI_E_NOT_AN_INSTALLED_OEM_INF _HRESULT_TYPEDEF_(0x800F023CL)
//
// MessageId: SPAPI_E_INF_IN_USE_BY_DEVICES
//
// MessageText:
//
// One or more devices are presently installed using the specified INF.
//
#define SPAPI_E_INF_IN_USE_BY_DEVICES
_HRESULT_TYPEDEF_(0x800F023DL)
//
// MessageId: SPAPI_E_DI_FUNCTION_OBSOLETE
//
// MessageText:
//
// The requested device install operation is obsolete.
//
#define
SPAPI_E_DI_FUNCTION_OBSOLETE
_HRESULT_TYPEDEF_(0x800F023EL)
//
// MessageId: SPAPI_E_NO_AUTHENTICODE_CATALOG
//
// MessageText:
//
// A file could not be verified because it does not have an associated
catalog signed via Authenticode(tm).
//
#define SPAPI_E_NO_AUTHENTICODE_CATALOG
_HRESULT_TYPEDEF_(0x800F023FL)
//
// MessageId: SPAPI_E_AUTHENTICODE_DISALLOWED
//
// MessageText:
//
// Authenticode(tm) signature verification is not supported for the
specified INF.
//
#define SPAPI_E_AUTHENTICODE_DISALLOWED
_HRESULT_TYPEDEF_(0x800F0240L)
//
// MessageId: SPAPI_E_AUTHENTICODE_TRUSTED_PUBLISHER
//
// MessageText:
//
// The INF was signed with an Authenticode(tm) catalog from a trusted
publisher.
//
#define SPAPI_E_AUTHENTICODE_TRUSTED_PUBLISHER
_HRESULT_TYPEDEF_(0x800F0241L)
//
// MessageId: SPAPI_E_AUTHENTICODE_TRUST_NOT_ESTABLISHED
//
// MessageText:
//
// The publisher of an Authenticode(tm) signed catalog has not yet been
established as trusted.
//
#define SPAPI_E_AUTHENTICODE_TRUST_NOT_ESTABLISHED
_HRESULT_TYPEDEF_(0x800F0242L)
//
// MessageId: SPAPI_E_AUTHENTICODE_PUBLISHER_NOT_TRUSTED
//
// MessageText:
//
// The publisher of an Authenticode(tm) signed catalog was not
established as trusted.
//
#define SPAPI_E_AUTHENTICODE_PUBLISHER_NOT_TRUSTED
_HRESULT_TYPEDEF_(0x800F0243L)
//
// MessageId: SPAPI_E_SIGNATURE_OSATTRIBUTE_MISMATCH
//
// MessageText:
//
//
The software was tested for compliance with Windows Logo requirements
on a different version of Windows, and may not be compatible with this
version.
//
#define SPAPI_E_SIGNATURE_OSATTRIBUTE_MISMATCH
_HRESULT_TYPEDEF_(0x800F0244L)
//
// MessageId: SPAPI_E_ONLY_VALIDATE_VIA_AUTHENTICODE
//
// MessageText:
//
// The file may only be validated by a catalog signed via
Authenticode(tm).
//
#define SPAPI_E_ONLY_VALIDATE_VIA_AUTHENTICODE
_HRESULT_TYPEDEF_(0x800F0245L)
//
// MessageId: SPAPI_E_DEVICE_INSTALLER_NOT_READY
//
// MessageText:
//
// One of the installers for this device cannot perform the
installation at this time.
//
#define SPAPI_E_DEVICE_INSTALLER_NOT_READY
_HRESULT_TYPEDEF_(0x800F0246L)
//
// MessageId: SPAPI_E_DRIVER_STORE_ADD_FAILED
//
// MessageText:
//
// A problem was encountered while attempting to add the driver to the
store.
//
#define SPAPI_E_DRIVER_STORE_ADD_FAILED
_HRESULT_TYPEDEF_(0x800F0247L)
//
// MessageId: SPAPI_E_DEVICE_INSTALL_BLOCKED
//
// MessageText:
//
// The installation of this device is forbidden by system policy.
Contact your system administrator.
//
#define SPAPI_E_DEVICE_INSTALL_BLOCKED
_HRESULT_TYPEDEF_(0x800F0248L)
//
// MessageId: SPAPI_E_DRIVER_INSTALL_BLOCKED
//
// MessageText:
//
// The installation of this driver is forbidden by system policy.
Contact your system administrator.
//
#define SPAPI_E_DRIVER_INSTALL_BLOCKED
_HRESULT_TYPEDEF_(0x800F0249L)
//
// MessageId: SPAPI_E_WRONG_INF_TYPE
//
// MessageText:
//
// The specified INF is the wrong type for this operation.
//
#define
SPAPI_E_WRONG_INF_TYPE
_HRESULT_TYPEDEF_(0x800F024AL)
//
// MessageId: SPAPI_E_FILE_HASH_NOT_IN_CATALOG
//
// MessageText:
//
// The hash for the file is not present in the specified catalog file.
The file is likely corrupt or the victim of tampering.
//
#define SPAPI_E_FILE_HASH_NOT_IN_CATALOG _HRESULT_TYPEDEF_(0x800F024BL)
//
// MessageId: SPAPI_E_DRIVER_STORE_DELETE_FAILED
//
// MessageText:
//
// A problem was encountered while attempting to delete the driver from
the store.
//
#define SPAPI_E_DRIVER_STORE_DELETE_FAILED
_HRESULT_TYPEDEF_(0x800F024CL)
//
// MessageId: SPAPI_E_UNRECOVERABLE_STACK_OVERFLOW
//
// MessageText:
//
// An unrecoverable stack overflow was encountered.
//
#define SPAPI_E_UNRECOVERABLE_STACK_OVERFLOW
_HRESULT_TYPEDEF_(0x800F0300L)
//
// MessageId: SPAPI_E_ERROR_NOT_INSTALLED
//
// MessageText:
//
// No installed components were detected.
//
#define
SPAPI_E_ERROR_NOT_INSTALLED
_HRESULT_TYPEDEF_(0x800F1000L)
//
*****************
// FACILITY_SCARD
// *****************
//
// =============================
// Facility SCARD Error Messages
// =============================
//
#define SCARD_S_SUCCESS NO_ERROR
//
// MessageId: SCARD_F_INTERNAL_ERROR
//
// MessageText:
//
// An internal consistency check failed.
//
#define
SCARD_F_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0x80100001L)
//
// MessageId: SCARD_E_CANCELLED
//
// MessageText:
//
// The action was cancelled by an SCardCancel request.
//
#define
SCARD_E_CANCELLED
_HRESULT_TYPEDEF_(0x80100002L)
//
// MessageId: SCARD_E_INVALID_HANDLE
//
// MessageText:
//
// The supplied handle was invalid.
//
#define
SCARD_E_INVALID_HANDLE
_HRESULT_TYPEDEF_(0x80100003L)
//
// MessageId: SCARD_E_INVALID_PARAMETER
//
// MessageText:
//
// One or more of the supplied parameters could not be properly
interpreted.
//
#define
SCARD_E_INVALID_PARAMETER
_HRESULT_TYPEDEF_(0x80100004L)
//
// MessageId: SCARD_E_INVALID_TARGET
//
// MessageText:
//
// Registry startup information is missing or invalid.
//
#define
SCARD_E_INVALID_TARGET
_HRESULT_TYPEDEF_(0x80100005L)
//
// MessageId: SCARD_E_NO_MEMORY
//
// MessageText:
//
// Not enough memory available to complete this command.
//
#define
SCARD_E_NO_MEMORY
_HRESULT_TYPEDEF_(0x80100006L)
//
// MessageId: SCARD_F_WAITED_TOO_LONG
//
// MessageText:
//
// An internal consistency timer has expired.
//
#define
SCARD_F_WAITED_TOO_LONG
_HRESULT_TYPEDEF_(0x80100007L)
//
// MessageId: SCARD_E_INSUFFICIENT_BUFFER
//
// MessageText:
//
// The data buffer to receive returned data is too small for the
returned data.
//
#define
SCARD_E_INSUFFICIENT_BUFFER
_HRESULT_TYPEDEF_(0x80100008L)
//
// MessageId: SCARD_E_UNKNOWN_READER
//
// MessageText:
//
// The specified reader name is not recognized.
//
#define
SCARD_E_UNKNOWN_READER
_HRESULT_TYPEDEF_(0x80100009L)
//
// MessageId: SCARD_E_TIMEOUT
//
// MessageText:
//
// The user-specified timeout value has expired.
//
#define
SCARD_E_TIMEOUT
_HRESULT_TYPEDEF_(0x8010000AL)
//
// MessageId: SCARD_E_SHARING_VIOLATION
//
// MessageText:
//
// The smart card cannot be accessed because of other connections
outstanding.
//
#define
SCARD_E_SHARING_VIOLATION
_HRESULT_TYPEDEF_(0x8010000BL)
//
// MessageId: SCARD_E_NO_SMARTCARD
//
// MessageText:
//
// The operation requires a Smart Card, but no Smart Card is currently
in the device.
//
#define
SCARD_E_NO_SMARTCARD
_HRESULT_TYPEDEF_(0x8010000CL)
//
// MessageId: SCARD_E_UNKNOWN_CARD
//
// MessageText:
//
// The specified smart card name is not recognized.
//
#define
SCARD_E_UNKNOWN_CARD
_HRESULT_TYPEDEF_(0x8010000DL)
//
// MessageId: SCARD_E_CANT_DISPOSE
//
// MessageText:
//
// The system could not dispose of the media in the requested manner.
//
#define
SCARD_E_CANT_DISPOSE
_HRESULT_TYPEDEF_(0x8010000EL)
//
// MessageId: SCARD_E_PROTO_MISMATCH
//
// MessageText:
//
// The requested protocols are incompatible with the protocol currently
in use with the smart card.
//
#define
SCARD_E_PROTO_MISMATCH
_HRESULT_TYPEDEF_(0x8010000FL)
//
// MessageId: SCARD_E_NOT_READY
//
// MessageText:
//
// The reader or smart card is not ready to accept commands.
//
#define
SCARD_E_NOT_READY
_HRESULT_TYPEDEF_(0x80100010L)
//
// MessageId: SCARD_E_INVALID_VALUE
//
// MessageText:
//
// One or more of the supplied parameters values could not be properly
interpreted.
//
#define
SCARD_E_INVALID_VALUE
_HRESULT_TYPEDEF_(0x80100011L)
//
// MessageId: SCARD_E_SYSTEM_CANCELLED
//
// MessageText:
//
// The action was cancelled by the system, presumably to log off or
shut down.
//
#define
SCARD_E_SYSTEM_CANCELLED
_HRESULT_TYPEDEF_(0x80100012L)
//
// MessageId: SCARD_F_COMM_ERROR
//
// MessageText:
//
// An internal communications error has been detected.
//
#define
SCARD_F_COMM_ERROR
_HRESULT_TYPEDEF_(0x80100013L)
//
// MessageId: SCARD_F_UNKNOWN_ERROR
//
// MessageText:
//
// An internal error has been detected, but the source is unknown.
//
#define
SCARD_F_UNKNOWN_ERROR
_HRESULT_TYPEDEF_(0x80100014L)
//
// MessageId: SCARD_E_INVALID_ATR
//
// MessageText:
//
// An ATR obtained from the registry is not a valid ATR string.
//
#define
SCARD_E_INVALID_ATR
_HRESULT_TYPEDEF_(0x80100015L)
//
// MessageId: SCARD_E_NOT_TRANSACTED
//
// MessageText:
//
// An attempt was made to end a non-existent transaction.
//
#define
SCARD_E_NOT_TRANSACTED
_HRESULT_TYPEDEF_(0x80100016L)
//
// MessageId: SCARD_E_READER_UNAVAILABLE
//
// MessageText:
//
// The specified reader is not currently available for use.
//
#define
SCARD_E_READER_UNAVAILABLE
_HRESULT_TYPEDEF_(0x80100017L)
//
// MessageId: SCARD_P_SHUTDOWN
//
// MessageText:
//
// The operation has been aborted to allow the server application to
exit.
//
#define
SCARD_P_SHUTDOWN
_HRESULT_TYPEDEF_(0x80100018L)
//
// MessageId: SCARD_E_PCI_TOO_SMALL
//
// MessageText:
//
// The PCI Receive buffer was too small.
//
#define
SCARD_E_PCI_TOO_SMALL
_HRESULT_TYPEDEF_(0x80100019L)
//
// MessageId: SCARD_E_READER_UNSUPPORTED
//
// MessageText:
//
// The reader driver does not meet minimal requirements for support.
//
#define
SCARD_E_READER_UNSUPPORTED
_HRESULT_TYPEDEF_(0x8010001AL)
//
// MessageId: SCARD_E_DUPLICATE_READER
//
// MessageText:
//
// The reader driver did not produce a unique reader name.
//
#define
SCARD_E_DUPLICATE_READER
_HRESULT_TYPEDEF_(0x8010001BL)
//
// MessageId: SCARD_E_CARD_UNSUPPORTED
//
// MessageText:
//
// The smart card does not meet minimal requirements for support.
//
#define
SCARD_E_CARD_UNSUPPORTED
_HRESULT_TYPEDEF_(0x8010001CL)
//
// MessageId: SCARD_E_NO_SERVICE
//
// MessageText:
//
// The Smart card resource manager is not running.
//
#define
SCARD_E_NO_SERVICE
_HRESULT_TYPEDEF_(0x8010001DL)
//
// MessageId: SCARD_E_SERVICE_STOPPED
//
// MessageText:
//
// The Smart card resource manager has shut down.
//
#define
SCARD_E_SERVICE_STOPPED
_HRESULT_TYPEDEF_(0x8010001EL)
//
// MessageId: SCARD_E_UNEXPECTED
//
// MessageText:
//
// An unexpected card error has occurred.
//
#define
SCARD_E_UNEXPECTED
_HRESULT_TYPEDEF_(0x8010001FL)
//
// MessageId: SCARD_E_ICC_INSTALLATION
//
// MessageText:
//
// No Primary Provider can be found for the smart card.
//
#define
SCARD_E_ICC_INSTALLATION
_HRESULT_TYPEDEF_(0x80100020L)
//
// MessageId: SCARD_E_ICC_CREATEORDER
//
// MessageText:
//
// The requested order of object creation is not supported.
//
#define
SCARD_E_ICC_CREATEORDER
_HRESULT_TYPEDEF_(0x80100021L)
//
// MessageId: SCARD_E_UNSUPPORTED_FEATURE
//
// MessageText:
//
// This smart card does not support the requested feature.
//
#define
SCARD_E_UNSUPPORTED_FEATURE
_HRESULT_TYPEDEF_(0x80100022L)
//
// MessageId: SCARD_E_DIR_NOT_FOUND
//
// MessageText:
//
// The identified directory does not exist in the smart card.
//
#define
SCARD_E_DIR_NOT_FOUND
_HRESULT_TYPEDEF_(0x80100023L)
//
// MessageId: SCARD_E_FILE_NOT_FOUND
//
// MessageText:
//
// The identified file does not exist in the smart card.
//
#define
SCARD_E_FILE_NOT_FOUND
_HRESULT_TYPEDEF_(0x80100024L)
//
// MessageId: SCARD_E_NO_DIR
//
// MessageText:
//
// The supplied path does not represent a smart card directory.
//
#define
SCARD_E_NO_DIR
_HRESULT_TYPEDEF_(0x80100025L)
//
// MessageId: SCARD_E_NO_FILE
//
// MessageText:
//
// The supplied path does not represent a smart card file.
//
#define
SCARD_E_NO_FILE
_HRESULT_TYPEDEF_(0x80100026L)
//
// MessageId: SCARD_E_NO_ACCESS
//
// MessageText:
//
// Access is denied to this file.
//
#define
SCARD_E_NO_ACCESS
_HRESULT_TYPEDEF_(0x80100027L)
//
// MessageId: SCARD_E_WRITE_TOO_MANY
//
// MessageText:
//
// The smartcard does not have enough memory to store the information.
//
#define
SCARD_E_WRITE_TOO_MANY
_HRESULT_TYPEDEF_(0x80100028L)
//
// MessageId: SCARD_E_BAD_SEEK
//
// MessageText:
//
// There was an error trying to set the smart card file object pointer.
//
#define
SCARD_E_BAD_SEEK
_HRESULT_TYPEDEF_(0x80100029L)
//
// MessageId: SCARD_E_INVALID_CHV
//
// MessageText:
//
// The supplied PIN is incorrect.
//
#define
SCARD_E_INVALID_CHV
_HRESULT_TYPEDEF_(0x8010002AL)
//
// MessageId: SCARD_E_UNKNOWN_RES_MNG
//
// MessageText:
//
// An unrecognized error code was returned from a layered component.
//
#define
SCARD_E_UNKNOWN_RES_MNG
_HRESULT_TYPEDEF_(0x8010002BL)
//
// MessageId: SCARD_E_NO_SUCH_CERTIFICATE
//
// MessageText:
//
// The requested certificate does not exist.
//
#define
SCARD_E_NO_SUCH_CERTIFICATE
_HRESULT_TYPEDEF_(0x8010002CL)
//
// MessageId: SCARD_E_CERTIFICATE_UNAVAILABLE
//
// MessageText:
//
// The requested certificate could not be obtained.
//
#define SCARD_E_CERTIFICATE_UNAVAILABLE
_HRESULT_TYPEDEF_(0x8010002DL)
//
// MessageId: SCARD_E_NO_READERS_AVAILABLE
//
// MessageText:
//
// Cannot find a smart card reader.
//
#define
SCARD_E_NO_READERS_AVAILABLE
_HRESULT_TYPEDEF_(0x8010002EL)
//
// MessageId: SCARD_E_COMM_DATA_LOST
//
// MessageText:
//
// A communications error with the smart card has been detected. Retry
the operation.
//
#define
SCARD_E_COMM_DATA_LOST
_HRESULT_TYPEDEF_(0x8010002FL)
//
// MessageId: SCARD_E_NO_KEY_CONTAINER
//
// MessageText:
//
// The requested key container does not exist on the smart card.
//
#define
SCARD_E_NO_KEY_CONTAINER
_HRESULT_TYPEDEF_(0x80100030L)
//
// MessageId: SCARD_E_SERVER_TOO_BUSY
//
// MessageText:
//
// The Smart card resource manager is too busy to complete this
operation.
//
#define
SCARD_E_SERVER_TOO_BUSY
_HRESULT_TYPEDEF_(0x80100031L)
//
// MessageId: SCARD_E_PIN_CACHE_EXPIRED
//
// MessageText:
//
// The smart card PIN cache has expired.
//
#define
SCARD_E_PIN_CACHE_EXPIRED
_HRESULT_TYPEDEF_(0x80100032L)
//
// MessageId: SCARD_E_NO_PIN_CACHE
//
// MessageText:
//
// The smart card PIN cannot be cached.
//
#define
SCARD_E_NO_PIN_CACHE
_HRESULT_TYPEDEF_(0x80100033L)
//
// MessageId: SCARD_E_READ_ONLY_CARD
//
// MessageText:
//
// The smart card is read only and cannot be written to.
//
#define
SCARD_E_READ_ONLY_CARD
_HRESULT_TYPEDEF_(0x80100034L)
//
// These are warning codes.
//
//
// MessageId: SCARD_W_UNSUPPORTED_CARD
//
// MessageText:
//
// The reader cannot communicate with the smart card, due to ATR
configuration conflicts.
//
#define
SCARD_W_UNSUPPORTED_CARD
_HRESULT_TYPEDEF_(0x80100065L)
//
// MessageId: SCARD_W_UNRESPONSIVE_CARD
//
// MessageText:
//
// The smart card is not responding to a reset.
//
#define
SCARD_W_UNRESPONSIVE_CARD
_HRESULT_TYPEDEF_(0x80100066L)
//
// MessageId: SCARD_W_UNPOWERED_CARD
//
// MessageText:
//
// Power has been removed from the smart card, so that further
communication is not possible.
//
#define
SCARD_W_UNPOWERED_CARD
_HRESULT_TYPEDEF_(0x80100067L)
//
// MessageId: SCARD_W_RESET_CARD
//
// MessageText:
//
// The smart card has been reset, so any shared state information is
invalid.
//
#define
SCARD_W_RESET_CARD
_HRESULT_TYPEDEF_(0x80100068L)
//
// MessageId: SCARD_W_REMOVED_CARD
//
// MessageText:
//
// The smart card has been removed, so that further communication is
not possible.
//
#define
SCARD_W_REMOVED_CARD
_HRESULT_TYPEDEF_(0x80100069L)
//
// MessageId: SCARD_W_SECURITY_VIOLATION
//
// MessageText:
//
// Access was denied because of a security violation.
//
#define
SCARD_W_SECURITY_VIOLATION
_HRESULT_TYPEDEF_(0x8010006AL)
//
// MessageId: SCARD_W_WRONG_CHV
//
// MessageText:
//
// The card cannot be accessed because the wrong PIN was presented.
//
#define
SCARD_W_WRONG_CHV
_HRESULT_TYPEDEF_(0x8010006BL)
//
// MessageId: SCARD_W_CHV_BLOCKED
//
// MessageText:
//
// The card cannot be accessed because the maximum number of PIN entry
attempts has been reached.
//
#define
SCARD_W_CHV_BLOCKED
_HRESULT_TYPEDEF_(0x8010006CL)
//
// MessageId: SCARD_W_EOF
//
// MessageText:
//
// The end of the smart card file has been reached.
//
#define
SCARD_W_EOF
_HRESULT_TYPEDEF_(0x8010006DL)
//
// MessageId: SCARD_W_CANCELLED_BY_USER
//
// MessageText:
//
// The action was cancelled by the user.
//
#define
SCARD_W_CANCELLED_BY_USER
_HRESULT_TYPEDEF_(0x8010006EL)
//
// MessageId: SCARD_W_CARD_NOT_AUTHENTICATED
//
// MessageText:
//
// No PIN was presented to the smart card.
//
#define SCARD_W_CARD_NOT_AUTHENTICATED
_HRESULT_TYPEDEF_(0x8010006FL)
//
// MessageId: SCARD_W_CACHE_ITEM_NOT_FOUND
//
// MessageText:
//
// The requested item could not be found in the cache.
//
#define
SCARD_W_CACHE_ITEM_NOT_FOUND
_HRESULT_TYPEDEF_(0x80100070L)
//
// MessageId: SCARD_W_CACHE_ITEM_STALE
//
// MessageText:
//
// The requested cache item is too old and was deleted from the cache.
//
#define
SCARD_W_CACHE_ITEM_STALE
_HRESULT_TYPEDEF_(0x80100071L)
//
// MessageId: SCARD_W_CACHE_ITEM_TOO_BIG
//
// MessageText:
//
// The new cache item exceeds the maximum per-item size defined for the
cache.
//
#define
SCARD_W_CACHE_ITEM_TOO_BIG
_HRESULT_TYPEDEF_(0x80100072L)
//
*****************
// FACILITY_COMPLUS
// *****************
//
// ===============================
// Facility COMPLUS Error Messages
// ===============================
//
//
// The following are the subranges within the COMPLUS facility
// 0x400 -
0x4ff
COMADMIN_E_CAT
// 0x600 -
0x6ff
COMQC errors
// 0x700 -
0x7ff
MSDTC errors
// 0x800 -
0x8ff
Other COMADMIN errors
//
// COMPLUS Admin errors
//
//
// MessageId: COMADMIN_E_OBJECTERRORS
//
// MessageText:
//
// Errors occurred accessing one or more objects - the ErrorInfo
collection may have more detail
//
#define
COMADMIN_E_OBJECTERRORS
_HRESULT_TYPEDEF_(0x80110401L)
//
// MessageId: COMADMIN_E_OBJECTINVALID
//
// MessageText:
//
// One or more of the object's properties are missing or invalid
//
#define
COMADMIN_E_OBJECTINVALID
_HRESULT_TYPEDEF_(0x80110402L)
//
// MessageId: COMADMIN_E_KEYMISSING
//
// MessageText:
//
// The object was not found in the catalog
//
#define
COMADMIN_E_KEYMISSING
_HRESULT_TYPEDEF_(0x80110403L)
//
// MessageId: COMADMIN_E_ALREADYINSTALLED
//
// MessageText:
//
// The object is already registered
//
#define
COMADMIN_E_ALREADYINSTALLED
_HRESULT_TYPEDEF_(0x80110404L)
//
// MessageId: COMADMIN_E_APP_FILE_WRITEFAIL
//
// MessageText:
//
// Error occurred writing to the application file
//
#define COMADMIN_E_APP_FILE_WRITEFAIL
_HRESULT_TYPEDEF_(0x80110407L)
//
// MessageId: COMADMIN_E_APP_FILE_READFAIL
//
// MessageText:
//
// Error occurred reading the application file
//
#define
COMADMIN_E_APP_FILE_READFAIL
_HRESULT_TYPEDEF_(0x80110408L)
//
// MessageId: COMADMIN_E_APP_FILE_VERSION
//
// MessageText:
//
// Invalid version number in application file
//
#define
COMADMIN_E_APP_FILE_VERSION
_HRESULT_TYPEDEF_(0x80110409L)
//
// MessageId: COMADMIN_E_BADPATH
//
// MessageText:
//
// The file path is invalid
//
#define
COMADMIN_E_BADPATH
_HRESULT_TYPEDEF_(0x8011040AL)
//
// MessageId: COMADMIN_E_APPLICATIONEXISTS
//
// MessageText:
//
// The application is already installed
//
#define
COMADMIN_E_APPLICATIONEXISTS
_HRESULT_TYPEDEF_(0x8011040BL)
//
// MessageId: COMADMIN_E_ROLEEXISTS
//
// MessageText:
//
// The role already exists
//
#define
COMADMIN_E_ROLEEXISTS
_HRESULT_TYPEDEF_(0x8011040CL)
//
// MessageId: COMADMIN_E_CANTCOPYFILE
//
// MessageText:
//
// An error occurred copying the file
//
#define
COMADMIN_E_CANTCOPYFILE
_HRESULT_TYPEDEF_(0x8011040DL)
//
// MessageId: COMADMIN_E_NOUSER
//
// MessageText:
//
// One or more users are not valid
//
#define
COMADMIN_E_NOUSER
_HRESULT_TYPEDEF_(0x8011040FL)
//
// MessageId: COMADMIN_E_INVALIDUSERIDS
//
// MessageText:
//
// One or more users in the application file are not valid
//
#define
COMADMIN_E_INVALIDUSERIDS
_HRESULT_TYPEDEF_(0x80110410L)
//
// MessageId: COMADMIN_E_NOREGISTRYCLSID
//
// MessageText:
//
// The component's CLSID is missing or corrupt
//
#define
COMADMIN_E_NOREGISTRYCLSID
_HRESULT_TYPEDEF_(0x80110411L)
//
// MessageId: COMADMIN_E_BADREGISTRYPROGID
//
// MessageText:
//
// The component's progID is missing or corrupt
//
#define
COMADMIN_E_BADREGISTRYPROGID
_HRESULT_TYPEDEF_(0x80110412L)
//
// MessageId: COMADMIN_E_AUTHENTICATIONLEVEL
//
// MessageText:
//
// Unable to set required authentication level for update request
//
#define COMADMIN_E_AUTHENTICATIONLEVEL
_HRESULT_TYPEDEF_(0x80110413L)
//
// MessageId: COMADMIN_E_USERPASSWDNOTVALID
//
// MessageText:
//
// The identity or password set on the application is not valid
//
#define COMADMIN_E_USERPASSWDNOTVALID
_HRESULT_TYPEDEF_(0x80110414L)
//
// MessageId: COMADMIN_E_CLSIDORIIDMISMATCH
//
// MessageText:
//
// Application file CLSIDs or IIDs do not match corresponding DLLs
//
#define COMADMIN_E_CLSIDORIIDMISMATCH
_HRESULT_TYPEDEF_(0x80110418L)
//
// MessageId: COMADMIN_E_REMOTEINTERFACE
//
// MessageText:
//
// Interface information is either missing or changed
//
#define
COMADMIN_E_REMOTEINTERFACE
_HRESULT_TYPEDEF_(0x80110419L)
//
// MessageId: COMADMIN_E_DLLREGISTERSERVER
//
// MessageText:
//
// DllRegisterServer failed on component install
//
#define
COMADMIN_E_DLLREGISTERSERVER
_HRESULT_TYPEDEF_(0x8011041AL)
//
// MessageId: COMADMIN_E_NOSERVERSHARE
//
// MessageText:
//
// No server file share available
//
#define
COMADMIN_E_NOSERVERSHARE
_HRESULT_TYPEDEF_(0x8011041BL)
//
// MessageId: COMADMIN_E_DLLLOADFAILED
//
// MessageText:
//
// DLL could not be loaded
//
#define
COMADMIN_E_DLLLOADFAILED
_HRESULT_TYPEDEF_(0x8011041DL)
//
// MessageId: COMADMIN_E_BADREGISTRYLIBID
//
// MessageText:
//
// The registered TypeLib ID is not valid
//
#define
COMADMIN_E_BADREGISTRYLIBID
_HRESULT_TYPEDEF_(0x8011041EL)
//
// MessageId: COMADMIN_E_APPDIRNOTFOUND
//
// MessageText:
//
// Application install directory not found
//
#define
COMADMIN_E_APPDIRNOTFOUND
_HRESULT_TYPEDEF_(0x8011041FL)
//
// MessageId: COMADMIN_E_REGISTRARFAILED
//
// MessageText:
//
// Errors occurred while in the component registrar
//
#define
COMADMIN_E_REGISTRARFAILED
_HRESULT_TYPEDEF_(0x80110423L)
//
// MessageId: COMADMIN_E_COMPFILE_DOESNOTEXIST
//
// MessageText:
//
// The file does not exist
//
#define COMADMIN_E_COMPFILE_DOESNOTEXIST _HRESULT_TYPEDEF_(0x80110424L)
//
// MessageId: COMADMIN_E_COMPFILE_LOADDLLFAIL
//
// MessageText:
//
// The DLL could not be loaded
//
#define COMADMIN_E_COMPFILE_LOADDLLFAIL
_HRESULT_TYPEDEF_(0x80110425L)
//
// MessageId: COMADMIN_E_COMPFILE_GETCLASSOBJ
//
// MessageText:
//
// GetClassObject failed in the DLL
//
#define COMADMIN_E_COMPFILE_GETCLASSOBJ
_HRESULT_TYPEDEF_(0x80110426L)
//
// MessageId: COMADMIN_E_COMPFILE_CLASSNOTAVAIL
//
// MessageText:
//
// The DLL does not support the components listed in the TypeLib
//
#define COMADMIN_E_COMPFILE_CLASSNOTAVAIL _HRESULT_TYPEDEF_(0x80110427L)
//
// MessageId: COMADMIN_E_COMPFILE_BADTLB
//
// MessageText:
//
// The TypeLib could not be loaded
//
#define
COMADMIN_E_COMPFILE_BADTLB
_HRESULT_TYPEDEF_(0x80110428L)
//
// MessageId: COMADMIN_E_COMPFILE_NOTINSTALLABLE
//
// MessageText:
//
// The file does not contain components or component information
//
#define COMADMIN_E_COMPFILE_NOTINSTALLABLE
_HRESULT_TYPEDEF_(0x80110429L)
//
// MessageId: COMADMIN_E_NOTCHANGEABLE
//
// MessageText:
//
// Changes to this object and its sub-objects have been disabled
//
#define
COMADMIN_E_NOTCHANGEABLE
_HRESULT_TYPEDEF_(0x8011042AL)
//
// MessageId: COMADMIN_E_NOTDELETEABLE
//
// MessageText:
//
// The delete function has been disabled for this object
//
#define
COMADMIN_E_NOTDELETEABLE
_HRESULT_TYPEDEF_(0x8011042BL)
//
// MessageId: COMADMIN_E_SESSION
//
// MessageText:
//
// The server catalog version is not supported
//
#define
COMADMIN_E_SESSION
_HRESULT_TYPEDEF_(0x8011042CL)
//
// MessageId: COMADMIN_E_COMP_MOVE_LOCKED
//
// MessageText:
//
//
The component move was disallowed, because the source or destination
application is either a system application or currently locked against
changes
//
#define
COMADMIN_E_COMP_MOVE_LOCKED
_HRESULT_TYPEDEF_(0x8011042DL)
//
// MessageId: COMADMIN_E_COMP_MOVE_BAD_DEST
//
// MessageText:
//
// The component move failed because the destination application no
longer exists
//
#define COMADMIN_E_COMP_MOVE_BAD_DEST
_HRESULT_TYPEDEF_(0x8011042EL)
//
// MessageId: COMADMIN_E_REGISTERTLB
//
// MessageText:
//
// The system was unable to register the TypeLib
//
#define
COMADMIN_E_REGISTERTLB
_HRESULT_TYPEDEF_(0x80110430L)
//
// MessageId: COMADMIN_E_SYSTEMAPP
//
// MessageText:
//
// This operation cannot be performed on the system application
//
#define
COMADMIN_E_SYSTEMAPP
_HRESULT_TYPEDEF_(0x80110433L)
//
// MessageId: COMADMIN_E_COMPFILE_NOREGISTRAR
//
// MessageText:
//
// The component registrar referenced in this file is not available
//
#define COMADMIN_E_COMPFILE_NOREGISTRAR
_HRESULT_TYPEDEF_(0x80110434L)
//
// MessageId: COMADMIN_E_COREQCOMPINSTALLED
//
// MessageText:
//
// A component in the same DLL is already installed
//
#define COMADMIN_E_COREQCOMPINSTALLED
_HRESULT_TYPEDEF_(0x80110435L)
//
// MessageId: COMADMIN_E_SERVICENOTINSTALLED
//
// MessageText:
//
// The service is not installed
//
#define COMADMIN_E_SERVICENOTINSTALLED
_HRESULT_TYPEDEF_(0x80110436L)
//
// MessageId: COMADMIN_E_PROPERTYSAVEFAILED
//
// MessageText:
//
// One or more property settings are either invalid or in conflict with
each other
//
#define COMADMIN_E_PROPERTYSAVEFAILED
_HRESULT_TYPEDEF_(0x80110437L)
//
// MessageId: COMADMIN_E_OBJECTEXISTS
//
// MessageText:
//
// The object you are attempting to add or rename already exists
//
#define
COMADMIN_E_OBJECTEXISTS
_HRESULT_TYPEDEF_(0x80110438L)
//
// MessageId: COMADMIN_E_COMPONENTEXISTS
//
// MessageText:
//
// The component already exists
//
#define
COMADMIN_E_COMPONENTEXISTS
_HRESULT_TYPEDEF_(0x80110439L)
//
// MessageId: COMADMIN_E_REGFILE_CORRUPT
//
// MessageText:
//
// The registration file is corrupt
//
#define
COMADMIN_E_REGFILE_CORRUPT
_HRESULT_TYPEDEF_(0x8011043BL)
//
// MessageId: COMADMIN_E_PROPERTY_OVERFLOW
//
// MessageText:
//
// The property value is too large
//
#define
COMADMIN_E_PROPERTY_OVERFLOW
_HRESULT_TYPEDEF_(0x8011043CL)
//
// MessageId: COMADMIN_E_NOTINREGISTRY
//
// MessageText:
//
// Object was not found in registry
//
#define
COMADMIN_E_NOTINREGISTRY
_HRESULT_TYPEDEF_(0x8011043EL)
//
// MessageId: COMADMIN_E_OBJECTNOTPOOLABLE
//
// MessageText:
//
// This object is not poolable
//
#define
COMADMIN_E_OBJECTNOTPOOLABLE
_HRESULT_TYPEDEF_(0x8011043FL)
//
// MessageId: COMADMIN_E_APPLID_MATCHES_CLSID
//
// MessageText:
//
// A CLSID with the same GUID as the new application ID is already
installed on this machine
//
#define COMADMIN_E_APPLID_MATCHES_CLSID
_HRESULT_TYPEDEF_(0x80110446L)
//
// MessageId: COMADMIN_E_ROLE_DOES_NOT_EXIST
//
// MessageText:
//
// A role assigned to a component, interface, or method did not exist
in the application
//
#define COMADMIN_E_ROLE_DOES_NOT_EXIST
_HRESULT_TYPEDEF_(0x80110447L)
//
// MessageId: COMADMIN_E_START_APP_NEEDS_COMPONENTS
//
// MessageText:
//
// You must have components in an application in order to start the
application
//
#define COMADMIN_E_START_APP_NEEDS_COMPONENTS
_HRESULT_TYPEDEF_(0x80110448L)
//
// MessageId: COMADMIN_E_REQUIRES_DIFFERENT_PLATFORM
//
// MessageText:
//
// This operation is not enabled on this platform
//
#define COMADMIN_E_REQUIRES_DIFFERENT_PLATFORM
_HRESULT_TYPEDEF_(0x80110449L)
//
// MessageId: COMADMIN_E_CAN_NOT_EXPORT_APP_PROXY
//
// MessageText:
//
// Application Proxy is not exportable
//
#define COMADMIN_E_CAN_NOT_EXPORT_APP_PROXY
_HRESULT_TYPEDEF_(0x8011044AL)
//
// MessageId: COMADMIN_E_CAN_NOT_START_APP
//
// MessageText:
//
// Failed to start application because it is either a library
application or an application proxy
//
#define
COMADMIN_E_CAN_NOT_START_APP
_HRESULT_TYPEDEF_(0x8011044BL)
//
// MessageId: COMADMIN_E_CAN_NOT_EXPORT_SYS_APP
//
// MessageText:
//
// System application is not exportable
//
#define COMADMIN_E_CAN_NOT_EXPORT_SYS_APP _HRESULT_TYPEDEF_(0x8011044CL)
//
// MessageId: COMADMIN_E_CANT_SUBSCRIBE_TO_COMPONENT
//
// MessageText:
//
// Cannot subscribe to this component (the component may have been
imported)
//
#define COMADMIN_E_CANT_SUBSCRIBE_TO_COMPONENT
_HRESULT_TYPEDEF_(0x8011044DL)
//
// MessageId: COMADMIN_E_EVENTCLASS_CANT_BE_SUBSCRIBER
//
// MessageText:
//
// An event class cannot also be a subscriber component
//
#define COMADMIN_E_EVENTCLASS_CANT_BE_SUBSCRIBER
_HRESULT_TYPEDEF_(0x8011044EL)
//
// MessageId: COMADMIN_E_LIB_APP_PROXY_INCOMPATIBLE
//
// MessageText:
//
// Library applications and application proxies are incompatible
//
#define COMADMIN_E_LIB_APP_PROXY_INCOMPATIBLE
_HRESULT_TYPEDEF_(0x8011044FL)
//
// MessageId: COMADMIN_E_BASE_PARTITION_ONLY
//
// MessageText:
//
// This function is valid for the base partition only
//
#define COMADMIN_E_BASE_PARTITION_ONLY
_HRESULT_TYPEDEF_(0x80110450L)
//
// MessageId: COMADMIN_E_START_APP_DISABLED
//
// MessageText:
//
// You cannot start an application that has been disabled
//
#define COMADMIN_E_START_APP_DISABLED
_HRESULT_TYPEDEF_(0x80110451L)
//
// MessageId: COMADMIN_E_CAT_DUPLICATE_PARTITION_NAME
//
// MessageText:
//
// The specified partition name is already in use on this computer
//
#define COMADMIN_E_CAT_DUPLICATE_PARTITION_NAME
_HRESULT_TYPEDEF_(0x80110457L)
//
// MessageId: COMADMIN_E_CAT_INVALID_PARTITION_NAME
//
// MessageText:
//
// The specified partition name is invalid. Check that the name
contains at least one visible character
//
#define COMADMIN_E_CAT_INVALID_PARTITION_NAME
_HRESULT_TYPEDEF_(0x80110458L)
//
// MessageId: COMADMIN_E_CAT_PARTITION_IN_USE
//
// MessageText:
//
// The partition cannot be deleted because it is the default partition
for one or more users
//
#define COMADMIN_E_CAT_PARTITION_IN_USE
_HRESULT_TYPEDEF_(0x80110459L)
//
// MessageId: COMADMIN_E_FILE_PARTITION_DUPLICATE_FILES
//
// MessageText:
//
// The partition cannot be exported, because one or more components in
the partition have the same file name
//
#define COMADMIN_E_FILE_PARTITION_DUPLICATE_FILES
_HRESULT_TYPEDEF_(0x8011045AL)
//
// MessageId: COMADMIN_E_CAT_IMPORTED_COMPONENTS_NOT_ALLOWED
//
// MessageText:
//
// Applications that contain one or more imported components cannot be
installed into a non-base partition
//
#define COMADMIN_E_CAT_IMPORTED_COMPONENTS_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x8011045BL)
//
// MessageId: COMADMIN_E_AMBIGUOUS_APPLICATION_NAME
//
// MessageText:
//
// The application name is not unique and cannot be resolved to an
application id
//
#define COMADMIN_E_AMBIGUOUS_APPLICATION_NAME
_HRESULT_TYPEDEF_(0x8011045CL)
//
// MessageId: COMADMIN_E_AMBIGUOUS_PARTITION_NAME
//
// MessageText:
//
// The partition name is not unique and cannot be resolved to a
partition id
//
#define COMADMIN_E_AMBIGUOUS_PARTITION_NAME
_HRESULT_TYPEDEF_(0x8011045DL)
//
// MessageId: COMADMIN_E_REGDB_NOTINITIALIZED
//
// MessageText:
//
// The COM+ registry database has not been initialized
//
#define COMADMIN_E_REGDB_NOTINITIALIZED
_HRESULT_TYPEDEF_(0x80110472L)
//
// MessageId: COMADMIN_E_REGDB_NOTOPEN
//
// MessageText:
//
// The COM+ registry database is not open
//
#define
COMADMIN_E_REGDB_NOTOPEN
_HRESULT_TYPEDEF_(0x80110473L)
//
// MessageId: COMADMIN_E_REGDB_SYSTEMERR
//
// MessageText:
//
// The COM+ registry database detected a system error
//
#define
COMADMIN_E_REGDB_SYSTEMERR
_HRESULT_TYPEDEF_(0x80110474L)
//
// MessageId: COMADMIN_E_REGDB_ALREADYRUNNING
//
// MessageText:
//
// The COM+ registry database is already running
//
#define COMADMIN_E_REGDB_ALREADYRUNNING
_HRESULT_TYPEDEF_(0x80110475L)
//
// MessageId: COMADMIN_E_MIG_VERSIONNOTSUPPORTED
//
// MessageText:
//
// This version of the COM+ registry database cannot be migrated
//
#define COMADMIN_E_MIG_VERSIONNOTSUPPORTED
_HRESULT_TYPEDEF_(0x80110480L)
//
// MessageId: COMADMIN_E_MIG_SCHEMANOTFOUND
//
// MessageText:
//
// The schema version to be migrated could not be found in the COM+
registry database
//
#define COMADMIN_E_MIG_SCHEMANOTFOUND
_HRESULT_TYPEDEF_(0x80110481L)
//
// MessageId: COMADMIN_E_CAT_BITNESSMISMATCH
//
// MessageText:
//
// There was a type mismatch between binaries
//
#define COMADMIN_E_CAT_BITNESSMISMATCH
_HRESULT_TYPEDEF_(0x80110482L)
//
// MessageId: COMADMIN_E_CAT_UNACCEPTABLEBITNESS
//
// MessageText:
//
// A binary of unknown or invalid type was provided
//
#define COMADMIN_E_CAT_UNACCEPTABLEBITNESS
_HRESULT_TYPEDEF_(0x80110483L)
//
// MessageId: COMADMIN_E_CAT_WRONGAPPBITNESS
//
// MessageText:
//
// There was a type mismatch between a binary and an application
//
#define COMADMIN_E_CAT_WRONGAPPBITNESS
_HRESULT_TYPEDEF_(0x80110484L)
//
// MessageId: COMADMIN_E_CAT_PAUSE_RESUME_NOT_SUPPORTED
//
// MessageText:
//
// The application cannot be paused or resumed
//
#define COMADMIN_E_CAT_PAUSE_RESUME_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80110485L)
//
// MessageId: COMADMIN_E_CAT_SERVERFAULT
//
// MessageText:
//
// The COM+ Catalog Server threw an exception during execution
//
#define
COMADMIN_E_CAT_SERVERFAULT
_HRESULT_TYPEDEF_(0x80110486L)
//
// COMPLUS Queued component errors
//
//
// MessageId: COMQC_E_APPLICATION_NOT_QUEUED
//
// MessageText:
//
// Only COM+ Applications marked "queued" can be invoked using the
"queue" moniker
//
#define COMQC_E_APPLICATION_NOT_QUEUED
_HRESULT_TYPEDEF_(0x80110600L)
//
// MessageId: COMQC_E_NO_QUEUEABLE_INTERFACES
//
// MessageText:
//
// At least one interface must be marked "queued" in order to create a
queued component instance with the "queue" moniker
//
#define COMQC_E_NO_QUEUEABLE_INTERFACES
_HRESULT_TYPEDEF_(0x80110601L)
//
// MessageId: COMQC_E_QUEUING_SERVICE_NOT_AVAILABLE
//
// MessageText:
//
// MSMQ is required for the requested operation and is not installed
//
#define COMQC_E_QUEUING_SERVICE_NOT_AVAILABLE
_HRESULT_TYPEDEF_(0x80110602L)
//
// MessageId: COMQC_E_NO_IPERSISTSTREAM
//
// MessageText:
//
// Unable to marshal an interface that does not support IPersistStream
//
#define
COMQC_E_NO_IPERSISTSTREAM
_HRESULT_TYPEDEF_(0x80110603L)
//
// MessageId: COMQC_E_BAD_MESSAGE
//
// MessageText:
//
// The message is improperly formatted or was damaged in transit
//
#define
COMQC_E_BAD_MESSAGE
_HRESULT_TYPEDEF_(0x80110604L)
//
// MessageId: COMQC_E_UNAUTHENTICATED
//
// MessageText:
//
// An unauthenticated message was received by an application that
accepts only authenticated messages
//
#define
COMQC_E_UNAUTHENTICATED
_HRESULT_TYPEDEF_(0x80110605L)
//
// MessageId: COMQC_E_UNTRUSTED_ENQUEUER
//
// MessageText:
//
// The message was requeued or moved by a user not in the "QC Trusted
User" role
//
#define
COMQC_E_UNTRUSTED_ENQUEUER
_HRESULT_TYPEDEF_(0x80110606L)
//
// The range 0x700-0x7ff is reserved for MSDTC errors.
//
//
// MessageId: MSDTC_E_DUPLICATE_RESOURCE
//
// MessageText:
//
// Cannot create a duplicate resource of type Distributed Transaction
Coordinator
//
#define
MSDTC_E_DUPLICATE_RESOURCE
_HRESULT_TYPEDEF_(0x80110701L)
//
// More COMADMIN errors from 0x8**
//
//
// MessageId: COMADMIN_E_OBJECT_PARENT_MISSING
//
// MessageText:
//
// One of the objects being inserted or updated does not belong to a
valid parent collection
//
#define COMADMIN_E_OBJECT_PARENT_MISSING _HRESULT_TYPEDEF_(0x80110808L)
//
// MessageId: COMADMIN_E_OBJECT_DOES_NOT_EXIST
//
// MessageText:
//
// One of the specified objects cannot be found
//
#define COMADMIN_E_OBJECT_DOES_NOT_EXIST _HRESULT_TYPEDEF_(0x80110809L)
//
// MessageId: COMADMIN_E_APP_NOT_RUNNING
//
// MessageText:
//
// The specified application is not currently running
//
#define
COMADMIN_E_APP_NOT_RUNNING
_HRESULT_TYPEDEF_(0x8011080AL)
//
// MessageId: COMADMIN_E_INVALID_PARTITION
//
// MessageText:
//
// The partition(s) specified are not valid.
//
#define
COMADMIN_E_INVALID_PARTITION
_HRESULT_TYPEDEF_(0x8011080BL)
//
// MessageId: COMADMIN_E_SVCAPP_NOT_POOLABLE_OR_RECYCLABLE
//
// MessageText:
//
// COM+ applications that run as NT service may not be pooled or
recycled
//
#define COMADMIN_E_SVCAPP_NOT_POOLABLE_OR_RECYCLABLE
_HRESULT_TYPEDEF_(0x8011080DL)
//
// MessageId: COMADMIN_E_USER_IN_SET
//
// MessageText:
//
// One or more users are already assigned to a local partition set.
//
#define
COMADMIN_E_USER_IN_SET
_HRESULT_TYPEDEF_(0x8011080EL)
//
// MessageId: COMADMIN_E_CANTRECYCLELIBRARYAPPS
//
// MessageText:
//
// Library applications may not be recycled.
//
#define COMADMIN_E_CANTRECYCLELIBRARYAPPS _HRESULT_TYPEDEF_(0x8011080FL)
//
// MessageId: COMADMIN_E_CANTRECYCLESERVICEAPPS
//
// MessageText:
//
// Applications running as NT services may not be recycled.
//
#define COMADMIN_E_CANTRECYCLESERVICEAPPS _HRESULT_TYPEDEF_(0x80110811L)
//
// MessageId: COMADMIN_E_PROCESSALREADYRECYCLED
//
// MessageText:
//
// The process has already been recycled.
//
#define COMADMIN_E_PROCESSALREADYRECYCLED _HRESULT_TYPEDEF_(0x80110812L)
//
// MessageId: COMADMIN_E_PAUSEDPROCESSMAYNOTBERECYCLED
//
// MessageText:
//
// A paused process may not be recycled.
//
#define COMADMIN_E_PAUSEDPROCESSMAYNOTBERECYCLED
_HRESULT_TYPEDEF_(0x80110813L)
//
// MessageId: COMADMIN_E_CANTMAKEINPROCSERVICE
//
// MessageText:
//
// Library applications may not be NT services.
//
#define COMADMIN_E_CANTMAKEINPROCSERVICE _HRESULT_TYPEDEF_(0x80110814L)
//
// MessageId: COMADMIN_E_PROGIDINUSEBYCLSID
//
// MessageText:
//
// The ProgID provided to the copy operation is invalid. The ProgID is
in use by another registered CLSID.
//
#define COMADMIN_E_PROGIDINUSEBYCLSID
_HRESULT_TYPEDEF_(0x80110815L)
//
// MessageId: COMADMIN_E_DEFAULT_PARTITION_NOT_IN_SET
//
// MessageText:
//
// The partition specified as default is not a member of the partition
set.
//
#define COMADMIN_E_DEFAULT_PARTITION_NOT_IN_SET
_HRESULT_TYPEDEF_(0x80110816L)
//
// MessageId: COMADMIN_E_RECYCLEDPROCESSMAYNOTBEPAUSED
//
// MessageText:
//
// A recycled process may not be paused.
//
#define COMADMIN_E_RECYCLEDPROCESSMAYNOTBEPAUSED
_HRESULT_TYPEDEF_(0x80110817L)
//
// MessageId: COMADMIN_E_PARTITION_ACCESSDENIED
//
// MessageText:
//
// Access to the specified partition is denied.
//
#define COMADMIN_E_PARTITION_ACCESSDENIED _HRESULT_TYPEDEF_(0x80110818L)
//
// MessageId: COMADMIN_E_PARTITION_MSI_ONLY
//
// MessageText:
//
// Only Application Files (*.MSI files) can be installed into
partitions.
//
#define COMADMIN_E_PARTITION_MSI_ONLY
_HRESULT_TYPEDEF_(0x80110819L)
//
// MessageId: COMADMIN_E_LEGACYCOMPS_NOT_ALLOWED_IN_1_0_FORMAT
//
// MessageText:
//
// Applications containing one or more legacy components may not be
exported to 1.0 format.
//
#define COMADMIN_E_LEGACYCOMPS_NOT_ALLOWED_IN_1_0_FORMAT
_HRESULT_TYPEDEF_(0x8011081AL)
//
// MessageId: COMADMIN_E_LEGACYCOMPS_NOT_ALLOWED_IN_NONBASE_PARTITIONS
//
// MessageText:
//
// Legacy components may not exist in non-base partitions.
//
#define COMADMIN_E_LEGACYCOMPS_NOT_ALLOWED_IN_NONBASE_PARTITIONS
_HRESULT_TYPEDEF_(0x8011081BL)
//
// MessageId: COMADMIN_E_COMP_MOVE_SOURCE
//
// MessageText:
//
// A component cannot be moved (or copied) from the System Application,
an application proxy or a non-changeable application
//
#define
COMADMIN_E_COMP_MOVE_SOURCE
_HRESULT_TYPEDEF_(0x8011081CL)
//
// MessageId: COMADMIN_E_COMP_MOVE_DEST
//
// MessageText:
//
// A component cannot be moved (or copied) to the System Application,
an application proxy or a non-changeable application
//
#define
COMADMIN_E_COMP_MOVE_DEST
_HRESULT_TYPEDEF_(0x8011081DL)
//
// MessageId: COMADMIN_E_COMP_MOVE_PRIVATE
//
// MessageText:
//
// A private component cannot be moved (or copied) to a library
application or to the base partition
//
#define
COMADMIN_E_COMP_MOVE_PRIVATE
_HRESULT_TYPEDEF_(0x8011081EL)
//
// MessageId: COMADMIN_E_BASEPARTITION_REQUIRED_IN_SET
//
// MessageText:
//
// The Base Application Partition exists in all partition sets and
cannot be removed.
//
#define COMADMIN_E_BASEPARTITION_REQUIRED_IN_SET
_HRESULT_TYPEDEF_(0x8011081FL)
//
// MessageId: COMADMIN_E_CANNOT_ALIAS_EVENTCLASS
//
// MessageText:
//
// Alas, Event Class components cannot be aliased.
//
#define COMADMIN_E_CANNOT_ALIAS_EVENTCLASS
_HRESULT_TYPEDEF_(0x80110820L)
//
// MessageId: COMADMIN_E_PRIVATE_ACCESSDENIED
//
// MessageText:
//
// Access is denied because the component is private.
//
#define COMADMIN_E_PRIVATE_ACCESSDENIED
_HRESULT_TYPEDEF_(0x80110821L)
//
// MessageId: COMADMIN_E_SAFERINVALID
//
// MessageText:
//
// The specified SAFER level is invalid.
//
#define
COMADMIN_E_SAFERINVALID
_HRESULT_TYPEDEF_(0x80110822L)
//
// MessageId: COMADMIN_E_REGISTRY_ACCESSDENIED
//
// MessageText:
//
// The specified user cannot write to the system registry
//
#define COMADMIN_E_REGISTRY_ACCESSDENIED _HRESULT_TYPEDEF_(0x80110823L)
//
// MessageId: COMADMIN_E_PARTITIONS_DISABLED
//
// MessageText:
//
// COM+ partitions are currently disabled.
//
#define COMADMIN_E_PARTITIONS_DISABLED
_HRESULT_TYPEDEF_(0x80110824L)
//
***********************
// FACILITY_USERMODE_FILTER_MANAGER
// ***********************
//
// Translation macro for converting FilterManager error codes only from:
// NTSTATUS
--> HRESULT
//
#define
FILTER_HRESULT_FROM_FLT_NTSTATUS(x) (ASSERT((x & 0xfff0000) ==
0x001c0000),(HRESULT) (((x) & 0x8000FFFF) |
(FACILITY_USERMODE_FILTER_MANAGER << 16)))
//
// MessageId: ERROR_FLT_IO_COMPLETE
//
// MessageText:
//
// The IO was completed by a filter.
//
#define
ERROR_FLT_IO_COMPLETE
_HRESULT_TYPEDEF_(0x001F0001L)
//
// MessageId: ERROR_FLT_NO_HANDLER_DEFINED
//
// MessageText:
//
// A handler was not defined by the filter for this operation.
//
#define
ERROR_FLT_NO_HANDLER_DEFINED
_HRESULT_TYPEDEF_(0x801F0001L)
//
// MessageId: ERROR_FLT_CONTEXT_ALREADY_DEFINED
//
// MessageText:
//
// A context is already defined for this object.
//
#define ERROR_FLT_CONTEXT_ALREADY_DEFINED _HRESULT_TYPEDEF_(0x801F0002L)
//
// MessageId: ERROR_FLT_INVALID_ASYNCHRONOUS_REQUEST
//
// MessageText:
//
// Asynchronous requests are not valid for this operation.
//
#define ERROR_FLT_INVALID_ASYNCHRONOUS_REQUEST
_HRESULT_TYPEDEF_(0x801F0003L)
//
// MessageId: ERROR_FLT_DISALLOW_FAST_IO
//
// MessageText:
//
// Disallow the Fast IO path for this operation.
//
#define
ERROR_FLT_DISALLOW_FAST_IO
_HRESULT_TYPEDEF_(0x801F0004L)
//
// MessageId: ERROR_FLT_INVALID_NAME_REQUEST
//
// MessageText:
//
// An invalid name request was made. The name requested cannot be
retrieved at this time.
//
#define ERROR_FLT_INVALID_NAME_REQUEST
_HRESULT_TYPEDEF_(0x801F0005L)
//
// MessageId: ERROR_FLT_NOT_SAFE_TO_POST_OPERATION
//
// MessageText:
//
//
Posting this operation to a worker thread for further processing is not
safe at this time because it could lead to a system deadlock.
//
#define ERROR_FLT_NOT_SAFE_TO_POST_OPERATION
_HRESULT_TYPEDEF_(0x801F0006L)
//
// MessageId: ERROR_FLT_NOT_INITIALIZED
//
// MessageText:
//
//
The Filter Manager was not initialized when a filter tried to register.
Make sure that the Filter Manager is getting loaded as a driver.
//
#define
ERROR_FLT_NOT_INITIALIZED
_HRESULT_TYPEDEF_(0x801F0007L)
//
// MessageId: ERROR_FLT_FILTER_NOT_READY
//
// MessageText:
//
//
The filter is not ready for attachment to volumes because it has not
finished initializing (FltStartFiltering has not been called).
//
#define
ERROR_FLT_FILTER_NOT_READY
_HRESULT_TYPEDEF_(0x801F0008L)
//
// MessageId: ERROR_FLT_POST_OPERATION_CLEANUP
//
// MessageText:
//
//
The filter must cleanup any operation specific context at this time
because it is being removed from the system before the operation is
completed by the lower drivers.
//
#define ERROR_FLT_POST_OPERATION_CLEANUP _HRESULT_TYPEDEF_(0x801F0009L)
//
// MessageId: ERROR_FLT_INTERNAL_ERROR
//
// MessageText:
//
//
The Filter Manager had an internal error from which it cannot recover,
therefore the operation has been failed. This is usually the result of
a filter returning an invalid value from a pre-operation callback.
//
#define
ERROR_FLT_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0x801F000AL)
//
// MessageId: ERROR_FLT_DELETING_OBJECT
//
// MessageText:
//
//
The object specified for this action is in the process of being
deleted, therefore the action requested cannot be completed at this
time.
//
#define
ERROR_FLT_DELETING_OBJECT
_HRESULT_TYPEDEF_(0x801F000BL)
//
// MessageId: ERROR_FLT_MUST_BE_NONPAGED_POOL
//
// MessageText:
//
// Non-paged pool must be used for this type of context.
//
#define ERROR_FLT_MUST_BE_NONPAGED_POOL
_HRESULT_TYPEDEF_(0x801F000CL)
//
// MessageId: ERROR_FLT_DUPLICATE_ENTRY
//
// MessageText:
//
// A duplicate handler definition has been provided for an operation.
//
#define
ERROR_FLT_DUPLICATE_ENTRY
_HRESULT_TYPEDEF_(0x801F000DL)
//
// MessageId: ERROR_FLT_CBDQ_DISABLED
//
// MessageText:
//
// The callback data queue has been disabled.
//
#define
ERROR_FLT_CBDQ_DISABLED
_HRESULT_TYPEDEF_(0x801F000EL)
//
// MessageId: ERROR_FLT_DO_NOT_ATTACH
//
// MessageText:
//
// Do not attach the filter to the volume at this time.
//
#define
ERROR_FLT_DO_NOT_ATTACH
_HRESULT_TYPEDEF_(0x801F000FL)
//
// MessageId: ERROR_FLT_DO_NOT_DETACH
//
// MessageText:
//
// Do not detach the filter from the volume at this time.
//
#define
ERROR_FLT_DO_NOT_DETACH
_HRESULT_TYPEDEF_(0x801F0010L)
//
// MessageId: ERROR_FLT_INSTANCE_ALTITUDE_COLLISION
//
// MessageText:
//
// An instance already exists at this altitude on the volume specified.
//
#define ERROR_FLT_INSTANCE_ALTITUDE_COLLISION
_HRESULT_TYPEDEF_(0x801F0011L)
//
// MessageId: ERROR_FLT_INSTANCE_NAME_COLLISION
//
// MessageText:
//
// An instance already exists with this name on the volume specified.
//
#define ERROR_FLT_INSTANCE_NAME_COLLISION _HRESULT_TYPEDEF_(0x801F0012L)
//
// MessageId: ERROR_FLT_FILTER_NOT_FOUND
//
// MessageText:
//
// The system could not find the filter specified.
//
#define
ERROR_FLT_FILTER_NOT_FOUND
_HRESULT_TYPEDEF_(0x801F0013L)
//
// MessageId: ERROR_FLT_VOLUME_NOT_FOUND
//
// MessageText:
//
// The system could not find the volume specified.
//
#define
ERROR_FLT_VOLUME_NOT_FOUND
_HRESULT_TYPEDEF_(0x801F0014L)
//
// MessageId: ERROR_FLT_INSTANCE_NOT_FOUND
//
// MessageText:
//
// The system could not find the instance specified.
//
#define
ERROR_FLT_INSTANCE_NOT_FOUND
_HRESULT_TYPEDEF_(0x801F0015L)
//
// MessageId: ERROR_FLT_CONTEXT_ALLOCATION_NOT_FOUND
//
// MessageText:
//
// No registered context allocation definition was found for the given
request.
//
#define ERROR_FLT_CONTEXT_ALLOCATION_NOT_FOUND
_HRESULT_TYPEDEF_(0x801F0016L)
//
// MessageId: ERROR_FLT_INVALID_CONTEXT_REGISTRATION
//
// MessageText:
//
// An invalid parameter was specified during context registration.
//
#define ERROR_FLT_INVALID_CONTEXT_REGISTRATION
_HRESULT_TYPEDEF_(0x801F0017L)
//
// MessageId: ERROR_FLT_NAME_CACHE_MISS
//
// MessageText:
//
// The name requested was not found in Filter Manager's name cache and
could not be retrieved from the file system.
//
#define
ERROR_FLT_NAME_CACHE_MISS
_HRESULT_TYPEDEF_(0x801F0018L)
//
// MessageId: ERROR_FLT_NO_DEVICE_OBJECT
//
// MessageText:
//
// The requested device object does not exist for the given volume.
//
#define
ERROR_FLT_NO_DEVICE_OBJECT
_HRESULT_TYPEDEF_(0x801F0019L)
//
// MessageId: ERROR_FLT_VOLUME_ALREADY_MOUNTED
//
// MessageText:
//
// The specified volume is already mounted.
//
#define ERROR_FLT_VOLUME_ALREADY_MOUNTED _HRESULT_TYPEDEF_(0x801F001AL)
//
// MessageId: ERROR_FLT_ALREADY_ENLISTED
//
// MessageText:
//
// The specified Transaction Context is already enlisted in a
transaction
//
#define
ERROR_FLT_ALREADY_ENLISTED
_HRESULT_TYPEDEF_(0x801F001BL)
//
// MessageId: ERROR_FLT_CONTEXT_ALREADY_LINKED
//
// MessageText:
//
// The specifiec context is already attached to another object
//
#define ERROR_FLT_CONTEXT_ALREADY_LINKED _HRESULT_TYPEDEF_(0x801F001CL)
//
// MessageId: ERROR_FLT_NO_WAITER_FOR_REPLY
//
// MessageText:
//
// No waiter is present for the filter's reply to this message.
//
#define ERROR_FLT_NO_WAITER_FOR_REPLY
_HRESULT_TYPEDEF_(0x801F0020L)
//
// ===============================
// Facility Graphics Error Messages
// ===============================
//
//
// The following are the subranges within the Graphics facility
//
// 0x0000 - 0x0fff Display
Driver Loader driver & Video Port errors (displdr.sys,
videoprt.sys)
//
0x1000 - 0x1fff Monitor Class
Function driver
errors
(monitor.sys)
// 0x2000 - 0x2fff Windows
Graphics Kernel Subsystem
errors
(dxgkrnl.sys)
//
0x3000 -
0x3fff
Desktop Window Manager errors
// 0x2000 -
0x20ff Common errors
// 0x2100 -
0x21ff Video Memory
Manager (VidMM) subsystem errors
// 0x2200 -
0x22ff Video GPU
Scheduler (VidSch) subsystem errors
// 0x2300 -
0x23ff Video Display
Mode Management (VidDMM) subsystem errors
//
// Display Driver Loader driver & Video Port errors
{0x0000..0x0fff}
//
//
// MessageId: ERROR_HUNG_DISPLAY_DRIVER_THREAD
//
// MessageText:
//
// {Display Driver Stopped Responding}
//
The %hs display driver has stopped working normally. Save your work and
reboot the system to restore full display functionality.
// The next time you reboot the machine a dialog will be displayed
giving you a chance to report this failure to Microsoft.
//
#define ERROR_HUNG_DISPLAY_DRIVER_THREAD _HRESULT_TYPEDEF_(0x80260001L)
//
// Desktop Window Manager errors {0x3000..0x3fff}
//
//
// MessageId: DWM_E_COMPOSITIONDISABLED
//
// MessageText:
//
// {Desktop composition is disabled}
// The operation could not be completed because desktop composition is
disabled.
//
#define
DWM_E_COMPOSITIONDISABLED
_HRESULT_TYPEDEF_(0x80263001L)
//
// MessageId: DWM_E_REMOTING_NOT_SUPPORTED
//
// MessageText:
//
// {Some desktop composition APIs are not supported while remoting}
// The operation is not supported while running in a remote session.
//
#define
DWM_E_REMOTING_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80263002L)
//
// MessageId: DWM_E_NO_REDIRECTION_SURFACE_AVAILABLE
//
// MessageText:
//
// {No DWM redirection surface is available}
// The DWM was unable to provide a redireciton surface to complete the
DirectX present.
//
#define DWM_E_NO_REDIRECTION_SURFACE_AVAILABLE
_HRESULT_TYPEDEF_(0x80263003L)
//
// MessageId: DWM_E_NOT_QUEUING_PRESENTS
//
// MessageText:
//
// {DWM is not queuing presents for the specified window}
// The window specified is not currently using queued presents.
//
#define
DWM_E_NOT_QUEUING_PRESENTS
_HRESULT_TYPEDEF_(0x80263004L)
//
// MessageId: DWM_E_ADAPTER_NOT_FOUND
//
// MessageText:
//
// {The adapter specified by the LUID is not found}
// DWM can not find the adapter specified by the LUID.
//
#define
DWM_E_ADAPTER_NOT_FOUND
_HRESULT_TYPEDEF_(0x80263005L)
//
// MessageId: DWM_S_GDI_REDIRECTION_SURFACE
//
// MessageText:
//
// {GDI redirection surface was returned}
// GDI redirection surface of the top level window was returned.
//
#define DWM_S_GDI_REDIRECTION_SURFACE
_HRESULT_TYPEDEF_(0x00263005L)
//
// Monitor class function driver errors {0x1000..0x1fff}
//
//
// MessageId: ERROR_MONITOR_NO_DESCRIPTOR
//
// MessageText:
//
// Monitor descriptor could not be obtained.
//
#define
ERROR_MONITOR_NO_DESCRIPTOR
_HRESULT_TYPEDEF_(0x00261001L)
//
// MessageId: ERROR_MONITOR_UNKNOWN_DESCRIPTOR_FORMAT
//
// MessageText:
//
// Format of the obtained monitor descriptor is not supported by this
release.
//
#define ERROR_MONITOR_UNKNOWN_DESCRIPTOR_FORMAT
_HRESULT_TYPEDEF_(0x00261002L)
//
// MessageId: ERROR_MONITOR_INVALID_DESCRIPTOR_CHECKSUM
//
// MessageText:
//
// Checksum of the obtained monitor descriptor is invalid.
//
#define ERROR_MONITOR_INVALID_DESCRIPTOR_CHECKSUM
_HRESULT_TYPEDEF_(0xC0261003L)
//
// MessageId: ERROR_MONITOR_INVALID_STANDARD_TIMING_BLOCK
//
// MessageText:
//
// Monitor descriptor contains an invalid standard timing block.
//
#define ERROR_MONITOR_INVALID_STANDARD_TIMING_BLOCK
_HRESULT_TYPEDEF_(0xC0261004L)
//
// MessageId: ERROR_MONITOR_WMI_DATABLOCK_REGISTRATION_FAILED
//
// MessageText:
//
// WMI data block registration failed for one of the MSMonitorClass WMI
subclasses.
//
#define ERROR_MONITOR_WMI_DATABLOCK_REGISTRATION_FAILED
_HRESULT_TYPEDEF_(0xC0261005L)
//
// MessageId: ERROR_MONITOR_INVALID_SERIAL_NUMBER_MONDSC_BLOCK
//
// MessageText:
//
// Provided monitor descriptor block is either corrupted or does not
contain monitor's detailed serial number.
//
#define ERROR_MONITOR_INVALID_SERIAL_NUMBER_MONDSC_BLOCK
_HRESULT_TYPEDEF_(0xC0261006L)
//
// MessageId: ERROR_MONITOR_INVALID_USER_FRIENDLY_MONDSC_BLOCK
//
// MessageText:
//
// Provided monitor descriptor block is either corrupted or does not
contain monitor's user friendly name.
//
#define ERROR_MONITOR_INVALID_USER_FRIENDLY_MONDSC_BLOCK
_HRESULT_TYPEDEF_(0xC0261007L)
//
// MessageId: ERROR_MONITOR_NO_MORE_DESCRIPTOR_DATA
//
// MessageText:
//
// There is no monitor descriptor data at the specified (offset, size)
region.
//
#define ERROR_MONITOR_NO_MORE_DESCRIPTOR_DATA
_HRESULT_TYPEDEF_(0xC0261008L)
//
// MessageId: ERROR_MONITOR_INVALID_DETAILED_TIMING_BLOCK
//
// MessageText:
//
// Monitor descriptor contains an invalid detailed timing block.
//
#define ERROR_MONITOR_INVALID_DETAILED_TIMING_BLOCK
_HRESULT_TYPEDEF_(0xC0261009L)
//
// MessageId: ERROR_MONITOR_INVALID_MANUFACTURE_DATE
//
// MessageText:
//
// Monitor descriptor contains invalid manufacture date.
//
#define ERROR_MONITOR_INVALID_MANUFACTURE_DATE
_HRESULT_TYPEDEF_(0xC026100AL)
//
// Windows Graphics Kernel Subsystem errors {0x2000..0x2fff}
//
// TODO: Add DXG Win32 errors here
//
// Common errors {0x2000..0x20ff}
//
//
// MessageId: ERROR_GRAPHICS_NOT_EXCLUSIVE_MODE_OWNER
//
// MessageText:
//
// Exclusive mode ownership is needed to create unmanaged primary
allocation.
//
#define ERROR_GRAPHICS_NOT_EXCLUSIVE_MODE_OWNER
_HRESULT_TYPEDEF_(0xC0262000L)
//
// MessageId: ERROR_GRAPHICS_INSUFFICIENT_DMA_BUFFER
//
// MessageText:
//
// The driver needs more DMA buffer space in order to complete the
requested operation.
//
#define ERROR_GRAPHICS_INSUFFICIENT_DMA_BUFFER
_HRESULT_TYPEDEF_(0xC0262001L)
//
// MessageId: ERROR_GRAPHICS_INVALID_DISPLAY_ADAPTER
//
// MessageText:
//
// Specified display adapter handle is invalid.
//
#define ERROR_GRAPHICS_INVALID_DISPLAY_ADAPTER
_HRESULT_TYPEDEF_(0xC0262002L)
//
// MessageId: ERROR_GRAPHICS_ADAPTER_WAS_RESET
//
// MessageText:
//
// Specified display adapter and all of its state has been reset.
//
#define ERROR_GRAPHICS_ADAPTER_WAS_RESET _HRESULT_TYPEDEF_(0xC0262003L)
//
// MessageId: ERROR_GRAPHICS_INVALID_DRIVER_MODEL
//
// MessageText:
//
// The driver stack doesn't match the expected driver model.
//
#define ERROR_GRAPHICS_INVALID_DRIVER_MODEL
_HRESULT_TYPEDEF_(0xC0262004L)
//
// MessageId: ERROR_GRAPHICS_PRESENT_MODE_CHANGED
//
// MessageText:
//
// Present happened but ended up into the changed desktop mode
//
#define ERROR_GRAPHICS_PRESENT_MODE_CHANGED
_HRESULT_TYPEDEF_(0xC0262005L)
//
// MessageId: ERROR_GRAPHICS_PRESENT_OCCLUDED
//
// MessageText:
//
// Nothing to present due to desktop occlusion
//
#define ERROR_GRAPHICS_PRESENT_OCCLUDED
_HRESULT_TYPEDEF_(0xC0262006L)
//
// MessageId: ERROR_GRAPHICS_PRESENT_DENIED
//
// MessageText:
//
// Not able to present due to denial of desktop access
//
#define ERROR_GRAPHICS_PRESENT_DENIED
_HRESULT_TYPEDEF_(0xC0262007L)
//
// MessageId: ERROR_GRAPHICS_CANNOTCOLORCONVERT
//
// MessageText:
//
// Not able to present with color convertion
//
#define ERROR_GRAPHICS_CANNOTCOLORCONVERT _HRESULT_TYPEDEF_(0xC0262008L)
//
// MessageId: ERROR_GRAPHICS_DRIVER_MISMATCH
//
// MessageText:
//
// The kernel driver detected a version mismatch between it and the
user mode driver.
//
#define ERROR_GRAPHICS_DRIVER_MISMATCH
_HRESULT_TYPEDEF_(0xC0262009L)
//
// MessageId: ERROR_GRAPHICS_PARTIAL_DATA_POPULATED
//
// MessageText:
//
//
Specified buffer is not big enough to contain entire requested dataset.
Partial data populated up to the size of the buffer. Caller needs to
provide buffer of size as specified in the partially populated buffer's
content (interface specific).
//
#define ERROR_GRAPHICS_PARTIAL_DATA_POPULATED
_HRESULT_TYPEDEF_(0x4026200AL)
//
// MessageId: ERROR_GRAPHICS_PRESENT_REDIRECTION_DISABLED
//
// MessageText:
//
// Present redirection is disabled (desktop windowing management
subsystem is off).
//
#define ERROR_GRAPHICS_PRESENT_REDIRECTION_DISABLED
_HRESULT_TYPEDEF_(0xC026200BL)
//
// MessageId: ERROR_GRAPHICS_PRESENT_UNOCCLUDED
//
// MessageText:
//
// Previous exclusive VidPn source owner has released its ownership
//
#define ERROR_GRAPHICS_PRESENT_UNOCCLUDED _HRESULT_TYPEDEF_(0xC026200CL)
//
// Video Memory Manager (VidMM) subsystem errors {0x2100..0x21ff}
//
//
// MessageId: ERROR_GRAPHICS_NO_VIDEO_MEMORY
//
// MessageText:
//
// Not enough video memory available to complete the operation.
//
#define ERROR_GRAPHICS_NO_VIDEO_MEMORY
_HRESULT_TYPEDEF_(0xC0262100L)
//
// MessageId: ERROR_GRAPHICS_CANT_LOCK_MEMORY
//
// MessageText:
//
// Couldn't probe and lock the underlying memory of an allocation.
//
#define ERROR_GRAPHICS_CANT_LOCK_MEMORY
_HRESULT_TYPEDEF_(0xC0262101L)
//
// MessageId: ERROR_GRAPHICS_ALLOCATION_BUSY
//
// MessageText:
//
// The allocation is currently busy.
//
#define ERROR_GRAPHICS_ALLOCATION_BUSY
_HRESULT_TYPEDEF_(0xC0262102L)
//
// MessageId: ERROR_GRAPHICS_TOO_MANY_REFERENCES
//
// MessageText:
//
// An object being referenced has reach the maximum reference count
already and can't be reference further.
//
#define ERROR_GRAPHICS_TOO_MANY_REFERENCES
_HRESULT_TYPEDEF_(0xC0262103L)
//
// MessageId: ERROR_GRAPHICS_TRY_AGAIN_LATER
//
// MessageText:
//
// A problem couldn't be solved due to some currently existing
condition. The problem should be tried again later.
//
#define ERROR_GRAPHICS_TRY_AGAIN_LATER
_HRESULT_TYPEDEF_(0xC0262104L)
//
// MessageId: ERROR_GRAPHICS_TRY_AGAIN_NOW
//
// MessageText:
//
// A problem couldn't be solved due to some currently existing
condition. The problem should be tried again immediately.
//
#define
ERROR_GRAPHICS_TRY_AGAIN_NOW
_HRESULT_TYPEDEF_(0xC0262105L)
//
// MessageId: ERROR_GRAPHICS_ALLOCATION_INVALID
//
// MessageText:
//
// The allocation is invalid.
//
#define ERROR_GRAPHICS_ALLOCATION_INVALID _HRESULT_TYPEDEF_(0xC0262106L)
//
// MessageId: ERROR_GRAPHICS_UNSWIZZLING_APERTURE_UNAVAILABLE
//
// MessageText:
//
// No more unswizzling aperture are currently available.
//
#define ERROR_GRAPHICS_UNSWIZZLING_APERTURE_UNAVAILABLE
_HRESULT_TYPEDEF_(0xC0262107L)
//
// MessageId: ERROR_GRAPHICS_UNSWIZZLING_APERTURE_UNSUPPORTED
//
// MessageText:
//
// The current allocation can't be unswizzled by an aperture.
//
#define ERROR_GRAPHICS_UNSWIZZLING_APERTURE_UNSUPPORTED
_HRESULT_TYPEDEF_(0xC0262108L)
//
// MessageId: ERROR_GRAPHICS_CANT_EVICT_PINNED_ALLOCATION
//
// MessageText:
//
// The request failed because a pinned allocation can't be evicted.
//
#define ERROR_GRAPHICS_CANT_EVICT_PINNED_ALLOCATION
_HRESULT_TYPEDEF_(0xC0262109L)
//
// MessageId: ERROR_GRAPHICS_INVALID_ALLOCATION_USAGE
//
// MessageText:
//
// The allocation can't be used from it's current segment location for
the specified operation.
//
#define ERROR_GRAPHICS_INVALID_ALLOCATION_USAGE
_HRESULT_TYPEDEF_(0xC0262110L)
//
// MessageId: ERROR_GRAPHICS_CANT_RENDER_LOCKED_ALLOCATION
//
// MessageText:
//
// A locked allocation can't be used in the current command buffer.
//
#define ERROR_GRAPHICS_CANT_RENDER_LOCKED_ALLOCATION
_HRESULT_TYPEDEF_(0xC0262111L)
//
// MessageId: ERROR_GRAPHICS_ALLOCATION_CLOSED
//
// MessageText:
//
// The allocation being referenced has been closed permanently.
//
#define ERROR_GRAPHICS_ALLOCATION_CLOSED _HRESULT_TYPEDEF_(0xC0262112L)
//
// MessageId: ERROR_GRAPHICS_INVALID_ALLOCATION_INSTANCE
//
// MessageText:
//
// An invalid allocation instance is being referenced.
//
#define ERROR_GRAPHICS_INVALID_ALLOCATION_INSTANCE
_HRESULT_TYPEDEF_(0xC0262113L)
//
// MessageId: ERROR_GRAPHICS_INVALID_ALLOCATION_HANDLE
//
// MessageText:
//
// An invalid allocation handle is being referenced.
//
#define ERROR_GRAPHICS_INVALID_ALLOCATION_HANDLE
_HRESULT_TYPEDEF_(0xC0262114L)
//
// MessageId: ERROR_GRAPHICS_WRONG_ALLOCATION_DEVICE
//
// MessageText:
//
// The allocation being referenced doesn't belong to the current device.
//
#define ERROR_GRAPHICS_WRONG_ALLOCATION_DEVICE
_HRESULT_TYPEDEF_(0xC0262115L)
//
// MessageId: ERROR_GRAPHICS_ALLOCATION_CONTENT_LOST
//
// MessageText:
//
// The specified allocation lost its content.
//
#define ERROR_GRAPHICS_ALLOCATION_CONTENT_LOST
_HRESULT_TYPEDEF_(0xC0262116L)
//
// Video GPU Scheduler (VidSch) subsystem errors {0x2200..0x22ff}
//
//
// MessageId: ERROR_GRAPHICS_GPU_EXCEPTION_ON_DEVICE
//
// MessageText:
//
// GPU exception is detected on the given device. The device is not
able to be scheduled.
//
#define ERROR_GRAPHICS_GPU_EXCEPTION_ON_DEVICE
_HRESULT_TYPEDEF_(0xC0262200L)
//
// Video Present Network Management (VidPNMgr) subsystem errors
{0x2300..0x23ff}
//
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDPN_TOPOLOGY
//
// MessageText:
//
// Specified VidPN topology is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDPN_TOPOLOGY
_HRESULT_TYPEDEF_(0xC0262300L)
//
// MessageId: ERROR_GRAPHICS_VIDPN_TOPOLOGY_NOT_SUPPORTED
//
// MessageText:
//
// Specified VidPN topology is valid but is not supported by this model
of the display adapter.
//
#define ERROR_GRAPHICS_VIDPN_TOPOLOGY_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262301L)
//
// MessageId: ERROR_GRAPHICS_VIDPN_TOPOLOGY_CURRENTLY_NOT_SUPPORTED
//
// MessageText:
//
//
Specified VidPN topology is valid but is not supported by the display
adapter at this time, due to current allocation of its resources.
//
#define ERROR_GRAPHICS_VIDPN_TOPOLOGY_CURRENTLY_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262302L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDPN
//
// MessageText:
//
// Specified VidPN handle is invalid.
//
#define
ERROR_GRAPHICS_INVALID_VIDPN
_HRESULT_TYPEDEF_(0xC0262303L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_SOURCE
//
// MessageText:
//
// Specified video present source is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_SOURCE
_HRESULT_TYPEDEF_(0xC0262304L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_TARGET
//
// MessageText:
//
// Specified video present target is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_TARGET
_HRESULT_TYPEDEF_(0xC0262305L)
//
// MessageId: ERROR_GRAPHICS_VIDPN_MODALITY_NOT_SUPPORTED
//
// MessageText:
//
// Specified VidPN modality is not supported (e.g. at least two of the
pinned modes are not cofunctional).
//
#define ERROR_GRAPHICS_VIDPN_MODALITY_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262306L)
//
// MessageId: ERROR_GRAPHICS_MODE_NOT_PINNED
//
// MessageText:
//
// No mode is pinned on the specified VidPN source/target.
//
#define ERROR_GRAPHICS_MODE_NOT_PINNED
_HRESULT_TYPEDEF_(0x00262307L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDPN_SOURCEMODESET
//
// MessageText:
//
// Specified VidPN source mode set is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDPN_SOURCEMODESET
_HRESULT_TYPEDEF_(0xC0262308L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDPN_TARGETMODESET
//
// MessageText:
//
// Specified VidPN target mode set is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDPN_TARGETMODESET
_HRESULT_TYPEDEF_(0xC0262309L)
//
// MessageId: ERROR_GRAPHICS_INVALID_FREQUENCY
//
// MessageText:
//
// Specified video signal frequency is invalid.
//
#define ERROR_GRAPHICS_INVALID_FREQUENCY _HRESULT_TYPEDEF_(0xC026230AL)
//
// MessageId: ERROR_GRAPHICS_INVALID_ACTIVE_REGION
//
// MessageText:
//
// Specified video signal active region is invalid.
//
#define ERROR_GRAPHICS_INVALID_ACTIVE_REGION
_HRESULT_TYPEDEF_(0xC026230BL)
//
// MessageId: ERROR_GRAPHICS_INVALID_TOTAL_REGION
//
// MessageText:
//
// Specified video signal total region is invalid.
//
#define ERROR_GRAPHICS_INVALID_TOTAL_REGION
_HRESULT_TYPEDEF_(0xC026230CL)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_SOURCE_MODE
//
// MessageText:
//
// Specified video present source mode is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_SOURCE_MODE
_HRESULT_TYPEDEF_(0xC0262310L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_TARGET_MODE
//
// MessageText:
//
// Specified video present target mode is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDEO_PRESENT_TARGET_MODE
_HRESULT_TYPEDEF_(0xC0262311L)
//
// MessageId: ERROR_GRAPHICS_PINNED_MODE_MUST_REMAIN_IN_SET
//
// MessageText:
//
// Pinned mode must remain in the set on VidPN's cofunctional modality
enumeration.
//
#define ERROR_GRAPHICS_PINNED_MODE_MUST_REMAIN_IN_SET
_HRESULT_TYPEDEF_(0xC0262312L)
//
// MessageId: ERROR_GRAPHICS_PATH_ALREADY_IN_TOPOLOGY
//
// MessageText:
//
// Specified video present path is already in VidPN's topology.
//
#define ERROR_GRAPHICS_PATH_ALREADY_IN_TOPOLOGY
_HRESULT_TYPEDEF_(0xC0262313L)
//
// MessageId: ERROR_GRAPHICS_MODE_ALREADY_IN_MODESET
//
// MessageText:
//
// Specified mode is already in the mode set.
//
#define ERROR_GRAPHICS_MODE_ALREADY_IN_MODESET
_HRESULT_TYPEDEF_(0xC0262314L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDEOPRESENTSOURCESET
//
// MessageText:
//
// Specified video present source set is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDEOPRESENTSOURCESET
_HRESULT_TYPEDEF_(0xC0262315L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDEOPRESENTTARGETSET
//
// MessageText:
//
// Specified video present target set is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDEOPRESENTTARGETSET
_HRESULT_TYPEDEF_(0xC0262316L)
//
// MessageId: ERROR_GRAPHICS_SOURCE_ALREADY_IN_SET
//
// MessageText:
//
// Specified video present source is already in the video present
source set.
//
#define ERROR_GRAPHICS_SOURCE_ALREADY_IN_SET
_HRESULT_TYPEDEF_(0xC0262317L)
//
// MessageId: ERROR_GRAPHICS_TARGET_ALREADY_IN_SET
//
// MessageText:
//
// Specified video present target is already in the video present
target set.
//
#define ERROR_GRAPHICS_TARGET_ALREADY_IN_SET
_HRESULT_TYPEDEF_(0xC0262318L)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDPN_PRESENT_PATH
//
// MessageText:
//
// Specified VidPN present path is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDPN_PRESENT_PATH
_HRESULT_TYPEDEF_(0xC0262319L)
//
// MessageId: ERROR_GRAPHICS_NO_RECOMMENDED_VIDPN_TOPOLOGY
//
// MessageText:
//
// Miniport has no recommendation for augmentation of the specified
VidPN's topology.
//
#define ERROR_GRAPHICS_NO_RECOMMENDED_VIDPN_TOPOLOGY
_HRESULT_TYPEDEF_(0xC026231AL)
//
// MessageId: ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGESET
//
// MessageText:
//
// Specified monitor frequency range set is invalid.
//
#define ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGESET
_HRESULT_TYPEDEF_(0xC026231BL)
//
// MessageId: ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE
//
// MessageText:
//
// Specified monitor frequency range is invalid.
//
#define ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE
_HRESULT_TYPEDEF_(0xC026231CL)
//
// MessageId: ERROR_GRAPHICS_FREQUENCYRANGE_NOT_IN_SET
//
// MessageText:
//
// Specified frequency range is not in the specified monitor frequency
range set.
//
#define ERROR_GRAPHICS_FREQUENCYRANGE_NOT_IN_SET
_HRESULT_TYPEDEF_(0xC026231DL)
//
// MessageId: ERROR_GRAPHICS_NO_PREFERRED_MODE
//
// MessageText:
//
// Specified mode set does not specify preference for one of its modes.
//
#define ERROR_GRAPHICS_NO_PREFERRED_MODE _HRESULT_TYPEDEF_(0x0026231EL)
//
// MessageId: ERROR_GRAPHICS_FREQUENCYRANGE_ALREADY_IN_SET
//
// MessageText:
//
// Specified frequency range is already in the specified monitor
frequency range set.
//
#define ERROR_GRAPHICS_FREQUENCYRANGE_ALREADY_IN_SET
_HRESULT_TYPEDEF_(0xC026231FL)
//
// MessageId: ERROR_GRAPHICS_STALE_MODESET
//
// MessageText:
//
// Specified mode set is stale. Please reacquire the new mode set.
//
#define
ERROR_GRAPHICS_STALE_MODESET
_HRESULT_TYPEDEF_(0xC0262320L)
//
// MessageId: ERROR_GRAPHICS_INVALID_MONITOR_SOURCEMODESET
//
// MessageText:
//
// Specified monitor source mode set is invalid.
//
#define ERROR_GRAPHICS_INVALID_MONITOR_SOURCEMODESET
_HRESULT_TYPEDEF_(0xC0262321L)
//
// MessageId: ERROR_GRAPHICS_INVALID_MONITOR_SOURCE_MODE
//
// MessageText:
//
// Specified monitor source mode is invalid.
//
#define ERROR_GRAPHICS_INVALID_MONITOR_SOURCE_MODE
_HRESULT_TYPEDEF_(0xC0262322L)
//
// MessageId: ERROR_GRAPHICS_NO_RECOMMENDED_FUNCTIONAL_VIDPN
//
// MessageText:
//
//
Miniport does not have any recommendation regarding the request to
provide a functional VidPN given the current display adapter
configuration.
//
#define ERROR_GRAPHICS_NO_RECOMMENDED_FUNCTIONAL_VIDPN
_HRESULT_TYPEDEF_(0xC0262323L)
//
// MessageId: ERROR_GRAPHICS_MODE_ID_MUST_BE_UNIQUE
//
// MessageText:
//
// ID of the specified mode is already used by another mode in the set.
//
#define ERROR_GRAPHICS_MODE_ID_MUST_BE_UNIQUE
_HRESULT_TYPEDEF_(0xC0262324L)
//
// MessageId:
ERROR_GRAPHICS_EMPTY_ADAPTER_MONITOR_MODE_SUPPORT_INTERSECTION
//
// MessageText:
//
// System failed to determine a mode that is supported by both the
display adapter and the monitor connected to it.
//
#define ERROR_GRAPHICS_EMPTY_ADAPTER_MONITOR_MODE_SUPPORT_INTERSECTION
_HRESULT_TYPEDEF_(0xC0262325L)
//
// MessageId: ERROR_GRAPHICS_VIDEO_PRESENT_TARGETS_LESS_THAN_SOURCES
//
// MessageText:
//
// Number of video present targets must be greater than or equal to the
number of video present sources.
//
#define ERROR_GRAPHICS_VIDEO_PRESENT_TARGETS_LESS_THAN_SOURCES
_HRESULT_TYPEDEF_(0xC0262326L)
//
// MessageId: ERROR_GRAPHICS_PATH_NOT_IN_TOPOLOGY
//
// MessageText:
//
// Specified present path is not in VidPN's topology.
//
#define ERROR_GRAPHICS_PATH_NOT_IN_TOPOLOGY
_HRESULT_TYPEDEF_(0xC0262327L)
//
// MessageId: ERROR_GRAPHICS_ADAPTER_MUST_HAVE_AT_LEAST_ONE_SOURCE
//
// MessageText:
//
// Display adapter must have at least one video present source.
//
#define ERROR_GRAPHICS_ADAPTER_MUST_HAVE_AT_LEAST_ONE_SOURCE
_HRESULT_TYPEDEF_(0xC0262328L)
//
// MessageId: ERROR_GRAPHICS_ADAPTER_MUST_HAVE_AT_LEAST_ONE_TARGET
//
// MessageText:
//
// Display adapter must have at least one video present target.
//
#define ERROR_GRAPHICS_ADAPTER_MUST_HAVE_AT_LEAST_ONE_TARGET
_HRESULT_TYPEDEF_(0xC0262329L)
//
// MessageId: ERROR_GRAPHICS_INVALID_MONITORDESCRIPTORSET
//
// MessageText:
//
// Specified monitor descriptor set is invalid.
//
#define ERROR_GRAPHICS_INVALID_MONITORDESCRIPTORSET
_HRESULT_TYPEDEF_(0xC026232AL)
//
// MessageId: ERROR_GRAPHICS_INVALID_MONITORDESCRIPTOR
//
// MessageText:
//
// Specified monitor descriptor is invalid.
//
#define ERROR_GRAPHICS_INVALID_MONITORDESCRIPTOR
_HRESULT_TYPEDEF_(0xC026232BL)
//
// MessageId: ERROR_GRAPHICS_MONITORDESCRIPTOR_NOT_IN_SET
//
// MessageText:
//
// Specified descriptor is not in the specified monitor descriptor set.
//
#define ERROR_GRAPHICS_MONITORDESCRIPTOR_NOT_IN_SET
_HRESULT_TYPEDEF_(0xC026232CL)
//
// MessageId: ERROR_GRAPHICS_MONITORDESCRIPTOR_ALREADY_IN_SET
//
// MessageText:
//
// Specified descriptor is already in the specified monitor descriptor
set.
//
#define ERROR_GRAPHICS_MONITORDESCRIPTOR_ALREADY_IN_SET
_HRESULT_TYPEDEF_(0xC026232DL)
//
// MessageId: ERROR_GRAPHICS_MONITORDESCRIPTOR_ID_MUST_BE_UNIQUE
//
// MessageText:
//
// ID of the specified monitor descriptor is already used by another
descriptor in the set.
//
#define ERROR_GRAPHICS_MONITORDESCRIPTOR_ID_MUST_BE_UNIQUE
_HRESULT_TYPEDEF_(0xC026232EL)
//
// MessageId: ERROR_GRAPHICS_INVALID_VIDPN_TARGET_SUBSET_TYPE
//
// MessageText:
//
// Specified video present target subset type is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDPN_TARGET_SUBSET_TYPE
_HRESULT_TYPEDEF_(0xC026232FL)
//
// MessageId: ERROR_GRAPHICS_RESOURCES_NOT_RELATED
//
// MessageText:
//
// Two or more of the specified resources are not related to each
other, as defined by the interface semantics.
//
#define ERROR_GRAPHICS_RESOURCES_NOT_RELATED
_HRESULT_TYPEDEF_(0xC0262330L)
//
// MessageId: ERROR_GRAPHICS_SOURCE_ID_MUST_BE_UNIQUE
//
// MessageText:
//
// ID of the specified video present source is already used by another
source in the set.
//
#define ERROR_GRAPHICS_SOURCE_ID_MUST_BE_UNIQUE
_HRESULT_TYPEDEF_(0xC0262331L)
//
// MessageId: ERROR_GRAPHICS_TARGET_ID_MUST_BE_UNIQUE
//
// MessageText:
//
// ID of the specified video present target is already used by another
target in the set.
//
#define ERROR_GRAPHICS_TARGET_ID_MUST_BE_UNIQUE
_HRESULT_TYPEDEF_(0xC0262332L)
//
// MessageId: ERROR_GRAPHICS_NO_AVAILABLE_VIDPN_TARGET
//
// MessageText:
//
// Specified VidPN source cannot be used because there is no available
VidPN target to connect it to.
//
#define ERROR_GRAPHICS_NO_AVAILABLE_VIDPN_TARGET
_HRESULT_TYPEDEF_(0xC0262333L)
//
// MessageId:
ERROR_GRAPHICS_MONITOR_COULD_NOT_BE_ASSOCIATED_WITH_ADAPTER
//
// MessageText:
//
// Newly arrived monitor could not be associated with a display adapter.
//
#define ERROR_GRAPHICS_MONITOR_COULD_NOT_BE_ASSOCIATED_WITH_ADAPTER
_HRESULT_TYPEDEF_(0xC0262334L)
//
// MessageId: ERROR_GRAPHICS_NO_VIDPNMGR
//
// MessageText:
//
// Display adapter in question does not have an associated VidPN
manager.
//
#define
ERROR_GRAPHICS_NO_VIDPNMGR
_HRESULT_TYPEDEF_(0xC0262335L)
//
// MessageId: ERROR_GRAPHICS_NO_ACTIVE_VIDPN
//
// MessageText:
//
// VidPN manager of the display adapter in question does not have an
active VidPN.
//
#define ERROR_GRAPHICS_NO_ACTIVE_VIDPN
_HRESULT_TYPEDEF_(0xC0262336L)
//
// MessageId: ERROR_GRAPHICS_STALE_VIDPN_TOPOLOGY
//
// MessageText:
//
// Specified VidPN topology is stale. Please reacquire the new topology.
//
#define ERROR_GRAPHICS_STALE_VIDPN_TOPOLOGY
_HRESULT_TYPEDEF_(0xC0262337L)
//
// MessageId: ERROR_GRAPHICS_MONITOR_NOT_CONNECTED
//
// MessageText:
//
// There is no monitor connected on the specified video present target.
//
#define ERROR_GRAPHICS_MONITOR_NOT_CONNECTED
_HRESULT_TYPEDEF_(0xC0262338L)
//
// MessageId: ERROR_GRAPHICS_SOURCE_NOT_IN_TOPOLOGY
//
// MessageText:
//
// Specified source is not part of the specified VidPN's topology.
//
#define ERROR_GRAPHICS_SOURCE_NOT_IN_TOPOLOGY
_HRESULT_TYPEDEF_(0xC0262339L)
//
// MessageId: ERROR_GRAPHICS_INVALID_PRIMARYSURFACE_SIZE
//
// MessageText:
//
// Specified primary surface size is invalid.
//
#define ERROR_GRAPHICS_INVALID_PRIMARYSURFACE_SIZE
_HRESULT_TYPEDEF_(0xC026233AL)
//
// MessageId: ERROR_GRAPHICS_INVALID_VISIBLEREGION_SIZE
//
// MessageText:
//
// Specified visible region size is invalid.
//
#define ERROR_GRAPHICS_INVALID_VISIBLEREGION_SIZE
_HRESULT_TYPEDEF_(0xC026233BL)
//
// MessageId: ERROR_GRAPHICS_INVALID_STRIDE
//
// MessageText:
//
// Specified stride is invalid.
//
#define ERROR_GRAPHICS_INVALID_STRIDE
_HRESULT_TYPEDEF_(0xC026233CL)
//
// MessageId: ERROR_GRAPHICS_INVALID_PIXELFORMAT
//
// MessageText:
//
// Specified pixel format is invalid.
//
#define ERROR_GRAPHICS_INVALID_PIXELFORMAT
_HRESULT_TYPEDEF_(0xC026233DL)
//
// MessageId: ERROR_GRAPHICS_INVALID_COLORBASIS
//
// MessageText:
//
// Specified color basis is invalid.
//
#define ERROR_GRAPHICS_INVALID_COLORBASIS _HRESULT_TYPEDEF_(0xC026233EL)
//
// MessageId: ERROR_GRAPHICS_INVALID_PIXELVALUEACCESSMODE
//
// MessageText:
//
// Specified pixel value access mode is invalid.
//
#define ERROR_GRAPHICS_INVALID_PIXELVALUEACCESSMODE
_HRESULT_TYPEDEF_(0xC026233FL)
//
// MessageId: ERROR_GRAPHICS_TARGET_NOT_IN_TOPOLOGY
//
// MessageText:
//
// Specified target is not part of the specified VidPN's topology.
//
#define ERROR_GRAPHICS_TARGET_NOT_IN_TOPOLOGY
_HRESULT_TYPEDEF_(0xC0262340L)
//
// MessageId: ERROR_GRAPHICS_NO_DISPLAY_MODE_MANAGEMENT_SUPPORT
//
// MessageText:
//
// Failed to acquire display mode management interface.
//
#define ERROR_GRAPHICS_NO_DISPLAY_MODE_MANAGEMENT_SUPPORT
_HRESULT_TYPEDEF_(0xC0262341L)
//
// MessageId: ERROR_GRAPHICS_VIDPN_SOURCE_IN_USE
//
// MessageText:
//
// Specified VidPN source is already owned by a DMM client and cannot
be used until that client releases it.
//
#define ERROR_GRAPHICS_VIDPN_SOURCE_IN_USE
_HRESULT_TYPEDEF_(0xC0262342L)
//
// MessageId: ERROR_GRAPHICS_CANT_ACCESS_ACTIVE_VIDPN
//
// MessageText:
//
// Specified VidPN is active and cannot be accessed.
//
#define ERROR_GRAPHICS_CANT_ACCESS_ACTIVE_VIDPN
_HRESULT_TYPEDEF_(0xC0262343L)
//
// MessageId: ERROR_GRAPHICS_INVALID_PATH_IMPORTANCE_ORDINAL
//
// MessageText:
//
// Specified VidPN present path importance ordinal is invalid.
//
#define ERROR_GRAPHICS_INVALID_PATH_IMPORTANCE_ORDINAL
_HRESULT_TYPEDEF_(0xC0262344L)
//
// MessageId:
ERROR_GRAPHICS_INVALID_PATH_CONTENT_GEOMETRY_TRANSFORMATION
//
// MessageText:
//
// Specified VidPN present path content geometry transformation is
invalid.
//
#define ERROR_GRAPHICS_INVALID_PATH_CONTENT_GEOMETRY_TRANSFORMATION
_HRESULT_TYPEDEF_(0xC0262345L)
//
// MessageId:
ERROR_GRAPHICS_PATH_CONTENT_GEOMETRY_TRANSFORMATION_NOT_SUPPORTED
//
// MessageText:
//
// Specified content geometry transformation is not supported on the
respective VidPN present path.
//
#define
ERROR_GRAPHICS_PATH_CONTENT_GEOMETRY_TRANSFORMATION_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262346L)
//
// MessageId: ERROR_GRAPHICS_INVALID_GAMMA_RAMP
//
// MessageText:
//
// Specified gamma ramp is invalid.
//
#define ERROR_GRAPHICS_INVALID_GAMMA_RAMP _HRESULT_TYPEDEF_(0xC0262347L)
//
// MessageId: ERROR_GRAPHICS_GAMMA_RAMP_NOT_SUPPORTED
//
// MessageText:
//
// Specified gamma ramp is not supported on the respective VidPN
present path.
//
#define ERROR_GRAPHICS_GAMMA_RAMP_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262348L)
//
// MessageId: ERROR_GRAPHICS_MULTISAMPLING_NOT_SUPPORTED
//
// MessageText:
//
// Multi-sampling is not supported on the respective VidPN present path.
//
#define ERROR_GRAPHICS_MULTISAMPLING_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262349L)
//
// MessageId: ERROR_GRAPHICS_MODE_NOT_IN_MODESET
//
// MessageText:
//
// Specified mode is not in the specified mode set.
//
#define ERROR_GRAPHICS_MODE_NOT_IN_MODESET
_HRESULT_TYPEDEF_(0xC026234AL)
//
// MessageId: ERROR_GRAPHICS_DATASET_IS_EMPTY
//
// MessageText:
//
// Specified data set (e.g. mode set, frequency range set, descriptor
set, topology, etc.) is empty.
//
#define ERROR_GRAPHICS_DATASET_IS_EMPTY
_HRESULT_TYPEDEF_(0x0026234BL)
//
// MessageId: ERROR_GRAPHICS_NO_MORE_ELEMENTS_IN_DATASET
//
// MessageText:
//
// Specified data set (e.g. mode set, frequency range set, descriptor
set, topology, etc.) does not contain any more elements.
//
#define ERROR_GRAPHICS_NO_MORE_ELEMENTS_IN_DATASET
_HRESULT_TYPEDEF_(0x0026234CL)
//
// MessageId:
ERROR_GRAPHICS_INVALID_VIDPN_TOPOLOGY_RECOMMENDATION_REASON
//
// MessageText:
//
// Specified VidPN topology recommendation reason is invalid.
//
#define ERROR_GRAPHICS_INVALID_VIDPN_TOPOLOGY_RECOMMENDATION_REASON
_HRESULT_TYPEDEF_(0xC026234DL)
//
// MessageId: ERROR_GRAPHICS_INVALID_PATH_CONTENT_TYPE
//
// MessageText:
//
// Specified VidPN present path content type is invalid.
//
#define ERROR_GRAPHICS_INVALID_PATH_CONTENT_TYPE
_HRESULT_TYPEDEF_(0xC026234EL)
//
// MessageId: ERROR_GRAPHICS_INVALID_COPYPROTECTION_TYPE
//
// MessageText:
//
// Specified VidPN present path copy protection type is invalid.
//
#define ERROR_GRAPHICS_INVALID_COPYPROTECTION_TYPE
_HRESULT_TYPEDEF_(0xC026234FL)
//
// MessageId: ERROR_GRAPHICS_UNASSIGNED_MODESET_ALREADY_EXISTS
//
// MessageText:
//
// No more than one unassigned mode set can exist at any given time for
a given VidPN source/target.
//
#define ERROR_GRAPHICS_UNASSIGNED_MODESET_ALREADY_EXISTS
_HRESULT_TYPEDEF_(0xC0262350L)
//
// MessageId:
ERROR_GRAPHICS_PATH_CONTENT_GEOMETRY_TRANSFORMATION_NOT_PINNED
//
// MessageText:
//
// Specified content transformation is not pinned on the specified
VidPN present path.
//
#define ERROR_GRAPHICS_PATH_CONTENT_GEOMETRY_TRANSFORMATION_NOT_PINNED
_HRESULT_TYPEDEF_(0x00262351L)
//
// MessageId: ERROR_GRAPHICS_INVALID_SCANLINE_ORDERING
//
// MessageText:
//
// Specified scanline ordering type is invalid.
//
#define ERROR_GRAPHICS_INVALID_SCANLINE_ORDERING
_HRESULT_TYPEDEF_(0xC0262352L)
//
// MessageId: ERROR_GRAPHICS_TOPOLOGY_CHANGES_NOT_ALLOWED
//
// MessageText:
//
// Topology changes are not allowed for the specified VidPN.
//
#define ERROR_GRAPHICS_TOPOLOGY_CHANGES_NOT_ALLOWED
_HRESULT_TYPEDEF_(0xC0262353L)
//
// MessageId: ERROR_GRAPHICS_NO_AVAILABLE_IMPORTANCE_ORDINALS
//
// MessageText:
//
// All available importance ordinals are already used in specified
topology.
//
#define ERROR_GRAPHICS_NO_AVAILABLE_IMPORTANCE_ORDINALS
_HRESULT_TYPEDEF_(0xC0262354L)
//
// MessageId: ERROR_GRAPHICS_INCOMPATIBLE_PRIVATE_FORMAT
//
// MessageText:
//
// Specified primary surface has a different private format attribute
than the current primary surface
//
#define ERROR_GRAPHICS_INCOMPATIBLE_PRIVATE_FORMAT
_HRESULT_TYPEDEF_(0xC0262355L)
//
// MessageId: ERROR_GRAPHICS_INVALID_MODE_PRUNING_ALGORITHM
//
// MessageText:
//
// Specified mode pruning algorithm is invalid
//
#define ERROR_GRAPHICS_INVALID_MODE_PRUNING_ALGORITHM
_HRESULT_TYPEDEF_(0xC0262356L)
//
// MessageId: ERROR_GRAPHICS_INVALID_MONITOR_CAPABILITY_ORIGIN
//
// MessageText:
//
// Specified monitor capability origin is invalid.
//
#define ERROR_GRAPHICS_INVALID_MONITOR_CAPABILITY_ORIGIN
_HRESULT_TYPEDEF_(0xC0262357L)
//
// MessageId: ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE_CONSTRAINT
//
// MessageText:
//
// Specified monitor frequency range constraint is invalid.
//
#define ERROR_GRAPHICS_INVALID_MONITOR_FREQUENCYRANGE_CONSTRAINT
_HRESULT_TYPEDEF_(0xC0262358L)
//
// MessageId: ERROR_GRAPHICS_MAX_NUM_PATHS_REACHED
//
// MessageText:
//
// Maximum supported number of present paths has been reached.
//
#define ERROR_GRAPHICS_MAX_NUM_PATHS_REACHED
_HRESULT_TYPEDEF_(0xC0262359L)
//
// MessageId: ERROR_GRAPHICS_CANCEL_VIDPN_TOPOLOGY_AUGMENTATION
//
// MessageText:
//
// Miniport requested that augmentation be cancelled for the specified
source of the specified VidPN's topology.
//
#define ERROR_GRAPHICS_CANCEL_VIDPN_TOPOLOGY_AUGMENTATION
_HRESULT_TYPEDEF_(0xC026235AL)
//
// MessageId: ERROR_GRAPHICS_INVALID_CLIENT_TYPE
//
// MessageText:
//
// Specified client type was not recognized.
//
#define ERROR_GRAPHICS_INVALID_CLIENT_TYPE
_HRESULT_TYPEDEF_(0xC026235BL)
//
// MessageId: ERROR_GRAPHICS_CLIENTVIDPN_NOT_SET
//
// MessageText:
//
// Client VidPN is not set on this adapter (e.g. no user mode initiated
mode changes took place on this adapter yet).
//
#define ERROR_GRAPHICS_CLIENTVIDPN_NOT_SET
_HRESULT_TYPEDEF_(0xC026235CL)
//
// Port specific status codes {0x2400..0x24ff}
//
//
// MessageId: ERROR_GRAPHICS_SPECIFIED_CHILD_ALREADY_CONNECTED
//
// MessageText:
//
// Specified display adapter child device already has an external
device connected to it.
//
#define ERROR_GRAPHICS_SPECIFIED_CHILD_ALREADY_CONNECTED
_HRESULT_TYPEDEF_(0xC0262400L)
//
// MessageId: ERROR_GRAPHICS_CHILD_DESCRIPTOR_NOT_SUPPORTED
//
// MessageText:
//
// Specified display adapter child device does not support descriptor
exposure.
//
#define ERROR_GRAPHICS_CHILD_DESCRIPTOR_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262401L)
//
// MessageId: ERROR_GRAPHICS_UNKNOWN_CHILD_STATUS
//
// MessageText:
//
// Child device presence was not reliably detected.
//
#define ERROR_GRAPHICS_UNKNOWN_CHILD_STATUS
_HRESULT_TYPEDEF_(0x4026242FL)
//
// MessageId: ERROR_GRAPHICS_NOT_A_LINKED_ADAPTER
//
// MessageText:
//
// The display adapter is not linked to any other adapters.
//
#define ERROR_GRAPHICS_NOT_A_LINKED_ADAPTER
_HRESULT_TYPEDEF_(0xC0262430L)
//
// MessageId: ERROR_GRAPHICS_LEADLINK_NOT_ENUMERATED
//
// MessageText:
//
// Lead adapter in a linked configuration was not enumerated yet.
//
#define ERROR_GRAPHICS_LEADLINK_NOT_ENUMERATED
_HRESULT_TYPEDEF_(0xC0262431L)
//
// MessageId: ERROR_GRAPHICS_CHAINLINKS_NOT_ENUMERATED
//
// MessageText:
//
// Some chain adapters in a linked configuration were not enumerated
yet.
//
#define ERROR_GRAPHICS_CHAINLINKS_NOT_ENUMERATED
_HRESULT_TYPEDEF_(0xC0262432L)
//
// MessageId: ERROR_GRAPHICS_ADAPTER_CHAIN_NOT_READY
//
// MessageText:
//
// The chain of linked adapters is not ready to start because of an
unknown failure.
//
#define ERROR_GRAPHICS_ADAPTER_CHAIN_NOT_READY
_HRESULT_TYPEDEF_(0xC0262433L)
//
// MessageId: ERROR_GRAPHICS_CHAINLINKS_NOT_STARTED
//
// MessageText:
//
// An attempt was made to start a lead link display adapter when the
chain links were not started yet.
//
#define ERROR_GRAPHICS_CHAINLINKS_NOT_STARTED
_HRESULT_TYPEDEF_(0xC0262434L)
//
// MessageId: ERROR_GRAPHICS_CHAINLINKS_NOT_POWERED_ON
//
// MessageText:
//
// An attempt was made to power up a lead link display adapter when the
chain links were powered down.
//
#define ERROR_GRAPHICS_CHAINLINKS_NOT_POWERED_ON
_HRESULT_TYPEDEF_(0xC0262435L)
//
// MessageId: ERROR_GRAPHICS_INCONSISTENT_DEVICE_LINK_STATE
//
// MessageText:
//
// The adapter link was found to be in an inconsistent state. Not all
adapters are in an expected PNP/Power state.
//
#define ERROR_GRAPHICS_INCONSISTENT_DEVICE_LINK_STATE
_HRESULT_TYPEDEF_(0xC0262436L)
//
// MessageId: ERROR_GRAPHICS_LEADLINK_START_DEFERRED
//
// MessageText:
//
// Starting the leadlink adapter has been deferred temporarily.
//
#define ERROR_GRAPHICS_LEADLINK_START_DEFERRED
_HRESULT_TYPEDEF_(0x40262437L)
//
// MessageId: ERROR_GRAPHICS_NOT_POST_DEVICE_DRIVER
//
// MessageText:
//
// The driver trying to start is not the same as the driver for the
POSTed display adapter.
//
#define ERROR_GRAPHICS_NOT_POST_DEVICE_DRIVER
_HRESULT_TYPEDEF_(0xC0262438L)
//
// MessageId: ERROR_GRAPHICS_POLLING_TOO_FREQUENTLY
//
// MessageText:
//
// The display adapter is being polled for children too frequently at
the same polling level.
//
#define ERROR_GRAPHICS_POLLING_TOO_FREQUENTLY
_HRESULT_TYPEDEF_(0x40262439L)
//
// MessageId: ERROR_GRAPHICS_START_DEFERRED
//
// MessageText:
//
// Starting the adapter has been deferred temporarily.
//
#define ERROR_GRAPHICS_START_DEFERRED
_HRESULT_TYPEDEF_(0x4026243AL)
//
// MessageId: ERROR_GRAPHICS_ADAPTER_ACCESS_NOT_EXCLUDED
//
// MessageText:
//
// An operation is being attempted that requires the display adapter to
be in a quiescent state.
//
#define ERROR_GRAPHICS_ADAPTER_ACCESS_NOT_EXCLUDED
_HRESULT_TYPEDEF_(0xC026243BL)
//
// OPM, UAB and PVP specific error codes {0x2500..0x257f}
//
//
// MessageId: ERROR_GRAPHICS_OPM_NOT_SUPPORTED
//
// MessageText:
//
// The driver does not support OPM.
//
#define ERROR_GRAPHICS_OPM_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262500L)
//
// MessageId: ERROR_GRAPHICS_COPP_NOT_SUPPORTED
//
// MessageText:
//
// The driver does not support COPP.
//
#define ERROR_GRAPHICS_COPP_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262501L)
//
// MessageId: ERROR_GRAPHICS_UAB_NOT_SUPPORTED
//
// MessageText:
//
// The driver does not support UAB.
//
#define ERROR_GRAPHICS_UAB_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262502L)
//
// MessageId: ERROR_GRAPHICS_OPM_INVALID_ENCRYPTED_PARAMETERS
//
// MessageText:
//
// The specified encrypted parameters are invalid.
//
#define ERROR_GRAPHICS_OPM_INVALID_ENCRYPTED_PARAMETERS
_HRESULT_TYPEDEF_(0xC0262503L)
//
// MessageId: ERROR_GRAPHICS_OPM_NO_VIDEO_OUTPUTS_EXIST
//
// MessageText:
//
// The GDI display device passed to this function does not have any
active video outputs.
//
#define ERROR_GRAPHICS_OPM_NO_VIDEO_OUTPUTS_EXIST
_HRESULT_TYPEDEF_(0xC0262505L)
//
// MessageId: ERROR_GRAPHICS_OPM_INTERNAL_ERROR
//
// MessageText:
//
// An internal error caused this operation to fail.
//
#define ERROR_GRAPHICS_OPM_INTERNAL_ERROR _HRESULT_TYPEDEF_(0xC026250BL)
//
// MessageId: ERROR_GRAPHICS_OPM_INVALID_HANDLE
//
// MessageText:
//
// The function failed because the caller passed in an invalid OPM user
mode handle.
//
#define ERROR_GRAPHICS_OPM_INVALID_HANDLE _HRESULT_TYPEDEF_(0xC026250CL)
//
// MessageId: ERROR_GRAPHICS_PVP_INVALID_CERTIFICATE_LENGTH
//
// MessageText:
//
// A certificate could not be returned because the certificate buffer
passed to the function was too small.
//
#define ERROR_GRAPHICS_PVP_INVALID_CERTIFICATE_LENGTH
_HRESULT_TYPEDEF_(0xC026250EL)
//
// MessageId: ERROR_GRAPHICS_OPM_SPANNING_MODE_ENABLED
//
// MessageText:
//
// A video output could not be created because the frame buffer is in
spanning mode.
//
#define ERROR_GRAPHICS_OPM_SPANNING_MODE_ENABLED
_HRESULT_TYPEDEF_(0xC026250FL)
//
// MessageId: ERROR_GRAPHICS_OPM_THEATER_MODE_ENABLED
//
// MessageText:
//
// A video output could not be created because the frame buffer is in
theater mode.
//
#define ERROR_GRAPHICS_OPM_THEATER_MODE_ENABLED
_HRESULT_TYPEDEF_(0xC0262510L)
//
// MessageId: ERROR_GRAPHICS_PVP_HFS_FAILED
//
// MessageText:
//
// The function failed because the display adapter's Hardware
Functionality Scan failed to validate the graphics hardware.
//
#define ERROR_GRAPHICS_PVP_HFS_FAILED
_HRESULT_TYPEDEF_(0xC0262511L)
//
// MessageId: ERROR_GRAPHICS_OPM_INVALID_SRM
//
// MessageText:
//
// The HDCP System Renewability Message passed to this function did not
comply with section 5 of the HDCP 1.1 specification.
//
#define ERROR_GRAPHICS_OPM_INVALID_SRM
_HRESULT_TYPEDEF_(0xC0262512L)
//
// MessageId: ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_HDCP
//
// MessageText:
//
// The video output cannot enable the High-bandwidth Digital Content
Protection (HDCP) System because it does not support HDCP.
//
#define ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_HDCP
_HRESULT_TYPEDEF_(0xC0262513L)
//
// MessageId: ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_ACP
//
// MessageText:
//
// The video output cannot enable Analogue Copy Protection (ACP)
because it does not support ACP.
//
#define ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_ACP
_HRESULT_TYPEDEF_(0xC0262514L)
//
// MessageId: ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_CGMSA
//
// MessageText:
//
//
The video output cannot enable the Content Generation Management System
Analogue (CGMS-A) protection technology because it does not support
CGMS-A.
//
#define ERROR_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_CGMSA
_HRESULT_TYPEDEF_(0xC0262515L)
//
// MessageId: ERROR_GRAPHICS_OPM_HDCP_SRM_NEVER_SET
//
// MessageText:
//
//
The IOPMVideoOutput::GetInformation method cannot return the version of
the SRM being used because the application never successfully passed an
SRM to the video output.
//
#define ERROR_GRAPHICS_OPM_HDCP_SRM_NEVER_SET
_HRESULT_TYPEDEF_(0xC0262516L)
//
// MessageId: ERROR_GRAPHICS_OPM_RESOLUTION_TOO_HIGH
//
// MessageText:
//
//
The IOPMVideoOutput::Configure method cannot enable the specified
output protection technology because the output's screen resolution is
too high.
//
#define ERROR_GRAPHICS_OPM_RESOLUTION_TOO_HIGH
_HRESULT_TYPEDEF_(0xC0262517L)
//
// MessageId: ERROR_GRAPHICS_OPM_ALL_HDCP_HARDWARE_ALREADY_IN_USE
//
// MessageText:
//
//
The IOPMVideoOutput::Configure method cannot enable HDCP because the
display adapter's HDCP hardware is already being used by other physical
outputs.
//
#define ERROR_GRAPHICS_OPM_ALL_HDCP_HARDWARE_ALREADY_IN_USE
_HRESULT_TYPEDEF_(0xC0262518L)
//
// MessageId: ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_NO_LONGER_EXISTS
//
// MessageText:
//
//
The operating system asynchronously destroyed this OPM video output
because the operating system's state changed. This error typically
occurs because the monitor PDO associated with this video output was
removed, the monitor PDO associated with this video output was stopped,
the video output's session became a non-console session or the video
output's desktop became an inactive desktop.
//
#define ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_NO_LONGER_EXISTS
_HRESULT_TYPEDEF_(0xC026251AL)
//
// MessageId: ERROR_GRAPHICS_OPM_SESSION_TYPE_CHANGE_IN_PROGRESS
//
// MessageText:
//
//
The method failed because the session is changing its type. No
IOPMVideoOutput methods can be called when a session is changing its
type. There are currently three types of sessions: console,
disconnected and remote.
//
#define ERROR_GRAPHICS_OPM_SESSION_TYPE_CHANGE_IN_PROGRESS
_HRESULT_TYPEDEF_(0xC026251BL)
//
// MessageId:
ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_DOES_NOT_HAVE_COPP_SEMANTICS
//
// MessageText:
//
//
Either the IOPMVideoOutput::COPPCompatibleGetInformation,
IOPMVideoOutput::GetInformation, or IOPMVideoOutput::Configure method
failed. This error is returned when the caller tries to use a COPP
specific command while the video output has OPM semantics only.
//
#define ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_DOES_NOT_HAVE_COPP_SEMANTICS
_HRESULT_TYPEDEF_(0xC026251CL)
//
// MessageId: ERROR_GRAPHICS_OPM_INVALID_INFORMATION_REQUEST
//
// MessageText:
//
//
The IOPMVideoOutput::GetInformation and
IOPMVideoOutput::COPPCompatibleGetInformation methods return this error
if the passed in sequence number is not the expected sequence number or
the passed in OMAC value is invalid.
//
#define ERROR_GRAPHICS_OPM_INVALID_INFORMATION_REQUEST
_HRESULT_TYPEDEF_(0xC026251DL)
//
// MessageId: ERROR_GRAPHICS_OPM_DRIVER_INTERNAL_ERROR
//
// MessageText:
//
// The method failed because an unexpected error occurred inside of a
display driver.
//
#define ERROR_GRAPHICS_OPM_DRIVER_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0xC026251EL)
//
// MessageId:
ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_DOES_NOT_HAVE_OPM_SEMANTICS
//
// MessageText:
//
//
Either the IOPMVideoOutput::COPPCompatibleGetInformation,
IOPMVideoOutput::GetInformation, or IOPMVideoOutput::Configure method
failed. This error is returned when the caller tries to use an OPM
specific command while the video output has COPP semantics only.
//
#define ERROR_GRAPHICS_OPM_VIDEO_OUTPUT_DOES_NOT_HAVE_OPM_SEMANTICS
_HRESULT_TYPEDEF_(0xC026251FL)
//
// MessageId: ERROR_GRAPHICS_OPM_SIGNALING_NOT_SUPPORTED
//
// MessageText:
//
//
The IOPMVideoOutput::COPPCompatibleGetInformation or
IOPMVideoOutput::Configure method failed because the display driver
does not support the OPM_GET_ACP_AND_CGMSA_SIGNALING and
OPM_SET_ACP_AND_CGMSA_SIGNALING GUIDs.
//
#define ERROR_GRAPHICS_OPM_SIGNALING_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262520L)
//
// MessageId: ERROR_GRAPHICS_OPM_INVALID_CONFIGURATION_REQUEST
//
// MessageText:
//
//
The IOPMVideoOutput::Configure function returns this error code if the
passed in sequence number is not the expected sequence number or the
passed in OMAC value is invalid.
//
#define ERROR_GRAPHICS_OPM_INVALID_CONFIGURATION_REQUEST
_HRESULT_TYPEDEF_(0xC0262521L)
//
// Monitor Configuration API error codes {0x2580..0x25DF}
//
//
// MessageId: ERROR_GRAPHICS_I2C_NOT_SUPPORTED
//
// MessageText:
//
// The monitor connected to the specified video output does not have an
I2C bus.
//
#define ERROR_GRAPHICS_I2C_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262580L)
//
// MessageId: ERROR_GRAPHICS_I2C_DEVICE_DOES_NOT_EXIST
//
// MessageText:
//
// No device on the I2C bus has the specified address.
//
#define ERROR_GRAPHICS_I2C_DEVICE_DOES_NOT_EXIST
_HRESULT_TYPEDEF_(0xC0262581L)
//
// MessageId: ERROR_GRAPHICS_I2C_ERROR_TRANSMITTING_DATA
//
// MessageText:
//
// An error occurred while transmitting data to the device on the I2C
bus.
//
#define ERROR_GRAPHICS_I2C_ERROR_TRANSMITTING_DATA
_HRESULT_TYPEDEF_(0xC0262582L)
//
// MessageId: ERROR_GRAPHICS_I2C_ERROR_RECEIVING_DATA
//
// MessageText:
//
// An error occurred while receiving data from the device on the I2C
bus.
//
#define ERROR_GRAPHICS_I2C_ERROR_RECEIVING_DATA
_HRESULT_TYPEDEF_(0xC0262583L)
//
// MessageId: ERROR_GRAPHICS_DDCCI_VCP_NOT_SUPPORTED
//
// MessageText:
//
// The monitor does not support the specified VCP code.
//
#define ERROR_GRAPHICS_DDCCI_VCP_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC0262584L)
//
// MessageId: ERROR_GRAPHICS_DDCCI_INVALID_DATA
//
// MessageText:
//
// The data received from the monitor is invalid.
//
#define ERROR_GRAPHICS_DDCCI_INVALID_DATA
_HRESULT_TYPEDEF_(0xC0262585L)
//
// MessageId:
ERROR_GRAPHICS_DDCCI_MONITOR_RETURNED_INVALID_TIMING_STATUS_BYTE
//
// MessageText:
//
//
The function failed because a monitor returned an invalid Timing Status
byte when the operating system used the DDC/CI Get Timing Report
&
Timing Message command to get a timing report from a monitor.
//
#define
ERROR_GRAPHICS_DDCCI_MONITOR_RETURNED_INVALID_TIMING_STATUS_BYTE
_HRESULT_TYPEDEF_(0xC0262586L)
//
// MessageId: ERROR_GRAPHICS_MCA_INVALID_CAPABILITIES_STRING
//
// MessageText:
//
//
The monitor returned a DDC/CI capabilities string which did not comply
with the ACCESS.bus 3.0, DDC/CI 1.1, or MCCS 2 Revision 1 specification.
//
#define ERROR_GRAPHICS_MCA_INVALID_CAPABILITIES_STRING
_HRESULT_TYPEDEF_(0xC0262587L)
//
// MessageId: ERROR_GRAPHICS_MCA_INTERNAL_ERROR
//
// MessageText:
//
// An internal Monitor Configuration API error occured.
//
#define ERROR_GRAPHICS_MCA_INTERNAL_ERROR _HRESULT_TYPEDEF_(0xC0262588L)
//
// MessageId: ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_COMMAND
//
// MessageText:
//
// An operation failed because a DDC/CI message had an invalid value in
its command field.
//
#define ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_COMMAND
_HRESULT_TYPEDEF_(0xC0262589L)
//
// MessageId: ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_LENGTH
//
// MessageText:
//
// An error occurred because the field length of a DDC/CI message
contained an invalid value.
//
#define ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_LENGTH
_HRESULT_TYPEDEF_(0xC026258AL)
//
// MessageId: ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_CHECKSUM
//
// MessageText:
//
//
An error occurred because the checksum field in a DDC/CI message did
not match the message's computed checksum value. This error implies
that the data was corrupted while it was being transmitted from a
monitor to a computer.
//
#define ERROR_GRAPHICS_DDCCI_INVALID_MESSAGE_CHECKSUM
_HRESULT_TYPEDEF_(0xC026258BL)
//
// MessageId: ERROR_GRAPHICS_INVALID_PHYSICAL_MONITOR_HANDLE
//
// MessageText:
//
// This function failed because an invalid monitor handle was passed to
it.
//
#define ERROR_GRAPHICS_INVALID_PHYSICAL_MONITOR_HANDLE
_HRESULT_TYPEDEF_(0xC026258CL)
//
// MessageId: ERROR_GRAPHICS_MONITOR_NO_LONGER_EXISTS
//
// MessageText:
//
//
The operating system asynchronously destroyed the monitor which
corresponds to this handle because the operating system's state
changed. This error typically occurs because the monitor PDO associated
with this handle was removed, the monitor PDO associated with this
handle was stopped, or a display mode change occurred. A display mode
change occurs when windows sends a WM_DISPLAYCHANGE windows message to
applications.
//
#define ERROR_GRAPHICS_MONITOR_NO_LONGER_EXISTS
_HRESULT_TYPEDEF_(0xC026258DL)
//
// MessageId:
ERROR_GRAPHICS_DDCCI_CURRENT_CURRENT_VALUE_GREATER_THAN_MAXIMUM_VALUE
//
// MessageText:
//
//
A continuous VCP code's current value is greater than its maximum
value. This error code indicates that a monitor returned an invalid
value.
//
#define
ERROR_GRAPHICS_DDCCI_CURRENT_CURRENT_VALUE_GREATER_THAN_MAXIMUM_VALUE
_HRESULT_TYPEDEF_(0xC02625D8L)
//
// MessageId: ERROR_GRAPHICS_MCA_INVALID_VCP_VERSION
//
// MessageText:
//
// The monitor's VCP Version (0xDF) VCP code returned an invalid
version value.
//
#define ERROR_GRAPHICS_MCA_INVALID_VCP_VERSION
_HRESULT_TYPEDEF_(0xC02625D9L)
//
// MessageId: ERROR_GRAPHICS_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION
//
// MessageText:
//
// The monitor does not comply with the MCCS specification it claims to
support.
//
#define ERROR_GRAPHICS_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION
_HRESULT_TYPEDEF_(0xC02625DAL)
//
// MessageId: ERROR_GRAPHICS_MCA_MCCS_VERSION_MISMATCH
//
// MessageText:
//
//
The MCCS version in a monitor's mccs_ver capability does not match the
MCCS version the monitor reports when the VCP Version (0xDF) VCP code
is used.
//
#define ERROR_GRAPHICS_MCA_MCCS_VERSION_MISMATCH
_HRESULT_TYPEDEF_(0xC02625DBL)
//
// MessageId: ERROR_GRAPHICS_MCA_UNSUPPORTED_MCCS_VERSION
//
// MessageText:
//
//
The Monitor Configuration API only works with monitors which support
the MCCS 1.0 specification, MCCS 2.0 specification or the MCCS 2.0
Revision 1 specification.
//
#define ERROR_GRAPHICS_MCA_UNSUPPORTED_MCCS_VERSION
_HRESULT_TYPEDEF_(0xC02625DCL)
//
// MessageId: ERROR_GRAPHICS_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED
//
// MessageText:
//
//
The monitor returned an invalid monitor technology type. CRT, Plasma
and LCD (TFT) are examples of monitor technology types. This error
implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1
specification.
//
#define ERROR_GRAPHICS_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED
_HRESULT_TYPEDEF_(0xC02625DEL)
//
// MessageId: ERROR_GRAPHICS_MCA_UNSUPPORTED_COLOR_TEMPERATURE
//
// MessageText:
//
//
SetMonitorColorTemperature()'s caller passed a color temperature to it
which the current monitor did not support. This error implies that the
monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.
//
#define ERROR_GRAPHICS_MCA_UNSUPPORTED_COLOR_TEMPERATURE
_HRESULT_TYPEDEF_(0xC02625DFL)
//
// OPM, UAB, PVP and DDC/CI shared error codes {0x25E0..0x25ff}
//
//
// MessageId: ERROR_GRAPHICS_ONLY_CONSOLE_SESSION_SUPPORTED
//
// MessageText:
//
//
This function can only be used if a program is running in the local
console session. It cannot be used if the program is running on a
remote desktop session or on a terminal server session.
//
#define ERROR_GRAPHICS_ONLY_CONSOLE_SESSION_SUPPORTED
_HRESULT_TYPEDEF_(0xC02625E0L)
//
// MessageId: ERROR_GRAPHICS_NO_DISPLAY_DEVICE_CORRESPONDS_TO_NAME
//
// MessageText:
//
// This function cannot find an actual GDI display device which
corresponds to the specified GDI display device name.
//
#define ERROR_GRAPHICS_NO_DISPLAY_DEVICE_CORRESPONDS_TO_NAME
_HRESULT_TYPEDEF_(0xC02625E1L)
//
// MessageId: ERROR_GRAPHICS_DISPLAY_DEVICE_NOT_ATTACHED_TO_DESKTOP
//
// MessageText:
//
// The function failed because the specified GDI display device was not
attached to the Windows desktop.
//
#define ERROR_GRAPHICS_DISPLAY_DEVICE_NOT_ATTACHED_TO_DESKTOP
_HRESULT_TYPEDEF_(0xC02625E2L)
//
// MessageId: ERROR_GRAPHICS_MIRRORING_DEVICES_NOT_SUPPORTED
//
// MessageText:
//
//
This function does not support GDI mirroring display devices because
GDI mirroring display devices do not have any physical monitors
associated with them.
//
#define ERROR_GRAPHICS_MIRRORING_DEVICES_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0xC02625E3L)
//
// MessageId: ERROR_GRAPHICS_INVALID_POINTER
//
// MessageText:
//
//
The function failed because an invalid pointer parameter was passed to
it. A pointer parameter is invalid if it is NULL, points to an invalid
address, points to a kernel mode address, or is not correctly aligned.
//
#define ERROR_GRAPHICS_INVALID_POINTER
_HRESULT_TYPEDEF_(0xC02625E4L)
//
// MessageId: ERROR_GRAPHICS_NO_MONITORS_CORRESPOND_TO_DISPLAY_DEVICE
//
// MessageText:
//
// The function failed because the specified GDI device did not have
any monitors associated with it.
//
#define ERROR_GRAPHICS_NO_MONITORS_CORRESPOND_TO_DISPLAY_DEVICE
_HRESULT_TYPEDEF_(0xC02625E5L)
//
// MessageId: ERROR_GRAPHICS_PARAMETER_ARRAY_TOO_SMALL
//
// MessageText:
//
// An array passed to the function cannot hold all of the data that the
function must copy into the array.
//
#define ERROR_GRAPHICS_PARAMETER_ARRAY_TOO_SMALL
_HRESULT_TYPEDEF_(0xC02625E6L)
//
// MessageId: ERROR_GRAPHICS_INTERNAL_ERROR
//
// MessageText:
//
// An internal error caused an operation to fail.
//
#define ERROR_GRAPHICS_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0xC02625E7L)
//
// MessageId: ERROR_GRAPHICS_SESSION_TYPE_CHANGE_IN_PROGRESS
//
// MessageText:
//
//
The function failed because the current session is changing its type.
This function cannot be called when the current session is changing its
type. There are currently three types of sessions: console,
disconnected and remote.
//
#define ERROR_GRAPHICS_SESSION_TYPE_CHANGE_IN_PROGRESS
_HRESULT_TYPEDEF_(0xC02605E8L)
//
// ===============================
// TPM Services and TPM Software Error Messages
// ===============================
//
// The TPM services and TPM software facilities are used by the various
// TPM software components. There are two facilities because the
services
// errors are within the TCG-defined error space and the software errors
// are not.
//
// The following are the subranges within the TPM Services facility.
// The TPM hardware errors are defined in the document
// TPM Main Specification 1.2 Part 2 TPM Structures.
// The TBS errors are slotted into the TCG error namespace at the TBS
layer.
//
// 0x0000 - 0x08ff TPM hardware
errors
// 0x4000 - 0x40ff TPM Base
Services errors (tbssvc.dll)
//
// The following are the subranges within the TPM Software facility.
The TBS
// has two classes of errors - those that can be returned (the public
errors,
// defined in the TBS spec), which are in the TPM services
facility, and
// those that are internal or implementation specific, which are here
in the
// TPM software facility.
//
// 0x0000 - 0x00ff TPM device
driver errors (tpm.sys)
// 0x0100 - 0x01ff TPM API
errors (tpmapi.lib)
// 0x0200 - 0x02ff TBS internal
errors (tbssvc.dll)
// 0x0300 - 0x03ff TPM Physical
Presence errors
//
//
// TPM hardware error codes {0x0000..0x08ff}
// This space is further subdivided into hardware errors,
vendor-specific
// errors, and non-fatal errors.
//
//
// TPM hardware errors {0x0000..0x003ff}
//
//
// MessageId: TPM_E_ERROR_MASK
//
// MessageText:
//
// This is an error mask to convert TPM hardware errors to win errors.
//
#define
TPM_E_ERROR_MASK
_HRESULT_TYPEDEF_(0x80280000L)
//
// MessageId: TPM_E_AUTHFAIL
//
// MessageText:
//
// Authentication failed.
//
#define
TPM_E_AUTHFAIL
_HRESULT_TYPEDEF_(0x80280001L)
//
// MessageId: TPM_E_BADINDEX
//
// MessageText:
//
// The index to a PCR, DIR or other register is incorrect.
//
#define
TPM_E_BADINDEX
_HRESULT_TYPEDEF_(0x80280002L)
//
// MessageId: TPM_E_BAD_PARAMETER
//
// MessageText:
//
// One or more parameter is bad.
//
#define
TPM_E_BAD_PARAMETER
_HRESULT_TYPEDEF_(0x80280003L)
//
// MessageId: TPM_E_AUDITFAILURE
//
// MessageText:
//
// An operation completed successfully but the auditing of that
operation failed.
//
#define
TPM_E_AUDITFAILURE
_HRESULT_TYPEDEF_(0x80280004L)
//
// MessageId: TPM_E_CLEAR_DISABLED
//
// MessageText:
//
// The clear disable flag is set and all clear operations now require
physical access.
//
#define
TPM_E_CLEAR_DISABLED
_HRESULT_TYPEDEF_(0x80280005L)
//
// MessageId: TPM_E_DEACTIVATED
//
// MessageText:
//
// Activate the Trusted Platform Module (TPM).
//
#define
TPM_E_DEACTIVATED
_HRESULT_TYPEDEF_(0x80280006L)
//
// MessageId: TPM_E_DISABLED
//
// MessageText:
//
// Enable the Trusted Platform Module (TPM).
//
#define
TPM_E_DISABLED
_HRESULT_TYPEDEF_(0x80280007L)
//
// MessageId: TPM_E_DISABLED_CMD
//
// MessageText:
//
// The target command has been disabled.
//
#define
TPM_E_DISABLED_CMD
_HRESULT_TYPEDEF_(0x80280008L)
//
// MessageId: TPM_E_FAIL
//
// MessageText:
//
// The operation failed.
//
#define
TPM_E_FAIL
_HRESULT_TYPEDEF_(0x80280009L)
//
// MessageId: TPM_E_BAD_ORDINAL
//
// MessageText:
//
// The ordinal was unknown or inconsistent.
//
#define
TPM_E_BAD_ORDINAL
_HRESULT_TYPEDEF_(0x8028000AL)
//
// MessageId: TPM_E_INSTALL_DISABLED
//
// MessageText:
//
// The ability to install an owner is disabled.
//
#define
TPM_E_INSTALL_DISABLED
_HRESULT_TYPEDEF_(0x8028000BL)
//
// MessageId: TPM_E_INVALID_KEYHANDLE
//
// MessageText:
//
// The key handle cannot be interpreted.
//
#define
TPM_E_INVALID_KEYHANDLE
_HRESULT_TYPEDEF_(0x8028000CL)
//
// MessageId: TPM_E_KEYNOTFOUND
//
// MessageText:
//
// The key handle points to an invalid key.
//
#define
TPM_E_KEYNOTFOUND
_HRESULT_TYPEDEF_(0x8028000DL)
//
// MessageId: TPM_E_INAPPROPRIATE_ENC
//
// MessageText:
//
// Unacceptable encryption scheme.
//
#define
TPM_E_INAPPROPRIATE_ENC
_HRESULT_TYPEDEF_(0x8028000EL)
//
// MessageId: TPM_E_MIGRATEFAIL
//
// MessageText:
//
// Migration authorization failed.
//
#define
TPM_E_MIGRATEFAIL
_HRESULT_TYPEDEF_(0x8028000FL)
//
// MessageId: TPM_E_INVALID_PCR_INFO
//
// MessageText:
//
// PCR information could not be interpreted.
//
#define
TPM_E_INVALID_PCR_INFO
_HRESULT_TYPEDEF_(0x80280010L)
//
// MessageId: TPM_E_NOSPACE
//
// MessageText:
//
// No room to load key.
//
#define
TPM_E_NOSPACE
_HRESULT_TYPEDEF_(0x80280011L)
//
// MessageId: TPM_E_NOSRK
//
// MessageText:
//
// There is no Storage Root Key (SRK) set.
//
#define
TPM_E_NOSRK
_HRESULT_TYPEDEF_(0x80280012L)
//
// MessageId: TPM_E_NOTSEALED_BLOB
//
// MessageText:
//
// An encrypted blob is invalid or was not created by this TPM.
//
#define
TPM_E_NOTSEALED_BLOB
_HRESULT_TYPEDEF_(0x80280013L)
//
// MessageId: TPM_E_OWNER_SET
//
// MessageText:
//
// The Trusted Platform Module (TPM) already has an owner.
//
#define
TPM_E_OWNER_SET
_HRESULT_TYPEDEF_(0x80280014L)
//
// MessageId: TPM_E_RESOURCES
//
// MessageText:
//
// The TPM has insufficient internal resources to perform the requested
action.
//
#define
TPM_E_RESOURCES
_HRESULT_TYPEDEF_(0x80280015L)
//
// MessageId: TPM_E_SHORTRANDOM
//
// MessageText:
//
// A random string was too short.
//
#define
TPM_E_SHORTRANDOM
_HRESULT_TYPEDEF_(0x80280016L)
//
// MessageId: TPM_E_SIZE
//
// MessageText:
//
// The TPM does not have the space to perform the operation.
//
#define
TPM_E_SIZE
_HRESULT_TYPEDEF_(0x80280017L)
//
// MessageId: TPM_E_WRONGPCRVAL
//
// MessageText:
//
// The named PCR value does not match the current PCR value.
//
#define
TPM_E_WRONGPCRVAL
_HRESULT_TYPEDEF_(0x80280018L)
//
// MessageId: TPM_E_BAD_PARAM_SIZE
//
// MessageText:
//
// The paramSize argument to the command has the incorrect value .
//
#define
TPM_E_BAD_PARAM_SIZE
_HRESULT_TYPEDEF_(0x80280019L)
//
// MessageId: TPM_E_SHA_THREAD
//
// MessageText:
//
// There is no existing SHA-1 thread.
//
#define
TPM_E_SHA_THREAD
_HRESULT_TYPEDEF_(0x8028001AL)
//
// MessageId: TPM_E_SHA_ERROR
//
// MessageText:
//
// The calculation is unable to proceed because the existing SHA-1
thread has already encountered an error.
//
#define
TPM_E_SHA_ERROR
_HRESULT_TYPEDEF_(0x8028001BL)
//
// MessageId: TPM_E_FAILEDSELFTEST
//
// MessageText:
//
//
The TPM hardware device reported a failure during its internal self
test. Try restarting the computer to resolve the problem. If the
problem continues, you might need to replace your TPM hardware or
motherboard.
//
#define
TPM_E_FAILEDSELFTEST
_HRESULT_TYPEDEF_(0x8028001CL)
//
// MessageId: TPM_E_AUTH2FAIL
//
// MessageText:
//
// The authorization for the second key in a 2 key function failed
authorization.
//
#define
TPM_E_AUTH2FAIL
_HRESULT_TYPEDEF_(0x8028001DL)
//
// MessageId: TPM_E_BADTAG
//
// MessageText:
//
// The tag value sent to for a command is invalid.
//
#define
TPM_E_BADTAG
_HRESULT_TYPEDEF_(0x8028001EL)
//
// MessageId: TPM_E_IOERROR
//
// MessageText:
//
// An IO error occurred transmitting information to the TPM.
//
#define
TPM_E_IOERROR
_HRESULT_TYPEDEF_(0x8028001FL)
//
// MessageId: TPM_E_ENCRYPT_ERROR
//
// MessageText:
//
// The encryption process had a problem.
//
#define
TPM_E_ENCRYPT_ERROR
_HRESULT_TYPEDEF_(0x80280020L)
//
// MessageId: TPM_E_DECRYPT_ERROR
//
// MessageText:
//
// The decryption process did not complete.
//
#define
TPM_E_DECRYPT_ERROR
_HRESULT_TYPEDEF_(0x80280021L)
//
// MessageId: TPM_E_INVALID_AUTHHANDLE
//
// MessageText:
//
// An invalid handle was used.
//
#define
TPM_E_INVALID_AUTHHANDLE
_HRESULT_TYPEDEF_(0x80280022L)
//
// MessageId: TPM_E_NO_ENDORSEMENT
//
// MessageText:
//
// The TPM does not have an Endorsement Key (EK) installed.
//
#define
TPM_E_NO_ENDORSEMENT
_HRESULT_TYPEDEF_(0x80280023L)
//
// MessageId: TPM_E_INVALID_KEYUSAGE
//
// MessageText:
//
// The usage of a key is not allowed.
//
#define
TPM_E_INVALID_KEYUSAGE
_HRESULT_TYPEDEF_(0x80280024L)
//
// MessageId: TPM_E_WRONG_ENTITYTYPE
//
// MessageText:
//
// The submitted entity type is not allowed.
//
#define
TPM_E_WRONG_ENTITYTYPE
_HRESULT_TYPEDEF_(0x80280025L)
//
// MessageId: TPM_E_INVALID_POSTINIT
//
// MessageText:
//
// The command was received in the wrong sequence relative to TPM_Init
and a subsequent TPM_Startup.
//
#define
TPM_E_INVALID_POSTINIT
_HRESULT_TYPEDEF_(0x80280026L)
//
// MessageId: TPM_E_INAPPROPRIATE_SIG
//
// MessageText:
//
// Signed data cannot include additional DER information.
//
#define
TPM_E_INAPPROPRIATE_SIG
_HRESULT_TYPEDEF_(0x80280027L)
//
// MessageId: TPM_E_BAD_KEY_PROPERTY
//
// MessageText:
//
// The key properties in TPM_KEY_PARMs are not supported by this TPM.
//
#define
TPM_E_BAD_KEY_PROPERTY
_HRESULT_TYPEDEF_(0x80280028L)
//
// MessageId: TPM_E_BAD_MIGRATION
//
// MessageText:
//
// The migration properties of this key are incorrect.
//
#define
TPM_E_BAD_MIGRATION
_HRESULT_TYPEDEF_(0x80280029L)
//
// MessageId: TPM_E_BAD_SCHEME
//
// MessageText:
//
// The signature or encryption scheme for this key is incorrect or not
permitted in this situation.
//
#define
TPM_E_BAD_SCHEME
_HRESULT_TYPEDEF_(0x8028002AL)
//
// MessageId: TPM_E_BAD_DATASIZE
//
// MessageText:
//
// The size of the data (or blob) parameter is bad or inconsistent with
the referenced key.
//
#define
TPM_E_BAD_DATASIZE
_HRESULT_TYPEDEF_(0x8028002BL)
//
// MessageId: TPM_E_BAD_MODE
//
// MessageText:
//
//
A mode parameter is bad, such as capArea or subCapArea for
TPM_GetCapability, phsicalPresence parameter for TPM_PhysicalPresence,
or migrationType for TPM_CreateMigrationBlob.
//
#define
TPM_E_BAD_MODE
_HRESULT_TYPEDEF_(0x8028002CL)
//
// MessageId: TPM_E_BAD_PRESENCE
//
// MessageText:
//
// Either the physicalPresence or physicalPresenceLock bits have the
wrong value.
//
#define
TPM_E_BAD_PRESENCE
_HRESULT_TYPEDEF_(0x8028002DL)
//
// MessageId: TPM_E_BAD_VERSION
//
// MessageText:
//
// The TPM cannot perform this version of the capability.
//
#define
TPM_E_BAD_VERSION
_HRESULT_TYPEDEF_(0x8028002EL)
//
// MessageId: TPM_E_NO_WRAP_TRANSPORT
//
// MessageText:
//
// The TPM does not allow for wrapped transport sessions.
//
#define
TPM_E_NO_WRAP_TRANSPORT
_HRESULT_TYPEDEF_(0x8028002FL)
//
// MessageId: TPM_E_AUDITFAIL_UNSUCCESSFUL
//
// MessageText:
//
// TPM audit construction failed and the underlying command was
returning a failure code also.
//
#define
TPM_E_AUDITFAIL_UNSUCCESSFUL
_HRESULT_TYPEDEF_(0x80280030L)
//
// MessageId: TPM_E_AUDITFAIL_SUCCESSFUL
//
// MessageText:
//
// TPM audit construction failed and the underlying command was
returning success.
//
#define
TPM_E_AUDITFAIL_SUCCESSFUL
_HRESULT_TYPEDEF_(0x80280031L)
//
// MessageId: TPM_E_NOTRESETABLE
//
// MessageText:
//
// Attempt to reset a PCR register that does not have the resettable
attribute.
//
#define
TPM_E_NOTRESETABLE
_HRESULT_TYPEDEF_(0x80280032L)
//
// MessageId: TPM_E_NOTLOCAL
//
// MessageText:
//
// Attempt to reset a PCR register that requires locality and locality
modifier not part of command transport.
//
#define
TPM_E_NOTLOCAL
_HRESULT_TYPEDEF_(0x80280033L)
//
// MessageId: TPM_E_BAD_TYPE
//
// MessageText:
//
// Make identity blob not properly typed.
//
#define
TPM_E_BAD_TYPE
_HRESULT_TYPEDEF_(0x80280034L)
//
// MessageId: TPM_E_INVALID_RESOURCE
//
// MessageText:
//
// When saving context identified resource type does not match actual
resource.
//
#define
TPM_E_INVALID_RESOURCE
_HRESULT_TYPEDEF_(0x80280035L)
//
// MessageId: TPM_E_NOTFIPS
//
// MessageText:
//
// The TPM is attempting to execute a command only available when in
FIPS mode.
//
#define
TPM_E_NOTFIPS
_HRESULT_TYPEDEF_(0x80280036L)
//
// MessageId: TPM_E_INVALID_FAMILY
//
// MessageText:
//
// The command is attempting to use an invalid family ID.
//
#define
TPM_E_INVALID_FAMILY
_HRESULT_TYPEDEF_(0x80280037L)
//
// MessageId: TPM_E_NO_NV_PERMISSION
//
// MessageText:
//
// The permission to manipulate the NV storage is not available.
//
#define
TPM_E_NO_NV_PERMISSION
_HRESULT_TYPEDEF_(0x80280038L)
//
// MessageId: TPM_E_REQUIRES_SIGN
//
// MessageText:
//
// The operation requires a signed command.
//
#define
TPM_E_REQUIRES_SIGN
_HRESULT_TYPEDEF_(0x80280039L)
//
// MessageId: TPM_E_KEY_NOTSUPPORTED
//
// MessageText:
//
// Wrong operation to load an NV key.
//
#define
TPM_E_KEY_NOTSUPPORTED
_HRESULT_TYPEDEF_(0x8028003AL)
//
// MessageId: TPM_E_AUTH_CONFLICT
//
// MessageText:
//
// NV_LoadKey blob requires both owner and blob authorization.
//
#define
TPM_E_AUTH_CONFLICT
_HRESULT_TYPEDEF_(0x8028003BL)
//
// MessageId: TPM_E_AREA_LOCKED
//
// MessageText:
//
// The NV area is locked and not writtable.
//
#define
TPM_E_AREA_LOCKED
_HRESULT_TYPEDEF_(0x8028003CL)
//
// MessageId: TPM_E_BAD_LOCALITY
//
// MessageText:
//
// The locality is incorrect for the attempted operation.
//
#define
TPM_E_BAD_LOCALITY
_HRESULT_TYPEDEF_(0x8028003DL)
//
// MessageId: TPM_E_READ_ONLY
//
// MessageText:
//
// The NV area is read only and can't be written to.
//
#define
TPM_E_READ_ONLY
_HRESULT_TYPEDEF_(0x8028003EL)
//
// MessageId: TPM_E_PER_NOWRITE
//
// MessageText:
//
// There is no protection on the write to the NV area.
//
#define
TPM_E_PER_NOWRITE
_HRESULT_TYPEDEF_(0x8028003FL)
//
// MessageId: TPM_E_FAMILYCOUNT
//
// MessageText:
//
// The family count value does not match.
//
#define
TPM_E_FAMILYCOUNT
_HRESULT_TYPEDEF_(0x80280040L)
//
// MessageId: TPM_E_WRITE_LOCKED
//
// MessageText:
//
// The NV area has already been written to.
//
#define
TPM_E_WRITE_LOCKED
_HRESULT_TYPEDEF_(0x80280041L)
//
// MessageId: TPM_E_BAD_ATTRIBUTES
//
// MessageText:
//
// The NV area attributes conflict.
//
#define
TPM_E_BAD_ATTRIBUTES
_HRESULT_TYPEDEF_(0x80280042L)
//
// MessageId: TPM_E_INVALID_STRUCTURE
//
// MessageText:
//
// The structure tag and version are invalid or inconsistent.
//
#define
TPM_E_INVALID_STRUCTURE
_HRESULT_TYPEDEF_(0x80280043L)
//
// MessageId: TPM_E_KEY_OWNER_CONTROL
//
// MessageText:
//
// The key is under control of the TPM Owner and can only be evicted by
the TPM Owner.
//
#define
TPM_E_KEY_OWNER_CONTROL
_HRESULT_TYPEDEF_(0x80280044L)
//
// MessageId: TPM_E_BAD_COUNTER
//
// MessageText:
//
// The counter handle is incorrect.
//
#define
TPM_E_BAD_COUNTER
_HRESULT_TYPEDEF_(0x80280045L)
//
// MessageId: TPM_E_NOT_FULLWRITE
//
// MessageText:
//
// The write is not a complete write of the area.
//
#define
TPM_E_NOT_FULLWRITE
_HRESULT_TYPEDEF_(0x80280046L)
//
// MessageId: TPM_E_CONTEXT_GAP
//
// MessageText:
//
// The gap between saved context counts is too large.
//
#define
TPM_E_CONTEXT_GAP
_HRESULT_TYPEDEF_(0x80280047L)
//
// MessageId: TPM_E_MAXNVWRITES
//
// MessageText:
//
// The maximum number of NV writes without an owner has been exceeded.
//
#define
TPM_E_MAXNVWRITES
_HRESULT_TYPEDEF_(0x80280048L)
//
// MessageId: TPM_E_NOOPERATOR
//
// MessageText:
//
// No operator AuthData value is set.
//
#define
TPM_E_NOOPERATOR
_HRESULT_TYPEDEF_(0x80280049L)
//
// MessageId: TPM_E_RESOURCEMISSING
//
// MessageText:
//
// The resource pointed to by context is not loaded.
//
#define
TPM_E_RESOURCEMISSING
_HRESULT_TYPEDEF_(0x8028004AL)
//
// MessageId: TPM_E_DELEGATE_LOCK
//
// MessageText:
//
// The delegate administration is locked.
//
#define
TPM_E_DELEGATE_LOCK
_HRESULT_TYPEDEF_(0x8028004BL)
//
// MessageId: TPM_E_DELEGATE_FAMILY
//
// MessageText:
//
// Attempt to manage a family other then the delegated family.
//
#define
TPM_E_DELEGATE_FAMILY
_HRESULT_TYPEDEF_(0x8028004CL)
//
// MessageId: TPM_E_DELEGATE_ADMIN
//
// MessageText:
//
// Delegation table management not enabled.
//
#define
TPM_E_DELEGATE_ADMIN
_HRESULT_TYPEDEF_(0x8028004DL)
//
// MessageId: TPM_E_TRANSPORT_NOTEXCLUSIVE
//
// MessageText:
//
// There was a command executed outside of an exclusive transport
session.
//
#define
TPM_E_TRANSPORT_NOTEXCLUSIVE
_HRESULT_TYPEDEF_(0x8028004EL)
//
// MessageId: TPM_E_OWNER_CONTROL
//
// MessageText:
//
// Attempt to context save a owner evict controlled key.
//
#define
TPM_E_OWNER_CONTROL
_HRESULT_TYPEDEF_(0x8028004FL)
//
// MessageId: TPM_E_DAA_RESOURCES
//
// MessageText:
//
// The DAA command has no resources availble to execute the command.
//
#define
TPM_E_DAA_RESOURCES
_HRESULT_TYPEDEF_(0x80280050L)
//
// MessageId: TPM_E_DAA_INPUT_DATA0
//
// MessageText:
//
// The consistency check on DAA parameter inputData0 has failed.
//
#define
TPM_E_DAA_INPUT_DATA0
_HRESULT_TYPEDEF_(0x80280051L)
//
// MessageId: TPM_E_DAA_INPUT_DATA1
//
// MessageText:
//
// The consistency check on DAA parameter inputData1 has failed.
//
#define
TPM_E_DAA_INPUT_DATA1
_HRESULT_TYPEDEF_(0x80280052L)
//
// MessageId: TPM_E_DAA_ISSUER_SETTINGS
//
// MessageText:
//
// The consistency check on DAA_issuerSettings has failed.
//
#define
TPM_E_DAA_ISSUER_SETTINGS
_HRESULT_TYPEDEF_(0x80280053L)
//
// MessageId: TPM_E_DAA_TPM_SETTINGS
//
// MessageText:
//
// The consistency check on DAA_tpmSpecific has failed.
//
#define
TPM_E_DAA_TPM_SETTINGS
_HRESULT_TYPEDEF_(0x80280054L)
//
// MessageId: TPM_E_DAA_STAGE
//
// MessageText:
//
// The atomic process indicated by the submitted DAA command is not the
expected process.
//
#define
TPM_E_DAA_STAGE
_HRESULT_TYPEDEF_(0x80280055L)
//
// MessageId: TPM_E_DAA_ISSUER_VALIDITY
//
// MessageText:
//
// The issuer's validity check has detected an inconsistency.
//
#define
TPM_E_DAA_ISSUER_VALIDITY
_HRESULT_TYPEDEF_(0x80280056L)
//
// MessageId: TPM_E_DAA_WRONG_W
//
// MessageText:
//
// The consistency check on w has failed.
//
#define
TPM_E_DAA_WRONG_W
_HRESULT_TYPEDEF_(0x80280057L)
//
// MessageId: TPM_E_BAD_HANDLE
//
// MessageText:
//
// The handle is incorrect.
//
#define
TPM_E_BAD_HANDLE
_HRESULT_TYPEDEF_(0x80280058L)
//
// MessageId: TPM_E_BAD_DELEGATE
//
// MessageText:
//
// Delegation is not correct.
//
#define
TPM_E_BAD_DELEGATE
_HRESULT_TYPEDEF_(0x80280059L)
//
// MessageId: TPM_E_BADCONTEXT
//
// MessageText:
//
// The context blob is invalid.
//
#define
TPM_E_BADCONTEXT
_HRESULT_TYPEDEF_(0x8028005AL)
//
// MessageId: TPM_E_TOOMANYCONTEXTS
//
// MessageText:
//
// Too many contexts held by the TPM.
//
#define
TPM_E_TOOMANYCONTEXTS
_HRESULT_TYPEDEF_(0x8028005BL)
//
// MessageId: TPM_E_MA_TICKET_SIGNATURE
//
// MessageText:
//
// Migration authority signature validation failure.
//
#define
TPM_E_MA_TICKET_SIGNATURE
_HRESULT_TYPEDEF_(0x8028005CL)
//
// MessageId: TPM_E_MA_DESTINATION
//
// MessageText:
//
// Migration destination not authenticated.
//
#define
TPM_E_MA_DESTINATION
_HRESULT_TYPEDEF_(0x8028005DL)
//
// MessageId: TPM_E_MA_SOURCE
//
// MessageText:
//
// Migration source incorrect.
//
#define
TPM_E_MA_SOURCE
_HRESULT_TYPEDEF_(0x8028005EL)
//
// MessageId: TPM_E_MA_AUTHORITY
//
// MessageText:
//
// Incorrect migration authority.
//
#define
TPM_E_MA_AUTHORITY
_HRESULT_TYPEDEF_(0x8028005FL)
//
// MessageId: TPM_E_PERMANENTEK
//
// MessageText:
//
// Attempt to revoke the EK and the EK is not revocable.
//
#define
TPM_E_PERMANENTEK
_HRESULT_TYPEDEF_(0x80280061L)
//
// MessageId: TPM_E_BAD_SIGNATURE
//
// MessageText:
//
// Bad signature of CMK ticket.
//
#define
TPM_E_BAD_SIGNATURE
_HRESULT_TYPEDEF_(0x80280062L)
//
// MessageId: TPM_E_NOCONTEXTSPACE
//
// MessageText:
//
// There is no room in the context list for additional contexts.
//
#define
TPM_E_NOCONTEXTSPACE
_HRESULT_TYPEDEF_(0x80280063L)
//
// TPM vendor specific hardware errors {0x0400..0x04ff}
//
//
// MessageId: TPM_E_COMMAND_BLOCKED
//
// MessageText:
//
// The command was blocked.
//
#define
TPM_E_COMMAND_BLOCKED
_HRESULT_TYPEDEF_(0x80280400L)
//
// MessageId: TPM_E_INVALID_HANDLE
//
// MessageText:
//
// The specified handle was not found.
//
#define
TPM_E_INVALID_HANDLE
_HRESULT_TYPEDEF_(0x80280401L)
//
// MessageId: TPM_E_DUPLICATE_VHANDLE
//
// MessageText:
//
// The TPM returned a duplicate handle and the command needs to be
resubmitted.
//
#define
TPM_E_DUPLICATE_VHANDLE
_HRESULT_TYPEDEF_(0x80280402L)
//
// MessageId: TPM_E_EMBEDDED_COMMAND_BLOCKED
//
// MessageText:
//
// The command within the transport was blocked.
//
#define TPM_E_EMBEDDED_COMMAND_BLOCKED
_HRESULT_TYPEDEF_(0x80280403L)
//
// MessageId: TPM_E_EMBEDDED_COMMAND_UNSUPPORTED
//
// MessageText:
//
// The command within the transport is not supported.
//
#define TPM_E_EMBEDDED_COMMAND_UNSUPPORTED
_HRESULT_TYPEDEF_(0x80280404L)
//
// TPM non-fatal hardware errors {0x0800..0x08ff}
//
//
// MessageId: TPM_E_RETRY
//
// MessageText:
//
// The TPM is too busy to respond to the command immediately, but the
command could be resubmitted at a later time.
//
#define
TPM_E_RETRY
_HRESULT_TYPEDEF_(0x80280800L)
//
// MessageId: TPM_E_NEEDS_SELFTEST
//
// MessageText:
//
// SelfTestFull has not been run.
//
#define
TPM_E_NEEDS_SELFTEST
_HRESULT_TYPEDEF_(0x80280801L)
//
// MessageId: TPM_E_DOING_SELFTEST
//
// MessageText:
//
// The TPM is currently executing a full selftest.
//
#define
TPM_E_DOING_SELFTEST
_HRESULT_TYPEDEF_(0x80280802L)
//
// MessageId: TPM_E_DEFEND_LOCK_RUNNING
//
// MessageText:
//
// The TPM is defending against dictionary attacks and is in a time-out
period.
//
#define
TPM_E_DEFEND_LOCK_RUNNING
_HRESULT_TYPEDEF_(0x80280803L)
//
// TPM Base Services error codes {0x4000..0x40ff}
//
//
// MessageId: TBS_E_INTERNAL_ERROR
//
// MessageText:
//
// An internal software error has been detected.
//
#define
TBS_E_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0x80284001L)
//
// MessageId: TBS_E_BAD_PARAMETER
//
// MessageText:
//
// One or more input parameters is bad.
//
#define
TBS_E_BAD_PARAMETER
_HRESULT_TYPEDEF_(0x80284002L)
//
// MessageId: TBS_E_INVALID_OUTPUT_POINTER
//
// MessageText:
//
// A specified output pointer is bad.
//
#define
TBS_E_INVALID_OUTPUT_POINTER
_HRESULT_TYPEDEF_(0x80284003L)
//
// MessageId: TBS_E_INVALID_CONTEXT
//
// MessageText:
//
// The specified context handle does not refer to a valid context.
//
#define
TBS_E_INVALID_CONTEXT
_HRESULT_TYPEDEF_(0x80284004L)
//
// MessageId: TBS_E_INSUFFICIENT_BUFFER
//
// MessageText:
//
// A specified output buffer is too small.
//
#define
TBS_E_INSUFFICIENT_BUFFER
_HRESULT_TYPEDEF_(0x80284005L)
//
// MessageId: TBS_E_IOERROR
//
// MessageText:
//
// An error occurred while communicating with the TPM.
//
#define
TBS_E_IOERROR
_HRESULT_TYPEDEF_(0x80284006L)
//
// MessageId: TBS_E_INVALID_CONTEXT_PARAM
//
// MessageText:
//
// One or more context parameters is invalid.
//
#define
TBS_E_INVALID_CONTEXT_PARAM
_HRESULT_TYPEDEF_(0x80284007L)
//
// MessageId: TBS_E_SERVICE_NOT_RUNNING
//
// MessageText:
//
// The TBS service is not running and could not be started.
//
#define
TBS_E_SERVICE_NOT_RUNNING
_HRESULT_TYPEDEF_(0x80284008L)
//
// MessageId: TBS_E_TOO_MANY_TBS_CONTEXTS
//
// MessageText:
//
// A new context could not be created because there are too many open
contexts.
//
#define
TBS_E_TOO_MANY_TBS_CONTEXTS
_HRESULT_TYPEDEF_(0x80284009L)
//
// MessageId: TBS_E_TOO_MANY_RESOURCES
//
// MessageText:
//
// A new virtual resource could not be created because there are too
many open virtual resources.
//
#define
TBS_E_TOO_MANY_RESOURCES
_HRESULT_TYPEDEF_(0x8028400AL)
//
// MessageId: TBS_E_SERVICE_START_PENDING
//
// MessageText:
//
// The TBS service has been started but is not yet running.
//
#define
TBS_E_SERVICE_START_PENDING
_HRESULT_TYPEDEF_(0x8028400BL)
//
// MessageId: TBS_E_PPI_NOT_SUPPORTED
//
// MessageText:
//
// The physical presence interface is not supported.
//
#define
TBS_E_PPI_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x8028400CL)
//
// MessageId: TBS_E_COMMAND_CANCELED
//
// MessageText:
//
// The command was canceled.
//
#define
TBS_E_COMMAND_CANCELED
_HRESULT_TYPEDEF_(0x8028400DL)
//
// MessageId: TBS_E_BUFFER_TOO_LARGE
//
// MessageText:
//
// The input or output buffer is too large.
//
#define
TBS_E_BUFFER_TOO_LARGE
_HRESULT_TYPEDEF_(0x8028400EL)
//
// MessageId: TBS_E_TPM_NOT_FOUND
//
// MessageText:
//
// A compatible Trusted Platform Module (TPM) Security Device cannot be
found on this computer.
//
#define
TBS_E_TPM_NOT_FOUND
_HRESULT_TYPEDEF_(0x8028400FL)
//
// MessageId: TBS_E_SERVICE_DISABLED
//
// MessageText:
//
// The TBS service has been disabled.
//
#define
TBS_E_SERVICE_DISABLED
_HRESULT_TYPEDEF_(0x80284010L)
//
// MessageId: TBS_E_NO_EVENT_LOG
//
// MessageText:
//
// No TCG event log is available.
//
#define
TBS_E_NO_EVENT_LOG
_HRESULT_TYPEDEF_(0x80284011L)
//
// TPM API error codes {0x0100..0x01ff}
//
//
// MessageId: TPMAPI_E_INVALID_STATE
//
// MessageText:
//
// The command buffer is not in the correct state.
//
#define
TPMAPI_E_INVALID_STATE
_HRESULT_TYPEDEF_(0x80290100L)
//
// MessageId: TPMAPI_E_NOT_ENOUGH_DATA
//
// MessageText:
//
// The command buffer does not contain enough data to satisfy the
request.
//
#define
TPMAPI_E_NOT_ENOUGH_DATA
_HRESULT_TYPEDEF_(0x80290101L)
//
// MessageId: TPMAPI_E_TOO_MUCH_DATA
//
// MessageText:
//
// The command buffer cannot contain any more data.
//
#define
TPMAPI_E_TOO_MUCH_DATA
_HRESULT_TYPEDEF_(0x80290102L)
//
// MessageId: TPMAPI_E_INVALID_OUTPUT_POINTER
//
// MessageText:
//
// One or more output parameters was NULL or invalid.
//
#define TPMAPI_E_INVALID_OUTPUT_POINTER
_HRESULT_TYPEDEF_(0x80290103L)
//
// MessageId: TPMAPI_E_INVALID_PARAMETER
//
// MessageText:
//
// One or more input parameters is invalid.
//
#define
TPMAPI_E_INVALID_PARAMETER
_HRESULT_TYPEDEF_(0x80290104L)
//
// MessageId: TPMAPI_E_OUT_OF_MEMORY
//
// MessageText:
//
// Not enough memory was available to satisfy the request.
//
#define
TPMAPI_E_OUT_OF_MEMORY
_HRESULT_TYPEDEF_(0x80290105L)
//
// MessageId: TPMAPI_E_BUFFER_TOO_SMALL
//
// MessageText:
//
// The specified buffer was too small.
//
#define
TPMAPI_E_BUFFER_TOO_SMALL
_HRESULT_TYPEDEF_(0x80290106L)
//
// MessageId: TPMAPI_E_INTERNAL_ERROR
//
// MessageText:
//
// An internal error was detected.
//
#define
TPMAPI_E_INTERNAL_ERROR
_HRESULT_TYPEDEF_(0x80290107L)
//
// MessageId: TPMAPI_E_ACCESS_DENIED
//
// MessageText:
//
// The caller does not have the appropriate rights to perform the
requested operation.
//
#define
TPMAPI_E_ACCESS_DENIED
_HRESULT_TYPEDEF_(0x80290108L)
//
// MessageId: TPMAPI_E_AUTHORIZATION_FAILED
//
// MessageText:
//
// The specified authorization information was invalid.
//
#define TPMAPI_E_AUTHORIZATION_FAILED
_HRESULT_TYPEDEF_(0x80290109L)
//
// MessageId: TPMAPI_E_INVALID_CONTEXT_HANDLE
//
// MessageText:
//
// The specified context handle was not valid.
//
#define TPMAPI_E_INVALID_CONTEXT_HANDLE
_HRESULT_TYPEDEF_(0x8029010AL)
//
// MessageId: TPMAPI_E_TBS_COMMUNICATION_ERROR
//
// MessageText:
//
// An error occurred while communicating with the TBS.
//
#define TPMAPI_E_TBS_COMMUNICATION_ERROR _HRESULT_TYPEDEF_(0x8029010BL)
//
// MessageId: TPMAPI_E_TPM_COMMAND_ERROR
//
// MessageText:
//
// The TPM returned an unexpected result.
//
#define
TPMAPI_E_TPM_COMMAND_ERROR
_HRESULT_TYPEDEF_(0x8029010CL)
//
// MessageId: TPMAPI_E_MESSAGE_TOO_LARGE
//
// MessageText:
//
// The message was too large for the encoding scheme.
//
#define
TPMAPI_E_MESSAGE_TOO_LARGE
_HRESULT_TYPEDEF_(0x8029010DL)
//
// MessageId: TPMAPI_E_INVALID_ENCODING
//
// MessageText:
//
// The encoding in the blob was not recognized.
//
#define
TPMAPI_E_INVALID_ENCODING
_HRESULT_TYPEDEF_(0x8029010EL)
//
// MessageId: TPMAPI_E_INVALID_KEY_SIZE
//
// MessageText:
//
// The key size is not valid.
//
#define
TPMAPI_E_INVALID_KEY_SIZE
_HRESULT_TYPEDEF_(0x8029010FL)
//
// MessageId: TPMAPI_E_ENCRYPTION_FAILED
//
// MessageText:
//
// The encryption operation failed.
//
#define
TPMAPI_E_ENCRYPTION_FAILED
_HRESULT_TYPEDEF_(0x80290110L)
//
// MessageId: TPMAPI_E_INVALID_KEY_PARAMS
//
// MessageText:
//
// The key parameters structure was not valid
//
#define
TPMAPI_E_INVALID_KEY_PARAMS
_HRESULT_TYPEDEF_(0x80290111L)
//
// MessageId: TPMAPI_E_INVALID_MIGRATION_AUTHORIZATION_BLOB
//
// MessageText:
//
// The requested supplied data does not appear to be a valid migration
authorization blob.
//
#define TPMAPI_E_INVALID_MIGRATION_AUTHORIZATION_BLOB
_HRESULT_TYPEDEF_(0x80290112L)
//
// MessageId: TPMAPI_E_INVALID_PCR_INDEX
//
// MessageText:
//
// The specified PCR index was invalid
//
#define
TPMAPI_E_INVALID_PCR_INDEX
_HRESULT_TYPEDEF_(0x80290113L)
//
// MessageId: TPMAPI_E_INVALID_DELEGATE_BLOB
//
// MessageText:
//
// The data given does not appear to be a valid delegate blob.
//
#define TPMAPI_E_INVALID_DELEGATE_BLOB
_HRESULT_TYPEDEF_(0x80290114L)
//
// MessageId: TPMAPI_E_INVALID_CONTEXT_PARAMS
//
// MessageText:
//
// One or more of the specified context parameters was not valid.
//
#define TPMAPI_E_INVALID_CONTEXT_PARAMS
_HRESULT_TYPEDEF_(0x80290115L)
//
// MessageId: TPMAPI_E_INVALID_KEY_BLOB
//
// MessageText:
//
// The data given does not appear to be a valid key blob
//
#define
TPMAPI_E_INVALID_KEY_BLOB
_HRESULT_TYPEDEF_(0x80290116L)
//
// MessageId: TPMAPI_E_INVALID_PCR_DATA
//
// MessageText:
//
// The specified PCR data was invalid.
//
#define
TPMAPI_E_INVALID_PCR_DATA
_HRESULT_TYPEDEF_(0x80290117L)
//
// MessageId: TPMAPI_E_INVALID_OWNER_AUTH
//
// MessageText:
//
// The format of the owner auth data was invalid.
//
#define
TPMAPI_E_INVALID_OWNER_AUTH
_HRESULT_TYPEDEF_(0x80290118L)
//
// MessageId: TPMAPI_E_FIPS_RNG_CHECK_FAILED
//
// MessageText:
//
// The random number generated did not pass FIPS RNG check.
//
#define TPMAPI_E_FIPS_RNG_CHECK_FAILED
_HRESULT_TYPEDEF_(0x80290119L)
//
// MessageId: TPMAPI_E_EMPTY_TCG_LOG
//
// MessageText:
//
// The TCG Event Log does not contain any data.
//
#define
TPMAPI_E_EMPTY_TCG_LOG
_HRESULT_TYPEDEF_(0x8029011AL)
//
// MessageId: TPMAPI_E_INVALID_TCG_LOG_ENTRY
//
// MessageText:
//
// An entry in the TCG Event Log was invalid.
//
#define TPMAPI_E_INVALID_TCG_LOG_ENTRY
_HRESULT_TYPEDEF_(0x8029011BL)
//
// MessageId: TPMAPI_E_TCG_SEPARATOR_ABSENT
//
// MessageText:
//
// A TCG Separator was not found.
//
#define TPMAPI_E_TCG_SEPARATOR_ABSENT
_HRESULT_TYPEDEF_(0x8029011CL)
//
// MessageId: TPMAPI_E_TCG_INVALID_DIGEST_ENTRY
//
// MessageText:
//
// A digest value in a TCG Log entry did not match hashed data.
//
#define TPMAPI_E_TCG_INVALID_DIGEST_ENTRY _HRESULT_TYPEDEF_(0x8029011DL)
//
// TBS implementation error codes {0x0200..0x02ff}
//
//
// MessageId: TBSIMP_E_BUFFER_TOO_SMALL
//
// MessageText:
//
// The specified buffer was too small.
//
#define
TBSIMP_E_BUFFER_TOO_SMALL
_HRESULT_TYPEDEF_(0x80290200L)
//
// MessageId: TBSIMP_E_CLEANUP_FAILED
//
// MessageText:
//
// The context could not be cleaned up.
//
#define
TBSIMP_E_CLEANUP_FAILED
_HRESULT_TYPEDEF_(0x80290201L)
//
// MessageId: TBSIMP_E_INVALID_CONTEXT_HANDLE
//
// MessageText:
//
// The specified context handle is invalid.
//
#define TBSIMP_E_INVALID_CONTEXT_HANDLE
_HRESULT_TYPEDEF_(0x80290202L)
//
// MessageId: TBSIMP_E_INVALID_CONTEXT_PARAM
//
// MessageText:
//
// An invalid context parameter was specified.
//
#define TBSIMP_E_INVALID_CONTEXT_PARAM
_HRESULT_TYPEDEF_(0x80290203L)
//
// MessageId: TBSIMP_E_TPM_ERROR
//
// MessageText:
//
// An error occurred while communicating with the TPM
//
#define
TBSIMP_E_TPM_ERROR
_HRESULT_TYPEDEF_(0x80290204L)
//
// MessageId: TBSIMP_E_HASH_BAD_KEY
//
// MessageText:
//
// No entry with the specified key was found.
//
#define
TBSIMP_E_HASH_BAD_KEY
_HRESULT_TYPEDEF_(0x80290205L)
//
// MessageId: TBSIMP_E_DUPLICATE_VHANDLE
//
// MessageText:
//
// The specified virtual handle matches a virtual handle already in use.
//
#define
TBSIMP_E_DUPLICATE_VHANDLE
_HRESULT_TYPEDEF_(0x80290206L)
//
// MessageId: TBSIMP_E_INVALID_OUTPUT_POINTER
//
// MessageText:
//
// The pointer to the returned handle location was NULL or invalid
//
#define TBSIMP_E_INVALID_OUTPUT_POINTER
_HRESULT_TYPEDEF_(0x80290207L)
//
// MessageId: TBSIMP_E_INVALID_PARAMETER
//
// MessageText:
//
// One or more parameters is invalid
//
#define
TBSIMP_E_INVALID_PARAMETER
_HRESULT_TYPEDEF_(0x80290208L)
//
// MessageId: TBSIMP_E_RPC_INIT_FAILED
//
// MessageText:
//
// The RPC subsystem could not be initialized.
//
#define
TBSIMP_E_RPC_INIT_FAILED
_HRESULT_TYPEDEF_(0x80290209L)
//
// MessageId: TBSIMP_E_SCHEDULER_NOT_RUNNING
//
// MessageText:
//
// The TBS scheduler is not running.
//
#define TBSIMP_E_SCHEDULER_NOT_RUNNING
_HRESULT_TYPEDEF_(0x8029020AL)
//
// MessageId: TBSIMP_E_COMMAND_CANCELED
//
// MessageText:
//
// The command was canceled.
//
#define
TBSIMP_E_COMMAND_CANCELED
_HRESULT_TYPEDEF_(0x8029020BL)
//
// MessageId: TBSIMP_E_OUT_OF_MEMORY
//
// MessageText:
//
// There was not enough memory to fulfill the request
//
#define
TBSIMP_E_OUT_OF_MEMORY
_HRESULT_TYPEDEF_(0x8029020CL)
//
// MessageId: TBSIMP_E_LIST_NO_MORE_ITEMS
//
// MessageText:
//
// The specified list is empty, or the iteration has reached the end of
the list.
//
#define
TBSIMP_E_LIST_NO_MORE_ITEMS
_HRESULT_TYPEDEF_(0x8029020DL)
//
// MessageId: TBSIMP_E_LIST_NOT_FOUND
//
// MessageText:
//
// The specified item was not found in the list.
//
#define
TBSIMP_E_LIST_NOT_FOUND
_HRESULT_TYPEDEF_(0x8029020EL)
//
// MessageId: TBSIMP_E_NOT_ENOUGH_SPACE
//
// MessageText:
//
// The TPM does not have enough space to load the requested resource.
//
#define
TBSIMP_E_NOT_ENOUGH_SPACE
_HRESULT_TYPEDEF_(0x8029020FL)
//
// MessageId: TBSIMP_E_NOT_ENOUGH_TPM_CONTEXTS
//
// MessageText:
//
// There are too many TPM contexts in use.
//
#define TBSIMP_E_NOT_ENOUGH_TPM_CONTEXTS _HRESULT_TYPEDEF_(0x80290210L)
//
// MessageId: TBSIMP_E_COMMAND_FAILED
//
// MessageText:
//
// The TPM command failed.
//
#define
TBSIMP_E_COMMAND_FAILED
_HRESULT_TYPEDEF_(0x80290211L)
//
// MessageId: TBSIMP_E_UNKNOWN_ORDINAL
//
// MessageText:
//
// The TBS does not recognize the specified ordinal.
//
#define
TBSIMP_E_UNKNOWN_ORDINAL
_HRESULT_TYPEDEF_(0x80290212L)
//
// MessageId: TBSIMP_E_RESOURCE_EXPIRED
//
// MessageText:
//
// The requested resource is no longer available.
//
#define
TBSIMP_E_RESOURCE_EXPIRED
_HRESULT_TYPEDEF_(0x80290213L)
//
// MessageId: TBSIMP_E_INVALID_RESOURCE
//
// MessageText:
//
// The resource type did not match.
//
#define
TBSIMP_E_INVALID_RESOURCE
_HRESULT_TYPEDEF_(0x80290214L)
//
// MessageId: TBSIMP_E_NOTHING_TO_UNLOAD
//
// MessageText:
//
// No resources can be unloaded.
//
#define
TBSIMP_E_NOTHING_TO_UNLOAD
_HRESULT_TYPEDEF_(0x80290215L)
//
// MessageId: TBSIMP_E_HASH_TABLE_FULL
//
// MessageText:
//
// No new entries can be added to the hash table.
//
#define
TBSIMP_E_HASH_TABLE_FULL
_HRESULT_TYPEDEF_(0x80290216L)
//
// MessageId: TBSIMP_E_TOO_MANY_TBS_CONTEXTS
//
// MessageText:
//
// A new TBS context could not be created because there are too many
open contexts.
//
#define TBSIMP_E_TOO_MANY_TBS_CONTEXTS
_HRESULT_TYPEDEF_(0x80290217L)
//
// MessageId: TBSIMP_E_TOO_MANY_RESOURCES
//
// MessageText:
//
// A new virtual resource could not be created because there are too
many open virtual resources.
//
#define
TBSIMP_E_TOO_MANY_RESOURCES
_HRESULT_TYPEDEF_(0x80290218L)
//
// MessageId: TBSIMP_E_PPI_NOT_SUPPORTED
//
// MessageText:
//
// The physical presence interface is not supported.
//
#define
TBSIMP_E_PPI_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80290219L)
//
// MessageId: TBSIMP_E_TPM_INCOMPATIBLE
//
// MessageText:
//
// TBS is not compatible with the version of TPM found on the system.
//
#define
TBSIMP_E_TPM_INCOMPATIBLE
_HRESULT_TYPEDEF_(0x8029021AL)
//
// MessageId: TBSIMP_E_NO_EVENT_LOG
//
// MessageText:
//
// No TCG event log is available.
//
#define
TBSIMP_E_NO_EVENT_LOG
_HRESULT_TYPEDEF_(0x8029021BL)
//
// TPM Physical Presence implementation error codes {0x0300..0x03ff}
//
//
// MessageId: TPM_E_PPI_ACPI_FAILURE
//
// MessageText:
//
// A general error was detected when attempting to acquire the BIOS's
response to a Physical Presence command.
//
#define
TPM_E_PPI_ACPI_FAILURE
_HRESULT_TYPEDEF_(0x80290300L)
//
// MessageId: TPM_E_PPI_USER_ABORT
//
// MessageText:
//
// The user failed to confirm the TPM operation request.
//
#define
TPM_E_PPI_USER_ABORT
_HRESULT_TYPEDEF_(0x80290301L)
//
// MessageId: TPM_E_PPI_BIOS_FAILURE
//
// MessageText:
//
//
The BIOS failure prevented the successful execution of the requested
TPM operation (e.g. invalid TPM operation request, BIOS communication
error with the TPM).
//
#define
TPM_E_PPI_BIOS_FAILURE
_HRESULT_TYPEDEF_(0x80290302L)
//
// MessageId: TPM_E_PPI_NOT_SUPPORTED
//
// MessageText:
//
// The BIOS does not support the physical presence interface.
//
#define
TPM_E_PPI_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80290303L)
//
// =======================================================
// Facility Performance Logs & Alerts (PLA) Error Messages
// =======================================================
//
//
// MessageId: PLA_E_DCS_NOT_FOUND
//
// MessageText:
//
// Data Collector Set was not found.
//
#define
PLA_E_DCS_NOT_FOUND
_HRESULT_TYPEDEF_(0x80300002L)
//
// MessageId: PLA_E_DCS_IN_USE
//
// MessageText:
//
// The Data Collector Set or one of its dependencies is already in use.
//
#define
PLA_E_DCS_IN_USE
_HRESULT_TYPEDEF_(0x803000AAL)
//
// MessageId: PLA_E_TOO_MANY_FOLDERS
//
// MessageText:
//
// Unable to start Data Collector Set because there are too many
folders.
//
#define
PLA_E_TOO_MANY_FOLDERS
_HRESULT_TYPEDEF_(0x80300045L)
//
// MessageId: PLA_E_NO_MIN_DISK
//
// MessageText:
//
// Not enough free disk space to start Data Collector Set.
//
#define
PLA_E_NO_MIN_DISK
_HRESULT_TYPEDEF_(0x80300070L)
//
// MessageId: PLA_E_DCS_ALREADY_EXISTS
//
// MessageText:
//
// Data Collector Set already exists.
//
#define
PLA_E_DCS_ALREADY_EXISTS
_HRESULT_TYPEDEF_(0x803000B7L)
//
// MessageId: PLA_S_PROPERTY_IGNORED
//
// MessageText:
//
// Property value will be ignored.
//
#define
PLA_S_PROPERTY_IGNORED
_HRESULT_TYPEDEF_(0x00300100L)
//
// MessageId: PLA_E_PROPERTY_CONFLICT
//
// MessageText:
//
// Property value conflict.
//
#define
PLA_E_PROPERTY_CONFLICT
_HRESULT_TYPEDEF_(0x80300101L)
//
// MessageId: PLA_E_DCS_SINGLETON_REQUIRED
//
// MessageText:
//
// The current configuration for this Data Collector Set requires that
it contain exactly one Data Collector.
//
#define
PLA_E_DCS_SINGLETON_REQUIRED
_HRESULT_TYPEDEF_(0x80300102L)
//
// MessageId: PLA_E_CREDENTIALS_REQUIRED
//
// MessageText:
//
// A user account is required in order to commit the current Data
Collector Set properties.
//
#define
PLA_E_CREDENTIALS_REQUIRED
_HRESULT_TYPEDEF_(0x80300103L)
//
// MessageId: PLA_E_DCS_NOT_RUNNING
//
// MessageText:
//
// Data Collector Set is not running.
//
#define
PLA_E_DCS_NOT_RUNNING
_HRESULT_TYPEDEF_(0x80300104L)
//
// MessageId: PLA_E_CONFLICT_INCL_EXCL_API
//
// MessageText:
//
//
A conflict was detected in the list of include/exclude APIs. Do not
specify the same API in both the include list and the exclude list.
//
#define
PLA_E_CONFLICT_INCL_EXCL_API
_HRESULT_TYPEDEF_(0x80300105L)
//
// MessageId: PLA_E_NETWORK_EXE_NOT_VALID
//
// MessageText:
//
// The executable path you have specified refers to a network share or
UNC path.
//
#define
PLA_E_NETWORK_EXE_NOT_VALID
_HRESULT_TYPEDEF_(0x80300106L)
//
// MessageId: PLA_E_EXE_ALREADY_CONFIGURED
//
// MessageText:
//
// The executable path you have specified is already configured for API
tracing.
//
#define
PLA_E_EXE_ALREADY_CONFIGURED
_HRESULT_TYPEDEF_(0x80300107L)
//
// MessageId: PLA_E_EXE_PATH_NOT_VALID
//
// MessageText:
//
// The executable path you have specified does not exist. Verify that
the specified path is correct.
//
#define
PLA_E_EXE_PATH_NOT_VALID
_HRESULT_TYPEDEF_(0x80300108L)
//
// MessageId: PLA_E_DC_ALREADY_EXISTS
//
// MessageText:
//
// Data Collector already exists.
//
#define
PLA_E_DC_ALREADY_EXISTS
_HRESULT_TYPEDEF_(0x80300109L)
//
// MessageId: PLA_E_DCS_START_WAIT_TIMEOUT
//
// MessageText:
//
// The wait for the Data Collector Set start notification has timed out.
//
#define
PLA_E_DCS_START_WAIT_TIMEOUT
_HRESULT_TYPEDEF_(0x8030010AL)
//
// MessageId: PLA_E_DC_START_WAIT_TIMEOUT
//
// MessageText:
//
// The wait for the Data Collector to start has timed out.
//
#define
PLA_E_DC_START_WAIT_TIMEOUT
_HRESULT_TYPEDEF_(0x8030010BL)
//
// MessageId: PLA_E_REPORT_WAIT_TIMEOUT
//
// MessageText:
//
// The wait for the report generation tool to finish has timed out.
//
#define
PLA_E_REPORT_WAIT_TIMEOUT
_HRESULT_TYPEDEF_(0x8030010CL)
//
// MessageId: PLA_E_NO_DUPLICATES
//
// MessageText:
//
// Duplicate items are not allowed.
//
#define
PLA_E_NO_DUPLICATES
_HRESULT_TYPEDEF_(0x8030010DL)
//
// MessageId: PLA_E_EXE_FULL_PATH_REQUIRED
//
// MessageText:
//
//
When specifying the executable that you want to trace, you must specify
a full path to the executable and not just a filename.
//
#define
PLA_E_EXE_FULL_PATH_REQUIRED
_HRESULT_TYPEDEF_(0x8030010EL)
//
// MessageId: PLA_E_INVALID_SESSION_NAME
//
// MessageText:
//
// The session name provided is invalid.
//
#define
PLA_E_INVALID_SESSION_NAME
_HRESULT_TYPEDEF_(0x8030010FL)
//
// MessageId: PLA_E_PLA_CHANNEL_NOT_ENABLED
//
// MessageText:
//
// The Event Log channel Microsoft-Windows-Diagnosis-PLA/Operational
must be enabled to perform this operation.
//
#define PLA_E_PLA_CHANNEL_NOT_ENABLED
_HRESULT_TYPEDEF_(0x80300110L)
//
// MessageId: PLA_E_TASKSCHED_CHANNEL_NOT_ENABLED
//
// MessageText:
//
// The Event Log channel Microsoft-Windows-TaskScheduler must be
enabled to perform this operation.
//
#define PLA_E_TASKSCHED_CHANNEL_NOT_ENABLED
_HRESULT_TYPEDEF_(0x80300111L)
//
// MessageId: PLA_E_RULES_MANAGER_FAILED
//
// MessageText:
//
// The execution of the Rules Manager failed.
//
#define
PLA_E_RULES_MANAGER_FAILED
_HRESULT_TYPEDEF_(0x80300112L)
//
// MessageId: PLA_E_CABAPI_FAILURE
//
// MessageText:
//
// An error occurred while attempting to compress or extract the data.
//
#define
PLA_E_CABAPI_FAILURE
_HRESULT_TYPEDEF_(0x80300113L)
//
// =======================================================
// Full Volume Encryption Error Messages
// =======================================================
//
//
// MessageId: FVE_E_LOCKED_VOLUME
//
// MessageText:
//
// This drive is locked by BitLocker Drive Encryption. You must unlock
this drive from Control Panel.
//
#define
FVE_E_LOCKED_VOLUME
_HRESULT_TYPEDEF_(0x80310000L)
//
// MessageId: FVE_E_NOT_ENCRYPTED
//
// MessageText:
//
// This drive is not encrypted.
//
#define
FVE_E_NOT_ENCRYPTED
_HRESULT_TYPEDEF_(0x80310001L)
//
// MessageId: FVE_E_NO_TPM_BIOS
//
// MessageText:
//
//
The BIOS did not correctly communicate with the Trusted Platform Module
(TPM). Contact the computer manufacturer for BIOS upgrade instructions.
//
#define
FVE_E_NO_TPM_BIOS
_HRESULT_TYPEDEF_(0x80310002L)
//
// MessageId: FVE_E_NO_MBR_METRIC
//
// MessageText:
//
//
The BIOS did not correctly communicate with the master boot record
(MBR). Contact the computer manufacturer for BIOS upgrade instructions.
//
#define
FVE_E_NO_MBR_METRIC
_HRESULT_TYPEDEF_(0x80310003L)
//
// MessageId: FVE_E_NO_BOOTSECTOR_METRIC
//
// MessageText:
//
//
A required TPM measurement is missing. If there is a bootable CD or DVD
in your computer, remove it, restart the computer, and turn on
BitLocker again. If the problem persists, ensure the master boot record
is up to date.
//
#define
FVE_E_NO_BOOTSECTOR_METRIC
_HRESULT_TYPEDEF_(0x80310004L)
//
// MessageId: FVE_E_NO_BOOTMGR_METRIC
//
// MessageText:
//
//
The boot sector of this drive is not compatible with BitLocker Drive
Encryption. Use the Bootrec.exe tool in the Windows Recovery
Environment to update or repair the boot manager (BOOTMGR).
//
#define
FVE_E_NO_BOOTMGR_METRIC
_HRESULT_TYPEDEF_(0x80310005L)
//
// MessageId: FVE_E_WRONG_BOOTMGR
//
// MessageText:
//
//
The boot manager of this operating system is not compatible with
BitLocker Drive Encryption. Use the Bootrec.exe tool in the Windows
Recovery Environment to update or repair the boot manager (BOOTMGR).
//
#define
FVE_E_WRONG_BOOTMGR
_HRESULT_TYPEDEF_(0x80310006L)
//
// MessageId: FVE_E_SECURE_KEY_REQUIRED
//
// MessageText:
//
// At least one secure key protector is required for this operation to
be performed.
//
#define
FVE_E_SECURE_KEY_REQUIRED
_HRESULT_TYPEDEF_(0x80310007L)
//
// MessageId: FVE_E_NOT_ACTIVATED
//
// MessageText:
//
// BitLocker Drive Encryption is not enabled on this drive. Turn on
BitLocker.
//
#define
FVE_E_NOT_ACTIVATED
_HRESULT_TYPEDEF_(0x80310008L)
//
// MessageId: FVE_E_ACTION_NOT_ALLOWED
//
// MessageText:
//
//
BitLocker Drive Encryption cannot perform the requested action. This
condition may occur when two requests are issued at the same time. Wait
a few moments and then try the action again.
//
#define
FVE_E_ACTION_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310009L)
//
// MessageId: FVE_E_AD_SCHEMA_NOT_INSTALLED
//
// MessageText:
//
//
The Active Directory Domain Services forest does not contain the
required attributes and classes to host BitLocker Drive Encryption or
Trusted Platform Module information. Contact your domain administrator
to verify that any required BitLocker Active Directory schema
extensions have been installed.
//
#define FVE_E_AD_SCHEMA_NOT_INSTALLED
_HRESULT_TYPEDEF_(0x8031000AL)
//
// MessageId: FVE_E_AD_INVALID_DATATYPE
//
// MessageText:
//
//
The type of the data obtained from Active Directory was not expected.
The BitLocker recovery information may be missing or corrupted.
//
#define
FVE_E_AD_INVALID_DATATYPE
_HRESULT_TYPEDEF_(0x8031000BL)
//
// MessageId: FVE_E_AD_INVALID_DATASIZE
//
// MessageText:
//
//
The size of the data obtained from Active Directory was not expected.
The BitLocker recovery information may be missing or corrupted.
//
#define
FVE_E_AD_INVALID_DATASIZE
_HRESULT_TYPEDEF_(0x8031000CL)
//
// MessageId: FVE_E_AD_NO_VALUES
//
// MessageText:
//
//
The attribute read from Active Directory does not contain any values.
The BitLocker recovery information may be missing or corrupted.
//
#define
FVE_E_AD_NO_VALUES
_HRESULT_TYPEDEF_(0x8031000DL)
//
// MessageId: FVE_E_AD_ATTR_NOT_SET
//
// MessageText:
//
//
The attribute was not set. Verify that you are logged on with a domain
account that has the ability to write information to Active Directory
objects.
//
#define
FVE_E_AD_ATTR_NOT_SET
_HRESULT_TYPEDEF_(0x8031000EL)
//
// MessageId: FVE_E_AD_GUID_NOT_FOUND
//
// MessageText:
//
//
The specified attribute cannot be found in Active Directory Domain
Services. Contact your domain administrator to verify that any required
BitLocker Active Directory schema extensions have been installed.
//
#define
FVE_E_AD_GUID_NOT_FOUND
_HRESULT_TYPEDEF_(0x8031000FL)
//
// MessageId: FVE_E_BAD_INFORMATION
//
// MessageText:
//
// The BitLocker metadata for the encrypted drive is not valid. You can
attempt to repair the drive to restore access.
//
#define
FVE_E_BAD_INFORMATION
_HRESULT_TYPEDEF_(0x80310010L)
//
// MessageId: FVE_E_TOO_SMALL
//
// MessageText:
//
//
The drive cannot be encrypted because it does not have enough free
space. Delete any unnecessary data on the drive to create additional
free space and then try again.
//
#define
FVE_E_TOO_SMALL
_HRESULT_TYPEDEF_(0x80310011L)
//
// MessageId: FVE_E_SYSTEM_VOLUME
//
// MessageText:
//
//
The drive cannot be encrypted because it contains system boot
information. Create a separate partition for use as the system drive
that contains the boot information and a second partition for use as
the operating system drive and then encrypt the operating system drive.
//
#define
FVE_E_SYSTEM_VOLUME
_HRESULT_TYPEDEF_(0x80310012L)
//
// MessageId: FVE_E_FAILED_WRONG_FS
//
// MessageText:
//
// The drive cannot be encrypted because the file system is not
supported.
//
#define
FVE_E_FAILED_WRONG_FS
_HRESULT_TYPEDEF_(0x80310013L)
//
// MessageId: FVE_E_BAD_PARTITION_SIZE
//
// MessageText:
//
//
The file system size is larger than the partition size in the partition
table. This drive may be corrupt or may have been tampered with. To use
it with BitLocker, you must reformat the partition.
//
#define
FVE_E_BAD_PARTITION_SIZE
_HRESULT_TYPEDEF_(0x80310014L)
//
// MessageId: FVE_E_NOT_SUPPORTED
//
// MessageText:
//
// This drive cannot be encrypted.
//
#define
FVE_E_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80310015L)
//
// MessageId: FVE_E_BAD_DATA
//
// MessageText:
//
// The data is not valid.
//
#define
FVE_E_BAD_DATA
_HRESULT_TYPEDEF_(0x80310016L)
//
// MessageId: FVE_E_VOLUME_NOT_BOUND
//
// MessageText:
//
// The data drive specified is not set to automatically unlock on the
current computer and cannot be unlocked automatically.
//
#define
FVE_E_VOLUME_NOT_BOUND
_HRESULT_TYPEDEF_(0x80310017L)
//
// MessageId: FVE_E_TPM_NOT_OWNED
//
// MessageText:
//
// You must initialize the Trusted Platform Module (TPM) before you can
use BitLocker Drive Encryption.
//
#define
FVE_E_TPM_NOT_OWNED
_HRESULT_TYPEDEF_(0x80310018L)
//
// MessageId: FVE_E_NOT_DATA_VOLUME
//
// MessageText:
//
// The operation attempted cannot be performed on an operating system
drive.
//
#define
FVE_E_NOT_DATA_VOLUME
_HRESULT_TYPEDEF_(0x80310019L)
//
// MessageId: FVE_E_AD_INSUFFICIENT_BUFFER
//
// MessageText:
//
//
The buffer supplied to a function was insufficient to contain the
returned data. Increase the buffer size before running the function
again.
//
#define
FVE_E_AD_INSUFFICIENT_BUFFER
_HRESULT_TYPEDEF_(0x8031001AL)
//
// MessageId: FVE_E_CONV_READ
//
// MessageText:
//
// A read operation failed while converting the drive. The drive was
not converted. Please re-enable BitLocker.
//
#define
FVE_E_CONV_READ
_HRESULT_TYPEDEF_(0x8031001BL)
//
// MessageId: FVE_E_CONV_WRITE
//
// MessageText:
//
// A write operation failed while converting the drive. The drive was
not converted. Please re-enable BitLocker.
//
#define
FVE_E_CONV_WRITE
_HRESULT_TYPEDEF_(0x8031001CL)
//
// MessageId: FVE_E_KEY_REQUIRED
//
// MessageText:
//
// One or more BitLocker key protectors are required. You cannot delete
the last key on this drive.
//
#define
FVE_E_KEY_REQUIRED
_HRESULT_TYPEDEF_(0x8031001DL)
//
// MessageId: FVE_E_CLUSTERING_NOT_SUPPORTED
//
// MessageText:
//
// Cluster configurations are not supported by BitLocker Drive
Encryption.
//
#define FVE_E_CLUSTERING_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x8031001EL)
//
// MessageId: FVE_E_VOLUME_BOUND_ALREADY
//
// MessageText:
//
// The drive specified is already configured to be automatically
unlocked on the current computer.
//
#define
FVE_E_VOLUME_BOUND_ALREADY
_HRESULT_TYPEDEF_(0x8031001FL)
//
// MessageId: FVE_E_OS_NOT_PROTECTED
//
// MessageText:
//
// The operating system drive is not protected by BitLocker Drive
Encryption.
//
#define
FVE_E_OS_NOT_PROTECTED
_HRESULT_TYPEDEF_(0x80310020L)
//
// MessageId: FVE_E_PROTECTION_DISABLED
//
// MessageText:
//
//
BitLocker Drive Encryption has been suspended on this drive. All
BitLocker key protectors configured for this drive are effectively
disabled, and the drive will be automatically unlocked using an
unencrypted (clear) key.
//
#define
FVE_E_PROTECTION_DISABLED
_HRESULT_TYPEDEF_(0x80310021L)
//
// MessageId: FVE_E_RECOVERY_KEY_REQUIRED
//
// MessageText:
//
//
The drive you are attempting to lock does not have any key protectors
available for encryption because BitLocker protection is currently
suspended. Re-enable BitLocker to lock this drive.
//
#define
FVE_E_RECOVERY_KEY_REQUIRED
_HRESULT_TYPEDEF_(0x80310022L)
//
// MessageId: FVE_E_FOREIGN_VOLUME
//
// MessageText:
//
//
BitLocker cannot use the Trusted Platform Module (TPM) to protect a
data drive. TPM protection can only be used with the operating system
drive.
//
#define
FVE_E_FOREIGN_VOLUME
_HRESULT_TYPEDEF_(0x80310023L)
//
// MessageId: FVE_E_OVERLAPPED_UPDATE
//
// MessageText:
//
//
The BitLocker metadata for the encrypted drive cannot be updated
because it was locked for updating by another process. Please try this
process again.
//
#define
FVE_E_OVERLAPPED_UPDATE
_HRESULT_TYPEDEF_(0x80310024L)
//
// MessageId: FVE_E_TPM_SRK_AUTH_NOT_ZERO
//
// MessageText:
//
//
The authorization data for the storage root key (SRK) of the Trusted
Platform Module (TPM) is not zero and is therefore incompatible with
BitLocker. Please initialize the TPM before attempting to use it with
BitLocker.
//
#define
FVE_E_TPM_SRK_AUTH_NOT_ZERO
_HRESULT_TYPEDEF_(0x80310025L)
//
// MessageId: FVE_E_FAILED_SECTOR_SIZE
//
// MessageText:
//
// The drive encryption algorithm cannot be used on this sector size.
//
#define
FVE_E_FAILED_SECTOR_SIZE
_HRESULT_TYPEDEF_(0x80310026L)
//
// MessageId: FVE_E_FAILED_AUTHENTICATION
//
// MessageText:
//
// The drive cannot be unlocked with the key provided. Confirm that you
have provided the correct key and try again.
//
#define
FVE_E_FAILED_AUTHENTICATION
_HRESULT_TYPEDEF_(0x80310027L)
//
// MessageId: FVE_E_NOT_OS_VOLUME
//
// MessageText:
//
// The drive specified is not the operating system drive.
//
#define
FVE_E_NOT_OS_VOLUME
_HRESULT_TYPEDEF_(0x80310028L)
//
// MessageId: FVE_E_AUTOUNLOCK_ENABLED
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be turned off on the operating system
drive until the auto unlock feature has been disabled for the fixed
data drives and removable data drives associated with this computer.
//
#define
FVE_E_AUTOUNLOCK_ENABLED
_HRESULT_TYPEDEF_(0x80310029L)
//
// MessageId: FVE_E_WRONG_BOOTSECTOR
//
// MessageText:
//
//
The system partition boot sector does not perform Trusted Platform
Module (TPM) measurements. Use the Bootrec.exe tool in the Windows
Recovery Environment to update or repair the boot sector.
//
#define
FVE_E_WRONG_BOOTSECTOR
_HRESULT_TYPEDEF_(0x8031002AL)
//
// MessageId: FVE_E_WRONG_SYSTEM_FS
//
// MessageText:
//
//
BitLocker Drive Encryption operating system drives must be formatted
with the NTFS file system in order to be encrypted. Convert the drive
to NTFS, and then turn on BitLocker.
//
#define
FVE_E_WRONG_SYSTEM_FS
_HRESULT_TYPEDEF_(0x8031002BL)
//
// MessageId: FVE_E_POLICY_PASSWORD_REQUIRED
//
// MessageText:
//
// Group Policy settings require that a recovery password be specified
before encrypting the drive.
//
#define FVE_E_POLICY_PASSWORD_REQUIRED
_HRESULT_TYPEDEF_(0x8031002CL)
//
// MessageId: FVE_E_CANNOT_SET_FVEK_ENCRYPTED
//
// MessageText:
//
//
The drive encryption algorithm and key cannot be set on a previously
encrypted drive. To encrypt this drive with BitLocker Drive Encryption,
remove the previous encryption and then turn on BitLocker.
//
#define FVE_E_CANNOT_SET_FVEK_ENCRYPTED
_HRESULT_TYPEDEF_(0x8031002DL)
//
// MessageId: FVE_E_CANNOT_ENCRYPT_NO_KEY
//
// MessageText:
//
//
BitLocker Drive Encryption cannot encrypt the specified drive because
an encryption key is not available. Add a key protector to encrypt this
drive.
//
#define
FVE_E_CANNOT_ENCRYPT_NO_KEY
_HRESULT_TYPEDEF_(0x8031002EL)
//
// MessageId: FVE_E_BOOTABLE_CDDVD
//
// MessageText:
//
//
BitLocker Drive Encryption detected bootable media (CD or DVD) in the
computer. Remove the media and restart the computer before configuring
BitLocker.
//
#define
FVE_E_BOOTABLE_CDDVD
_HRESULT_TYPEDEF_(0x80310030L)
//
// MessageId: FVE_E_PROTECTOR_EXISTS
//
// MessageText:
//
// This key protector cannot be added. Only one key protector of this
type is allowed for this drive.
//
#define
FVE_E_PROTECTOR_EXISTS
_HRESULT_TYPEDEF_(0x80310031L)
//
// MessageId: FVE_E_RELATIVE_PATH
//
// MessageText:
//
//
The recovery password file was not found because a relative path was
specified. Recovery passwords must be saved to a fully qualified path.
Environment variables configured on the computer can be used in the
path.
//
#define
FVE_E_RELATIVE_PATH
_HRESULT_TYPEDEF_(0x80310032L)
//
// MessageId: FVE_E_PROTECTOR_NOT_FOUND
//
// MessageText:
//
// The specified key protector was not found on the drive. Try another
key protector.
//
#define
FVE_E_PROTECTOR_NOT_FOUND
_HRESULT_TYPEDEF_(0x80310033L)
//
// MessageId: FVE_E_INVALID_KEY_FORMAT
//
// MessageText:
//
//
The recovery key provided is corrupt and cannot be used to access the
drive. An alternative recovery method, such as recovery password, a
data recovery agent, or a backup version of the recovery key must be
used to recover access to the drive.
//
#define
FVE_E_INVALID_KEY_FORMAT
_HRESULT_TYPEDEF_(0x80310034L)
//
// MessageId: FVE_E_INVALID_PASSWORD_FORMAT
//
// MessageText:
//
//
The format of the recovery password provided is invalid. BitLocker
recovery passwords are 48 digits. Verify that the recovery password is
in the correct format and then try again.
//
#define FVE_E_INVALID_PASSWORD_FORMAT
_HRESULT_TYPEDEF_(0x80310035L)
//
// MessageId: FVE_E_FIPS_RNG_CHECK_FAILED
//
// MessageText:
//
// The random number generator check test failed.
//
#define
FVE_E_FIPS_RNG_CHECK_FAILED
_HRESULT_TYPEDEF_(0x80310036L)
//
// MessageId: FVE_E_FIPS_PREVENTS_RECOVERY_PASSWORD
//
// MessageText:
//
//
The Group Policy setting requiring FIPS compliance prevents a local
recovery password from being generated or used by BitLocker Drive
Encryption. When operating in FIPS-compliant mode, BitLocker recovery
options can be either a recovery key stored on a USB drive or recovery
through a data recovery agent.
//
#define FVE_E_FIPS_PREVENTS_RECOVERY_PASSWORD
_HRESULT_TYPEDEF_(0x80310037L)
//
// MessageId: FVE_E_FIPS_PREVENTS_EXTERNAL_KEY_EXPORT
//
// MessageText:
//
//
The Group Policy setting requiring FIPS compliance prevents the
recovery password from being saved to Active Directory. When operating
in FIPS-compliant mode, BitLocker recovery options can be either a
recovery key stored on a USB drive or recovery through a data recovery
agent. Check your Group Policy settings configuration.
//
#define FVE_E_FIPS_PREVENTS_EXTERNAL_KEY_EXPORT
_HRESULT_TYPEDEF_(0x80310038L)
//
// MessageId: FVE_E_NOT_DECRYPTED
//
// MessageText:
//
// The drive must be fully decrypted to complete this operation.
//
#define
FVE_E_NOT_DECRYPTED
_HRESULT_TYPEDEF_(0x80310039L)
//
// MessageId: FVE_E_INVALID_PROTECTOR_TYPE
//
// MessageText:
//
// The key protector specified cannot be used for this operation.
//
#define
FVE_E_INVALID_PROTECTOR_TYPE
_HRESULT_TYPEDEF_(0x8031003AL)
//
// MessageId: FVE_E_NO_PROTECTORS_TO_TEST
//
// MessageText:
//
// No key protectors exist on the drive to perform the hardware test.
//
#define
FVE_E_NO_PROTECTORS_TO_TEST
_HRESULT_TYPEDEF_(0x8031003BL)
//
// MessageId: FVE_E_KEYFILE_NOT_FOUND
//
// MessageText:
//
//
The BitLocker startup key or recovery password cannot be found on the
USB device. Verify that you have the correct USB device, that the USB
device is plugged into the computer on an active USB port, restart the
computer, and then try again. If the problem persists, contact the
computer manufacturer for BIOS upgrade instructions.
//
#define
FVE_E_KEYFILE_NOT_FOUND
_HRESULT_TYPEDEF_(0x8031003CL)
//
// MessageId: FVE_E_KEYFILE_INVALID
//
// MessageText:
//
//
The BitLocker startup key or recovery password file provided is corrupt
or invalid. Verify that you have the correct startup key or recovery
password file and try again.
//
#define
FVE_E_KEYFILE_INVALID
_HRESULT_TYPEDEF_(0x8031003DL)
//
// MessageId: FVE_E_KEYFILE_NO_VMK
//
// MessageText:
//
//
The BitLocker encryption key cannot be obtained from the startup key or
recovery password. Verify that you have the correct startup key or
recovery password and try again.
//
#define
FVE_E_KEYFILE_NO_VMK
_HRESULT_TYPEDEF_(0x8031003EL)
//
// MessageId: FVE_E_TPM_DISABLED
//
// MessageText:
//
//
The Trusted Platform Module (TPM) is disabled. The TPM must be enabled,
initialized, and have valid ownership before it can be used with
BitLocker Drive Encryption.
//
#define
FVE_E_TPM_DISABLED
_HRESULT_TYPEDEF_(0x8031003FL)
//
// MessageId: FVE_E_NOT_ALLOWED_IN_SAFE_MODE
//
// MessageText:
//
//
The BitLocker configuration of the specified drive cannot be managed
because this computer is currently operating in Safe Mode. While in
Safe Mode, BitLocker Drive Encryption can only be used for recovery
purposes.
//
#define FVE_E_NOT_ALLOWED_IN_SAFE_MODE
_HRESULT_TYPEDEF_(0x80310040L)
//
// MessageId: FVE_E_TPM_INVALID_PCR
//
// MessageText:
//
//
The Trusted Platform Module (TPM) was not able to unlock the drive
because the system boot information has changed or a PIN was not
provided correctly. Verify that the drive has not been tampered with
and that changes to the system boot information were caused by a
trusted source. After verifying that the drive is safe to access, use
the BitLocker recovery console to unlock the drive and then suspend and
resume BitLocker to update system boot information that BitLocker
associates with this drive.
//
#define
FVE_E_TPM_INVALID_PCR
_HRESULT_TYPEDEF_(0x80310041L)
//
// MessageId: FVE_E_TPM_NO_VMK
//
// MessageText:
//
// The BitLocker encryption key cannot be obtained from the Trusted
Platform Module (TPM).
//
#define
FVE_E_TPM_NO_VMK
_HRESULT_TYPEDEF_(0x80310042L)
//
// MessageId: FVE_E_PIN_INVALID
//
// MessageText:
//
// The BitLocker encryption key cannot be obtained from the Trusted
Platform Module (TPM) and PIN.
//
#define
FVE_E_PIN_INVALID
_HRESULT_TYPEDEF_(0x80310043L)
//
// MessageId: FVE_E_AUTH_INVALID_APPLICATION
//
// MessageText:
//
// A boot application has changed since BitLocker Drive Encryption was
enabled.
//
#define FVE_E_AUTH_INVALID_APPLICATION
_HRESULT_TYPEDEF_(0x80310044L)
//
// MessageId: FVE_E_AUTH_INVALID_CONFIG
//
// MessageText:
//
// The Boot Configuration Data (BCD) settings have changed since
BitLocker Drive Encryption was enabled.
//
#define
FVE_E_AUTH_INVALID_CONFIG
_HRESULT_TYPEDEF_(0x80310045L)
//
// MessageId: FVE_E_FIPS_DISABLE_PROTECTION_NOT_ALLOWED
//
// MessageText:
//
//
The Group Policy setting requiring FIPS compliance prohibits the use of
unencrypted keys, which prevents BitLocker from being suspended on this
drive. Please contact your domain administrator for more information.
//
#define FVE_E_FIPS_DISABLE_PROTECTION_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310046L)
//
// MessageId: FVE_E_FS_NOT_EXTENDED
//
// MessageText:
//
//
This drive cannot be encrypted by BitLocker Drive Encryption because
the file system does not extend to the end of the drive. Repartition
this drive and then try again.
//
#define
FVE_E_FS_NOT_EXTENDED
_HRESULT_TYPEDEF_(0x80310047L)
//
// MessageId: FVE_E_FIRMWARE_TYPE_NOT_SUPPORTED
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be enabled on the operating system
drive. Contact the computer manufacturer for BIOS upgrade instructions.
//
#define FVE_E_FIRMWARE_TYPE_NOT_SUPPORTED _HRESULT_TYPEDEF_(0x80310048L)
//
// MessageId: FVE_E_NO_LICENSE
//
// MessageText:
//
//
This version of Windows does not include BitLocker Drive Encryption. To
use BitLocker Drive Encryption, please upgrade the operating system.
//
#define
FVE_E_NO_LICENSE
_HRESULT_TYPEDEF_(0x80310049L)
//
// MessageId: FVE_E_NOT_ON_STACK
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be used because critical BitLocker
system files are missing or corrupted. Use Windows Startup Repair to
restore these files to your computer.
//
#define
FVE_E_NOT_ON_STACK
_HRESULT_TYPEDEF_(0x8031004AL)
//
// MessageId: FVE_E_FS_MOUNTED
//
// MessageText:
//
// The drive cannot be locked when the drive is in use.
//
#define
FVE_E_FS_MOUNTED
_HRESULT_TYPEDEF_(0x8031004BL)
//
// MessageId: FVE_E_TOKEN_NOT_IMPERSONATED
//
// MessageText:
//
// The access token associated with the current thread is not an
impersonated token.
//
#define
FVE_E_TOKEN_NOT_IMPERSONATED
_HRESULT_TYPEDEF_(0x8031004CL)
//
// MessageId: FVE_E_DRY_RUN_FAILED
//
// MessageText:
//
//
The BitLocker encryption key cannot be obtained. Verify that the
Trusted Platform Module (TPM) is enabled and ownership has been taken.
If this computer does not have a TPM, verify that the USB drive is
inserted and available.
//
#define
FVE_E_DRY_RUN_FAILED
_HRESULT_TYPEDEF_(0x8031004DL)
//
// MessageId: FVE_E_REBOOT_REQUIRED
//
// MessageText:
//
// You must restart your computer before continuing with BitLocker
Drive Encryption.
//
#define
FVE_E_REBOOT_REQUIRED
_HRESULT_TYPEDEF_(0x8031004EL)
//
// MessageId: FVE_E_DEBUGGER_ENABLED
//
// MessageText:
//
// Drive encryption cannot occur while boot debugging is enabled. Use
the bcdedit command-line tool to turn off boot debugging.
//
#define
FVE_E_DEBUGGER_ENABLED
_HRESULT_TYPEDEF_(0x8031004FL)
//
// MessageId: FVE_E_RAW_ACCESS
//
// MessageText:
//
// No action was taken as BitLocker Drive Encryption is in raw access
mode.
//
#define
FVE_E_RAW_ACCESS
_HRESULT_TYPEDEF_(0x80310050L)
//
// MessageId: FVE_E_RAW_BLOCKED
//
// MessageText:
//
// BitLocker Drive Encryption cannot enter raw access mode for this
drive because the drive is currently in use.
//
#define
FVE_E_RAW_BLOCKED
_HRESULT_TYPEDEF_(0x80310051L)
//
// MessageId: FVE_E_BCD_APPLICATIONS_PATH_INCORRECT
//
// MessageText:
//
//
The path specified in the Boot Configuration Data (BCD) for a BitLocker
Drive Encryption integrity-protected application is incorrect. Please
verify and correct your BCD settings and try again.
//
#define FVE_E_BCD_APPLICATIONS_PATH_INCORRECT
_HRESULT_TYPEDEF_(0x80310052L)
//
// MessageId: FVE_E_NOT_ALLOWED_IN_VERSION
//
// MessageText:
//
// BitLocker Drive Encryption can only be used for recovery purposes
when the computer is running Windows Recovery Environment.
//
#define
FVE_E_NOT_ALLOWED_IN_VERSION
_HRESULT_TYPEDEF_(0x80310053L)
//
// MessageId: FVE_E_NO_AUTOUNLOCK_MASTER_KEY
//
// MessageText:
//
// The auto-unlock master key was not available from the operating
system drive.
//
#define FVE_E_NO_AUTOUNLOCK_MASTER_KEY
_HRESULT_TYPEDEF_(0x80310054L)
//
// MessageId: FVE_E_MOR_FAILED
//
// MessageText:
//
// The system firmware failed to enable clearing of system memory when
the computer was restarted.
//
#define
FVE_E_MOR_FAILED
_HRESULT_TYPEDEF_(0x80310055L)
//
// MessageId: FVE_E_HIDDEN_VOLUME
//
// MessageText:
//
// The hidden drive cannot be encrypted.
//
#define
FVE_E_HIDDEN_VOLUME
_HRESULT_TYPEDEF_(0x80310056L)
//
// MessageId: FVE_E_TRANSIENT_STATE
//
// MessageText:
//
// BitLocker encryption keys were ignored because the drive was in a
transient state.
//
#define
FVE_E_TRANSIENT_STATE
_HRESULT_TYPEDEF_(0x80310057L)
//
// MessageId: FVE_E_PUBKEY_NOT_ALLOWED
//
// MessageText:
//
// Public key based protectors are not allowed on this drive.
//
#define
FVE_E_PUBKEY_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310058L)
//
// MessageId: FVE_E_VOLUME_HANDLE_OPEN
//
// MessageText:
//
//
BitLocker Drive Encryption is already performing an operation on this
drive. Please complete all operations before continuing.
//
#define
FVE_E_VOLUME_HANDLE_OPEN
_HRESULT_TYPEDEF_(0x80310059L)
//
// MessageId: FVE_E_NO_FEATURE_LICENSE
//
// MessageText:
//
//
This version of Windows does not support this feature of BitLocker
Drive Encryption. To use this feature, upgrade the operating system..
//
#define
FVE_E_NO_FEATURE_LICENSE
_HRESULT_TYPEDEF_(0x8031005AL)
//
// MessageId: FVE_E_INVALID_STARTUP_OPTIONS
//
// MessageText:
//
//
The Group Policy settings for BitLocker startup options are in conflict
and cannot be applied. Contact your system administrator for more
information.
//
#define FVE_E_INVALID_STARTUP_OPTIONS
_HRESULT_TYPEDEF_(0x8031005BL)
//
// MessageId: FVE_E_POLICY_RECOVERY_PASSWORD_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit the creation of a recovery
password.
//
#define FVE_E_POLICY_RECOVERY_PASSWORD_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x8031005CL)
//
// MessageId: FVE_E_POLICY_RECOVERY_PASSWORD_REQUIRED
//
// MessageText:
//
// Group Policy settings require the creation of a recovery password.
//
#define FVE_E_POLICY_RECOVERY_PASSWORD_REQUIRED
_HRESULT_TYPEDEF_(0x8031005DL)
//
// MessageId: FVE_E_POLICY_RECOVERY_KEY_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit the creation of a recovery key.
//
#define FVE_E_POLICY_RECOVERY_KEY_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x8031005EL)
//
// MessageId: FVE_E_POLICY_RECOVERY_KEY_REQUIRED
//
// MessageText:
//
// Group Policy settings require the creation of a recovery key.
//
#define FVE_E_POLICY_RECOVERY_KEY_REQUIRED
_HRESULT_TYPEDEF_(0x8031005FL)
//
// MessageId: FVE_E_POLICY_STARTUP_PIN_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit the use of a PIN at startup.
Please choose a different BitLocker startup option.
//
#define FVE_E_POLICY_STARTUP_PIN_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310060L)
//
// MessageId: FVE_E_POLICY_STARTUP_PIN_REQUIRED
//
// MessageText:
//
// Group Policy settings require the use of a PIN at startup. Please
choose this BitLocker startup option.
//
#define FVE_E_POLICY_STARTUP_PIN_REQUIRED _HRESULT_TYPEDEF_(0x80310061L)
//
// MessageId: FVE_E_POLICY_STARTUP_KEY_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit the use of a startup key. Please
choose a different BitLocker startup option.
//
#define FVE_E_POLICY_STARTUP_KEY_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310062L)
//
// MessageId: FVE_E_POLICY_STARTUP_KEY_REQUIRED
//
// MessageText:
//
// Group Policy settings require the use of a startup key. Please
choose this BitLocker startup option.
//
#define FVE_E_POLICY_STARTUP_KEY_REQUIRED _HRESULT_TYPEDEF_(0x80310063L)
//
// MessageId: FVE_E_POLICY_STARTUP_PIN_KEY_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit the use of a startup key and
PIN. Please choose a different BitLocker startup option.
//
#define FVE_E_POLICY_STARTUP_PIN_KEY_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310064L)
//
// MessageId: FVE_E_POLICY_STARTUP_PIN_KEY_REQUIRED
//
// MessageText:
//
// Group Policy settings require the use of a startup key and PIN.
Please choose this BitLocker startup option.
//
#define FVE_E_POLICY_STARTUP_PIN_KEY_REQUIRED
_HRESULT_TYPEDEF_(0x80310065L)
//
// MessageId: FVE_E_POLICY_STARTUP_TPM_NOT_ALLOWED
//
// MessageText:
//
// Group policy does not permit the use of TPM-only at startup. Please
choose a different BitLocker startup option.
//
#define FVE_E_POLICY_STARTUP_TPM_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310066L)
//
// MessageId: FVE_E_POLICY_STARTUP_TPM_REQUIRED
//
// MessageText:
//
// Group Policy settings require the use of TPM-only at startup. Please
choose this BitLocker startup option.
//
#define FVE_E_POLICY_STARTUP_TPM_REQUIRED _HRESULT_TYPEDEF_(0x80310067L)
//
// MessageId: FVE_E_POLICY_INVALID_PIN_LENGTH
//
// MessageText:
//
// The PIN provided does not meet minimum or maximum length
requirements.
//
#define FVE_E_POLICY_INVALID_PIN_LENGTH
_HRESULT_TYPEDEF_(0x80310068L)
//
// MessageId: FVE_E_KEY_PROTECTOR_NOT_SUPPORTED
//
// MessageText:
//
//
The key protector is not supported by the version of BitLocker Drive
Encryption currently on the drive. Upgrade the drive to add the key
protector.
//
#define FVE_E_KEY_PROTECTOR_NOT_SUPPORTED _HRESULT_TYPEDEF_(0x80310069L)
//
// MessageId: FVE_E_POLICY_PASSPHRASE_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit the creation of a password.
//
#define FVE_E_POLICY_PASSPHRASE_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x8031006AL)
//
// MessageId: FVE_E_POLICY_PASSPHRASE_REQUIRED
//
// MessageText:
//
// Group Policy settings require the creation of a password.
//
#define FVE_E_POLICY_PASSPHRASE_REQUIRED _HRESULT_TYPEDEF_(0x8031006BL)
//
// MessageId: FVE_E_FIPS_PREVENTS_PASSPHRASE
//
// MessageText:
//
//
The Group Policy setting requiring FIPS compliance prevents passwords
from being generated or used. Please contact your system administrator
for more information.
//
#define FVE_E_FIPS_PREVENTS_PASSPHRASE
_HRESULT_TYPEDEF_(0x8031006CL)
//
// MessageId: FVE_E_OS_VOLUME_PASSPHRASE_NOT_ALLOWED
//
// MessageText:
//
// A password cannot be added to the operating system drive.
//
#define FVE_E_OS_VOLUME_PASSPHRASE_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x8031006DL)
//
// MessageId: FVE_E_INVALID_BITLOCKER_OID
//
// MessageText:
//
//
The BitLocker object identifier (OID) on the drive appears to be
invalid or corrupt. Use manage-BDE to reset the OID on this drive.
//
#define
FVE_E_INVALID_BITLOCKER_OID
_HRESULT_TYPEDEF_(0x8031006EL)
//
// MessageId: FVE_E_VOLUME_TOO_SMALL
//
// MessageText:
//
// The drive is too small to be protected using BitLocker Drive
Encryption.
//
#define
FVE_E_VOLUME_TOO_SMALL
_HRESULT_TYPEDEF_(0x8031006FL)
//
// MessageId: FVE_E_DV_NOT_SUPPORTED_ON_FS
//
// MessageText:
//
//
The selected discovery drive type is incompatible with the file system
on the drive. BitLocker To Go discovery drives must be created on FAT
formatted drives.
//
#define
FVE_E_DV_NOT_SUPPORTED_ON_FS
_HRESULT_TYPEDEF_(0x80310070L)
//
// MessageId: FVE_E_DV_NOT_ALLOWED_BY_GP
//
// MessageText:
//
//
The selected discovery drive type is not allowed by the computer's
Group Policy settings. Verify that Group Policy settings allow the
creation of discovery drives for use with BitLocker To Go.
//
#define
FVE_E_DV_NOT_ALLOWED_BY_GP
_HRESULT_TYPEDEF_(0x80310071L)
//
// MessageId: FVE_E_POLICY_USER_CERTIFICATE_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit user certificates such as smart
cards to be used with BitLocker Drive Encryption.
//
#define FVE_E_POLICY_USER_CERTIFICATE_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310072L)
//
// MessageId: FVE_E_POLICY_USER_CERTIFICATE_REQUIRED
//
// MessageText:
//
//
Group Policy settings require that you have a valid user certificate,
such as a smart card, to be used with BitLocker Drive Encryption.
//
#define FVE_E_POLICY_USER_CERTIFICATE_REQUIRED
_HRESULT_TYPEDEF_(0x80310073L)
//
// MessageId: FVE_E_POLICY_USER_CERT_MUST_BE_HW
//
// MessageText:
//
// Group Policy settings requires that you use a smart card-based key
protector with BitLocker Drive Encryption.
//
#define FVE_E_POLICY_USER_CERT_MUST_BE_HW _HRESULT_TYPEDEF_(0x80310074L)
//
// MessageId: FVE_E_POLICY_USER_CONFIGURE_FDV_AUTOUNLOCK_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit BitLocker-protected fixed data
drives to be automatically unlocked.
//
#define FVE_E_POLICY_USER_CONFIGURE_FDV_AUTOUNLOCK_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310075L)
//
// MessageId: FVE_E_POLICY_USER_CONFIGURE_RDV_AUTOUNLOCK_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit BitLocker-protected removable
data drives to be automatically unlocked.
//
#define FVE_E_POLICY_USER_CONFIGURE_RDV_AUTOUNLOCK_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310076L)
//
// MessageId: FVE_E_POLICY_USER_CONFIGURE_RDV_NOT_ALLOWED
//
// MessageText:
//
// Group Policy settings do not permit you to configure BitLocker Drive
Encryption on removable data drives.
//
#define FVE_E_POLICY_USER_CONFIGURE_RDV_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310077L)
//
// MessageId: FVE_E_POLICY_USER_ENABLE_RDV_NOT_ALLOWED
//
// MessageText:
//
//
Group Policy settings do not permit you to turn on BitLocker Drive
Encryption on removable data drives. Please contact your system
administrator if you need to turn on BitLocker.
//
#define FVE_E_POLICY_USER_ENABLE_RDV_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310078L)
//
// MessageId: FVE_E_POLICY_USER_DISABLE_RDV_NOT_ALLOWED
//
// MessageText:
//
//
Group Policy settings do not permit turning off BitLocker Drive
Encryption on removable data drives. Please contact your system
administrator if you need to turn off BitLocker.
//
#define FVE_E_POLICY_USER_DISABLE_RDV_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310079L)
//
// MessageId: FVE_E_POLICY_INVALID_PASSPHRASE_LENGTH
//
// MessageText:
//
//
Your password does not meet minimum password length requirements. By
default, passwords must be at least 8 characters in length. Check with
your system administrator for the password length requirement in your
organization.
//
#define FVE_E_POLICY_INVALID_PASSPHRASE_LENGTH
_HRESULT_TYPEDEF_(0x80310080L)
//
// MessageId: FVE_E_POLICY_PASSPHRASE_TOO_SIMPLE
//
// MessageText:
//
//
Your password does not meet the complexity requirements set by your
system administrator. Try adding upper and lowercase characters,
numbers, and symbols.
//
#define FVE_E_POLICY_PASSPHRASE_TOO_SIMPLE
_HRESULT_TYPEDEF_(0x80310081L)
//
// MessageId: FVE_E_RECOVERY_PARTITION
//
// MessageText:
//
// This drive cannot be encrypted because it is reserved for Windows
System Recovery Options.
//
#define
FVE_E_RECOVERY_PARTITION
_HRESULT_TYPEDEF_(0x80310082L)
//
// MessageId: FVE_E_POLICY_CONFLICT_FDV_RK_OFF_AUK_ON
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be applied to this drive because of
conflicting Group Policy settings. BitLocker cannot be configured to
automatically unlock fixed data drives when user recovery options are
disabled. If you want BitLocker-protected fixed data drives to be
automatically unlocked after key validation has occurred, please ask
your system administrator to resolve the settings conflict before
enabling BitLocker.
//
#define FVE_E_POLICY_CONFLICT_FDV_RK_OFF_AUK_ON
_HRESULT_TYPEDEF_(0x80310083L)
//
// MessageId: FVE_E_POLICY_CONFLICT_RDV_RK_OFF_AUK_ON
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be applied to this drive because of
conflicting Group Policy settings. BitLocker cannot be configured to
automatically unlock removable data drives when user recovery option
are disabled. If you want BitLocker-protected removable data drives to
be automatically unlocked after key validation has occured, please ask
your system administrator to resolve the settings conflict before
enabling BitLocker.
//
#define FVE_E_POLICY_CONFLICT_RDV_RK_OFF_AUK_ON
_HRESULT_TYPEDEF_(0x80310084L)
//
// MessageId: FVE_E_NON_BITLOCKER_OID
//
// MessageText:
//
//
The Enhanced Key Usage (EKU) attribute of the specified certificate
does not permit it to be used for BitLocker Drive Encryption. BitLocker
does not require that a certificate have an EKU attribute, but if one
is configured it must be set to an object identifier (OID) that matches
the OID configured for BitLocker.
//
#define
FVE_E_NON_BITLOCKER_OID
_HRESULT_TYPEDEF_(0x80310085L)
//
// MessageId: FVE_E_POLICY_PROHIBITS_SELFSIGNED
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be applied to this drive as currently
configured because of Group Policy settings. The certificate you
provided for drive encryption is self-signed. Current Group Policy
settings do not permit the use of self-signed certificates. Obtain a
new certificate from your certification authority before attempting to
enable BitLocker.
//
#define FVE_E_POLICY_PROHIBITS_SELFSIGNED _HRESULT_TYPEDEF_(0x80310086L)
//
// MessageId: FVE_E_POLICY_CONFLICT_RO_AND_STARTUP_KEY_REQUIRED
//
// MessageText:
//
//
BitLocker Encryption cannot be applied to this drive because of
conflicting Group Policy settings. When write access to drives not
protected by BitLocker is denied, the use of a USB startup key cannot
be required. Please have your system administrator resolve these policy
conflicts before attempting to enable BitLocker.
//
#define FVE_E_POLICY_CONFLICT_RO_AND_STARTUP_KEY_REQUIRED
_HRESULT_TYPEDEF_(0x80310087L)
//
// MessageId: FVE_E_CONV_RECOVERY_FAILED
//
// MessageText:
//
//
BitLocker Drive Encryption failed to recover from an abruptly
terminated conversion. This could be due to either all conversion logs
being corrupted or the media being write-protected.
//
#define
FVE_E_CONV_RECOVERY_FAILED
_HRESULT_TYPEDEF_(0x80310088L)
//
// MessageId: FVE_E_VIRTUALIZED_SPACE_TOO_BIG
//
// MessageText:
//
// The requested virtualization size is too big.
//
#define FVE_E_VIRTUALIZED_SPACE_TOO_BIG
_HRESULT_TYPEDEF_(0x80310089L)
//
// MessageId: FVE_E_POLICY_CONFLICT_OSV_RP_OFF_ADB_ON
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be applied to this drive because
there are conflicting Group Policy settings for recovery options on
operating system drives. Storing recovery information to Active
Directory Domain Services cannot be required when the generation of
recovery passwords is not permitted. Please have your system
administrator resolve these policy conflicts before attempting to
enable BitLocker.
//
#define FVE_E_POLICY_CONFLICT_OSV_RP_OFF_ADB_ON
_HRESULT_TYPEDEF_(0x80310090L)
//
// MessageId: FVE_E_POLICY_CONFLICT_FDV_RP_OFF_ADB_ON
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be applied to this drive because
there are conflicting Group Policy settings for recovery options on
fixed data drives. Storing recovery information to Active Directory
Domain Services cannot be required when the generation of recovery
passwords is not permitted. Please have your system administrator
resolve these policy conflicts before attempting to enable BitLocker.
//
#define FVE_E_POLICY_CONFLICT_FDV_RP_OFF_ADB_ON
_HRESULT_TYPEDEF_(0x80310091L)
//
// MessageId: FVE_E_POLICY_CONFLICT_RDV_RP_OFF_ADB_ON
//
// MessageText:
//
//
BitLocker Drive Encryption cannot be applied to this drive because
there are conflicting Group Policy settings for recovery options on
removable data drives. Storing recovery information to Active Directory
Domain Services cannot be required when the generation of recovery
passwords is not permitted. Please have your system administrator
resolve these policy conflicts before attempting to enable BitLocker.
//
#define FVE_E_POLICY_CONFLICT_RDV_RP_OFF_ADB_ON
_HRESULT_TYPEDEF_(0x80310092L)
//
// MessageId: FVE_E_NON_BITLOCKER_KU
//
// MessageText:
//
//
The Key Usage (KU) attribute of the specified certificate does not
permit it to be used for BitLocker Drive Encryption. BitLocker does not
require that a certificate have a KU attribute, but if one is
configured it must be set to either Key Encipherment or Key Agreement.
//
#define
FVE_E_NON_BITLOCKER_KU
_HRESULT_TYPEDEF_(0x80310093L)
//
// MessageId: FVE_E_PRIVATEKEY_AUTH_FAILED
//
// MessageText:
//
//
The private key associated with the specified certificate cannot be
authorized. The private key authorization was either not provided or
the provided authorization was invalid.
//
#define
FVE_E_PRIVATEKEY_AUTH_FAILED
_HRESULT_TYPEDEF_(0x80310094L)
//
// MessageId: FVE_E_REMOVAL_OF_DRA_FAILED
//
// MessageText:
//
// Removal of the data recovery agent certificate must be done using
the Certificates snap-in.
//
#define
FVE_E_REMOVAL_OF_DRA_FAILED
_HRESULT_TYPEDEF_(0x80310095L)
//
// MessageId: FVE_E_OPERATION_NOT_SUPPORTED_ON_VISTA_VOLUME
//
// MessageText:
//
//
This drive was encrypted using the version of BitLocker Drive
Encryption included with Windows Vista and Windows Server 2008 which
does not support organizational identifiers. To specify organizational
identifiers for this drive upgrade the drive encryption to the latest
version using the "manage-bde -upgrade" command.
//
#define FVE_E_OPERATION_NOT_SUPPORTED_ON_VISTA_VOLUME
_HRESULT_TYPEDEF_(0x80310096L)
//
// MessageId: FVE_E_CANT_LOCK_AUTOUNLOCK_ENABLED_VOLUME
//
// MessageText:
//
//
The drive cannot be locked because it is automatically unlocked on this
computer. Remove the automatic unlock protector to lock this
drive.
//
#define FVE_E_CANT_LOCK_AUTOUNLOCK_ENABLED_VOLUME
_HRESULT_TYPEDEF_(0x80310097L)
//
// MessageId: FVE_E_FIPS_HASH_KDF_NOT_ALLOWED
//
// MessageText:
//
//
The default BitLocker Key Derivation Function SP800-56A for ECC smart
cards is not supported by your smart card. The Group Policy setting
requiring FIPS-compliance prevents BitLocker from using any other key
derivation function for encryption. You have to use a FIPS compliant
smart card in FIPS restricted environments.
//
#define FVE_E_FIPS_HASH_KDF_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80310098L)
//
// MessageId: FVE_E_ENH_PIN_INVALID
//
// MessageText:
//
//
The BitLocker encryption key could not be obtained from the Trusted
Platform Module (TPM) and enhanced PIN. Try using a PIN containing only
numerals.
//
#define
FVE_E_ENH_PIN_INVALID
_HRESULT_TYPEDEF_(0x80310099L)
//
// MessageId: FVE_E_INVALID_PIN_CHARS
//
// MessageText:
//
// The requested TPM PIN contains invalid characters.
//
#define
FVE_E_INVALID_PIN_CHARS
_HRESULT_TYPEDEF_(0x8031009AL)
//
// MessageId: FVE_E_INVALID_DATUM_TYPE
//
// MessageText:
//
//
The management information stored on the drive contained an unknown
type. If you are using an old version of Windows, try accessing the
drive from the latest version.
//
#define
FVE_E_INVALID_DATUM_TYPE
_HRESULT_TYPEDEF_(0x8031009BL)
//
// =======================================================
// Windows Filtering Platform Error Messages
// =======================================================
//
//
// MessageId: FWP_E_CALLOUT_NOT_FOUND
//
// MessageText:
//
// The callout does not exist.
//
#define
FWP_E_CALLOUT_NOT_FOUND
_HRESULT_TYPEDEF_(0x80320001L)
//
// MessageId: FWP_E_CONDITION_NOT_FOUND
//
// MessageText:
//
// The filter condition does not exist.
//
#define
FWP_E_CONDITION_NOT_FOUND
_HRESULT_TYPEDEF_(0x80320002L)
//
// MessageId: FWP_E_FILTER_NOT_FOUND
//
// MessageText:
//
// The filter does not exist.
//
#define
FWP_E_FILTER_NOT_FOUND
_HRESULT_TYPEDEF_(0x80320003L)
//
// MessageId: FWP_E_LAYER_NOT_FOUND
//
// MessageText:
//
// The layer does not exist.
//
#define
FWP_E_LAYER_NOT_FOUND
_HRESULT_TYPEDEF_(0x80320004L)
//
// MessageId: FWP_E_PROVIDER_NOT_FOUND
//
// MessageText:
//
// The provider does not exist.
//
#define
FWP_E_PROVIDER_NOT_FOUND
_HRESULT_TYPEDEF_(0x80320005L)
//
// MessageId: FWP_E_PROVIDER_CONTEXT_NOT_FOUND
//
// MessageText:
//
// The provider context does not exist.
//
#define FWP_E_PROVIDER_CONTEXT_NOT_FOUND _HRESULT_TYPEDEF_(0x80320006L)
//
// MessageId: FWP_E_SUBLAYER_NOT_FOUND
//
// MessageText:
//
// The sublayer does not exist.
//
#define
FWP_E_SUBLAYER_NOT_FOUND
_HRESULT_TYPEDEF_(0x80320007L)
//
// MessageId: FWP_E_NOT_FOUND
//
// MessageText:
//
// The object does not exist.
//
#define
FWP_E_NOT_FOUND
_HRESULT_TYPEDEF_(0x80320008L)
//
// MessageId: FWP_E_ALREADY_EXISTS
//
// MessageText:
//
// An object with that GUID or LUID already exists.
//
#define
FWP_E_ALREADY_EXISTS
_HRESULT_TYPEDEF_(0x80320009L)
//
// MessageId: FWP_E_IN_USE
//
// MessageText:
//
// The object is referenced by other objects so cannot be deleted.
//
#define
FWP_E_IN_USE
_HRESULT_TYPEDEF_(0x8032000AL)
//
// MessageId: FWP_E_DYNAMIC_SESSION_IN_PROGRESS
//
// MessageText:
//
// The call is not allowed from within a dynamic session.
//
#define FWP_E_DYNAMIC_SESSION_IN_PROGRESS _HRESULT_TYPEDEF_(0x8032000BL)
//
// MessageId: FWP_E_WRONG_SESSION
//
// MessageText:
//
// The call was made from the wrong session so cannot be completed.
//
#define
FWP_E_WRONG_SESSION
_HRESULT_TYPEDEF_(0x8032000CL)
//
// MessageId: FWP_E_NO_TXN_IN_PROGRESS
//
// MessageText:
//
// The call must be made from within an explicit transaction.
//
#define
FWP_E_NO_TXN_IN_PROGRESS
_HRESULT_TYPEDEF_(0x8032000DL)
//
// MessageId: FWP_E_TXN_IN_PROGRESS
//
// MessageText:
//
// The call is not allowed from within an explicit transaction.
//
#define
FWP_E_TXN_IN_PROGRESS
_HRESULT_TYPEDEF_(0x8032000EL)
//
// MessageId: FWP_E_TXN_ABORTED
//
// MessageText:
//
// The explicit transaction has been forcibly cancelled.
//
#define
FWP_E_TXN_ABORTED
_HRESULT_TYPEDEF_(0x8032000FL)
//
// MessageId: FWP_E_SESSION_ABORTED
//
// MessageText:
//
// The session has been cancelled.
//
#define
FWP_E_SESSION_ABORTED
_HRESULT_TYPEDEF_(0x80320010L)
//
// MessageId: FWP_E_INCOMPATIBLE_TXN
//
// MessageText:
//
// The call is not allowed from within a read-only transaction.
//
#define
FWP_E_INCOMPATIBLE_TXN
_HRESULT_TYPEDEF_(0x80320011L)
//
// MessageId: FWP_E_TIMEOUT
//
// MessageText:
//
// The call timed out while waiting to acquire the transaction lock.
//
#define
FWP_E_TIMEOUT
_HRESULT_TYPEDEF_(0x80320012L)
//
// MessageId: FWP_E_NET_EVENTS_DISABLED
//
// MessageText:
//
// Collection of network diagnostic events is disabled.
//
#define
FWP_E_NET_EVENTS_DISABLED
_HRESULT_TYPEDEF_(0x80320013L)
//
// MessageId: FWP_E_INCOMPATIBLE_LAYER
//
// MessageText:
//
// The operation is not supported by the specified layer.
//
#define
FWP_E_INCOMPATIBLE_LAYER
_HRESULT_TYPEDEF_(0x80320014L)
//
// MessageId: FWP_E_KM_CLIENTS_ONLY
//
// MessageText:
//
// The call is allowed for kernel-mode callers only.
//
#define
FWP_E_KM_CLIENTS_ONLY
_HRESULT_TYPEDEF_(0x80320015L)
//
// MessageId: FWP_E_LIFETIME_MISMATCH
//
// MessageText:
//
// The call tried to associate two objects with incompatible lifetimes.
//
#define
FWP_E_LIFETIME_MISMATCH
_HRESULT_TYPEDEF_(0x80320016L)
//
// MessageId: FWP_E_BUILTIN_OBJECT
//
// MessageText:
//
// The object is built in so cannot be deleted.
//
#define
FWP_E_BUILTIN_OBJECT
_HRESULT_TYPEDEF_(0x80320017L)
//
// MessageId: FWP_E_TOO_MANY_CALLOUTS
//
// MessageText:
//
// The maximum number of callouts has been reached.
//
#define
FWP_E_TOO_MANY_CALLOUTS
_HRESULT_TYPEDEF_(0x80320018L)
//
// MessageId: FWP_E_NOTIFICATION_DROPPED
//
// MessageText:
//
// A notification could not be delivered because a message queue is at
its maximum capacity.
//
#define
FWP_E_NOTIFICATION_DROPPED
_HRESULT_TYPEDEF_(0x80320019L)
//
// MessageId: FWP_E_TRAFFIC_MISMATCH
//
// MessageText:
//
// The traffic parameters do not match those for the security
association context.
//
#define
FWP_E_TRAFFIC_MISMATCH
_HRESULT_TYPEDEF_(0x8032001AL)
//
// MessageId: FWP_E_INCOMPATIBLE_SA_STATE
//
// MessageText:
//
// The call is not allowed for the current security association state.
//
#define
FWP_E_INCOMPATIBLE_SA_STATE
_HRESULT_TYPEDEF_(0x8032001BL)
//
// MessageId: FWP_E_NULL_POINTER
//
// MessageText:
//
// A required pointer is null.
//
#define
FWP_E_NULL_POINTER
_HRESULT_TYPEDEF_(0x8032001CL)
//
// MessageId: FWP_E_INVALID_ENUMERATOR
//
// MessageText:
//
// An enumerator is not valid.
//
#define
FWP_E_INVALID_ENUMERATOR
_HRESULT_TYPEDEF_(0x8032001DL)
//
// MessageId: FWP_E_INVALID_FLAGS
//
// MessageText:
//
// The flags field contains an invalid value.
//
#define
FWP_E_INVALID_FLAGS
_HRESULT_TYPEDEF_(0x8032001EL)
//
// MessageId: FWP_E_INVALID_NET_MASK
//
// MessageText:
//
// A network mask is not valid.
//
#define
FWP_E_INVALID_NET_MASK
_HRESULT_TYPEDEF_(0x8032001FL)
//
// MessageId: FWP_E_INVALID_RANGE
//
// MessageText:
//
// An FWP_RANGE is not valid.
//
#define
FWP_E_INVALID_RANGE
_HRESULT_TYPEDEF_(0x80320020L)
//
// MessageId: FWP_E_INVALID_INTERVAL
//
// MessageText:
//
// The time interval is not valid.
//
#define
FWP_E_INVALID_INTERVAL
_HRESULT_TYPEDEF_(0x80320021L)
//
// MessageId: FWP_E_ZERO_LENGTH_ARRAY
//
// MessageText:
//
// An array that must contain at least one element is zero length.
//
#define
FWP_E_ZERO_LENGTH_ARRAY
_HRESULT_TYPEDEF_(0x80320022L)
//
// MessageId: FWP_E_NULL_DISPLAY_NAME
//
// MessageText:
//
// The displayData.name field cannot be null.
//
#define
FWP_E_NULL_DISPLAY_NAME
_HRESULT_TYPEDEF_(0x80320023L)
//
// MessageId: FWP_E_INVALID_ACTION_TYPE
//
// MessageText:
//
// The action type is not one of the allowed action types for a filter.
//
#define
FWP_E_INVALID_ACTION_TYPE
_HRESULT_TYPEDEF_(0x80320024L)
//
// MessageId: FWP_E_INVALID_WEIGHT
//
// MessageText:
//
// The filter weight is not valid.
//
#define
FWP_E_INVALID_WEIGHT
_HRESULT_TYPEDEF_(0x80320025L)
//
// MessageId: FWP_E_MATCH_TYPE_MISMATCH
//
// MessageText:
//
// A filter condition contains a match type that is not compatible with
the operands.
//
#define
FWP_E_MATCH_TYPE_MISMATCH
_HRESULT_TYPEDEF_(0x80320026L)
//
// MessageId: FWP_E_TYPE_MISMATCH
//
// MessageText:
//
// An FWP_VALUE or FWPM_CONDITION_VALUE is of the wrong type.
//
#define
FWP_E_TYPE_MISMATCH
_HRESULT_TYPEDEF_(0x80320027L)
//
// MessageId: FWP_E_OUT_OF_BOUNDS
//
// MessageText:
//
// An integer value is outside the allowed range.
//
#define
FWP_E_OUT_OF_BOUNDS
_HRESULT_TYPEDEF_(0x80320028L)
//
// MessageId: FWP_E_RESERVED
//
// MessageText:
//
// A reserved field is non-zero.
//
#define
FWP_E_RESERVED
_HRESULT_TYPEDEF_(0x80320029L)
//
// MessageId: FWP_E_DUPLICATE_CONDITION
//
// MessageText:
//
// A filter cannot contain multiple conditions operating on a single
field.
//
#define
FWP_E_DUPLICATE_CONDITION
_HRESULT_TYPEDEF_(0x8032002AL)
//
// MessageId: FWP_E_DUPLICATE_KEYMOD
//
// MessageText:
//
// A policy cannot contain the same keying module more than once.
//
#define
FWP_E_DUPLICATE_KEYMOD
_HRESULT_TYPEDEF_(0x8032002BL)
//
// MessageId: FWP_E_ACTION_INCOMPATIBLE_WITH_LAYER
//
// MessageText:
//
// The action type is not compatible with the layer.
//
#define FWP_E_ACTION_INCOMPATIBLE_WITH_LAYER
_HRESULT_TYPEDEF_(0x8032002CL)
//
// MessageId: FWP_E_ACTION_INCOMPATIBLE_WITH_SUBLAYER
//
// MessageText:
//
// The action type is not compatible with the sublayer.
//
#define FWP_E_ACTION_INCOMPATIBLE_WITH_SUBLAYER
_HRESULT_TYPEDEF_(0x8032002DL)
//
// MessageId: FWP_E_CONTEXT_INCOMPATIBLE_WITH_LAYER
//
// MessageText:
//
// The raw context or the provider context is not compatible with the
layer.
//
#define FWP_E_CONTEXT_INCOMPATIBLE_WITH_LAYER
_HRESULT_TYPEDEF_(0x8032002EL)
//
// MessageId: FWP_E_CONTEXT_INCOMPATIBLE_WITH_CALLOUT
//
// MessageText:
//
// The raw context or the provider context is not compatible with the
callout.
//
#define FWP_E_CONTEXT_INCOMPATIBLE_WITH_CALLOUT
_HRESULT_TYPEDEF_(0x8032002FL)
//
// MessageId: FWP_E_INCOMPATIBLE_AUTH_METHOD
//
// MessageText:
//
// The authentication method is not compatible with the policy type.
//
#define FWP_E_INCOMPATIBLE_AUTH_METHOD
_HRESULT_TYPEDEF_(0x80320030L)
//
// MessageId: FWP_E_INCOMPATIBLE_DH_GROUP
//
// MessageText:
//
// The Diffie-Hellman group is not compatible with the policy type.
//
#define
FWP_E_INCOMPATIBLE_DH_GROUP
_HRESULT_TYPEDEF_(0x80320031L)
//
// MessageId: FWP_E_EM_NOT_SUPPORTED
//
// MessageText:
//
// An IKE policy cannot contain an Extended Mode policy.
//
#define
FWP_E_EM_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80320032L)
//
// MessageId: FWP_E_NEVER_MATCH
//
// MessageText:
//
// The enumeration template or subscription will never match any
objects.
//
#define
FWP_E_NEVER_MATCH
_HRESULT_TYPEDEF_(0x80320033L)
//
// MessageId: FWP_E_PROVIDER_CONTEXT_MISMATCH
//
// MessageText:
//
// The provider context is of the wrong type.
//
#define FWP_E_PROVIDER_CONTEXT_MISMATCH
_HRESULT_TYPEDEF_(0x80320034L)
//
// MessageId: FWP_E_INVALID_PARAMETER
//
// MessageText:
//
// The parameter is incorrect.
//
#define
FWP_E_INVALID_PARAMETER
_HRESULT_TYPEDEF_(0x80320035L)
//
// MessageId: FWP_E_TOO_MANY_SUBLAYERS
//
// MessageText:
//
// The maximum number of sublayers has been reached.
//
#define
FWP_E_TOO_MANY_SUBLAYERS
_HRESULT_TYPEDEF_(0x80320036L)
//
// MessageId: FWP_E_CALLOUT_NOTIFICATION_FAILED
//
// MessageText:
//
// The notification function for a callout returned an error.
//
#define FWP_E_CALLOUT_NOTIFICATION_FAILED _HRESULT_TYPEDEF_(0x80320037L)
//
// MessageId: FWP_E_INVALID_AUTH_TRANSFORM
//
// MessageText:
//
// The IPsec authentication transform is not valid.
//
#define
FWP_E_INVALID_AUTH_TRANSFORM
_HRESULT_TYPEDEF_(0x80320038L)
//
// MessageId: FWP_E_INVALID_CIPHER_TRANSFORM
//
// MessageText:
//
// The IPsec cipher transform is not valid.
//
#define FWP_E_INVALID_CIPHER_TRANSFORM
_HRESULT_TYPEDEF_(0x80320039L)
//
// MessageId: FWP_E_DROP_NOICMP
//
// MessageText:
//
// The packet should be dropped, no ICMP should be sent.
//
#define
FWP_E_DROP_NOICMP
_HRESULT_TYPEDEF_(0x80320104L)
//
// MessageId: FWP_E_INCOMPATIBLE_CIPHER_TRANSFORM
//
// MessageText:
//
// The IPsec cipher transform is not compatible with the policy.
//
#define FWP_E_INCOMPATIBLE_CIPHER_TRANSFORM
_HRESULT_TYPEDEF_(0x8032003AL)
//
// MessageId: FWP_E_INVALID_TRANSFORM_COMBINATION
//
// MessageText:
//
// The combination of IPsec transform types is not valid.
//
#define FWP_E_INVALID_TRANSFORM_COMBINATION
_HRESULT_TYPEDEF_(0x8032003BL)
//
// MessageId: FWP_E_DUPLICATE_AUTH_METHOD
//
// MessageText:
//
// A policy cannot contain the same auth method more than once.
//
#define
FWP_E_DUPLICATE_AUTH_METHOD
_HRESULT_TYPEDEF_(0x8032003CL)
///////////////////////////////////////////////////
//
//
// Web
Services Platform Error
Codes //
//
//
///////////////////////////////////////////////////
//
// MessageId: WS_S_ASYNC
//
// MessageText:
//
// The function call is completing asynchronously.
//
#define
WS_S_ASYNC
_HRESULT_TYPEDEF_(0x003D0000L)
//
// MessageId: WS_S_END
//
// MessageText:
//
// There are no more messages available on the channel.
//
#define
WS_S_END
_HRESULT_TYPEDEF_(0x003D0001L)
//
// MessageId: WS_E_INVALID_FORMAT
//
// MessageText:
//
// The input data was not in the expected format or did not have the
expected value.
//
#define
WS_E_INVALID_FORMAT
_HRESULT_TYPEDEF_(0x803D0000L)
//
// MessageId: WS_E_OBJECT_FAULTED
//
// MessageText:
//
// The operation could not be completed because the object is in a
faulted state due to a previous error.
//
#define
WS_E_OBJECT_FAULTED
_HRESULT_TYPEDEF_(0x803D0001L)
//
// MessageId: WS_E_NUMERIC_OVERFLOW
//
// MessageText:
//
// The operation could not be completed because it would lead to
numeric overflow.
//
#define
WS_E_NUMERIC_OVERFLOW
_HRESULT_TYPEDEF_(0x803D0002L)
//
// MessageId: WS_E_INVALID_OPERATION
//
// MessageText:
//
// The operation is not allowed due to the current state of the object.
//
#define
WS_E_INVALID_OPERATION
_HRESULT_TYPEDEF_(0x803D0003L)
//
// MessageId: WS_E_OPERATION_ABORTED
//
// MessageText:
//
// The operation was aborted.
//
#define
WS_E_OPERATION_ABORTED
_HRESULT_TYPEDEF_(0x803D0004L)
//
// MessageId: WS_E_ENDPOINT_ACCESS_DENIED
//
// MessageText:
//
// Access was denied by the remote endpoint.
//
#define
WS_E_ENDPOINT_ACCESS_DENIED
_HRESULT_TYPEDEF_(0x803D0005L)
//
// MessageId: WS_E_OPERATION_TIMED_OUT
//
// MessageText:
//
// The operation did not complete within the time allotted.
//
#define
WS_E_OPERATION_TIMED_OUT
_HRESULT_TYPEDEF_(0x803D0006L)
//
// MessageId: WS_E_OPERATION_ABANDONED
//
// MessageText:
//
// The operation was abandoned.
//
#define
WS_E_OPERATION_ABANDONED
_HRESULT_TYPEDEF_(0x803D0007L)
//
// MessageId: WS_E_QUOTA_EXCEEDED
//
// MessageText:
//
// A quota was exceeded.
//
#define
WS_E_QUOTA_EXCEEDED
_HRESULT_TYPEDEF_(0x803D0008L)
//
// MessageId: WS_E_NO_TRANSLATION_AVAILABLE
//
// MessageText:
//
// The information was not available in the specified language.
//
#define WS_E_NO_TRANSLATION_AVAILABLE
_HRESULT_TYPEDEF_(0x803D0009L)
//
// MessageId: WS_E_SECURITY_VERIFICATION_FAILURE
//
// MessageText:
//
// Security verification was not successful for the received data.
//
#define WS_E_SECURITY_VERIFICATION_FAILURE
_HRESULT_TYPEDEF_(0x803D000AL)
//
// MessageId: WS_E_ADDRESS_IN_USE
//
// MessageText:
//
// The address is already being used.
//
#define
WS_E_ADDRESS_IN_USE
_HRESULT_TYPEDEF_(0x803D000BL)
//
// MessageId: WS_E_ADDRESS_NOT_AVAILABLE
//
// MessageText:
//
// The address is not valid for this context.
//
#define
WS_E_ADDRESS_NOT_AVAILABLE
_HRESULT_TYPEDEF_(0x803D000CL)
//
// MessageId: WS_E_ENDPOINT_NOT_FOUND
//
// MessageText:
//
// The remote endpoint does not exist or could not be located.
//
#define
WS_E_ENDPOINT_NOT_FOUND
_HRESULT_TYPEDEF_(0x803D000DL)
//
// MessageId: WS_E_ENDPOINT_NOT_AVAILABLE
//
// MessageText:
//
// The remote endpoint is not currently in service at this location.
//
#define
WS_E_ENDPOINT_NOT_AVAILABLE
_HRESULT_TYPEDEF_(0x803D000EL)
//
// MessageId: WS_E_ENDPOINT_FAILURE
//
// MessageText:
//
// The remote endpoint could not process the request.
//
#define
WS_E_ENDPOINT_FAILURE
_HRESULT_TYPEDEF_(0x803D000FL)
//
// MessageId: WS_E_ENDPOINT_UNREACHABLE
//
// MessageText:
//
// The remote endpoint was not reachable.
//
#define
WS_E_ENDPOINT_UNREACHABLE
_HRESULT_TYPEDEF_(0x803D0010L)
//
// MessageId: WS_E_ENDPOINT_ACTION_NOT_SUPPORTED
//
// MessageText:
//
// The operation was not supported by the remote endpoint.
//
#define WS_E_ENDPOINT_ACTION_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x803D0011L)
//
// MessageId: WS_E_ENDPOINT_TOO_BUSY
//
// MessageText:
//
// The remote endpoint is unable to process the request due to being
overloaded.
//
#define
WS_E_ENDPOINT_TOO_BUSY
_HRESULT_TYPEDEF_(0x803D0012L)
//
// MessageId: WS_E_ENDPOINT_FAULT_RECEIVED
//
// MessageText:
//
// A message containing a fault was received from the remote endpoint.
//
#define
WS_E_ENDPOINT_FAULT_RECEIVED
_HRESULT_TYPEDEF_(0x803D0013L)
//
// MessageId: WS_E_ENDPOINT_DISCONNECTED
//
// MessageText:
//
// The connection with the remote endpoint was terminated.
//
#define
WS_E_ENDPOINT_DISCONNECTED
_HRESULT_TYPEDEF_(0x803D0014L)
//
// MessageId: WS_E_PROXY_FAILURE
//
// MessageText:
//
// The HTTP proxy server could not process the request.
//
#define
WS_E_PROXY_FAILURE
_HRESULT_TYPEDEF_(0x803D0015L)
//
// MessageId: WS_E_PROXY_ACCESS_DENIED
//
// MessageText:
//
// Access was denied by the HTTP proxy server.
//
#define
WS_E_PROXY_ACCESS_DENIED
_HRESULT_TYPEDEF_(0x803D0016L)
//
// MessageId: WS_E_NOT_SUPPORTED
//
// MessageText:
//
// The requested feature is not available on this platform.
//
#define
WS_E_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x803D0017L)
//
// MessageId: WS_E_PROXY_REQUIRES_BASIC_AUTH
//
// MessageText:
//
// The HTTP proxy server requires HTTP authentication scheme 'basic'.
//
#define WS_E_PROXY_REQUIRES_BASIC_AUTH
_HRESULT_TYPEDEF_(0x803D0018L)
//
// MessageId: WS_E_PROXY_REQUIRES_DIGEST_AUTH
//
// MessageText:
//
// The HTTP proxy server requires HTTP authentication scheme 'digest'.
//
#define WS_E_PROXY_REQUIRES_DIGEST_AUTH
_HRESULT_TYPEDEF_(0x803D0019L)
//
// MessageId: WS_E_PROXY_REQUIRES_NTLM_AUTH
//
// MessageText:
//
// The HTTP proxy server requires HTTP authentication scheme 'NTLM'.
//
#define WS_E_PROXY_REQUIRES_NTLM_AUTH
_HRESULT_TYPEDEF_(0x803D001AL)
//
// MessageId: WS_E_PROXY_REQUIRES_NEGOTIATE_AUTH
//
// MessageText:
//
// The HTTP proxy server requires HTTP authentication scheme
'negotiate'.
//
#define WS_E_PROXY_REQUIRES_NEGOTIATE_AUTH
_HRESULT_TYPEDEF_(0x803D001BL)
//
// MessageId: WS_E_SERVER_REQUIRES_BASIC_AUTH
//
// MessageText:
//
// The remote endpoint requires HTTP authentication scheme 'basic'.
//
#define WS_E_SERVER_REQUIRES_BASIC_AUTH
_HRESULT_TYPEDEF_(0x803D001CL)
//
// MessageId: WS_E_SERVER_REQUIRES_DIGEST_AUTH
//
// MessageText:
//
// The remote endpoint requires HTTP authentication scheme 'digest'.
//
#define WS_E_SERVER_REQUIRES_DIGEST_AUTH _HRESULT_TYPEDEF_(0x803D001DL)
//
// MessageId: WS_E_SERVER_REQUIRES_NTLM_AUTH
//
// MessageText:
//
// The remote endpoint requires HTTP authentication scheme 'NTLM'.
//
#define WS_E_SERVER_REQUIRES_NTLM_AUTH
_HRESULT_TYPEDEF_(0x803D001EL)
//
// MessageId: WS_E_SERVER_REQUIRES_NEGOTIATE_AUTH
//
// MessageText:
//
// The remote endpoint requires HTTP authentication scheme 'negotiate'.
//
#define WS_E_SERVER_REQUIRES_NEGOTIATE_AUTH
_HRESULT_TYPEDEF_(0x803D001FL)
//
// MessageId: WS_E_INVALID_ENDPOINT_URL
//
// MessageText:
//
// The endpoint address URL is invalid.
//
#define
WS_E_INVALID_ENDPOINT_URL
_HRESULT_TYPEDEF_(0x803D0020L)
//
// MessageId: WS_E_OTHER
//
// MessageText:
//
// Unrecognized error occured in the Windows Web Services framework.
//
#define
WS_E_OTHER
_HRESULT_TYPEDEF_(0x803D0021L)
//
// MessageId: WS_E_SECURITY_TOKEN_EXPIRED
//
// MessageText:
//
// A security token was rejected by the server because it has expired.
//
#define
WS_E_SECURITY_TOKEN_EXPIRED
_HRESULT_TYPEDEF_(0x803D0022L)
//
// MessageId: WS_E_SECURITY_SYSTEM_FAILURE
//
// MessageText:
//
// A security operation failed in the Windows Web Services framework.
//
#define
WS_E_SECURITY_SYSTEM_FAILURE
_HRESULT_TYPEDEF_(0x803D0023L)
//
// NDIS error codes (ndis.sys)
//
#ifdef RC_INVOKED
#define _NDIS_ERROR_TYPEDEF_(_sc) _sc
#else // RC_INVOKED
#define _NDIS_ERROR_TYPEDEF_(_sc) (DWORD)(_sc)
#endif // RC_INVOKED
//
// MessageId: ERROR_NDIS_INTERFACE_CLOSING
//
// MessageText:
//
// The binding to the network interface is being closed.
//
#define
ERROR_NDIS_INTERFACE_CLOSING
_NDIS_ERROR_TYPEDEF_(0x80340002L)
//
// MessageId: ERROR_NDIS_BAD_VERSION
//
// MessageText:
//
// An invalid version was specified.
//
#define
ERROR_NDIS_BAD_VERSION
_NDIS_ERROR_TYPEDEF_(0x80340004L)
//
// MessageId: ERROR_NDIS_BAD_CHARACTERISTICS
//
// MessageText:
//
// An invalid characteristics table was used.
//
#define ERROR_NDIS_BAD_CHARACTERISTICS
_NDIS_ERROR_TYPEDEF_(0x80340005L)
//
// MessageId: ERROR_NDIS_ADAPTER_NOT_FOUND
//
// MessageText:
//
// Failed to find the network interface or network interface is not
ready.
//
#define
ERROR_NDIS_ADAPTER_NOT_FOUND
_NDIS_ERROR_TYPEDEF_(0x80340006L)
//
// MessageId: ERROR_NDIS_OPEN_FAILED
//
// MessageText:
//
// Failed to open the network interface.
//
#define
ERROR_NDIS_OPEN_FAILED
_NDIS_ERROR_TYPEDEF_(0x80340007L)
//
// MessageId: ERROR_NDIS_DEVICE_FAILED
//
// MessageText:
//
// Network interface has encountered an internal unrecoverable failure.
//
#define
ERROR_NDIS_DEVICE_FAILED
_NDIS_ERROR_TYPEDEF_(0x80340008L)
//
// MessageId: ERROR_NDIS_MULTICAST_FULL
//
// MessageText:
//
// The multicast list on the network interface is full.
//
#define
ERROR_NDIS_MULTICAST_FULL
_NDIS_ERROR_TYPEDEF_(0x80340009L)
//
// MessageId: ERROR_NDIS_MULTICAST_EXISTS
//
// MessageText:
//
// An attempt was made to add a duplicate multicast address to the list.
//
#define
ERROR_NDIS_MULTICAST_EXISTS
_NDIS_ERROR_TYPEDEF_(0x8034000AL)
//
// MessageId: ERROR_NDIS_MULTICAST_NOT_FOUND
//
// MessageText:
//
// At attempt was made to remove a multicast address that was never
added.
//
#define ERROR_NDIS_MULTICAST_NOT_FOUND
_NDIS_ERROR_TYPEDEF_(0x8034000BL)
//
// MessageId: ERROR_NDIS_REQUEST_ABORTED
//
// MessageText:
//
// Netowork interface aborted the request.
//
#define
ERROR_NDIS_REQUEST_ABORTED
_NDIS_ERROR_TYPEDEF_(0x8034000CL)
//
// MessageId: ERROR_NDIS_RESET_IN_PROGRESS
//
// MessageText:
//
// Network interface can not process the request because it is being
reset.
//
#define
ERROR_NDIS_RESET_IN_PROGRESS
_NDIS_ERROR_TYPEDEF_(0x8034000DL)
//
// MessageId: ERROR_NDIS_NOT_SUPPORTED
//
// MessageText:
//
// Netword interface does not support this request.
//
#define
ERROR_NDIS_NOT_SUPPORTED
_NDIS_ERROR_TYPEDEF_(0x803400BBL)
//
// MessageId: ERROR_NDIS_INVALID_PACKET
//
// MessageText:
//
// An attempt was made to send an invalid packet on a network interface.
//
#define
ERROR_NDIS_INVALID_PACKET
_NDIS_ERROR_TYPEDEF_(0x8034000FL)
//
// MessageId: ERROR_NDIS_ADAPTER_NOT_READY
//
// MessageText:
//
// Network interface is not ready to complete this operation.
//
#define
ERROR_NDIS_ADAPTER_NOT_READY
_NDIS_ERROR_TYPEDEF_(0x80340011L)
//
// MessageId: ERROR_NDIS_INVALID_LENGTH
//
// MessageText:
//
// The length of the buffer submitted for this operation is not valid.
//
#define
ERROR_NDIS_INVALID_LENGTH
_NDIS_ERROR_TYPEDEF_(0x80340014L)
//
// MessageId: ERROR_NDIS_INVALID_DATA
//
// MessageText:
//
// The data used for this operation is not valid.
//
#define
ERROR_NDIS_INVALID_DATA
_NDIS_ERROR_TYPEDEF_(0x80340015L)
//
// MessageId: ERROR_NDIS_BUFFER_TOO_SHORT
//
// MessageText:
//
// The length of buffer submitted for this operation is too small.
//
#define
ERROR_NDIS_BUFFER_TOO_SHORT
_NDIS_ERROR_TYPEDEF_(0x80340016L)
//
// MessageId: ERROR_NDIS_INVALID_OID
//
// MessageText:
//
// Network interface does not support this OID (Object Identifier)
//
#define
ERROR_NDIS_INVALID_OID
_NDIS_ERROR_TYPEDEF_(0x80340017L)
//
// MessageId: ERROR_NDIS_ADAPTER_REMOVED
//
// MessageText:
//
// The network interface has been removed.
//
#define
ERROR_NDIS_ADAPTER_REMOVED
_NDIS_ERROR_TYPEDEF_(0x80340018L)
//
// MessageId: ERROR_NDIS_UNSUPPORTED_MEDIA
//
// MessageText:
//
// Network interface does not support this media type.
//
#define
ERROR_NDIS_UNSUPPORTED_MEDIA
_NDIS_ERROR_TYPEDEF_(0x80340019L)
//
// MessageId: ERROR_NDIS_GROUP_ADDRESS_IN_USE
//
// MessageText:
//
// An attempt was made to remove a token ring group address that is in
use by other components.
//
#define ERROR_NDIS_GROUP_ADDRESS_IN_USE
_NDIS_ERROR_TYPEDEF_(0x8034001AL)
//
// MessageId: ERROR_NDIS_FILE_NOT_FOUND
//
// MessageText:
//
// An attempt was made to map a file that can not be found.
//
#define
ERROR_NDIS_FILE_NOT_FOUND
_NDIS_ERROR_TYPEDEF_(0x8034001BL)
//
// MessageId: ERROR_NDIS_ERROR_READING_FILE
//
// MessageText:
//
// An error occured while NDIS tried to map the file.
//
#define ERROR_NDIS_ERROR_READING_FILE
_NDIS_ERROR_TYPEDEF_(0x8034001CL)
//
// MessageId: ERROR_NDIS_ALREADY_MAPPED
//
// MessageText:
//
// An attempt was made to map a file that is alreay mapped.
//
#define
ERROR_NDIS_ALREADY_MAPPED
_NDIS_ERROR_TYPEDEF_(0x8034001DL)
//
// MessageId: ERROR_NDIS_RESOURCE_CONFLICT
//
// MessageText:
//
// An attempt to allocate a hardware resource failed because the
resource is used by another component.
//
#define
ERROR_NDIS_RESOURCE_CONFLICT
_NDIS_ERROR_TYPEDEF_(0x8034001EL)
//
// MessageId: ERROR_NDIS_MEDIA_DISCONNECTED
//
// MessageText:
//
// The I/O operation failed because network media is disconnected or
wireless access point is out of range.
//
#define ERROR_NDIS_MEDIA_DISCONNECTED
_NDIS_ERROR_TYPEDEF_(0x8034001FL)
//
// MessageId: ERROR_NDIS_INVALID_ADDRESS
//
// MessageText:
//
// The network address used in the request is invalid.
//
#define
ERROR_NDIS_INVALID_ADDRESS
_NDIS_ERROR_TYPEDEF_(0x80340022L)
//
// MessageId: ERROR_NDIS_INVALID_DEVICE_REQUEST
//
// MessageText:
//
// The specified request is not a valid operation for the target device.
//
#define ERROR_NDIS_INVALID_DEVICE_REQUEST
_NDIS_ERROR_TYPEDEF_(0x80340010L)
//
// MessageId: ERROR_NDIS_PAUSED
//
// MessageText:
//
// The offload operation on the network interface has been paused.
//
#define
ERROR_NDIS_PAUSED
_NDIS_ERROR_TYPEDEF_(0x8034002AL)
//
// MessageId: ERROR_NDIS_INTERFACE_NOT_FOUND
//
// MessageText:
//
// Network interface was not found.
//
#define ERROR_NDIS_INTERFACE_NOT_FOUND
_NDIS_ERROR_TYPEDEF_(0x8034002BL)
//
// MessageId: ERROR_NDIS_UNSUPPORTED_REVISION
//
// MessageText:
//
// The revision number specified in the structure is not supported.
//
#define ERROR_NDIS_UNSUPPORTED_REVISION
_NDIS_ERROR_TYPEDEF_(0x8034002CL)
//
// MessageId: ERROR_NDIS_INVALID_PORT
//
// MessageText:
//
// The specified port does not exist on this network interface.
//
#define
ERROR_NDIS_INVALID_PORT
_NDIS_ERROR_TYPEDEF_(0x8034002DL)
//
// MessageId: ERROR_NDIS_INVALID_PORT_STATE
//
// MessageText:
//
// The current state of the specified port on this network interface
does not support the requested operation.
//
#define ERROR_NDIS_INVALID_PORT_STATE
_NDIS_ERROR_TYPEDEF_(0x8034002EL)
//
// MessageId: ERROR_NDIS_LOW_POWER_STATE
//
// MessageText:
//
// The miniport adapter is in low power state.
//
#define
ERROR_NDIS_LOW_POWER_STATE
_NDIS_ERROR_TYPEDEF_(0x8034002FL)
//
// NDIS error codes (802.11 wireless LAN)
//
//
// MessageId: ERROR_NDIS_DOT11_AUTO_CONFIG_ENABLED
//
// MessageText:
//
//
The wireless local area network interface is in auto configuration mode
and doesn't support the requested parameter change operation.
//
#define ERROR_NDIS_DOT11_AUTO_CONFIG_ENABLED
_NDIS_ERROR_TYPEDEF_(0x80342000L)
//
// MessageId: ERROR_NDIS_DOT11_MEDIA_IN_USE
//
// MessageText:
//
// The wireless local area network interface is busy and can not
perform the requested operation.
//
#define ERROR_NDIS_DOT11_MEDIA_IN_USE
_NDIS_ERROR_TYPEDEF_(0x80342001L)
//
// MessageId: ERROR_NDIS_DOT11_POWER_STATE_INVALID
//
// MessageText:
//
// The wireless local area network interface is power down and doesn't
support the requested operation.
//
#define ERROR_NDIS_DOT11_POWER_STATE_INVALID
_NDIS_ERROR_TYPEDEF_(0x80342002L)
//
// MessageId: ERROR_NDIS_PM_WOL_PATTERN_LIST_FULL
//
// MessageText:
//
// The list of wake on LAN patterns is full.
//
#define ERROR_NDIS_PM_WOL_PATTERN_LIST_FULL
_NDIS_ERROR_TYPEDEF_(0x80342003L)
//
// MessageId: ERROR_NDIS_PM_PROTOCOL_OFFLOAD_LIST_FULL
//
// MessageText:
//
// The list of low power protocol offloads is full.
//
#define ERROR_NDIS_PM_PROTOCOL_OFFLOAD_LIST_FULL
_NDIS_ERROR_TYPEDEF_(0x80342004L)
//
// NDIS informational code (ndis.sys)
//
//
// MessageId: ERROR_NDIS_INDICATION_REQUIRED
//
// MessageText:
//
// The request will be completed later by NDIS status indication.
//
#define ERROR_NDIS_INDICATION_REQUIRED
_NDIS_ERROR_TYPEDEF_(0x00340001L)
//
// NDIS Chimney Offload codes (ndis.sys)
//
//
// MessageId: ERROR_NDIS_OFFLOAD_POLICY
//
// MessageText:
//
// The TCP connection is not offloadable because of a local policy
setting.
//
#define
ERROR_NDIS_OFFLOAD_POLICY
_NDIS_ERROR_TYPEDEF_(0xC034100FL)
//
// MessageId: ERROR_NDIS_OFFLOAD_CONNECTION_REJECTED
//
// MessageText:
//
// The TCP connection is not offloadable by the Chimney Offload target.
//
#define ERROR_NDIS_OFFLOAD_CONNECTION_REJECTED
_NDIS_ERROR_TYPEDEF_(0xC0341012L)
//
// MessageId: ERROR_NDIS_OFFLOAD_PATH_REJECTED
//
// MessageText:
//
// The IP Path object is not in an offloadable state.
//
#define ERROR_NDIS_OFFLOAD_PATH_REJECTED
_NDIS_ERROR_TYPEDEF_(0xC0341013L)
//
// Hypervisor error codes
//
//
// MessageId: ERROR_HV_INVALID_HYPERCALL_CODE
//
// MessageText:
//
// The hypervisor does not support the operation because the specified
hypercall code is not supported.
//
#define ERROR_HV_INVALID_HYPERCALL_CODE
_NDIS_ERROR_TYPEDEF_(0xC0350002L)
//
// MessageId: ERROR_HV_INVALID_HYPERCALL_INPUT
//
// MessageText:
//
// The hypervisor does not support the operation because the encoding
for the hypercall input register is not supported.
//
#define ERROR_HV_INVALID_HYPERCALL_INPUT
_NDIS_ERROR_TYPEDEF_(0xC0350003L)
//
// MessageId: ERROR_HV_INVALID_ALIGNMENT
//
// MessageText:
//
// The hypervisor could not perform the operation beacuse a parameter
has an invalid alignment.
//
#define
ERROR_HV_INVALID_ALIGNMENT
_NDIS_ERROR_TYPEDEF_(0xC0350004L)
//
// MessageId: ERROR_HV_INVALID_PARAMETER
//
// MessageText:
//
// The hypervisor could not perform the operation beacuse an invalid
parameter was specified.
//
#define
ERROR_HV_INVALID_PARAMETER
_NDIS_ERROR_TYPEDEF_(0xC0350005L)
//
// MessageId: ERROR_HV_ACCESS_DENIED
//
// MessageText:
//
// Access to the specified object was denied.
//
#define
ERROR_HV_ACCESS_DENIED
_NDIS_ERROR_TYPEDEF_(0xC0350006L)
//
// MessageId: ERROR_HV_INVALID_PARTITION_STATE
//
// MessageText:
//
// The hypervisor could not perform the operation because the partition
is entering or in an invalid state.
//
#define ERROR_HV_INVALID_PARTITION_STATE
_NDIS_ERROR_TYPEDEF_(0xC0350007L)
//
// MessageId: ERROR_HV_OPERATION_DENIED
//
// MessageText:
//
// The operation is not allowed in the current state.
//
#define
ERROR_HV_OPERATION_DENIED
_NDIS_ERROR_TYPEDEF_(0xC0350008L)
//
// MessageId: ERROR_HV_UNKNOWN_PROPERTY
//
// MessageText:
//
// The hypervisor does not recognize the specified partition property.
//
#define
ERROR_HV_UNKNOWN_PROPERTY
_NDIS_ERROR_TYPEDEF_(0xC0350009L)
//
// MessageId: ERROR_HV_PROPERTY_VALUE_OUT_OF_RANGE
//
// MessageText:
//
// The specified value of a partition property is out of range or
violates an invariant.
//
#define ERROR_HV_PROPERTY_VALUE_OUT_OF_RANGE
_NDIS_ERROR_TYPEDEF_(0xC035000AL)
//
// MessageId: ERROR_HV_INSUFFICIENT_MEMORY
//
// MessageText:
//
// There is not enough memory in the hypervisor pool to complete the
operation.
//
#define
ERROR_HV_INSUFFICIENT_MEMORY
_NDIS_ERROR_TYPEDEF_(0xC035000BL)
//
// MessageId: ERROR_HV_PARTITION_TOO_DEEP
//
// MessageText:
//
// The maximum partition depth has been exceeded for the partition
hierarchy.
//
#define
ERROR_HV_PARTITION_TOO_DEEP
_NDIS_ERROR_TYPEDEF_(0xC035000CL)
//
// MessageId: ERROR_HV_INVALID_PARTITION_ID
//
// MessageText:
//
// A partition with the specified partition Id does not exist.
//
#define ERROR_HV_INVALID_PARTITION_ID
_NDIS_ERROR_TYPEDEF_(0xC035000DL)
//
// MessageId: ERROR_HV_INVALID_VP_INDEX
//
// MessageText:
//
// The hypervisor could not perform the operation because the specified
VP index is invalid.
//
#define
ERROR_HV_INVALID_VP_INDEX
_NDIS_ERROR_TYPEDEF_(0xC035000EL)
//
// MessageId: ERROR_HV_INVALID_PORT_ID
//
// MessageText:
//
// The hypervisor could not perform the operation because the specified
port identifier is invalid.
//
#define
ERROR_HV_INVALID_PORT_ID
_NDIS_ERROR_TYPEDEF_(0xC0350011L)
//
// MessageId: ERROR_HV_INVALID_CONNECTION_ID
//
// MessageText:
//
// The hypervisor could not perform the operation because the specified
connection identifier is invalid.
//
#define ERROR_HV_INVALID_CONNECTION_ID
_NDIS_ERROR_TYPEDEF_(0xC0350012L)
//
// MessageId: ERROR_HV_INSUFFICIENT_BUFFERS
//
// MessageText:
//
// Not enough buffers were supplied to send a message.
//
#define ERROR_HV_INSUFFICIENT_BUFFERS
_NDIS_ERROR_TYPEDEF_(0xC0350013L)
//
// MessageId: ERROR_HV_NOT_ACKNOWLEDGED
//
// MessageText:
//
// The previous virtual interrupt has not been acknowledged.
//
#define
ERROR_HV_NOT_ACKNOWLEDGED
_NDIS_ERROR_TYPEDEF_(0xC0350014L)
//
// MessageId: ERROR_HV_ACKNOWLEDGED
//
// MessageText:
//
// The previous virtual interrupt has already been acknowledged.
//
#define
ERROR_HV_ACKNOWLEDGED
_NDIS_ERROR_TYPEDEF_(0xC0350016L)
//
// MessageId: ERROR_HV_INVALID_SAVE_RESTORE_STATE
//
// MessageText:
//
// The indicated partition is not in a valid state for saving or
restoring.
//
#define ERROR_HV_INVALID_SAVE_RESTORE_STATE
_NDIS_ERROR_TYPEDEF_(0xC0350017L)
//
// MessageId: ERROR_HV_INVALID_SYNIC_STATE
//
// MessageText:
//
//
The hypervisor could not complete the operation because a required
feature of the synthetic interrupt controller (SynIC) was disabled.
//
#define
ERROR_HV_INVALID_SYNIC_STATE
_NDIS_ERROR_TYPEDEF_(0xC0350018L)
//
// MessageId: ERROR_HV_OBJECT_IN_USE
//
// MessageText:
//
//
The hypervisor could not perform the operation because the object or
value was either already in use or being used for a purpose that would
not permit completing the operation.
//
#define
ERROR_HV_OBJECT_IN_USE
_NDIS_ERROR_TYPEDEF_(0xC0350019L)
//
// MessageId: ERROR_HV_INVALID_PROXIMITY_DOMAIN_INFO
//
// MessageText:
//
// The proximity domain information is invalid.
//
#define ERROR_HV_INVALID_PROXIMITY_DOMAIN_INFO
_NDIS_ERROR_TYPEDEF_(0xC035001AL)
//
// MessageId: ERROR_HV_NO_DATA
//
// MessageText:
//
// An attempt to retrieve debugging data failed because none was
available.
//
#define
ERROR_HV_NO_DATA
_NDIS_ERROR_TYPEDEF_(0xC035001BL)
//
// MessageId: ERROR_HV_INACTIVE
//
// MessageText:
//
// The physical connection being used for debuggging has not recorded
any receive activity since the last operation.
//
#define
ERROR_HV_INACTIVE
_NDIS_ERROR_TYPEDEF_(0xC035001CL)
//
// MessageId: ERROR_HV_NO_RESOURCES
//
// MessageText:
//
// There are not enough resources to complete the operation.
//
#define
ERROR_HV_NO_RESOURCES
_NDIS_ERROR_TYPEDEF_(0xC035001DL)
//
// MessageId: ERROR_HV_FEATURE_UNAVAILABLE
//
// MessageText:
//
// A hypervisor feature is not available to the user.
//
#define
ERROR_HV_FEATURE_UNAVAILABLE
_NDIS_ERROR_TYPEDEF_(0xC035001EL)
//
// MessageId: ERROR_HV_NOT_PRESENT
//
// MessageText:
//
// No hypervisor is present on this system.
//
#define
ERROR_HV_NOT_PRESENT
_NDIS_ERROR_TYPEDEF_(0xC0351000L)
//
// Virtualization error codes - these codes are used by the
Virtualization Infrustructure Driver (VID) and other components
//
of the virtualization stack.
//
// Errors:
//
//
// MessageId: ERROR_VID_DUPLICATE_HANDLER
//
// MessageText:
//
//
The handler for the virtualization infrastructure driver is already
registered. Restarting the virtual machine may fix the problem. If the
problem persists, try restarting the physical computer.
//
#define
ERROR_VID_DUPLICATE_HANDLER
_NDIS_ERROR_TYPEDEF_(0xC0370001L)
//
// MessageId: ERROR_VID_TOO_MANY_HANDLERS
//
// MessageText:
//
//
The number of registered handlers for the virtualization infrastructure
driver exceeded the maximum. Restarting the virtual machine may fix the
problem. If the problem persists, try restarting the physical computer.
//
#define
ERROR_VID_TOO_MANY_HANDLERS
_NDIS_ERROR_TYPEDEF_(0xC0370002L)
//
// MessageId: ERROR_VID_QUEUE_FULL
//
// MessageText:
//
//
The message queue for the virtualization infrastructure driver is full
and cannot accept new messages. Restarting the virtual machine may fix
the problem. If the problem persists, try restarting the physical
computer.
//
#define
ERROR_VID_QUEUE_FULL
_NDIS_ERROR_TYPEDEF_(0xC0370003L)
//
// MessageId: ERROR_VID_HANDLER_NOT_PRESENT
//
// MessageText:
//
//
No handler exists to handle the message for the virtualization
infrastructure driver. Restarting the virtual machine may fix the
problem. If the problem persists, try restarting the physical computer.
//
#define ERROR_VID_HANDLER_NOT_PRESENT
_NDIS_ERROR_TYPEDEF_(0xC0370004L)
//
// MessageId: ERROR_VID_INVALID_OBJECT_NAME
//
// MessageText:
//
//
The name of the partition or message queue for the virtualization
infrastructure driver is invalid. Restarting the virtual machine may
fix the problem. If the problem persists, try restarting the physical
computer.
//
#define ERROR_VID_INVALID_OBJECT_NAME
_NDIS_ERROR_TYPEDEF_(0xC0370005L)
//
// MessageId: ERROR_VID_PARTITION_NAME_TOO_LONG
//
// MessageText:
//
// The partition name of the virtualization infrastructure driver
exceeds the maximum.
//
#define ERROR_VID_PARTITION_NAME_TOO_LONG
_NDIS_ERROR_TYPEDEF_(0xC0370006L)
//
// MessageId: ERROR_VID_MESSAGE_QUEUE_NAME_TOO_LONG
//
// MessageText:
//
// The message queue name of the virtualization infrastructure driver
exceeds the maximum.
//
#define ERROR_VID_MESSAGE_QUEUE_NAME_TOO_LONG
_NDIS_ERROR_TYPEDEF_(0xC0370007L)
//
// MessageId: ERROR_VID_PARTITION_ALREADY_EXISTS
//
// MessageText:
//
//
Cannot create the partition for the virtualization infrastructure
driver because another partition with the same name already exists.
//
#define ERROR_VID_PARTITION_ALREADY_EXISTS
_NDIS_ERROR_TYPEDEF_(0xC0370008L)
//
// MessageId: ERROR_VID_PARTITION_DOES_NOT_EXIST
//
// MessageText:
//
//
The virtualization infrastructure driver has encountered an error. The
requested partition does not exist. Restarting the virtual machine may
fix the problem. If the problem persists, try restarting the physical
computer.
//
#define ERROR_VID_PARTITION_DOES_NOT_EXIST
_NDIS_ERROR_TYPEDEF_(0xC0370009L)
//
// MessageId: ERROR_VID_PARTITION_NAME_NOT_FOUND
//
// MessageText:
//
//
The virtualization infrastructure driver has encountered an error.
Could not find the requested partition. Restarting the virtual machine
may fix the problem. If the problem persists, try restarting the
physical computer.
//
#define ERROR_VID_PARTITION_NAME_NOT_FOUND
_NDIS_ERROR_TYPEDEF_(0xC037000AL)
//
// MessageId: ERROR_VID_MESSAGE_QUEUE_ALREADY_EXISTS
//
// MessageText:
//
// A message queue with the same name already exists for the
virtualization infrastructure driver.
//
#define ERROR_VID_MESSAGE_QUEUE_ALREADY_EXISTS
_NDIS_ERROR_TYPEDEF_(0xC037000BL)
//
// MessageId: ERROR_VID_EXCEEDED_MBP_ENTRY_MAP_LIMIT
//
// MessageText:
//
//
The memory block page for the virtualization infrastructure driver
cannot be mapped because the page map limit has been reached.
Restarting the virtual machine may fix the problem. If the problem
persists, try restarting the physical computer.
//
#define ERROR_VID_EXCEEDED_MBP_ENTRY_MAP_LIMIT
_NDIS_ERROR_TYPEDEF_(0xC037000CL)
//
// MessageId: ERROR_VID_MB_STILL_REFERENCED
//
// MessageText:
//
// The memory block for the virtualization infrastructure driver is
still being used and cannot be destroyed.
//
#define ERROR_VID_MB_STILL_REFERENCED
_NDIS_ERROR_TYPEDEF_(0xC037000DL)
//
// MessageId: ERROR_VID_CHILD_GPA_PAGE_SET_CORRUPTED
//
// MessageText:
//
//
Cannot unlock the page array for the guest operating system memory
address because it does not match a previous lock request. Restarting
the virtual machine may fix the problem. If the problem persists, try
restarting the physical computer.
//
#define ERROR_VID_CHILD_GPA_PAGE_SET_CORRUPTED
_NDIS_ERROR_TYPEDEF_(0xC037000EL)
//
// MessageId: ERROR_VID_INVALID_NUMA_SETTINGS
//
// MessageText:
//
//
The non-uniform memory access (NUMA) node settings do not match the
system NUMA topology. In order to start the virtual machine, you will
need to modify the NUMA configuration. For detailed information, see
http://go.microsoft.com/fwlink/?LinkId=92362.
//
#define ERROR_VID_INVALID_NUMA_SETTINGS
_NDIS_ERROR_TYPEDEF_(0xC037000FL)
//
// MessageId: ERROR_VID_INVALID_NUMA_NODE_INDEX
//
// MessageText:
//
// The non-uniform memory access (NUMA) node index does not match a
valid index in the system NUMA topology.
//
#define ERROR_VID_INVALID_NUMA_NODE_INDEX
_NDIS_ERROR_TYPEDEF_(0xC0370010L)
//
// MessageId: ERROR_VID_NOTIFICATION_QUEUE_ALREADY_ASSOCIATED
//
// MessageText:
//
// The memory block for the virtualization infrastructure driver is
already associated with a message queue.
//
#define ERROR_VID_NOTIFICATION_QUEUE_ALREADY_ASSOCIATED
_NDIS_ERROR_TYPEDEF_(0xC0370011L)
//
// MessageId: ERROR_VID_INVALID_MEMORY_BLOCK_HANDLE
//
// MessageText:
//
// The handle is not a valid memory block handle for the virtualization
infrastructure driver.
//
#define ERROR_VID_INVALID_MEMORY_BLOCK_HANDLE
_NDIS_ERROR_TYPEDEF_(0xC0370012L)
//
// MessageId: ERROR_VID_PAGE_RANGE_OVERFLOW
//
// MessageText:
//
//
The request exceeded the memory block page limit for the virtualization
infrastructure driver. Restarting the virtual machine may fix the
problem. If the problem persists, try restarting the physical computer.
//
#define ERROR_VID_PAGE_RANGE_OVERFLOW
_NDIS_ERROR_TYPEDEF_(0xC0370013L)
//
// MessageId: ERROR_VID_INVALID_MESSAGE_QUEUE_HANDLE
//
// MessageText:
//
// The handle is not a valid message queue handle for the
virtualization infrastructure driver.
//
#define ERROR_VID_INVALID_MESSAGE_QUEUE_HANDLE
_NDIS_ERROR_TYPEDEF_(0xC0370014L)
//
// MessageId: ERROR_VID_INVALID_GPA_RANGE_HANDLE
//
// MessageText:
//
// The handle is not a valid page range handle for the virtualization
infrastructure driver.
//
#define ERROR_VID_INVALID_GPA_RANGE_HANDLE
_NDIS_ERROR_TYPEDEF_(0xC0370015L)
//
// MessageId: ERROR_VID_NO_MEMORY_BLOCK_NOTIFICATION_QUEUE
//
// MessageText:
//
//
Cannot install client notifications because no message queue for the
virtualization infrastructure driver is associated with the memory
block.
//
#define ERROR_VID_NO_MEMORY_BLOCK_NOTIFICATION_QUEUE
_NDIS_ERROR_TYPEDEF_(0xC0370016L)
//
// MessageId: ERROR_VID_MEMORY_BLOCK_LOCK_COUNT_EXCEEDED
//
// MessageText:
//
//
The request to lock or map a memory block page failed because the
virtualization infrastructure driver memory block limit has been
reached. Restarting the virtual machine may fix the problem. If the
problem persists, try restarting the physical computer.
//
#define ERROR_VID_MEMORY_BLOCK_LOCK_COUNT_EXCEEDED
_NDIS_ERROR_TYPEDEF_(0xC0370017L)
//
// MessageId: ERROR_VID_INVALID_PPM_HANDLE
//
// MessageText:
//
// The handle is not a valid parent partition mapping handle for the
virtualization infrastructure driver.
//
#define
ERROR_VID_INVALID_PPM_HANDLE
_NDIS_ERROR_TYPEDEF_(0xC0370018L)
//
// MessageId: ERROR_VID_MBPS_ARE_LOCKED
//
// MessageText:
//
// Notifications cannot be created on the memory block because it is
use.
//
#define
ERROR_VID_MBPS_ARE_LOCKED
_NDIS_ERROR_TYPEDEF_(0xC0370019L)
//
// MessageId: ERROR_VID_MESSAGE_QUEUE_CLOSED
//
// MessageText:
//
//
The message queue for the virtualization infrastructure driver has been
closed. Restarting the virtual machine may fix the problem. If the
problem persists, try restarting the physical computer.
//
#define ERROR_VID_MESSAGE_QUEUE_CLOSED
_NDIS_ERROR_TYPEDEF_(0xC037001AL)
//
// MessageId: ERROR_VID_VIRTUAL_PROCESSOR_LIMIT_EXCEEDED
//
// MessageText:
//
// Cannot add a virtual processor to the partition because the maximum
has been reached.
//
#define ERROR_VID_VIRTUAL_PROCESSOR_LIMIT_EXCEEDED
_NDIS_ERROR_TYPEDEF_(0xC037001BL)
//
// MessageId: ERROR_VID_STOP_PENDING
//
// MessageText:
//
// Cannot stop the virtual processor immediately because of a pending
intercept.
//
#define
ERROR_VID_STOP_PENDING
_NDIS_ERROR_TYPEDEF_(0xC037001CL)
//
// MessageId: ERROR_VID_INVALID_PROCESSOR_STATE
//
// MessageText:
//
//
Invalid state for the virtual processor. Restarting the virtual machine
may fix the problem. If the problem persists, try restarting the
physical computer.
//
#define ERROR_VID_INVALID_PROCESSOR_STATE
_NDIS_ERROR_TYPEDEF_(0xC037001DL)
//
// MessageId: ERROR_VID_EXCEEDED_KM_CONTEXT_COUNT_LIMIT
//
// MessageText:
//
//
The maximum number of kernel mode clients for the virtualization
infrastructure driver has been reached. Restarting the virtual machine
may fix the problem. If the problem persists, try restarting the
physical computer.
//
#define ERROR_VID_EXCEEDED_KM_CONTEXT_COUNT_LIMIT
_NDIS_ERROR_TYPEDEF_(0xC037001EL)
//
// MessageId: ERROR_VID_KM_INTERFACE_ALREADY_INITIALIZED
//
// MessageText:
//
//
This kernel mode interface for the virtualization infrastructure driver
has already been initialized. Restarting the virtual machine may fix
the problem. If the problem persists, try restarting the physical
computer.
//
#define ERROR_VID_KM_INTERFACE_ALREADY_INITIALIZED
_NDIS_ERROR_TYPEDEF_(0xC037001FL)
//
// MessageId: ERROR_VID_MB_PROPERTY_ALREADY_SET_RESET
//
// MessageText:
//
//
Cannot set or reset the memory block property more than once for the
virtualization infrastructure driver. Restarting the virtual machine
may fix the problem. If the problem persists, try restarting the
physical computer.
//
#define ERROR_VID_MB_PROPERTY_ALREADY_SET_RESET
_NDIS_ERROR_TYPEDEF_(0xC0370020L)
//
// MessageId: ERROR_VID_MMIO_RANGE_DESTROYED
//
// MessageText:
//
//
The memory mapped I/O for this page range no longer exists. Restarting
the virtual machine may fix the problem. If the problem persists, try
restarting the physical computer.
//
#define ERROR_VID_MMIO_RANGE_DESTROYED
_NDIS_ERROR_TYPEDEF_(0xC0370021L)
//
// MessageId: ERROR_VID_INVALID_CHILD_GPA_PAGE_SET
//
// MessageText:
//
//
The lock or unlock request uses an invalid guest operating system
memory address. Restarting the virtual machine may fix the problem. If
the problem persists, try restarting the physical computer.
//
#define ERROR_VID_INVALID_CHILD_GPA_PAGE_SET
_NDIS_ERROR_TYPEDEF_(0xC0370022L)
//
// MessageId: ERROR_VID_RESERVE_PAGE_SET_IS_BEING_USED
//
// MessageText:
//
//
Cannot destroy or reuse the reserve page set for the virtualization
infrastructure driver because it is in use. Restarting the virtual
machine may fix the problem. If the problem persists, try restarting
the physical computer.
//
#define ERROR_VID_RESERVE_PAGE_SET_IS_BEING_USED
_NDIS_ERROR_TYPEDEF_(0xC0370023L)
//
// MessageId: ERROR_VID_RESERVE_PAGE_SET_TOO_SMALL
//
// MessageText:
//
//
The reserve page set for the virtualization infrastructure driver is
too small to use in the lock request. Restarting the virtual machine
may fix the problem. If the problem persists, try restarting the
physical computer.
//
#define ERROR_VID_RESERVE_PAGE_SET_TOO_SMALL
_NDIS_ERROR_TYPEDEF_(0xC0370024L)
//
// MessageId: ERROR_VID_MBP_ALREADY_LOCKED_USING_RESERVED_PAGE
//
// MessageText:
//
//
Cannot lock or map the memory block page for the virtualization
infrastructure driver because it has already been locked using a
reserve page set page. Restarting the virtual machine may fix the
problem. If the problem persists, try restarting the physical computer.
//
#define ERROR_VID_MBP_ALREADY_LOCKED_USING_RESERVED_PAGE
_NDIS_ERROR_TYPEDEF_(0xC0370025L)
//
// MessageId: ERROR_VID_MBP_COUNT_EXCEEDED_LIMIT
//
// MessageText:
//
//
Cannot create the memory block for the virtualization infrastructure
driver because the requested number of pages exceeded the limit.
Restarting the virtual machine may fix the problem. If the problem
persists, try restarting the physical computer.
//
#define ERROR_VID_MBP_COUNT_EXCEEDED_LIMIT
_NDIS_ERROR_TYPEDEF_(0xC0370026L)
//
// MessageId: ERROR_VID_SAVED_STATE_CORRUPT
//
// MessageText:
//
//
Cannot restore this virtual machine because the saved state data cannot
be read. Delete the saved state data and then try to start the virtual
machine.
//
#define ERROR_VID_SAVED_STATE_CORRUPT
_NDIS_ERROR_TYPEDEF_(0xC0370027L)
//
// MessageId: ERROR_VID_SAVED_STATE_UNRECOGNIZED_ITEM
//
// MessageText:
//
//
Cannot restore this virtual machine because an item read from the saved
state data is not recognized. Delete the saved state data and then try
to start the virtual machine.
//
#define ERROR_VID_SAVED_STATE_UNRECOGNIZED_ITEM
_NDIS_ERROR_TYPEDEF_(0xC0370028L)
//
// MessageId: ERROR_VID_SAVED_STATE_INCOMPATIBLE
//
// MessageText:
//
//
Cannot restore this virtual machine to the saved state because of
hypervisor incompatibility. Delete the saved state data and then try to
start the virtual machine.
//
#define ERROR_VID_SAVED_STATE_INCOMPATIBLE
_NDIS_ERROR_TYPEDEF_(0xC0370029L)
//
// Warnings:
//
//
// MessageId: ERROR_VID_REMOTE_NODE_PARENT_GPA_PAGES_USED
//
// MessageText:
//
//
A virtual machine is running with its memory allocated across multiple
NUMA nodes. This does not indicate a problem unless the performance of
your virtual machine is unusually slow. If you are experiencing
performance problems, you may need to modify the NUMA configuration.
For detailed information, see
http://go.microsoft.com/fwlink/?LinkId=92362.
//
#define ERROR_VID_REMOTE_NODE_PARENT_GPA_PAGES_USED
_NDIS_ERROR_TYPEDEF_(0x80370001L)
//
// Volume manager error codes mapped from status codes
//
//
// WARNINGS
//
//
// MessageId: ERROR_VOLMGR_INCOMPLETE_REGENERATION
//
// MessageText:
//
// The regeneration operation was not able to copy all data from the
active plexes due to bad sectors.
//
#define ERROR_VOLMGR_INCOMPLETE_REGENERATION
_NDIS_ERROR_TYPEDEF_(0x80380001L)
//
// MessageId: ERROR_VOLMGR_INCOMPLETE_DISK_MIGRATION
//
// MessageText:
//
//
One or more disks were not fully migrated to the target pack. They may
or may not require reimport after fixing the hardware problems.
//
#define ERROR_VOLMGR_INCOMPLETE_DISK_MIGRATION
_NDIS_ERROR_TYPEDEF_(0x80380002L)
//
// ERRORS
//
//
// MessageId: ERROR_VOLMGR_DATABASE_FULL
//
// MessageText:
//
// The configuration database is full.
//
#define
ERROR_VOLMGR_DATABASE_FULL
_NDIS_ERROR_TYPEDEF_(0xC0380001L)
//
// MessageId: ERROR_VOLMGR_DISK_CONFIGURATION_CORRUPTED
//
// MessageText:
//
// The configuration data on the disk is corrupted.
//
#define ERROR_VOLMGR_DISK_CONFIGURATION_CORRUPTED
_NDIS_ERROR_TYPEDEF_(0xC0380002L)
//
// MessageId: ERROR_VOLMGR_DISK_CONFIGURATION_NOT_IN_SYNC
//
// MessageText:
//
// The configuration on the disk is not insync with the in-memory
configuration.
//
#define ERROR_VOLMGR_DISK_CONFIGURATION_NOT_IN_SYNC
_NDIS_ERROR_TYPEDEF_(0xC0380003L)
//
// MessageId: ERROR_VOLMGR_PACK_CONFIG_UPDATE_FAILED
//
// MessageText:
//
// A majority of disks failed to be updated with the new configuration.
//
#define ERROR_VOLMGR_PACK_CONFIG_UPDATE_FAILED
_NDIS_ERROR_TYPEDEF_(0xC0380004L)
//
// MessageId: ERROR_VOLMGR_DISK_CONTAINS_NON_SIMPLE_VOLUME
//
// MessageText:
//
// The disk contains non-simple volumes.
//
#define ERROR_VOLMGR_DISK_CONTAINS_NON_SIMPLE_VOLUME
_NDIS_ERROR_TYPEDEF_(0xC0380005L)
//
// MessageId: ERROR_VOLMGR_DISK_DUPLICATE
//
// MessageText:
//
// The same disk was specified more than once in the migration list.
//
#define
ERROR_VOLMGR_DISK_DUPLICATE
_NDIS_ERROR_TYPEDEF_(0xC0380006L)
//
// MessageId: ERROR_VOLMGR_DISK_DYNAMIC
//
// MessageText:
//
// The disk is already dynamic.
//
#define
ERROR_VOLMGR_DISK_DYNAMIC
_NDIS_ERROR_TYPEDEF_(0xC0380007L)
//
// MessageId: ERROR_VOLMGR_DISK_ID_INVALID
//
// MessageText:
//
// The specified disk id is invalid. There are no disks with the
specified disk id.
//
#define
ERROR_VOLMGR_DISK_ID_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380008L)
//
// MessageId: ERROR_VOLMGR_DISK_INVALID
//
// MessageText:
//
// The specified disk is an invalid disk. Operation cannot complete on
an invalid disk.
//
#define
ERROR_VOLMGR_DISK_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380009L)
//
// MessageId: ERROR_VOLMGR_DISK_LAST_VOTER
//
// MessageText:
//
// The specified disk(s) cannot be removed since it is the last
remaining voter.
//
#define
ERROR_VOLMGR_DISK_LAST_VOTER
_NDIS_ERROR_TYPEDEF_(0xC038000AL)
//
// MessageId: ERROR_VOLMGR_DISK_LAYOUT_INVALID
//
// MessageText:
//
// The specified disk has an invalid disk layout.
//
#define ERROR_VOLMGR_DISK_LAYOUT_INVALID
_NDIS_ERROR_TYPEDEF_(0xC038000BL)
//
// MessageId:
ERROR_VOLMGR_DISK_LAYOUT_NON_BASIC_BETWEEN_BASIC_PARTITIONS
//
// MessageText:
//
// The disk layout contains non-basic partitions which appear after
basic paritions. This is an invalid disk layout.
//
#define ERROR_VOLMGR_DISK_LAYOUT_NON_BASIC_BETWEEN_BASIC_PARTITIONS
_NDIS_ERROR_TYPEDEF_(0xC038000CL)
//
// MessageId: ERROR_VOLMGR_DISK_LAYOUT_NOT_CYLINDER_ALIGNED
//
// MessageText:
//
// The disk layout contains partitions which are not cylinder aligned.
//
#define ERROR_VOLMGR_DISK_LAYOUT_NOT_CYLINDER_ALIGNED
_NDIS_ERROR_TYPEDEF_(0xC038000DL)
//
// MessageId: ERROR_VOLMGR_DISK_LAYOUT_PARTITIONS_TOO_SMALL
//
// MessageText:
//
// The disk layout contains partitions which are samller than the
minimum size.
//
#define ERROR_VOLMGR_DISK_LAYOUT_PARTITIONS_TOO_SMALL
_NDIS_ERROR_TYPEDEF_(0xC038000EL)
//
// MessageId:
ERROR_VOLMGR_DISK_LAYOUT_PRIMARY_BETWEEN_LOGICAL_PARTITIONS
//
// MessageText:
//
// The disk layout contains primary partitions in between logical
drives. This is an invalid disk layout.
//
#define ERROR_VOLMGR_DISK_LAYOUT_PRIMARY_BETWEEN_LOGICAL_PARTITIONS
_NDIS_ERROR_TYPEDEF_(0xC038000FL)
//
// MessageId: ERROR_VOLMGR_DISK_LAYOUT_TOO_MANY_PARTITIONS
//
// MessageText:
//
// The disk layout contains more than the maximum number of supported
partitions.
//
#define ERROR_VOLMGR_DISK_LAYOUT_TOO_MANY_PARTITIONS
_NDIS_ERROR_TYPEDEF_(0xC0380010L)
//
// MessageId: ERROR_VOLMGR_DISK_MISSING
//
// MessageText:
//
// The specified disk is missing. The operation cannot complete on a
missing disk.
//
#define
ERROR_VOLMGR_DISK_MISSING
_NDIS_ERROR_TYPEDEF_(0xC0380011L)
//
// MessageId: ERROR_VOLMGR_DISK_NOT_EMPTY
//
// MessageText:
//
// The specified disk is not empty.
//
#define
ERROR_VOLMGR_DISK_NOT_EMPTY
_NDIS_ERROR_TYPEDEF_(0xC0380012L)
//
// MessageId: ERROR_VOLMGR_DISK_NOT_ENOUGH_SPACE
//
// MessageText:
//
// There is not enough usable space for this operation.
//
#define ERROR_VOLMGR_DISK_NOT_ENOUGH_SPACE
_NDIS_ERROR_TYPEDEF_(0xC0380013L)
//
// MessageId: ERROR_VOLMGR_DISK_REVECTORING_FAILED
//
// MessageText:
//
// The force revectoring of bad sectors failed.
//
#define ERROR_VOLMGR_DISK_REVECTORING_FAILED
_NDIS_ERROR_TYPEDEF_(0xC0380014L)
//
// MessageId: ERROR_VOLMGR_DISK_SECTOR_SIZE_INVALID
//
// MessageText:
//
// The specified disk has an invalid sector size.
//
#define ERROR_VOLMGR_DISK_SECTOR_SIZE_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380015L)
//
// MessageId: ERROR_VOLMGR_DISK_SET_NOT_CONTAINED
//
// MessageText:
//
// The specified disk set contains volumes which exist on disks outside
of the set.
//
#define ERROR_VOLMGR_DISK_SET_NOT_CONTAINED
_NDIS_ERROR_TYPEDEF_(0xC0380016L)
//
// MessageId: ERROR_VOLMGR_DISK_USED_BY_MULTIPLE_MEMBERS
//
// MessageText:
//
// A disk in the volume layout provides extents to more than one member
of a plex.
//
#define ERROR_VOLMGR_DISK_USED_BY_MULTIPLE_MEMBERS
_NDIS_ERROR_TYPEDEF_(0xC0380017L)
//
// MessageId: ERROR_VOLMGR_DISK_USED_BY_MULTIPLE_PLEXES
//
// MessageText:
//
// A disk in the volume layout provides extents to more than one plex.
//
#define ERROR_VOLMGR_DISK_USED_BY_MULTIPLE_PLEXES
_NDIS_ERROR_TYPEDEF_(0xC0380018L)
//
// MessageId: ERROR_VOLMGR_DYNAMIC_DISK_NOT_SUPPORTED
//
// MessageText:
//
// Dynamic disks are not supported on this system.
//
#define ERROR_VOLMGR_DYNAMIC_DISK_NOT_SUPPORTED
_NDIS_ERROR_TYPEDEF_(0xC0380019L)
//
// MessageId: ERROR_VOLMGR_EXTENT_ALREADY_USED
//
// MessageText:
//
// The specified extent is already used by other volumes.
//
#define ERROR_VOLMGR_EXTENT_ALREADY_USED
_NDIS_ERROR_TYPEDEF_(0xC038001AL)
//
// MessageId: ERROR_VOLMGR_EXTENT_NOT_CONTIGUOUS
//
// MessageText:
//
//
The specified volume is retained and can only be extended into a
contiguous extent. The specified extent to grow the volume is not
contiguous with the specified volume.
//
#define ERROR_VOLMGR_EXTENT_NOT_CONTIGUOUS
_NDIS_ERROR_TYPEDEF_(0xC038001BL)
//
// MessageId: ERROR_VOLMGR_EXTENT_NOT_IN_PUBLIC_REGION
//
// MessageText:
//
// The specified volume extent is not within the public region of the
disk.
//
#define ERROR_VOLMGR_EXTENT_NOT_IN_PUBLIC_REGION
_NDIS_ERROR_TYPEDEF_(0xC038001CL)
//
// MessageId: ERROR_VOLMGR_EXTENT_NOT_SECTOR_ALIGNED
//
// MessageText:
//
// The specifed volume extent is not sector aligned.
//
#define ERROR_VOLMGR_EXTENT_NOT_SECTOR_ALIGNED
_NDIS_ERROR_TYPEDEF_(0xC038001DL)
//
// MessageId: ERROR_VOLMGR_EXTENT_OVERLAPS_EBR_PARTITION
//
// MessageText:
//
// The specified parition overlaps an EBR (the first track of an
extended partition on a MBR disks).
//
#define ERROR_VOLMGR_EXTENT_OVERLAPS_EBR_PARTITION
_NDIS_ERROR_TYPEDEF_(0xC038001EL)
//
// MessageId: ERROR_VOLMGR_EXTENT_VOLUME_LENGTHS_DO_NOT_MATCH
//
// MessageText:
//
// The specified extent lengths cannot be used to construct a volume
with specified length.
//
#define ERROR_VOLMGR_EXTENT_VOLUME_LENGTHS_DO_NOT_MATCH
_NDIS_ERROR_TYPEDEF_(0xC038001FL)
//
// MessageId: ERROR_VOLMGR_FAULT_TOLERANT_NOT_SUPPORTED
//
// MessageText:
//
// The system does not support fault tolerant volumes.
//
#define ERROR_VOLMGR_FAULT_TOLERANT_NOT_SUPPORTED
_NDIS_ERROR_TYPEDEF_(0xC0380020L)
//
// MessageId: ERROR_VOLMGR_INTERLEAVE_LENGTH_INVALID
//
// MessageText:
//
// The specified interleave length is invalid.
//
#define ERROR_VOLMGR_INTERLEAVE_LENGTH_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380021L)
//
// MessageId: ERROR_VOLMGR_MAXIMUM_REGISTERED_USERS
//
// MessageText:
//
// There is already a maximum number of registered users.
//
#define ERROR_VOLMGR_MAXIMUM_REGISTERED_USERS
_NDIS_ERROR_TYPEDEF_(0xC0380022L)
//
// MessageId: ERROR_VOLMGR_MEMBER_IN_SYNC
//
// MessageText:
//
// The specified member is already in-sync with the other active
members. It does not need to be regenerated.
//
#define
ERROR_VOLMGR_MEMBER_IN_SYNC
_NDIS_ERROR_TYPEDEF_(0xC0380023L)
//
// MessageId: ERROR_VOLMGR_MEMBER_INDEX_DUPLICATE
//
// MessageText:
//
// The same member index was specified more than once.
//
#define ERROR_VOLMGR_MEMBER_INDEX_DUPLICATE
_NDIS_ERROR_TYPEDEF_(0xC0380024L)
//
// MessageId: ERROR_VOLMGR_MEMBER_INDEX_INVALID
//
// MessageText:
//
// The specified member index is greater or equal than the number of
members in the volume plex.
//
#define ERROR_VOLMGR_MEMBER_INDEX_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380025L)
//
// MessageId: ERROR_VOLMGR_MEMBER_MISSING
//
// MessageText:
//
// The specified member is missing. It cannot be regenerated.
//
#define
ERROR_VOLMGR_MEMBER_MISSING
_NDIS_ERROR_TYPEDEF_(0xC0380026L)
//
// MessageId: ERROR_VOLMGR_MEMBER_NOT_DETACHED
//
// MessageText:
//
// The specified member is not detached. Cannot replace a member which
is not detached.
//
#define ERROR_VOLMGR_MEMBER_NOT_DETACHED
_NDIS_ERROR_TYPEDEF_(0xC0380027L)
//
// MessageId: ERROR_VOLMGR_MEMBER_REGENERATING
//
// MessageText:
//
// The specified member is already regenerating.
//
#define ERROR_VOLMGR_MEMBER_REGENERATING
_NDIS_ERROR_TYPEDEF_(0xC0380028L)
//
// MessageId: ERROR_VOLMGR_ALL_DISKS_FAILED
//
// MessageText:
//
// All disks belonging to the pack failed.
//
#define ERROR_VOLMGR_ALL_DISKS_FAILED
_NDIS_ERROR_TYPEDEF_(0xC0380029L)
//
// MessageId: ERROR_VOLMGR_NO_REGISTERED_USERS
//
// MessageText:
//
// There are currently no registered users for notifications. The task
number is irrelevant unless there are registered users.
//
#define ERROR_VOLMGR_NO_REGISTERED_USERS
_NDIS_ERROR_TYPEDEF_(0xC038002AL)
//
// MessageId: ERROR_VOLMGR_NO_SUCH_USER
//
// MessageText:
//
// The specified notification user does not exist. Failed to unregister
user for notifications.
//
#define
ERROR_VOLMGR_NO_SUCH_USER
_NDIS_ERROR_TYPEDEF_(0xC038002BL)
//
// MessageId: ERROR_VOLMGR_NOTIFICATION_RESET
//
// MessageText:
//
//
The notifications have been reset. Notifications for the current user
are invalid. Unregister and re-register for notifications.
//
#define ERROR_VOLMGR_NOTIFICATION_RESET
_NDIS_ERROR_TYPEDEF_(0xC038002CL)
//
// MessageId: ERROR_VOLMGR_NUMBER_OF_MEMBERS_INVALID
//
// MessageText:
//
// The specified number of members is invalid.
//
#define ERROR_VOLMGR_NUMBER_OF_MEMBERS_INVALID
_NDIS_ERROR_TYPEDEF_(0xC038002DL)
//
// MessageId: ERROR_VOLMGR_NUMBER_OF_PLEXES_INVALID
//
// MessageText:
//
// The specified number of plexes is invalid.
//
#define ERROR_VOLMGR_NUMBER_OF_PLEXES_INVALID
_NDIS_ERROR_TYPEDEF_(0xC038002EL)
//
// MessageId: ERROR_VOLMGR_PACK_DUPLICATE
//
// MessageText:
//
// The specified source and target packs are identical.
//
#define
ERROR_VOLMGR_PACK_DUPLICATE
_NDIS_ERROR_TYPEDEF_(0xC038002FL)
//
// MessageId: ERROR_VOLMGR_PACK_ID_INVALID
//
// MessageText:
//
// The specified pack id is invalid. There are no packs with the
specified pack id.
//
#define
ERROR_VOLMGR_PACK_ID_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380030L)
//
// MessageId: ERROR_VOLMGR_PACK_INVALID
//
// MessageText:
//
// The specified pack is the invalid pack. The operation cannot
complete with the invalid pack.
//
#define
ERROR_VOLMGR_PACK_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380031L)
//
// MessageId: ERROR_VOLMGR_PACK_NAME_INVALID
//
// MessageText:
//
// The specified pack name is invalid.
//
#define ERROR_VOLMGR_PACK_NAME_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380032L)
//
// MessageId: ERROR_VOLMGR_PACK_OFFLINE
//
// MessageText:
//
// The specified pack is offline.
//
#define
ERROR_VOLMGR_PACK_OFFLINE
_NDIS_ERROR_TYPEDEF_(0xC0380033L)
//
// MessageId: ERROR_VOLMGR_PACK_HAS_QUORUM
//
// MessageText:
//
// The specified pack already has a quorum of healthy disks.
//
#define
ERROR_VOLMGR_PACK_HAS_QUORUM
_NDIS_ERROR_TYPEDEF_(0xC0380034L)
//
// MessageId: ERROR_VOLMGR_PACK_WITHOUT_QUORUM
//
// MessageText:
//
// The pack does not have a quorum of healthy disks.
//
#define ERROR_VOLMGR_PACK_WITHOUT_QUORUM
_NDIS_ERROR_TYPEDEF_(0xC0380035L)
//
// MessageId: ERROR_VOLMGR_PARTITION_STYLE_INVALID
//
// MessageText:
//
// The specified disk has an unsupported partition style. Only MBR and
GPT partition styles are supported.
//
#define ERROR_VOLMGR_PARTITION_STYLE_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380036L)
//
// MessageId: ERROR_VOLMGR_PARTITION_UPDATE_FAILED
//
// MessageText:
//
// Failed to update the disk's partition layout.
//
#define ERROR_VOLMGR_PARTITION_UPDATE_FAILED
_NDIS_ERROR_TYPEDEF_(0xC0380037L)
//
// MessageId: ERROR_VOLMGR_PLEX_IN_SYNC
//
// MessageText:
//
// The specified plex is already in-sync with the other active plexes.
It does not need to be regenerated.
//
#define
ERROR_VOLMGR_PLEX_IN_SYNC
_NDIS_ERROR_TYPEDEF_(0xC0380038L)
//
// MessageId: ERROR_VOLMGR_PLEX_INDEX_DUPLICATE
//
// MessageText:
//
// The same plex index was specified more than once.
//
#define ERROR_VOLMGR_PLEX_INDEX_DUPLICATE
_NDIS_ERROR_TYPEDEF_(0xC0380039L)
//
// MessageId: ERROR_VOLMGR_PLEX_INDEX_INVALID
//
// MessageText:
//
// The specified plex index is greater or equal than the number of
plexes in the volume.
//
#define ERROR_VOLMGR_PLEX_INDEX_INVALID
_NDIS_ERROR_TYPEDEF_(0xC038003AL)
//
// MessageId: ERROR_VOLMGR_PLEX_LAST_ACTIVE
//
// MessageText:
//
// The specified plex is the last active plex in the volume. The plex
cannot be removed or else the volume will go offline.
//
#define ERROR_VOLMGR_PLEX_LAST_ACTIVE
_NDIS_ERROR_TYPEDEF_(0xC038003BL)
//
// MessageId: ERROR_VOLMGR_PLEX_MISSING
//
// MessageText:
//
// The specified plex is missing.
//
#define
ERROR_VOLMGR_PLEX_MISSING
_NDIS_ERROR_TYPEDEF_(0xC038003CL)
//
// MessageId: ERROR_VOLMGR_PLEX_REGENERATING
//
// MessageText:
//
// The specified plex is currently regenerating.
//
#define ERROR_VOLMGR_PLEX_REGENERATING
_NDIS_ERROR_TYPEDEF_(0xC038003DL)
//
// MessageId: ERROR_VOLMGR_PLEX_TYPE_INVALID
//
// MessageText:
//
// The specified plex type is invalid.
//
#define ERROR_VOLMGR_PLEX_TYPE_INVALID
_NDIS_ERROR_TYPEDEF_(0xC038003EL)
//
// MessageId: ERROR_VOLMGR_PLEX_NOT_RAID5
//
// MessageText:
//
// The operation is only supported on RAID-5 plexes.
//
#define
ERROR_VOLMGR_PLEX_NOT_RAID5
_NDIS_ERROR_TYPEDEF_(0xC038003FL)
//
// MessageId: ERROR_VOLMGR_PLEX_NOT_SIMPLE
//
// MessageText:
//
// The operation is only supported on simple plexes.
//
#define
ERROR_VOLMGR_PLEX_NOT_SIMPLE
_NDIS_ERROR_TYPEDEF_(0xC0380040L)
//
// MessageId: ERROR_VOLMGR_STRUCTURE_SIZE_INVALID
//
// MessageText:
//
// The Size fields in the VM_VOLUME_LAYOUT input structure are
incorrectly set.
//
#define ERROR_VOLMGR_STRUCTURE_SIZE_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380041L)
//
// MessageId: ERROR_VOLMGR_TOO_MANY_NOTIFICATION_REQUESTS
//
// MessageText:
//
//
There is already a pending request for notifications. Wait for the
existing request to return before requesting for more notifications.
//
#define ERROR_VOLMGR_TOO_MANY_NOTIFICATION_REQUESTS
_NDIS_ERROR_TYPEDEF_(0xC0380042L)
//
// MessageId: ERROR_VOLMGR_TRANSACTION_IN_PROGRESS
//
// MessageText:
//
// There is currently a transaction in process.
//
#define ERROR_VOLMGR_TRANSACTION_IN_PROGRESS
_NDIS_ERROR_TYPEDEF_(0xC0380043L)
//
// MessageId: ERROR_VOLMGR_UNEXPECTED_DISK_LAYOUT_CHANGE
//
// MessageText:
//
// An unexpected layout change occurred outside of the volume manager.
//
#define ERROR_VOLMGR_UNEXPECTED_DISK_LAYOUT_CHANGE
_NDIS_ERROR_TYPEDEF_(0xC0380044L)
//
// MessageId: ERROR_VOLMGR_VOLUME_CONTAINS_MISSING_DISK
//
// MessageText:
//
// The specified volume contains a missing disk.
//
#define ERROR_VOLMGR_VOLUME_CONTAINS_MISSING_DISK
_NDIS_ERROR_TYPEDEF_(0xC0380045L)
//
// MessageId: ERROR_VOLMGR_VOLUME_ID_INVALID
//
// MessageText:
//
// The specified volume id is invalid. There are no volumes with the
specified volume id.
//
#define ERROR_VOLMGR_VOLUME_ID_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380046L)
//
// MessageId: ERROR_VOLMGR_VOLUME_LENGTH_INVALID
//
// MessageText:
//
// The specified volume length is invalid.
//
#define ERROR_VOLMGR_VOLUME_LENGTH_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380047L)
//
// MessageId: ERROR_VOLMGR_VOLUME_LENGTH_NOT_SECTOR_SIZE_MULTIPLE
//
// MessageText:
//
// The specified size for the volume is not a multiple of the sector
size.
//
#define ERROR_VOLMGR_VOLUME_LENGTH_NOT_SECTOR_SIZE_MULTIPLE
_NDIS_ERROR_TYPEDEF_(0xC0380048L)
//
// MessageId: ERROR_VOLMGR_VOLUME_NOT_MIRRORED
//
// MessageText:
//
// The operation is only supported on mirrored volumes.
//
#define ERROR_VOLMGR_VOLUME_NOT_MIRRORED
_NDIS_ERROR_TYPEDEF_(0xC0380049L)
//
// MessageId: ERROR_VOLMGR_VOLUME_NOT_RETAINED
//
// MessageText:
//
// The specified volume does not have a retain partition.
//
#define ERROR_VOLMGR_VOLUME_NOT_RETAINED
_NDIS_ERROR_TYPEDEF_(0xC038004AL)
//
// MessageId: ERROR_VOLMGR_VOLUME_OFFLINE
//
// MessageText:
//
// The specified volume is offline.
//
#define
ERROR_VOLMGR_VOLUME_OFFLINE
_NDIS_ERROR_TYPEDEF_(0xC038004BL)
//
// MessageId: ERROR_VOLMGR_VOLUME_RETAINED
//
// MessageText:
//
// The specified volume already has a retain partition.
//
#define
ERROR_VOLMGR_VOLUME_RETAINED
_NDIS_ERROR_TYPEDEF_(0xC038004CL)
//
// MessageId: ERROR_VOLMGR_NUMBER_OF_EXTENTS_INVALID
//
// MessageText:
//
// The specified number of extents is invalid.
//
#define ERROR_VOLMGR_NUMBER_OF_EXTENTS_INVALID
_NDIS_ERROR_TYPEDEF_(0xC038004DL)
//
// MessageId: ERROR_VOLMGR_DIFFERENT_SECTOR_SIZE
//
// MessageText:
//
// All disks participating to the volume must have the same sector size.
//
#define ERROR_VOLMGR_DIFFERENT_SECTOR_SIZE
_NDIS_ERROR_TYPEDEF_(0xC038004EL)
//
// MessageId: ERROR_VOLMGR_BAD_BOOT_DISK
//
// MessageText:
//
// The boot disk experienced failures.
//
#define
ERROR_VOLMGR_BAD_BOOT_DISK
_NDIS_ERROR_TYPEDEF_(0xC038004FL)
//
// MessageId: ERROR_VOLMGR_PACK_CONFIG_OFFLINE
//
// MessageText:
//
// The configuration of the pack is offline.
//
#define ERROR_VOLMGR_PACK_CONFIG_OFFLINE
_NDIS_ERROR_TYPEDEF_(0xC0380050L)
//
// MessageId: ERROR_VOLMGR_PACK_CONFIG_ONLINE
//
// MessageText:
//
// The configuration of the pack is online.
//
#define ERROR_VOLMGR_PACK_CONFIG_ONLINE
_NDIS_ERROR_TYPEDEF_(0xC0380051L)
//
// MessageId: ERROR_VOLMGR_NOT_PRIMARY_PACK
//
// MessageText:
//
// The specified pack is not the primary pack.
//
#define ERROR_VOLMGR_NOT_PRIMARY_PACK
_NDIS_ERROR_TYPEDEF_(0xC0380052L)
//
// MessageId: ERROR_VOLMGR_PACK_LOG_UPDATE_FAILED
//
// MessageText:
//
// All disks failed to be updated with the new content of the log.
//
#define ERROR_VOLMGR_PACK_LOG_UPDATE_FAILED
_NDIS_ERROR_TYPEDEF_(0xC0380053L)
//
// MessageId: ERROR_VOLMGR_NUMBER_OF_DISKS_IN_PLEX_INVALID
//
// MessageText:
//
// The specified number of disks in a plex is invalid.
//
#define ERROR_VOLMGR_NUMBER_OF_DISKS_IN_PLEX_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380054L)
//
// MessageId: ERROR_VOLMGR_NUMBER_OF_DISKS_IN_MEMBER_INVALID
//
// MessageText:
//
// The specified number of disks in a plex member is invalid.
//
#define ERROR_VOLMGR_NUMBER_OF_DISKS_IN_MEMBER_INVALID
_NDIS_ERROR_TYPEDEF_(0xC0380055L)
//
// MessageId: ERROR_VOLMGR_VOLUME_MIRRORED
//
// MessageText:
//
// The operation is not supported on mirrored volumes.
//
#define
ERROR_VOLMGR_VOLUME_MIRRORED
_NDIS_ERROR_TYPEDEF_(0xC0380056L)
//
// MessageId: ERROR_VOLMGR_PLEX_NOT_SIMPLE_SPANNED
//
// MessageText:
//
// The operation is only supported on simple and spanned plexes.
//
#define ERROR_VOLMGR_PLEX_NOT_SIMPLE_SPANNED
_NDIS_ERROR_TYPEDEF_(0xC0380057L)
//
// MessageId: ERROR_VOLMGR_NO_VALID_LOG_COPIES
//
// MessageText:
//
// The pack has no valid log copies.
//
#define ERROR_VOLMGR_NO_VALID_LOG_COPIES
_NDIS_ERROR_TYPEDEF_(0xC0380058L)
//
// MessageId: ERROR_VOLMGR_PRIMARY_PACK_PRESENT
//
// MessageText:
//
// A primary pack is already present.
//
#define ERROR_VOLMGR_PRIMARY_PACK_PRESENT
_NDIS_ERROR_TYPEDEF_(0xC0380059L)
//
// MessageId: ERROR_VOLMGR_NUMBER_OF_DISKS_INVALID
//
// MessageText:
//
// The specified number of disks is invalid.
//
#define ERROR_VOLMGR_NUMBER_OF_DISKS_INVALID
_NDIS_ERROR_TYPEDEF_(0xC038005AL)
//
// MessageId: ERROR_VOLMGR_MIRROR_NOT_SUPPORTED
//
// MessageText:
//
// The system does not support mirrored volumes.
//
#define ERROR_VOLMGR_MIRROR_NOT_SUPPORTED
_NDIS_ERROR_TYPEDEF_(0xC038005BL)
//
// MessageId: ERROR_VOLMGR_RAID5_NOT_SUPPORTED
//
// MessageText:
//
// The system does not support RAID-5 volumes.
//
#define ERROR_VOLMGR_RAID5_NOT_SUPPORTED
_NDIS_ERROR_TYPEDEF_(0xC038005CL)
//
// Boot Code Data (BCD) error codes
//
//
// MessageId: ERROR_BCD_NOT_ALL_ENTRIES_IMPORTED
//
// MessageText:
//
// Some BCD entries were not imported correctly from the BCD store.
//
#define ERROR_BCD_NOT_ALL_ENTRIES_IMPORTED
_NDIS_ERROR_TYPEDEF_(0x80390001L)
//
// MessageId: ERROR_BCD_TOO_MANY_ELEMENTS
//
// MessageText:
//
// Entries enumerated have exceeded the allowed threshold.
//
#define
ERROR_BCD_TOO_MANY_ELEMENTS
_NDIS_ERROR_TYPEDEF_(0xC0390002L)
//
// MessageId: ERROR_BCD_NOT_ALL_ENTRIES_SYNCHRONIZED
//
// MessageText:
//
// Some BCD entries were not synchronized correctly with the firmware.
//
#define ERROR_BCD_NOT_ALL_ENTRIES_SYNCHRONIZED
_NDIS_ERROR_TYPEDEF_(0x80390003L)
//
// Vhd error codes - These codes are used by the virtual hard
diskparser component.
//
//
// Errors:
//
//
// MessageId: ERROR_VHD_DRIVE_FOOTER_MISSING
//
// MessageText:
//
// The virtual hard disk is corrupted. The virtual hard disk drive
footer is missing.
//
#define ERROR_VHD_DRIVE_FOOTER_MISSING
_NDIS_ERROR_TYPEDEF_(0xC03A0001L)
//
// MessageId: ERROR_VHD_DRIVE_FOOTER_CHECKSUM_MISMATCH
//
// MessageText:
//
// The virtual hard disk is corrupted. The virtual hard disk drive
footer checksum does not match the on-disk checksum.
//
#define ERROR_VHD_DRIVE_FOOTER_CHECKSUM_MISMATCH
_NDIS_ERROR_TYPEDEF_(0xC03A0002L)
//
// MessageId: ERROR_VHD_DRIVE_FOOTER_CORRUPT
//
// MessageText:
//
// The virtual hard disk is corrupted. The virtual hard disk drive
footer in the virtual hard disk is corrupted.
//
#define ERROR_VHD_DRIVE_FOOTER_CORRUPT
_NDIS_ERROR_TYPEDEF_(0xC03A0003L)
//
// MessageId: ERROR_VHD_FORMAT_UNKNOWN
//
// MessageText:
//
// The system does not recognize the file format of this virtual hard
disk.
//
#define
ERROR_VHD_FORMAT_UNKNOWN
_NDIS_ERROR_TYPEDEF_(0xC03A0004L)
//
// MessageId: ERROR_VHD_FORMAT_UNSUPPORTED_VERSION
//
// MessageText:
//
// The version does not support this version of the file format.
//
#define ERROR_VHD_FORMAT_UNSUPPORTED_VERSION
_NDIS_ERROR_TYPEDEF_(0xC03A0005L)
//
// MessageId: ERROR_VHD_SPARSE_HEADER_CHECKSUM_MISMATCH
//
// MessageText:
//
// The virtual hard disk is corrupted. The sparse header checksum does
not match the on-disk checksum.
//
#define ERROR_VHD_SPARSE_HEADER_CHECKSUM_MISMATCH
_NDIS_ERROR_TYPEDEF_(0xC03A0006L)
//
// MessageId: ERROR_VHD_SPARSE_HEADER_UNSUPPORTED_VERSION
//
// MessageText:
//
// The system does not support this version of the virtual hard
disk.This version of the sparse header is not supported.
//
#define ERROR_VHD_SPARSE_HEADER_UNSUPPORTED_VERSION
_NDIS_ERROR_TYPEDEF_(0xC03A0007L)
//
// MessageId: ERROR_VHD_SPARSE_HEADER_CORRUPT
//
// MessageText:
//
// The virtual hard disk is corrupted. The sparse header in the virtual
hard disk is corrupt.
//
#define ERROR_VHD_SPARSE_HEADER_CORRUPT
_NDIS_ERROR_TYPEDEF_(0xC03A0008L)
//
// MessageId: ERROR_VHD_BLOCK_ALLOCATION_FAILURE
//
// MessageText:
//
// Failed to write to the virtual hard disk failed because the system
failed to allocate a new block in the virtual hard disk.
//
#define ERROR_VHD_BLOCK_ALLOCATION_FAILURE
_NDIS_ERROR_TYPEDEF_(0xC03A0009L)
//
// MessageId: ERROR_VHD_BLOCK_ALLOCATION_TABLE_CORRUPT
//
// MessageText:
//
// The virtual hard disk is corrupted. The block allocation table in
the virtual hard disk is corrupt.
//
#define ERROR_VHD_BLOCK_ALLOCATION_TABLE_CORRUPT
_NDIS_ERROR_TYPEDEF_(0xC03A000AL)
//
// MessageId: ERROR_VHD_INVALID_BLOCK_SIZE
//
// MessageText:
//
// The system does not support this version of the virtual hard disk.
The block size is invalid.
//
#define
ERROR_VHD_INVALID_BLOCK_SIZE
_NDIS_ERROR_TYPEDEF_(0xC03A000BL)
//
// MessageId: ERROR_VHD_BITMAP_MISMATCH
//
// MessageText:
//
// The virtual hard disk is corrupted. The block bitmap does not match
with the block data present in the virtual hard disk.
//
#define
ERROR_VHD_BITMAP_MISMATCH
_NDIS_ERROR_TYPEDEF_(0xC03A000CL)
//
// MessageId: ERROR_VHD_PARENT_VHD_NOT_FOUND
//
// MessageText:
//
// The chain of virtual hard disks is broken. The system cannot locate
the parent virtual hard disk for the differencing disk.
//
#define ERROR_VHD_PARENT_VHD_NOT_FOUND
_NDIS_ERROR_TYPEDEF_(0xC03A000DL)
//
// MessageId: ERROR_VHD_CHILD_PARENT_ID_MISMATCH
//
// MessageText:
//
//
The chain of virtual hard disks is corrupted. There is a mismatch in
the identifiers of the parent virtual hard disk and differencing disk.
//
#define ERROR_VHD_CHILD_PARENT_ID_MISMATCH
_NDIS_ERROR_TYPEDEF_(0xC03A000EL)
//
// MessageId: ERROR_VHD_CHILD_PARENT_TIMESTAMP_MISMATCH
//
// MessageText:
//
//
The chain of virtual hard disks is corrupted. The time stamp of the
parent virtual hard disk does not match the time stamp of the
differencing disk.
//
#define ERROR_VHD_CHILD_PARENT_TIMESTAMP_MISMATCH
_NDIS_ERROR_TYPEDEF_(0xC03A000FL)
//
// MessageId: ERROR_VHD_METADATA_READ_FAILURE
//
// MessageText:
//
// Failed to read the metadata of the virtual hard disk.
//
#define ERROR_VHD_METADATA_READ_FAILURE
_NDIS_ERROR_TYPEDEF_(0xC03A0010L)
//
// MessageId: ERROR_VHD_METADATA_WRITE_FAILURE
//
// MessageText:
//
// Failed to write to the metadata of the virtual hard disk.
//
#define ERROR_VHD_METADATA_WRITE_FAILURE
_NDIS_ERROR_TYPEDEF_(0xC03A0011L)
//
// MessageId: ERROR_VHD_INVALID_SIZE
//
// MessageText:
//
// The size of the virtual hard disk is not valid.
//
#define
ERROR_VHD_INVALID_SIZE
_NDIS_ERROR_TYPEDEF_(0xC03A0012L)
//
// MessageId: ERROR_VHD_INVALID_FILE_SIZE
//
// MessageText:
//
// The file size of this virtual hard disk is not valid.
//
#define
ERROR_VHD_INVALID_FILE_SIZE
_NDIS_ERROR_TYPEDEF_(0xC03A0013L)
//
// MessageId: ERROR_VIRTDISK_PROVIDER_NOT_FOUND
//
// MessageText:
//
// A virtual disk support provider for the specified file was not found.
//
#define ERROR_VIRTDISK_PROVIDER_NOT_FOUND
_NDIS_ERROR_TYPEDEF_(0xC03A0014L)
//
// MessageId: ERROR_VIRTDISK_NOT_VIRTUAL_DISK
//
// MessageText:
//
// The specified disk is not a virtual disk.
//
#define ERROR_VIRTDISK_NOT_VIRTUAL_DISK
_NDIS_ERROR_TYPEDEF_(0xC03A0015L)
//
// MessageId: ERROR_VHD_PARENT_VHD_ACCESS_DENIED
//
// MessageText:
//
//
The chain of virtual hard disks is inaccessible. The process has not
been granted access rights to the parent virtual hard disk for the
differencing disk.
//
#define ERROR_VHD_PARENT_VHD_ACCESS_DENIED
_NDIS_ERROR_TYPEDEF_(0xC03A0016L)
//
// MessageId: ERROR_VHD_CHILD_PARENT_SIZE_MISMATCH
//
// MessageText:
//
//
The chain of virtual hard disks is corrupted. There is a mismatch in
the virtual sizes of the parent virtual hard disk and differencing disk.
//
#define ERROR_VHD_CHILD_PARENT_SIZE_MISMATCH
_NDIS_ERROR_TYPEDEF_(0xC03A0017L)
//
// MessageId: ERROR_VHD_DIFFERENCING_CHAIN_CYCLE_DETECTED
//
// MessageText:
//
// The chain of virtual hard disks is corrupted. A differencing disk is
indicated in its own parent chain.
//
#define ERROR_VHD_DIFFERENCING_CHAIN_CYCLE_DETECTED
_NDIS_ERROR_TYPEDEF_(0xC03A0018L)
//
// MessageId: ERROR_VHD_DIFFERENCING_CHAIN_ERROR_IN_PARENT
//
// MessageText:
//
// The chain of virtual hard disks is inaccessible. There was an error
opening a virtual hard disk further up the chain.
//
#define ERROR_VHD_DIFFERENCING_CHAIN_ERROR_IN_PARENT
_NDIS_ERROR_TYPEDEF_(0xC03A0019L)
//
// MessageId: ERROR_VIRTUAL_DISK_LIMITATION
//
// MessageText:
//
//
The requested operation could not be completed due to a virtual disk
system limitation. Virtual disks are only supported on NTFS
volumes and must be both uncompressed and unencrypted.
//
#define ERROR_VIRTUAL_DISK_LIMITATION
_NDIS_ERROR_TYPEDEF_(0xC03A001AL)
//
// MessageId: ERROR_VHD_INVALID_TYPE
//
// MessageText:
//
// The requested operation cannot be performed on a virtual disk of
this type.
//
#define
ERROR_VHD_INVALID_TYPE
_NDIS_ERROR_TYPEDEF_(0xC03A001BL)
//
// MessageId: ERROR_VHD_INVALID_STATE
//
// MessageText:
//
// The requested operation cannot be performed on the virtual disk in
its current state.
//
#define
ERROR_VHD_INVALID_STATE
_NDIS_ERROR_TYPEDEF_(0xC03A001CL)
//
// MessageId: ERROR_VIRTDISK_UNSUPPORTED_DISK_SECTOR_SIZE
//
// MessageText:
//
// The sector size of the physical disk on which the virtual disk
resides is not supported.
//
#define ERROR_VIRTDISK_UNSUPPORTED_DISK_SECTOR_SIZE
_NDIS_ERROR_TYPEDEF_(0xC03A001DL)
//
// Warnings:
//
//
// MessageId: ERROR_QUERY_STORAGE_ERROR
//
// MessageText:
//
// The virtualization storage subsystem has generated an error.
//
#define
ERROR_QUERY_STORAGE_ERROR
_NDIS_ERROR_TYPEDEF_(0x803A0001L)
//
// =======================================================
// Facility Scripted Diagnostics (SDIAG) Error Messages
// =======================================================
//
//
// MessageId: SDIAG_E_CANCELLED
//
// MessageText:
//
// The operation was cancelled.
//
#define
SDIAG_E_CANCELLED
_NDIS_ERROR_TYPEDEF_(0x803C0100L)
//
// MessageId: SDIAG_E_SCRIPT
//
// MessageText:
//
// An error occurred when running a PowerShell script.
//
#define
SDIAG_E_SCRIPT
_NDIS_ERROR_TYPEDEF_(0x803C0101L)
//
// MessageId: SDIAG_E_POWERSHELL
//
// MessageText:
//
// An error occurred when interacting with PowerShell runtime.
//
#define
SDIAG_E_POWERSHELL
_NDIS_ERROR_TYPEDEF_(0x803C0102L)
//
// MessageId: SDIAG_E_MANAGEDHOST
//
// MessageText:
//
// An error occurred in the Scripted Diagnostic Managed Host.
//
#define
SDIAG_E_MANAGEDHOST
_NDIS_ERROR_TYPEDEF_(0x803C0103L)
//
// MessageId: SDIAG_E_NOVERIFIER
//
// MessageText:
//
// The troubleshooting pack does not contain a required verifier to
complete the verification.
//
#define
SDIAG_E_NOVERIFIER
_NDIS_ERROR_TYPEDEF_(0x803C0104L)
//
// MessageId: SDIAG_S_CANNOTRUN
//
// MessageText:
//
// The troubleshooting pack cannot be executed on this system.
//
#define
SDIAG_S_CANNOTRUN
_NDIS_ERROR_TYPEDEF_(0x003C0105L)
//
// MessageId: SDIAG_E_DISABLED
//
// MessageText:
//
// Scripted diagnostics is disabled by group policy.
//
#define
SDIAG_E_DISABLED
_NDIS_ERROR_TYPEDEF_(0x803C0106L)
//
// MessageId: SDIAG_E_TRUST
//
// MessageText:
//
// Trust validation of the troubleshooting pack failed.
//
#define
SDIAG_E_TRUST
_NDIS_ERROR_TYPEDEF_(0x803C0107L)
//
// MessageId: SDIAG_E_CANNOTRUN
//
// MessageText:
//
// The troubleshooting pack cannot be executed on this system.
//
#define
SDIAG_E_CANNOTRUN
_NDIS_ERROR_TYPEDEF_(0x803C0108L)
//
// MessageId: SDIAG_E_VERSION
//
// MessageText:
//
// This version of the troubleshooting pack is not supported.
//
#define
SDIAG_E_VERSION
_NDIS_ERROR_TYPEDEF_(0x803C0109L)
//
// MessageId: SDIAG_E_RESOURCE
//
// MessageText:
//
// A required resource cannot be loaded.
//
#define
SDIAG_E_RESOURCE
_NDIS_ERROR_TYPEDEF_(0x803C010AL)
//
// MessageId: SDIAG_E_ROOTCAUSE
//
// MessageText:
//
// The troubleshooting pack reported information for a root cause
without adding the root cause.
//
#define
SDIAG_E_ROOTCAUSE
_NDIS_ERROR_TYPEDEF_(0x803C010BL)
//
// MBN error codes
//
//
// MessageId: E_MBN_CONTEXT_NOT_ACTIVATED
//
// MessageText:
//
// Context is not activated.
//
#define
E_MBN_CONTEXT_NOT_ACTIVATED
_HRESULT_TYPEDEF_(0x80548201L)
//
// MessageId: E_MBN_BAD_SIM
//
// MessageText:
//
// Bad SIM is inserted.
//
#define
E_MBN_BAD_SIM
_HRESULT_TYPEDEF_(0x80548202L)
//
// MessageId: E_MBN_DATA_CLASS_NOT_AVAILABLE
//
// MessageText:
//
// Requested data class is not avaialable.
//
#define E_MBN_DATA_CLASS_NOT_AVAILABLE
_HRESULT_TYPEDEF_(0x80548203L)
//
// MessageId: E_MBN_INVALID_ACCESS_STRING
//
// MessageText:
//
// Access point name (APN) or Access string is incorrect.
//
#define
E_MBN_INVALID_ACCESS_STRING
_HRESULT_TYPEDEF_(0x80548204L)
//
// MessageId: E_MBN_MAX_ACTIVATED_CONTEXTS
//
// MessageText:
//
// Max activated contexts have reached.
//
#define
E_MBN_MAX_ACTIVATED_CONTEXTS
_HRESULT_TYPEDEF_(0x80548205L)
//
// MessageId: E_MBN_PACKET_SVC_DETACHED
//
// MessageText:
//
// Device is in packet detach state.
//
#define
E_MBN_PACKET_SVC_DETACHED
_HRESULT_TYPEDEF_(0x80548206L)
//
// MessageId: E_MBN_PROVIDER_NOT_VISIBLE
//
// MessageText:
//
// Provider is not visible.
//
#define
E_MBN_PROVIDER_NOT_VISIBLE
_HRESULT_TYPEDEF_(0x80548207L)
//
// MessageId: E_MBN_RADIO_POWER_OFF
//
// MessageText:
//
// Radio is powered off.
//
#define
E_MBN_RADIO_POWER_OFF
_HRESULT_TYPEDEF_(0x80548208L)
//
// MessageId: E_MBN_SERVICE_NOT_ACTIVATED
//
// MessageText:
//
// MBN subscription is not activated.
//
#define
E_MBN_SERVICE_NOT_ACTIVATED
_HRESULT_TYPEDEF_(0x80548209L)
//
// MessageId: E_MBN_SIM_NOT_INSERTED
//
// MessageText:
//
// SIM is not inserted.
//
#define
E_MBN_SIM_NOT_INSERTED
_HRESULT_TYPEDEF_(0x8054820AL)
//
// MessageId: E_MBN_VOICE_CALL_IN_PROGRESS
//
// MessageText:
//
// Voice call in progress.
//
#define
E_MBN_VOICE_CALL_IN_PROGRESS
_HRESULT_TYPEDEF_(0x8054820BL)
//
// MessageId: E_MBN_INVALID_CACHE
//
// MessageText:
//
// Visible provider cache is invalid.
//
#define
E_MBN_INVALID_CACHE
_HRESULT_TYPEDEF_(0x8054820CL)
//
// MessageId: E_MBN_NOT_REGISTERED
//
// MessageText:
//
// Device is not registered.
//
#define
E_MBN_NOT_REGISTERED
_HRESULT_TYPEDEF_(0x8054820DL)
//
// MessageId: E_MBN_PROVIDERS_NOT_FOUND
//
// MessageText:
//
// Providers not found.
//
#define
E_MBN_PROVIDERS_NOT_FOUND
_HRESULT_TYPEDEF_(0x8054820EL)
//
// MessageId: E_MBN_PIN_NOT_SUPPORTED
//
// MessageText:
//
// Pin is not supported.
//
#define
E_MBN_PIN_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x8054820FL)
//
// MessageId: E_MBN_PIN_REQUIRED
//
// MessageText:
//
// Pin is required.
//
#define
E_MBN_PIN_REQUIRED
_HRESULT_TYPEDEF_(0x80548210L)
//
// MessageId: E_MBN_PIN_DISABLED
//
// MessageText:
//
// PIN is disabled.
//
#define
E_MBN_PIN_DISABLED
_HRESULT_TYPEDEF_(0x80548211L)
//
// MessageId: E_MBN_FAILURE
//
// MessageText:
//
// Generic Failure.
//
#define
E_MBN_FAILURE
_HRESULT_TYPEDEF_(0x80548212L)
//
Profile related error messages
//
// MessageId: E_MBN_INVALID_PROFILE
//
// MessageText:
//
// Profile is invalid.
//
#define
E_MBN_INVALID_PROFILE
_HRESULT_TYPEDEF_(0x80548218L)
//
// MessageId: E_MBN_DEFAULT_PROFILE_EXIST
//
// MessageText:
//
// Default profile exist.
//
#define
E_MBN_DEFAULT_PROFILE_EXIST
_HRESULT_TYPEDEF_(0x80548219L)
//
SMS related error messages
//
// MessageId: E_MBN_SMS_ENCODING_NOT_SUPPORTED
//
// MessageText:
//
// SMS encoding is not supported.
//
#define E_MBN_SMS_ENCODING_NOT_SUPPORTED _HRESULT_TYPEDEF_(0x80548220L)
//
// MessageId: E_MBN_SMS_FILTER_NOT_SUPPORTED
//
// MessageText:
//
// SMS filter is not supported.
//
#define E_MBN_SMS_FILTER_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80548221L)
//
// MessageId: E_MBN_SMS_INVALID_MEMORY_INDEX
//
// MessageText:
//
// Invalid SMS memory index is used.
//
#define E_MBN_SMS_INVALID_MEMORY_INDEX
_HRESULT_TYPEDEF_(0x80548222L)
//
// MessageId: E_MBN_SMS_LANG_NOT_SUPPORTED
//
// MessageText:
//
// SMS language is not supported.
//
#define
E_MBN_SMS_LANG_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80548223L)
//
// MessageId: E_MBN_SMS_MEMORY_FAILURE
//
// MessageText:
//
// SMS memory failure occurred.
//
#define
E_MBN_SMS_MEMORY_FAILURE
_HRESULT_TYPEDEF_(0x80548224L)
//
// MessageId: E_MBN_SMS_NETWORK_TIMEOUT
//
// MessageText:
//
// SMS network timeout happened.
//
#define
E_MBN_SMS_NETWORK_TIMEOUT
_HRESULT_TYPEDEF_(0x80548225L)
//
// MessageId: E_MBN_SMS_UNKNOWN_SMSC_ADDRESS
//
// MessageText:
//
// Unknown SMSC address is used.
//
#define E_MBN_SMS_UNKNOWN_SMSC_ADDRESS
_HRESULT_TYPEDEF_(0x80548226L)
//
// MessageId: E_MBN_SMS_FORMAT_NOT_SUPPORTED
//
// MessageText:
//
// SMS format is not supported.
//
#define E_MBN_SMS_FORMAT_NOT_SUPPORTED
_HRESULT_TYPEDEF_(0x80548227L)
//
// MessageId: E_MBN_SMS_OPERATION_NOT_ALLOWED
//
// MessageText:
//
// SMS operation is not allowed.
//
#define E_MBN_SMS_OPERATION_NOT_ALLOWED
_HRESULT_TYPEDEF_(0x80548228L)
//
// MessageId: E_MBN_SMS_MEMORY_FULL
//
// MessageText:
//
// Device SMS memory is full.
//
#define
E_MBN_SMS_MEMORY_FULL
_HRESULT_TYPEDEF_(0x80548229L)
//
// UI error codes
//
//
// MessageId: UI_E_CREATE_FAILED
//
// MessageText:
//
// The object could not be created.
//
#define
UI_E_CREATE_FAILED
_HRESULT_TYPEDEF_(0x802A0001L)
//
// MessageId: UI_E_SHUTDOWN_CALLED
//
// MessageText:
//
// Shutdown was already called on this object or the object that owns
it.
//
#define
UI_E_SHUTDOWN_CALLED
_HRESULT_TYPEDEF_(0x802A0002L)
//
// MessageId: UI_E_ILLEGAL_REENTRANCY
//
// MessageText:
//
// This method cannot be called during this type of callback.
//
#define
UI_E_ILLEGAL_REENTRANCY
_HRESULT_TYPEDEF_(0x802A0003L)
//
// MessageId: UI_E_OBJECT_SEALED
//
// MessageText:
//
// This object has been sealed, so this change is no longer allowed.
//
#define
UI_E_OBJECT_SEALED
_HRESULT_TYPEDEF_(0x802A0004L)
//
// MessageId: UI_E_VALUE_NOT_SET
//
// MessageText:
//
// The requested value was never set.
//
#define
UI_E_VALUE_NOT_SET
_HRESULT_TYPEDEF_(0x802A0005L)
//
// MessageId: UI_E_VALUE_NOT_DETERMINED
//
// MessageText:
//
// The requested value cannot be determined.
//
#define
UI_E_VALUE_NOT_DETERMINED
_HRESULT_TYPEDEF_(0x802A0006L)
//
// MessageId: UI_E_INVALID_OUTPUT
//
// MessageText:
//
// A callback returned an invalid output parameter.
//
#define
UI_E_INVALID_OUTPUT
_HRESULT_TYPEDEF_(0x802A0007L)
//
// MessageId: UI_E_BOOLEAN_EXPECTED
//
// MessageText:
//
// A callback returned a success code other than S_OK or S_FALSE.
//
#define
UI_E_BOOLEAN_EXPECTED
_HRESULT_TYPEDEF_(0x802A0008L)
//
// MessageId: UI_E_DIFFERENT_OWNER
//
// MessageText:
//
// A parameter that should be owned by this object is owned by a
different object.
//
#define
UI_E_DIFFERENT_OWNER
_HRESULT_TYPEDEF_(0x802A0009L)
//
// MessageId: UI_E_AMBIGUOUS_MATCH
//
// MessageText:
//
// More than one item matched the search criteria.
//
#define
UI_E_AMBIGUOUS_MATCH
_HRESULT_TYPEDEF_(0x802A000AL)
//
// MessageId: UI_E_FP_OVERFLOW
//
// MessageText:
//
// A floating-point overflow occurred.
//
#define
UI_E_FP_OVERFLOW
_HRESULT_TYPEDEF_(0x802A000BL)
//
// MessageId: UI_E_WRONG_THREAD
//
// MessageText:
//
// This method can only be called from the thread that created the
object.
//
#define
UI_E_WRONG_THREAD
_HRESULT_TYPEDEF_(0x802A000CL)
//
// MessageId: UI_E_STORYBOARD_ACTIVE
//
// MessageText:
//
// The storyboard is currently in the schedule.
//
#define
UI_E_STORYBOARD_ACTIVE
_HRESULT_TYPEDEF_(0x802A0101L)
//
// MessageId: UI_E_STORYBOARD_NOT_PLAYING
//
// MessageText:
//
// The storyboard is not playing.
//
#define
UI_E_STORYBOARD_NOT_PLAYING
_HRESULT_TYPEDEF_(0x802A0102L)
//
// MessageId: UI_E_START_KEYFRAME_AFTER_END
//
// MessageText:
//
// The start keyframe might occur after the end keyframe.
//
#define UI_E_START_KEYFRAME_AFTER_END
_HRESULT_TYPEDEF_(0x802A0103L)
//
// MessageId: UI_E_END_KEYFRAME_NOT_DETERMINED
//
// MessageText:
//
// It might not be possible to determine the end keyframe time when the
start keyframe is reached.
//
#define UI_E_END_KEYFRAME_NOT_DETERMINED _HRESULT_TYPEDEF_(0x802A0104L)
//
// MessageId: UI_E_LOOPS_OVERLAP
//
// MessageText:
//
// Two repeated portions of a storyboard might overlap.
//
#define
UI_E_LOOPS_OVERLAP
_HRESULT_TYPEDEF_(0x802A0105L)
//
// MessageId: UI_E_TRANSITION_ALREADY_USED
//
// MessageText:
//
// The transition has already been added to a storyboard.
//
#define
UI_E_TRANSITION_ALREADY_USED
_HRESULT_TYPEDEF_(0x802A0106L)
//
// MessageId: UI_E_TRANSITION_NOT_IN_STORYBOARD
//
// MessageText:
//
// The transition has not been added to a storyboard.
//
#define UI_E_TRANSITION_NOT_IN_STORYBOARD _HRESULT_TYPEDEF_(0x802A0107L)
//
// MessageId: UI_E_TRANSITION_ECLIPSED
//
// MessageText:
//
// The transition might eclipse the beginning of another transition in
the storyboard.
//
#define
UI_E_TRANSITION_ECLIPSED
_HRESULT_TYPEDEF_(0x802A0108L)
//
// MessageId: UI_E_TIME_BEFORE_LAST_UPDATE
//
// MessageText:
//
// The given time is earlier than the time passed to the last update.
//
#define
UI_E_TIME_BEFORE_LAST_UPDATE
_HRESULT_TYPEDEF_(0x802A0109L)
//
// MessageId: UI_E_TIMER_CLIENT_ALREADY_CONNECTED
//
// MessageText:
//
// This client is already connected to a timer.
//
#define UI_E_TIMER_CLIENT_ALREADY_CONNECTED
_HRESULT_TYPEDEF_(0x802A010AL)
#endif//_WINERR OR_